Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Fireflexmaster is a high performance twin-walled flexible flue liner designed and approved for use with all fuels including gas, oil, and solid fuels. It is manufactured from either 316L or 904L grade stainless steel, with 10 or 20 year warranties respectively. The inner and outer walls are joined by a Triple Lock Joint System for strength and stability. Fireflexmaster comes in diameters from 100mm to 350mm and is supplied in drums or pre-cut packs. It is approved to European Standard EN1856-2.
This document provides installation instructions for the Contura 35TL wood-burning stove. It includes details on minimum installation distances, supplying combustion air, connecting the stove to a chimney, installing surround panels, and final inspection. The instructions specify installing the stove at least 1 meter from combustible materials and following all local building codes. Proper installation is important for safety and performance.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Flexible Liners installation instructionsSchiedel UK
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
This document discusses replacing oxygen and acetylene cutting equipment on ships with more modern plasma cutting technology. It introduces the Hypertherm PowerMax30 Air plasma cutter, which has a built-in air compressor so no air lines are needed. This makes the equipment more portable and eliminates the costs, safety issues, and logistics of using oxygen and acetylene cylinders. It also presents the MULTIPEARL 200-4 XL inverter as a multi-process welder and the Superfire 2 torch for brazing and heating work.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Fireflexmaster is a high performance twin-walled flexible flue liner designed and approved for use with all fuels including gas, oil, and solid fuels. It is manufactured from either 316L or 904L grade stainless steel, with 10 or 20 year warranties respectively. The inner and outer walls are joined by a Triple Lock Joint System for strength and stability. Fireflexmaster comes in diameters from 100mm to 350mm and is supplied in drums or pre-cut packs. It is approved to European Standard EN1856-2.
This document provides installation instructions for the Contura 35TL wood-burning stove. It includes details on minimum installation distances, supplying combustion air, connecting the stove to a chimney, installing surround panels, and final inspection. The instructions specify installing the stove at least 1 meter from combustible materials and following all local building codes. Proper installation is important for safety and performance.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Flexible Liners installation instructionsSchiedel UK
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
This document discusses replacing oxygen and acetylene cutting equipment on ships with more modern plasma cutting technology. It introduces the Hypertherm PowerMax30 Air plasma cutter, which has a built-in air compressor so no air lines are needed. This makes the equipment more portable and eliminates the costs, safety issues, and logistics of using oxygen and acetylene cylinders. It also presents the MULTIPEARL 200-4 XL inverter as a multi-process welder and the Superfire 2 torch for brazing and heating work.
Airtherm is an HVAC specialist company with over 54 years of combined experience. They offer a range of flue and chimney systems including twin wall modular chimneys, single wall modular chimneys, and shared flue systems for multiple boilers. Their products are high quality, meet relevant standards, and come with a 10 year guarantee. They provide experienced installation teams across the UK.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
This document describes a versatile heating cable that is factory terminated and can be used for freeze protection and temperature maintenance even in corrosive environments. The heating cable has PTFE insulation and outer jacket and can operate at temperatures up to 260°C. It is highly flexible, resistant to chemicals and steam, and easy to install on complex shapes. Applications include heat tracing on tanks, vessels, filters, satellite dishes, and more.
Prima Plus flue system installation instructionsSchiedel UK
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
The document provides information about the Sirius Stove System from Schiedel, including:
- It is a complete stove and chimney flue system that is exempt from DEFRA regulations, allowing installation in Smoke Control Areas.
- It offers an all-in-one package for installing a stove and chimney in new or existing homes.
- The Sirius models meet the highest emissions and efficiency standards and are certified at the highest clearSkies level.
Service Center Solahart Pemanas Air Solar Water Heater Tenaga Matahari Solahart ahli
Dalam rangka untuk memastikan layanan terbaik dan saran, Solahart pemanas air tenaga surya dan sistem tenaga surya hanya tersedia melalui Expert Solahart lokal Anda. Dan dengan cakupan seluruh Australia ada satu tidak jauh dari Anda. Cari ahli terdekat Anda di sini.
Semua ahli kami dilatih dan memenuhi syarat untuk menilai rumah Anda atau bisnis dan penggunaan energi Anda. Konsultasi surya GRATIS kami menjamin Anda mendapatkan solusi terbaik mutlak surya untuk situasi Anda. Buku gratis di rumah surya kutipan di sini.
Tidak hanya installer sistem tenaga surya kita diakreditasi oleh Dewan Energi Bersih, mereka juga dilatih oleh Solahart untuk memastikan bahwa setiap instalasi dilakukan sesuai dengan standar instalasi kami yang ketat dan hanya komponen yang ditentukan oleh Solahart digunakan untuk memastikan kinerja dan keamanan sistem tenaga surya Solahart Anda.
This document provides product information on the Predator floodlight by Holophane, including:
- It offers versatility, efficiency, and performance for a variety of lighting needs.
- It can generate wide, narrow, and spot distributions and withstand harsh environments, allowing use in diverse applications.
- Flexibility is maximized with its 360° swivel mounting yoke and quick disconnect removable door for easy maintenance.
Service and Technologies for Process IndustriesJohn Crane
Our world-class rotating equipment technologies, paired with an unmatched breadth of applied engineering expertise, helps plants reduce maintenance costs, slash down time and improve reliability. When it comes to keeping your rotational equipment running 24/7, John Crane’s comprehensive range of products has you covered.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Prima Smooth flue system installation instructionsSchiedel UK
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Short guide to explain the CE Marked Chimney systems under the EN-1856-1 and 2
important information to be able to look into the performance of a system chimney
The document discusses the history and development of Saffire brand welding and cutting equipment over 50 years. It began in 1956 with the introduction of the first Saffire nozzle mix gas welding and cutting system, which fundamentally improved safety. Since then, Saffire has grown to become a market leader focused on continual safety improvements. The document provides details on Saffire's current product range, including regulators, flowmeters, and other accessories for oxy-fuel welding and cutting as well as gas shielding.
This document discusses various methods for applying foam to storage tanks for fire protection, including fixed surface systems, seal area protection, and subsurface foam injection. It provides design guidelines for each method, such as minimum application rates and durations. It also describes Williams' foam chambers and foam makers that can be used for fixed surface application through discharge outlets. The foam chambers are available in custom sizes and flows, and can accommodate dual agents. Supplementary application in diked areas is also addressed.
CALCAST is a high-performance technical ceramic made from calcium silicate that is used in non-ferrous metal casting and high-temperature industrial applications. It has densities ranging from 53 to 69 lb/ft3, and properties including high strength, dimensional stability, thermal shock resistance, and insulation. CALCAST is non-wetting, machinable, and can be used continuously up to 1832°F. It is commonly used in applications like metal furnace linings, die casting units, and ingot casting where its properties help control metal flow and improve thermal balance.
The document discusses Pelican Systems Econogrid, a suspended ceiling system. Some key points:
- Econogrid is designed to meet requirements for modern complex buildings and can be used in offices, retail stores, hospitals, schools and more.
