...

1. QUESTION EXCERPT

2. 1-ALWAYS EXAMINE THE TOOL FOR
DAMAGES BEFORE USE.
TRUE!

3. 2-IT IS OK TO WEAR LOOSE CLOTHING,
DANGLING OBJECTS AND JEWELLERY USING
HAND TOOL.
FALSE

4. 3-KEEP CORDS AND HOSES AWAY
FROM HEAT, OIL AND SHARP EDGES.
TRUE

5. 4-USE ONLY TOOLS AND EQUIPMENT IN
GOOD CONDITION.
TRUE

6. 5-IT IS OK TO MAKE ADJUSTMENTS OR CLEAR
A JAM WHILE THE POWER TOOL IS RUNNING
FALSE

7. 6-IF ANY TOOL BREAKS OR MALFUNCTIONS,
REPORT IT TO YOUR SUPERVISOR
IMMEDIATELY
TRUE

8. 7-BEFORE CONNECTING TO A POWER
SOURCE, MAKE SURE THE POWER IS ON.
TRUE

9. 8-SAFETY GLASSES SHALL ALWAYS BE WORN
WHENEVER YOU ARE USING POWER HAND
TOOL
FALSE

10. 9-THERE ARE SEVERAL TYPES OF POWER
TOOLS, INCLUDING ELECTRIC, PNEUMATIC,
HYDRAULIC
TRUE

11. 10-NEVER USE ELECTRIC TOOLS IN WET
CONDITIONS
TRUE

12. 11-WHEN NOT IN USE, POWER TOOLS
SHOULD BE DISCONNECTED
TRUE

13. 12-KEEP SAFE DISTANCE BETWEEN YOUR
HANDS AND ALL MOVING PARTS OF THE
POWER TOO
TRUE

14. 13-DON’T LEAVE A POWER TOOL
UNATTENDED WHILE IT IS RUNNING
FALSE

15. 14-IT IS OK TO STARTLE SOMEONE WHO
IS USING A POWER TOOL
FALSE

16. 15-USE SAFETY GUARDS EXACTLY AS
THEY ARE SUPPOSED TO BE USED
TRUE

17. 16-WHEN TIGHTENING A NUT WITH AN
ADJUSTABLE WRENCH, ALWAYS PULL THE
WRENCH TOWARD YOU; NEVER PUSH THE
WRENCH AWAY FROM YOU
TRUE

18. 17-WHEN TIGHTENING A NUT WITH AN
ADJUSTABLE WRENCH, ALWAYS PULL THE
WRENCH TOWARD YOU; NEVER PUSH THE
WRENCH AWAY FROM YOU
TRUE

19. 18-SCREWDRIVERS MAY BE USED FOR
PURPOSES OTHER THAN DRIVING OR
REMOVING SCREWS, FOR EXAMPLE AS A
CHISE
FALSE

20. 19-WHEN SELECTING A STANDARD
SCREWDRIVER BE CERTAIN THAT THE TIP IS
ALMOST AS THICK AND AS WIDE AS THE
SLOT OF THE HEAD OF A SCREW.
A. TRUE
TRUE

21. 20-WHEN USING A HACKSAW, SAFETY
GLASSES MUST BE WORN
TRUE

22. 21-WHEN YOU ARE FINISHED USING A
HACKSAW, TENSION SHOULD BE EASED
TRUE