This document provides product information on the Predator floodlight by Holophane, including:
- It offers versatility, efficiency, and performance for a variety of lighting needs.
- It can generate wide, narrow, and spot distributions and withstand harsh environments, allowing use in diverse applications.
- Flexibility is maximized with its 360° swivel mounting yoke and quick disconnect removable door for easy maintenance.
The Turbolite is a high powered compressed air lamp certified for use in hazardous areas like oil and gas facilities. It provides safer lighting than low voltage options in wet and flammable gas conditions. The A-TL44 model has an all-round bay light, while the A-TL45 has a reflector head for direct or wide-angle illumination. Both have spark-free brass casings and are designed for harsh industrial use. They require a clean, dry compressed air supply to operate efficiently and prevent lens contamination.
This document provides a list of commercial products from Innovative Water Treatment Products, including cooling tower products, biocides, closed loop treatments, and plumbing and HVAC tools. It describes each product's purpose and application. Contact information is provided at the top for inquiries.
Fire Rated, LSOH (Low Smoke Zero Halogen LSF) Junction Box Enclosures IEC 331
(750°C for 3 hours) & BS6387 (950°C for 3 hours - Flame Only)
Fire Rated Electrical Enclosures - Mild, Stainless Steel, GRP
When installing essential electrical systems such as emergency lighting or fire safety controls, great emphasis is placed upon the fire survivability of the critical components such as fire dampers, actuators and cables that are contained in the area. Often the specification of the junction boxes and enclosures is neglected with respect to fire resistance and survival. On the basis that any system is only as good as the weakest part, it is important that attention is paid to the junction boxes being utilised for essential systems.
Abtech ensure the fire survival of junction boxes using both the SX (stainless steel enclosure) and BPG (GRP enclosure) ranges.
Fire Rated Electrical Enclosures Tested to IEC 331 - SX Enclosure Range :
IEC331 - 750 Degrees celsius for 3 hours - flame only - PASSED
BS6387 C - 950 Degrees celsius for 3 hours - flame only - PASSED
BS6387 Z - 950 Degrees celius for 3 hours - external impact - PASSED
BS6387 W - 950 Degrees celsius for 3 hours - water spray - PASSED
Abtech SX and BPG electrical enclosures and junction boxes when fitted with ceramic terminals are suitable for use in areas designated to require fire resistant cables according to IEC331, BS6387 C (fire alone), BS6387 Z (impact test) and BS6387 W (fire with water test).
Fire Protection & Emergency System Junction Boxes & Electrical EnclosuresThorne & Derrick UK
The document describes WKE terminal boxes for industrial and emergency systems offering up to 90 minutes of fire protection and IP54 ingress protection. It lists several WKE terminal box models ranging from 2 to 5 poles made of high temperature ceramic or thermoset plastic materials and providing flame protection classes E30 to E90 according to DIN 4102 standards. Additional WKE terminal box models for public facilities are described offering up to IP66 ingress protection, 30 minutes flame protection, and halogen-free thermosetting plastic construction. Contact information is provided for Thorne and Derrick UK.
The document discusses glass reinforced polyester enclosures from the BPG range. It describes the material as highly resistant to contamination and suitable for low smoke and halogen applications. The enclosures are molded from SMC rather than DMC glass reinforced polyester for greater mechanical strength. They meet fire resistance standards and ingress protection ratings of IP66/67. The document provides specifications, dimensions, and accessories for 16 enclosure sizes that are suitable for hazardous and industrial applications.
1. The document describes the SX range of enclosures, which are available in mild steel or stainless steel in various standard sizes.
2. The enclosures feature hinged, lift-off doors with captive screws, internal/external earthing, and optional gland plates and accessories.
3. The SX enclosures are suitable for hazardous areas and have various international certifications. They provide IP66/IP67 protection and wide temperature ranges.
This document provides product information for multiple series of lighting products, including LED lights, spotlights, floodlights, and low bay lights. For each series, it lists ordering references correlated to light source and wattage. It also provides dimensions, specifications, applications, characteristics, and performance details. Technical specifications include ingress protection ratings, operating temperatures, voltage inputs, weight, and more. Applications listed include indoor uses like factories, warehouses, and outdoor uses like construction sites.
Abtech ZAG Aluminium Enclosures & Junction Boxes for Hazardous Areas
Abtech Aluminium Electrical Enclosures & Junction Boxes (Zone 1 & 2, ATEX) - Abtech ZAG
The Abtech ZAG range of aluminium enclosures and junction boxes includes 19 sizes that are precision die cast in Al Si 12 grade (LM24) aluminum alloy - the most suitable grade of aluminum for maximum corrosion resistance of junction boxes, especially in salt and corrosive atmospheres.
The Abtech ZAG range of aluminium enclosures and junction boxes have many features for use in a wide range of electrical applications - including industrial and hazardous area junction boxes and OEM applications where the excellent machining qualities of aluminium are preferred.
The Abtech ZAG range of aluminium enclosures and junction boxes can be machined, drilled, tapped with various thread forms and readily accepts most paint finishes and colours.
Abtech ZAG Aluminium Enclosures & Junction Boxes
Abtech ZAG Aluminium Enclosures & Junction Boxes, Features :
Wide operating temperature (-70 to +130 degrees Celsius)
Ingress protection to IP67, Corrosion resistant
Zone 1 & 2 hazardous area certified - UL, CSA, ATEX, GOST approved
Hazardous Area Certified Aluminium Enclosures & Junction Boxes
Abtech ZAG enclosures and junction boxes carry global hazardous area certifications - ATEX EEx'e' to BSEN50019 (Zone 1 & 2), EEX'nA' to BSEN50021 (Zone 2), NEMA 4X (CSA, UL & FM Class 1 Div 2).
