Bumperite Catalogue #2

Patent Pending Keep it watertight with Welded steel anchor Wood/Steel anchor Concrete anchor Sealable scaffold attachment system for exterior plaster Enhance Safety and Eliminate Water Intrusion at Scaffold Ties Toll Free (877) 490-8884

THE PROBLEM Water intrusion at conventional push pull wire ties. THE SOLUTION Sealable scaffold attachments. Bumperite Waterguards enhance Safety and eliminate Liability due to leaks caused by conventional scaffold wire ties assemblies . Patent Pending

[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],* See installation instructions. WARRANTY: Bumperite Waterguards, LLC. liability expressed or implied is limited to the selling price of any defected goods. User shall determine the suitability of this product for the intended use by doing field test before using, and assumes all risk and liabilities in connection and seals therewith. Patent Pending

Welded Steel Anchor INSTALLATION PROCEDURE ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],*Spacing requirements for application should be determined by a competent scaffold erector or structural engineer per building and safety codes prior to installation . The temporary disconnection and reconnection of this product at erected scaffold should only be performed one connection at a time and only after it is determined safe to do so. The final determination of safety is the sole responsibility of the end user and should be determined by a competent and qualified person. Follow all OSHA, Federal, State, and Local requirements to ensure scaffold safety. To ensure safety, use only components manufactured by Bumperite Waterguards, LLC. at scaffold attachment. 1/8” Patent Pending

Bumperite Attachment To Steel Bent Plate Illustrations and load Capacity provided by FICCADENTI & WAGGONER , Consulting Structural Engineers, Inc

WOOD INSTALLATION PROCEDURE ,[object Object],[object Object],[object Object],[object Object],[object Object],*Spacing requirements for application should be determined by a competent scaffold erector or structural engineer per building and safety codes prior to installation . The temporary disconnection and reconnection of this product at erected scaffold should only be performed one connection at a time and only after it is determined safe to do so. The final determination of safety is the sole responsibility of the end user and should be determined by a competent and qualified person. Follow all OSHA, Federal, State, and Local requirements to ensure scaffold safety. To ensure safety, use only components manufactured by Bumperite Waterguards, LLC. at scaffold attachment. See engineered detail. Patent Pending

Bumperite Attachment to Wood Framing Allowable Screw withdraw Value (P): Allowable Nail Withdraw Value (P): Illustrations and load Capacity provided by FICCADENTI & WAGGONER , Consulting Structural Engineers, Inc 810 lbs. 810 lbs. 540 lbs. 270 lbs. #10 x 1 1 ∕ 2 " Screw 1232 lbs. 1080 lbs. 720 lbs. 360 lbs. #10 x 2" Screw 1232 lbs. 924 lbs. 616 lbs. 308 lbs. #12 x 1 1 ∕ 2 " Screw 1232 lbs. 1080 lbs. 820 lbs. 410 lbs. #12 x 2" Screw w/ 8 Fasteners w/ 6 Fasteners w/ 4 Fasteners w/ 2 Fasteners Fastener Type (Screw Size x Length) 144 lbs. 108 lbs. 72 lbs. 36 lbs. 10d Nail 160 lbs. 120 lbs. 80 lbs. 40 lbs. 16d Nail w/ 8 Fasteners w/ 6 Fasteners w/ 4 Fasteners w/ 2 Fasteners Fastener Type

STEEL FRAMED INSTALLATION PROCEDURE ,[object Object],[object Object],[object Object],[object Object],[object Object],*Spacing requirements for application should be determined by a competent scaffold erector or structural engineer per building and safety codes prior to installation . The temporary disconnection and reconnection of this product at erected scaffold should only be performed one connection at a time and only after it is determined safe to do so. The final determination of safety is the sole responsibility of the end user and should be determined by a competent and qualified person. Follow all OSHA, Federal, State, and Local requirements to ensure scaffold safety. To ensure safety, use only components manufactured by Bumperite Waterguards, LLC. at scaffold attachment. See engineered detail. Patent Pending

Bumperite Attachment to Light Gauge Framing Minimum Design Requirements : : ALLOWABLE FORCE (P) = 1,000 LBS. ,[object Object],[object Object],[object Object],[object Object],[object Object],Illustrations and load Capacity provided by FICCADENTI & WAGGONER , Consulting Structural Engineers, Inc

