This document contains true/false questions about safe tool use. Key points include: always inspect tools for damage before use; do not wear loose clothing or jewelry when using tools; keep cords and hoses away from heat sources; use tools only in good condition; do not make adjustments to powered tools while running; report any broken tools to a supervisor; wear safety glasses when using powered tools; disconnect powered tools when not in use; keep a safe distance from moving tool parts; do not leave powered tools unattended; and always follow safety guards as intended.

1. 1. Always examine the tool for
damages before use.
A).true

2. 2. It is OK to wear loose clothing, dangling
objects and jewellery using hand tool.
B). False

3. 3. Keep cords and hoses away from
heat, oil and sharp edges.
A).True

4. 4. Use only tools and equipment in good
condition.
A).True

5. 5. It is OK to make
adjustments or clear a jam
while the power tool is
running.
B. False

6. 6. If any tool breaks or malfunctions,
report it to your supervisor
immediately.
A).true

7. 7. Before connecting to a power source,
make sure the power is on.
A).true

8. 8. Safety glasses shall always be
worn whenever you are using power
hand tool.
A).true

9. 9. There are several types of power
tools, including electric, pneumatic,
hydraulic.
A).true

10. 10. Never use electric tools in wet
conditions.
A).true

11. 11. When not in use, power tools
should be disconnected.
A).true

12. 12. Keep safe distance between your
hands and all moving parts of the
power tool.
A).true

13. 13. Don’t leave a power tool
unattended while it is running.
A).true

14. 14. It is OK to startle someone who is
using a power tool.
B).false

15. 15. Use safety guards exactly as they
are supposed to be used.
A).true

16. 16. When tightening a nut with an
adjustable wrench, always pull the wrench
toward you; never push the wrench away
from you.
A).true

17. 17. Plastic covered handles on wire-
cutting pliers may be used to cut low-
voltage live electrical wire.
A).true

18. 18. Screwdrivers may be used for purposes
other than driving or removing screws, for
example as a chisel.
B).false

19. 19. When selecting a standard screwdriver
be certain that the tip is almost as thick
and as wide as the slot of the head of a
screw.
A).true

20. 20. When using a hacksaw, safety
glasses must be worn.
A).True

21. 21. When you are finished using a
hacksaw, tension should be eased.
A). True