The Turbolite is a high powered compressed air lamp certified for use in hazardous areas like oil and gas facilities. It provides safer lighting than low voltage options in wet and flammable gas conditions. The A-TL44 model has an all-round bay light, while the A-TL45 has a reflector head for direct or wide-angle illumination. Both have spark-free brass casings and are designed for harsh industrial use. They require a clean, dry compressed air supply to operate efficiently and prevent lens contamination.
This document provides a list of commercial products from Innovative Water Treatment Products, including cooling tower products, biocides, closed loop treatments, and plumbing and HVAC tools. It describes each product's purpose and application. Contact information is provided at the top for inquiries.
Fire Rated, LSOH (Low Smoke Zero Halogen LSF) Junction Box Enclosures IEC 331
(750°C for 3 hours) & BS6387 (950°C for 3 hours - Flame Only)
Fire Rated Electrical Enclosures - Mild, Stainless Steel, GRP
When installing essential electrical systems such as emergency lighting or fire safety controls, great emphasis is placed upon the fire survivability of the critical components such as fire dampers, actuators and cables that are contained in the area. Often the specification of the junction boxes and enclosures is neglected with respect to fire resistance and survival. On the basis that any system is only as good as the weakest part, it is important that attention is paid to the junction boxes being utilised for essential systems.
Abtech ensure the fire survival of junction boxes using both the SX (stainless steel enclosure) and BPG (GRP enclosure) ranges.
Fire Rated Electrical Enclosures Tested to IEC 331 - SX Enclosure Range :
IEC331 - 750 Degrees celsius for 3 hours - flame only - PASSED
BS6387 C - 950 Degrees celsius for 3 hours - flame only - PASSED
BS6387 Z - 950 Degrees celius for 3 hours - external impact - PASSED
BS6387 W - 950 Degrees celsius for 3 hours - water spray - PASSED
Abtech SX and BPG electrical enclosures and junction boxes when fitted with ceramic terminals are suitable for use in areas designated to require fire resistant cables according to IEC331, BS6387 C (fire alone), BS6387 Z (impact test) and BS6387 W (fire with water test).
Fire Protection & Emergency System Junction Boxes & Electrical EnclosuresThorne & Derrick UK
The document describes WKE terminal boxes for industrial and emergency systems offering up to 90 minutes of fire protection and IP54 ingress protection. It lists several WKE terminal box models ranging from 2 to 5 poles made of high temperature ceramic or thermoset plastic materials and providing flame protection classes E30 to E90 according to DIN 4102 standards. Additional WKE terminal box models for public facilities are described offering up to IP66 ingress protection, 30 minutes flame protection, and halogen-free thermosetting plastic construction. Contact information is provided for Thorne and Derrick UK.
The document discusses glass reinforced polyester enclosures from the BPG range. It describes the material as highly resistant to contamination and suitable for low smoke and halogen applications. The enclosures are molded from SMC rather than DMC glass reinforced polyester for greater mechanical strength. They meet fire resistance standards and ingress protection ratings of IP66/67. The document provides specifications, dimensions, and accessories for 16 enclosure sizes that are suitable for hazardous and industrial applications.
1. The document describes the SX range of enclosures, which are available in mild steel or stainless steel in various standard sizes.
2. The enclosures feature hinged, lift-off doors with captive screws, internal/external earthing, and optional gland plates and accessories.
3. The SX enclosures are suitable for hazardous areas and have various international certifications. They provide IP66/IP67 protection and wide temperature ranges.
This document provides product information for multiple series of lighting products, including LED lights, spotlights, floodlights, and low bay lights. For each series, it lists ordering references correlated to light source and wattage. It also provides dimensions, specifications, applications, characteristics, and performance details. Technical specifications include ingress protection ratings, operating temperatures, voltage inputs, weight, and more. Applications listed include indoor uses like factories, warehouses, and outdoor uses like construction sites.
Abtech ZAG Aluminium Enclosures & Junction Boxes for Hazardous Areas
Abtech Aluminium Electrical Enclosures & Junction Boxes (Zone 1 & 2, ATEX) - Abtech ZAG
The Abtech ZAG range of aluminium enclosures and junction boxes includes 19 sizes that are precision die cast in Al Si 12 grade (LM24) aluminum alloy - the most suitable grade of aluminum for maximum corrosion resistance of junction boxes, especially in salt and corrosive atmospheres.
The Abtech ZAG range of aluminium enclosures and junction boxes have many features for use in a wide range of electrical applications - including industrial and hazardous area junction boxes and OEM applications where the excellent machining qualities of aluminium are preferred.
The Abtech ZAG range of aluminium enclosures and junction boxes can be machined, drilled, tapped with various thread forms and readily accepts most paint finishes and colours.
Abtech ZAG Aluminium Enclosures & Junction Boxes
Abtech ZAG Aluminium Enclosures & Junction Boxes, Features :
Wide operating temperature (-70 to +130 degrees Celsius)
Ingress protection to IP67, Corrosion resistant
Zone 1 & 2 hazardous area certified - UL, CSA, ATEX, GOST approved
Hazardous Area Certified Aluminium Enclosures & Junction Boxes
Abtech ZAG enclosures and junction boxes carry global hazardous area certifications - ATEX EEx'e' to BSEN50019 (Zone 1 & 2), EEX'nA' to BSEN50021 (Zone 2), NEMA 4X (CSA, UL & FM Class 1 Div 2).
The Airturbo lamp is certified for use in hazardous industrial areas like oil and gas facilities. It uses compressed air to power a turbine that generates electricity to power its halogen bulb, allowing it to operate continuously even underwater. Two models are available: the A-0444 bay light provides 360-degree illumination, while the A-0445 flood light offers a 30-degree beam or concentrated spotlight. Both lamps have protective housings and safety features like instantly shutting off if the lens breaks. A clean, dry air supply is required for efficient operation.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
This document provides information on the VDY series of incandescent lighting fixtures from NAMBUK Electric Co. It includes three sections:
1. An overview of the VDY series, which are weatherproof fixtures intended for industrial applications where weather damage is a concern.