Bumperite Attachment to Light Gauge Framing Minimum Design Requirements : : ALLOWABLE FORCE (P) = 500 LBS. ,[object Object],[object Object],[object Object],[object Object],[object Object],Illustrations and load Capacity provided by FICCADENTI & WAGGONER , Consulting Structural Engineers, Inc 6” x 16GA x 1-1/2” FLANGE TRACK W / CUPPED FLANGES @ ENDS EXTEND WEB TAB ATTACHMENT TO (E) STUD AS SHOWN (4) # 8 S.M.S. EA. END ALT. #1

CONCRETE INSTALLATION PROCEDURE ,[object Object],[object Object],[object Object],[object Object],[object Object],*Spacing requirements for application should be determined by a competent scaffold erector or structural engineer per building and safety codes prior to installation . The temporary disconnection and reconnection of this product at erected scaffold should only be performed one connection at a time and only after it is determined safe to do so. The final determination of safety is the sole responsibility of the end user and should be determined by a competent and qualified person. Follow all OSHA, Federal, State, and Local requirements to ensure scaffold safety. To ensure safety, use only components manufactured by Bumperite Waterguards, LLC. at scaffold attachment. See engineered detail. Patent Pending

Bumperite Attachment to Concrete Deck Illustrations and load Capacity provided by FICCADENTI & WAGGONER , Consulting Structural Engineers, Inc

BUMPERITE QUICK-TAB Optional feature ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],*Spacing requirements for application should be determined by a competent scaffold erector or structural engineer per building and safety codes prior to installation . The temporary disconnection and reconnection of this product at erected scaffold should only be performed one connection at a time and only after it is determined safe to do so. The final determination of safety is the sole responsibility of the end user and should be determined by a competent and qualified person. Follow all OSHA, Federal, State, and Local requirements to ensure scaffold safety. To ensure safety, use only components manufactured by Bumperite Waterguards, LLC. at scaffold attachment. Patent Pending

Bumperite Quick-Tab Attachment Illustrations and load Capacity provided by FICCADENTI & WAGGONER , Consulting Structural Engineers, Inc

Manufacturer recommends the use of Densglass Gold exterior sheathing, butyl sealant, Tyvek Straight Flash, minimum UU-B-790a grade D, building paper, and three coat cement plaster per testing report L-06-3059 from Smith-Emery Laboratories, Inc. using test method ASTM E331-00 WARRANTY: Bumperite Waterguards, LLC. liability expressed or implied is limited to the selling price of any defected goods. User shall determine the suitability of this product for the intended use by doing field test before using, and assumes all risk and liabilities in connection therewith. RECOMMENDED METHOD OF SEAL AT CONNECTION Patent Pending

Water tested to ASTM E 1105-00 & ASTM E 331-00 by Architectural Testing, Inc. Report No: 90353.01-701-43 WARRANTY: Bumperite Waterguards, LLC. liability expressed or implied is limited to the selling price of any defected goods. User shall determine the suitability of this product for the intended use by doing field test before using, and assumes all risk and liabilities in connection therewith. RECOMMENDED METHOD OF SEAL AT WOOD / STEEL FRAMED ANCHOR PLATE TO EXTERIOR WATER MANAGEMENT SYSTEM Patent Pending

Step by Step at wood / steel framed plates Patent Pending

BUMPERITE - VS - WIRE TIES Testing at Smith-Emery Laboratories suggest that the Bumperite Waterguard peak tension load is MANY TIMES STRONGER than conventional double strand #12 black annealed wire tie assemblies. OSHA 1926.451(c)(1) states, Capacity - - Scaffolds and scaffold components must support at least 4 times the maximum intended load. Sealable & strength Difficult to seal & weaker Patent Pending For More Information Please Contact Us At [email_address] Bumperite Waterguards, LLC. Toll free (877) 490-8884 See Our Web Site At Bumperite.com

Bumperite Catalogue #2

Recommended

Recommended

More Related Content

What's hot

What's hot (18)

Similar to Bumperite Catalogue #2

Similar to Bumperite Catalogue #2 (20)

Recently uploaded

Recently uploaded (20)

Bumperite Catalogue #2