Process Piping Expansion Joints
•
0 likes•1,273 views
Expansion joints are applied to process piping and ducting to absorb thermal movements, offset ground settlement and misalignment, noise, vibration and shock.
Report
Share
Report
Share
Download to read offline
![Customer: Date:
Job/Project:
Ref/Tag:
5100U-0000-3.16
Style 5100U Universal Rubber Expansion Joint
© 2016 General Rubber Corporation, All Rights Reserved
Optional
Control Units
Outer Nuts (W/B) Spherical Washer, Inner
Bare (SW/B)
Spherical Washer (SW/SW)
Integral Ring, Spherical Washer
(INT-SW/SW)
Integral Ring, Spherical Washer
(INT-SW/B)
Integral Ring (INT-W/B)
Bill of Materials
Retaining Ring
Gusset
Rods
Nuts
Spherical Washers
Metal Reinforcement
Textile Reinforcement
Carbon Steel
Stainless Steel
Carbon Steel
Stainless Steel
ASTM A193 B7 Alloy Steel
ASTM A193 B8M 316 SS
ASTM A194 2H Steel
ASTM A194 8M 316 SS
Stainless Steel
High Tensile Steel
Tire Cord
Hot DippedGalvanized
Plain
Hot DippedGalvanized
Plain
Hot DippedGalvanized
Plain
Hot DippedGalvanized
Plain
Plain
Rubber Embedded
RFL Coating
ITEM MATERIAL FINISH
No Control Units
general-rubber.com
800-233-6294
Contact General Rubber Corporation for full product specifications, Warnings and installation instructions.
Shown with
Control Unit
SW/B
Mating Flange
(by others)
∅ ID
(DN)
Gusset
Rod
Tube
Retaining Ring
(segmented)
Reinforcement
Cover
Section Detail
Tube
Cover
Tire Cord:
Polyester
Kevlar®
Pure Gum
º F [º C]
180 [82]
180 [82]
Neoprene
º F [º C]
225 [107]
225 [107]
Butyl
º F [º C]
250 [121]
300 [149]
Nitrile
(Buna-N)
º F [º C]
210 [99]
210 [99]
EPDM
º F [º C]
250 [121]
350 [177]
Viton®
(FKM)
º F [º C]
250 [121]
400 [204]
Maximum Temperature rating based on lowest temperature material selected. EPDM or
Butyl w/Polyester Tire Cord rated 300°F (149°C) for Air Service up to 25 psig (1.7 barg)
Nuts
F/F
Available in standard or custom face-to-face dimensions, multiple arches or custom offset arrangements.
PRESSURE WEIGHTPRESSURE WEIGHTPRESSURE WEIGHT
Quantity ID (DN) F/F Axial Compression Torsional Lateral
Flange Drilling Pressure Vacuum Axial Extension Angular (º)
Operational Parameters (customer specified)
Size
M.S. Jacobs & Associates, Inc.
Pittsburgh, PA USA
www.msjacobs.com (800) 348-0089](https://image.slidesharecdn.com/process-piping-expansion-joints-180109013733/85/Process-Piping-Expansion-Joints-1-320.jpg)
Recommended
Slips
Get W series Slips including WK slip, WT casing slip, WZ drilling pipe slip, and WZT drilling collar slip, Suitable for onshore or offshore drilling operations.
Mounted Units 2011 Overview
PTI Corp is a global manufacturer and supplier of power transmission and motion control products headquartered in Charlotte, NC. They offer a wide range of mounted ball bearings, drive products, and linear components. Their products include mounted ball bearings in both American standard and European housings available with different insert types like set screw, eccentric collar, and adapter mounting. They also offer these products in materials like cast iron, ductile iron, stainless steel, and thermoplastic.
Veterinary Orthopedic Instruments catalog from GermedUsa.Com
The document provides information about GerMedUSA's returns and warranty policy for stainless steel instruments. GerMedUSA guarantees all of its surgical instruments for life against manufacturing defects, and will repair or replace defective instruments. The guarantee is limited to repairing or replacing defective items. GerMedUSA's quality control inspectors check each instrument to ensure it meets standards before shipping. Tungsten carbide instruments are covered under a separate warranty except for jaw inserts and gold handles.
Electro steel-engineering-company
Electro Steel Engineering Company, established its operations in the year 1976, as a manufacturer, supplier and exporter of the finest and a diverse range of Motor Pulleys & Accessories.
Air sentry-adapters
AIR SENTRY ADAPTERS FOR EASY INSTALLATION
Flange adapters used with breathers having a 1" slip-fit connection, are used for reservoirs where the tank wall is not thick enough to allow for tapping threads.
Threaded adapters are intended for reservoirs of gearboxes with a wall thickness sufficient for a tapped hole.
Bayonet adapters replaces a standard breather cap on a hydraulic reservoir.
Threaded spin-on adapters replace the standard spin-on particle filters made by many manufacturers.
