Presentation.pptx
•Download as PPTX, PDF•
0 likes•13 views
This document provides an overview of fatty acid distillation. It begins by listing the sections of a fatty acid plant. It then discusses the composition of fatty acids in palm stearin. It explains that distillation separates components based on differences in boiling points. Fatty acid distillation purifies crude fatty acids produced from splitting and separates them into individual fatty acids. The main equipment used includes heat exchangers, dryers, reboilers, condensers, and pumps. Results from distillation runs provide data on feed and production flow rates, vacuum levels, and reflux rates.
Report
Share
Report
Share
Recommended
CH-04-Module-1-Fats, Oils and Detergents
The document discusses fats, oils, detergents and their analysis. It begins by defining fats and oils as glycerol esters of fatty acids. It describes the different types of fats and oils that occur in nature, including vegetable oils like olive oil and palm oil, and animal oils like whale oil and lard oil. It then discusses the manufacture of soybean oil using solvent extraction. The document concludes by explaining the analysis of fats and oils using tests like acid value, saponification value and iodine value. It also describes the different types of detergents like sodium alkyl sulfates and their cleansing action.
Separation techniques in oils & fats science
Novel Separation Techniques in Oil/Fats, Fatty acids and By products viz, sterols, tocopherols etc.
Chromatographic techniques, urea inclusion and exclusion, distillation, fractionation, crystallization etc
Application Report - Glycerine
Glycerine: Basics, usage & the advantages of SHORTBOWL Decanter Centrifuges.
Glycerine is an organic compound from the group of sugar alcohols. It is used in various industries, e.g. in the food industry, cosmetics or medicine.
Lipid
This document summarizes the key characteristics and types of lipids. Lipids are insoluble in water but soluble in non-polar solvents. The main types of lipids discussed include fatty acids, neutral fats and oils, waxes, phospholipids, sterols, and fat-soluble vitamins. Specific lipids like triglycerides, cholesterol, and various fatty acids are examined in detail. Analytical methods for analyzing lipids, such as acid value, saponification value, iodine number, gas chromatography, and enzymatic assays are also outlined.
Lipid more than sufficient
This document summarizes the key characteristics and types of lipids. Lipids are insoluble in water but soluble in non-polar solvents. The main types of lipids discussed include fatty acids, neutral fats and oils, waxes, phospholipids, sterols, and fat-soluble vitamins. Specific lipids like cholesterol are also examined. Analytical methods to study the properties of lipids such as acid value, saponification value, and iodine value are outlined.
TCPO PPT 07:12:22.pptx
The document discusses the physical refining processes for groundnut oil and coconut oil. It explains that physical refining aims to remove undesirable impurities like free fatty acids and phospholipids from crude oils using physical and chemical processes, while preserving valuable components. The key steps in physical refining include degumming to remove gums, bleaching to reduce color pigments and metals, and deodorization to remove odors and flavors. For groundnut oil specifically, the document outlines that alkali refining is commonly used, which involves gum conditioning, neutralization, bleaching, and deodorization.
Fatty acids
Fatty acids are the basic units of fat composed of hydrocarbon chains with a carboxyl group at one end. They can be saturated, containing only single bonds between carbon atoms, or unsaturated with one or more double bonds. Saturated fatty acids are solid at room temperature due to close packing, while unsaturated fatty acids are usually liquid due to kinks in their structure. Fatty acids are produced via hydrolysis of triglycerides from plants and animals, which involves splitting the triglyceride into glycerol and three fatty acid molecules. The fatty acids can then be purified by distillation and fractionation.
Newer Processing Methods for the Extraction and Refining Rice Bran Oil
Newer processing methods can improve the extraction and refining of rice bran oil. Modern techniques like enzymatic degumming and physical refining lower acid values and remove impurities. Winterization ensures a refined oil with a cloud point of 0°C. Rice bran oil contains beneficial compounds like oryzanol and has advantages over soy lecithin as an emulsifier. Extraction is followed by bleaching, dewaxing, and deodorization using specialized low-temperature distillation to minimize heat damage. By-products like rice bran wax and stearic acid have various industrial and nutritional uses. Continuous research and development helps optimize rice bran oil processing for high quality outputs.
Recommended
CH-04-Module-1-Fats, Oils and Detergents
The document discusses fats, oils, detergents and their analysis. It begins by defining fats and oils as glycerol esters of fatty acids. It describes the different types of fats and oils that occur in nature, including vegetable oils like olive oil and palm oil, and animal oils like whale oil and lard oil. It then discusses the manufacture of soybean oil using solvent extraction. The document concludes by explaining the analysis of fats and oils using tests like acid value, saponification value and iodine value. It also describes the different types of detergents like sodium alkyl sulfates and their cleansing action.
