Presentation on e&i supports
•Download as PPT, PDF•
0 likes•716 views
1. The document discusses rework carried out to install electrical equipment supports, cable tray supports, earth bosses, pipe penetrations, and ceiling lights after completion of painting. 2. It recommends using pop-nuts and unistrut instead of welding to install additional supports after painting to avoid damage to the paint and insulation. 3. Insulation was removed in some areas to weld electrical supports and cable tray supports after completion of internal insulation work.
Report
Share
Report
Share
Recommended
Design of buildings in cyclone prone areas
This document discusses design considerations for buildings in cyclone-prone areas. It begins with an introduction to cyclones, noting they cause strong winds and rains. It then discusses various cyclone characteristics like formation, structure with an eye, and coastal impacts. Several key aspects for building design are covered, including roofing, wall-roof junctions, doors/windows, foundations, and walls. Reinforcing these vulnerable areas is recommended through techniques like additional bracing, straps, and reinforced connections. Site selection factors are also outlined, such as using natural shields from hills or trees and avoiding ridges. The overall document provides guidance on strengthening building construction against high winds and flooding from cyclones.
BSCI 2300
Air barrier paper is a sheet material that is permeable to water vapor but not air or liquid water. It protects structures from weather to prevent interior mildew and corrosion, and reduces energy usage by limiting airflow.
Attic ventilation includes soffit vents at the eave to intake air, ridge vents at the peak to exhaust air, gable vents high in walls to create cross drafts, and roof turbines that use wind to expel moist air.
A backhoe is equipment used for excavation consisting of a 30-inch wide digging bucket on an articulated arm.
Visual Dictionary
This visual dictionary provides definitions and descriptions of various construction materials and components. It includes entries on air barriers, attic ventilation components, backhoes, batter boards, brick bonds, bulldozers, cladding materials, code requirements, concrete joints, concrete masonry units, decorative concrete blocks, doors, electrical components, framing elements, front end loaders, gypsum board, heat pumps, insulation materials, lintels, mortar joints, oriented strand board, plumbing fixtures, plywood, radiant barriers, rebar, roof drainage components, roof materials, roof shapes, roof terms, stone patterns, vapor retarders, waterproofing, weep holes, welded wire fabric, and windows.
Visual Dictionary-Substrate
This document defines and describes various building materials and components. It includes definitions of air barrier paper, different types of attic ventilation such as soffit vents and ridge vents, and machinery like backhoes and bulldozers. It also covers framing elements, doors, windows, electrical components, insulation, plumbing fixtures, roofing materials and terms, masonry units, and other construction topics. Each entry provides a brief description and relevant details about the item.
Pitched Roof
This document provides guidance on designing and constructing pitched roofs. It covers topics such as:
- Design standards that pitched roofs must meet, including supporting loads and statutory requirements.
- Types of roof structures like trussed rafter roofs and traditional cut roofs, and design considerations for each.
- Materials used in pitched roofs like structural timber, roofing materials, and treatment to ensure durability.
- Sitework activities for pitched roofs including wall plates, bracing, installing trussed rafters and roofing materials.
It includes several appendices with details like roof tile fixings, bracing requirements, tank supports, and batten sizes.
Visual dictionary-Vault
This document provides definitions and descriptions of various construction materials and components. It discusses air barriers, attic ventilation components like soffit vents and ridge vents, backhoes, types of brick bonds and positions, brick sizes, bulldozers, cladding materials, code requirements for egress windows and stair treads/risers, concrete control joints, CMU blocks, decorative CMU, door components, electrical components like transformers and meters, framing elements, front end loaders, heat pumps and compressors, insulation materials, lintels, mortar joints, oriented strand board, plumbing fixtures, rebar, roof drainage components, steep roof materials and shapes, roof terms, stone types, vapor retard
Passive House for New Orleans
Paul Dowsett of Sustainable.TO architects showcases his competition winning design for an affordable super-energy efficient home for New Orleans.
Roof types
The document discusses different types of roofs and roofing materials. It begins by defining a roof as the uppermost part of a building that provides protection from weather elements. It then classifies roofs based on their shape, including flat roofs used in areas with low rainfall, curved shells for large spaces, and pitched roofs for heavy rainfall areas. Various pitched roof forms are outlined such as gable, hip, shed, and gambrel styles. Common roofing materials include thatch, wood shingles, tiles, asbestos cement sheets, galvanized iron, and lightweight options. The purposes, advantages, and installation of these materials are described.
Recommended
Design of buildings in cyclone prone areas
This document discusses design considerations for buildings in cyclone-prone areas. It begins with an introduction to cyclones, noting they cause strong winds and rains. It then discusses various cyclone characteristics like formation, structure with an eye, and coastal impacts. Several key aspects for building design are covered, including roofing, wall-roof junctions, doors/windows, foundations, and walls. Reinforcing these vulnerable areas is recommended through techniques like additional bracing, straps, and reinforced connections. Site selection factors are also outlined, such as using natural shields from hills or trees and avoiding ridges. The overall document provides guidance on strengthening building construction against high winds and flooding from cyclones.
BSCI 2300
Air barrier paper is a sheet material that is permeable to water vapor but not air or liquid water. It protects structures from weather to prevent interior mildew and corrosion, and reduces energy usage by limiting airflow.
Attic ventilation includes soffit vents at the eave to intake air, ridge vents at the peak to exhaust air, gable vents high in walls to create cross drafts, and roof turbines that use wind to expel moist air.
A backhoe is equipment used for excavation consisting of a 30-inch wide digging bucket on an articulated arm.
Visual Dictionary
This visual dictionary provides definitions and descriptions of various construction materials and components. It includes entries on air barriers, attic ventilation components, backhoes, batter boards, brick bonds, bulldozers, cladding materials, code requirements, concrete joints, concrete masonry units, decorative concrete blocks, doors, electrical components, framing elements, front end loaders, gypsum board, heat pumps, insulation materials, lintels, mortar joints, oriented strand board, plumbing fixtures, plywood, radiant barriers, rebar, roof drainage components, roof materials, roof shapes, roof terms, stone patterns, vapor retarders, waterproofing, weep holes, welded wire fabric, and windows.
Visual Dictionary-Substrate
This document defines and describes various building materials and components. It includes definitions of air barrier paper, different types of attic ventilation such as soffit vents and ridge vents, and machinery like backhoes and bulldozers. It also covers framing elements, doors, windows, electrical components, insulation, plumbing fixtures, roofing materials and terms, masonry units, and other construction topics. Each entry provides a brief description and relevant details about the item.