Inertia dynamics sf1000f_specsheet
This document provides specifications for a Warner Electric SF-1000 flange mounted normal duty clutch, including dimensions, torque and speed ratings, voltage options, and part numbers for its components. The clutch can be ordered in different bore sizes from 0.5-2 inches and inside or outside field mounting. It is UL and CSA listed.
200519 kjf toggle_clamp_hp
Toggle clamp is a product using locking function guaranteed at the dead point of a linkage system of links and pins. It is very convenient to fix workpiece with one-touch when machining constant thickness of workpiece. Toggle clamp’s structure and operating method are simple and it provides high clamping force. Toggle clamp is widely used due to its convenience.
Inertia dynamics flangemtbk304_specsheet
This document provides specifications and ordering information for replacement parts for a flange mounted brake. It includes:
- Keyway bore sizes and dimensions for an H-4 flange mounted brake
- An assembly number and corresponding armature plate, magnet accessory, armature hub assembly, and magnet part numbers for ordering
- Technical data on a Model 304 flange mounted brake including weight, torque, rated speed, voltage and current specifications
- Requirements for customer mounting and dimensions for an Ajusto-gap® armature plate assembly that maintains a constant air gap
Recommended
Slips
Get W series Slips including WK slip, WT casing slip, WZ drilling pipe slip, and WZT drilling collar slip, Suitable for onshore or offshore drilling operations.
Mounted Units 2011 Overview
PTI Corp is a global manufacturer and supplier of power transmission and motion control products headquartered in Charlotte, NC. They offer a wide range of mounted ball bearings, drive products, and linear components. Their products include mounted ball bearings in both American standard and European housings available with different insert types like set screw, eccentric collar, and adapter mounting. They also offer these products in materials like cast iron, ductile iron, stainless steel, and thermoplastic.
Veterinary Orthopedic Instruments catalog from GermedUsa.Com
The document provides information about GerMedUSA's returns and warranty policy for stainless steel instruments. GerMedUSA guarantees all of its surgical instruments for life against manufacturing defects, and will repair or replace defective instruments. The guarantee is limited to repairing or replacing defective items. GerMedUSA's quality control inspectors check each instrument to ensure it meets standards before shipping. Tungsten carbide instruments are covered under a separate warranty except for jaw inserts and gold handles.
Electro steel-engineering-company
Electro Steel Engineering Company, established its operations in the year 1976, as a manufacturer, supplier and exporter of the finest and a diverse range of Motor Pulleys & Accessories.
Air sentry-adapters
AIR SENTRY ADAPTERS FOR EASY INSTALLATION
Flange adapters used with breathers having a 1" slip-fit connection, are used for reservoirs where the tank wall is not thick enough to allow for tapping threads.
Threaded adapters are intended for reservoirs of gearboxes with a wall thickness sufficient for a tapped hole.
Bayonet adapters replaces a standard breather cap on a hydraulic reservoir.
Threaded spin-on adapters replace the standard spin-on particle filters made by many manufacturers.
Inertia dynamics sf1000f_specsheet
This document provides specifications for a Warner Electric SF-1000 flange mounted normal duty clutch, including dimensions, torque and speed ratings, voltage options, and part numbers for its components. The clutch can be ordered in different bore sizes from 0.5-2 inches and inside or outside field mounting. It is UL and CSA listed.
200519 kjf toggle_clamp_hp
Toggle clamp is a product using locking function guaranteed at the dead point of a linkage system of links and pins. It is very convenient to fix workpiece with one-touch when machining constant thickness of workpiece. Toggle clamp’s structure and operating method are simple and it provides high clamping force. Toggle clamp is widely used due to its convenience.
Inertia dynamics flangemtbk304_specsheet
This document provides specifications and ordering information for replacement parts for a flange mounted brake. It includes:
- Keyway bore sizes and dimensions for an H-4 flange mounted brake
- An assembly number and corresponding armature plate, magnet accessory, armature hub assembly, and magnet part numbers for ordering
- Technical data on a Model 304 flange mounted brake including weight, torque, rated speed, voltage and current specifications
- Requirements for customer mounting and dimensions for an Ajusto-gap® armature plate assembly that maintains a constant air gap
Axial ball check valve welded design-904n-Guichon valves
Automated protection
To protect the installation against damages caused by line overpressure.
Compact design, low pressure loss.
DN 15 to DN 100
1/2" à 4"
PN 10 to PN 100
acc. to DN
150 to 600 lbs acc. to DN
BASIC ORTHOPEDIC INSTRUMENTS
This document is an orthopedic instrument catalog that lists 31 categories of orthopedic instruments. It provides the item numbers, names, descriptions and sizes for over 100 individual orthopedic instruments, including plaster instruments, amputation saws, reamers, bone drills, bone holding clamps, vise grips, and more. Contact information is provided at the top for the catalog distributor.
