This document provides details about a presentation on analyzing a building using ETABS software and implementing concepts of a zero energy building. It includes an introduction to zero energy buildings, objectives of analyzing a building in ETABS and manually, methodology used which involves modeling the building in ETABS and AutoCAD, assigning loads and materials, analyzing, comparing results, and implementing zero energy concepts. It also includes a literature review summarizing several papers on zero energy buildings and their key observations. The methodology adopted for the zero energy building focuses on passive design optimization, reducing operational energy and eliminating fossil fuels while providing onsite renewable energy and limiting upfront carbon.

1. ADICHUNCHANAGIRI INSTITUTE OF TECHNOLOGY
“ANALYSIS USING ETABS AND IMPLEMENTATION
OF ZERO ENERGY BUILDING”
BATCH NUMBER : 07
|| Jai Sri Gurudev ||
Sri Adichunchanagiri Shikshana Trust
Chikkamagaluru – 577102, Karnataka
(Affiliated to Visvesvaraya Technological University, Belagavi,
Approved by AICTE, New Delhi and Recognised by Govt. of Karnataka)
ACCREDITED BY NAAC,NBA, ISO 9001:2008 CERTIFIED
Department of Civil Engineering
Phase - II
Presentation on
Rohith K S 4AI19CV055
Thejaswini B C 4AI19CV077
Sudarshan J M 4AI19CV070
Preetham B 4AI19CV049
CO-ORINATORS :
1. Mr. Abhilash D T
Assistant Professor
2. Mr. Goutham D R
Assistant Professor
UNDER THE GUIDANCE OF :
Mrs. Ashwini B T
Assistant Professor
Department of Civil Engineering
AIT, Chikkamagaluru

2.  INTODUCTION
 LITERATURE REVIEW
 OBJECTIVES
 METHODOLOGY
 REFERENCES
CONTENTS

3.  Zero energy refers to the consumption of zero energy from the production but by utilising the energy generated
by using the renewable sources of energy that are freely available in the atmosphere such as solar energy, wind
energy, rain water harvesting etc.
INTRODUCTION
 A Zero Energy Building (ZEB), also known as a Net Zero Energy (NZE) building, is a building with net zero
energy consumption, meaning the total amount of energy used by the building on an annual basis is equal to the
amount of renewable energy created on the site or in other definitions by renewable energy sources offsite,
using technology such as heat pumps, high efficiency windows and insulation, and solar panels.
 In the history of our planet periodically climate change has happened before but for the first time these changes
associated with human activities. Carbon dioxide (CO2) that is emitted during the combustion of fossil fuels
changes the composition of our atmosphere. The uncontrolled use of fossil energy leads to the depletion of
world reserves of non-renewable energy sources. The area, where it is possible to reduce the consumption of
fuel and, consequently, energy consumption and emissions into the atmosphere, is the housing stock, which
according to various estimates consumes 30 to 40 % of all energy.

4.  The goal is that these buildings contribute less overall greenhouse gas to the atmosphere during operations
than similar NON-ZNE buildings.
 The development of zero-energy buildings is encouraged by the desire to have less of an impact on the
environment, and by tax breaks and savings on energy costs that make zero-energy buildings financially
viable.
 The development of modern zero-energy buildings became possible largely through the progress made in
new energy and construction technologies and techniques.
 These include highly insulating spray-foam insulation, high-efficiency solar panels, high-efficiency heat
pumps and highly insulating, low emissivity, triple and quadruple-glazed windows.
 These innovations have also been significantly improved by academic research, which collects precise
energy performance data on traditional and experimental buildings and provides performance parameters
for advanced computer models to predict the efficiency of engineering designs.

5. LITERATURE REVIEW
SL
No
Name of the
Author
Paper Title Journal
Name, Year
Observations
1. Parker D.S. et.al. On the path to Zero
Energy Homes. 2001
 Parker and team during times of peak demand, concluded that on
a study of energy consumption as a Zero Energy Home generated
more power than the house uses, thereby reducing power demand
on the utility provider. During times of power outage, the home
generates its own power, allowing the homeowner essential
energy security.
 In a Florida study, a prototype Zero Energy Home outperforms a
conventional model by providing almost all of its own power
needs throughout the year.
2. J. Laustsen Energy Efficiency Policies
for New Buildings. 2008
 According to Lausten The Net Zero Energy Buildings are
buildings that over a year are neutral, meaning that they deliver as
much energy to the supply grids as they use from the grids.
 Seen in these terms they do not need any fossil fuel for heating,
cooling, lighting or other energy uses although they sometimes
draw energy from the grid” The issue of large storage, energy
losses either in storing or converting energy and oversized
renewable resources in autonomous ZEB compared to grid-
connected ZEB become a public discussion.

6. Sl
No
Name of the
Author
Paper Tiltle Journal
Name, Year
Observations
3. K. Voss, et.al. What is Really New
about Zero Energy
Homes?. 2008
 According to K. Voss while the energy systems used in off-grid
buildings have to be over-dimensioned, especial in term of
storage, in order to provide energy at all times [Goetzberger
1994], in grid-connected projects the goal is simply to have the
total amount of energy consumed in the building over the course
of year offset by the total amount produces. The connection to
the power grid therefore plays a decisive role as a sort of storage
battery for electricity, especially in Europe across seasons.
4. M. Noguchi, et.al. Net Zero Energy Homes
of the Future. 2008
 In this paper,of Noguchi and his team a net zero-energy home
(NZEH) is defined as a house that consumes as much energy as
it produces over a year and after few pages authors describe:
The BIPV/T system is an on-grid application accompanied with
an inverter for the AC/DC conversion. The system allows for
redirection of the locally generated electricity surpluses to the
grid.