Pitched Roof
This document provides guidance on designing and constructing pitched roofs. It covers topics such as:
- Design standards that pitched roofs must meet, including supporting loads and statutory requirements.
- Types of roof structures like trussed rafter roofs and traditional cut roofs, and design considerations for each.
- Materials used in pitched roofs like structural timber, roofing materials, and treatment to ensure durability.
- Sitework activities for pitched roofs including wall plates, bracing, installing trussed rafters and roofing materials.
It includes several appendices with details like roof tile fixings, bracing requirements, tank supports, and batten sizes.
Visual dictionary-Vault
This document provides definitions and descriptions of various construction materials and components. It discusses air barriers, attic ventilation components like soffit vents and ridge vents, backhoes, types of brick bonds and positions, brick sizes, bulldozers, cladding materials, code requirements for egress windows and stair treads/risers, concrete control joints, CMU blocks, decorative CMU, door components, electrical components like transformers and meters, framing elements, front end loaders, heat pumps and compressors, insulation materials, lintels, mortar joints, oriented strand board, plumbing fixtures, rebar, roof drainage components, steep roof materials and shapes, roof terms, stone types, vapor retard
Passive House for New Orleans
Paul Dowsett of Sustainable.TO architects showcases his competition winning design for an affordable super-energy efficient home for New Orleans.
Roof types
The document discusses different types of roofs and roofing materials. It begins by defining a roof as the uppermost part of a building that provides protection from weather elements. It then classifies roofs based on their shape, including flat roofs used in areas with low rainfall, curved shells for large spaces, and pitched roofs for heavy rainfall areas. Various pitched roof forms are outlined such as gable, hip, shed, and gambrel styles. Common roofing materials include thatch, wood shingles, tiles, asbestos cement sheets, galvanized iron, and lightweight options. The purposes, advantages, and installation of these materials are described.
Double roof structure
A double roof is a roof structure that requires an intermediate support beam halfway between the roof's ridge and wallplate, known as a purlin, to support the rafters since they are of a length that exceeds an ordinary roof. A double roof design allows for ventilation in the space between the roofs and can catch wind at high velocities. They are commonly used in tropical climates for their benefits of reducing heat gain. Double pitched roofs are a traditional roof type supported by load-bearing walls and the ridge, and can be classified as symmetrical or asymmetrical depending on whether the roof surfaces are equal or differ in length and area.
FINISHED POSTER
The document discusses a retrofit project for a building used by the Department of Building and Civil Engineering. It will involve refurbishing the interior and modifying the exterior facades, as well as adding a new link bridge. The focus is on improving ventilation using louvred windows that open automatically according to sensors and a building management system. CO2 monitors and actuators will help control window openings to ensure adequate air changes. Rain sensors will close windows during rainfall.
Effective use of twin wall flue
Twin wall flue, also known as pre-fabricated or double wall insulated flue, is made of two layers of stainless steel with insulation between. It is installed when there is no chimney, and the flue system must remain straight and high enough to ensure hot gases and smoke are cleared to the outside. Twin wall flue components can be routed internally or externally through roof flashings, and the correct size and dimensions of the chimney and flue pipe must be determined to install the flue system properly.
Visual dictionary Sp10Slope
1. The document defines and describes various construction materials and components used in building construction including air barriers, attic ventilation, backhoes, brick bonds, brick sizes, cladding materials, doors, electrical components, framing elements, insulation types, lintel, mortar joints, oriented strand board, plumbing fixtures, plywood, rebar, roofing materials and components, siding, stone types, vapor retarders, waterproofing, weep holes, welded wire fabric, and window types.
2. Details are provided on sizes, uses, installation methods and other specifications for many common construction items like bricks, concrete, doors, framing lumber, insulation, roofing, siding, plumbing and
Ohagin attic vents solutions
O'Hagin manufactures attic ventilation products in various materials like galvanized steel, copper, and aluminum. They produce vents designed to match specific tile profiles and roofing materials. Their product line includes standard attic vents for maximum airflow, WeatherMaster vents that prevent rain and snow from entering, and Fire & Ice vents with a stainless steel matrix that resists flames and embers. They also offer universal direct deck vents for maximum ventilation.
Visual dictionary/ sp10sash
1. The document provides images and descriptions of various materials, methods, and equipment used in construction including air barrier paper, attic ventilation materials, backhoes, batter boards, brick bonds, brick sizes, bulldozers, cladding materials, concrete joints, concrete masonry units, decorative concrete masonry units, doors, electrical components, framing elements, front end loaders, gypsum board, insulation materials, lintels, mortar, oriented strand board, plumbing components, plywood, radiant barriers, rebar, roof drainage systems, roof materials, roof shapes, stone types, vapor retarders, water proofing, weep holes, welded wire fabric, and window types.
Visual dictionary - Sp10slope
The document defines and describes various construction materials and components used in building construction including air barriers, attic ventilation, backhoes, batter boards, bricks and brick bonds, bulldozers, cladding materials, concrete joints, CMU, doors and door components, electrical components, framing elements, front end loaders, gypsum board, heat pumps, insulation materials, lintels, mortar joints, oriented strand board, plumbing components, plywood, radiant barriers, rebar, roof drainage components, roof materials, roof shapes and terms, stone types, vapor retarders, waterproofing, weep holes, welded wire fabric, and window types. It provides descriptions, sizes, and intended uses for
LiamBaines_Construction_FACADES
This document contains Liam Baines' individual facade design contribution to a joint office block project. The north elevation will feature a glass curtain wall to maximize natural light, while the west, south and east elevations will have aluminum composite panel facades. Drawings show floor plans, elevations and section details of the proposed aluminum composite panel and glass curtain wall facade systems.
Introduction to types of roofs
Roofers are those people who develop and repair rooftops. The roof should always be strong and reliable enough so that it can sustain for a long time and keep you safe for weather conditions. Let me introduce you with a short introduction on types of roofs.