AllflexWebpages2011
AllFlex manufactures stainless steel thread cutting and self-tapping fasteners in the USA. They are ideal for applications involving dissimilar metals like aluminum curtain walls and windows due to their Stalgard GB coating, which provides galvanic protection against corrosion. Stainless steel offers long-term corrosion resistance in harsh environments while the coating preserves both the fastener and material integrity over the long term.
Flange Bolts Australasia Brochure 2016 - A Division of WDS Group
Flange Bolts Australasia (FBA) is one of the most recognized names in specialised flanged hex products and 12 point fasteners. Before we enter 2017, here is a quick reminder of what makes Flange Bolts Australasia (FBA) different the all other flange products suppliers. For the 2017 brochure, keep a look out at fbabolt.com.au.
Extruder Catalogue Premium
This document describes an extruder gearbox series called the GHE series. It has a power range up to 250 kW and reduction ratios up to 25.6:1. It is used for plastic, PVC, and cable extrusion applications. The document provides details on gears, bearings, lubrication, dimensions, capacities, and specifications.
Expansion Joint Catalogue
This tool has 500 pages of different expansion joint types, technical information, guidelines and inspiration on use of expansion joints. It helps everyone in touch with expansion joints in their daily work.
Bambalela Bolts _Pty_ Ltd - Products our Company stocks and supplies
Bambalela Bolts (Pty) Ltd is a supplier of fasteners and fastener-related products, as well as plastics, steel, capital equipment, and site establishment containers. The company stocks over 9,000 line items and prides itself on its unmatched level of service, supplying anywhere in Africa on time. Bambalela Bolts has the capability to support projects throughout Africa and can read engineering drawings to extract requirements.
Inertia dynamic type fb_specsheet
The document provides information about flange mounted brakes of type FB, including specifications, dimensions, torque and current draw for different models, ordering information, and notes for customers. It lists technical details like mounting dimensions, air gap settings, and inertia for various brake models from FB08 to FB42 that can be used to stop or hold a load coupled to an armature hub.
GermedUsa Small animal Surgical Instrument catalog
All GerMedUSA surgical instruments are guaranteed for life against manufacturing defects and will be repaired or replaced at the company's discretion. The guarantee is valid except for normal wear and tear of tungsten carbide instruments.
GerMedUSA offers veterinarians a complete line of specialty, general, and premium instruments for routine, dental, and surgical procedures.
The document provides product codes and descriptions for various atraumatic forceps, dental elevators, extractors, explorers, rongeurs, scrapers, chisels, gags, mirrors, scalers, curettes, and dressing forceps available from GerMedUSA.
Drywall Lift
The document describes the design of a drywall lift mechanism intended to aid workers in safely installing drywall. Key aspects of the design include:
- The frame and major components are made of durable forged steel to support the weight of drywall while lifting.
- Wheels and bearings are made of grippy urethane and durable aluminum alloy respectively to aid maneuverability while lifting.
- Features include extendable height, ability to rotate drywall 180 degrees, and secure mounting of standard 4' x 8' drywall sheets.
Expansion Joint Basics
American BOA is a manufacturer of industrial expansion joints, metal hoses, and metal bellows. It has a long history dating back to 1898 and is headquartered in Cumming, Georgia with over 120 employees across 3 shifts. The presentation discusses American BOA's key product portfolio including industrial expansion joints, their manufacturing capabilities, quality standards, and the advantages of their multi-ply bellows design which provides improved flexibility, higher pressure ratings, and safety compared to single ply designs.
catalog_2010rev1.9500250
This document is a catalog from LV Tools & Components that lists and describes various parts for air ducts, dampers, and fire dampers. It provides information on quadrants, spindles, brackets, corners, blades and other components along with their specifications, materials, and part numbers. The document contains detailed listings and specifications for regular, heavy duty, light duty, and mini quadrants. It also lists parts for dampers, fire dampers, ducts, and their associated corners and flanges.
SHBxR MOUNT
This document summarizes a technical document about a self-aligning mount and accessories for load cells. The mount allows for horizontal movement of the load cell and can be installed and removed after installation. It provides weighing solutions for various applications like process control and batch weighing. Key features include capacities from 5-500kg and use of hardened materials on load bearing surfaces. Dimensions and additional information on accessories like stay rods are also provided.
aircraft hardware
Producers of aircraft hardware have moved to purchasing parts and tools online from distributors as it is more convenient and cost effective than searching warehouses in person. It is crucial to select a reputable and experienced distributor for aerospace components as there is no room for error in aircraft design and construction. Aircraft bolts and fasteners, though small, serve important roles in providing safe operation and come in a variety of specifications depending on the application. Proper documentation and certifications should be obtained from distributors to ensure quality standards are met.
Oil Field Supplies presentation
Oil Field Supplies is an engineering and management consulting firm with 7 years of experience in the OCTG industry. They specialize in manufacturing and trading casing, tubing, drill pipe, and various thread protectors made from pressed steel, plastic, composite materials, and cast steel. Their goal is to provide quality OCTG products at cost effective prices and ensure customer satisfaction.