Separation techniques in oils & fats science
Novel Separation Techniques in Oil/Fats, Fatty acids and By products viz, sterols, tocopherols etc.
Chromatographic techniques, urea inclusion and exclusion, distillation, fractionation, crystallization etc
Application Report - Glycerine
Glycerine: Basics, usage & the advantages of SHORTBOWL Decanter Centrifuges.
Glycerine is an organic compound from the group of sugar alcohols. It is used in various industries, e.g. in the food industry, cosmetics or medicine.
Lipid
This document summarizes the key characteristics and types of lipids. Lipids are insoluble in water but soluble in non-polar solvents. The main types of lipids discussed include fatty acids, neutral fats and oils, waxes, phospholipids, sterols, and fat-soluble vitamins. Specific lipids like triglycerides, cholesterol, and various fatty acids are examined in detail. Analytical methods for analyzing lipids, such as acid value, saponification value, iodine number, gas chromatography, and enzymatic assays are also outlined.
Lipid more than sufficient
This document summarizes the key characteristics and types of lipids. Lipids are insoluble in water but soluble in non-polar solvents. The main types of lipids discussed include fatty acids, neutral fats and oils, waxes, phospholipids, sterols, and fat-soluble vitamins. Specific lipids like cholesterol are also examined. Analytical methods to study the properties of lipids such as acid value, saponification value, and iodine value are outlined.
TCPO PPT 07:12:22.pptx
The document discusses the physical refining processes for groundnut oil and coconut oil. It explains that physical refining aims to remove undesirable impurities like free fatty acids and phospholipids from crude oils using physical and chemical processes, while preserving valuable components. The key steps in physical refining include degumming to remove gums, bleaching to reduce color pigments and metals, and deodorization to remove odors and flavors. For groundnut oil specifically, the document outlines that alkali refining is commonly used, which involves gum conditioning, neutralization, bleaching, and deodorization.
Fatty acids
Fatty acids are the basic units of fat composed of hydrocarbon chains with a carboxyl group at one end. They can be saturated, containing only single bonds between carbon atoms, or unsaturated with one or more double bonds. Saturated fatty acids are solid at room temperature due to close packing, while unsaturated fatty acids are usually liquid due to kinks in their structure. Fatty acids are produced via hydrolysis of triglycerides from plants and animals, which involves splitting the triglyceride into glycerol and three fatty acid molecules. The fatty acids can then be purified by distillation and fractionation.
Newer Processing Methods for the Extraction and Refining Rice Bran Oil
Newer processing methods can improve the extraction and refining of rice bran oil. Modern techniques like enzymatic degumming and physical refining lower acid values and remove impurities. Winterization ensures a refined oil with a cloud point of 0°C. Rice bran oil contains beneficial compounds like oryzanol and has advantages over soy lecithin as an emulsifier. Extraction is followed by bleaching, dewaxing, and deodorization using specialized low-temperature distillation to minimize heat damage. By-products like rice bran wax and stearic acid have various industrial and nutritional uses. Continuous research and development helps optimize rice bran oil processing for high quality outputs.
Production and Analysis of Chemical Properties of Chicken Fat Based Biodiesel...
This document summarizes a study on the production and analysis of chemical properties of chicken fat-based biodiesel and its blends. Key findings include:
- Chicken fat was converted to biodiesel using a heterogeneous base catalyst (calcium oxide) in a transesterification reaction.
- The chemical properties of the pure chicken fat biodiesel (B100) and its blends (B10, B15, B20, B25, B30) with petrodiesel were analyzed and found to meet biodiesel standards.
- B10 blend had a higher calorific value and lower density than the other blends. B100 had a higher flash point and better oxidation
Possibilities and Potentiality to increase-blending-ratio- of palm olein wit...
Possibilities and Potentiality to increase-blending-ratio- of palm olein wit...Adel Gabr Abdel-Razek
This document discusses increasing the blending ratio of palm olein with soft oils in the Egyptian market. It provides an overview of Egypt's oils and fats profile, the role of frying in food processing, strategies to improve oxidative stability through blending, and recommendations. Blending palm olein with oils like soybean oil can improve various properties including oxidative stability, color, and fatty acid balance. The document recommends that Egyptian manufacturers work with palm oil experts to increase palm olein ratios in blends while avoiding winter precipitation, and educate consumers on palm olein's properties as a frying oil.Choosing the right oil or fat
This document discusses various culinary oils and their fatty acid compositions. It notes that replacing just 5% of daily saturated fat intake with polyunsaturated fat could lower heart disease risk by 10%. Different oils are better suited for different culinary purposes like frying or baking due to their stability and oxidation properties. Nutritional properties, cost, and quality must all be considered when selecting oils.
