Toggle clamp is a product using locking function guaranteed at the dead point of a linkage system of links and pins. It is very convenient to fix workpiece with one-touch when machining constant thickness of workpiece. Toggle clamp’s structure and operating method are simple and it provides high clamping force. Toggle clamp is widely used due to its convenience.
Toyota 60 5fd25 forklift service repair manualfjjskekdmnsme
This manual provides service procedures for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series from August 1986 to August 1989. It covers models with 4P, 4Y, 2J, 1Z, and 7DZ engines. The manual lists the vehicle models and their payloads ranging from 1 to 3 tons. It provides exterior views, abbreviations, operational tips, standard bolt tightening torques, and other reference information to assist with servicing these forklift models. Technicians are instructed to also refer to additional repair manuals for the mounted engines.
Toyota 02 5fg18 forklift service repair manualfjskemdme
This manual provides service procedures for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series from August 1986 to August 1989. It covers models with 4P, 4Y, 2J, 1Z, and 7DZ gasoline and diesel engines. The document lists the vehicle models and specifications, provides exterior views of some models, and references repair manuals for the mounted engines. It also includes information on frame numbers, maintenance schedules, lubrication charts, and specifications for standard bolt tightening torques and high pressure hose fittings.
Toyota 02 5fg15 forklift service repair manualfjjskekdm
This manual provides service procedures for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series from August 1986 to August 1989. It covers models with 4P, 4Y, 2J, 1Z, and 7Z engines. The document lists the vehicle models and specifications, along with reference repair manuals for the mounted engines. It provides information on exterior views, abbreviations, operational tips, standard bolt tightening torques, high pressure hose fitting torques, frame numbers, wire rope suspension angles, component weights, lubrication charts, and periodic maintenance procedures. Any updates to models or service information after August 1989 will be in Toyota Industrial Vehicles' Parts & Service News.
Toyota 02 5fg23 forklift service repair manualfjsjekkdmnem
This manual provides service procedures for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series from August 1986 to August 1989. It covers models with 4P, 4Y, 2J, 1Z, and 7DZ gasoline and diesel engines. The manual includes exterior views of the vehicles, listings of vehicle models and specifications, standard bolt tightening torques, maintenance schedules, and references to separate engine repair manuals. Minor changes were made to the models in September 1986 and September 1989, which are addressed.
Toyota 02 5fd23 forklift service repair manualfjkskedmme
This manual provides service procedures for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series from August 1986 to August 1989. It covers models with 4P, 4Y, 2J, 1Z, and 7Z engines. The document lists the vehicle models and specifications, along with reference repair manuals for the mounted engines. It provides information on exterior views, abbreviations, operational tips, standard bolt tightening torques, high pressure hose fitting torques, frame numbers, wire rope suspension angles, component weights, lubrication charts, and periodic maintenance procedures. Any updates to models or service information after August 1989 will be in Toyota Industrial Vehicles' Parts & Service News.
Toyota 60 5fd23 forklift service repair manualfjjsekkmdmes
This document provides an overview and service manual for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series from August 1986 to August 1989. It covers the exterior views, vehicle listings, abbreviations, operational tips, standard bolt tightening torques, frame numbers, and other reference information for servicing these models. The manual instructs technicians to use genuine Toyota parts and special service tools. It also provides lubrication charts and lists periodic maintenance procedures.
Toyota 2 sdk6 skid steer loader service repair manualdfjjkskemsme
This repair manual provides instructions for repairing Toyoto skid steer loaders models 2SGK6, 2SDK6, 2SDK7, and 2SDK8. It covers inspection, adjustment, and repair of the engine, chassis, and materials handling systems. Technicians are encouraged to thoroughly familiarize themselves with the manual in order to properly service and maintain the loaders. The manual contains the latest information as of March 1986 and technicians should consult subsequent service bulletins for any updates. Relevant repair manuals are also listed for reference. The document then provides sections on vehicle specifications, maintenance procedures, and repair instructions for the various components.
Toyota 02 5fd30 forklift service repair manualfjsjjekdkme
This manual provides service procedures for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series from August 1986 to August 1989. It covers models with 4P, 4Y, 2J, 1Z, and 7Z gasoline and diesel engines. The manual includes exterior views, vehicle listings, abbreviations, operational tips, standard bolt tightening torques, high pressure hose fitting torques, frame numbers, wire rope suspension information, component weights, lubrication charts, periodic maintenance schedules, and replacement part information. Reference manuals for mounted engine repair are also listed. The document provides technical information for servicing specified Toyota forklift models.
Toyota 60 5fd25 forklift service repair manualfjjskekdmnsme
This manual provides service procedures for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series from August 1986 to August 1989. It covers models with 4P, 4Y, 2J, 1Z, and 7DZ engines. The manual lists the vehicle models and their payloads ranging from 1 to 3 tons. It provides exterior views, abbreviations, operational tips, standard bolt tightening torques, and other reference information to assist with servicing these forklift models. Technicians are instructed to also refer to additional repair manuals for the mounted engines.
Toyota 02 5fg18 forklift service repair manualfjskemdme
This manual provides service procedures for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series from August 1986 to August 1989. It covers models with 4P, 4Y, 2J, 1Z, and 7DZ gasoline and diesel engines. The document lists the vehicle models and specifications, provides exterior views of some models, and references repair manuals for the mounted engines. It also includes information on frame numbers, maintenance schedules, lubrication charts, and specifications for standard bolt tightening torques and high pressure hose fittings.
Toyota 02 5fg15 forklift service repair manualfjjskekdm
This manual provides service procedures for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series from August 1986 to August 1989. It covers models with 4P, 4Y, 2J, 1Z, and 7Z engines. The document lists the vehicle models and specifications, along with reference repair manuals for the mounted engines. It provides information on exterior views, abbreviations, operational tips, standard bolt tightening torques, high pressure hose fitting torques, frame numbers, wire rope suspension angles, component weights, lubrication charts, and periodic maintenance procedures. Any updates to models or service information after August 1989 will be in Toyota Industrial Vehicles' Parts & Service News.
Toyota 02 5fg23 forklift service repair manualfjsjekkdmnem
This manual provides service procedures for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series from August 1986 to August 1989. It covers models with 4P, 4Y, 2J, 1Z, and 7DZ gasoline and diesel engines. The manual includes exterior views of the vehicles, listings of vehicle models and specifications, standard bolt tightening torques, maintenance schedules, and references to separate engine repair manuals. Minor changes were made to the models in September 1986 and September 1989, which are addressed.
Toyota 02 5fd23 forklift service repair manualfjkskedmme
This manual provides service procedures for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series from August 1986 to August 1989. It covers models with 4P, 4Y, 2J, 1Z, and 7Z engines. The document lists the vehicle models and specifications, along with reference repair manuals for the mounted engines. It provides information on exterior views, abbreviations, operational tips, standard bolt tightening torques, high pressure hose fitting torques, frame numbers, wire rope suspension angles, component weights, lubrication charts, and periodic maintenance procedures. Any updates to models or service information after August 1989 will be in Toyota Industrial Vehicles' Parts & Service News.
Toyota 60 5fd23 forklift service repair manualfjjsekkmdmes
This document provides an overview and service manual for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series from August 1986 to August 1989. It covers the exterior views, vehicle listings, abbreviations, operational tips, standard bolt tightening torques, frame numbers, and other reference information for servicing these models. The manual instructs technicians to use genuine Toyota parts and special service tools. It also provides lubrication charts and lists periodic maintenance procedures.
Toyota 2 sdk6 skid steer loader service repair manualdfjjkskemsme
This repair manual provides instructions for repairing Toyoto skid steer loaders models 2SGK6, 2SDK6, 2SDK7, and 2SDK8. It covers inspection, adjustment, and repair of the engine, chassis, and materials handling systems. Technicians are encouraged to thoroughly familiarize themselves with the manual in order to properly service and maintain the loaders. The manual contains the latest information as of March 1986 and technicians should consult subsequent service bulletins for any updates. Relevant repair manuals are also listed for reference. The document then provides sections on vehicle specifications, maintenance procedures, and repair instructions for the various components.
Toyota 02 5fd30 forklift service repair manualfjsjjekdkme
This manual provides service procedures for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series from August 1986 to August 1989. It covers models with 4P, 4Y, 2J, 1Z, and 7Z gasoline and diesel engines. The manual includes exterior views, vehicle listings, abbreviations, operational tips, standard bolt tightening torques, high pressure hose fitting torques, frame numbers, wire rope suspension information, component weights, lubrication charts, periodic maintenance schedules, and replacement part information. Reference manuals for mounted engine repair are also listed. The document provides technical information for servicing specified Toyota forklift models.
Toyota 5 fgc23 forklift service repair manualjsemm fvdcf
This manual provides service procedures for the TOYOTA FORKLIFT 5FGC/5FDC18-30 Series from August 1986. It covers topics like vehicle exterior views, models, abbreviations, standard torque specifications, lubrication, maintenance, and repair of general components like the frame, axles, steering, brakes and body. Reference manuals are also listed for servicing the mounted engine. The document provides essential information for technicians to properly service corresponding forklift models.
Toyota 02 6 fdu18 forklift service repair manualfjskekazswdmme
This document provides an overview and instructions for servicing the Toyota Forklift 6FGU15-30. It begins with an exterior view of the forklift and identification of its frame number and model. It then outlines how to use the manual, including terminology, abbreviations, and operational tips. The bulk of the document provides tables of standard bolt tightening torques, lubrication charts, and a periodic maintenance schedule. It concludes with notes on precoat bolts and high pressure hose fittings. In summary, this manual is a reference for servicing Toyota forklifts, including identification information, operational guidance, maintenance schedules, and technical specifications.
Toyota 62 6 fdu30 forklift service repair manualfjsjjdkemmde
This document provides an overview and instructions for servicing the Toyota Forklift 6FGU15-30. It begins with an exterior view of the forklift and identification of its frame number and model. It then outlines how to use the manual, including terminology, abbreviations, and operational tips. The bulk of the document provides tables of standard bolt tightening torques, lubrication charts, and a periodic maintenance schedule. It concludes with notes on precoat bolts and high pressure hose fittings. In summary, this manual is a reference for servicing Toyota forklifts, including identification information, operational guidance, maintenance schedules, and technical specifications.
Toyota 42 6 fgu18 forklift service repair manualfjjskdmnenemm
This document provides an overview manual for servicing the Toyota Forklift 6FGU15-30. It begins with a foreword stating the manual covers service procedures for the specified forklift models as of July 1995. It notes some discrepancies may exist due to design changes. It also lists repair manuals for the mounted engines that should be referenced along with this manual. The document then provides sections on general information, components, maintenance procedures, and periodic replacement of parts. It aims to provide quick and correct servicing of the corresponding forklift models.