- It has corrosion-resistant galvanized steel, locking coupling mechanisms, mid-span deflection control, and fire safety features in the main tees.
- The system includes main tees, cross tees, wall angles and other accessories to create suspended ceilings. Instructions are provided on installing and calculating materials for 1200x600 and 600x600 layouts.
This document discusses low voltage zero halogen cable joints that provide limited fire hazard. It offers:
1) A comprehensive range of heat shrink joints for single and multicore low smoke fume zero halogen cables that have been fire tested and compliant with London Underground standards.
2) Joints that incorporate flame retardant, non-halogen heat shrink tubing and a flexible outer fire barrier tube to provide a high degree of fire resistance.
3) Easy to use joints that are slim in profile and can be installed horizontally or vertically with an unlimited shelf life. Part numbers and cable ranges supported are provided.
SPX Flow, under the Pneumatic Products brand, manufactures single and twin tower desiccant dryers designed to remove water vapor from natural gas. The skid mounted units also include particulate and coalescing filters that capture solid contaminants to a submicron level.
The document provides installation instructions for a Schiedel Isokern Garden Fireplace model 1200. It consists of 6 steps: 1) constructing the firechest base, sides and back; 2) adding the gather unit; 3) adding chimney blocks and capping; 4) rendering the surface; 5) installing firebricks; and 6) adding an optional log retainer. It also includes diagrams of the fireplace components and exploded views of assembly.
ICS 5000 commercial flue system instructionsSchiedel UK
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Airtherm is an HVAC specialist company with over 54 years of combined experience. They offer a range of flue and chimney systems including twin wall modular chimneys, single wall modular chimneys, and shared flue systems for multiple boilers. Their products are high quality, meet relevant standards, and come with a 10 year guarantee. They provide experienced installation teams across the UK.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
This document describes a versatile heating cable that is factory terminated and can be used for freeze protection and temperature maintenance even in corrosive environments. The heating cable has PTFE insulation and outer jacket and can operate at temperatures up to 260°C. It is highly flexible, resistant to chemicals and steam, and easy to install on complex shapes. Applications include heat tracing on tanks, vessels, filters, satellite dishes, and more.
Prima Plus flue system installation instructionsSchiedel UK
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
The document provides information about the Sirius Stove System from Schiedel, including:
- It is a complete stove and chimney flue system that is exempt from DEFRA regulations, allowing installation in Smoke Control Areas.
- It offers an all-in-one package for installing a stove and chimney in new or existing homes.
- The Sirius models meet the highest emissions and efficiency standards and are certified at the highest clearSkies level.
Service Center Solahart Pemanas Air Solar Water Heater Tenaga Matahari Solahart ahli
Dalam rangka untuk memastikan layanan terbaik dan saran, Solahart pemanas air tenaga surya dan sistem tenaga surya hanya tersedia melalui Expert Solahart lokal Anda. Dan dengan cakupan seluruh Australia ada satu tidak jauh dari Anda. Cari ahli terdekat Anda di sini.
Semua ahli kami dilatih dan memenuhi syarat untuk menilai rumah Anda atau bisnis dan penggunaan energi Anda. Konsultasi surya GRATIS kami menjamin Anda mendapatkan solusi terbaik mutlak surya untuk situasi Anda. Buku gratis di rumah surya kutipan di sini.
Tidak hanya installer sistem tenaga surya kita diakreditasi oleh Dewan Energi Bersih, mereka juga dilatih oleh Solahart untuk memastikan bahwa setiap instalasi dilakukan sesuai dengan standar instalasi kami yang ketat dan hanya komponen yang ditentukan oleh Solahart digunakan untuk memastikan kinerja dan keamanan sistem tenaga surya Solahart Anda.
This document provides product information on the Predator floodlight by Holophane, including:
- It offers versatility, efficiency, and performance for a variety of lighting needs.
- It can generate wide, narrow, and spot distributions and withstand harsh environments, allowing use in diverse applications.
- Flexibility is maximized with its 360° swivel mounting yoke and quick disconnect removable door for easy maintenance.
Service and Technologies for Process IndustriesJohn Crane
Our world-class rotating equipment technologies, paired with an unmatched breadth of applied engineering expertise, helps plants reduce maintenance costs, slash down time and improve reliability. When it comes to keeping your rotational equipment running 24/7, John Crane’s comprehensive range of products has you covered.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Prima Smooth flue system installation instructionsSchiedel UK
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Short guide to explain the CE Marked Chimney systems under the EN-1856-1 and 2
important information to be able to look into the performance of a system chimney
The document discusses the history and development of Saffire brand welding and cutting equipment over 50 years. It began in 1956 with the introduction of the first Saffire nozzle mix gas welding and cutting system, which fundamentally improved safety. Since then, Saffire has grown to become a market leader focused on continual safety improvements. The document provides details on Saffire's current product range, including regulators, flowmeters, and other accessories for oxy-fuel welding and cutting as well as gas shielding.
This document discusses various methods for applying foam to storage tanks for fire protection, including fixed surface systems, seal area protection, and subsurface foam injection. It provides design guidelines for each method, such as minimum application rates and durations. It also describes Williams' foam chambers and foam makers that can be used for fixed surface application through discharge outlets. The foam chambers are available in custom sizes and flows, and can accommodate dual agents. Supplementary application in diked areas is also addressed.
CALCAST is a high-performance technical ceramic made from calcium silicate that is used in non-ferrous metal casting and high-temperature industrial applications. It has densities ranging from 53 to 69 lb/ft3, and properties including high strength, dimensional stability, thermal shock resistance, and insulation. CALCAST is non-wetting, machinable, and can be used continuously up to 1832°F. It is commonly used in applications like metal furnace linings, die casting units, and ingot casting where its properties help control metal flow and improve thermal balance.
The document discusses Pelican Systems Econogrid, a suspended ceiling system. Some key points:
- Econogrid is designed to meet requirements for modern complex buildings and can be used in offices, retail stores, hospitals, schools and more.
- It has corrosion-resistant galvanized steel, locking coupling mechanisms, mid-span deflection control, and fire safety features in the main tees.
- The system includes main tees, cross tees, wall angles and other accessories to create suspended ceilings. Instructions are provided on installing and calculating materials for 1200x600 and 600x600 layouts.
This document discusses low voltage zero halogen cable joints that provide limited fire hazard. It offers:
1) A comprehensive range of heat shrink joints for single and multicore low smoke fume zero halogen cables that have been fire tested and compliant with London Underground standards.
2) Joints that incorporate flame retardant, non-halogen heat shrink tubing and a flexible outer fire barrier tube to provide a high degree of fire resistance.
3) Easy to use joints that are slim in profile and can be installed horizontally or vertically with an unlimited shelf life. Part numbers and cable ranges supported are provided.
SPX Flow, under the Pneumatic Products brand, manufactures single and twin tower desiccant dryers designed to remove water vapor from natural gas. The skid mounted units also include particulate and coalescing filters that capture solid contaminants to a submicron level.