Choosing the right oil or fat
This document discusses various types of oils and fats, their properties, uses, and health impacts. It notes that certain oils higher in monounsaturated and polyunsaturated fats like hazelnut, walnut, olive and flaxseed oils are preferable to consume due to their positive health effects when used in moderation. It also warns that partially hydrogenated oils contain unhealthy trans fats and that overconsumption of saturated fats is linked to increased risk of cardiovascular disease.
LIPIDS
This document provides information on the functions, properties, and importance of lipids. It begins by discussing the structure of lipids and classification of fatty acids. It then covers various chemical properties of lipids including hydrolysis, saponification, hydrogenation, and rancidity. Physical properties such as hydrophobicity and melting points are also described. The functions of saturated, unsaturated, and essential lipids are outlined. Finally, the structural, clinical, and disease importance of lipids is summarized, highlighting their roles in cell membranes, energy storage, insulation, and brain injury/lipidosis.
Effluent from petroleum refineries
processes in a petroleum refinery, how and from where the waste is generated, characteristics of the effluent, treatment of the waste.
PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD PALM KERNEL ...
PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD PALM KERNEL ...SAJJAD KHUDHUR ABBAS
OBJECTIVES
To produce 60,000 MTPA of methyl esters from RBD palm kernel oil.
To achieve the production of methyl esters by using homogeneous base-catalyzed transesterification method with sodium methoxide (NaOCH3) as catalyst.
BR-70701-LC-GC-NIR-ICP-Edible-Oil-Workflows
This document discusses analytical workflows for edible oil production and quality assurance. It describes key steps in edible oil production including seed preparation, extraction, refining, bleaching and deodorizing. It then summarizes several analytical techniques - near infrared spectroscopy (NIR), liquid chromatography (LC), gas chromatography (GC) and inductively coupled plasma-optical emission spectroscopy (ICP-OES) - that can be used at various stages for applications like raw material identification, compositional analysis, contaminant testing and additive analysis. Specific examples are given showing how these techniques can be used to analyze elements, triglycerides, fatty acids, Sudan dyes, PAHs, pesticides and antioxidants in edible oils.
Biodiesel production
The document discusses four methods of biodiesel production: pyrolysis, micro-emulsification, dilution, and transesterification. It focuses on describing the transesterification process, which involves reacting triglycerides with an alcohol in the presence of an acid, alkaline, or lipase catalyst. This produces mono alkyl esters (biodiesel) and glycerol. Alkaline catalysis is described as the fastest method and simplest setup. The document provides details of the catalytic transesterification reaction and separation of biodiesel and glycerol layers.
Treatment of Industrial Oily Waste Water
The document summarizes a study on treating oily wastewater from a metal industry's cutting fluid in Indore City, India. The study tested various coagulants for removing total suspended solids (TSS), total dissolved solids (TDS), and oil and grease. Poly aluminum chloride was found to be the most effective coagulant, removing up to 89.6% of TSS, 42.2% of TDS, and 88.8% of oil and grease. Acidification of the wastewater to pH 4 prior to coagulation treatment was found to maximize oil removal. The study concludes that chemical treatment using coagulation after acidification is an effective way to remove contaminants from o
Synthesis, Characterization and Performance Evaluation of Poly Octadecyl Meth...
Methacrylate polymers are widely used as additives in lubricating oils, as pour point depressants and viscosity index improvers. In this study, homopolymer of Octadecyl methacrylate and Octadecyl methacrylate_co_methylmethacrylate with molar ratios of 30:70, 50:50 and 70:30 were synthesized and characterized. The free radical polymerization was carried out at 70 °C in toluene solvent and 2, 2′- azobisisobutyronitrile (AIBN) as initiator. All products were characterized by FTIR, 1H-NMR and gel permeation chromatography (GPC). The obtained results showed the efficacy of the additives as viscosity index improvers, pour point depressants. The pour points of most base oils containing each polymer decreased compared to that of the pure base oil. 70% octadecyl methacrylate units showed a 15Cᵒ reduction in their pour points, thus establishing the large efficiency of the products synthesized in this work. The efficiencies of the prepared compounds as viscosity index improvers were investigated. It was found that the efficiency of the prepared compound as viscosity index improvers increases with increasing the concentration of additives.
Phytochemical Processing
The document discusses various phytochemical processing techniques including extraction, purification, and case studies. It provides charts classifying extraction methods based on solvent polarity and examples of raw herbal materials. Case studies examine specific processes for producing products like cinnamon oil, tongkat ali extract, soybean powder, curcuminoid, stevia sugar, and pegaga powder.