Toyota 42 6 fgu20 forklift service repair manualfjjskekdmmme
This document provides an overview and instructions for servicing the Toyota Forklift 6FGU15-30. It begins with an exterior view of the forklift and identification of its frame number and model. It then outlines how to use the manual, including terminology, abbreviations, and operational tips. The bulk of the document provides tables of standard bolt tightening torques, lubrication charts, and a periodic maintenance schedule. It concludes with notes on precoat bolts, high pressure hose fittings, wire rope suspension angles, and recommended lubricant quantities and types.
Toyota 42 6 fgu15 forklift service repair manualjfjskekdhnejd
This document provides an overview and instructions for servicing the Toyota Forklift 6FGU15-30. It begins with an exterior view of the forklift and identification of its frame number and model. It then outlines how to use the manual, including terminology, abbreviations, and operational tips. The bulk of the document provides tables of standard bolt tightening torques, lubrication charts, and a periodic maintenance schedule. It concludes by listing repair manuals for the mounted engine models.
Toyota 62 6 fdu25 forklift service repair manualfjsekkxszdmmem
This document provides an overview and instructions for servicing the Toyota Forklift 6FGU15-30. It begins with an exterior view of the forklift and identification of its frame number and model. It then outlines how to use the manual, including terminology, abbreviations, and operational tips. The bulk of the document provides tables of standard bolt tightening torques, lubrication charts, and a periodic maintenance schedule. It concludes with notes on precoat bolts and high pressure hose fittings. In summary, this manual is a reference for servicing Toyota forklifts, including identification information, operational guidance, maintenance schedules, and technical specifications.
Toyota 42 6 fgu25 forklift service repair manualfjkskekxsdcmdmme
This document provides an overview and instructions for servicing the Toyota Forklift 6FGU15-30. It begins with an exterior view of the forklift and identification of its frame number and model. It then outlines how to use the manual, including terminology, abbreviations, and operational tips. The bulk of the document provides tables of standard bolt tightening torques, lubrication charts, and a periodic maintenance schedule. It concludes by listing repair manuals for the mounted engine models.
Toyota 62 6 fdu20 forklift service repair manualfhsejkdkme
This document provides an overview and instructions for servicing the Toyota Forklift 6FGU15-30. It begins with an exterior view of the forklift and identification of its frame number and model. It then outlines how to use the manual, including terminology, abbreviations, and operational tips. The next sections provide standard bolt tightening torques, precoat bolt instructions, hose fitting torques, wire rope suspension angles and load capacities. It concludes with lubrication charts and schedules for periodic maintenance and replacement of parts.
Toyota 52 6 fgu20 forklift service repair manualfjjskekmdmme
This document provides an overview and instructions for servicing the Toyota Forklift 6FGU15-30. It begins with an exterior view of the forklift and identification of its frame number and model. It then outlines how to use the manual, including terminology, abbreviations, and operational tips. The next sections provide standard bolt tightening torques, precoat bolt instructions, hose fitting torques, wire rope suspension angles and load capacities. It concludes with lubrication charts and schedules for periodic maintenance and replacement of parts.
Toyota 02 6 fgu30 forklift service repair manualfhhsjdkmem
This document provides an overview and instructions for servicing the Toyota Forklift 6FGU15-30. It begins with an exterior view of the forklift and identification of its frame number and model. It then outlines how to use the manual, including terminology, abbreviations, and operational tips. The next sections provide standard bolt tightening torques, precoat bolt instructions, hose fitting torques, wire rope suspension angles and load capacities. It concludes with lubrication charts and schedules for periodic maintenance and replacement of parts.
Toyota 02-5fg30 Forklift Service Repair Manualfudjjksekkemm
This is the Highly Detailed factory service repair manual for theTOYOTA 02-5FG30 FORKLIFT, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA 02-5FG30 FORKLIFT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Clutch
Torque Converter
Transmission
Propeller Shaft
Differential
Front Axle
Rear Axle
Steering
Brake
Body
Material Handling System
Mast
Cylinder
Oil Pump
Oil Control Valve
Appendix
Wiring Diagram
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA 02-5FG30 FORKLIFT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Mc cormick xtx series (2005 2007) - xtx185 tractor service repair manualfjjskekdmmse
This document provides part numbers and descriptions for replacement components for various systems on XTX Series tractors XTX185, XTX200, and XTX215 from 2005-2007, including the engine, cooling system, hydraulic system, and other systems. The parts listed include gaskets, hoses, fittings, pumps, filters, belts, brackets, seals, and other common replacement components.
Toyota 02 5fd10 forklift service repair manualfjjskekksemmm
This document provides an overview and service manual for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series from August 1986 to August 1989. It includes exterior views of the models, listings of the vehicle models and their specifications, abbreviations, operational tips, standard bolt tightening torques, frame number identification, and maintenance procedures and schedules. Reference manuals for the mounted engine models are also listed. The manual is intended to provide technicians with information to correctly service the corresponding forklift models.
The document discusses Groz sockets and sets. It provides details on Groz socket features like the super grip profile, knurled band, chrome vanadium construction and ultra premium finish that provide enhanced performance, life and durability. It also discusses Groz ratchets and their 48 tooth gear structure, compact pear head, flat shank and other smart designs that enable enhanced transmission of torque. The document further provides pricing and details of Groz socket sets in 1/2" and 1/4" square drive sizes along with terms and conditions.
This document provides specifications for various side mounted linear guide assemblies with table tops. It includes specifications for different sized linear guides, pillow block bearings, support rails, and table tops. Key specifications listed include part numbers, dimensions, load ratings, and material information. The document explains that Thomson linear guides require specifying the system length as a suffix to the standard part number.
This document provides specifications for various side mounted linear guide assemblies with table tops. It includes specifications for different sized linear guides, pillow block bearings, support rails, and table tops. Key specifications listed include part numbers, dimensions, load ratings, and material information.
Caterpillar 3208 Diesel Engine Service Manual Copy One [PDF, ENG, 154 MB].pdfEguima Guima
This document provides standard torque specifications for various types of fasteners including metric and inch nuts and bolts, taperlock studs, O-ring face seal fittings, hydraulic line fittings, air conditioning fittings, and tapered pipe thread fittings. It also includes instructions for properly installing different fitting types such as tube fittings, hose clamps, and O-ring seals.
This document provides a list of parts and components for a LF230 core drill assembly with serial numbers from 2007-193 and up. It includes over 50 line items with part numbers, names, quantities and service life indicators for components such as the base frame module, mast assembly, winch, hydraulic cylinder, and cooler group. Spare parts and recommended service life indicators are provided for maintenance planning.
The document contains specifications for various continuously supported linear guide assemblies with table tops, including dimensions, load ratings, and part numbers. It describes double linear guide assemblies with either 4 pillow blocks or 2 twin pillow blocks and a table top for mounting workpieces. Component materials and lubrication access options are also noted.
The document contains specifications for various continuously supported linear guide assemblies with part numbers beginning with 1CC. It includes dimensions, load ratings, and component details for double linear guides with either 4 pillow blocks or 2 twin pillow blocks and one of two sizes of mounting table tops.
Toyota 5 fgc23 forklift service repair manualjsemm fvdcf
This manual provides service procedures for the TOYOTA FORKLIFT 5FGC/5FDC18-30 Series from August 1986. It covers topics like vehicle exterior views, models, abbreviations, standard torque specifications, lubrication, maintenance, and repair of general components like the frame, axles, steering, brakes and body. Reference manuals are also listed for servicing the mounted engine. The document provides essential information for technicians to properly service corresponding forklift models.
Toyota 02 6 fdu18 forklift service repair manualfjskekazswdmme
This document provides an overview and instructions for servicing the Toyota Forklift 6FGU15-30. It begins with an exterior view of the forklift and identification of its frame number and model. It then outlines how to use the manual, including terminology, abbreviations, and operational tips. The bulk of the document provides tables of standard bolt tightening torques, lubrication charts, and a periodic maintenance schedule. It concludes with notes on precoat bolts and high pressure hose fittings. In summary, this manual is a reference for servicing Toyota forklifts, including identification information, operational guidance, maintenance schedules, and technical specifications.
Toyota 62 6 fdu30 forklift service repair manualfjsjjdkemmde
This document provides an overview and instructions for servicing the Toyota Forklift 6FGU15-30. It begins with an exterior view of the forklift and identification of its frame number and model. It then outlines how to use the manual, including terminology, abbreviations, and operational tips. The bulk of the document provides tables of standard bolt tightening torques, lubrication charts, and a periodic maintenance schedule. It concludes with notes on precoat bolts and high pressure hose fittings. In summary, this manual is a reference for servicing Toyota forklifts, including identification information, operational guidance, maintenance schedules, and technical specifications.
Toyota 42 6 fgu18 forklift service repair manualfjjskdmnenemm
This document provides an overview manual for servicing the Toyota Forklift 6FGU15-30. It begins with a foreword stating the manual covers service procedures for the specified forklift models as of July 1995. It notes some discrepancies may exist due to design changes. It also lists repair manuals for the mounted engines that should be referenced along with this manual. The document then provides sections on general information, components, maintenance procedures, and periodic replacement of parts. It aims to provide quick and correct servicing of the corresponding forklift models.
Toyota 42 6 fgu20 forklift service repair manualfjjskekdmmme
This document provides an overview and instructions for servicing the Toyota Forklift 6FGU15-30. It begins with an exterior view of the forklift and identification of its frame number and model. It then outlines how to use the manual, including terminology, abbreviations, and operational tips. The bulk of the document provides tables of standard bolt tightening torques, lubrication charts, and a periodic maintenance schedule. It concludes with notes on precoat bolts, high pressure hose fittings, wire rope suspension angles, and recommended lubricant quantities and types.
Toyota 42 6 fgu15 forklift service repair manualjfjskekdhnejd
This document provides an overview and instructions for servicing the Toyota Forklift 6FGU15-30. It begins with an exterior view of the forklift and identification of its frame number and model. It then outlines how to use the manual, including terminology, abbreviations, and operational tips. The bulk of the document provides tables of standard bolt tightening torques, lubrication charts, and a periodic maintenance schedule. It concludes by listing repair manuals for the mounted engine models.
Toyota 62 6 fdu25 forklift service repair manualfjsekkxszdmmem
This document provides an overview and instructions for servicing the Toyota Forklift 6FGU15-30. It begins with an exterior view of the forklift and identification of its frame number and model. It then outlines how to use the manual, including terminology, abbreviations, and operational tips. The bulk of the document provides tables of standard bolt tightening torques, lubrication charts, and a periodic maintenance schedule. It concludes with notes on precoat bolts and high pressure hose fittings. In summary, this manual is a reference for servicing Toyota forklifts, including identification information, operational guidance, maintenance schedules, and technical specifications.
