This document provides details about the 4 Times Square building in New York City that incorporates building-integrated photovoltaics (BIPV). Some key points:
1) BIPV panels replace conventional spandrel glass on floors 37-43, generating 14 kWp of solar electricity.
2) The custom BIPV panels are mounted the same way as standard glass curtain wall panels.
3) Three inverters convert the DC electricity from the panels to AC electricity that is fed into the building's electrical system.
The Larkspur Remodel: A Phased Approach to the Passive House StandardBronwyn Barry
An example of a recent (2009) renovation designed to meet the Passive House energy standard, using a phased approach. (And yes, the air-tightness standard is possible on a retrofit!)
Aesthetic Green Power: History of building renewable energy 1994-2017Yulia Ovchinnikova
Solar energy can be built aesthetically integrated with engineering solution. We help to build energy Sustainable houses. Building Integrated Photo Voltaic is our signature approach and product.
Aesthetic Green Power is devoted to the proposition that buildings can be designed to supply much of their own energy through renewable sources. The concept that defines our product is building integrated photo voltaic (BIPV). We design our products as a durable weathering skin that protects the building as well as supplies it with solar electricity and optionally thermal energy.
The thermal option is defined as BITERS of building integrated thermal energy roofing systems. Our products are known to give a high priority to the look or aesthetic of the building as well whether a National Football Stadium, private residence or public space canopy.
The Larkspur Remodel: A Phased Approach to the Passive House StandardBronwyn Barry
An example of a recent (2009) renovation designed to meet the Passive House energy standard, using a phased approach. (And yes, the air-tightness standard is possible on a retrofit!)
Aesthetic Green Power: History of building renewable energy 1994-2017Yulia Ovchinnikova
Solar energy can be built aesthetically integrated with engineering solution. We help to build energy Sustainable houses. Building Integrated Photo Voltaic is our signature approach and product.
Aesthetic Green Power is devoted to the proposition that buildings can be designed to supply much of their own energy through renewable sources. The concept that defines our product is building integrated photo voltaic (BIPV). We design our products as a durable weathering skin that protects the building as well as supplies it with solar electricity and optionally thermal energy.
The thermal option is defined as BITERS of building integrated thermal energy roofing systems. Our products are known to give a high priority to the look or aesthetic of the building as well whether a National Football Stadium, private residence or public space canopy.
Reframed Tech Series: Prefabricated panels & deep retrofitsPembina Institute
The Pembina Institute presents the Reframed Tech Series — webinars on evolving deep retrofit solutions.
Making our homes future-ready calls for rapid scale-up, and industrializing the deep retrofit process is key. Modular housing and prefabricated panels for new construction have surged onto the scene in recent years. An emerging market for prefabrication is existing building retrofits. Watch this webinar to hear from leaders in prefabricated panel solutions.
Reframed Tech Series webinars: https://pembina.org/ReframedTechSeries
Learn more about our work: https://pembina.org/reframed
Roberto Lollini
Coordinatore gruppo “Energy Management in Buildings”, EURAC Istituto per le Energie Rinnovabili.
La sua attività è attualmente focalizzata sull’analisi del complesso edificio-impianto al fine di valutare il bilancio energetico e il comfort determinato da diverse soluzioni progettuali, sia su edifici nuovi che esistenti. Si occupa di pianificazione e gestione di progetti di ricerca nel settore della fisica delle costruzioni, in particolare per soluzioni passive.
WHY CHOOSE US
Many companies offer you either prototyping and design or manufacturing a product based on those prototypes. MEEE is different;
we do both.
Our mechanical engineering design consultants develop highly functional prototypes and help you achieve the apex position in the industry!
Just bring us an idea, and we can support you all the way from a basic concept to a fully fleshed-out product.
Aptly incorporating the brilliant concepts of electrical and electronics into existing mechanical systems in order to engender smart machines. Employing sophisticated designs and construction to create completely automated systems through electromechanical engineering. Providing ingenious solutions to problems which involve integrating software, robotics, control systems, and hardware.
