Bepex proposes collaborating to develop a thermal evaporation process to reduce produced water volumes in the Permian Basin. They have experience applying a similar thermal drying technology (FTTDTM) to oil sands tailings in Canada. A preliminary conceptual design shows thermal drying could reduce water disposal costs per barrel of oil by over 30% compared to alternatives like trucking. Bepex recommends bench and pilot testing to evaluate technical and economic feasibility for the specific Permian Basin conditions.
General Water Treatment For Cooling Water
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 CHOICE OF COOLING SYSTEM
4.1 ‘Once through' Cooling Systems
4.2 Open Evaporative Recirculating Systems
4.3 Closed Recirculating Systems
4.4 Comparison of Cooling Systems
5 MAKE-UP WATER QUALITY
6 FOULING PROCESSES
6.1 Deposition
6.2 Scaling
6.3 Corrosion
6.4 Biological Growth
7 CONTROL OF THE COOLING SYSTEM
7.1 ‘Once through' Cooling Systems
7.2 Closed Recirculating Systems
7.3 Open Evaporative Cooling Systems
TABLES
1 RELATIVE IMPORTANCE OF FOULING PROCESSES AND INSTALLED COSTS
2 WATER QUALITY PARAMETERS
FIGURES
1 PREDICTION OF CALCIUM CARBONATE SCALING
2 CALCIUM SULFATE SOLUBILITY
3 CALCIUM PHOSPHATE SCALING INDEX
The primary raw materials used in the production of paper include pulp fiber, thermal and electrical energy, chemicals, and water. Increased profitability through cost savings can be realized through reductions in these key commodities.
General Water Treatment For Cooling Water
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 CHOICE OF COOLING SYSTEM
4.1 ‘Once through' Cooling Systems
4.2 Open Evaporative Recirculating Systems
4.3 Closed Recirculating Systems
4.4 Comparison of Cooling Systems
5 MAKE-UP WATER QUALITY
6 FOULING PROCESSES
6.1 Deposition
6.2 Scaling
6.3 Corrosion
6.4 Biological Growth
7 CONTROL OF THE COOLING SYSTEM
7.1 ‘Once through' Cooling Systems
7.2 Closed Recirculating Systems
7.3 Open Evaporative Cooling Systems
TABLES
1 RELATIVE IMPORTANCE OF FOULING PROCESSES AND INSTALLED COSTS
2 WATER QUALITY PARAMETERS
FIGURES
1 PREDICTION OF CALCIUM CARBONATE SCALING
2 CALCIUM SULFATE SOLUBILITY
3 CALCIUM PHOSPHATE SCALING INDEX
The primary raw materials used in the production of paper include pulp fiber, thermal and electrical energy, chemicals, and water. Increased profitability through cost savings can be realized through reductions in these key commodities.
Valudor DAF, dissolved air flotation, and SHURE technology combine with proce...William Toomey
FLUID PROCESS OPTIMIZATION with Fine Solids Removal through SHURE Advanced Cavitation Management Technology
and Valudor Process Performance Chemicals Process Water Reuse
Intro on different waste treatment technologies by Bernard AmmounBernard Ammoun
This document is a summary of the different waste treatment options developed by Bernard Ammoun as part of his recommendation to the Lebanese Government 2010
Opportunities to garner profits through application of accurate measurement instrumentation to steam production and condensate recovery by eliminating inefficiencies in operation.
To identify key areas in the steam generation cycle, condensate recovery system and waste heat recovery process where cost-effective instrumentation solutions offer a tangible return on investment over the short term. The goal is to reduce heat rate, environmental impact, fuel and water consumption, water treatment and maintenance costs in commercial and heavy industries where steam generation is essential to the production processes.
Protect our Environment while Reducing operational expense Rob Harrison
Oil & Gas producers are facing the economic and financial challenges never seen before. Increase R.O.I., improve employee safety and protect our environment today more than ever!