Toyota 42 6 fgu25 forklift service repair manualfjkskekxsdcmdmme
This document provides an overview and instructions for servicing the Toyota Forklift 6FGU15-30. It begins with an exterior view of the forklift and identification of its frame number and model. It then outlines how to use the manual, including terminology, abbreviations, and operational tips. The bulk of the document provides tables of standard bolt tightening torques, lubrication charts, and a periodic maintenance schedule. It concludes by listing repair manuals for the mounted engine models.
Toyota 62 6 fdu20 forklift service repair manualfhsejkdkme
This document provides an overview and instructions for servicing the Toyota Forklift 6FGU15-30. It begins with an exterior view of the forklift and identification of its frame number and model. It then outlines how to use the manual, including terminology, abbreviations, and operational tips. The next sections provide standard bolt tightening torques, precoat bolt instructions, hose fitting torques, wire rope suspension angles and load capacities. It concludes with lubrication charts and schedules for periodic maintenance and replacement of parts.
Toyota 52 6 fgu20 forklift service repair manualfjjskekmdmme
This document provides an overview and instructions for servicing the Toyota Forklift 6FGU15-30. It begins with an exterior view of the forklift and identification of its frame number and model. It then outlines how to use the manual, including terminology, abbreviations, and operational tips. The next sections provide standard bolt tightening torques, precoat bolt instructions, hose fitting torques, wire rope suspension angles and load capacities. It concludes with lubrication charts and schedules for periodic maintenance and replacement of parts.
Toyota 02 6 fgu30 forklift service repair manualfhhsjdkmem
This document provides an overview and instructions for servicing the Toyota Forklift 6FGU15-30. It begins with an exterior view of the forklift and identification of its frame number and model. It then outlines how to use the manual, including terminology, abbreviations, and operational tips. The next sections provide standard bolt tightening torques, precoat bolt instructions, hose fitting torques, wire rope suspension angles and load capacities. It concludes with lubrication charts and schedules for periodic maintenance and replacement of parts.
Toyota 02-5fg30 Forklift Service Repair Manualfudjjksekkemm
This is the Highly Detailed factory service repair manual for theTOYOTA 02-5FG30 FORKLIFT, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA 02-5FG30 FORKLIFT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Clutch
Torque Converter
Transmission
Propeller Shaft
Differential
Front Axle
Rear Axle
Steering
Brake
Body
Material Handling System
Mast
Cylinder
Oil Pump
Oil Control Valve
Appendix
Wiring Diagram
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA 02-5FG30 FORKLIFT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Mc cormick xtx series (2005 2007) - xtx185 tractor service repair manualfjjskekdmmse
This document provides part numbers and descriptions for replacement components for various systems on XTX Series tractors XTX185, XTX200, and XTX215 from 2005-2007, including the engine, cooling system, hydraulic system, and other systems. The parts listed include gaskets, hoses, fittings, pumps, filters, belts, brackets, seals, and other common replacement components.
Toyota 02 5fd10 forklift service repair manualfjjskekksemmm
This document provides an overview and service manual for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series from August 1986 to August 1989. It includes exterior views of the models, listings of the vehicle models and their specifications, abbreviations, operational tips, standard bolt tightening torques, frame number identification, and maintenance procedures and schedules. Reference manuals for the mounted engine models are also listed. The manual is intended to provide technicians with information to correctly service the corresponding forklift models.
The document discusses Groz sockets and sets. It provides details on Groz socket features like the super grip profile, knurled band, chrome vanadium construction and ultra premium finish that provide enhanced performance, life and durability. It also discusses Groz ratchets and their 48 tooth gear structure, compact pear head, flat shank and other smart designs that enable enhanced transmission of torque. The document further provides pricing and details of Groz socket sets in 1/2" and 1/4" square drive sizes along with terms and conditions.
This document provides specifications for various side mounted linear guide assemblies with table tops. It includes specifications for different sized linear guides, pillow block bearings, support rails, and table tops. Key specifications listed include part numbers, dimensions, load ratings, and material information. The document explains that Thomson linear guides require specifying the system length as a suffix to the standard part number.
This document provides specifications for various side mounted linear guide assemblies with table tops. It includes specifications for different sized linear guides, pillow block bearings, support rails, and table tops. Key specifications listed include part numbers, dimensions, load ratings, and material information.
Caterpillar 3208 Diesel Engine Service Manual Copy One [PDF, ENG, 154 MB].pdfEguima Guima
This document provides standard torque specifications for various types of fasteners including metric and inch nuts and bolts, taperlock studs, O-ring face seal fittings, hydraulic line fittings, air conditioning fittings, and tapered pipe thread fittings. It also includes instructions for properly installing different fitting types such as tube fittings, hose clamps, and O-ring seals.
This document provides a list of parts and components for a LF230 core drill assembly with serial numbers from 2007-193 and up. It includes over 50 line items with part numbers, names, quantities and service life indicators for components such as the base frame module, mast assembly, winch, hydraulic cylinder, and cooler group. Spare parts and recommended service life indicators are provided for maintenance planning.
The document contains specifications for various continuously supported linear guide assemblies with table tops, including dimensions, load ratings, and part numbers. It describes double linear guide assemblies with either 4 pillow blocks or 2 twin pillow blocks and a table top for mounting workpieces. Component materials and lubrication access options are also noted.
The document contains specifications for various continuously supported linear guide assemblies with part numbers beginning with 1CC. It includes dimensions, load ratings, and component details for double linear guides with either 4 pillow blocks or 2 twin pillow blocks and one of two sizes of mounting table tops.
JCB JS145LC TRACKED EXCAVATOR Parts Catalogue Manual (Serial Number 01600011...dsz422528
This document provides a parts catalog for hydraulic hoses and piping for an excavator model. It includes multiple circuit diagrams with lists of parts numbered for each component. Circuits listed include pumps, valves, filters, cylinders, and manifolds. Parts are identified by number, description, and quantity required for each item.
JCB JS145LC TRACKED EXCAVATOR Parts Catalogue Manual (Serial Number 01600011...f8usuejdkdm3e
This document provides a parts catalog for hydraulic hoses and piping for an excavator model. It includes multiple circuit diagrams with lists of parts numbered for each component. Circuits listed include pumps, filters, controls, boom functions and more. Parts are identified by number, description, and quantity for each item in the diagrams.
JCB JS145LC TRACKED EXCAVATOR Parts Catalogue Manual (Serial Number 01600011...f8usejdkdmmd
This document provides a parts catalog for hydraulic hoses and piping for an excavator model. It includes multiple circuit diagrams with lists of parts numbered for each component. Circuits listed include pumps, filters, controls, boom functions and more. Parts are identified by number, description and quantity for each item in the diagrams.
JCB JS145LC TRACKED EXCAVATOR Parts Catalogue Manual (Serial Number 01600011...kdmdmsmmdm
This document provides a parts catalog for hydraulic hoses and piping for an excavator model. It includes multiple circuit diagrams with lists of parts numbered for each component. Circuits listed include pumps, filters, controls, boom functions, dipper/bucket functions and more. Each item includes the part number, description, usage code and quantity.
Dynacorp manufactures flange mounted brakes in various sizes from 3" to 10" for stopping applications. The document provides specifications, drawings, dimensions, parts lists, and ordering information for each brake model. It describes the Dynacorp 303, 304, 305, and 308 brake models, including their static torque ratings, recommended controls, and replacement parts.
This document provides information on type FL electromagnetic flange mounted clutches, including:
- An overview of how the FL clutches couple two parallel shafts using an armature hub mounted to one shaft and a field assembly mounted perpendicular to the input shaft.
- Dimensions, specifications, and ordering information for various FL clutch models ranging from size 08 to 42.
This document provides wiring diagrams and connector information for various harness assemblies for a Caterpillar heavy equipment engine. It includes tables that list the wire colors, positions and part numbers for connectors in different harness assemblies. Symbols used in the diagrams are explained at the beginning.
Thomson Linear RoundRail 1VC Continuously Supported SpecsElectromate
This document provides specifications for various FluoroNyliner linear guide systems with double continuous support, including:
- Dimensions and part numbers for linear guides, pillow blocks, shaft support rails, and table tops in various sizes
- Maximum operating parameters for the FluoroNyliner bearings
- Benefits of the linear guide systems which provide rigidity for continuously supported applications
- Information on specifying and ordering replacement parts
This document provides specifications for various FluoroNyliner linear guide systems with double continuous support, including:
- Dimensions and part numbers for linear guides, pillow blocks, shaft support rails, and table tops in various sizes
- Maximum operating parameters for the FluoroNyliner bearings
- Benefits of the linear guide systems which provide rigidity for continuously supported applications
- Information on specifying and ordering replacement parts
A Step-by-Step Guide for Tube bender Replacement PartsDavidUlrich25
Navigate the world of tube bender replacement parts with ease using our comprehensive step-by-step guide. Discover how to identify, select, and install the right parts to keep your tube bender operating at its best. Unlock the secrets to maintaining efficiency and accuracy in your bending processes with expert insights and practical instructions. Whether you're a DIY enthusiast or a professional, this guide is your essential companion for seamless tube bender maintenance and optimization.
For more visit here-https://www.benderparts.com/
This document provides information on clutch-brake modules, including replacement parts. It lists specifications for various models of open drip proof clutch-brake, clutch, and brake modules. These models have torque ratings ranging from 8 to 16 lb-in, operate at speeds up to 3600 RPM, and are available for 24 or 90 volt systems. The document also includes an exploded view diagram and lists replacement parts by item number, description, and corresponding module model.
This document provides parts information for the hydraulic systems of a 1020 grain header with serial numbers between JJC0215001 and JJC0227000. It includes pictorial indexes and part listings for the reel drive, reel lift, and reel fore and aft adjustment hydraulic systems. Parts are identified by name, number, quantity and description. Diagrams show the layout and components of the different hydraulic circuits.
Korean automatic & semi automatic door - cortech co.,Ltd.Onplus
Korean automatic door, Korean semi automatic door, Korean automatic door sliding door, Korean automatic swing door operator, Korean semi automatic sliding door
Korean bamboo salt, Korean bamboo salt toothpaste, Korean bamboo salt soap, By developing Miracle Capsule, an immune health functional food that has significantly improved the efficacy of bamboo salt, the company has squarely in its sights the children's atopic natural food market. Further, the company continues with research and development of health foods with health promotion and anticancer effects such as medicinal soy sauce, sari soy sauce (made from fermented black soybean), and sulfur duck. Bamboo salt is a 100% natural food with no additives.