2. Technical specifications for the VDY fixtures, including materials, finishes, certifications, and photometric data.
3. Dimensional drawings and ordering information.
This document provides information on 3M Scotchcast 82-F and 82-BF Series Flexible Power Cable Splicing Kits. The kits are used to make permanent inline and tap splices for non-shielded portable power cables and cords rated up to 1000 Volts. Each kit contains molding materials and instructions to splice single or multi-conductor cables. The completed splices are flexible, flame retardant and can be used in various outdoor and submerged environments. The document outlines specifications, installation instructions, and performance test results for the splicing kits.
Cooper Crouse Hinds NVMV Series Ex Protected Luminaire for IEC and ATEX Applications - Ex Pendant Light Fittings For Hazardous Area Gas & Dust Environments
This document provides information on electrical products and services from Jarel Export for hazardous areas. It describes Jarel Export's specialization in hazardous area electrical products including lighting, control systems, power distribution, motor starters, and other equipment. Technical specifications and certifications are provided for several example products like bolted sockets, cable glands, luminaires, and motors.
Lewden Electrical Industries has been supplying Electrical Equipment to Industry for over 60 years, established in 1946, Lewden Metal Products as it was then known, developed an expertise in the Metal Die-casting and Machining of products for the Electrical and Components Industry.
Palazzoli plugs, sockets and interlocked socket outlets for industrial, hazardous area (ATEX certified), marine and general low voltage power distribution, control, protection and signalling devices.
Palazzoli Industrial Overview - Industrial distribution boards, Industrial socket outlets, Industrial plugs, Industrial enclosures, Protection and signalling devices, Lighting appliances, Control devices, Protection devices, Inter-locked socket outlets, Mobile plug and socket outlets, Straight plugs.
Palazzoli ATEX Overview - ATEX plugs, ATEX inter-locked sockets, ATEX enclosures, ATEX protection and signalling devices, ATEX lighting.
Lewden Electrical - Palazzoli ATEX Solutions for Explosive Atmospheres: Industrial Plugs & Sockets, ATEX Enclosures, Cable Glands & Fittings, ATEX Control Devices, Lighting Fixtures & Signalling Devices.
The document summarizes portable lighting products from Wolf Safety Lamp Company that are approved for use in explosive atmospheres. It includes ATEX approved fluorescent lead lamps, torches, headlamps, handlamps, and floodlights powered by batteries or compressed air that provide lighting for hazardous environments in industries like oil, gas, and mining. It also lists the certifications and specifications for each product line.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
The document describes the AOK iR Series LED Recessed Canopy Light. It has a simplistic and recessed design specialized for gas stations. It provides high luminous efficacy up to 130lm/w and long lifespan over 62,000 hours. It uses reliable LED technology and has excellent heat dissipation to control temperature, ensuring long performance. It comes with an 8-year warranty and is available in various wattages and sizes to replace common HID canopy lights.
AOK iR Series LED Canopy Light & Recessed Gas Station Light DatasheetBonnie Lin
The document describes the AOK iR Series LED recessed canopy lights for gas stations. Key features include a simplistic and recessed design optimized for gas stations, luminous efficacy up to 130lm/w and lifespan over 62,000 hours, and models ranging from 80W to 160W output to replace common HID canopy lights. The lights use reliable LED technology and precision temperature control to ensure long lifetime even in varying outdoor conditions.
Walsall Equipment is a British manufacturer of electrical equipment for hazardous, wet, and dusty environments. It has offices worldwide including Europe, Asia, Africa, and Australia. The company produces a wide range of ATEX-approved products for zone 1, 2, 21, and 22 applications, including junction boxes, lighting, control stations, and cable management systems. It has a purpose-built manufacturing facility with advanced equipment and invests heavily in new technology and product development.
This document discusses replacing oxygen and acetylene cutting equipment on ships with more modern plasma cutting technology. It introduces the Hypertherm PowerMax30 Air plasma cutter, which has a built-in air compressor so no air lines are needed. This makes the equipment more portable and eliminates the costs, safety issues, and logistics of using oxygen and acetylene cylinders. It also presents the MULTIPEARL 200-4 XL inverter as a multi-process welder and the Superfire 2 torch for brazing and heating work.
This document provides information about Amar Prem's summer training completed at Bharat Heavy Electricals Limited (Insulator Plant) in Jagdishpur, Uttar Pradesh from June 1st to June 30th, 2016. It includes a certificate signed by his supervisor, Gaurav Pandey, certifying that Amar Prem was cooperative, sincere, and hard working during his training. The document also includes an acknowledgement from Amar Prem thanking BHEL staff for their guidance. Finally, it outlines the various manufacturing processes at the BHEL insulator plant, including sections on insulators, the power distribution plan, calibration lab, ceramic lab, boiler, and detailed descriptions of manufacturing insulators and ceralins.
The ATEX Turbolite is a high-powered compressed air lamp that meets European and American safety standards for use in explosive atmospheres. It provides illumination for hazardous industrial activities like tank cleaning and pipeline work. Models include area lights and flood lights available in aluminum or brass housings. The lamp is powered by a turbine driven by compressed air, which generates electricity to power a halogen bulb. It has improvements like sealed bearings and stainless steel components for greater reliability.
AOK-i Series Highbay Light Datasheet from LibertyLiberty Dong
The AOK i Series was designed to be used as high bay, flood, or tunnel lighting. It has a simplistic design and is suitable for indoor and outdoor applications like warehouses, stadiums, and tunnels. The document discusses the LED technology, heat dissipation, and protection of the LED sources. It also provides information on multiple light distribution options and sample installation projects to demonstrate the i Series lights.
Hadar Hazardous Area (ATEX) Lighting ranges are suitable for explosive atmosphere environments and are certified to Zone 1, Ex e, Ex d and Zone 2 Ex n hazardous areas – fluorescent, recessed, portable, bulkhead, wellglass, floodlight and LED hazardous area lighting ranges.