Sustainable Research Assignment
Green Building Renovation
Rahsaan L. Browne Spring 2021
With the effects of climate change becoming even more profound New York plans to be carbon neutral by 2050. Residential and commercial buildings are some of the biggest polluters. Even with the initial cost for energy efficiency being approximately 1-12 % higher, varying by the building type going “Green” can be more cost-effective for the owner.
Our project was to locate an existing building that our developer/re-development team would benefit from upgrading or renovating. I live in the town of Valley Stream a suburb in Nassau County in Long Island and very little of the town is undeveloped. On our commercial and industrial strip, I was able to find a site that I believed would benefit from “Green” building renovation/retrofitting.
Filios Eleftherios, GREENSTRUCT, speaks about BIPV double façade modules and
thermochromic glass at the 'Innovative Technologies for EU Buildings Energy Retrofit and Deep Renovation' workshop hosted by RINNO and ENVISION.
TGOOD Middle East General Trading LLC company was established in 2015 in Dubai – UAE as a regional Head office for MENA (Middle East and North Africa) region for the sales & marketing of in-house manufactured products and engineering solutions capability of our parent company Qingdao TGOOD Electric Company Limited, head quartered (HQin Hong Kong.solar
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Reframed Tech Series: Prefabricated panels & deep retrofitsPembina Institute
The Pembina Institute presents the Reframed Tech Series — webinars on evolving deep retrofit solutions.
Making our homes future-ready calls for rapid scale-up, and industrializing the deep retrofit process is key. Modular housing and prefabricated panels for new construction have surged onto the scene in recent years. An emerging market for prefabrication is existing building retrofits. Watch this webinar to hear from leaders in prefabricated panel solutions.
Reframed Tech Series webinars: https://pembina.org/ReframedTechSeries
Learn more about our work: https://pembina.org/reframed
Roberto Lollini
Coordinatore gruppo “Energy Management in Buildings”, EURAC Istituto per le Energie Rinnovabili.
La sua attività è attualmente focalizzata sull’analisi del complesso edificio-impianto al fine di valutare il bilancio energetico e il comfort determinato da diverse soluzioni progettuali, sia su edifici nuovi che esistenti. Si occupa di pianificazione e gestione di progetti di ricerca nel settore della fisica delle costruzioni, in particolare per soluzioni passive.
WHY CHOOSE US
Many companies offer you either prototyping and design or manufacturing a product based on those prototypes. MEEE is different;
we do both.
Our mechanical engineering design consultants develop highly functional prototypes and help you achieve the apex position in the industry!
Just bring us an idea, and we can support you all the way from a basic concept to a fully fleshed-out product.
Aptly incorporating the brilliant concepts of electrical and electronics into existing mechanical systems in order to engender smart machines. Employing sophisticated designs and construction to create completely automated systems through electromechanical engineering. Providing ingenious solutions to problems which involve integrating software, robotics, control systems, and hardware.
Sustainable Research Assignment
Green Building Renovation
Rahsaan L. Browne Spring 2021
With the effects of climate change becoming even more profound New York plans to be carbon neutral by 2050. Residential and commercial buildings are some of the biggest polluters. Even with the initial cost for energy efficiency being approximately 1-12 % higher, varying by the building type going “Green” can be more cost-effective for the owner.
Our project was to locate an existing building that our developer/re-development team would benefit from upgrading or renovating. I live in the town of Valley Stream a suburb in Nassau County in Long Island and very little of the town is undeveloped. On our commercial and industrial strip, I was able to find a site that I believed would benefit from “Green” building renovation/retrofitting.
Filios Eleftherios, GREENSTRUCT, speaks about BIPV double façade modules and
thermochromic glass at the 'Innovative Technologies for EU Buildings Energy Retrofit and Deep Renovation' workshop hosted by RINNO and ENVISION.