CSP-M MOUNT
The document describes the CSP-M self-aligning load cell mounts. It discusses two main types of mounts: 1) A weighbridge mount designed for truck and rail scales that allows for horizontal movement of up to 16 mm; and 2) A silo mount suitable for batch weighing and process control that tolerates movement in all directions. Both mounts use hardened steel components at load bearing surfaces. Dimensions and additional information is provided for the 10-25T and 40-60T capacity mounts.
Bumperite Catalogue #2
The document summarizes a scaffold attachment system called Bumperite Waterguards that enhances safety and eliminates water intrusion at scaffold ties. It discusses the problems with conventional wire ties allowing water intrusion, and describes the Bumperite solution as a sealable scaffold attachment. Installation procedures are provided for different building materials like wood, steel, and concrete. Engineering reports and testing show the product is structurally sound and prevents leaks.
Thomson bsa veethread_specsheet
This document provides information on precision lead screws and supernuts from Ball Screws and Actuators (BS&A). It lists features such as low cost, customization options, variety of sizes, corrosion resistance, and vibration reduction compared to ball screws. It also provides details on material properties, temperature and load limits, accuracy grades, and self-locking characteristics. The document is intended to help customers understand and select the appropriate lead screw solutions for their linear motion needs.
Api 671 4 th edition dresser rand ref x 46091 (3)
This document discusses API 671 requirements for couplings used in gas compression applications and provides recommendations from TB Wood's. Key points include:
- API 671 requires 5+ year minimum service life and higher service factors than normal selection criteria. TB Wood's recommends using standard selection criteria.
- Transient/peak torques should be specified by the purchaser and validated with a torsional analysis. TB Wood's will use standard selection criteria.
- Compliance with API 671 spacer retention and other requirements would require significant modifications from TB Wood's standard designs. Exceptions are recommended where possible to allow use of stock components for repairs.
- Additional costs associated with API 671 compliance include drawings/documentation, engineering time,
TorqMaster Friction Hinge - Zc 250-zc-101-friction-hinge-data-sheet
This document summarizes the features and benefits of the ZC 250 ZC 101 hinge. The hinge provides 360 degree shaft rotation and torque ranges from 7-17 in-lb. It has a slim profile, minimal springback and backlash. Benefits include long cycle life, smooth feel, consistent performance, and availability for immediate delivery. Custom and semi-custom hinge designs are also available to meet specific application needs.
Levelling Feet by GMT
The Levelling Feet product catalogue from GMT Rubber-Metal Technology. This product brochure features technical specifications and diagrams of a wide range of Levelling Feet available within the GMT range
jolly-clamps-company-brochure.pdf
Jolly Clamps Pvt. Ltd. is an industry stalwart providing engineered clamping solutions for over 50+ years for diverse applications in sectors such as Industrial, Automotive-especially heavy-duty truck clamps, Construction, Agriculture irrigation, farm equipment, Filtration, Food & Beverages, Oil and Gas, Off Road vehicles, Renewable energy. Serving both nationally and globally
More Related Content
What's hot
Axial ball check valve welded design-904n-Guichon valves
Automated protection
To protect the installation against damages caused by line overpressure.
Compact design, low pressure loss.
DN 15 to DN 100
1/2" à 4"
PN 10 to PN 100
acc. to DN
150 to 600 lbs acc. to DN
BASIC ORTHOPEDIC INSTRUMENTS
This document is an orthopedic instrument catalog that lists 31 categories of orthopedic instruments. It provides the item numbers, names, descriptions and sizes for over 100 individual orthopedic instruments, including plaster instruments, amputation saws, reamers, bone drills, bone holding clamps, vise grips, and more. Contact information is provided at the top for the catalog distributor.
AllflexWebpages2011
AllFlex manufactures stainless steel thread cutting and self-tapping fasteners in the USA. They are ideal for applications involving dissimilar metals like aluminum curtain walls and windows due to their Stalgard GB coating, which provides galvanic protection against corrosion. Stainless steel offers long-term corrosion resistance in harsh environments while the coating preserves both the fastener and material integrity over the long term.
Flange Bolts Australasia Brochure 2016 - A Division of WDS Group
Flange Bolts Australasia (FBA) is one of the most recognized names in specialised flanged hex products and 12 point fasteners. Before we enter 2017, here is a quick reminder of what makes Flange Bolts Australasia (FBA) different the all other flange products suppliers. For the 2017 brochure, keep a look out at fbabolt.com.au.
Extruder Catalogue Premium
This document describes an extruder gearbox series called the GHE series. It has a power range up to 250 kW and reduction ratios up to 25.6:1. It is used for plastic, PVC, and cable extrusion applications. The document provides details on gears, bearings, lubrication, dimensions, capacities, and specifications.
Expansion Joint Catalogue
This tool has 500 pages of different expansion joint types, technical information, guidelines and inspiration on use of expansion joints. It helps everyone in touch with expansion joints in their daily work.