The Hadar hazardous area lighting ranges comprises one of the most up to date and innovative lighting portfolios - suitable for explosive atmospheres the range of Hadar hazardous area lighting is certified to Zone 1 & 21, Ex e, Ex d, and Zone 2 & 22 Ex n.
The Hadar Lighting Ex e products feature the “End of Life” (EoL) protection circuit ballast according to DIN EN 61347-2-3 and IEC 60079-7 Ed.4.
Hadar Hazardous Area Lighting is a specialist manufacturer of hazardous area lighting for the oil, gas, petro-chemical, pharmaceutical, offshore and marine industries worldwide offering the design and production of lighting products for Zone 1, 2, 21 & 22, Gas and Dust - this includes ATEX and IEC Ex Explosion Proof Exe & Ex d Lighting ranges : fluorescent, recessed, helideck, LED floodlight, bulkhead and well glass.
AOK i Series LED High Bay & Flood &Tunnel Light DatasheetBonnie Lin
The AOK i Series was designed to be used as high bay lighting, flood lighting, and tunnel lighting in indoor and outdoor applications like warehouses, sports stadiums, and tunnels. It has a simplistic design and is suitable for environments from -40°C to 50°C. It offers high luminous efficacy up to 130lm/w and a long lifespan over 62,000 hours. It provides reliable and efficient LED lighting through temperature control and protection of the LED sources.
The document provides information on SF6 gas circuit breakers, including:
1) It describes the GI-E range of outdoor circuit breakers, which use SF6 gas for switching and insulation and are suitable for distribution systems up to 40.5 kV.
2) The advantages of the circuit breakers are discussed, including their reliability, low maintenance needs, and insensitivity to environmental conditions.
3) Testing procedures are outlined to ensure safety and reliability in accordance with IEC standards.
The Airturbo lamp is certified for use in hazardous industrial areas like oil and gas facilities. It uses compressed air to power a turbine that generates electricity to power its halogen bulb, allowing it to operate continuously even underwater. Two models are available: the A-0444 bay light provides 360-degree illumination, while the A-0445 flood light offers a 30-degree beam or concentrated spotlight. Both lamps have protective housings and safety features like instantly shutting off if the lens breaks. A clean, dry air supply is required for efficient operation.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
This document provides information on the VDY series of incandescent lighting fixtures from NAMBUK Electric Co. It includes three sections:
1. An overview of the VDY series, which are weatherproof fixtures intended for industrial applications where weather damage is a concern.
2. Technical specifications for the VDY fixtures, including materials, finishes, certifications, and photometric data.
3. Dimensional drawings and ordering information.
This document provides information on 3M Scotchcast 82-F and 82-BF Series Flexible Power Cable Splicing Kits. The kits are used to make permanent inline and tap splices for non-shielded portable power cables and cords rated up to 1000 Volts. Each kit contains molding materials and instructions to splice single or multi-conductor cables. The completed splices are flexible, flame retardant and can be used in various outdoor and submerged environments. The document outlines specifications, installation instructions, and performance test results for the splicing kits.
Cooper Crouse Hinds NVMV Series Ex Protected Luminaire for IEC and ATEX Applications - Ex Pendant Light Fittings For Hazardous Area Gas & Dust Environments
This document provides information on electrical products and services from Jarel Export for hazardous areas. It describes Jarel Export's specialization in hazardous area electrical products including lighting, control systems, power distribution, motor starters, and other equipment. Technical specifications and certifications are provided for several example products like bolted sockets, cable glands, luminaires, and motors.
Lewden Electrical Industries has been supplying Electrical Equipment to Industry for over 60 years, established in 1946, Lewden Metal Products as it was then known, developed an expertise in the Metal Die-casting and Machining of products for the Electrical and Components Industry.
Palazzoli plugs, sockets and interlocked socket outlets for industrial, hazardous area (ATEX certified), marine and general low voltage power distribution, control, protection and signalling devices.
Palazzoli Industrial Overview - Industrial distribution boards, Industrial socket outlets, Industrial plugs, Industrial enclosures, Protection and signalling devices, Lighting appliances, Control devices, Protection devices, Inter-locked socket outlets, Mobile plug and socket outlets, Straight plugs.
Palazzoli ATEX Overview - ATEX plugs, ATEX inter-locked sockets, ATEX enclosures, ATEX protection and signalling devices, ATEX lighting.
Lewden Electrical - Palazzoli ATEX Solutions for Explosive Atmospheres: Industrial Plugs & Sockets, ATEX Enclosures, Cable Glands & Fittings, ATEX Control Devices, Lighting Fixtures & Signalling Devices.
The document summarizes portable lighting products from Wolf Safety Lamp Company that are approved for use in explosive atmospheres. It includes ATEX approved fluorescent lead lamps, torches, headlamps, handlamps, and floodlights powered by batteries or compressed air that provide lighting for hazardous environments in industries like oil, gas, and mining. It also lists the certifications and specifications for each product line.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
The document describes the AOK iR Series LED Recessed Canopy Light. It has a simplistic and recessed design specialized for gas stations. It provides high luminous efficacy up to 130lm/w and long lifespan over 62,000 hours. It uses reliable LED technology and has excellent heat dissipation to control temperature, ensuring long performance. It comes with an 8-year warranty and is available in various wattages and sizes to replace common HID canopy lights.
AOK iR Series LED Canopy Light & Recessed Gas Station Light DatasheetBonnie Lin
The document describes the AOK iR Series LED recessed canopy lights for gas stations. Key features include a simplistic and recessed design optimized for gas stations, luminous efficacy up to 130lm/w and lifespan over 62,000 hours, and models ranging from 80W to 160W output to replace common HID canopy lights. The lights use reliable LED technology and precision temperature control to ensure long lifetime even in varying outdoor conditions.