Kadena USAF Air Base, Okinawa, Japan; Waste To Energy Feasibility StudyJeffrey Riegle
This is the finding report that our team created for the Kadena USAF Air Base, Okinawa, Japan; Waste To Energy Feasibility Study. It looked at three different technologies: Incineration, Plasma Gasification, and Anaerobic Digestion. Lots of good information, and more backup can be found in the report.
Provided technical input, peer review, environmental, and project oversight for a feasibility study to evaluate incineration, plasma gasification, and anaerobic digestion as waste to energy technologies on the island of Okinawa, Japan. Each technology was evaluated for technical feasibility with the current waste stream at KAB, potential energy generation and uses, cost and payback, and potential environmental issues.
Based on this evaluation, a Waste-to-Energy Feasibility Assessment Report was prepared for KAB. This report discusses the feasibility of each of these waste-to-energy technologies, evaluates environmental permitting issues for each technology, recommends uses for generated energy (electricity, steam, etc.), and discusses life cycle costs and payback. Recommendations were made regarding the preferred waste-to-energy technology for implementation at KAB.
Future carbon capture R&D efforts need to focus on cost reductions in three main areas: materials, processes and equipment. In this webinar Ron Munson, the Institute’s Principal Manager – Capture, gave an overview of the current directions in carbon capture R&D, including development of higher performance solvents, sorbents and membranes; process improvements and intensification; equipment development; and novel equipment designs.
Valudor DAF, dissolved air flotation, and SHURE technology combine with proce...William Toomey
FLUID PROCESS OPTIMIZATION with Fine Solids Removal through SHURE Advanced Cavitation Management Technology
and Valudor Process Performance Chemicals Process Water Reuse
Intro on different waste treatment technologies by Bernard AmmounBernard Ammoun
This document is a summary of the different waste treatment options developed by Bernard Ammoun as part of his recommendation to the Lebanese Government 2010
Opportunities to garner profits through application of accurate measurement instrumentation to steam production and condensate recovery by eliminating inefficiencies in operation.
To identify key areas in the steam generation cycle, condensate recovery system and waste heat recovery process where cost-effective instrumentation solutions offer a tangible return on investment over the short term. The goal is to reduce heat rate, environmental impact, fuel and water consumption, water treatment and maintenance costs in commercial and heavy industries where steam generation is essential to the production processes.
Protect our Environment while Reducing operational expense Rob Harrison
Oil & Gas producers are facing the economic and financial challenges never seen before. Increase R.O.I., improve employee safety and protect our environment today more than ever!
Kadena USAF Air Base, Okinawa, Japan; Waste To Energy Feasibility StudyJeffrey Riegle
This is the finding report that our team created for the Kadena USAF Air Base, Okinawa, Japan; Waste To Energy Feasibility Study. It looked at three different technologies: Incineration, Plasma Gasification, and Anaerobic Digestion. Lots of good information, and more backup can be found in the report.
Provided technical input, peer review, environmental, and project oversight for a feasibility study to evaluate incineration, plasma gasification, and anaerobic digestion as waste to energy technologies on the island of Okinawa, Japan. Each technology was evaluated for technical feasibility with the current waste stream at KAB, potential energy generation and uses, cost and payback, and potential environmental issues.
Based on this evaluation, a Waste-to-Energy Feasibility Assessment Report was prepared for KAB. This report discusses the feasibility of each of these waste-to-energy technologies, evaluates environmental permitting issues for each technology, recommends uses for generated energy (electricity, steam, etc.), and discusses life cycle costs and payback. Recommendations were made regarding the preferred waste-to-energy technology for implementation at KAB.
Future carbon capture R&D efforts need to focus on cost reductions in three main areas: materials, processes and equipment. In this webinar Ron Munson, the Institute’s Principal Manager – Capture, gave an overview of the current directions in carbon capture R&D, including development of higher performance solvents, sorbents and membranes; process improvements and intensification; equipment development; and novel equipment designs.