Fatty Acid Isolation (Unit 4 a)
The document discusses various methods for isolating fatty acids and glycerine from triglycerides including chemical and enzymatic modifications. Chemical modifications include transesterification, hydrolysis, aminolysis, and saponification. Transesterification is used to produce biodiesel and involves a reaction of triglycerides with an alcohol like methanol. Enzymatic modifications use lipases to selectively modify triglycerides in ways that cannot be achieved with chemical modifications. Overall, the document provides an overview of important industrial processes for separating fatty acids and glycerine from oils and fats.
Episode 4: PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD P...
Episode 4: PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD P...SAJJAD KHUDHUR ABBAS
Episode 4: PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD PALM KERNEL OIL
Micro-emulsion
Process of reducing the viscosity of vegetable oil by the means of solvent (methanol, ethanol as well as normal butanol).Biodiesel production
The document summarizes various processes for biodiesel production, with a focus on transesterification. It describes four main methods - pyrolysis, micro-emulsification, dilution, and transesterification. Transesterification, which is the reaction of triglycerides with alcohol in the presence of an acid or base catalyst, is identified as the most common industrial process. The key steps of transesterification including catalyst selection, reaction conditions, and separation of biodiesel and glycerol are outlined. Post-production processes like refining, washing, drying and additive treatment are also summarized to purify the biodiesel and meet fuel standards.
Pathapati Bioprocessing Symposium 2011
The document discusses converting tall oil, a byproduct of the pulp and paper industry, into renewable diesel and biodiesel. Tall oil is an abundant and inexpensive feedstock that can help address issues with more common biofuel feedstocks like corn and palm oil. The researchers tested cracking crude tall oil and its fraction tall oil fatty acids over a ZSM-5 catalyst using a GC-MS system. Cracking both the crude tall oil and tall oil fatty acids produced fuel-range compounds and reduced coke formation on the catalyst compared to previous feedstocks. This demonstrates that tall oil has potential as a renewable alternative feedstock for producing biofuels through traditional refinery processes.
Pathapati- bioprocessing symposium 2011
The document discusses converting tall oil, a byproduct of the pulp and paper industry, into renewable diesel and biodiesel. Tall oil is an abundant and inexpensive feedstock that can help address issues with more common biofuel feedstocks like corn and palm oil. The researchers tested cracking crude tall oil and its fraction tall oil fatty acids over a ZSM-5 catalyst using a GC-MS system. Cracking both the crude tall oil and tall oil fatty acids produced fuel-range compounds and reduced coke formation on the catalyst compared to previous feedstocks. This demonstrates that tall oil has potential as a renewable alternative feedstock for producing biofuels through traditional refinery processes.
Oil and fat processing
This document discusses oil and fat processing, specifically refining of oils and fats. It describes the major steps in refining which include lecithin removal, degumming, neutralization, bleaching, and deodorization. The purpose of refining is to remove undesirable components from crude oils and produce an edible oil with desirable characteristics like clear appearance and stability. Key steps include degumming to remove phospholipids, neutralization to remove free fatty acids, bleaching to remove color, and deodorization to remove odors and flavors through steam distillation under vacuum. Proper processing refines crude oils into finished oils suitable for human consumption.
Rajat tiwari, 2 k14 214, 10.4-10.7-1
The document describes the lube oil manufacturing process. It discusses four key processes: solvent deasphalting, solvent extraction, solvent dewaxing, and hydrofinishing. Solvent deasphalting uses propane to extract oils from vacuum residues and produce bright stocks. Solvent extraction commonly uses furfural, NMP, or phenol to remove aromatics from lube oil fractions. Solvent dewaxing uses ketone solvents like MEK to crystallize and remove waxy components. Hydrofinishing catalytically reacts undesirable components like sulfur with hydrogen to improve stability. Process conditions and typical yields are provided for each step.
Animal fat process final ppt.
This document discusses animal by-products and their utilization. It notes that 50% of slaughtered animals are converted into by-products rich in protein and fat. These by-products contribute value and are used in foods, pet foods, livestock feeds, and fertilizers. The key process for stabilizing raw materials is rendering, which involves applying heat to evaporate water and sterilize the material. Rendering produces various products like meat, gelatin, edible fats, and pet food ingredients. The document also discusses the properties and uses of different animal fats.