Walsall Equipment is a British manufacturer of electrical equipment for hazardous, wet, and dusty environments. It has offices worldwide including Europe, Asia, Africa, and Australia. The company produces a wide range of ATEX-approved products for zone 1, 2, 21, and 22 applications, including junction boxes, lighting, control stations, and cable management systems. It has a purpose-built manufacturing facility with advanced equipment and invests heavily in new technology and product development.
This document discusses replacing oxygen and acetylene cutting equipment on ships with more modern plasma cutting technology. It introduces the Hypertherm PowerMax30 Air plasma cutter, which has a built-in air compressor so no air lines are needed. This makes the equipment more portable and eliminates the costs, safety issues, and logistics of using oxygen and acetylene cylinders. It also presents the MULTIPEARL 200-4 XL inverter as a multi-process welder and the Superfire 2 torch for brazing and heating work.
This document provides information about Amar Prem's summer training completed at Bharat Heavy Electricals Limited (Insulator Plant) in Jagdishpur, Uttar Pradesh from June 1st to June 30th, 2016. It includes a certificate signed by his supervisor, Gaurav Pandey, certifying that Amar Prem was cooperative, sincere, and hard working during his training. The document also includes an acknowledgement from Amar Prem thanking BHEL staff for their guidance. Finally, it outlines the various manufacturing processes at the BHEL insulator plant, including sections on insulators, the power distribution plan, calibration lab, ceramic lab, boiler, and detailed descriptions of manufacturing insulators and ceralins.
The ATEX Turbolite is a high-powered compressed air lamp that meets European and American safety standards for use in explosive atmospheres. It provides illumination for hazardous industrial activities like tank cleaning and pipeline work. Models include area lights and flood lights available in aluminum or brass housings. The lamp is powered by a turbine driven by compressed air, which generates electricity to power a halogen bulb. It has improvements like sealed bearings and stainless steel components for greater reliability.
AOK-i Series Highbay Light Datasheet from LibertyLiberty Dong
The AOK i Series was designed to be used as high bay, flood, or tunnel lighting. It has a simplistic design and is suitable for indoor and outdoor applications like warehouses, stadiums, and tunnels. The document discusses the LED technology, heat dissipation, and protection of the LED sources. It also provides information on multiple light distribution options and sample installation projects to demonstrate the i Series lights.
Hadar Hazardous Area (ATEX) Lighting ranges are suitable for explosive atmosphere environments and are certified to Zone 1, Ex e, Ex d and Zone 2 Ex n hazardous areas – fluorescent, recessed, portable, bulkhead, wellglass, floodlight and LED hazardous area lighting ranges.
The Hadar hazardous area lighting ranges comprises one of the most up to date and innovative lighting portfolios - suitable for explosive atmospheres the range of Hadar hazardous area lighting is certified to Zone 1 & 21, Ex e, Ex d, and Zone 2 & 22 Ex n.
The Hadar Lighting Ex e products feature the “End of Life” (EoL) protection circuit ballast according to DIN EN 61347-2-3 and IEC 60079-7 Ed.4.
Hadar Hazardous Area Lighting is a specialist manufacturer of hazardous area lighting for the oil, gas, petro-chemical, pharmaceutical, offshore and marine industries worldwide offering the design and production of lighting products for Zone 1, 2, 21 & 22, Gas and Dust - this includes ATEX and IEC Ex Explosion Proof Exe & Ex d Lighting ranges : fluorescent, recessed, helideck, LED floodlight, bulkhead and well glass.
AOK i Series LED High Bay & Flood &Tunnel Light DatasheetBonnie Lin
The AOK i Series was designed to be used as high bay lighting, flood lighting, and tunnel lighting in indoor and outdoor applications like warehouses, sports stadiums, and tunnels. It has a simplistic design and is suitable for environments from -40°C to 50°C. It offers high luminous efficacy up to 130lm/w and a long lifespan over 62,000 hours. It provides reliable and efficient LED lighting through temperature control and protection of the LED sources.
The document provides information on SF6 gas circuit breakers, including:
1) It describes the GI-E range of outdoor circuit breakers, which use SF6 gas for switching and insulation and are suitable for distribution systems up to 40.5 kV.
2) The advantages of the circuit breakers are discussed, including their reliability, low maintenance needs, and insensitivity to environmental conditions.
3) Testing procedures are outlined to ensure safety and reliability in accordance with IEC standards.
Height and depth gauge linear metrology.pdfq30122000
Height gauges may also be used to measure the height of an object by using the underside of the scriber as the datum. The datum may be permanently fixed or the height gauge may have provision to adjust the scale, this is done by sliding the scale vertically along the body of the height gauge by turning a fine feed screw at the top of the gauge; then with the scriber set to the same level as the base, the scale can be matched to it. This adjustment allows different scribers or probes to be used, as well as adjusting for any errors in a damaged or resharpened probe.
This presentation is about Food Delivery Systems and how they are developed using the Software Development Life Cycle (SDLC) and other methods. It explains the steps involved in creating a food delivery app, from planning and designing to testing and launching. The slide also covers different tools and technologies used to make these systems work efficiently.
Sri Guru Hargobind Ji - Bandi Chor Guru.pdfBalvir Singh
Sri Guru Hargobind Ji (19 June 1595 - 3 March 1644) is revered as the Sixth Nanak.
• On 25 May 1606 Guru Arjan nominated his son Sri Hargobind Ji as his successor. Shortly
afterwards, Guru Arjan was arrested, tortured and killed by order of the Mogul Emperor
Jahangir.
• Guru Hargobind's succession ceremony took place on 24 June 1606. He was barely
eleven years old when he became 6th Guru.
• As ordered by Guru Arjan Dev Ji, he put on two swords, one indicated his spiritual
authority (PIRI) and the other, his temporal authority (MIRI). He thus for the first time
initiated military tradition in the Sikh faith to resist religious persecution, protect
people’s freedom and independence to practice religion by choice. He transformed
Sikhs to be Saints and Soldier.