The document provides installation instructions for a Schiedel Isokern Garden Fireplace model 1200. It consists of 6 steps: 1) constructing the firechest base, sides and back; 2) adding the gather unit; 3) adding chimney blocks and capping; 4) rendering the surface; 5) installing firebricks; and 6) adding an optional log retainer. It also includes diagrams of the fireplace components and exploded views of assembly.
ICS 5000 commercial flue system instructionsSchiedel UK
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
ICID flue system installation instructionsSchiedel UK
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
This document provides information about the Schiedel UK Plus flue system, including an overview of the system, product descriptions, installation instructions, and diagrams of system components. The UK Plus is described as a modular, high-quality stainless steel concentric flue system for balanced flue applications. It can be used for gas and oil appliances with continuous operating temperatures up to 200°C. The document outlines the system's properties, application areas, standards compliance, and provides guidance on installation requirements and considerations. Various system components such as pipes, bends, connectors, and accessories are depicted with specifications.
Isokern Celsius stove system installation instructionsSchiedel UK
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Instructions for installation and operation Sargas 1 and Sargas 3Schiedel UK
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Celsius volcanic pumice frame stove operating manualSchiedel UK
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
ICS flue system installation instructionsSchiedel UK
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Earth Day How has technology changed our life?
Thinkers/Inquiry • How has our ability to think and inquire helped to advance technology?
Vocabulary • Nature Deficit Disorder~ A condition that some people maintain is a spreading affliction especially affecting youth but also their adult counterparts, characterized by an excessive lack of familiarity with the outdoors and the natural world. • Precautionary Principle~ The approach whereby any possible risk associated with the introduction of a new technology is largely avoided, until a full understanding of its impact on health, environment and other areas is available.
What is technology? • Brainstorm a list of technology that you use everyday that your parents or grandparents did not have. • Compare your list with a partner.
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...Joshua Orris
The incorporation of a 3DCSM and completion of HRSC provided a tool for enhanced, data-driven, decisions to support a change in remediation closure strategies. Currently, an approved pilot study has been obtained to shut-down the remediation systems (ISCO, P&T) and conduct a hydraulic study under non-pumping conditions. A separate micro-biological bench scale treatability study was competed that yielded positive results for an emerging innovative technology. As a result, a field pilot study has commenced with results expected in nine-twelve months. With the results of the hydraulic study, field pilot studies and an updated risk assessment leading site monitoring optimization cost lifecycle savings upwards of $15MM towards an alternatively evolved best available technology remediation closure strategy.
Download the Latest OSHA 10 Answers PDF : oyetrade.comNarendra Jayas
Latest OSHA 10 Test Question and Answers PDF for Construction and General Industry Exam.
Download the full set of 390 MCQ type question and answers - https://www.oyetrade.com/OSHA-10-Answers-2021.php
To Help OSHA 10 trainees to pass their pre-test and post-test we have prepared set of 390 question and answers called OSHA 10 Answers in downloadable PDF format. The OSHA 10 Answers question bank is prepared by our in-house highly experienced safety professionals and trainers. The OSHA 10 Answers document consists of 390 MCQ type question and answers updated for year 2024 exams.
The modification of an existing product or the formulation of a new product to fill a newly identified market niche or customer need are both examples of product development. This study generally developed and conducted the formulation of aramang baked products enriched with malunggay conducted by the researchers. Specifically, it answered the acceptability level in terms of taste, texture, flavor, odor, and color also the overall acceptability of enriched aramang baked products. The study used the frequency distribution for evaluators to determine the acceptability of enriched aramang baked products enriched with malunggay. As per sensory evaluation conducted by the researchers, it was proven that aramang baked products enriched with malunggay was acceptable in terms of Odor, Taste, Flavor, Color, and Texture. Based on the results of sensory evaluation of enriched aramang baked products proven that three (3) treatments were all highly acceptable in terms of variable Odor, Taste, Flavor, Color and Textures conducted by the researchers.
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...Joshua Orris
Results of geophysics and pneumatic injection pilot tests during 2003 – 2007 yielded significant positive results for injection delivery design and contaminant mass treatment, resulting in permanent shut-down of an existing groundwater Pump & Treat system.
Accessible source areas were subsequently removed (2011) by soil excavation and treated with the placement of Emulsified Vegetable Oil EVO and zero-valent iron ZVI to accelerate treatment of impacted groundwater in overburden and weathered fractured bedrock. Post pilot test and post remediation groundwater monitoring has included analyses of CVOCs, organic fatty acids, dissolved gases and QuantArray® -Chlor to quantify key microorganisms (e.g., Dehalococcoides, Dehalobacter, etc.) and functional genes (e.g., vinyl chloride reductase, methane monooxygenase, etc.) to assess potential for reductive dechlorination and aerobic cometabolism of CVOCs.
In 2022, the first commercial application of MetaArray™ was performed at the site. MetaArray™ utilizes statistical analysis, such as principal component analysis and multivariate analysis to provide evidence that reductive dechlorination is active or even that it is slowing. This creates actionable data allowing users to save money by making important site management decisions earlier.
The results of the MetaArray™ analysis’ support vector machine (SVM) identified groundwater monitoring wells with a 80% confidence that were characterized as either Limited for Reductive Decholorination or had a High Reductive Reduction Dechlorination potential. The results of MetaArray™ will be used to further optimize the site’s post remediation monitoring program for monitored natural attenuation.
REPORT-PRESENTATION BY CHIEF SECRETARY, ANDAMAN NICOBAR ADMINISTRATION IN OA ...
Flex Brochure
1. www.schiedel.com/uk
Flex Liners
& Flue Boxes
For re-lining existing chimneys to take gas, oil and
multi-fuel appliances including stoves and open fires.
SAP 940002170 - May 2022
DON'T FORGET TO REGISTER YOUR INSTALLATIONS
AND START EARNING SCHIEDEL INSTALLER REWARDS
See inside for more details
LIFETIME *
GUARANTEE!
2. 2
Product Description
Flexible flue and chimney liners designed for lining an existing
flue or chimney.
Triplelock Plus is a single wall stainless steel flexible flue liner
designed for atmospheric gas and kerosene appliances where
the flue gas temperature does not exceed 260°C. Diameter
range Triplelock Plus 100 - 200mm.
The Prima Smooth range is manufactured under the strict requirements of BS EN ISO 9001 Quality management scheme.
Prima Smooth has corrosion certification from TÜV. Prima Smooth is listed by HETAS as a product suitable for solid fuel.
TecnoFlex Plus is a twin skin flexible chimney liner designed for
gas, oil and multi-fuel, where the maximum flue gas temperature
does not exceed 600°C. Diameter range 80 - 300mm.
High Temperature
Applications
Low Temperature
Applications
T600 N1 W V2 L50012 G
T600 N1 W V2 L70012 G
T200 P1 W V2 L50012 O
T200 P1 W V2 L70012 O
Applications
T300 N1 W V2 L50010 O
Approvals
Application
TecnoFlex Plus is CE Certified to
BS EN1856-2 TÜV 0036 CPR 9195 035 with designations:
Triplelock Plus is CE Certified to
BS EN1856-2 TÜV 0036 CPR 9195 043
with designations:
Made from corrosion-resistant 316L stainless steel.