Bambalela Bolts _Pty_ Ltd - Products our Company stocks and supplies
Bambalela Bolts (Pty) Ltd is a supplier of fasteners and fastener-related products, as well as plastics, steel, capital equipment, and site establishment containers. The company stocks over 9,000 line items and prides itself on its unmatched level of service, supplying anywhere in Africa on time. Bambalela Bolts has the capability to support projects throughout Africa and can read engineering drawings to extract requirements.
Inertia dynamic type fb_specsheet
The document provides information about flange mounted brakes of type FB, including specifications, dimensions, torque and current draw for different models, ordering information, and notes for customers. It lists technical details like mounting dimensions, air gap settings, and inertia for various brake models from FB08 to FB42 that can be used to stop or hold a load coupled to an armature hub.
GermedUsa Small animal Surgical Instrument catalog
All GerMedUSA surgical instruments are guaranteed for life against manufacturing defects and will be repaired or replaced at the company's discretion. The guarantee is valid except for normal wear and tear of tungsten carbide instruments.
GerMedUSA offers veterinarians a complete line of specialty, general, and premium instruments for routine, dental, and surgical procedures.
The document provides product codes and descriptions for various atraumatic forceps, dental elevators, extractors, explorers, rongeurs, scrapers, chisels, gags, mirrors, scalers, curettes, and dressing forceps available from GerMedUSA.
Drywall Lift
The document describes the design of a drywall lift mechanism intended to aid workers in safely installing drywall. Key aspects of the design include:
- The frame and major components are made of durable forged steel to support the weight of drywall while lifting.
- Wheels and bearings are made of grippy urethane and durable aluminum alloy respectively to aid maneuverability while lifting.
- Features include extendable height, ability to rotate drywall 180 degrees, and secure mounting of standard 4' x 8' drywall sheets.
Expansion Joint Basics
American BOA is a manufacturer of industrial expansion joints, metal hoses, and metal bellows. It has a long history dating back to 1898 and is headquartered in Cumming, Georgia with over 120 employees across 3 shifts. The presentation discusses American BOA's key product portfolio including industrial expansion joints, their manufacturing capabilities, quality standards, and the advantages of their multi-ply bellows design which provides improved flexibility, higher pressure ratings, and safety compared to single ply designs.
catalog_2010rev1.9500250
This document is a catalog from LV Tools & Components that lists and describes various parts for air ducts, dampers, and fire dampers. It provides information on quadrants, spindles, brackets, corners, blades and other components along with their specifications, materials, and part numbers. The document contains detailed listings and specifications for regular, heavy duty, light duty, and mini quadrants. It also lists parts for dampers, fire dampers, ducts, and their associated corners and flanges.
SHBxR MOUNT
This document summarizes a technical document about a self-aligning mount and accessories for load cells. The mount allows for horizontal movement of the load cell and can be installed and removed after installation. It provides weighing solutions for various applications like process control and batch weighing. Key features include capacities from 5-500kg and use of hardened materials on load bearing surfaces. Dimensions and additional information on accessories like stay rods are also provided.
aircraft hardware
Producers of aircraft hardware have moved to purchasing parts and tools online from distributors as it is more convenient and cost effective than searching warehouses in person. It is crucial to select a reputable and experienced distributor for aerospace components as there is no room for error in aircraft design and construction. Aircraft bolts and fasteners, though small, serve important roles in providing safe operation and come in a variety of specifications depending on the application. Proper documentation and certifications should be obtained from distributors to ensure quality standards are met.
Oil Field Supplies presentation
Oil Field Supplies is an engineering and management consulting firm with 7 years of experience in the OCTG industry. They specialize in manufacturing and trading casing, tubing, drill pipe, and various thread protectors made from pressed steel, plastic, composite materials, and cast steel. Their goal is to provide quality OCTG products at cost effective prices and ensure customer satisfaction.
CSP-M MOUNT
The document describes the CSP-M self-aligning load cell mounts. It discusses two main types of mounts: 1) A weighbridge mount designed for truck and rail scales that allows for horizontal movement of up to 16 mm; and 2) A silo mount suitable for batch weighing and process control that tolerates movement in all directions. Both mounts use hardened steel components at load bearing surfaces. Dimensions and additional information is provided for the 10-25T and 40-60T capacity mounts.
Bumperite Catalogue #2
The document summarizes a scaffold attachment system called Bumperite Waterguards that enhances safety and eliminates water intrusion at scaffold ties. It discusses the problems with conventional wire ties allowing water intrusion, and describes the Bumperite solution as a sealable scaffold attachment. Installation procedures are provided for different building materials like wood, steel, and concrete. Engineering reports and testing show the product is structurally sound and prevents leaks.
Thomson bsa veethread_specsheet
This document provides information on precision lead screws and supernuts from Ball Screws and Actuators (BS&A). It lists features such as low cost, customization options, variety of sizes, corrosion resistance, and vibration reduction compared to ball screws. It also provides details on material properties, temperature and load limits, accuracy grades, and self-locking characteristics. The document is intended to help customers understand and select the appropriate lead screw solutions for their linear motion needs.