• He had a long tenure as Guru, lasting 37 years, 9 months and 3 days
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...DharmaBanothu
The Network on Chip (NoC) has emerged as an effective
solution for intercommunication infrastructure within System on
Chip (SoC) designs, overcoming the limitations of traditional
methods that face significant bottlenecks. However, the complexity
of NoC design presents numerous challenges related to
performance metrics such as scalability, latency, power
consumption, and signal integrity. This project addresses the
issues within the router's memory unit and proposes an enhanced
memory structure. To achieve efficient data transfer, FIFO buffers
are implemented in distributed RAM and virtual channels for
FPGA-based NoC. The project introduces advanced FIFO-based
memory units within the NoC router, assessing their performance
in a Bi-directional NoC (Bi-NoC) configuration. The primary
objective is to reduce the router's workload while enhancing the
FIFO internal structure. To further improve data transfer speed,
a Bi-NoC with a self-configurable intercommunication channel is
suggested. Simulation and synthesis results demonstrate
guaranteed throughput, predictable latency, and equitable
network access, showing significant improvement over previous
designs
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.
Digital Twins Computer Networking Paper Presentation.pptxaryanpankaj78
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
Null Bangalore | Pentesters Approach to AWS IAMDivyanshu
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Supermarket Management System Project Report.pdfKamal Acharya
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
AI in customer support Use cases solutions development and implementation.pdfmahaffeycheryld
AI in customer support will integrate with emerging technologies such as augmented reality (AR) and virtual reality (VR) to enhance service delivery. AR-enabled smart glasses or VR environments will provide immersive support experiences, allowing customers to visualize solutions, receive step-by-step guidance, and interact with virtual support agents in real-time. These technologies will bridge the gap between physical and digital experiences, offering innovative ways to resolve issues, demonstrate products, and deliver personalized training and support.
https://www.leewayhertz.com/ai-in-customer-support/#How-does-AI-work-in-customer-support
2. Tenon mount
Yoke mount
Predator
The Predator floodlight offers versatility,
efficiency, and performance, which provides a
unique solution to a variety of lighting needs.
With the Predator luminaire, Holophane
continues its legacy of utilizing technology
to develop creative and innovative lighting
solutions.
Because the Predator luminaire is capable of
generating wide, narrow, and spot
distributions and is able to withstand harsh
environmental extremes, it can be used in a
range of diverse applications.
Flexibility in mounting positions is maximized
with its 360° yoke. The quick disconnect
removable door, which includes all electrical
components, can be replaced in 60 seconds,
resulting in decreased costs and downtime.
®
Knuckle mount
HOLOPHANE®
|Outdoor Lighting INFRASTRUCTURE
| Predator 57
INFRASTRUCTURE
Product Catalog
ToledoMuseumofArt;Toledo,Ohio
3. Typical Applications
• Bridges
• Paper Mills
• Power Plants
• Petrochemical Plants
• Wastewater Facilities
• Building Facades
• Parking Lots
• Outdoor Security
Features
• Variety of distributions
• Extended component life
• Variety of mounting methods
• UL and CUL listed for general and
hazardous locations
Lamp Types
• 175-400 watt metal halide, also available in
energy saving
• 50-400 watt high pressure sodium, also
available in energy saving
Approvals
• UL/CUL 1598
• Class I, Marine Outside
Class I, Div 2; Class II, Div I; Class III, Div I
and Marine Outside
• Wet location
• Marine Outside
Applications
Predator
58
FLOODLIGHTING
4. Predator “CI” Fixtures
Class I, Division 2
Groups A, B, C, D
Hazardous Locations
The Predator luminaire has been
designed and tested in accordance with
UL Standard 844. Therefore, it complies
with Article 501.9(B) (2) of the National
Electrical Code, specifically, “tested in
order to determine the marked operating
temperature or temperature range.”
Predator “CII” Fixtures
Class II, Division 1 & 2
Groups E, F, G
Class III, Division 1 & 2
Hazardous Locations
The Predator luminaire has been
designed and tested in accordance with
UL Standard 844 to be “dust-ignition-
proof” as required for Class II
applications.
The fixture will exclude dust from the
inside of the enclosure and will function
at full rating without developing surface
temperatures high enough to cause
excessive dehydration or gradual
carbonization of any organic dust
deposits that may build up. Maximum
surface temperatures will not exceed
200°C (392°F) Group E and Group F or
165°C (329°F) Group G under normal
conditions of use.
Class III fixtures will exclude fibers or
flyings from the inside of the enclosure
and will function at full rating without
developing surface temperature high
enough to cause excessive dehydration
or gradual carbonization of accumulat-
ed fibers or flyings.
All temperature classifications are for 40°C ambient temperature.
The table below lists the UL tested maximum operating temperatures for lamp type and wattage based
on operation in the specific ambient for which it is approved. Please refer to the Maximum Surface
Temperature Code Table of the NEC (National Electrical Code).
In addition, the Predator Temperature Classification for Class I, Division 2, Hazardous Locations and Class II,
