shares at the time of using different tools, in addition to their exclusive use and different ways of preventing risks in industrial work.

2. ALWAYS EXAMINE THE TOOL FOR DAMAGES
BEFORE USE
>TRUE

3. IT IS OK TO WEAR LOOSE CLOTHING,
DANGLING OBJECTS AND JEWELLERY USING
HAND TOO
>FALSE

4. KEEP CORDS AND HOSES AWAY FROM
HEATS, OIL HAND SHARPS
>TRUE

5. USE ONLY TOOLS AND EQUIPMENT
IN GOOD CONDITION
>TRUE
TRUE

6. IT IS OK TO MAKE ADJUSTMENTS OR CLEAR
A JAM WHILE THE POWER TOOL IS
RUNNING.
>FALSE

7. IF ANY TOOL BREAKS OR
MALFUNCTIONS, REPORT IT TO
YOUR SUPERVISOR IMMEDIATELY
>TRUE

8. BEFORE CONNECTING TO A POWER SOURCE,
MAKE SURE THE POWER IS ON.
>FALSE

9. SAFETY GLASSES SHALL ALWAYS BE
WORN WHENEVER YOU ARE USING
POWER HAND TOOL
>TRUE

10. THERE ARE SEVERAL TYPES OF
POWER TOOLS, INCLUDING
ELECTRIC, PNEUMATIC, HYDRAULIC
>TRUE

11. NEVER USE ELECTRIC TOOLS IN WET
CONDITIONS
>TRUE

12. WHEN NOT IN USE, POWER TOOLS
SHOULD BE DISCONNECTED.
>TRUE

13. KEEP SAFE DISTANCE BETWEEN
YOUR HANDS AND ALL MOVING
PARTS OF THE POWER TOOL
>TRUE

14. DON’T LEAVE A POWER
TOOL UNATTENDED WHILE IT IS
RUNNING
>TRUE

15. IT IS OK TO STARTLE SOMEONE
WHO IS USING A POWER TOOL
>FALSE

16. USE SAFETY GUARDS EXACTLY AS
THEY ARE SUPPOSED TO BE USED
>TRUE

17. WHEN TIGHTENING A NUT WITH AN
ADJUSTABLE WRENCH, ALWAYS PULL
THE WRENCH TOWARD YOU; NEVER
PUSH THE WRENCH AWAY FROM YOU.
>TRUE

18. PLASTIC COVERED HANDLES ON
WIRE-CUTTING PLIERS MAY BE
USED TO CUT LOW-VOLTAGE LIVE
ELECTRICAL WIRE.
>TRUE

19. SCREWDRIVERS MAY BE USED FOR
PURPOSES OTHER THAN DRIVING
OR REMOVING SCREWS, FOR
EXAMPLE AS A CHISEL.
>FALSE

20. WHEN SELECTING A STANDARD
SCREWDRIVER BE CERTAIN THAT THE TIP IS
ALMOST AS THICK AND AS WIDE AS THE
SLOT OF THE HEAD OF A SCREW.
>TRUE

21. WHEN USING A HACKSAW, SAFETY
GLASSES MUST BE WORN
>TRUE

22. WHEN YOU ARE FINISHED USING A
HACKSAW, TENSION SHOULD BE EASED
>TRUE