Leak resistant construction due to dovetail folded seam
(Triplelock).
Highest corrosion resistance.
Deep corrugations for high crush resistance and better
flexibility when installing.
Strong seam construction resists the rigours of pulling the
liner into place during construction.
SINGLE WALL LINERS
Unique joint design giving exceptional strength to the lock.
Both inner and outer layers made from corrosion-resistant
316L stainless steel. 904L stainless steel is also available as an
option.
Corrugated outer skin for high crush resistance.
Extra smooth inner skin allows for easy drain down of
condensates, less opportunity for soot to collect in the joint
area and ease of sweeping.
Inner skin remains smooth and protective even after the
rigours of installation.
TWIN WALL LINER TECNOFLEX PLUS
TRIPLELOCK PLUS
Dovetail folded
Triplelock seam
Direction of
flue gas flow
3. 3
Packaging Options
TECNOFLEX PLUS IS AVAILABLE IN 3 PACKAGING OPTIONS:
TecnoFlex Plus 316L Option 1a – Shrink Wrap Packs
Code Description Internal Ø mm
Order Ref Pack Length 80 100 125 155 180 200
SAP Code
5m Pack - 124511 125034 126418 126549 127128
6m Pack 130493 124516 125040 126420 126550 127129
7m Pack - 124520 125045 126421 126551 127130
8m Pack 130497 124524 125049 126422 126552 127131
9m Pack 130498 124647 125054 126423 126553 127132
10m Pack 130457 124633 125002 126396 126530 127112
11m Pack - - 125006 126397 126531 127113
12m Pack - 124490 125010 126398 126532 127114
30m Pack 130467 124507 125028 126413 126545 127126
40m Pack - 124509 125030 126415 - -
TecnoFlex Plus 904L Option 1b – Shrink Wrap Packs
Code Description
Order Ref Pack Length 125 155 180 200
SAP Code
5m Pack 125446 126469 127059 127666
6m Pack 125447 126472 127060 127667
7m Pack 125448 126474 127061 127668
8m Pack 125450 126476 127062 127669
9m Pack 125451 126478 127063 127670
10m Pack 125434 126449 127049 127654
11m Pack 125435 126451 127050 127655
12m Pack 125436 126453 127051 127656
30m Pack 125442 126464 127058 127665
40m Pack 125443 126465 - -
TecnoFlex Plus 316L Option 2a – Unwinder Cartons
Carton Dims. (m)
Length x Width x Height
Order Ref
Internal Ø mm
100 125 155
1.2(l) x 1.2(w) x 1(h)
Length (m) 50 40 -
SAP Code 124917 125420 -
1.2(l) x 1.2(w) x 1.2(h)
Length (m) 50 50 30
SAP Code 124917 125421 126439
TecnoFlex Plus 904L Option 2b – Unwinder Cartons
Carton Dims. (m) Length x Width x Height Internal Ø mm 155
1.2(l) x 1.2(w) x 1.2(h) Length (m) 30 SAP Code 126438
TecnoFlex Plus 316L Option 3a – Unwinder Boats
Carton Dims. (m)
Length x Width x Height
Order Ref
Description Internal Ø mm
Coil Length 100 125 155 180 200
2.1(l) x 1.28(w) x 2.2(h) SAP Code
80 m Coil 137763 137272 - - -
60m Coil - - 126419 - -
40m Coil - - - 133999 -
30m Coil - - - - 133294
TecnoFlex Plus 904L Option 3b – Unwinder Boats
Carton Dims. (m)
Length x Width x Height
Order Ref
Description Internal Ø mm
Coil Length 100 125 155 180 200
2.1(l) x 1.28(w) x 2.2(h) SAP Code
80 m Coil - 125449 - - -
60m Coil - - 126471 - -
40m Coil - - - 154658 -
30m Coil - - - - 154659
4. 4
Flue Sizing
This information and sizes are provided as a nominal guide only.
Flue sizing for appliances, particularly commercial/industrial
applications will vary depending on siting details and appliance
manufacturer’s instructions and design criteria. These will
override the sizing guide below and reference must be made to
appliance manufacturer.
Notes:
1. Subject to appliance manufacturer’s testing criteria.
2. Subject to manufacturer’s input rating and chimney height.
3. Subject to manufacturer’s output rating and chimney height.
4. Min 300mm depending on opening, chimney size and height.
5. Smokeless fuel only.
6. Smokeless fuel or coal.
Notes:
1. Subject to appliance manufacturer’s testing criteria.
2. Subject to manufacturer’s input rating and chimney height.
3. Subject to manufacturer’s output rating and chimney height.
4. Min 300mm depending on opening, chimney size and height.
5. Smokeless fuel only.
6. Smokeless fuel or coal.
TRIPLELOCK PLUS TECNOFLEX PLUS
Flue Size Selection Guide
100 mm 125 mm 150 mm 180-200mm
Gas
- Atmospheric Boiler
Input up to 25kW
Input 25kW to 40kW
Input 40kW to 60kW
Gas
- Commercial/
Industrial Boiler
Input up to 50kW to 70kW
Gas Fires
‘Radiant’ to BS7977-1 2002
‘Inset’ to BS7977-1 2002
‘Backboiler’ to BS7977-2 2003
Gas Water Heaters
Input up to 25kW
Input 25kW to 55kW
Input 55kW to 60kW
Input over 60kW
Gas Warm Air Units
Input up to 18kW
Input 18kW to 35kW
Input 35kW to 60kW
Input over 60kW
Gas Stove Cooker
Kerosene (28 sec Class C2)
Heating Boiler
Output up to 25kW
Input 25kW to 45kW
Input 45kW to 70kW
Kerosene Stove/Cooker
Kerosene Water Heater
Input up to 41kW
Kerosene Visual
Effect Stove
Output up to 17kW
Flue Size Selection Guide
80-
100
mm
130
mm
150
mm
180
mm
200
mm
230
mm
250-
300
mm
Gas Boiler
- Forced Draught
Input up to 25kW
Input 25kW to 45kW
Input 45kW to 50kW
Input 50kW to 75kW
Input 75kW to 100kW
Input over 100kW
Gas Fires
‘Inset’ to BS7977-1 2002
‘Decorative’ to
BSEN 509:2000
Gas Oil (35 sec Class D)
Heating Boiler
Output up to 25kW
Input 25kW to 45kW
Input 45kW to 70kW
Input 70kW to 100kW
Output over 100kW
Solid Fuel Heating Boiler
Output up to 20kW
Output 20kW to 30kW
Output 30kW to 60kW
Open Fires
(Standard Opening)
500mm x 550mm
‘Avant Garde’ Feature
Open Fires
Room Heaters
Wood burning Stoves/Cookers.
Use only seasoned wood which
has been stored 1/2 years in dry
conditions.
Inglenook or non-standard
opening.
The Cross sectional area of the
chimney liner must be a minimum
of 15% of the total cross sectional
area of the fireplace opening.