TGOOD Middle East General Trading LLC company was established in 2015 in Dubai – UAE as a regional Head office for MENA (Middle East and North Africa) region for the sales & marketing of in-house manufactured products and engineering solutions capability of our parent company Qingdao TGOOD Electric Company Limited, head quartered (HQin Hong Kong.solar
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
GridMate - End to end testing is a critical piece to ensure quality and avoid...ThomasParaiso2
End to end testing is a critical piece to ensure quality and avoid regressions. In this session, we share our journey building an E2E testing pipeline for GridMate components (LWC and Aura) using Cypress, JSForce, FakerJS…
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
2. 4Times Square
Location: Broadway and 42nd Street, New York City, New York
Owner: Durst Corporation
Date Completed: September 1999
Architect & Designer: Fox & Fowle Architects, building architects;
Kiss + Cathcart Architects, PV system designers
PV Structural Engineers: FTL/Happold
Electrical Engineers: Engineers NY
Tradesmen Required: PV glazing done by shop labor at curtain wall
fabricator
Applicable Building Codes: New York City Building Code
Applicable Electric Codes: New York City Electrical Code and National
Electric Code
PV Product: Custom-sized BIPV glass laminate
Size: 14 kWp
Projected System Electrical Output: 13,800 kWh/yr
Gross PV Surface Area: 3,095 ft2
PV Weight: 13.5 lb/ft2
PV Cell Type: Amorphous silicon
PV Module Efficiency: 6%
PV Module Manufacturer: Energy Photovotaics, Inc.
Inverter Number and Size: Three inverters; two 6 kW (Omnion Corp.), one 4
kW (Trace Engineering)
Inverter Manufacturers: Omnion Corp. and Trace Engineering
Interconnection: Utility-Grid-Connected
Close-up view of curtain wall illustrates that BIPV
panels (dark panels) can be mounted
in exactly the same way as conventional glazing
(lighter panels).
3. Description
Traditionally, solar technologies have
been considered economical only in
remote areas far from power grids or in
areas with an unusually high amount of
sunlight. Advances in PV efficiency are
overturning these assumptions, allowing
solar electricity to be generated cost-
effectively even in the heart of the city.
In fact, PV is the most practical means of
generating renewable electricity in an
urban environment. Further, BIPV can be
directly substituted for other cladding
materials, at a lower material cost than
the stone and metal it replaces. As the
first major commercial application of
BIPV in the United States, 4 Times Square
points the way to large-scale production
of solar electricity at the point of greatest
use. The next major market for PV may
well be cities like New York that have both
high electricity costs and high-quality
buildings.
Special Design Considerations
The south and east facades of the 37th through the 43rd floor were designated
as the sites for the photovoltaic "skin.“ BIPV was incorporated into the design
after the tower’s general appearance had already been decided upon, so the
installation was made to harmonize with he established design concept
BIPV panels have been integrated into the
curtain wall instead of conventional glass
spandrel panels on the 37th through the
43rd floor.
The custom-made BIPV panels are visible in this
sidewalk view from Broadway.
4. PV System Configuration
The PV modules replace conventional spandrel glass in the south and
east facades. There are four different sizes of modules, and they
correspond to the spandrel sizes established earlier in the
design process.
PV Module Mounting and Attachment Details
The PV modules are attached to the building structure in exactly the
same way that standard glass is attached. The glass units are attached
with structural silicone adhesive around the back edge to an aluminium
frame. An additional silicone bead is inserted between the edges of
adjacent panels as a water seal. There is a separate electrical system for
each facade. Each system consists of two subsystems, feeding two 6-
kW inverters and one 4-kW inverter. The larger inverters serve the two
large-sized PV modules, which have electrical characteristics that are
different from those of the smaller ones. Using multiple inverters
enables the system to perform more efficiently. The inverters are
located in a single electrical closet at the core of the building. The AC
output of the inverters is transformed from 120 V to 480 V before being
fed into the main electrical riser.
