Satya Prasad has over 9 years of experience as an electrical and automation engineer, with expertise in project management, planning, execution, and commissioning of power plants, steel mills, and other major industrial projects. He holds a PMP certification and has successfully led projects worth over $1 billion. Currently he serves as Manager of Product Development at Jindal Steel & Power Limited, where he oversees the 1.4 MTPA capacity bar mill and analyzes rolling processes. He seeks a managerial role managing major projects for a reputable organization.

1. Satya Prasad, PMP®,9 yrs
Email: satya.jspl@gmail.com | Contact Number: +91-9777443276
Job Objective
Seeking managerial assignments in Project Management,project lead for erection and
commissioning of switchyards, power plants, steel and rolling mills with a leading
organization of repute.
Profile Summary
• A PMP certified Electrical And Automation engineer with over 9 yrs of diverse experience in
Major Projects from Project Conceptualization to Project Closure.
• Following PMI standards to ensure timely completion of Project within approved budget.
• Adopt in executing and spearheading various site, engineering & technical activities.
• Collaborate with concerned stakeholders in initiating the project and defining proposals.
• Expertise in planning, Scheduling ,Erection and commissioning of Greenfield and expansion
construction projects with a flair for adopting modern construction methodologies in compliance
with quality standards by using the tool of Primavera.
• Experience of handling Major EPC projects like power plants, switchyards, steel and rolling
mills starting from conceptualization, engineering ,erection ,commissioning .
• Experience of handling Major Electrical and Automation equipments of voltage ranges from
400kv to 24v(Transformers, Motors, Vvfdrives, Plc, Iba analyzer ) right from review of enquiry
specifications , review of prebid technical offers,discussion with vedndors for technical
clarification,technical evalution report preparation, review of post order engineering, during
various phases of my professional carreer.
• Preparation of Design Basis Memorandum / Report, Sizing Calculations for HV/MV
Equipments including Switchyard Equipments, Review of Layouts for Electrical System viz,
Cabling Earthing Lighting & Lightening Protection.
CORE COMPETENCY
-Project Planning & Coordination -Project Execution & Commissioning
- Strategic Planning -Management Collaboration
-Scheduling & Monitoring -Procurement
- SAP -Project Management
- Drives and Process Automation Mills(S7-400) -Stake Holder Management
- Planning scheduling and tracking with Primavera P6 -Preparation of BOQ for Electrical projects
- Testing of Transformers and Motors -Analization of rolling process with IBA
- Preparation of cable interconnection schedules and cable tray routing
PROJECTS HANDLED
• 1.4 MTPA Bar Mill Project-Jindal Steel & Power Limited, Angul, Odisha.
• 187500 TPA Heat Treatment Project-Jindal Steel & Power Limited, Angul, Odisha.
• 1.2 MTPA Plate Mill Project-Jindal Steel & Power Limited, Angul, Odisha.
• 400KV Switchyard Project – Jindal Steel & Power Limited, Angul, Odisha.
• 16MW Co-Gen Power Plant –G.M.R.Industries Limited,Sankili, Andhra Pradesh.
EMPLOYEMNT DETAILS
Product development of 1.4MTPA CAPACITY Barmill with Jindal Steel & Power Limited as Manager –
(May’2016-Present)
• Development of various sizes ranging from 8 to 40 mm along with SMS MEER with designed rolling
speed of 45 m/s.
• Analyzing of rolling process signals with IBA analyzer and make corrections if necessary in the plc(S7-
400).
• Monthly and weekly Maintenance schedule preparation .
• Planning and procurement of critical as well as regular spares.

2. Project Management & Execution with Jindal Steel & Power Limited as Manager – (2015- May’2016)
Project Name: Bar Mill (1.4 MTPA Capacity, Highest capacity Mill in the world)
Cost of project: INR 615 Cr.