2
2
3
4
3
3
S
S
S
SC
SC
SC
200
min
180
min
230
min
SC
SC SC
1
2
2
2
3
3
2
3
3
2
3
1 1
5. 5
Building Regulations Document J requires that a flexible
flue liner can only be installed completely enclosed inside a
masonry chimney. A non masonry enclosure such as timber or
plasterboard boxing in is not acceptable.
The type of flue liner permitted depends on the fuel to be
used, the type of appliance and the type and year of chimney
construction in which it is to be fitted.
MANDATORY REQUIREMENTS ON ACCEPTABLE CHIMNEY, FLEXIBLE LINER
& APPLIANCE COMBINATIONS
For gas burning installations, a flue terminal is required that
complies with section 5 of BS715. Where a proprietary terminal
is not used, the free area of outlet openings on the termination
shall be at least twice the cross sectional area of the flue. Outlet
openings shall be such that they will admit a ball of 6mm
diameter but not of 16mm diameter. The openings shall be
uniformly distributed around the terminal or arranged at two
opposite faces. (BS5440 Part I). An approved terminal should be
used to protect the end of the flue. A gas flue terminal must be
fitted to an all gas installations of 170mm diameter or less.
For oil burning installations, a rain cap or universal terminal may
be used, however, as there is a corrosion risk on such systems,
regular inspection is recommended.
TERMINATION METHODS
RECOMMENDED BY BS7566 PART4
System Design
Building Regulations Document J, outlines different requirements
for relining masonry chimneys built before and after 1st February
1966. This is summarised in the table alongside.
Appliance
Chimneys
built before 1.2.1966
Chimneys
built after 1.2.1966
Gas Burning
Output up to 45kw
Triplelock Plus can be used in unlined
chimney on dry applications.
Triplelock Plus can be used in lined
chimney on dry applications.
Kerosene Burning
Output up to 45kw
Triplelock Plus can be used in unlined
chimney on dry applications.
Triplelock Plus can be used in lined
chimney on dry applications.
Gas/Oil Burning
Output up to 45kw
TecnoFlex Plus can be used in unlined
chimney on wet and dry applications.
TecnoFlex Plus can be used in unlined
chimney on wet and dry applications.
Solid Fuel Burning
Output up to 45kw
TecnoFlex Plus can be used in unlined
chimney.
TecnoFlex Plus can be used
in lined chimney.
Multi-fuel applications, rain caps and universal terminals
are not recommended for use on solid fuels, as the use of
covered terminals will increase flow resistance and encourage
the formation of aggressive condensates and deposits. In
some instances, a terminal incorporating a spark guard may be
demanded to reduce the risk of fire hazard. For all multi-fuel
systems, regular cleaning is essential to prevent the accumulation
of material which could ignite and create a fire hazard.
6. 6
Typical stove installation
Screw fit range
of Terminals
Screw fit range
of Adaptors
Prima Smooth to
TecnoFlex Plus
Prima Plus to
TecnoFlex Plus
Vitreous to
TecnoFlex Plus
TecnoFlex Plus
to Prima Plus
Top Insert
Top Clamp
This item is used in
conjunction with the
Top Plate to secure
the liner at the top
of the stack.
Top Plate
This item is used in
conjunction with the
Top Clamp to support
the liner at the top of
the stack. Can also be used
as a debris plate above the
appliance.
Ventilation Pipes
TecnoFlex Plus Liner
Available in cut lengths
or as packs containing
the Top Clamp and
Top Plate.
Bottom
Support Bracket
To secure TecnoFlex Plus.
Debris Plate
(Top Plate)
Prima Smooth
or Prima Plus
Terminal
Pot Hanger
Combined
Pot Hanger
& Terminal
VISIT OUR YOUTUBE CHANNEL
FOR AN INSTALLATION ANIMATION
7. 7
RE-USE OF A PREVIOUSLY CAPPED OR SHORTENED CHIMNEY
The chimney can be reused providing the existing brickwork is inspected to ensure it is in good condition. The chimney can be
lined with the appropriate liner, ensuring that the liner is used only inside the stack. Connection to flue pipe ICID (multi-fuel) or ICS
(multi-fuel) system can be made to the appliance/ termination, by using the appropriate connector inside the chimney, and suitably
sealed with fire cement. The stack can be extended using ICS or ICID depending on the application.
RE-USE OF A FITTED FLEXIBLE LINER WHEN CHANGING THE APPLIANCE
Provided the diameter and type of flex is suitable for the new appliance to be fitted and the installer has inspected the liner and
is satisfied with its condition the liner can be reused.
However, as the lifespan of the previous appliance and liner may not be known, it is strongly recommended the old flue liner is
removed, the chimney swept, then a suitable new liner installed.
USE OF FLUE LINER ON CONDENSING APPLIANCES
TecnoFlex Plus can be used on condensing appliances, which have pressure at the flue outlet of 200Pa maximum. It is necessary to
fit a tee and drain point at the base of the vertical system, adequately supported, and connected to a drainpipe to a suitable drain
point (see Fig. 1).
Fig. 1 TYPICAL CONDENSING APPLIANCE CONNECTION
135° Tee
and Draincap
TecnoFlex Plus Top Plate
used as
Debris Plate
Prima Plus
Connecting
Flue Pipe
Adaptor
Prima Plus to
TecnoFlex Plus
Appliance
Bottom
Support
Bracket
Drain Pipe
(by others)
8. 8
TecnoFlex Plus – Flexible
Twin Wall Liner
TecnoFlex Plus is available in diameters: 80, 100, 125, 155, 180, 200, 230, 250, & 300mm. Packaging options for Ø80-200mm
are shown on p.3. For Ø230-300mm TecnoFlex Plus is available in cut lengths of up to a maximum length of 12m.