Api 671 4 th edition dresser rand ref x 46091 (3)
This document discusses API 671 requirements for couplings used in gas compression applications and provides recommendations from TB Wood's. Key points include:
- API 671 requires 5+ year minimum service life and higher service factors than normal selection criteria. TB Wood's recommends using standard selection criteria.
- Transient/peak torques should be specified by the purchaser and validated with a torsional analysis. TB Wood's will use standard selection criteria.
- Compliance with API 671 spacer retention and other requirements would require significant modifications from TB Wood's standard designs. Exceptions are recommended where possible to allow use of stock components for repairs.
- Additional costs associated with API 671 compliance include drawings/documentation, engineering time,
TorqMaster Friction Hinge - Zc 250-zc-101-friction-hinge-data-sheet
This document summarizes the features and benefits of the ZC 250 ZC 101 hinge. The hinge provides 360 degree shaft rotation and torque ranges from 7-17 in-lb. It has a slim profile, minimal springback and backlash. Benefits include long cycle life, smooth feel, consistent performance, and availability for immediate delivery. Custom and semi-custom hinge designs are also available to meet specific application needs.
What's hot (20)
Axial ball check valve welded design-904n-Guichon valves
Axial ball check valve welded design-904n-Guichon valves
Flange Bolts Australasia Brochure 2016 - A Division of WDS Group
Flange Bolts Australasia Brochure 2016 - A Division of WDS Group
Bambalela Bolts _Pty_ Ltd - Products our Company stocks and supplies
Bambalela Bolts _Pty_ Ltd - Products our Company stocks and supplies
GermedUsa Small animal Surgical Instrument catalog
GermedUsa Small animal Surgical Instrument catalog
TorqMaster Friction Hinge - Zc 250-zc-101-friction-hinge-data-sheet
TorqMaster Friction Hinge - Zc 250-zc-101-friction-hinge-data-sheet
Similar to Process Piping Expansion Joints
Levelling Feet by GMT
The Levelling Feet product catalogue from GMT Rubber-Metal Technology. This product brochure features technical specifications and diagrams of a wide range of Levelling Feet available within the GMT range
jolly-clamps-company-brochure.pdf
Jolly Clamps Pvt. Ltd. is an industry stalwart providing engineered clamping solutions for over 50+ years for diverse applications in sectors such as Industrial, Automotive-especially heavy-duty truck clamps, Construction, Agriculture irrigation, farm equipment, Filtration, Food & Beverages, Oil and Gas, Off Road vehicles, Renewable energy. Serving both nationally and globally
American Rep Bearing and Components 0116 Low Res
The document is a catalog from Bowman International Limited that provides information on their products and services. It includes details on their various bearing products such as wrapped bearings, ball bearings, plastic bearings, bronze bearings, and more. It also provides brief descriptions of the company's history and objectives, as well as the services they offer including technical support, delivery options, and a machining facility.
General Metals & Polymers, Mumbai , Cutless Rubber Bearings
Suppliers of Flanged Rubber Bearings In Bronze Or S.S. Shell, Metal Sleeve Rubber Bearings In Bronze, S.S. Shell And Hard Composite Sleeve Rubber Bearings.These
Line up
MITSUBOSHI BELTINGS FULL RANGE IN INDIA. MOSTLY ALL SIZES AVAILABLE. ODD SIZS ON DEMAND CAN BE ARRANGED AGAINST ORDERS
Avlock Company Profile
This document provides an overview of engineered riveting, swaging, and automotive fastening systems from AVLOCK International. It describes the company's product range including break stem fasteners, hydranut inserts, hyspeed rivets, hydra lockbolts, and installation tools. The company is a world leading manufacturer and distributor of specialized fasteners with facilities in India and South Africa.
Jgb industrial cleaning catalog
JGB Enterprises complete line of Industrial Cleaning Hoses including Rubber, PVC & Plastic suction, Sewer cleaning, Vacuum, Water washdown & Discharge Hoses, has never made waste transfer so easy to meet the needs of every individual waste management customer. JGB Enterprises supplies a multitude of accessories including aluminum, polypropylene, & stainless camlock quick couplers, hose clamps & tools, strainers & sight glasses, valves, and more!
TECHNICAL DETAILS - KUMARS. Forge and valves
KUMARS Forge & Valves Pvt Ltd manufactures and exports steel forgings, machined components, valves, flanges, and fittings based in India. The document provides details on their product range, which includes valves in various sizes and pressure classes made from carbon steel, alloy steel, stainless steel, and other materials. It also lists forgings, machined components, fittings, flanges, forged and machined balls, and instrumentation valves as other product offerings. Dimension charts and material specifications are provided for some of their forged gate and globe valve products.