III, Division 1 & 2, Hazardous Locations are also shown
Class I, Division 2 Class II, III, Divisions 1 & 2
Lamp Type Maximum Mounting Lamp Type Maximum Mounting
& Wattage Temp. °C Code Restrictions & Wattage Temp. °C Group Code Restrictions
50W HPS 163 T3B 1 50W HPS 163 E,F,G T4A 2
70W HPS 178 T3A 1 70W HPS 178 E,F,G T3C 2
100W HPS 221 T2C 1 100W HPS 221 E,F,G T3C 2
150W HPS 55V 272 T2A 1 150W HPS 55V 272 E,F,G T3C 3
150W HPS 100V 244 T2B 1 150W HPS 100V 244 E,F T3A 3
250W HPS 323 325* 1 150W HPS 100V 244 E,F,G T3B 4
400W HPS 388 T1 1 175W MH 306 E,F T3 3
175W MH 306 325* 1 175W MH 306 E,F,G T3C 4
250W MH 347 350* 1 100W MV 247 E,F,G T3C 2
400W MH 347 350* 1 175W MV 313 E,F T3 2
100W MV 247 T2B 1
175W MV 313 325* 1
250W MV 383 T1 1
400W MV 383 T1 1
Mounting Restrictions
1 Mounting restricted to lamp vertical, base down, +/- 90°.
2 Mounting restrictions are referenced to lamp vertical, base down, 25° back of vertical to 90° lens down.
3 Mounting restrictions are referenced to lamp vertical, base down, vertical to 90° lens down.
4 Mounting restrictions are referenced to lamp vertical, base down, 90° lens down only.
* UL Standards covering hazardous locations (UL 844) Paragraph 49.10 permits fixtures under Class I, Division 2, which are between 300°C and 450°C to be
marked with 325, 350, 375, 400, 425, 450 to indicate actual maximum temperature. (e.g. Code 325 = 325°C)
Note: Maximum temperatures for lamp type and wattage vary between Class I and Class II & III. Class I is established based upon the maximum temperature
inside or outside the luminaire. Class II and III maximum temperature is based upon external surface temperature.
HOLOPHANE®
|Outdoor Lighting INFRASTRUCTURE
| Predator 59
INFRASTRUCTURE
Product Catalog
Variety of mountings
Junction box Knuckle fitter Yoke with pole
tenon adapter
5. Predator
60
FLOODLIGHTING
Product Features
1
3
2
5
4
6
1 Housing: Low copper (360.1
alloy) die cast aluminum
with polyester powder paint.
2 Mounting: 360° swivel of
mounting yoke around fixture
provides top, bottom, or back
mounting.
3 Reflector: Unique reflector
design eliminates bright streaks,
provides uniform illumination, and
low surface brightness.
4 Tempered glass lens
5 Quick-disconnect removable
door: Includes all electrical
components, including the socket.
Captive stainless steel screws.
Door does not distort when
fastened.
6 Gasket: Hollow core high
temperature silicone gasket.
Specifications
Fixture shall be Holophane catalog number
_________________.
Mechanical Construction: The housing shall be die cast
low copper (360.1 alloy) aluminum finished with a 7-stage
pretreatment and an electrostatically applied 2 - 4 mil coat
of polyester powder paint. The finish shall withstand a
160 inch-pound impact measured with a standard
Gardner Impact Tester. It shall have passed a 1000 hour
salt spray test as specified by ASTM B-117. It shall exhibit
no cracking or loss of adhesion from a 180° bend over a
1/8 inch mandrel diameter per ASTM D522. All external
screws shall be captive and be Type 316 stainless steel.
The yoke shall be either AISI Type 316 stainless steel or
zinc electro-plated and yellow chromate finished cold
rolled steel. The yoke shall be capable of being rotated
360° about the fixture for top, bottom, or back mounting.
The door shall be hinged to provide easy access during
lamping and shall be secured to the fixture while open.
The door assembly shall include mechanical stops to
assure proper compression of the gasket. The yoke
mounted fixture shall have a threaded entry to
accommodate 1/2” NPT conduit or connector. When the
junction box mount fixture is used, a 1” NPT entry shall
be provided.
Water-tightness: No water shall enter the fixture when
exposed to a solid stream of water from 3 GG40 brass
spray nozzles - each supplying 12 gallons per minute at
100 PSI. The nozzles shall be 30 inches apart, centered
on, and 24 inches from the fixture plane. Three tests shall
be conducted for 15 minutes each with the vertical
distance of the fixture at 6, 12, and 16 inches above the
nozzles. The gasket shall be hollow core, Durometer 60
silicone, and have a 200°C continuous service temperature.
It shall have demonstrated no visible deterioration after
artificial aging for 96 hours in oxygen at a pressure of 300
pounds per square inch at a temperature of 156° F.
Dust-tightness: An enclosure of a fixture for Class II
locations shall be exposed for at least six heating and
cooling cycles and for at least 30 hours to a circulating
dust-air atmosphere to determine that the fixture is dust-
ignition-proof with regard to exclusion of dust. There
shall be no entrance of the dust into the device as deter-
mined by visual examination following the chamber test
described. The fixture is to be installed in a test chamber to
permit free circulation of the dust-air mixture around the
fixture. The test chamber is to be provided with a cover
and with dust-air-inlet and -outlet connections. The fix-
ture is to be exposed to the dust-air atmosphere that is to
be produced by auxiliary apparatus and introduced into
the test chamber. The tests are to be conducted at an
ambient temperature of 10-40°C (50-104°F) and a relative
humidity of 40-60 percent. Grain dust consisting of
wheat or com dust, or both, that has passed through a
U.S.A. Standard 150-micron (100-mesh) wire cloth is to
be used for the dust-air atmosphere if the fixture is for
Class II, Group F, Group G, or Groups F and G locations.
Magnesium dust, all of which has passed through a
U.S.A. Standard 250-micron (60 mesh) wire cloth, 66% of
which has passed through a 150-micron (100-mesh) wire
cloth, and 22 percent of which has passed through a
75-micron (200-mesh) wire cloth, is to be used for the
dust-air atmosphere if the fixture is for Class II, Group E,
Groups E and F, Groups E and G, or Groups E, F, and G
locations.
Quick Disconnect Electrical: The fixture door shall
contain all ballast components, including the socket, and
be designed for fast removal as a complete assembly
without disturbing aiming. The fixture shall be capable of
being changed to a different wattage, voltage, or lamp
source by simple change out of the unitized electrical
assembly. Replacement shall take less than 60 seconds.