Rod Visual Dictionary
Air barrier paper controls air leakage into and out of buildings while allowing water vapor to pass. Attic ventilation includes roof turbines, soffit vents, ridge vents, and gable vents. A backhoe is an excavator whose bucket is rigidly attached to a hinged pole and drawn backward. Batter boards are used in bricklaying. Common brick bonds include running bond, English bond, Flemish bond, and soldiers. Bulldozers are used to push large quantities of soil and rubble during construction work. Common cladding materials include brick, wood siding, EIFS, and wood shingles. Concrete masonry units are rectangular concrete blocks used in construction. Split and ribbed
Floor
This document provides an overview of flooring in buildings. It defines a floor as the bottom surface of a room or vehicle that provides a level surface to support occupants, furniture, and equipment. Floors are classified based on their shape, construction, and location within a building. Various types of flooring materials are described, including mud, brick, flagstone, concrete, terrazzo, tile, wood, asphalt, rubber, cork, and plastic floors. The document outlines the requirements for good floors and discusses factors to consider when selecting flooring materials for different applications.
Visual Dictionary - Scaffold
Air barrier paper is a synthetic material used to wrap house sheathing before siding installation to prevent water intrusion under the siding. Soffit, ridge, gable, and roof turbine vents allow airflow in and out of attics to regulate heat and humidity. A backhoe uses hydraulics to power an arm and bucket for excavation, while a bulldozer pushes objects on the ground using a broad metal head. Batter boards mark foundation lines during excavation.
Zig zag sockets
Zig-zag sockets are used to interconnect integrated circuits and memory chips arranged in a staggered double row pattern to a printed circuit board. They contain precision-machined receptacles with multi-finger contact clips housed in thermoplastic insulators. Machined pin sockets use a brass shell housing a reliable beryllium copper contact clip to securely connect device leads. Zig-zag and machined pin sockets provide protection, easy replacement, and cost-effective connections suitable for industrial, medical, aerospace, consumer, automotive, and military applications.
Electric fireplaces
When installing a chimney is not an option, electric fireplaces are an easy and safe solution for your heating needs.
Floor outlets
Floor outlets are electrical outlets installed in a floor rather than a wall. They typically have a metal plate and spring-loaded door covers for each plug to prevent dust accumulation. Floor outlets are commonly found in living rooms and conference rooms to provide easy access to electricity away from walls. Installation of floor outlets is similar to wall outlets, with wiring running from the outlet box to a central junction box, and they should only be installed by a certified electrician.
Double skin facade
Double skin façades. Almost a self-explanatory name for façade systems consisting of two layers, usually glass, wherein air flows through the intermediate cavity. This space (which can vary from 20 cm to a few meters) acts as insulation against extreme temperatures, winds, and sound, improving the building's thermal efficiency for both high and low temperatures.
Credit :
Danish Pathan
Imran Inamdar
Qais Patel
Simran Patel
Tehlil Tamboli
Afshan Saudagar
Ubed Ali Sayyed
Omkar Salkar
Taher Ajmerwala
Danish Sheikh
Jason Fong - Instrumentation Engineering Technologist update April 18
Jason Fong has over 3 years of experience as an electrical apprentice and designer. He has a diploma in Electronics Engineering Technology from the College of the North Atlantic and is FOA certified in fiber optic technician and outside plant specialist skills. His education also includes some courses towards an Electrical Engineering degree from Lakehead University. He is pursuing his electrical apprenticeship license and safety training while working at Ozz Electric and has experience in framing, serving, and electrical design work.
instrumentation Engineering Cv
I'm Abdullah have Experience in the field of Instrumentation so for this utilities of others i am uploading my cv format so that anyone could take help,,,,,,
Lecture 10
The document discusses organic field effect transistors (OFETs). It describes how the first OFET was reported in 1986 using polythiophene and how they operate using a semiconductor layer between a source, drain and gate. OFETs can be configured with top or bottom contacts. Their characteristics include transfer and output curves which depend on varying the gate-source or drain-source voltage. Pentacene is described as a commonly used organic semiconductor due to its high carrier mobility and ease of synthesis. OFETs provide advantages over inorganic transistors such as lower cost, flexibility and lighter weight but have disadvantages including higher resistance and shorter lifetimes.
Carrers in instrumentation engineering
Instrumentation engineering focuses on measuring instruments and automated systems. To enter bachelor's programs, students need a science-based high school diploma with physics, chemistry, and math. Graduates work in research and development, heavy industries, and manufacturing, earning an average salary of Rs 394,990 annually. Several universities in India offer instrumentation engineering programs, including the Institute of Instrumentation Engineering in Kurukshetra, Haryana.
Reverse engineering and instrumentation of android apps
The document discusses different approaches for instrumenting Android apps to add network monitoring capabilities. It describes choosing to modify the app's dex file by disassembling it to Smali code, inserting instrumentation code, and reassembling it. This allows intercepting HTTP calls without requiring access to the app's source code or build process. The key benefits are that it works on any app and Android version without the app's code needing changes.
Mechanical, Electrical and Instrumentation Engineering for Non-Engineers
You will learn the basic applied concepts of mechanical, electrical and instrumentation engineering in this workshop. This will enable you to work more effectively with your engineering colleagues – no matter whether they are operators, tradespersons, technicians or engineers. There are three main threads running through this course – initially mechanical engineering, then electrical engineering best practice and concluded with instrumentation (or industrial automation).
Mechanical engineering in simple terms deals with any equipment that moves; this is what makes it perhaps the most broad and diverse of engineering disciplines. The mechanical discipline essentially derives its breadth from the need to design and manufacture everything from small, even nano, individual devices, such as measuring instruments, to large systems such as machine tools and power plants.
The focus in electrical engineering is on the building blocks of electrical engineering, the fundamentals of electrical design and integrating electrical engineering know-how into the other disciplines within an organisation. Unnecessary theory will be minimised. The dangers and risks from electrocution, shock, explosions and arc blast can never be eliminated but you can take definite steps to protect yourself and your co-workers. The topics in instrumentation engineering commence with an introduction to instrumentation and measurement ranging from pressure, level, temperature and flow devices followed by a review of process control including the all important topic of PID loop tuning.
WHO SHOULD ATTEND?