Screw Fit Accessories
Ø Flex
Ø Nom
Ø Flex
300
Ø Nom
Ø Flex
76 76
A
Ø Nom
Ø Flex
Ø Nom
Adaptor - Plain End to TecnoFlex Plus 4044
Int Ø mm 98/125 122/125 122/155 146/155 146/180 176/180 176/200 196/200
Ø Flex 125 125 155 155 180 180 200 200
Ø Nom 98 122 122 146 146 171 171 196
SAP Code 110227 110363 110459 110765 110848 111153 111290 111502
Extended Adaptor - Plain
End to TecnoFlex Plus
4049
Int Ø mm 121/125 147/155
Ø Flex 155 155
Ø Nom 125 150
SAP Code 111420 111427
Increaser - Eccentric Plain
End to TecnoFlex Plus
4051
Int Ø mm 125/155
Ø Flex 155
Ø Nom 125
SAP Code 110151
Closure Plate Adaptor Kit (Loose Plate)
Int Ø mm 121/155 147/155
A 300 300
Ø Flex 155 155
Ø Nom 125 150
SAP Code 112090 112091
Adjustable Closure Plate SW to Flex
Int Ø mm 125/125 125/155 150/155
Ø Flex 125 155 155
Ø Nom 125 125 150
SAP 151945 151946 151947
Ø Flex
Ø Nom
Adaptor - Prima Smooth to TecnoFlex Plus PS0E3
Int Ø mm 125/125 125/155 150/155 180/180 200/200
Ø Flex 125 155 155 180 200
Ø Nom 125 125 150 200 200
SAP Code 110176 119949 110411 120028 119947
Closure Plate Adaptor with
test point
Int Ø mm 125 125/155 150/155
Ø Flex 125 155 155
Ø Nom 125 125 150
Ø B 148.3 310 310
SAP 175667 175668 175669
Ø Flex
173
Ø Nom
B
136mm
50mm
Ø Nom
Ø Flex
9. 9
Ø Flex
Ø Nom
Ø Flex
Ø Nom
Flex Ø
Ø Flex
Screw Fit Accessories
Adaptor - TecnoFlex Plus to ICS 25
Int Ø mm 125/130 155/150 180 200
Ø Flex 125 155 180 200
Ø Nom 130 150 180 200
SAP Code 142630 142631 142632 142633
Combined Pot Hanger & Terminal 4050
Int Ø mm 125 155 180 200
SAP Code Terracotta 175444 175446 133826 133827
SAP Code Unpainted - - 133863 133864
SAP Code With Mesh 175441 175443 152864 152865
Terminal 4048
Int Ø mm 125 155 180 200
SAP Code 111292 111583 111957 112183
Adaptor - TecnoFlex Plus to ICID
Int Ø mm 125/125 155/150 180/180 200/200
Ø Flex 125 155 180 200
Ø Nom 125 150 180 200
SAP Code Plain 142587 142595 142589 142590
SAP Code Black 142591 142596 142593 142594
Ø Flex
Ø Flex
Adaptor - Prima Plus to TecnoFlex Plus S0E3
Int Ø mm 80 100 130/125 150/155 180 200 230 250 300
Ø Flex 80 100 125 155 180 200 230 250 300
Ø Nom 80 100 130 150 180 200 230 250 300
SAP Code - - 110053 110189 106899 106900 - 106902 106903
Screw Fit Joiner - TecnoFlex Plus to
TecnoFlex Plus 4038
Int Ø mm 125 155 180
SAP Code 110297 110536 110691
Nosecone 4042
Int Ø mm 80 100 125 155 180
SAP Code - - 109953 109950 110513
Adaptor - TecnoFlex Plus to Prima Plus 4040
Int Ø mm 125/130 155/150 180 200
Ø Flex 125 155 180 200
Ø Nom 130 150 180 200
SAP Code 110052 110188 106912 106913
Ø Flex
Pot Hanger 4047
Int Ø mm 125 155 180 200
SAP Code 111285 112305 111992 112551
10. 10
Gather Unit 4033
Int Ø mm 180 200
SAP Code 126556 127135
Top Clamp 4003
Int Ø mm 80 100 125 155 180 200 230 250 300
SAP Code 106937 106938 125116 126427 106945 106946 106947 106948 106949
This item is used in conjunction with the Top Plate to secure the liner at the top of the stack. Can also be used as an intermediate support.
Top Insert 4003
Int Ø mm 100 125 155 180 200 230 250 300
SAP Code 124692 125120 126430 126563 127140 127734 128154 128662
Top Plate 4002
Int Ø mm 80 100 125 155 180 200 230 250 300
SAP Code 130501 124690 125117 126428 126560 127138 127732 128152 128661
This item is used in conjunction with the Top Clamp to support the liner at the top of the stack. Can also be used as an intermediate support.
Bottom/Intermediate Support Bracket 4009
Int Ø mm 80 100 125 155 180 200 230 250 300
SAP Code 130499 124607 125114 126425 126558 127136 127729 128149 128658
For use where a Tee is fitted to the base of the stack. Can also be used as an intermediate support.
TecnoFlex Plus Accessories
50
300
60
20
140
11. 11
Option 1 - Shrink Wrap Packs (Ø 100-125mm only)
Length (m) 6 7 8 9 10 11 12
Liner & Clamp Plate Ø100*
SAP Code
124513 124518 124522 124526 124631 124635 124488
Liner & Clamp Plate Ø125* 125036 125043 125047 125051 125000 125004 125008
Liner, Clamp Plate & Terminal
Ø125
125035 125042 - 125050 124999 125003 125007
* When ordering these codes, a terminal must be ordered separately where required.
Option 2 - Reels (Ø 100-200mm only)
Hex Type
Description Internal Ø mm
Reel Length 100 125 150 180 200
Triplelock
80m 124546 125182 - - -
50m - - 125883 - -
30m - - - 126610 127183
Triplelock Plus Accessories
TRIPLELOCK PLUS IS AVAILABLE IN 2 PACKAGING OPTIONS:
Triplelock Plus – Flexible
Single Wall Liner
FGC Economy Terminal
Int Ø mm 100 125 150
Old Code 7T26100 7T27125 T28150
SAP Code 130743 130744 130745
Uniterm Type A 7T05125
Int Ø mm 125
SAP Code 125431
This Uniterm assembly is designed to be installed to
a potless chimney. (Typical 9” x 9” stack) Tested and
Certified to BS715: 1993
Uniterm Type B 7T04125
Int Ø mm 125
SAP Code 125431
This Uniterm assembly is designed to be installed to
a potless chimney. (Typical 9” x 9” stack) Tested and
Certified to BS715: 1993
Clamp Plate (2 Piece)
Int Ø mm 100 125 150
Old Code 7T29100 7T30125 7T31150
SAP Code 124693 125121 125817
Clamp and Plate
Int Ø mm 180 200
Old Code 7T32180 7T33200
SAP Code 126566 127143
Debris Plate 0164
Int Ø mm 100 125
SAP Code 124695 125123
This item is used to seal the space between the liner
and the chimney at the base of the stack.
12. 12
Flue Boxes
WHICH FLUE BOX & LINER TO CHOOSE
For existing chimneys the flue box is normally connected to a flexible chimney liner. Schiedel Rite-Vent’s unique new Fast-fix spigot
makes the job much quicker and easier than before. Fast-fix greatly reduces the need for expensive builder’s work and costly
reparation after completion of the installation.
Fast Fix Spigot
FAST FIX WORKS LIKE THIS
Lowering from
top of chimney -
Pull flex into flue
box interior using
nose cone and
string provided -
Remove nose cone.
Push Fast-fix spigot
onto flex –
which will be
secured by the
unique clip fastening
Remove spigot -
Push box straight
back into opening -
Screw flange face
to wall
Push spigot back
into aperture
in box top -
Secure spigot using
bolts provided -
Complete installation
by fitting clamp
plate and terminal.