Technology Supplier: SMS Meer
As An Electrical and Automation in charge in EPC of Bar Mill Project. My work key highlights
include:-( with team of 10 members)
• Evaluation of process technology & Layout optimization in terms of overall integration of value
chain and evaluation of finished products.
• Involved in Project Feasibility, Conceptualization & Finalization.
• Project Planning- Preparation of schedule in Primavera, assisting PMO team in preparation of
L1-L6 schedules, Preparation of S Curves, Earned Value Analysis & Bulk Material
Reconciliation. Conducting risk assessment, preparation of risk register, prioritization of risk
and planning for risk mitigation.
• Finalization of all electrical and automation packages (approx 30 crores) right from Review of
Enquiry specifications to post order engineering.
• Finalization of Electrical budget in line with Project’s as well as the organization’s Capex
approval system.
• Attending Engg Co-ordination/Review meetings with Customer/Customer Consultants. Obtain
approval from customer / Customer Consultants.
• Worked on preparing work breakdown structure in accordance to Organization’s ERP module.
• Involved in Project Procurement & Project Finance- Preparation & updation of Procurement &
Post order tracker- keeping a tab on inspection & timely delivery of material. Ensuring proper
vendor management timely delivery of material & managing technical & commercial terms.
• Make sure automation schemes are developed as per operational requirement with
SMSMEER.
• Completion of erection, testing and commissioning of all Electrical and Automation
Equipments(Transformers,motors,Vvf Drives, plc) within the stipulated time to roll the first
billet
As per schedule.
• Cross checking of cable schedules given by technology supplier and consultant with process
requirements and implement any changes if required.
• Complete Erection and commissioning of 245t/hr Walking beam furnace and 22 stand split
line and 14 stand centre line , finishing line, utilities of total Barmill in the aspects total
Electrical and automation.
• Played crucial role in this project to complete the total project with budget of just 520 CR where
as allotted budget is INR 615 CR. Within the schedule also.
Project Planning & Coordination, Commissioning with Jindal Steel & Power Limited as Deputy Manager/
Assistant Manager – (2013- 2015)
Project Name: Heat Treatment Complex (187500 TPA Capacity)
Cost of project: INR 424 Cr. Technology Supplier:
SPCO Japan & LOI Germany
Work Highlights:-
• Finalization of principle Erection contractor and engineering consultant for total project.
• Proactively Coordinating with Internal departments for fulfilling all regulatory norms well ahead in
time for various project & operation related activities.
• Development of contracts & procurement strategy for the project .
• Excellent relationship management, analytical and negotiation skills with deftness in swiftly ramping
up projects in co-ordination with Vendors and consultants.
• Preparation of BOQ as per Technical specification for Procurement.
• Finalisation of Automation Block Diagram and get the approval from consultant for the same.
• Erection And Commissioning of Complete Automation System (Drives, Automation,Plc S7-400 and
Safety Plc, Siemens Micro Master).
• Commissioning of multiple pass Heat leveler which is supplied by M/s Spco,japan. We completed
this commisiing one month before as per actual schedule.
• Erection and commissioning (Drives, automation)of two furnaces which were supplied by LOI
Germany which are analogue Furnaces having all Burners controlled by BCU’s . Establish the
network between different PLC’s to exchange the data through DP-DP coupler or TCP/IP protocol.
• Responsible for total line which is also includes one short blasting machine commissioning as per
process requirement along with M/S SPCO, M/S LOI team.

3. Construction Planning & Execution with Jindal Steel & Power Limited as DyManager/Assistant
Manager– (2010-2013)
Project Name: 5000 mm wide Greenfield Plate Mill Project (1.2 MTPA)
Cost of project: INR 2032 Cr.
Technology Supplier: Siemens VAI
Work Highlights :-
• Review of Enquiry specifications for major Electrical Equipments prior to release for enquiry.
Review of Pre-Bid Technical Offers, Discussion with Vendors for Technical Clarifications, Technical
Evaluation Report, Review of Post Order Vendor Engineering, for interfacing with other Electrical
Equipments.