Administration staff
Civil, mechanical, chemical, mining engineers, technologists and technicians
Electrical contractors
Finance, IT and accounting managers
Human resources managers
IT personnel
Legal personnel
Managers who are involved with or work with staff and projects in electrical engineering
Non-electrical and mechanical engineers and technicians
Non-electrical and mechanical personnel who want to understand the broader picture
Non-engineering personnel
Operators
Plant and facility engineers
Procurement and buying staff
Project managers
Sales engineers
Senior managers
MORE INFORMATION: http://www.idc-online.com/content/mechanical-electrical-and-instrumentation-engineering-non-engineers?id=8057
More Related Content
What's hot
Double roof structure
A double roof is a roof structure that requires an intermediate support beam halfway between the roof's ridge and wallplate, known as a purlin, to support the rafters since they are of a length that exceeds an ordinary roof. A double roof design allows for ventilation in the space between the roofs and can catch wind at high velocities. They are commonly used in tropical climates for their benefits of reducing heat gain. Double pitched roofs are a traditional roof type supported by load-bearing walls and the ridge, and can be classified as symmetrical or asymmetrical depending on whether the roof surfaces are equal or differ in length and area.
FINISHED POSTER
The document discusses a retrofit project for a building used by the Department of Building and Civil Engineering. It will involve refurbishing the interior and modifying the exterior facades, as well as adding a new link bridge. The focus is on improving ventilation using louvred windows that open automatically according to sensors and a building management system. CO2 monitors and actuators will help control window openings to ensure adequate air changes. Rain sensors will close windows during rainfall.
Effective use of twin wall flue
Twin wall flue, also known as pre-fabricated or double wall insulated flue, is made of two layers of stainless steel with insulation between. It is installed when there is no chimney, and the flue system must remain straight and high enough to ensure hot gases and smoke are cleared to the outside. Twin wall flue components can be routed internally or externally through roof flashings, and the correct size and dimensions of the chimney and flue pipe must be determined to install the flue system properly.
Visual dictionary Sp10Slope
1. The document defines and describes various construction materials and components used in building construction including air barriers, attic ventilation, backhoes, brick bonds, brick sizes, cladding materials, doors, electrical components, framing elements, insulation types, lintel, mortar joints, oriented strand board, plumbing fixtures, plywood, rebar, roofing materials and components, siding, stone types, vapor retarders, waterproofing, weep holes, welded wire fabric, and window types.
2. Details are provided on sizes, uses, installation methods and other specifications for many common construction items like bricks, concrete, doors, framing lumber, insulation, roofing, siding, plumbing and
Ohagin attic vents solutions
O'Hagin manufactures attic ventilation products in various materials like galvanized steel, copper, and aluminum. They produce vents designed to match specific tile profiles and roofing materials. Their product line includes standard attic vents for maximum airflow, WeatherMaster vents that prevent rain and snow from entering, and Fire & Ice vents with a stainless steel matrix that resists flames and embers. They also offer universal direct deck vents for maximum ventilation.
Visual dictionary/ sp10sash
1. The document provides images and descriptions of various materials, methods, and equipment used in construction including air barrier paper, attic ventilation materials, backhoes, batter boards, brick bonds, brick sizes, bulldozers, cladding materials, concrete joints, concrete masonry units, decorative concrete masonry units, doors, electrical components, framing elements, front end loaders, gypsum board, insulation materials, lintels, mortar, oriented strand board, plumbing components, plywood, radiant barriers, rebar, roof drainage systems, roof materials, roof shapes, stone types, vapor retarders, water proofing, weep holes, welded wire fabric, and window types.
Visual dictionary - Sp10slope
The document defines and describes various construction materials and components used in building construction including air barriers, attic ventilation, backhoes, batter boards, bricks and brick bonds, bulldozers, cladding materials, concrete joints, CMU, doors and door components, electrical components, framing elements, front end loaders, gypsum board, heat pumps, insulation materials, lintels, mortar joints, oriented strand board, plumbing components, plywood, radiant barriers, rebar, roof drainage components, roof materials, roof shapes and terms, stone types, vapor retarders, waterproofing, weep holes, welded wire fabric, and window types. It provides descriptions, sizes, and intended uses for
LiamBaines_Construction_FACADES
This document contains Liam Baines' individual facade design contribution to a joint office block project. The north elevation will feature a glass curtain wall to maximize natural light, while the west, south and east elevations will have aluminum composite panel facades. Drawings show floor plans, elevations and section details of the proposed aluminum composite panel and glass curtain wall facade systems.
Introduction to types of roofs
Roofers are those people who develop and repair rooftops. The roof should always be strong and reliable enough so that it can sustain for a long time and keep you safe for weather conditions. Let me introduce you with a short introduction on types of roofs.
Rod Visual Dictionary
Air barrier paper controls air leakage into and out of buildings while allowing water vapor to pass. Attic ventilation includes roof turbines, soffit vents, ridge vents, and gable vents. A backhoe is an excavator whose bucket is rigidly attached to a hinged pole and drawn backward. Batter boards are used in bricklaying. Common brick bonds include running bond, English bond, Flemish bond, and soldiers. Bulldozers are used to push large quantities of soil and rubble during construction work. Common cladding materials include brick, wood siding, EIFS, and wood shingles. Concrete masonry units are rectangular concrete blocks used in construction. Split and ribbed
Floor
This document provides an overview of flooring in buildings. It defines a floor as the bottom surface of a room or vehicle that provides a level surface to support occupants, furniture, and equipment. Floors are classified based on their shape, construction, and location within a building. Various types of flooring materials are described, including mud, brick, flagstone, concrete, terrazzo, tile, wood, asphalt, rubber, cork, and plastic floors. The document outlines the requirements for good floors and discusses factors to consider when selecting flooring materials for different applications.
Visual Dictionary - Scaffold
Air barrier paper is a synthetic material used to wrap house sheathing before siding installation to prevent water intrusion under the siding. Soffit, ridge, gable, and roof turbine vents allow airflow in and out of attics to regulate heat and humidity. A backhoe uses hydraulics to power an arm and bucket for excavation, while a bulldozer pushes objects on the ground using a broad metal head. Batter boards mark foundation lines during excavation.
Zig zag sockets
Zig-zag sockets are used to interconnect integrated circuits and memory chips arranged in a staggered double row pattern to a printed circuit board. They contain precision-machined receptacles with multi-finger contact clips housed in thermoplastic insulators. Machined pin sockets use a brass shell housing a reliable beryllium copper contact clip to securely connect device leads. Zig-zag and machined pin sockets provide protection, easy replacement, and cost-effective connections suitable for industrial, medical, aerospace, consumer, automotive, and military applications.
Electric fireplaces
When installing a chimney is not an option, electric fireplaces are an easy and safe solution for your heating needs.