1 2 3
Type of Fire Specification Specification Flue Type & Size
Radiant
Suitable for radiant and
convector radiant gas appliances
using natural gas or
liquid propane
Standard
Recessed
VRV T/Wall
VRV S/Wall
GF Box
Diameter 125mm Flex
conforming to BS EN1856-2
Diameter 125mm B Vent
conforming to BS EN1856-1
Back Boiler Unit
Combined Appliances:
Gas fires/Back boiler
Back Boiler Box
for Flex
Diameter 125mm Flex
conforming to BS EN1856-2
Diameter 125mm B Vent
conforming to BS EN1856-1
Living Flame Fires
Inset live fuel effect live fires
up to 15kw
ILFE Box
Flex/TecnoFlex Plus
Flex conforming to BS EN1856-2
Diameter as per appliance requirement
13. 13
460
560
610
196
406
165
104
460
560
330
406
100
610
305
437
489
390
A
417
565 642
546
358
to
480
603
356
538
375 290
415
380
100
290
520
400
280
500
500
570
90
280
500
585
380
500
Designed for use with radiant and decorative gas fires
complying to BS 7977-1. Constructed with an aluminium
liner and coated steel outer case.
Designed with the spigot at the rear, for use with larger
radiant and decorative gas fires. for gas fires to BS
7977-1.
For use with Inset Live Fuel Effect gas fires complying to
BS 7977-1, with a heat output not exceeding 7kw.
Standard Flue Box Recessed Flue Box ILFE Flue Box
Adjustable in depth from 358mm - 480mm to
accommodate a wide range of back boilers. Suitable for
fires complying with BS 7977-2.
Universal opening allowing connection to the boiler
with B Vent or Flex.
Single wall design with sloping back to help fit some
openings. For radiant gas fires complying with BS7977-1.
Twin wall construction for reduced condensation.
Otherwise as VRV Single Skin Box.
Suitable for fires complying with BS7977-1. Fits most
popular radiant gas fires including the widely used Valor
Firelite Oxysafe.
Reduced height, extra depth and extra large flanges
minimise builders work on installation.
Large Flue Box for Back Boiler GF Flue Box VRV Twin Wall Flue Box
VRV Single Skin Flue Box
For use with Triplelock
Flue Boxes
SAP Code 125417
Old Code 0182125
SAP Code 125062
Old Code 0165125
SAP Code 125416
Old Code 7T91125
SAP Code 125134
Old Code 0183125
SAP Code 125414
Old Code 7T98125
SAP Code 125189
Old Code 7T95125
SAP Code 125129
Old Code 0188125
A
Flex 122
Tecno 149
14. 14
Installation
MANDATORY REQUIREMENTS
Connection to an appliance which is not connected to the
fuel supply, should be carried out by a competent person. We
recommend the use of HETAS approved installers for solid
fuel applications. However connection to an appliance that is
connected to the fuel supply, must be carried out by a Gas Safe
(Gas) or OFTEC (Oil) registered installer.
PRIOR TO INSTALLATION
In all cases the chimney should be inspected for deterioration
and if necessary any remedial work required should be carried
out. The chimney should be swept, preferably by a member of
NACS (National Association of Chimney Sweeps) or a suitably
qualified chimney sweep who would provide a certificate after
sweeping and checking, which should be retained for future
reference.
The brickwork pointing and the flashings should be checked to
ensure they are in good order and corrected as necessary.
INSTALLATION OF THE LINER
Prior to installation of the Flex, we recommend that a test length
of approx. 1.5m with a nose cone attached to each end, is pulled
through the chimney to ensure that the chimney is suitably sized
and free from obstructions. Failure to do so may lead to the
warranty being invalidated on the Flex if damage has been caused
due to snagging on an obstruction.
The flue liner should be pulled down the chimney using a nose
cone and string/rope. All Triplelock Plus packs are supplied with
a nose cone. In the case of TecnoFlex Plus, a screw fit nose cone
can be purchased and connected to the end of the TecnoFlex
Plus by screwing the cone onto the outside of the TecnoFlex Plus.
LINER ORIENTATION
It is essential in the case of twin wall TecnoFlex Plus that the
liner is installed the right way up and the liner should not come
into contact with the chimney. The arrow on the outside of the
liner indicates the direction of flue gas flow and must be pointing
upwards towards termination. Triplelock flex can be installed
either way up.
BENDING OF THE LINER
Great care should be taken to avoid over-bending or kinking the
liner on installation. The minimum bending radii are shown in the
table below.
INSULATION
Where the chimney is highly exposed or in a large void, then
insulation should be considered. If insulation is required, granules
such as Vermiculite, should be poured in around the liner from
the top of the stack after fitting a suitable debris plate at the
bottom of the system. Alternatively a solid tube of high quality
insulation can be used.
VENTILATION
Where TecnoFlex Plus is used serving a solid fuel appliance,
ventilation between the liner and the inside of the chimney will
be required. This is provided by installing two 15mm pipes into
the masonry at the top of the stack just below the top plate and
clamp, at an angle to prevent the ingress of rainwater. lt would
also be necessary to install a vent at the base of the stack above
the debris plate or the gather unit. This should be an air brick or
vent of 20cm. If the cavity is to be insulated with pearlite, or tube
wrap insulation, then two 15mm pipes at the top of the stack to
allow any moisture in the insulation to evaporate freely, must still
be provided.
SUPPORT OF THE LINER
Triplelock Plus, which is used exclusively on gas and oil applications,
is relatively light and can be supported at the top of the chimney
using a clamp plate fixed to the top of the masonry stack.
TecnoFlex Plus, however, is heavier and support may be needed
at both top and bottom of the stack. At the top of the stack there
are two alternatives:
1. Plate and clamp fixed directly to the existing masonry stack.
2. Pot Hanger/ Combined Pot Hanger & Terminal supporting the
weight of the flex using the existing chimney pot. At the base of
the stack a bottom support bracket should be used if the total
length of liner is >15m.
CUTTING THE LINER TO THE CORRECT LENGTH FOR
THE CHIMNEY
After the length of flue liner has been connected to the appliance,
allow a sufficient length of liner to protrude above the clamp
plate to secure the terminal and then cut, using suitable cutting
equipment. At all times extreme care must be taken when cutting
the liner and strong industrial gloves plus long sleeved overalls
should be worn as cut edges are very sharp. In addition, any tape
secured to the ends of the liner, which is provided for safe handling
prior to installation, must be removed before completion and
commissioning of the full system.
CONNECTION OF THE TERMINAL TO THE FLUE LINER
For Triplelock Plus systems, the terminal should be fitted over
the protruding 75mm of liner and rivetted or secured using self
tapping screws.
For TecnoFlex Plus systems, please refer to the installation
instructions for the various options.
Minimum Bending Radius
Product 80 100 125 155 180 200 230 250 300
Triplelock
Plus
- 250 310 375 450 500 - - -
TecnoFlex
Plus
240 300 375 465 540 600 690 750 900
15. 15
Typical Triplelock Installation
Triplelock Plus Liner
Debris Plate
GF Box For Radiant
Fires to BS7977-1 2002
Suitable hearth complying
with Building Regulations
JOINING OF FLEXIBLE FLUE LINER
Flexible flue liners should be installed in continuous lengths
without joiners. Schiedel Rite-Vent can supply all flue liners
in specific lengths on drums or in pack form upon request. On
TecnoFlex Plus installations, joiners are only permitted where
the chimney liner length exceeds the maximum length available
and details of the installation are agreed in advance, in writing,
in compliance with product warranty conditions.