7. Sl
No
Name of the
Author
Paper Title Journal
Name, Year
Observation
5. Nicolae Bajenaru
et.al
Evaluation of the energy
performance for a nZEB
office Building under
climatic conditions. 2015
 Nicolae carried out a simulation work regarding the design
of a net zero energy office building with a mixed mode
ventilation system which assures the thermal comfort of
the occupants according to the ASHRAE 55/2010
Standard In India, with a rational consumption of energy
and a minimal environmental impact. The study relied on
the use of easily accessible building materials and
customary Air Conditioning (AC) equipment, in order to
meet the requirements.

8. The following are the objectives
 Analysis and design of residential building by ETABS.
 Analysis and design of residential building by using manual method.
 Comparison of results obtained from both methods.
 To use natural resources ( like solar, water and wind energy) more efficiently and reduce a
buildings negative impact on the environment.
 Implementation of zero-energy concepts.
OBJECTIVES

9. PROPOSED PLAN FOR THE PROJECT

10. METHODOLOGY FOR ANALYSIS OF BUILDING
METHODOLOGY USING SOFTWARE
PREPARATION OF PLAN IN AUTOCAD
IMPORTING TO ETABS
BUILDING MODELLING IN ETABS
ASSIGNING LOAD
DEFINE AND ASSIGNING OF MATERIALS
ANALYSE & DESIGN OF BUILDING MODEL
RESULTS AND DISCUSSION
CONCLUSION
BY MANUAL METHOD
 FIXED END MOMENTS
 ROTATION FACTORS
 ROTATION MOMENTS
 ITERATION CYCLE
 FINAL MOMENTS
FINAL MOMENTS :
MAB = MFAB + 2M’AB + M’BA
MBA = MFBA + 2M’BA + M’AB
KANI’S METHOD

11. ASSUMPTIONS :
• Type of structure: Framed
• Form of structure: Slab-beam type
• Type of material: Concrete
• Grade of steel: Fe-500
• Grade of concrete: M-30
• Method of construction: RCC
• Density of RCC: 25kN/m3
• Density of burnt brick masonry:19 kN/m3
• The live load for Residential building the slab is taken as 2kN/m2
• The wind load is considered as the height of building is exceeding the effective width as
per [clause no. 4.3.4(a)] of IS 875-1987.
ANALYSIS USING ETABS :

12. DIMENSIONS AND LOADS ASSIGNED
• Beam 230*450mm
• Column 300*450mm
• Slab thickness 150mm
• Wall thickness 230mm
• Parapet wall height 0.9m
DEAD LOADS:
• Dead load calculation Weight= Volume*Density
• Dead load is calculated as per IS 875 Part-1
LIVE LOADS:
Live loads are calculated as per IS 875 Part-2
LOAD COMBINATION:
• All the load cases are tested by taking load factors and analyzing the building in different load combination is
done as per IS: 456-2000.
• load combination is done as per IS: 456-2000.
• Load factor as per: IS 456-2000.
• 1.5(D.L + L.L)
• Structure is analyzed by taking the above combination

13. COLUMN PLAN

14. REACTION AND LOADING

15. SHEAR FORCE AND BENDING MOMENT DIAGRAM
SHEAR FORCE DIAGRAM BENDING MOMENT DIAGRAM

16. DEFLECTION DIAGRAM

17. ANALYSIS USING KANI’S METHOD

19. METHODOLGY OF ZERO ENERGY BUILDING
 Passive design optimisation
 Reduce operational energy demand and consumption
 Eliminate fossil fuels
 Provide onsite renewable energy and storage where possible
 Limit upfront embodied carbon
The following methods are adopted to our project

20.  Parker, D.S., Thomas, M. & Merrigan, T. (2001). On the path to Zero Energy Homes. Produced for the U.S.
Department of Energy by the National Renewable Energy Laboratory.
REFERENCES
 K. Voss, (2008) What is Really New about Zero-Energy Homes? in: 12th International Conference on
Passive Houses, Nuremberg, Germany, 2008.
 J. Laustsen, (2008) Energy Efficiency Requirements in Building Codes, in: Energy Efficiency Policies for
New Buildings, OECD/IEA, Paris, 2008.
 M. Noguchi, A. Athienitis, V. Delisle, J. Ayoub, B. Berneche, (2008) Net Zero Energy Homes of the
Future: A Case Study of the ÉcoTerraTM House in Canada, in: Renewable Energy Congress, Glasgow,
Scotland, July, 2008.
 Nicolae Bajenaru, Andrei Damian, Rodica Frunzulica, (2015) Evaluation of the energy performance for a
nZEB office building under specific climatic conditions, Sustainable Solutions for Energy and
Environment, EENVIRO - YRC 2015, Bucharest, Romania.

21. THANK YOU