Floor outlets
Floor outlets are electrical outlets installed in a floor rather than a wall. They typically have a metal plate and spring-loaded door covers for each plug to prevent dust accumulation. Floor outlets are commonly found in living rooms and conference rooms to provide easy access to electricity away from walls. Installation of floor outlets is similar to wall outlets, with wiring running from the outlet box to a central junction box, and they should only be installed by a certified electrician.
Double skin facade
Double skin façades. Almost a self-explanatory name for façade systems consisting of two layers, usually glass, wherein air flows through the intermediate cavity. This space (which can vary from 20 cm to a few meters) acts as insulation against extreme temperatures, winds, and sound, improving the building's thermal efficiency for both high and low temperatures.
Credit :
Danish Pathan
Imran Inamdar
Qais Patel
Simran Patel
Tehlil Tamboli
Afshan Saudagar
Ubed Ali Sayyed
Omkar Salkar
Taher Ajmerwala
Danish Sheikh
What's hot (16)
Viewers also liked
Jason Fong - Instrumentation Engineering Technologist update April 18
Jason Fong has over 3 years of experience as an electrical apprentice and designer. He has a diploma in Electronics Engineering Technology from the College of the North Atlantic and is FOA certified in fiber optic technician and outside plant specialist skills. His education also includes some courses towards an Electrical Engineering degree from Lakehead University. He is pursuing his electrical apprenticeship license and safety training while working at Ozz Electric and has experience in framing, serving, and electrical design work.
instrumentation Engineering Cv
I'm Abdullah have Experience in the field of Instrumentation so for this utilities of others i am uploading my cv format so that anyone could take help,,,,,,
Lecture 10
The document discusses organic field effect transistors (OFETs). It describes how the first OFET was reported in 1986 using polythiophene and how they operate using a semiconductor layer between a source, drain and gate. OFETs can be configured with top or bottom contacts. Their characteristics include transfer and output curves which depend on varying the gate-source or drain-source voltage. Pentacene is described as a commonly used organic semiconductor due to its high carrier mobility and ease of synthesis. OFETs provide advantages over inorganic transistors such as lower cost, flexibility and lighter weight but have disadvantages including higher resistance and shorter lifetimes.
Carrers in instrumentation engineering
Instrumentation engineering focuses on measuring instruments and automated systems. To enter bachelor's programs, students need a science-based high school diploma with physics, chemistry, and math. Graduates work in research and development, heavy industries, and manufacturing, earning an average salary of Rs 394,990 annually. Several universities in India offer instrumentation engineering programs, including the Institute of Instrumentation Engineering in Kurukshetra, Haryana.
Reverse engineering and instrumentation of android apps
The document discusses different approaches for instrumenting Android apps to add network monitoring capabilities. It describes choosing to modify the app's dex file by disassembling it to Smali code, inserting instrumentation code, and reassembling it. This allows intercepting HTTP calls without requiring access to the app's source code or build process. The key benefits are that it works on any app and Android version without the app's code needing changes.
Mechanical, Electrical and Instrumentation Engineering for Non-Engineers
You will learn the basic applied concepts of mechanical, electrical and instrumentation engineering in this workshop. This will enable you to work more effectively with your engineering colleagues – no matter whether they are operators, tradespersons, technicians or engineers. There are three main threads running through this course – initially mechanical engineering, then electrical engineering best practice and concluded with instrumentation (or industrial automation).
Mechanical engineering in simple terms deals with any equipment that moves; this is what makes it perhaps the most broad and diverse of engineering disciplines. The mechanical discipline essentially derives its breadth from the need to design and manufacture everything from small, even nano, individual devices, such as measuring instruments, to large systems such as machine tools and power plants.
The focus in electrical engineering is on the building blocks of electrical engineering, the fundamentals of electrical design and integrating electrical engineering know-how into the other disciplines within an organisation. Unnecessary theory will be minimised. The dangers and risks from electrocution, shock, explosions and arc blast can never be eliminated but you can take definite steps to protect yourself and your co-workers. The topics in instrumentation engineering commence with an introduction to instrumentation and measurement ranging from pressure, level, temperature and flow devices followed by a review of process control including the all important topic of PID loop tuning.
WHO SHOULD ATTEND?
Administration staff
Civil, mechanical, chemical, mining engineers, technologists and technicians
Electrical contractors
Finance, IT and accounting managers
Human resources managers
IT personnel
Legal personnel
Managers who are involved with or work with staff and projects in electrical engineering
Non-electrical and mechanical engineers and technicians
Non-electrical and mechanical personnel who want to understand the broader picture
Non-engineering personnel
Operators
Plant and facility engineers
Procurement and buying staff
Project managers
Sales engineers
Senior managers
MORE INFORMATION: http://www.idc-online.com/content/mechanical-electrical-and-instrumentation-engineering-non-engineers?id=8057
Emerging Trends in Electrical, Electronics & Instrumentation Engineering: An ...
Emerging Trends in Electrical, Electronics & Instrumentation Engineering: An international Journal aims to bring together researchers and practitioners from academia and industry to focus on recent systems and techniques in the broad field of electrical, instrumentation and communication Engineering. Original research papers, state-of-the-art reviews are invited for publication in all areas of Electrical Electronics & Instrumentation Engineering.
Authors are solicited to contribute to this journal by submitting articles that illustrate research results, projects, surveying works and industrial experiences that describe significant advances in the following areas, but are not limited to
Big picture of electronics and instrumentation engineering
(1) The document discusses the various topics related to electronics and instrumentation engineering including aptitude, attitude, attributes of engineers, graduate attributes, technical and soft skills, bridging industry-academic gap, learning environment, levels of learning, and expected profile of IT employees.
(2) It also outlines the core subjects of electronics and instrumentation engineering such as instrumentation, control, electrical, electronics, computer, mechanical, management, and societal subjects.
(3) Important subjects discussed include physics, chemistry, mathematics, programming, civil and mechanical engineering, circuit theory, and specialization subjects in different domains of electronics and instrumentation.
Instrumentation Engineering : Transducers, THE GATE ACADEMY
THE GATE ACADEMY's GATE Correspondence Materials consist of complete GATE syllabus in the form of booklets with theory, solved examples, model tests, formulae and questions in various levels of difficulty in all the topics of the syllabus. The material is designed in such a way that it has proven to be an ideal material in-terms of an accurate and efficient preparation for GATE.