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
The Network on Chip (NoC) has emerged as an effective
solution for intercommunication infrastructure within System on
Chip (SoC) designs, overcoming the limitations of traditional
methods that face significant bottlenecks. However, the complexity
of NoC design presents numerous challenges related to
performance metrics such as scalability, latency, power
consumption, and signal integrity. This project addresses the
issues within the router's memory unit and proposes an enhanced
memory structure. To achieve efficient data transfer, FIFO buffers
are implemented in distributed RAM and virtual channels for
FPGA-based NoC. The project introduces advanced FIFO-based
memory units within the NoC router, assessing their performance
in a Bi-directional NoC (Bi-NoC) configuration. The primary
objective is to reduce the router's workload while enhancing the
FIFO internal structure. To further improve data transfer speed,
a Bi-NoC with a self-configurable intercommunication channel is
suggested. Simulation and synthesis results demonstrate
guaranteed throughput, predictable latency, and equitable
network access, showing significant improvement over previous
designs
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
More Related Content
Similar to Presentation.pptx
Production and Analysis of Chemical Properties of Chicken Fat Based Biodiesel...
This document summarizes a study on the production and analysis of chemical properties of chicken fat-based biodiesel and its blends. Key findings include:
- Chicken fat was converted to biodiesel using a heterogeneous base catalyst (calcium oxide) in a transesterification reaction.
- The chemical properties of the pure chicken fat biodiesel (B100) and its blends (B10, B15, B20, B25, B30) with petrodiesel were analyzed and found to meet biodiesel standards.
- B10 blend had a higher calorific value and lower density than the other blends. B100 had a higher flash point and better oxidation
Possibilities and Potentiality to increase-blending-ratio- of palm olein wit...
Possibilities and Potentiality to increase-blending-ratio- of palm olein wit...Adel Gabr Abdel-Razek
This document discusses increasing the blending ratio of palm olein with soft oils in the Egyptian market. It provides an overview of Egypt's oils and fats profile, the role of frying in food processing, strategies to improve oxidative stability through blending, and recommendations. Blending palm olein with oils like soybean oil can improve various properties including oxidative stability, color, and fatty acid balance. The document recommends that Egyptian manufacturers work with palm oil experts to increase palm olein ratios in blends while avoiding winter precipitation, and educate consumers on palm olein's properties as a frying oil.Choosing the right oil or fat
This document discusses various culinary oils and their fatty acid compositions. It notes that replacing just 5% of daily saturated fat intake with polyunsaturated fat could lower heart disease risk by 10%. Different oils are better suited for different culinary purposes like frying or baking due to their stability and oxidation properties. Nutritional properties, cost, and quality must all be considered when selecting oils.
Choosing the right oil or fat
This document discusses various types of oils and fats, their properties, uses, and health impacts. It notes that certain oils higher in monounsaturated and polyunsaturated fats like hazelnut, walnut, olive and flaxseed oils are preferable to consume due to their positive health effects when used in moderation. It also warns that partially hydrogenated oils contain unhealthy trans fats and that overconsumption of saturated fats is linked to increased risk of cardiovascular disease.
LIPIDS
This document provides information on the functions, properties, and importance of lipids. It begins by discussing the structure of lipids and classification of fatty acids. It then covers various chemical properties of lipids including hydrolysis, saponification, hydrogenation, and rancidity. Physical properties such as hydrophobicity and melting points are also described. The functions of saturated, unsaturated, and essential lipids are outlined. Finally, the structural, clinical, and disease importance of lipids is summarized, highlighting their roles in cell membranes, energy storage, insulation, and brain injury/lipidosis.
Effluent from petroleum refineries
processes in a petroleum refinery, how and from where the waste is generated, characteristics of the effluent, treatment of the waste.
PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD PALM KERNEL ...
PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD PALM KERNEL ...SAJJAD KHUDHUR ABBAS
OBJECTIVES
To produce 60,000 MTPA of methyl esters from RBD palm kernel oil.
To achieve the production of methyl esters by using homogeneous base-catalyzed transesterification method with sodium methoxide (NaOCH3) as catalyst.
BR-70701-LC-GC-NIR-ICP-Edible-Oil-Workflows
This document discusses analytical workflows for edible oil production and quality assurance. It describes key steps in edible oil production including seed preparation, extraction, refining, bleaching and deodorizing. It then summarizes several analytical techniques - near infrared spectroscopy (NIR), liquid chromatography (LC), gas chromatography (GC) and inductively coupled plasma-optical emission spectroscopy (ICP-OES) - that can be used at various stages for applications like raw material identification, compositional analysis, contaminant testing and additive analysis. Specific examples are given showing how these techniques can be used to analyze elements, triglycerides, fatty acids, Sudan dyes, PAHs, pesticides and antioxidants in edible oils.