ISV 3 PC trunnion ball valve SB600.5b-web(1)
International Standard Valve, Inc. manufactures forged construction trunnion mounted ball valves in sizes 2" through 56" for ASME Class 150-2500 pressure ratings. The document provides details on ISV's quality systems, pressure testing procedures, material specifications, design standards, and production capabilities for their Series BT3EU, BT3E, and BT3G ball valve models.
Api wedge-gate-valve - 2010
china wedge gatevalve in API600 and API6D ANSI standard,with quality certified sangong valve. http://www.sangongvalve.com/gate-valve/27-flexible-wedge-gate-valve.html
Used for oil gas steam energery power plant.
SPO-Product-Brochure
The document describes the Vector SPO® Compact Flange, a compact flange sealing technology that provides significant weight and space savings over conventional flanges while ensuring leak-free sealing of critical mechanical joints. It weighs 70-80% less than a conventional flange and has been proven through extensive testing to maintain sealing integrity equally to pipe welds. The compact flange offers benefits such as reduced equipment footprint, prevention of corrosion, superior sealing ability, and maintenance-free operation. It has been widely used in oil and gas installations globally since 1989.
HT-Catalogue steel fitting for pipe ship.pdf
This document provides information about Zhengzhou Huitong Pipeline Equipment Co., LTD. It introduces Huitong as a manufacturer and supplier of pipe fittings, flanges, fasteners, and other pipeline equipment made from materials like carbon steel, stainless steel, nickel alloys, and more. It also lists Huitong's product categories and specifications and provides contact information.
Válvulas de bola - Ball Valves
Una válvula de bola, conocida también como válvula de esfera, es un mecanismo de llave de paso que sirve para regular el flujo de un fluido canalizado y se caracteriza porque el mecanismo regulador situado en el interior es una bola perforada.
A ball valve, also known as a spherical valve, is a stopcock mechanism used to regulate the flow of a piped fluid and is characterised by having a perforated ball inside as its regulating mechanism.
Introduction PRTBRD
Pramukhraj Traders is an Indian company established 35 years ago that manufactures precision industrial rubber products using extrusion and molding processes. They produce a variety of rubber products including diaphragms, O-rings, oil seals, gaskets, anti-vibration mounts, bellows, wheels, and mechanical power transmission couplings. They aim to serve industries across India and overseas by offering customized rubber solutions and high quality products according to customer specifications and standards.
Thomson BSA Accessories
The document describes various accessories for ball screw assemblies, including flexible couplings, three-piece couplers, grease options, wiper kits, and standard mounting flanges. It provides details on part numbers, specifications, and applications for each type of accessory. Flexible couplings come in various sizes and materials to allow for misalignment. Grease options include specialized gels for different temperature ranges and environments. Wiper kits help spread lubricant and prevent contamination. Mounting flanges are designed for easy installation on bronze nuts and supenuts.
Thomson bsa accessoriestechnicalinfo_catalog
The document describes various accessories for ball screw assemblies, including flexible couplings, three-piece couplers, grease options, wiper kits, and standard mounting flanges. It provides details on part numbers, specifications, and applications for each type of accessory. Flexible couplings come in various sizes and materials to provide misalignment capability and withstand hostile environments. Grease options include specialized gels for different temperature ranges and cleanliness requirements. Wiper kits help spread lubricant and prevent contamination, with brush or snap-in styles available. Mounting flanges are designed for easy attachment to bronze nuts or supenuts.
Ancillaries
This document describes various ancillary products used for securing metal jacketing around insulated pipelines, including banding, wingseals, springs, toggles, tying wire, screws, rivets, and other miscellaneous items. BS Stainless supplies a complete range of these products manufactured from materials like stainless steel, aluminum, and zinc to securely insulate pipelines transporting fluids like oil, gas, water and steam. The company offers innovative designs that improve strength and reduce material usage for certain items.
Lintech catalog
This document provides an overview and technical specifications for various linear motion and positioning components manufactured by LINTECH. It describes their standard product offerings which include precision shafting, shaft supports, shaft assemblies, linear bearings, ball screw assemblies, and standard positioning systems. It also discusses their ability to customize products and designs for specialized customer needs, including multi-axis systems and custom mechanical positioning systems.
Steel Flexible Couplings
The document provides information about pump motor shaft drive couplings manufactured by HIC International Co Inc in India. It includes technical specifications, manufacturing details, and application information for various flexible coupling product lines including jaw spider couplings, spacer couplings, rubber tyre couplings, and motor couplings. Product lines are detailed by size, torque rating, bore size, dimensions, material specifications, and conformance to various quality standards.
Trutek Fasteners Private Limited, Noida, Lightweight Anchors
Manufacturer and Supplier of Coach Screw and Plug, Concrete Screws, Torx Driver Bit, Nylon Frame Anchors, Heavy Duty Projecting Bolt, Heavy Duty Anchor Countersunk.