Quick Refresher Guide : is especially developed for the students, for their quick revision of concepts preparing for GATE examination. Also get 1 All India Mock Tests with results including Rank,Percentile,detailed performance analysis and with video solutions
GATE QUESTION BANK : is a topic-wise and subject wise collection of previous year GATE questions ( 2001 – 2013). Also get 1 All India Mock Tests with results including Rank,Percentile,detailed performance analysis and with video solutions
Bangalore Head Office:
THE GATE ACADEMY
# 74, Keshava Krupa(Third floor), 30th Cross,
10th Main, Jayanagar 4th block, Bangalore- 560011
E-Mail: info@thegateacademy.com
Ph: 080-61766222
Electrical and Instrumentation (E&I) Engineering for Oil and Gas Facilities
This document discusses electrical power systems for oil and gas facilities. It explains that power plants are often located in remote areas near fuel sources, and power must be transmitted over long distances to population centers via high-voltage power lines. Almost all commercial power generation and transmission uses alternating current (AC) because AC can easily change voltages and is more economical for power system operations. The document then describes key aspects of AC power including waveforms, single and three-phase systems, and formulas for calculating apparent power, active power, and reactive power.
Instrumentation Engineering
Instrumentation engineering deals with measurement, control, and automation of industrial processes. It involves using instruments to monitor and regulate variables like temperature, pressure, and flow. Instrumentation engineers work in many industries including steel, oil, petrochemical, power, aviation, aerospace, and defense. They design and implement instrumentation systems for applications like manufacturing plants, aircraft, medical equipment, home appliances, and more. Graduates have strong career prospects in both private companies and government sectors across various fields.
PRESSURE INSTRUMENTATION
The document discusses various types of pressure measurement instruments and concepts. It describes pressure gauges, transmitters, and transducers, explaining their measuring principles, components, installation considerations, and common terms. Diagrams illustrate typical configurations and components of differential pressure transmitters and loops.
Basics Of Instrumentation
This document provides an overview of instrumentation and process control. It defines key terms like instrumentation, process, transducer, signal, loop, controller, and interlock. It describes common process parameters measured like pressure, level, temperature, and flow. It discusses primary measuring devices and principles for each process variable. It also covers control valves and automation systems like DCS, PLC, and SCADA.
Introduction To Software Engineering
The importance of software since there is were the motivation for software engineering lies and then and introduction to software engineering mentioning the concept and stages of development and working in teams
Viewers also liked (14)
Jason Fong - Instrumentation Engineering Technologist update April 18
Jason Fong - Instrumentation Engineering Technologist update April 18
Reverse engineering and instrumentation of android apps
Reverse engineering and instrumentation of android apps
Mechanical, Electrical and Instrumentation Engineering for Non-Engineers
Mechanical, Electrical and Instrumentation Engineering for Non-Engineers
Emerging Trends in Electrical, Electronics & Instrumentation Engineering: An ...
Emerging Trends in Electrical, Electronics & Instrumentation Engineering: An ...
Big picture of electronics and instrumentation engineering
Big picture of electronics and instrumentation engineering
Instrumentation Engineering : Transducers, THE GATE ACADEMY
Instrumentation Engineering : Transducers, THE GATE ACADEMY
Electrical and Instrumentation (E&I) Engineering for Oil and Gas Facilities
Electrical and Instrumentation (E&I) Engineering for Oil and Gas Facilities
Similar to Presentation on e&i supports
False ceiling
False ceiling is an important element of design in interior layout of architecture .
building construction material
Ateco general power point presentation
Ateco desing and manufacture storage tank equipment including aluminum dome roof - internal floating roofs - primary and secondary seals
Ateco General Power Point Presentation
Ateco manufacture storage tank equipment - Aluminum Dome Roof, Internal Floating Roofs and Rim Gap Seals.
Acopladores para armaduras
O uso de acopladores Ancon simplificara concepção e construção em betão armado e reduz a quantidade de reforço necessário. Os Acopladores Ancon para União de varões de aço nervurado existem em três conceitos: Aperto Lateral - Rosca Cónica - Rosca Direita Apresenta ainda suloções de posicionamento e transição de diâmetros.
Provisions for non -structural fastenings
This document discusses two methods for incorporating mechanical, electrical, and plumbing (MEP) systems into prefabricated construction: 1) Embedding services directly into precast panels during fabrication, and 2) Using an external tray system mounted on finished surfaces. It provides details on planning and executing MEP installations for each method.
Pre Bid Conference
The document discusses specifications for installing an automated storage and retrieval system (ASRS) at a railway carriage repair depot. It provides details on the existing site layout, proposed ASRS layout, specifications for the ASRS equipment including cranes and storage racks, and integrating the ASRS with the depot's inventory and warehouse management systems. Integration with other railway systems is also discussed to track material movement.
EJOT Solar Brochure
This document discusses EJOT's fastening solutions for solar installations on various building types. It describes their Solar Fastening System for attaching solar panels to pitched roofs made of materials like steel, wood, and asphalt shingles. For industrial flat roofs, it recommends using their flat roof support and Solar Fastener FD together to absorb wind and shear forces. It also introduces their EJObar system for attaching equipment to single-ply membranes and their Solar i-Clip for universal attachment to residential roofs of various materials.
Scs – A World Of Possibilities R New
SCS is a pre-engineered formwork system using modular wall panels for fast construction of buildings. The system uses galvanized steel studs, fiber cement boards, insulation, and poured concrete. Wall panels are custom made and can be assembled on site quickly. Electrical, plumbing, and other systems can be integrated before pouring concrete. Current projects showcase the system's use for villas, apartments, and commercial buildings.
Nec wall mount user manual
NEC Wall Mounts are avaiable from Dukane.
Bill McIntosh
Phone : 843-442-8888
Email : WKMcIntosh@Comcast.net
LUSIN DESIGN_30.07.2016
This document provides lighting design plans for the interior and exterior of a private residence. It includes floor plans showing the layout of the ground and first floors with lighting fixture locations. Technical documentation includes power and data layouts, as well as home automation details like lighting control, security, and HVAC integration. Interior lighting designs are provided for rooms like the kitchen, dining room, bedrooms, and bathrooms. Exterior lighting designs illuminate architectural features and landscaping.
02 verso compact_en_0703
CCTV housing camera is the best for the outdoor security. It's a weather proof device which is fully specified by our side.
Wiring estimation costing and contracting suitable for diploma electrical eng...