Biodiesel production
The document discusses four methods of biodiesel production: pyrolysis, micro-emulsification, dilution, and transesterification. It focuses on describing the transesterification process, which involves reacting triglycerides with an alcohol in the presence of an acid, alkaline, or lipase catalyst. This produces mono alkyl esters (biodiesel) and glycerol. Alkaline catalysis is described as the fastest method and simplest setup. The document provides details of the catalytic transesterification reaction and separation of biodiesel and glycerol layers.
Treatment of Industrial Oily Waste Water
The document summarizes a study on treating oily wastewater from a metal industry's cutting fluid in Indore City, India. The study tested various coagulants for removing total suspended solids (TSS), total dissolved solids (TDS), and oil and grease. Poly aluminum chloride was found to be the most effective coagulant, removing up to 89.6% of TSS, 42.2% of TDS, and 88.8% of oil and grease. Acidification of the wastewater to pH 4 prior to coagulation treatment was found to maximize oil removal. The study concludes that chemical treatment using coagulation after acidification is an effective way to remove contaminants from o
Synthesis, Characterization and Performance Evaluation of Poly Octadecyl Meth...
Methacrylate polymers are widely used as additives in lubricating oils, as pour point depressants and viscosity index improvers. In this study, homopolymer of Octadecyl methacrylate and Octadecyl methacrylate_co_methylmethacrylate with molar ratios of 30:70, 50:50 and 70:30 were synthesized and characterized. The free radical polymerization was carried out at 70 °C in toluene solvent and 2, 2′- azobisisobutyronitrile (AIBN) as initiator. All products were characterized by FTIR, 1H-NMR and gel permeation chromatography (GPC). The obtained results showed the efficacy of the additives as viscosity index improvers, pour point depressants. The pour points of most base oils containing each polymer decreased compared to that of the pure base oil. 70% octadecyl methacrylate units showed a 15Cᵒ reduction in their pour points, thus establishing the large efficiency of the products synthesized in this work. The efficiencies of the prepared compounds as viscosity index improvers were investigated. It was found that the efficiency of the prepared compound as viscosity index improvers increases with increasing the concentration of additives.
Phytochemical Processing
The document discusses various phytochemical processing techniques including extraction, purification, and case studies. It provides charts classifying extraction methods based on solvent polarity and examples of raw herbal materials. Case studies examine specific processes for producing products like cinnamon oil, tongkat ali extract, soybean powder, curcuminoid, stevia sugar, and pegaga powder.
Fatty Acid Isolation (Unit 4 a)
The document discusses various methods for isolating fatty acids and glycerine from triglycerides including chemical and enzymatic modifications. Chemical modifications include transesterification, hydrolysis, aminolysis, and saponification. Transesterification is used to produce biodiesel and involves a reaction of triglycerides with an alcohol like methanol. Enzymatic modifications use lipases to selectively modify triglycerides in ways that cannot be achieved with chemical modifications. Overall, the document provides an overview of important industrial processes for separating fatty acids and glycerine from oils and fats.
Episode 4: PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD P...
Episode 4: PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD P...SAJJAD KHUDHUR ABBAS
Episode 4: PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD PALM KERNEL OIL
Micro-emulsion
Process of reducing the viscosity of vegetable oil by the means of solvent (methanol, ethanol as well as normal butanol).Biodiesel production
The document summarizes various processes for biodiesel production, with a focus on transesterification. It describes four main methods - pyrolysis, micro-emulsification, dilution, and transesterification. Transesterification, which is the reaction of triglycerides with alcohol in the presence of an acid or base catalyst, is identified as the most common industrial process. The key steps of transesterification including catalyst selection, reaction conditions, and separation of biodiesel and glycerol are outlined. Post-production processes like refining, washing, drying and additive treatment are also summarized to purify the biodiesel and meet fuel standards.
Pathapati Bioprocessing Symposium 2011
The document discusses converting tall oil, a byproduct of the pulp and paper industry, into renewable diesel and biodiesel. Tall oil is an abundant and inexpensive feedstock that can help address issues with more common biofuel feedstocks like corn and palm oil. The researchers tested cracking crude tall oil and its fraction tall oil fatty acids over a ZSM-5 catalyst using a GC-MS system. Cracking both the crude tall oil and tall oil fatty acids produced fuel-range compounds and reduced coke formation on the catalyst compared to previous feedstocks. This demonstrates that tall oil has potential as a renewable alternative feedstock for producing biofuels through traditional refinery processes.
