The document contains safety guidelines for using various power tools and hand tools. It states that tools should always be examined for damage before use, loose clothing and dangling objects should not be worn while using hand tools, cords and hoses should be kept away from heat and sharp edges. When using power tools, safety glasses should always be worn, electric tools should not be used in wet conditions, and tools should be disconnected when not in use. It also provides additional guidelines about keeping a safe distance from moving parts, not leaving tools unattended, using safety guards properly, and easing tension when finished using a hacksaw.

1. IVONNE TATIANA MEZA
MESA
900885
INGLES
TECNOLOGO EN MANTENIMIENTO ELECTROMECANICO INDUSTRIAL

2. Always examine the tool for
damages before use
TRUE

3. It is OK to wear loose clothing,
dangling objects and jewellery
using hand tool
FALSE

4. Keep cords and hoses away
from heat, oil and sharp edges
TRUE

5. Use only tools and equipment in
good condition
TRUE

6. It is OK to make adjustments or
clear a jam while the power
tool is running
FALSE

7. If any tool breaks or
malfunctions, report it to your
supervisor immediately.
TRUE

8. Before connecting to a
power source, make sure
the power is on FALSE

9. Safety glasses shall always be
worn whenever you are using
power hand tool
TRUE

10. There are several types of power
tools, including electric,
pneumatic, hydraulic
TRUE

11. Never use electric tools in
wet conditions
TRUE

12. When not in use, power
tools should be
disconnected
TRU
E

13. Keep safe distance between
your hands and all moving
parts of the power tool
TRUE

14. Don’t leave a power tool
unattended while it is
running
TRUE

15. It is OK to startle someone
who is using a power tool
FALSE

16. Use safety guards exactly as
they are supposed to be
used
TRUE

17. When tightening a nut with an
adjustable wrench, always pull
the wrench toward you; never
push the wrench away from you
TRUE

18. Plastic covered handles on
wire-cutting pliers may be used
to cut low-voltage live electrical
wire TRUE

19. Screwdrivers may be used for
purposes other than driving or
removing screws, for example as a
chisel
FALSE

20. When selecting a standard
screwdriver be certain that the tip
is almost as thick and as wide as
the slot of the head of a screw
TRUE

21. When using a hacksaw,
safety glasses must be wornTRUE

22. When you are finished using
a hacksaw, tension should
be eased
TRUE