There are two types of conduit wiring: surface conduit wiring, where conduits are installed on the surface of walls, and concealed conduit wiring, where conduits are hidden inside walls. Conduits can be made of metallic materials like steel or non-metallic materials like PVC. Conduit wiring provides protection from mechanical and fire damage and is safer than other wiring methods. While more expensive and time-consuming to install, conduit wiring has advantages such as easier repair and maintenance.
UBS Client price list PDF
Universal Building Solutions provides a price list for their building materials including expanded polystyrene (EPS) insulation panels, wall blocks, construction panels, columns and beams. The price per square meter depends on the EPS density and specifications required. Wall blocks are 2m long, 1m high, and 186mm thick starting at $22.60 per meter for 15kg density blocks. Construction panels are 4m long, 600mm wide, 120mm thick, and internally reinforced with steel tubes starting at $24.60 per meter. Columns and beams can be manufactured to specification with a standard wall thickness of 40mm.
Building-Integrated PhotovoltaicDesigns.pptx
This document provides details about the 4 Times Square building in New York City that incorporates building-integrated photovoltaics (BIPV). Some key points:
1) BIPV panels replace conventional spandrel glass on floors 37-43, generating 14 kWp of solar electricity.
2) The custom BIPV panels are mounted the same way as standard glass curtain wall panels.
3) Three inverters convert the DC electricity from the panels to AC electricity that is fed into the building's electrical system.
How to install false ceiling
This document discusses different types of false ceilings, including their purposes, advantages, materials, and installation methods. It describes common suspended ceiling systems like exposed and concealed grid ceilings. Key materials mentioned include gypsum boards, metal panels, fiberboard, and mineral tiles. Installation photos show the process for concealed grid and exposed strip ceilings.
long span roof
This document discusses different types of long span roof structures including portal frame roofs. It describes the anatomy of a typical portal frame roof, which comprises columns, rafters, secondary steelwork like purlins and side rails, and cladding. Different types of portal frames are also discussed. The document further explains installation methods for metal decking on long span roofs and considers natural lighting and ventilation for industrial buildings.
Nystrom CE Course-INY07A Managing Building Movement with Joints_In-Person_Sli...
Nystrom CE Course-INY07A Managing Building Movement with Joints_In-Person_Sli...Nystrom Building Products
Provides an overview of how buildings move and information about building joints, forces, types, filler and covers.Transpower Switchgear Industries, Mumbai, Electrical Products
A Leading manufacturer, exporter and supplier of a wide range of electrical products and electrical components such as electrical fuse, electrical fittings, insulated rubber matting, distribution transformer and safety equipment Distribution Transformer, Distribution Transformers, Voltage Stabilizer, Electrical Isolators Switch Isolators Single Break Isolator Tilting Type, Gang Operator Switch
final dcc
This document provides details of the plans for retrofitting an existing apartment building in Dublin to meet Passivhaus energy standards. It includes floor plans and sections showing the proposed design with increased insulation, airtightness and mechanical ventilation. Technical specifications are given for the insulation levels and materials used in the walls, roof, floors and balconies to achieve ultra-low heat loss. The retrofit aims to significantly improve the building's energy efficiency from its current low rating.
Philips eColor Cove EC Powercore Product Guide
The eColor Cove EC Powercore is a linear LED cove lighting fixture that provides dimmable solid color lighting using Powercore technology. Powercore delivers line voltage directly to the fixtures, simplifying installation by eliminating external power supplies. The fixtures have end-to-end locking connectors that allow turns of up to 180 degrees and come in 6-inch and 12-inch lengths that can be daisy chained together or used with optional jumper cables. The eColor Cove EC Powercore is suitable for interior retail, exhibit, hospitality, and architectural applications.
Similar to Presentation on e&i supports (20)
Wiring estimation costing and contracting suitable for diploma electrical eng...
Wiring estimation costing and contracting suitable for diploma electrical eng...
Nystrom CE Course-INY07A Managing Building Movement with Joints_In-Person_Sli...
Nystrom CE Course-INY07A Managing Building Movement with Joints_In-Person_Sli...
Transpower Switchgear Industries, Mumbai, Electrical Products
Transpower Switchgear Industries, Mumbai, Electrical Products
Recently uploaded
Ellen Burstyn: From Detroit Dreamer to Hollywood Legend | CIO Women Magazine
In this article, we will dive into the extraordinary life of Ellen Burstyn, where the curtains rise on a story that's far more attractive than any script.
一比一原版(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证文凭如何办理
永久可查学历认证【微信：A575476】【(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
DearbornMusic-KatherineJasperFullSailUni
My powerpoint presentation for my Music Retail and Distribution class at Full Sail University
Cover Story - China's Investment Leader - Dr. Alyce SU
In World Expo 2010 Shanghai – the most visited Expo in the World History
https://www.britannica.com/event/Expo-Shanghai-2010
China’s official organizer of the Expo, CCPIT (China Council for the Promotion of International Trade https://en.ccpit.org/) has chosen Dr. Alyce Su as the Cover Person with Cover Story, in the Expo’s official magazine distributed throughout the Expo, showcasing China’s New Generation of Leaders to the World.
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
In a world where the potential of youth innovation remains vastly untouched, there emerges a guiding light in the form of Norm Goldstein, the Founder and CEO of EduNetwork Partners. His dedication to this cause has earned him recognition as a Congressional Leadership Award recipient.
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
Discover the Beauty and Functionality of The Expert Remodeling Service
Unlock your kitchen's true potential with expert remodeling services from O'Brien Group Inc. Transform your space into a functional, modern, and luxurious haven with their experienced professionals. From layout reconfiguration to high-end upgrades, they deliver stunning results tailored to your style and needs. Visit obriengroupinc.com to elevate your kitchen's beauty and functionality today.
Industrial Tech SW: Category Renewal and Creation
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
TIMES BPO: Business Plan For Startup Industry
Starting a business is like embarking on an unpredictable adventure. It’s a journey filled with highs and lows, victories and defeats. But what if I told you that those setbacks and failures could be the very stepping stones that lead you to fortune? Let’s explore how resilience, adaptability, and strategic thinking can transform adversity into opportunity.
PM Surya Ghar Muft Bijli Yojana: Online Application, Eligibility, Subsidies &...
PM Surya Ghar Muft Bijli Yojana: Online Application, Eligibility, Subsidies &...Ksquare Energy Pvt. Ltd.