Pathapati- bioprocessing symposium 2011
The document discusses converting tall oil, a byproduct of the pulp and paper industry, into renewable diesel and biodiesel. Tall oil is an abundant and inexpensive feedstock that can help address issues with more common biofuel feedstocks like corn and palm oil. The researchers tested cracking crude tall oil and its fraction tall oil fatty acids over a ZSM-5 catalyst using a GC-MS system. Cracking both the crude tall oil and tall oil fatty acids produced fuel-range compounds and reduced coke formation on the catalyst compared to previous feedstocks. This demonstrates that tall oil has potential as a renewable alternative feedstock for producing biofuels through traditional refinery processes.
Oil and fat processing
This document discusses oil and fat processing, specifically refining of oils and fats. It describes the major steps in refining which include lecithin removal, degumming, neutralization, bleaching, and deodorization. The purpose of refining is to remove undesirable components from crude oils and produce an edible oil with desirable characteristics like clear appearance and stability. Key steps include degumming to remove phospholipids, neutralization to remove free fatty acids, bleaching to remove color, and deodorization to remove odors and flavors through steam distillation under vacuum. Proper processing refines crude oils into finished oils suitable for human consumption.
Rajat tiwari, 2 k14 214, 10.4-10.7-1
The document describes the lube oil manufacturing process. It discusses four key processes: solvent deasphalting, solvent extraction, solvent dewaxing, and hydrofinishing. Solvent deasphalting uses propane to extract oils from vacuum residues and produce bright stocks. Solvent extraction commonly uses furfural, NMP, or phenol to remove aromatics from lube oil fractions. Solvent dewaxing uses ketone solvents like MEK to crystallize and remove waxy components. Hydrofinishing catalytically reacts undesirable components like sulfur with hydrogen to improve stability. Process conditions and typical yields are provided for each step.
Animal fat process final ppt.
This document discusses animal by-products and their utilization. It notes that 50% of slaughtered animals are converted into by-products rich in protein and fat. These by-products contribute value and are used in foods, pet foods, livestock feeds, and fertilizers. The key process for stabilizing raw materials is rendering, which involves applying heat to evaporate water and sterilize the material. Rendering produces various products like meat, gelatin, edible fats, and pet food ingredients. The document also discusses the properties and uses of different animal fats.
Similar to Presentation.pptx (20)
Production and Analysis of Chemical Properties of Chicken Fat Based Biodiesel...
Production and Analysis of Chemical Properties of Chicken Fat Based Biodiesel...
Possibilities and Potentiality to increase-blending-ratio- of palm olein wit...
Possibilities and Potentiality to increase-blending-ratio- of palm olein wit...
PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD PALM KERNEL ...
PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD PALM KERNEL ...
Synthesis, Characterization and Performance Evaluation of Poly Octadecyl Meth...
Synthesis, Characterization and Performance Evaluation of Poly Octadecyl Meth...
Episode 4: PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD P...
Episode 4: PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD P...
Recently uploaded
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
The Network on Chip (NoC) has emerged as an effective
solution for intercommunication infrastructure within System on
Chip (SoC) designs, overcoming the limitations of traditional
methods that face significant bottlenecks. However, the complexity
of NoC design presents numerous challenges related to
performance metrics such as scalability, latency, power
consumption, and signal integrity. This project addresses the
issues within the router's memory unit and proposes an enhanced
memory structure. To achieve efficient data transfer, FIFO buffers
are implemented in distributed RAM and virtual channels for
FPGA-based NoC. The project introduces advanced FIFO-based
memory units within the NoC router, assessing their performance
in a Bi-directional NoC (Bi-NoC) configuration. The primary
objective is to reduce the router's workload while enhancing the
FIFO internal structure. To further improve data transfer speed,
a Bi-NoC with a self-configurable intercommunication channel is
suggested. Simulation and synthesis results demonstrate
guaranteed throughput, predictable latency, and equitable
network access, showing significant improvement over previous
designs
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Object Oriented Analysis and Design - OOAD
This ppt gives detailed description of Object Oriented Analysis and design.
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Accident detection system project report.pdf
The Rapid growth of technology and infrastructure has made our lives easier. The
advent of technology has also increased the traffic hazards and the road accidents take place
frequently which causes huge loss of life and property because of the poor emergency facilities.
Many lives could have been saved if emergency service could get accident information and
reach in time. Our project will provide an optimum solution to this draw back. A piezo electric
sensor can be used as a crash or rollover detector of the vehicle during and after a crash. With
signals from a piezo electric sensor, a severe accident can be recognized. According to this
project when a vehicle meets with an accident immediately piezo electric sensor will detect the
signal or if a car rolls over. Then with the help of GSM module and GPS module, the location
will be sent to the emergency contact. Then after conforming the location necessary action will
be taken. If the person meets with a small accident or if there is no serious threat to anyone’s
life, then the alert message can be terminated by the driver by a switch provided in order to
avoid wasting the valuable time of the medical rescue team.