• Review Transformer Sizing Calculations and selected transformer ratings and prepare LT SWGR
Specifications co-relating the feeder list. of Cable Schedules, Cable Interconnection Schedules
prepared for interfaces.
• Attending Engg Co-ordination/Review meetings within Disciplines for interfaces.
• Hands on experience having Electrical and Automation works of around 750 KM cabling,400KM
Tray laying,60 Transformers(1 to 31.5 MVA) of upto 33kv.
• Commissioning of 2x10 MW synchronous motor with MV drive (Sinamics SM 150) and LV Master
Drives.
• I/O checking,establishment of communication and trouble shooting in PLC(S7-400 & PCS-7).
• Coordination with other stakeholders during commissioning.
• Preparation of micro schedules based on the master schedule, executing & maintaining a issue log
for smooth execution of Job.
• Resource planning with the Contractor, ensuring improved Productivity with properly sequencing
the job.
• Reviewed & approved QAP, WPS / PQR & witnessed vendor’sr performance qualification tests
along with Bureau Veritas India.
• Certification of RA bills and material reconciliation.Cable schedule preparation and proper front
planning for laying of cables(Lt,control).
• Certification of RA bills and material reconciliation.
• Commissioning of 4-HI stand mill ,Mulpic cooling sytem to cool the plates, entire shear line which
includes Double Shear trim Shear, Divide Shear, Coolingbed , inspection bed, Universal testing
Machine supplied by GE.
• Erection and commissioning of 33kv and 6.6 kv switchboards and Relay Co-ordination.
Planning & Execution with Jindal Steel & Power Limited as Assistant Manager/Graduate
Engineering Trainee– (2008-2010)
Project Name: 400KV Switch Yard
Cost of project: INR 800 Cr.
Technology Supplier: Alstom
• Assisting to project head in EPC of Switch yard project
• Procurement of transformers 120(220/33/6.5kv) MVA & 312(400/220/33kv) MVA & Out door
Switchgear.
• Preparation of Single Line Diagram.
• Verification of control schemes of protection circuits as well as for switchyard automation
• Testing of Transformers(routine tests, tan delta,magnetic balance test and vector group test etc)
switchgear(contact resistance,Hipot),Current Transformer(knee point,ratio and magnetic balance).
• Good knowledge of usage of MICOM and ABB relays.
• Resource planning with the Contractor, ensuring improved Productivity with properly sequencing
the Erection and commissioning activities.
Planning & Execution with G.M.R.Industries limited as Graduate Engineering Trainee– (2007-
2008)
• As a trainee I was involved in commissioning of TG set 16 MW in biomass Cogen Power Plant .
• operation and maintenance of TG set 16 MW in biomass Cogen Power Plant for the period of six
Months.
• Testing and Commissioning transformers in 132/33kv switchyard.
• Material Mangement by using SAP Module.

4. ACADEMIC DETAILS
• PGDBA (Operations) from Sybiosis Centre for Distance Learning in 2011.
• B.E. (Electrical And Electronics) from G.M.R Institute of Technology, Andhra Pradesh in 2007 with
68.85%
• 12th from Shiva Juniour College , Andhra Pradesh in 2002 with 86% .
• 10th from Z.P.H School, Andhra Pradesh in 2000 with 83%.
IT SKILLS
• Knowledge of Primavera 6, MS Project, MS Office,Wincc,S7-Plc, Auto CAD and SAP.
MAJOR CREDENTIALS
• PMP Certification from PMI in Dec -2015.
• Nominated as the executive of the month for aug-2014.
• Trained and Certified for Siemens MV Drives from Siemens Erlangen – Germany(Dec 2010).
PERSONAL DETAILS
Date of Birth: 10th July 1985
Language Proficiency: Telugu,English and Hindi
Notice Period: 2 months