During the budget session of 2024-25, the finance minister, Nirmala Sitharaman, introduced the “solar Rooftop scheme,” also known as “PM Surya Ghar Muft Bijli Yojana.” It is a subsidy offered to those who wish to put up solar panels in their homes using domestic power systems. Additionally, adopting photovoltaic technology at home allows you to lower your monthly electricity expenses. Today in this blog we will talk all about what is the PM Surya Ghar Muft Bijli Yojana. How does it work? Who is eligible for this yojana and all the other things related to this scheme?Kirill Klip GEM Royalty TNR Gold Copper Presentation
Tesla Energy rEVolution And The Golden Age For Copper: Kirill Klip GEM Royalty TNR Gold Copper Presentation
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Stone Art Hub offers the best competitive Marble Pricing in Dubai, ensuring affordability without compromising quality. With a wide range of exquisite marble options to choose from, you can enhance your spaces with elegance and sophistication. For inquiries or orders, contact us at ☎ 9928909666. Experience luxury at unbeatable prices.
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
IMG_20240615_091110.pdf dpboss guessing
Satta matka fixx jodi panna all market dpboss matka guessing fixx panna jodi kalyan and all market game liss cover now 420 matka office mumbai maharashtra india fixx jodi panna
Call me 9040963354
WhatsApp 9040963354
Digital Transformation Frameworks: Driving Digital Excellence
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
Business storytelling: key ingredients to a story
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
The latest Heat Pump Manual from Newentide
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
Recently uploaded (20)
Ellen Burstyn: From Detroit Dreamer to Hollywood Legend | CIO Women Magazine
Ellen Burstyn: From Detroit Dreamer to Hollywood Legend | CIO Women Magazine
Cover Story - China's Investment Leader - Dr. Alyce SU
Cover Story - China's Investment Leader - Dr. Alyce SU
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Discover the Beauty and Functionality of The Expert Remodeling Service
Discover the Beauty and Functionality of The Expert Remodeling Service
PM Surya Ghar Muft Bijli Yojana: Online Application, Eligibility, Subsidies &...
PM Surya Ghar Muft Bijli Yojana: Online Application, Eligibility, Subsidies &...
Kirill Klip GEM Royalty TNR Gold Copper Presentation
Kirill Klip GEM Royalty TNR Gold Copper Presentation
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Digital Transformation Frameworks: Driving Digital Excellence
Digital Transformation Frameworks: Driving Digital Excellence
Presentation on e&i supports
- 1. EQUIPMENT SUPPORT INSTALLATION ELECTRICAL & INSTRUMENTATION Date: 29th Feb 2012
- 2. EXTERNAL SERVICE BAY SUPPORT Rework carried out to install the electrical equipment supports at external service bay after completion of final painting.
- 3. EXTERNAL SUPPORT ON WALL Electrical supports at accommodation unit service bay area with long piece of angles. These type of long angle supports shall be avoided due to non-accessibility of welded area for painting/blasting and chances of water accumulation.
- 6. EXTERNAL SERVICE BAY SUPPORT Rework carried out to install the cable tray supports & earth boss at external service bay after completion of painting.
- 7. EXTERNAL CABLE TRAY SUPPORTS
- 9. TYPICAL SUPPORT INSTALLATION Additional supports requirement after painting of unit can be done by using pop-nut & unistrut to avoid paint/ insulation damage due to welding.
- 10. PIPE PENETRATION Rework carried out to install the pipe penetration for fire suppression system after completion of painting.
- 11. INTERNAL CEILING SUPPORT Welding of electrical supports for ceiling light after completion of internal insulation.
- 12. INTERNAL CEILING SUPPORT Welding of electrical supports after completion of internal insulation.
- 13. INTERNAL CEILING SUPPORT Welding of electrical supports after completion of internal insulation and support arrangement for ceiling light installation.
- 14. INTERNAL CEILING SUPPORT FOR LIGHT Welding of electrical supports after completion of internal insulation and support arrangement for ceiling light installation.
- 15. INTERNAL CEILING SUPPORT FOR LIGHT Welding of electrical supports after completion of internal insulation and support arrangement for ceiling light installation.
- 16. INTERNAL CEILING SUPPORT FOR LIGHT Welding of electrical supports after completion of internal insulation and support arrangement for ceiling light installation.
- 17. INTERNAL CEILING SUPPORT FOR LIGHT Welding of electrical supports after completion of internal insulation and support arrangement for ceiling light installation.
- 18. CEILING SUPPORTS
- 19. CEILING SUPPORTS
- 20. SUPPORTS ON WALL PANEL
- 22. EQUIPMENT INSTALLED ON INTERNAL WALL
- 23. INTERNAL SUPPORT ON CEILING Welding of electrical supports after completion of internal insulation and support arrangement for ceiling light installation.
- 24. INTERNAL SUPPORT ON WALL Insulation removed for welding of electrical supports after completion of internal insulation.
- 25. INTERNAL SUPPORT ON WALL Insulation removed for cable tray supports welding after completion of internal insulation.
- 26. INTERNAL CABLE TRAY SUPPORT ON WALL
- 27. INTERNAL CABLE TRAY Cable tray installed on insulated wall.
- 28. CPFG PANEL SUPPORT- WALL RECESS TYPE
- 29. CPFG PANEL SUPPORT- WALL SURFACE TYPE
- 30. DISTRIBUTION PANEL SUPPORT- WALL RECESS TYPE
- 31. DISTRIBUTION PANEL SUPPORT- WALL SURFACE TYPE
- 32. LIGHT SUPPORT ON PROCESS SKID
- 33. LIGHT SUPPORT ON PROCESS SKID
- 34. EQUIPMENT SUPPORT ON PROCESS SKID
- 35. CONDUIT SUPPORTS ON PROCESS SKID
- 36. SUMMARY 1. MAKE SURE THAT ALL WELDED TYPE SUPPORT / PENETRATION REQUIREMENT SHALL BE INDICATED ON THE STRUCTURAL DARWING AND ALSO UPDATE ON THE AS-BUILT DRAWINGS AS PER FINAL SITE INSTALLATION. 2. IF ANY ANGLE SUPPORTS WELDED FOR EXTERNAL AREAS SHALL BE ALWAYS IN VERTICAL ORIENTATION INSTEAD OF HORIZONTAL TO AVOID WATER ACCUMULATION AT WELDED AREAS.
- 37. Thanks! 37