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
Determination of Equivalent Circuit parameters and performance characteristic...
Includes the testing of induction motor to draw the circle diagram of induction motor with step wise procedure and calculation for the same. Also explains the working and application of Induction generator
Levelised Cost of Hydrogen (LCOH) Calculator Manual
The aim of this manual is to explain the
methodology behind the Levelized Cost of
Hydrogen (LCOH) calculator. Moreover, this
manual also demonstrates how the calculator
can be used for estimating the expenses associated with hydrogen production in Europe
using low-temperature electrolysis considering different sources of electricity
FULL STACK PROGRAMMING - Both Front End and Back End
This ppt gives details about Full Stack Programming and its basics.
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
The need for ecofriendly materials as building materials in this century cannot be overemphasized
Digital Twins Computer Networking Paper Presentation.pptx
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
Assistant Engineer (Chemical) Interview Questions.pdf
These are interview questions for the post of Assistant Engineer (Chemical)
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Presentation on Food Delivery Systems
This presentation is about Food Delivery Systems and how they are developed using the Software Development Life Cycle (SDLC) and other methods. It explains the steps involved in creating a food delivery app, from planning and designing to testing and launching. The slide also covers different tools and technologies used to make these systems work efficiently.
Butterfly Valves Manufacturer (LBF Series).pdf
We have designed & manufacture the Lubi Valves LBF series type of Butterfly Valves for General Utility Water applications as well as for HVAC applications.
Recently uploaded (20)
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
Determination of Equivalent Circuit parameters and performance characteristic...
Determination of Equivalent Circuit parameters and performance characteristic...
Levelised Cost of Hydrogen (LCOH) Calculator Manual
Levelised Cost of Hydrogen (LCOH) Calculator Manual
FULL STACK PROGRAMMING - Both Front End and Back End
FULL STACK PROGRAMMING - Both Front End and Back End
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
Digital Twins Computer Networking Paper Presentation.pptx
Digital Twins Computer Networking Paper Presentation.pptx
Assistant Engineer (Chemical) Interview Questions.pdf
Assistant Engineer (Chemical) Interview Questions.pdf
EV BMS WITH CHARGE MONITOR AND FIRE DETECTION.pptx
EV BMS WITH CHARGE MONITOR AND FIRE DETECTION.pptx
Presentation.pptx
- 2. Objective To Convey Fatty Acid Plant and all its sections Tank yard Hydrogenation Splitting Distillation Flakes formation Glycerine Plant What actually distillation is? The basic principle Fatty acid distillation Why is fatty acid distillation done? Main equipments used here P&ID Results
- 4. Fatty acids and their composition in palm stearin A carboxylic acid with a long aliphatic chain Either saturated or unsaturated Lauric acid(C12:0) Myristic acid(C14:0) Palmitic acid(C16:0) Stearic acid(C18:0) Oleic acid (C18:1) Linoleic acid(C18:2) Linolenic acid(C18:3) Arachidic acid(C20:0)
- 5. Distillation & Principle Distillation is process of separating the selective components from the liquid mixture by selective evaporation and condensation. The basic principle is that “different liquids boil and evaporate at different temperatures.So,when the mixture is heated, the substance with lower boiling point starts to boil first and convert into vapours.”
- 6. Fatty Acid Distillation and why it is done? Distillation process makes use of the differences in boiling points between the desired fatty acids and the impurities, to effect a separation of these components. Crude fatty acids produced from fats splitting process are purified by distillation, and can be separated further into individual fatty acids by fractional distillation. Fatty acid distillation is carried out under reduced pressure (vacuum) and lowest possible temperature to ensure product stability,to improve colour and to enhance the purity of product. In the distillation, the fatty acids are vaporized and then condensed, leaving the high-boiling impurities (residue) in the distillation still.
- 7. Main Equipments Shell and tube heat exchangers Plate type heat exchangers Dryer Reboiler
- 8. Main Equipments Condenser Barometric condenserr Scrubber Centrifugal Pump
- 9. Results Feed Flow rate (Kg/hr) Production flow rate (kg/hr) Top vacuum(m bar) HTO pump suction(Bar) HTO pump discharge pressure (Bar) Reflux flow rate (Kg/hr) 3653 4059 09 3.8 4.1 138 3699 4111 10 3.8 4.1 141 3600 4000 08 3.9 4.1 140 3600 4100 08 3.9 4.1 140
- 10. P&ID
- 11. References M.R. Resetarits, M.J. Lockett, in Encyclopedia of Physical Science and Technology (Third Edition), 2003 J.D. Green, in Encyclopedia of Analytical Science (Second Edition), 2005
- 12. Thank You