SPES produces several hair and skincare brands including HAU, Derma, Anti-Aging, Phyto Derma, and Snow Ampoule. The document discusses key ingredients and benefits of various products within these brands. It provides details on Snow Fungus extract in HAU products and how it supplies nutrients for hair health. Clinical tests show HAU hair packs improve hair shine, volume and elasticity. Product instructions and testimonials are also included.
Korean Fire Effect Equipment - HANSOL FX CO.,LTD.Onplus
Hansol FX Co., Ltd. is the only manufacturer of flame effect system in Korea. We`ve developed and selling a various ready-made items, including a flame director, bubble, snow, CO2, confetti, torch, torch, and stage lift. Besides, We are also producing all special effects and stage production devices to meet our customers' needs.
Hansolfx secures business competitiveness and service differentiation by improving overall quality about standards and requirements applied at the site, and overall management and operation. Standard authentication and establishment of organic cooperation system with domestic and foreign research institutes and other institutes for continuous management of service that Hansol FX pursuing have improved customer satisfaction, contributing to the long-term growth and development of the industry.
DSE, a specialized company in metal bearing for marine engines and industrial plants, enters the global market.
It has grown from manufacturing Sulzer Fuel Exhaust Pump Bearing into a professional metal-bearing manufacturer in shipbuilding engines, power generation facilities, and various plants.
DSE's metal bearing has strong compressive strength that withstands high loads, low friction coefficient, excellent thermal conductivity. It is a wear-resistant bearing with improved corrosion resistance.
Products that applied DSE bearing related to shipping engines include Stern tube bearing, Intermediate shaft bearing, bushing for chain tightener, Bearing for HPS(Hydraulic power supply), guide shoe, guide strip, and Segment.
Also, DSE has been delivering metal bearings to the power plant field in partnership with large companies as Korean construction companies, including Doosan Heavy Industries & Construction, succeeded in receiving power plant orders.
SHINJIN HYDROTEC-TONNERS is specialized in manufacturing various hydraulic tools and equipment including hydraulic cylinders used throughout the industry in Korea, and now trying to enter the global market.
It manufactures hydraulic cylinders, SHINJIN HYDROTEC-TONNERS pump, special hydraulic tools, and hydraulic equipment widely used in construction, production, manufacturing, shipbuilding, oil, and gas industries.
This document provides information about B2K Wire Co., Ltd., including their contact information, factory locations, product offerings, and specifications. It introduces B2K as an integrated wire drawing specialist that guarantees total process control and manufactures a variety of stainless steel wires and ropes. Product lines mentioned include spring wire, cold heading wire, free machining wire, and stranding/roping wire, along with specifications for each.
This document provides information about Narae Special Vehicle Truck, including their contact information, history, products, and parts. Some key details include:
- Narae Special Vehicle Truck is located in Ulsan, Republic of Korea and produces specialty vehicles for customers in industries like logistics, advertising, and construction.
- Their products include wing body trucks, refrigeration trucks, built-in trucks, powergate trucks, and special purpose vehicles customized to customer needs.
- The document describes various models and specifications of their truck products and provides photos and part numbers for common vehicle components.
- Narae's history dates back to 2009 and details its expansion over the years through new facilities, technology investments
Korean functional textile leather & apparel dureamOnplus
We manufacture functional textiles and apparel around the world. We never stop developing new technology which offer users of our products maximum protection and comfort, performance as well as top quality. Duream invest all our resources, focusing on research and innovation to respond better to the diverse functional needs of the market.
Since we have produced many years of textile processing and metal machined ungulate, based on our technical and business experience, we have developed a range of prototypes at the request of overseas manufacturers that are currently using our abrasive products.
Korean eco friendly bamboo deck - e-deck co.,ltdOnplus
It is called "iron wood" because its strength is similar to that of iron and its hardness is to that of marble. Therefore, it is possible to maintain a stylish appearance for a long time because there is hardly any damage on the surface from stabs by climbing sticks, scratches or sharp external impacts
The biggest advantages of PROPRE’s natural neutral soap manufacturing process are its purchasing of various raw materials necessary for soap production, it has red ginseng soap, eggplant soap, peanut soap, mushroom soap, honey soap, and bamboo salt soap, at low cost, and its combining of various natural herbal ingredients, such as red ginseng, eggplant, and castanea crenata shell, to eliminate the need for chemical components. PROPRE Korean natural neutral soap products are differentiated by technology that does not degrade even when exposed to water for a long time.
With various application technology in Korea, including LED defect detection functions in Korea, ALTECH has secured welding line tracking system in Korea through incorporation of Machine Vision technology into automatic assembly technology in Korea, and improved PRESS production lines in Korea based on automatic object recognition functions, shape analysis, and defect detection technology to improve quality through AI in Korea.
Established in 1999, JPS has established a stable foundation of professional hair products, such as hair dyes, hair care, hair styling, and perm products. With 20 years of accumulated technology and expertise, the company founded an affiliated research institute in 2007 and is dedicated to R&D. As a comprehensive beauty manufacturer, it has been challenging the skin industry beyond the hair sector, with products such as body wash, hand cream and slimming balm boasting significant growth potential.
Established in 2016, UDM continuously invests in research and development, applying for or registering two to three patents each year. While most competitors manufacture ball bearings, UDM focuses on fluid bearings, which overcome the shortcomings of ball bearings using fluid between metals to minimize friction. UDM manufactures fluid bearings with carbon composite materials, which have 1,100%-better abrasion ratio than other products. Their excellent durability effectively reduces equipment maintenance costs.
We supply reliable products based on our 20 years of production and quality control know-how.
It is a product optimized for the butt fusion joint pipe, electric fusion joint pipe and ball valve which are supplied together, and we provide stable quality products.
KORINA TRADE, which began its food trade business with export to China in 2014, is carrying out various export projects for domestic food companies. As part of a trade mission through an export consortium business, KORINA TRADE is supporting small and medium-sized businesses to advance into overseas markets. The company is ISO14001 and ISO9001 certified in the field of export and additional services, and has been designated as a professional trading company.
1. 1
Total Clamping System
www.kjf.co.krKJF
㈜케이제이에프에 방문해 주신 것을 진심으로 환영합니다.
㈜케이제이에프는 토글 클램프,유압/공압 클램프를 비롯해 로타리 조인트,
부스타,워크서포트,스위블 패드,플로우 컨트롤 밸브 등 워크홀딩 시스템에
필요한 다양한 제품을 전문적으로 생산하는 업체입니다.
부산소재 본사와 서울지사를 두고 있으며 언제나 고객과 함께 고객의
입장으로 제품을 제작하는데 최선을 다하고 있습니다. 한치 앞을 내다 볼
수 없는 무한 경쟁 세계에서 국내뿐만 아니라 해외시장으로 뻗어 나가기
위해 임직원 모두가 힘을 합쳐 일하고 있습니다.
1984년에 설립된 이래30년이 넘는 시간 동안,밀링 전용 픽스쳐,용접
자동화 설비,검사구,조립 자동화 라인,반도체 조립시설,지그&픽스쳐,
가공 전용기 등에 들어가는 유압/공압 자동화 클램프 연구 개발에 앞장서서
치공구산업에 필수인 요소부품을 생산하기 위해 계속적으로
투자하고 있습니다.
표준화된 요소부품은 자동차,지그,통신기기,광학기기,섬유,농업기계,
진공장비,화학공업,항공기기,고무,조선,가정용전자기기,중전기기,원동기,
중작업용 기기,철도,식품기계 등에 매우 중요한 부분입니다.생산되는
제품의 전수 품질검사를 통해 불량률을 최소화 하고 있으며,경쟁력 있는
가격 및 정밀도나 효율성에서 자사 제품이 최고라 자부합니다.표준 클램프
제품 이외에,고객의 작업 환경에 따라 요구되는 스페셜 사양에 대해서도
신속하고 정확한 솔루션(solution)을 제공하고 있습니다.문제 해결에 대한
자문이 필요하시면 언제든지 연락바랍니다.
(주)케이제이에프는 정성을 다해 전 제품 생산에 임하고 있으며 품질향상
과 효율을 높이기 위해 불철주야 노력하고 있습니다. 애정과 관심으로
지켜봐 주시고 여러분의 성원에 보답하기 위해 최선을 다하겠습니다.
감사합니다.
KJFisamanufacturerspecializinginproductsforworkholdingsystems,includingtoggle
clamps,hydraulic/pneumaticclamps,rotaryjoints,boosters,worksupports,swivelpads
andflowcontrolvalvesetc..HeadquarteredinBusanwithabranchoffice
inSeoul,weendeavortocreateproductsmanufacturedfromthecustomer’sperspective.
Intheeraoflimitlesscompetition,theKJFteamisdedicatedtoexpandingthecompany
operationsinoverseasmarkets.
Establishedin1984,wehavebeenleadingtheresearchanddevelopmentof
hydraulic/pneumaticautomationclampsformillingfixture,weldingautomationfacility,
inspectionjig,assemblyautomationline,semiconductorassemblyfacility,Jig&fixture,
machiningcenteretc.formorethan30years,andweareinvestingcontinuously
inmanufacturingessentialpartsforthejig&fixtureindustry.
Standardizedcomponentsarecriticalpartsoftheautomotive,jig&fixture,
telecommunicationequipment,opticequipment,agriculturemachines,vacuum
equipment,chemicalindustry,aviationequipment,rubber,shipbuilding,household
electronicequipment,heavyelectricequipment,motor,heavydutyequipment,railroad
industry,grocerymachinesetc..
Weminimizedefectratethroughqualityinspectionofproducts,andasaresult,wearefully
confidentinourproductsintermsofprecision,efficiency,andprice.Inadditiontostandard
products,wealsoprovideswiftandaccuratesolutionsforcustomspecifications.Weare
standingbytoassistyouwithanyinquiriesandtroubleshooting.
KJFisfocusedceaselesslyonimprovingproductqualityandefficiency.Wewillcontinueto
exceedexpectationsonasolidfoundationofyourcontinuedinterestandsupport.
Thankyou.
CORPORATE
PROFILE
Toggle Clamps
3. Total Clamping System
3
Toggle Clamp Introduction
KJF www.kjf.co.kr
가구 가공용 목공용 신발 금형용
5. 작업의 빈도(일시적 혹은 장기 사용)
4. 작업자의 사용 위치3. 설치 및 작업상의 핸들의 위치 및 간섭
2. 설치 부착면의 크기와 형태
토글 클램프 선정시 고려할 사항
토글클램프는 링크와 핀이 이루는 사점에서 얻어지는 잠금(Locking)기능을 이용한 제품으로,일정한
두께의 공작물 가공시 원터치로 공작물을 고정할 수 있어서 매우 편리합니다.토글클램프의 구조와
조작법은 간단하지만 큰 고정력을 얻을 수 있고,사용상 편리하여 널리 사용되어지고 있습니다.