Remote sensing and monitoring are changing the mining industry for the better. These are providing innovative solutions to long-standing challenges. Those related to exploration, extraction, and overall environmental management by mining technology companies Odisha. These technologies make use of satellite imaging, aerial photography and sensors to collect data that might be inaccessible or from hazardous locations. With the use of this technology, mining operations are becoming increasingly efficient. Let us gain more insight into the key aspects associated with remote sensing and monitoring when it comes to mining.
RMD24 | Debunking the non-endemic revenue myth Marvin Vacquier Droop | First ...BBPMedia1
Marvin neemt je in deze presentatie mee in de voordelen van non-endemic advertising op retail media netwerken. Hij brengt ook de uitdagingen in beeld die de markt op dit moment heeft op het gebied van retail media voor niet-leveranciers.
Retail media wordt gezien als het nieuwe advertising-medium en ook mediabureaus richten massaal retail media-afdelingen op. Merken die niet in de betreffende winkel liggen staan ook nog niet in de rij om op de retail media netwerken te adverteren. Marvin belicht de uitdagingen die er zijn om echt aansluiting te vinden op die markt van non-endemic advertising.
Unveiling the Secrets How Does Generative AI Work.pdfSam H
At its core, generative artificial intelligence relies on the concept of generative models, which serve as engines that churn out entirely new data resembling their training data. It is like a sculptor who has studied so many forms found in nature and then uses this knowledge to create sculptures from his imagination that have never been seen before anywhere else. If taken to cyberspace, gans work almost the same way.
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
RMD24 | Retail media: hoe zet je dit in als je geen AH of Unilever bent? Heid...BBPMedia1
Grote partijen zijn al een tijdje onderweg met retail media. Ondertussen worden in dit domein ook de kansen zichtbaar voor andere spelers in de markt. Maar met die kansen ontstaan ook vragen: Zelf retail media worden of erop adverteren? In welke fase van de funnel past het en hoe integreer je het in een mediaplan? Wat is nu precies het verschil met marketplaces en Programmatic ads? In dit half uur beslechten we de dilemma's en krijg je antwoorden op wanneer het voor jou tijd is om de volgende stap te zetten.
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
Putting the SPARK into Virtual Training.pptxCynthia Clay
This 60-minute webinar, sponsored by Adobe, was delivered for the Training Mag Network. It explored the five elements of SPARK: Storytelling, Purpose, Action, Relationships, and Kudos. Knowing how to tell a well-structured story is key to building long-term memory. Stating a clear purpose that doesn't take away from the discovery learning process is critical. Ensuring that people move from theory to practical application is imperative. Creating strong social learning is the key to commitment and engagement. Validating and affirming participants' comments is the way to create a positive learning environment.
Attending a job Interview for B1 and B2 Englsih learnersErika906060
It is a sample of an interview for a business english class for pre-intermediate and intermediate english students with emphasis on the speking ability.
Explore our most comprehensive guide on lookback analysis at SafePaaS, covering access governance and how it can transform modern ERP audits. Browse now!
As a business owner in Delaware, staying on top of your tax obligations is paramount, especially with the annual deadline for Delaware Franchise Tax looming on March 1. One such obligation is the annual Delaware Franchise Tax, which serves as a crucial requirement for maintaining your company’s legal standing within the state. While the prospect of handling tax matters may seem daunting, rest assured that the process can be straightforward with the right guidance. In this comprehensive guide, we’ll walk you through the steps of filing your Delaware Franchise Tax and provide insights to help you navigate the process effectively.
Filing Your Delaware Franchise Tax A Detailed Guide
REDUCED DISPOSAL COST OF PRODUCED AND FLOWBACK WATER
1. Applying thermal
processing to the
oil patch
A case study in collaboration that has the
potential to address the produced water
challenge.
Jonathan Matthews, P.E.
Magpie Consulting, Inc
12. Who is Bepex?
Process Technology and Systems Provider
Thermal & Separation
Agglomeration/Particle Enlargement
Size Reduction/Micronizing
Solids product and process development
Over 125 years in business
25,000 ft2 Pilot Plant
Over 5,000 installations globally
Over 500 in Texas alone, primarily in the
petrochemical industry