Optical and Socket Assembly: The reflector shall
consist of high purity alloy #3002 aluminum of minimum
0.08 thick sheet. Lens shall be 4.5 mm minimum
thickness tempered glass. The beam efficiency shall be no
less than ___*___. The total efficiency shall be no less
than ____*___. Lamp holders shall be porcelain with
high temperature 16 ga. wiring. Sockets shall be pulse
rated. The screw shell shall be nickel-plated brass with
anti-vibration grips.
Ballast: Shall be copper wound, high power factor, Lead
or Low Loss Lead as specified. Ballasts shall reliably start
and operate the lamp in ambient temperatures to minus
40° F. The lamp extinguishing voltage shall be as low as
39% of nominal. Ballast shall provide 100% wattage to
the lamp and have a published Ballast Factor of 1.0 per
ANSI C82.2. The fixture shall be UL listed for 40° C.
When operated at 10° C below rated ambient temperature,
ballast insulation and capacitor life shall be extended
100%. The low loss ballast available for 250 – 400 watt
lamps, if specified, shall have a core of grain oriented M-6
steel to reduce ballast losses 10 to 20 watts per fixture. A
protected started for High Pressure Sodium lamps, if
specified, shall sense an inoperative lamp and automatically
shut down to prevent continuous pulsing and thermal
damage to itself and ballast secondary windings.
Listing: The fixture shall be UL/CUL 1598 listed for 40° C
ambient “Suitable for Wet Location.” It shall be UL 844
listed for Class I, Division 2; Class II, Division 1 & 2; Class
III, Division 1 & 2. It shall be UL 1598A listed for Marine
Outside.
Warranty: The electrical assembly shall be fully
warranted for a period of 6 years and the housing for
a period of 2 years from the date of manufacture.
6. HOLOPHANE®
|Outdoor Lighting INFRASTRUCTURE
| Predator 61
INFRASTRUCTURE
Product Catalog
STEP 1: LUMINAIRE
Catalog Number Information
PD Small Predator
PF Medium Predator
PD
050HP1 50W HPS
070HP 70W HPS
100HP 100W HPS
15AHP 150W HPS, 55V
175MH 175W MH and MV
PF
250HP 250W HPS
25LHP2 250W HPS
400HP 400W HPS
40LHP2 400W HPS
250MH 250W MH
25LMH2 250W MH
40LMH2 400W MH
250MV3 250W MV
400MV3 400W MV
1 120V only
2 Energy saving ballast
3 Not available with “MT” or “VT”
12 120V
20 208V
24 240V
27 277V
34 347V
48 480V
MT1 Multi-voltage
VT2 Vari-tap
1 120, 208, 240 or 277V
2 120, 277 or 347V for “PF”; only available with
250HP, 250MH and 40LMH
PD
H Class I, Marine Outside
J Class I, Div 2; Class II, Div I;
Class III, Div I and
Marine Outside
K 40°C Wet location
L Marine Outside
PF
B Class I and Marine Outside
K Wet location
L Marine Outside
N Narrow Vertical,
Wide Horizontal Beam
W Wide Vertical, Wide
Horizontal Beam
S Spot Distribution
11 2” Knuckle Fitter
22 Box Mount
3 Stainless Steel Yoke
41 Zinc Plated Yoke
1 Available with UL “K” only
2 “K” and “L” only
A Gray Top Visor
C Bronze Top Visor
D1 Gray Side Shields
E1 Bronze Side Shields
F Black Top Visor
H White Visor
J White Side Shields
L Black Side Shields
PS Protected Starter for HPS
TB Terminal Block
(Ships separately)
F12 Single Fuse Assembly for 120,
240, 277 or 347V, Available UL
“K” only
F22 Double Fuse Assembly for 208,
240 or 480V, Available UL “K”
only
LAMP Lamp
PDWG Wire Guard for “PD” Unit
PFWG3 Wire Guard for “PF” Unit
PDPR Photocontrol Kit for 208, 240,
277V
PDPR12 Photocontrol Kit for 120V
PDPR34 Photocontrol Kit for 347V
08657-XX 2” Tenon Pole Adapter for use
with Yoke Mount
1 Available with UL “K” only
2 Contact TSG for “MT”
3 NA with visor options
STEP 6: MOUNTING
STEP 5: OPTICAL
STEP 2: SOURCE AND WATTAGE
STEP 4: UL LISTING
STEP 3: VOLTAGE
454mm
(17.875")
333.4mm
(13.125")
200mm
(7.875")
STEP 7: COLOR
STEP 8: OPTIONS
STEP 9: ACCESSORIESPD
Effective Projected Area (In ft2)
Tilt above Nadir EPA
15° 1.14
45° 1.66
90° 1.93
135° 1.70
180° 1.14
730mm
(28.75")
416mm
(16.3")
297mm
(11")PF
Effective Projected Area (In ft2)
Tilt above Nadir EPA
15° 1.86
45° 2.66
90° 2.87
135° 2.45
180° 1.61
G Gray
B Bronze
K1 Black for “PF”
W1 White for “PF”
1 Available with UL “K” only
Distributions
House Side
Street Side5
2.5
1.5
1
0.5
0.25
House Side
Street Side5
2.5
1.5
1
0.5
0.25
Mounting heights are 15’
Type I, short, cutoff Type V, cutoff
Ordering Information
How to Construct a Catalog Number
Example: PD
1
LUMINAIRE
PD
PF
100HP
2
WATTAGE
050HP
070HP
100HP
15AHP
175MH
250HP
250LHP
250MH
25LMH
400HP
40LHP
400MH
40LMH
400MV
12
3
VOLTAGE
12
20
24
34
401
48
MT
VT
J
4
UL LISTING
B
H
J
K
L
N
5
OPTICS
N
W
S
2
6
MOUNTING
1
2
3
4
5
G
7
COLOR
B
G
K
W
A
8
OPTIONS
A
C
D
E
F
H
J
L
PS
TB
F1
9
ACCESSORIES
F1
F2
LAMP
PDWG
PFWG
PDPR
PDPR12
PDPR34
08657-XX
1
2
3,4