Toggle clamp is a product using locking function guaranteed at the dead point of a linkage system of
links and pins. It is very convenient to fix workpiece with one-touch when machining constant
thickness of the workpiece. Toggle clamp’s structure and operating method are simple and it pro-
vides high clamping force. Toggle clamp is widely used due to its convenience.
Considerations when selecting the proper clamp
Application Examples
Automobile
Assembly jig, Part machining jig,
Inspection jig, Welding jig, Drill jig, Milling jig
Shipbuilding
Part machining jig
Electronic Rubber
Furniture Manufacturing
Processing
Carpentry Shoes Mold
Glove box Mold clamping
Railroad Car
Welding jig, Machining jig
Construction Chemical Industry
Welding jig, Bath tube molding Component
Requested clamping force Size and shape of installing surface
Operator’s positionPosition and interference of handles in installation
and operation
A frequency of operation (Temporary or Long period)
Toggle Clamp Introduction
1. 요구되는 고정력의 크기 선정
철도차량
용접지그,가공지그
조선
부품가공지그
건설
용접지그,욕조 몰딩용
화학공업
부품
용도 및 사용 예
자동차
조립 지그,부품가공지그,검사구,
용접지그,드릴지그,밀링가공지그
고무
몰드 클램프용
전자
글로브 박스
4. 4
Total Clamping System Model Number
KJFTOGGLE CLAMPS
Vertical type
Latch type Heavy Duty Weldable type Pneumatic type
Horizontal type Push/Pull type
1 2
Holding Capacity Toggle Clamp Types
ex) 005 = 50kg
018 = 180kg
120 = 1,200kg
1 = Vertical Type
2 = Horizontal Type
3 = Push / Pull Type
4 = Latch Type
* Except for Heavy Duty Weldable Type and
Pneumatic (Air) Type
4
Base Type
A=AngleType
F=FlangeType
S=StraightType
5
Material, Handle Type
No sign or R = Steel
S or SR = Stainless Steel
* Except for model no. 023-31FS, 040-31FS, 070-31FS
SL = Stainless Steel with Locking Handle
* Latch Type
A = Round Shape
B = T-Shape
3 Arm(Rod, U-Bolt) and Base
Vertical Type
Arm Type / Arm Length/Base Height
1 = U-Arm / Short / Low
2 = U-Arm / Long / Low (010-12□)
U-Arm / Middle / Low (018-12□)
3 = U-Arm / Middle / Low (010-13□)
U-Arm / Long / Low (018-13□)
5 = Solid Bar / Long / Low
6 = Solid Bar / Long / Low
7 = Solid Bar / Long / Low
Latch Type
U-Bolt Length / Direction
1 = Short / Horizontal
2 = Long / Horizontal
3 = Short / Vertical
* Except for Heavy Duty Weldable Type and
Pneumatic (Air) Type
Horizontal Type
Push/Pull Type
Arm Length / Base Height
1 = Short / Low
2 = Long / Low
3 = Short / High
4 = Long / High
Rod Stroke
1 = Short
2 = Long
Model Number
KJF - -
ex)
1
1
2
1
3
F
4
S
5
KJF 018
Operating Direction
16. 16KJFTOGGLE CLAMPS
Total Clamping System Stainless Steel
Model No. KJF-016-41FS
Model No. KJF-016-42FS
HoldingCapacity(kgf) 160 U-boltAdjust.(mm) 10
Weight(g) 78 BaseType Flange
HoldingCapacity(kgf) 160 U-boltAdjust.(mm) 10
Weight(g) 82 BaseType Flange
17. 17 KJF www.kjf.co.kr
Stainless SteelTotal Clamping System
Model No. KJF-032-41FS
Model No. KJF-032-42FS
HoldingCapacity(kgf) 320 U-boltAdjust.(mm) 20
Weight(g) 245 BaseType Flange
HoldingCapacity(kgf) 320 U-boltAdjust.(mm) 20
Weight(g) 260 BaseType Flange
18. 18KJFTOGGLE CLAMPS
Total Clamping System Stainless Steel
Model No. KJF-070-41FS
Model No. KJF-070-42FS
HoldingCapacity(kgf) 700 U-boltAdjust.(mm) 30
Weight(g) 771 BaseType Flange
HoldingCapacity(kgf) 700 U-boltAdjust.(mm) 30
Weight(g) 793 BaseType Flange
19. 19 KJF www.kjf.co.kr
Lock TypeTotal Clamping System
Model No. KJF-007-21FL
HoldingCapacity(kgf) 70 SpindleAdjust.(mm) 14
Weight(g) 60 ArmType U
HandleMove 179˚ ArmLength Short
ArmMove 95˚ BaseType Flange
SpindleSupplied M5 x30.0L BaseHeight Low
Lock Type
Locking Device
Galvanized Steel
Handle: PVC(~ 70℃)
NBR Pad(~100℃)
20. 20KJFTOGGLE CLAMPS
Total Clamping System Lock Type
Model No. KJF-032-41FSL
Model No. KJF-032-42FSL
HoldingCapacity(kgf) 320 U-boltAdjust.(mm) 20
Weight(g) 298 BaseType Flange
HoldingCapacity(kgf) 320 U-boltAdjust.(mm) 20
Weight(g) 300 BaseType Flange
* 떨림 /진동에 대한 풀림 방지용임.
* To prevent loosening against tremor/vibration.
* 떨림 /진동에 대한 풀림 방지용임.
* To prevent loosening against tremor/vibration.
21. 21 KJF www.kjf.co.kr
Vertical TypeTotal Clamping System
Vertical Type
Flange Base
Straight Base
Angle Base
Straight Base with Solid Bar
Handle: PVC(~70℃)
Galvanized Steel
NBR Pad(~100℃)
22. 22KJFTOGGLE CLAMPS
Total Clamping System Vertical Type
Model No. KJF-005-11F
Model No. KJF-009-11FS
HoldingCapacity(kgf) 50 SpindleAdjust.(mm) 20
Weight(g) 66 ArmType U
HandleMove 58˚ ArmLength Short
ArmMove 100˚ BaseType Flange
SpindleSupplied M5 x40.0L BaseHeight Low
HoldingCapacity(kgf) 90 SpindleAdjust.(mm) 20
Weight(g) 157 ArmType U
HandleMove 60˚ ArmLength Short
ArmMove 100˚ BaseType Flange
SpindleSupplied M6x44.0L BaseHeight Low
* Stainless Steel : Page 11
* Material : Stainless Steel
23. 23 KJF www.kjf.co.kr
Vertical TypeTotal Clamping System
Model No. KJF-010-11F
Model No. KJF-010-12F
Model No. KJF-010-13F
HoldingCapacity(kgf) 100 SpindleAdjust.(mm) 34
Weight(g) 165 ArmType U
HandleMove 62˚ ArmLength Short
ArmMove 101˚ BaseType Flange
SpindleSupplied M6 x58.0L BaseHeight Low
HoldingCapacity(kgf) 100 SpindleAdjust.(mm) 82
Weight(g) 185 ArmType U
HandleMove 62˚ ArmLength Long
ArmMove 101˚ BaseType Flange
SpindleSupplied M6 x58.0L BaseHeight Low
HoldingCapacity(kgf) 100 SpindleAdjust.(mm) 58
Weight(g) 175 ArmType U
HandleMove 62˚ ArmLength Middle
ArmMove 101˚ BaseType Flange
SpindleSupplied M6 x58.0L BaseHeight Low
24. 24KJFTOGGLE CLAMPS
Total Clamping System Vertical Type
Model No. KJF-018-11F
Model No. KJF-018-12F
Model No. KJF-018-13F
HoldingCapacity(kgf) 180 SpindleAdjust.(mm) 48
Weight(g) 400 ArmType U
HandleMove 66˚ ArmLength Short
ArmMove 114˚ BaseType Flange
SpindleSupplied M8x77.0L BaseHeight Low
HoldingCapacity(kgf) 180 SpindleAdjust.(mm) 98
Weight(g) 431 ArmType U
HandleMove 66˚ ArmLength Middle
ArmMove 114˚ BaseType Flange
SpindleSupplied M8x77.0L BaseHeight Low
HoldingCapacity(kgf) 180 SpindleAdjust.(mm) 127
Weight(g) 449 ArmType U
HandleMove 66˚ ArmLength Long
ArmMove 114˚ BaseType Flange
SpindleSupplied M8x77.0L BaseHeight Low
* Stainless Steel : Page 12
25. 25 KJF www.kjf.co.kr
Vertical TypeTotal Clamping System
Model No. KJF-040-12F
Model No. KJF-034-11FS
HoldingCapacity(kgf) 400 SpindleAdjust.(mm) N / A
Weight(g) 889 ArmType Solid
HandleMove 62˚ ArmLength
ArmMove 91˚ BaseType Flange
SpindleSupplied M10 x 89.0L BaseHeight Low
HoldingCapacity(kgf) 340 SpindleAdjust.(mm) 62
Weight(g) 659 ArmType U
HandleMove 58˚ ArmLength Short
ArmMove 103˚ BaseType Flange
SpindleSupplied M10x85.0L BaseHeight Low
* Material : Stainless Steel
Long
26. 26KJFTOGGLE CLAMPS
Total Clamping System Vertical Type
Model No. KJF-036-11F
Model No. KJF-036-12F
HoldingCapacity(kgf) 360 SpindleAdjust.(mm) 60
Weight(g) 819 ArmType U
HandleMove 60˚ ArmLength Short
ArmMove 115˚ BaseType Flange
SpindleSupplied M10x90.0L BaseHeight Low
HoldingCapacity(kgf) 360 SpindleAdjust.(mm) 114
Weight(g) 884 ArmType U
HandleMove 60˚ ArmLength Long
ArmMove 115˚ BaseType Flange
SpindleSupplied M10x90.0L BaseHeight Low
27. 27 KJF www.kjf.co.kr
Vertical TypeTotal Clamping System
Model No. KJF-045-11F
Model No. KJF-045-12F
HoldingCapacity(kgf) 450 SpindleAdjust.(mm) 103
Weight(g) 1410 ArmType U
HandleMove 62˚ ArmLength Short
ArmMove 99˚ BaseType Flange
SpindleSupplied M12x100.0L BaseHeight Low
HoldingCapacity(kgf) 450 SpindleAdjust.(mm) 143
Weight(g) 1470 ArmType U
HandleMove 62˚ ArmLength Long
ArmMove 99˚ BaseType Flange
SpindleSupplied M12x100.0L BaseHeight Low
28. 28KJFTOGGLE CLAMPS
Total Clamping System Vertical Type
Model No. KJF-055-11F
Model No. KJF-055-12F
HoldingCapacity(kgf) 550 SpindleAdjust.(mm) 108
Weight(g) 2400 ArmType U
HandleMove 48˚ ArmLength Short
ArmMove 92˚ BaseType Flange
SpindleSupplied M16x130.0L BaseHeight Low
HoldingCapacity(kgf) 550 SpindleAdjust.(mm) 168
Weight(g) 2560 ArmType U
HandleMove 48˚ ArmLength Long
ArmMove 92˚ BaseType Flange
SpindleSupplied M16x130.0L BaseHeight Low
29. 29 KJF www.kjf.co.kr
Vertical TypeTotal Clamping System
Model No. KJF-010-11S
Model No. KJF-010-12S
Model No. KJF-010-13S
HoldingCapacity(kgf) 100 SpindleAdjust.(mm) 34
Weight(g) 163 ArmType U
HandleMove 62˚ ArmLength Short
ArmMove 101˚ BaseType Straight