Similar to Process Piping Expansion Joints (20)
General Metals & Polymers, Mumbai , Cutless Rubber Bearings
General Metals & Polymers, Mumbai , Cutless Rubber Bearings
Trutek Fasteners Private Limited, Noida, Lightweight Anchors
Trutek Fasteners Private Limited, Noida, Lightweight Anchors
Recently uploaded
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
DfMAy 2024 - key insights and contributions
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Hierarchical Digital Twin of a Naval Power System
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Low power architecture of logic gates using adiabatic techniques
The growing significance of portable systems to limit power consumption in ultra-large-scale-integration chips of very high density, has recently led to rapid and inventive progresses in low-power design. The most effective technique is adiabatic logic circuit design in energy-efficient hardware. This paper presents two adiabatic approaches for the design of low power circuits, modified positive feedback adiabatic logic (modified PFAL) and the other is direct current diode based positive feedback adiabatic logic (DC-DB PFAL). Logic gates are the preliminary components in any digital circuit design. By improving the performance of basic gates, one can improvise the whole system performance. In this paper proposed circuit design of the low power architecture of OR/NOR, AND/NAND, and XOR/XNOR gates are presented using the said approaches and their results are analyzed for powerdissipation, delay, power-delay-product and rise time and compared with the other adiabatic techniques along with the conventional complementary metal oxide semiconductor (CMOS) designs reported in the literature. It has been found that the designs with DC-DB PFAL technique outperform with the percentage improvement of 65% for NOR gate and 7% for NAND gate and 34% for XNOR gate over the modified PFAL techniques at 10 MHz respectively.
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Kinematics 11th jpp- 01. ( Solved ) unacademy namo kaul on 14th may...
在线办理(ANU毕业证书)澳洲国立大学毕业证录取通知书一模一样
学校原件一模一样【微信：741003700 】《(ANU毕业证书)澳洲国立大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
原版制作(unimelb毕业证书)墨尔本大学毕业证Offer一模一样
学校原件一模一样【微信：741003700 】《(unimelb毕业证书)墨尔本大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
Dynamic Programming
Backtracking
Techniques for Graphs
Branch and Bound
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Horizon Generation
一比一原版(IIT毕业证)伊利诺伊理工大学毕业证成绩单专业办理
IIT毕业证原版定制【微信：176555708】【伊利诺伊理工大学毕业证成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
学历顾问：微信：176555708
Recently uploaded (20)
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
Low power architecture of logic gates using adiabatic techniques
Low power architecture of logic gates using adiabatic techniques
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
Process Piping Expansion Joints
- 1. Customer: Date: Job/Project: Ref/Tag: 5100U-0000-3.16 Style 5100U Universal Rubber Expansion Joint © 2016 General Rubber Corporation, All Rights Reserved Optional Control Units Outer Nuts (W/B) Spherical Washer, Inner Bare (SW/B) Spherical Washer (SW/SW) Integral Ring, Spherical Washer (INT-SW/SW) Integral Ring, Spherical Washer (INT-SW/B) Integral Ring (INT-W/B) Bill of Materials Retaining Ring Gusset Rods Nuts Spherical Washers Metal Reinforcement Textile Reinforcement Carbon Steel Stainless Steel Carbon Steel Stainless Steel ASTM A193 B7 Alloy Steel ASTM A193 B8M 316 SS ASTM A194 2H Steel ASTM A194 8M 316 SS Stainless Steel High Tensile Steel Tire Cord Hot DippedGalvanized Plain Hot DippedGalvanized Plain Hot DippedGalvanized Plain Hot DippedGalvanized Plain Plain Rubber Embedded RFL Coating ITEM MATERIAL FINISH No Control Units general-rubber.com 800-233-6294 Contact General Rubber Corporation for full product specifications, Warnings and installation instructions. Shown with Control Unit SW/B Mating Flange (by others) ∅ ID (DN) Gusset Rod Tube Retaining Ring (segmented) Reinforcement Cover Section Detail Tube Cover Tire Cord: Polyester Kevlar® Pure Gum º F [º C] 180 [82] 180 [82] Neoprene º F [º C] 225 [107] 225 [107] Butyl º F [º C] 250 [121] 300 [149] Nitrile (Buna-N) º F [º C] 210 [99] 210 [99] EPDM º F [º C] 250 [121] 350 [177] Viton® (FKM) º F [º C] 250 [121] 400 [204] Maximum Temperature rating based on lowest temperature material selected. EPDM or Butyl w/Polyester Tire Cord rated 300°F (149°C) for Air Service up to 25 psig (1.7 barg) Nuts F/F Available in standard or custom face-to-face dimensions, multiple arches or custom offset arrangements. PRESSURE WEIGHTPRESSURE WEIGHTPRESSURE WEIGHT Quantity ID (DN) F/F Axial Compression Torsional Lateral Flange Drilling Pressure Vacuum Axial Extension Angular (º) Operational Parameters (customer specified) Size M.S. Jacobs & Associates, Inc. Pittsburgh, PA USA www.msjacobs.com (800) 348-0089