<iframe width="668" height="714" src="//www.slideshare.net/slideshow/embed_code/key/6erElhYfdQcGwM"> </iframe> <div> <strong> <a>Socket set</a> </strong> from <strong><a>edwinmales5</a></strong> </div>

1. Always examine the tool for
damages before use. True

2. 2. It is OK to wear loose clothing, dangling
objects and jewellery using hand tool.
False

3. 3. Keep cords and hoses away from
heat, oil and sharp edges.
True

4. Use only tools and equipment in good
condition.
A. True

5. 5. It is OK to make adjustments or clear a
jam while the power tool is running.
False

6. If any tool breaks or malfunctions,
report it to your supervisor immediately.
True

7. 7. Before connecting to a power source,
make sure the power is on.
False

8. . Safety glasses shall always be worn
whenever you are using power hand tool.
True

9. 9. There are several types of power tools,
including electric, pneumatic, hydraulic.
True

10. . Never use electric tools in
wet conditions. True

11. When not in use, power tools should be
disconnected.
A. True

12. . Keep safe distance between your hands
and all moving parts of the power tool.
A. True

13. Don’t leave a power tool unattended
while it is running.
True

14. Use safety guards exactly as they are
supposed to be used.
False

15. 16. When tightening a nut with an adjustable
wrench, always pull the wrench toward you; never
push the wrench away from you.
A. True

16. 17. Plastic covered handles on wire-cutting
pliers may be used to cut low-voltage live
electrical wire. true

17. Screwdrivers may be used for purposes
other than driving or removing screws, for
example as a chisel.
False

18. 19. When selecting a standard screwdriver
be certain that the tip is almost as thick and
as wide as the slot of the head of a
True

19. When using a hacksaw, safety glasses
must be worn.
True

20. When you are finished using a hacksaw,
tension should be
false