SpindleSupplied M6x58.0L BaseHeight Low
HoldingCapacity(kgf) 100 SpindleAdjust.(mm) 82
Weight(g) 182 ArmType U
HandleMove 62˚ ArmLength Long
ArmMove 101˚ BaseType Straight
SpindleSupplied M6x58.0L BaseHeight Low
HoldingCapacity(kgf) 100 SpindleAdjust.(mm) 58
Weight(g) 175 ArmType U
HandleMove 62˚ ArmLength Middle
ArmMove 101˚ BaseType Straight
SpindleSupplied M6x58.0L BaseHeight Low
30. 30KJFTOGGLE CLAMPS
Total Clamping System Vertical Type
Model No. KJF-018-11S
Model No. KJF-018-12S
Model No. KJF-018-13S
HoldingCapacity(kgf) 180 SpindleAdjust.(mm) 48
Weight(g) 403 ArmType U
HandleMove 66˚ ArmLength Short
ArmMove 114˚ BaseType Straight
SpindleSupplied M8x77.0L BaseHeight Low
HoldingCapacity(kgf) 180 SpindleAdjust.(mm) 98
Weight(g) 403 ArmType U
HandleMove 66˚ ArmLength Middle
ArmMove 114˚ BaseType Straight
SpindleSupplied M8x77.0L BaseHeight Low
HoldingCapacity(kgf) 180 SpindleAdjust.(mm) 127
Weight(g) 452 ArmType U
HandleMove 66˚ ArmLength Long
ArmMove 114˚ BaseType Straight
SpindleSupplied M8x77.0L BaseHeight Low
31. 31 KJF www.kjf.co.kr
Vertical TypeTotal Clamping System
Model No. KJF-045-11S
Model No. KJF-045-12S
HoldingCapacity(kgf) 450 SpindleAdjust.(mm) 103
Weight(g) 1420 ArmType U
HandleMove 62˚ ArmLength Short
ArmMove 99˚ BaseType Straight
SpindleSupplied M12x100.0L BaseHeight Low
HoldingCapacity(kgf) 450 SpindleAdjust.(mm) 143
Weight(g) 1440 ArmType U
HandleMove 62˚ ArmLength Long
ArmMove 99˚ BaseType Straight
SpindleSupplied M12x100.0L BaseHeight Low
32. 32KJFTOGGLE CLAMPS
Total Clamping System Vertical Type
Model No. KJF-055-11S
Model No. KJF-055-12S
HoldingCapacity(kgf) 550 SpindleAdjust.(mm) 108
Weight(g) 2400 ArmType U
HandleMove 48˚ ArmLength Short
ArmMove 92˚ BaseType Straight
SpindleSupplied M16x130.0L BaseHeight Low
HoldingCapacity(kgf) 550 SpindleAdjust.(mm) 168
Weight(g) 2540 ArmType U
HandleMove 48˚ ArmLength Long
ArmMove 92˚ BaseType Straight
SpindleSupplied M16x130.0L BaseHeight Low
33. 33 KJF www.kjf.co.kr
Vertical TypeTotal Clamping System
Model No. KJF-010-11A
Model No. KJF-010-12A
Model No. KJF-010-13A
HoldingCapacity(kgf) 100 SpindleAdjust.(mm) 34
Weight(g) 187 ArmType U
HandleMove 62˚ ArmLength Short
ArmMove 101˚ BaseType Angle
SpindleSupplied M6x58.0L BaseHeight Low
HoldingCapacity(kgf) 100 SpindleAdjust.(mm) 82
Weight(g) 207 ArmType U
HandleMove 62˚ ArmLength Long
ArmMove 101˚ BaseType Angle
SpindleSupplied M6x58.0L BaseHeight Low
HoldingCapacity(kgf) 100 SpindleAdjust.(mm) 58
Weight(g) 199 ArmType U
HandleMove 62˚ ArmLength Middle
ArmMove 101˚ BaseType Angle
SpindleSupplied M6x58.0L BaseHeight Low
34. 34KJFTOGGLE CLAMPS
Total Clamping System Vertical Type
Model No. KJF-018-11A
Model No. KJF-018-12A
Model No. KJF-018-13A
HoldingCapacity(kgf) 180 SpindleAdjust.(mm) 48
Weight(g) 466 ArmType U
HandleMove 66˚ ArmLength Short
ArmMove 114˚ BaseType Angle
SpindleSupplied M8x77.0L BaseHeight Low
HoldingCapacity(kgf) 180 SpindleAdjust.(mm) 98
Weight(g) 503 ArmType U
HandleMove 66˚ ArmLength Middle
ArmMove 114˚ BaseType Angle
SpindleSupplied M8x77.0L BaseHeight Low
HoldingCapacity(kgf) 180 SpindleAdjust.(mm) 127
Weight(g) 515 ArmType U
HandleMove 66˚ ArmLength Long
ArmMove 114˚ BaseType Angle
SpindleSupplied M8x77.0L BaseHeight Low
35. 35 KJF www.kjf.co.kr
Vertical TypeTotal Clamping System
Model No. KJF-018-15F
Model No. KJF-018-16F
Model No. KJF-018-17F
HoldingCapacity(kgf) 180 SpindleAdjust.(mm) N / A
Weight(g) 405 ArmType Solid
HandleMove 66˚ ArmLength Long
ArmMove 114˚ BaseType Flange
SpindleSupplied M8x77.0L BaseHeight Low
HoldingCapacity(kgf) 180 SpindleAdjust.(mm) N / A
Weight(g) 441 ArmType Solid
HandleMove 66˚ ArmLength Long
ArmMove 114˚ BaseType Flange
SpindleSupplied M8x77.0L BaseHeight Low
HoldingCapacity(kgf) 180 SpindleAdjust.(mm) N / A
Weight(g) 479 ArmType Solid
HandleMove 66˚ ArmLength Long
ArmMove 114˚ BaseType Flange
SpindleSupplied M8x77.0L BaseHeight Low
36. 36KJFTOGGLE CLAMPS
Total Clamping System Vertical Type
Model No. KJF-017-16S
Model No. KJF-018-15S
HoldingCapacity(kgf) 170 SpindleAdjust.(mm) N / A
Weight(g) 406 ArmType Solid
HandleMove 56˚ ArmLength Short
ArmMove 99.3˚ BaseType Straight
SpindleSupplied M8x67.0L BaseHeight Low
HoldingCapacity(kgf) 180 SpindleAdjust.(mm) N / A
Weight(g) 405 ArmType Solid
HandleMove 66˚ ArmLength Long
ArmMove 114˚ BaseType Straight
SpindleSupplied M8x77.0L BaseHeight Low
37. 37 KJF www.kjf.co.kr
Vertical TypeTotal Clamping System
Model No. KJF-018-16S
Model No. KJF-018-17S
HoldingCapacity(kgf) 180 SpindleAdjust.(mm) N / A
Weight(g) 440 ArmType Solid
HandleMove 66˚ ArmLength Long
ArmMove 114˚ BaseType Straight
SpindleSupplied M8x77.0L BaseHeight Low
HoldingCapacity(kgf) 180 SpindleAdjust.(mm) N / A
Weight(g) 471 ArmType Solid
HandleMove 66˚ ArmLength Long
ArmMove 114˚ BaseType Straight
SpindleSupplied M8x77.0L BaseHeight Low
38. 38KJFTOGGLE CLAMPS
Total Clamping System Vertical Type
Model No. KJF-018-15A
Model No. KJF-018-16A
Model No. KJF-018-17A
HoldingCapacity(kgf) 180 SpindleAdjust.(mm) N / A
Weight(g) 477 ArmType Solid
HandleMove 66˚ ArmLength Long
ArmMove 114˚ BaseType Angle
SpindleSupplied M8x77.0L BaseHeight Low
HoldingCapacity(kgf) 180 SpindleAdjust.(mm) N / A
Weight(g) 508 ArmType Solid
HandleMove 66˚ ArmLength Long
ArmMove 114˚ BaseType Angle
SpindleSupplied M8x77.0L BaseHeight Low
HoldingCapacity(kgf) 180 SpindleAdjust.(mm) N / A
Weight(g) 538 ArmType Solid
HandleMove 66˚ ArmLength Long
ArmMove 114˚ BaseType Angle
SpindleSupplied M8x77.0L BaseHeight Low
17A
39. 39 KJF www.kjf.co.kr
Horizontal TypeTotal Clamping System
Horizontal Type
Flange Base
Flange Angle Base
Angle Base
Straight Base
Handle: PVC(~70℃)
Galvanized Steel
NBR Pad(~100℃)
40. 40KJFTOGGLE CLAMPS
Total Clamping System Horizontal Type
Model No. KJF-002-21FR
Model No. KJF-003-21F
Model No. KJF-003-25F
HoldingCapacity(kgf) 20 SpindleAdjust.(mm) 9
Weight(g) 30 ArmType U
HandleMove 82˚ ArmLength Short
ArmMove 75˚ BaseType Flange
SpindleSupplied M4x25.0L BaseHeight Low
HoldingCapacity(kgf) 30 SpindleAdjust.(mm) 12
Weight(g) 31 ArmType U
HandleMove 71˚ ArmLength Short
ArmMove 80˚ BaseType Flange
SpindleSupplied M5x25.0L BaseHeight Low
HoldingCapacity(kgf) 30 SpindleAdjust.(mm) N / A
Weight(g) 27 ArmType Solid
HandleMove 71˚ ArmLength Short
ArmMove 80˚ BaseType Flange
SpindleSupplied M4x30.0L BaseHeight Low
* Stainless Steel : Page 13
41. 41 KJF www.kjf.co.kr
Horizontal TypeTotal Clamping System
Model No. KJF-006-21F
Model No. KJF-007-21F
HoldingCapacity(kgf) 60 SpindleAdjust.(mm) 25
Weight(g) 83 ArmType U
HandleMove 71˚ ArmLength Short
ArmMove 80˚ BaseType Flange
SpindleSupplied M5x40.0L BaseHeight Low
HoldingCapacity(kgf) 70 SpindleAdjust.(mm) 14
Weight(g) 57 ArmType U
HandleMove 179˚ ArmLength Short
ArmMove 95˚ BaseType Flange
SpindleSupplied M5x30.0L BaseHeight Low
* Stainless Steel : Page 13
42. 42KJFTOGGLE CLAMPS
Total Clamping System Horizontal Type
Model No. KJF-007-21FS
Model No. KJF-007-21FL
HoldingCapacity(kgf) 70 SpindleAdjust.(mm) 14
Weight(g) 56 ArmType U
HandleMove 179˚ ArmLength Short
ArmMove 95˚ BaseType Flange
SpindleSupplied M5x36.0L BaseHeight Low
HoldingCapacity(kgf) 70 SpindleAdjust.(mm) 14
Weight(g) 60 ArmType U
HandleMove 179˚ ArmLength Short
ArmMove 95˚ BaseType Flange
SpindleSupplied M5x30.0L BaseHeight Low
* Material : Stainless Steel
43. 43 KJF www.kjf.co.kr
Horizontal TypeTotal Clamping System
Model No. KJF-009-21F
Model No. KJF-010-21F
HoldingCapacity(kgf) 90 SpindleAdjust.(mm) 36
Weight(g) 124 ArmType U
HandleMove 64˚ ArmLength Short
ArmMove 79˚ BaseType Flange
SpindleSupplied M6x58.0L BaseHeight Low
HoldingCapacity(kgf) 100 SpindleAdjust.(mm) 30
Weight(g) 137 ArmType U
HandleMove 75˚ ArmLength Short
ArmMove 67˚ BaseType Flange
SpindleSupplied M6x58.0L BaseHeight Low
* Stainless Steel : Page 14
44. 44KJFTOGGLE CLAMPS
Total Clamping System Horizontal Type
Model No. KJF-018-21FA
Model No. KJF-022-21F
HoldingCapacity(kgf) 180 SpindleAdjust.(mm) 50
Weight(g) 441 ArmType U
HandleMove 57˚ ArmLength Short
ArmMove 185˚ BaseType Angle
SpindleSupplied M8x77.0L BaseHeight Low
* Stainless Steel : Page 14
* 2 Touch Type
핸들과 암을 함께 작동해야 함.