CONNECTION TO THE APPLIANCE OR FLUE BOX
The connection to the appliance should be made using fire
cement/rope or high temperature sealant to ensure a positive
seal. Where TecnoFlex Plus is to be fitted to the top of an open
fire place, a Schiedel Rite-Vent gather unit should be fitted into
the throat of the chimney connected to the TecnoFlex Plus and
sealed off.
When connecting to a Schiedel Rite-Vent flue box, the flexible
liner simply pushes directly on to the fast fix spigot. No sealant
is required.
When making a connection to a flue pipe in another product type,
such as rigid stainless steel single or double wall or vitreous enamel,
then the appropriate connector to/from flexible should be used. The
connector should be suitably sealed to the appliance spigot ensuring
a gas tight joint.
THE SCHIEDEL INSTALLATION APP
This handy mobile guide can be used on mobile devices and touchscreen tablets.
It offers a number of very useful guides on all aspects of installing an appliance using
Schiedel Chimney Systems, including:
• Quick and straightforward reference for installers.
• Video breakdowns of each stage of the installation process, from connection to
the appliance through to termination.
• Highlighting the safety critical areas where the chimney penetrates the floors,
ceilings, roof and walls.
• Incorporates frequently asked questions information at each stage of the
installation process, in line with building regulations.
• An easy-to-use system for downloading full product information and installation
instructions.
• Register your Guarantee in the App.
Download the iPhone and iPad version in the App Store and Android version in the
Google Play Store.
16. 16
After Installation
TESTING BEFORE USE
This is done by means of a flue flow test as described in BS15287
Parts 1 & 2 (open appliances & room sealed appliances). This
can be summarised as follows:- After a visual and physical check
of the joints in the system, and ensuring an adequate air supply
for combustion has been provided, close all doors and windows
in the room in which the appliance is to be installed. It will be
necessary to introduce heat to the flue system for a minimum
of 10 mins and possibly up to 30 mins using a blow torch or
similar. Position a smoke pellet (providing a performance of 5m3
of smoke in 30 secs burn time) at the intended position of the
appliance. The test is satisfactory if there is no significant spillage
from the appliance position, no seepage over the length of the
system, and discharge only from the terminal. If these conditions
are not met, the test has failed and all faults must be rectified
before connection of the appliance to the fuel supply.
LIFE EXPECTANCY AND WARRANTIES
We are confident in our products and so offer you (the owner)
a generous guarantee in relation to the flexible liner system (the
System). Provided that you comply with the conditions stated
below, we guarantee to you that the System will be free from
defects for whichever is the greater of:
• a period equal to the guarantee period of the appliance to
which the Liner is first connected; or
• 20 years.
For recommended fuels listings, please refer to the HETAS
Guide www.hetas.co.uk
In the event of a fault developing in the product due to defective
materials or faulty manufacture Schiedel Chimney Systems
undertake to replace the product only. Schiedel Chimney
Systems cannot accept liability nor take any responsibility for
the installation, building or redecorating costs or any other
consequential losses arising. If any complaint is found to be
a result of faulty installation, non-compliance with or abuse
contrary to these conditions, the cost of site investigation is
chargeable.
The conditions of the guarantee are:
• Correctly sized and installed in accordance with the
manufacturer’s instructions, current Building Regulations and
relevant British and European standards.
• Maintained correctly by a qualified and competent person
and maintenance records kept updated for both appliance and
chimney/chimney liner.
• Used in combination with an appliance burning only approved
fuels in accordance with Schiedel Chimney Systems and the
appliance manufacturer’s instructions.
• Register your product within 30 days of installation at
WWW.SCHIEDEL.COM/UK and provide us with any
evidence we reasonably request to prove that your System has
been fitted by a HETAS approved installer or if not, has been
signed off by a Building Control Inspector prior to use.
• Familiarise yourself with the User Guide and comply with its
provisions in full during the lifetime of your usage of the Liner
(including by keeping the required records safe). Failure to do
so will invalidate any guarantee claim.
For more details about the guarantee visit our website.
USE AFTER A CHIMNEY FIRE
Whilst TecnoFlex Plus is designed and tested to withstand
chimney fire conditions the flue liner could be damaged under
the conditions of a chimney fire, and must always be inspected
by a suitably qualified individual (e.g. member of the NACS) and
replaced as necessary, before using the appliance or fire again.
1st with a
LIFETIME
GUARANTEE
Schiedel Installer Rewards
Exciting news from Schiedel Chimney Systems for Stove and Chimney Installers!
Whenever you register an installation with our easy to use, online guarantee
registration portal, you will now accrue points based on the number of installations and
installation type.
Once you have reached a minimum of 25 points, you can begin to redeem them for
£25 Love2Shop vouchers.
So head on over to the portal and start to register your installations to take full
advantage of our Lifetime Guarantee on Flex, and also to start earning points!
17. Follow us on Social Media @SchiedelUK
Schiedel Chimney Systems Ltd.
Crowther Road, Crowther Ind. Est.
Washington, Tyne & Wear
NE38 0AQ
Tel: +44 191 4161150
sales.uk@schiedel.com
www.schiedel.com/uk
Complementary Products and Services
from Schiedel Chimney Systems
ICS
Twin Wall Insulated System Chimney for gas,
oil and multi-fuel applications.
ICID PLUS
The NEW highly Insulated Twin Wall System
Chimney for traditional stoves, pellet stoves,
biomass appliances, mini/micro CHP and condensing
boilers capable of withstanding positive pressure.
PRIMA PLUS
Single Wall Stainless Steel Flue System
IGNIS-PROTECT
Designed specifically for Air Tight, Energy Efficient
and Timber Framed Buildings
• Easy twist lock connection
• Effective insulation
• 100-200mm Internal diameter range
• Simple push-fit jointing system
• High efficiency Superwool insulation blanket
• Capillary break prevents moisture being drawn
through the joint
• 80-300mm Diameter range
• Suitable for SW and DW connecting flue pipes
passing through interior or exterior walls made of
combustible materials
• Available in both 90° and 45° version
• Prima Plus available 0.6mm or 1mm options for
domestic multi-fuel stoves
• Prima Plus for large residential & commercial
condensing gas & oil appliances & chimney relining
• 80-300mm Diameter range
DM & LINERS
Pumice System Chimneys, Firechests and Liners.
• Pumice is a natural insulator, able to maintain the
temperature of flue gases
• Lightweight – allowing one person to lift and build
the chimney units
• Pumice expands and contracts less with
temperature change than other chimney systems.
PRIMA SMOOTH
Single Wall Stainless Steel Connecting Flue Pipe
for use on wood and multi-fuel applications.
• 316L Grade stainless steel
• Available in matt black or steel finish
• Excellent aesthetics
• Lightweight
• 125-200mm internal diameters
SCHIEDEL INSTALLER REWARDS
Exciting news from Schiedel Chimney Systems!
Whenever you register an installation with our
easy to use, online guarantee registration portal,
you will now accrue points based on the number
of installations and installation type to redeem for
Love2Shop vouchers!