HoldingCapacity(kgf) 220 SpindleAdjust.(mm) 44
Weight(g) 257 ArmType U
HandleMove 68˚ ArmLength Short
ArmMove 83˚ BaseType Flange
SpindleSupplied M8x67.0L BaseHeight Low
45. 45 KJF www.kjf.co.kr
Horizontal TypeTotal Clamping System
Model No. KJF-023-21F
Model No. KJF-023-22F
HoldingCapacity(kgf) 230 SpindleAdjust.(mm) 40
Weight(g) 394 ArmType U
HandleMove 70˚ ArmLength Short
ArmMove 82˚ BaseType Flange
SpindleSupplied M8x77.0L BaseHeight Low
HoldingCapacity(kgf) 230 SpindleAdjust.(mm) 80
Weight(g) 426 ArmType U
HandleMove 70˚ ArmLength Long
ArmMove 82˚ BaseType Flange
SpindleSupplied M8x77.0L BaseHeight Low
46. 46KJFTOGGLE CLAMPS
Total Clamping System Horizontal Type
Fastening or supporting
automotive parts
to machine, assemble or check
Model No. KJF-030-21F
HoldingCapacity(kgf) 300 SpindleAdjust.(mm) 60
Weight(g) 621 ArmType U
HandleMove 87˚ ArmLength Short
ArmMove 87˚ BaseType Flange
SpindleSupplied M10x90.0L BaseHeight Low
47. 47 KJF www.kjf.co.kr
Horizontal TypeTotal Clamping System
Model No. KJF-040-21F
Model No. KJF-040-22F
HoldingCapacity(kgf) 400 SpindleAdjust.(mm) 52
Weight(g) 661 ArmType U
HandleMove 58˚ ArmLength Short
ArmMove 92˚ BaseType Flange
SpindleSupplied M10 x90.0L BaseHeight Low
HoldingCapacity(kgf) 400 SpindleAdjust.(mm) 98
Weight(g) 710 ArmType U
HandleMove 58˚ ArmLength Long
ArmMove 92˚ BaseType Flange
SpindleSupplied M10 x90.0L BaseHeight Low
48. 48KJFTOGGLE CLAMPS
Total Clamping System Horizontal Type
Model No. KJF-040-23F
Model No. KJF-040-24F
HoldingCapacity(kgf) 400 SpindleAdjust.(mm) 52
Weight(g) 734 ArmType U
HandleMove 58˚ ArmLength Short
ArmMove 92˚ BaseType Flange
SpindleSupplied M10 x90.0L BaseHeight High
HoldingCapacity(kgf) 400 SpindleAdjust.(mm) 98
Weight(g) 791 ArmType U
HandleMove 58˚ ArmLength Long
ArmMove 92˚ BaseType Flange
SpindleSupplied M10 x90.0L BaseHeight High
49. 49 KJF www.kjf.co.kr
Horizontal TypeTotal Clamping System
Model No. KJF-065-21F
Model No. KJF-065-22F
HoldingCapacity(kgf) 650 SpindleAdjust.(mm) 45
Weight(g) 1590 ArmType U
HandleMove 46˚ ArmLength Short
ArmMove 92˚ BaseType Flange
SpindleSupplied M12x100.0L BaseHeight Low
HoldingCapacity(kgf) 650 SpindleAdjust.(mm) 90
Weight(g) 1670 ArmType U
HandleMove 46˚ ArmLength Long
ArmMove 92˚ BaseType Flange
SpindleSupplied M12x100.0L BaseHeight Low
50. 50KJFTOGGLE CLAMPS
Total Clamping System Horizontal Type
Model No. KJF-065-23F
Model No. KJF-065-24F
HoldingCapacity(kgf) 650 SpindleAdjust.(mm) 45
Weight(g) 1590 ArmType U
HandleMove 46˚ ArmLength Short
ArmMove 92˚ BaseType Flange
SpindleSupplied M12x100.0L BaseHeight High
HoldingCapacity(kgf) 650 SpindleAdjust.(mm) 90
Weight(g) 1680 ArmType U
HandleMove 46˚ ArmLength Long
ArmMove 92˚ BaseType Flange
SpindleSupplied M12x100.0L BaseHeight High
51. 51 KJF www.kjf.co.kr
Horizontal TypeTotal Clamping System
Model No. KJF-023-21A
Model No. KJF-023-22A
HoldingCapacity(kgf) 230 SpindleAdjust.(mm) 40
Weight(g) 429 ArmType U
HandleMove 70˚ ArmLength Short
ArmMove 82˚ BaseType Angle
SpindleSupplied M8x77.0L BaseHeight Low
HoldingCapacity(kgf) 230 SpindleAdjust.(mm) 80
Weight(g) 460 ArmType U
HandleMove 70˚ ArmLength Long
ArmMove 82˚ BaseType Angle
SpindleSupplied M8x77.0L BaseHeight Low
52. 52KJFTOGGLE CLAMPS
Total Clamping System Horizontal Type
Model No. KJF-065-21S
Model No. KJF-065-22S
HoldingCapacity(kgf) 650 SpindleAdjust.(mm) 45
Weight(g) 1580 ArmType U
HandleMove 46˚ ArmLength Short
ArmMove 92˚ BaseType Straight
SpindleSupplied M12x100.0L BaseHeight Low
HoldingCapacity(kgf) 650 SpindleAdjust.(mm) 90
Weight(g) 1670 ArmType U
HandleMove 46˚ ArmLength Long
ArmMove 92˚ BaseType Straight
SpindleSupplied M12x100.0L BaseHeight Low
53. 53 KJF www.kjf.co.kr
Horizontal TypeTotal Clamping System
Model No. KJF-065-23S
Model No. KJF-065-24S
HoldingCapacity(kgf) 650 SpindleAdjust.(mm) 45
Weight(g) 1570 ArmType U
HandleMove 46˚ ArmLength Short
ArmMove 92˚ BaseType Straight
SpindleSupplied M12x100.0L BaseHeight High
HoldingCapacity(kgf) 650 SpindleAdjust.(mm) 90
Weight(g) 1670 ArmType U
HandleMove 46˚ ArmLength Long
ArmMove 92˚ BaseType Straight
SpindleSupplied M12x100.0L BaseHeight High
55. 55 KJF www.kjf.co.kr
Push/Pull TypeTotal Clamping System
Push / Pull Type
Flange Base
Threaded Base
Flange Base
Horizontal Handle
Side Handle (005-31FL)
Handle: PVC(~70℃)
Galvanized Steel
NBR Pad(~100℃)
★볼트타입 스핀들:
고무패드 타입으로
교체가능
56. 56KJFTOGGLE CLAMPS
Total Clamping System Push/Pull Type
Model No. KJF-005-31FL
Model No. KJF-005-31FR
Model No. KJF-005-31F
HoldingCapacity(kgf) 50 SpindleSupplied M4x17.0L
Weight(g) 52 RodStroke(mm) 16
HandleMove 180˚ BaseType Flange
HoldingCapacity(kgf) 50 SpindleSupplied M4x17.0L
Weight(g) 52 RodStroke(mm) 16
HandleMove 180˚ BaseType Flange
HoldingCapacity(kgf) 50 SpindleSupplied M4x30.0L
Weight(g) 43 RodStroke(mm) 16
HandleMove 177˚ BaseType Flange
57. 57 KJF www.kjf.co.kr
Push/Pull TypeTotal Clamping System
Model No. KJF-010-31F
Model No. KJF-014-31F
Model No. KJF-014-31FF
HoldingCapacity(kgf) 100 SpindleSupplied M5x40.0L
Weight(g) 106 RodStroke(mm) 13
HandleMove 87˚ BaseType Flange
HoldingCapacity(kgf) 140 SpindleSupplied M8x65.0L
Weight(g) 305 RodStroke(mm) 32
HandleMove 174˚ BaseType Flange
HoldingCapacity(kgf) 140 SpindleSupplied M8x65.0L
Weight(g) 306 RodStroke(mm) 28
HandleMove 178˚ BaseType Flange
* Stainless Steel : Page 15
* 이 제품은 당기기(Pull) 전용임!
* Use it exclusively for Pull Type!
* 이 제품은 밀기(Push) 전용임!
* Use it exclusively for Push Type!
58. 58KJFTOGGLE CLAMPS
Total Clamping System Push/Pull Type
Model No. KJF-045-31F
HoldingCapacity(kgf) 450 SpindleSupplied N / A
Weight(g) 925 RodStroke(mm) 50
HandleMove 186˚ BaseType Flange
Fastening or
supporting
automotive parts
to machine,
assemble or check
64. 64KJFTOGGLE CLAMPS
Total Clamping System Push/Pull Type
Model No. KJF-030-31F
Model No. KJF-016-31F
HoldingCapacity(kgf) 160 SpindleSupplied N / A
Weight(g) 442 RodStroke(mm) 12
HandleMove 49˚ BaseType Flange
HoldingCapacity(kgf) 300 SpindleSupplied M10x49.0L
Weight(g) 830 RodStroke(mm) 67
HandleMove 180˚ BaseType Threaded
* 이 제품은 밀기(Push) 전용임!
* Use it exclusively for Push Type!
70. 70KJFTOGGLE CLAMPS
Total Clamping System Latch Type
Model No. KJF-070-41F
Model No. KJF-070-42F
HoldingCapacity(kgf) 700 U-boltAdjust.(mm) 30
Weight(g) 778 BaseType Flange
HoldingCapacity(kgf) 700 U-boltAdjust.(mm) 30
Weight(g) 800 BaseType Flange
* Stainless Steel : Page 18
* Stainless Steel : Page 18
71. 71 KJF www.kjf.co.kr
Latch TypeTotal Clamping System
Model No. KJF-340-41FR
HoldingCapacity(kgf) 3400 U-boltAdjust.(mm) 29
Weight(g) 1980 BaseType Flange
Fastening or supporting
aerospace parts
to machine, assemble or check
72. 72KJFTOGGLE CLAMPS
Total Clamping System Latch Type
Model No. KJF-016-43F
Model No. KJF-032-43F
HoldingCapacity(kgf) 160 U-boltAdjust.(mm) 10
Weight(g) 102 BaseType Flange
HoldingCapacity(kgf) 320 U-boltAdjust.(mm) 20
Weight(g) 320 BaseType Flange
73. 73 KJF www.kjf.co.kr
Latch TypeTotal Clamping System
Model No. KJF-017-41F
Model No. KJF-030-41F
HoldingCapacity(kgf) 170 U-boltAdjust.(mm) 15
Weight(g) 269 BaseType Flange
HoldingCapacity(kgf) 300 U-boltAdjust.(mm) 20
Weight(g) 482 BaseType Flange
74. 74KJFTOGGLE CLAMPS
Total Clamping System Latch Type
Model No. KJF-022-51FR
HoldingCapacity(kgf) 220 U-boltAdjust.(mm) N / A
Weight(g) 202 BaseType Flange
Fastening or supporting
aerospace parts
to machine, assemble or check
75. 75 KJF www.kjf.co.kr
Heavy Duty Weldable TypeTotal Clamping System
Heavy Duty Weldable Type
1. 컴팩트하여 설치가 용이하고 피벗 핀과 부싱 구조를 채택하여
내구성을 향상 시켰습니다.
2. 메인바디와 핸들만 공급되며 솔리드바와 베이스는 사용자가
만들어 사용해야 합니다.
3. 사용자는 메인바디와 핸들,솔리드바,써포트를 알맞게 용접해서
사용해야 합니다.
1. Compactdesignallowseasyinstallationand
pivotpin&bushingstructureprovidesimproveddurability.
2. Aclampwillcomewiththemainbodyandhandlebut
solidbarandbaseshouldbemadebyauser.
3. Theuserneedstoweldthemainbody,handle,solidbarand
supportproperlybeforeusing.
Welding Type Base Bolting Type Base
76. 76KJFTOGGLE CLAMPS
Total Clamping System Heavy Duty Weldable Type
Model No. KJF-VR-01
Model No. KJF-VR-11
HoldingCapacity(kgf) 500 HandleMove 116˚
Weight(g) 556 ArmMove 187˚
BaseType Weldable
HoldingCapacity(kgf) 500 HandleMove 116˚
Weight(g) 609 ArmMove 187˚
BaseType Bolting
77. 77 KJF www.kjf.co.kr
Heavy Duty Weldable TypeTotal Clamping System
Model No. KJF-VR-02
Model No. KJF-VR-12
HoldingCapacity(kgf) 1000 HandleMove 116˚
Weight(g) 1330 ArmMove 187˚
BaseType Weldable
HoldingCapacity(kgf) 1000 HandleMove 116˚
Weight(g) 1380 ArmMove 187˚
BaseType Bolting
78. 78KJFTOGGLE CLAMPS
Total Clamping System Heavy Duty Weldable Type
Model No. KJF-VR-03
Model No. KJF-VR-13
HoldingCapacity(kgf) 2000 HandleMove 116˚
Weight(g) 2440 ArmMove 187˚
BaseType Weldable
HoldingCapacity(kgf) 2000 HandleMove 116˚
Weight(g) 2660 ArmMove 187˚
BaseType Weldable
79. 79 KJF www.kjf.co.kr
Heavy Duty Weldable TypeTotal Clamping System
Model No. KJF-VR-30SR
HoldingCapacity(kgf) 300 HandMove 134˚
Weight(g) 290 ArmMove 210˚
BaseType Weldable
81. 81 KJF www.kjf.co.kr
Pneumatic TypeTotal Clamping System
Pneumatic Type
Vertical Type Toggle Clamp
Heavy Duty Weldable Type Toggle Clamp
Push/Pull Type Toggle Clamp
* 마그네트 내장형 실린더
* Cylinder with Built-In Magnet
82. 82KJFTOGGLE CLAMPS
Total Clamping System Pneumatic Type
Model No. KJF-AR-1051
HoldingCapacity(kgf) 50 SpindleAdjust.(mm) 17
Weight(g) 345 AirPortSize PT 1/8
ArmMove 103˚ CylinderSize ø20x25(ST)
86. 86KJFTOGGLE CLAMPS
Total Clamping System Pneumatic Type
Model No. KJF-AR-1451
Model No. KJF-AR-1452
HoldingCapacity(kgf) 450 SpindleAdjust.(mm) 103
Weight(g) 3180 AirPortSize PT 1/4
ArmMove 115˚ CylinderSize ø40x100(ST)
HoldingCapacity(kgf) 450 SpindleAdjust.(mm) 143
Weight(g) 3230 AirPortSize PT 1/4
ArmMove 143˚ CylinderSize ø40x100(ST)
87. 87 KJF www.kjf.co.kr
Pneumatic TypeTotal Clamping System
Model No. KJF-AR-701
Model No. KJF-AR-702
HoldingCapacity(kgf) 500 SpindleAdjust.(mm) N / A
Weight(g) 1410 AirPortSize PT 1/8
ArmMove 92˚ CylinderSize ø32x75(ST)
HoldingCapacity(kgf) 1000 SpindleAdjust.(mm) N / A
Weight(g) 2940 AirPortSize PT 1/4
ArmMove 92˚ CylinderSize ø40x100(ST)
88. 88KJFTOGGLE CLAMPS
Total Clamping System Pneumatic Type
Model No. KJF-AR-702A
Model No. KJF-AR-3040
HoldingCapacity(kgf) 1000 SpindleAdjust.(mm) N / A
Weight(g) 4820 AirPortSize PT 3/8
ArmMove 187˚ CylinderSize ø63x100(ST)
HoldingCapacity(kgf) 400 RodStroke(mm) 24
Weight(g) 1500 AirPortSize PT 1/8
ArmMove N / A CylinderSize ø32x50(ST)
89. 89 KJF www.kjf.co.kr
Pneumatic TypeTotal Clamping System
Model No. KJF-AR-3070
Model No. KJF-AR-3120
HoldingCapacity(kgf) 700 RodStroke(mm) 35
Weight(g) 3400 AirPortSize PT 1/4
ArmMove N / A CylinderSize ø40x75(ST)
HoldingCapacity(kgf) 1200 RodStroke(mm) 40
Weight(g) 5840 AirPortSize PT 3/8
ArmMove N / A CylinderSize ø50 x100(ST)
90. 90KJFTOGGLE CLAMPS
Total Clamping System Spindle & Washer
Rubber Spindles
Model No. A Pitch B C D E F G Remark
C8110430 M4 0.7 30 24 11 6 5 1 Standard
C8150530 M5 0.8 30 25 10 10 5 N/A
C8110540 M5 0.8 40 31 14 10 7 2 Standard
C8110658 M6 1 58 47 16 10 9 2 Standard
C81106100 M6 1 100 89 16 10 9 2
C81106150 M6 1 150 139 16 10 9 2
C8150842 M8 1.25 42 33 19 19 9 N/A
C8110867 M8 1.25 67 51 22 13 11 5
C8110877 M8 1.25 77 61 22 13 11 5 Standard
C81108100 M8 1.25 100 84 22 13 11 5
C81108110 M8 1.25 110 94 22 13 11 5
C81108120 M8 1.25 120 104 22 13 11 5
C81108130 M8 1.25 130 114 22 13 11 5
C81108150 M8 1.25 150 134 22 13 11 5
C81108160 M8 1.25 160 144 22 13 11 5
C81108200 M8 1.25 200 184 22 13 11 5
C8111090 M10 1.5 90 69 26 17 14 7 Standard
C81110100 M10 1.5 100 79 26 17 14 7
C81110110 M10 1.5 110 89 26 17 14 7
C81110115 M10 1.5 115 94 26 17 14 7
C81110120 M10 1.5 120 99 26 17 14 7
C81110140 M10 1.5 140 119 26 17 14 7
C81112114 M12 1.75 114 92 28 20 15 7 Standard
Stainless Steel Rubber Spindles
Model No. A Pitch B C D E F G Remark
C8120540 M5 0.8 40 31 14 10 7 2 Standard
C8120658 M6 1 58 47 16 10 9 2 Standard
C8120867 M8 1.25 67 51 22 13 11 5
C8120877 M8 1.25 77 61 22 13 11 5 Standard
C81208110 M8 1.25 110 94 22 13 11 5
Bolt Spindles
Model No. A Pitch B C Remark
C8130525 M5 0.8 25 3.5 Standard
C8130630 M6 1 30 4 Standard
C8130865 M8 1.25 65 5.5 Standard
C81308100 M8 1.25 100 5.5
C8131050 M10 1.5 50 7
C8131075 M10 1.5 75 7 Standard
C8131280 M12 1.75 80 8
C81312100 M12 1.75 100 8 Standard
C81316130 M16 2 130 10 Standard
Washer (for U-Arm)
Model No. A
C8305 M5 Spindle
C8306 M6 Spindle
C8308 M8 Spindle
C8310 M10 Spindle
C8312 M12 Spindle
C8316 M16 Spindle