4 Times Square during construction
5. Photovoltaic
Manufacturing Facility
Location: Fairfield, California
Owner: BP Solar
Date Completed: 1993
Architect & Designer: Kiss Cathcart Anders, Architects
Structural Engineers: Ove Arup & Partners
Electrical Engineers: Ove Arup & Partners
Tradesmen Required: Glaziers, electricians
Applicable Building Codes: BOCA and California Title 24
Applicable Electric Codes: National Electric Code
PV Product: Glass laminates as curtain wall spandrel,
skylight, and awning
Size: 9.5 kWp
Projected System Electrical Output: 7.9 kW
Gross PV Surface Area: 1,975 ft2
PV Weight: 3 lb/ft2
PV Cell Type: Amorphous silicon
PV Efficiency: 5%
PV Module Manufacturer: APS
Inverter Number and Size: 6 kW
Inverter Manufacturer: Omnion Corporation
Interconnection: Utility-Grid-Connected
Views looking north (top) and south show how
BIPV is integrated into both the facade and the
canopy that runs the length of the building.
6. Description
The heart of the project is a 22.5-ft-high
BIPV glass cube containing the factory’s
control center and visitor facilities. This
cube is perched on the second floor, and
half of it is outside of the manufacturing
building, emphasizing its status as an
independent element and a prototype that
demonstrates BIPV in a typical commercial
building. The cube’s PV cladding,
the solar entrance canopy, and the translucent
BIPV skylight provide more than enough
energy to power the control
centre's lighting and air-conditioning
systems. The entry court is paved in a pattern
of tinted concrete and uplighting that
represents an abstracted diagram of solar
energy generation.
Special Design Considerations
In addition to providing a working product development test bed for BIPV systems, the project serves an educational function for
public and private groups. The lobby/reception area provides display space for products and research. A pattern cast into the paving
in front of the main entry combines a sun path diagram with a representation of the photovoltaic effect at the atomic level. The
control room/cube also serves an educational
Interior view shows how BIPV is
used with vertical and sloped glazing
This office interior view demonstrates the
quality of light transmitted by the
approximately 5% translucent BIPV panel
skylight.
7. parapet beyond
Built-up roofing, min. slope 1/4" per 1'-0" to dra
Wood frame roof - See structural dwgs
Glu-lam beam
PV skylight
Parapet beyond
Built-up roofing
Tapered insulation
Metal deck
Scupper & D.S. beyond
Steel beam
Aluminum curtain wall
PV glass
Flashing
Elevator bulkhead beyond
Vision glass, tempered type D typ.
Braced frame beyond glass
Aluminum frame
Vision glass
GWB
Steel column
Wainscot
Concrete base @ column
Concrete slab
Spread footing beyond - see
structural dwgs
Stainless steel panel
Receptionist's booth
Footing beyond
Elevator pit beyond
Steel stair beyond
Expanded metal panel
Steel guardrail
Plastic coated wire
Oriented strand board
Integral duct
PV awning
Concrete walk
Vision glass ,
tempered glass, type B
, typ.
8. PV panel
Panel connection below
Purlin below
Panel wiring points typ. Light fixture below (25' O.C.)
Curved Stainless panel below
Vertical Stainless stiffener
PV panel
Purlins
Frame
Bracing rods
Light fixture
Stainless steel awning assembly
3352.8
above slab
2743.2
above slab
See structural drawings
for frame
dimensions
typ. PV spacing
typ. PV connection
point spacing
Typ. awning bay (see A06-A07 for locations)
Typ. braced bay (see A06-A07 for locations)
East end bay (West end opposite hand)
9. PV System Configuration
The PV module is a nominal 2.5 ft x 5.0 ft, a-Si thin-film
device rated at 50 Wp stabilized. The PV system contains 84
full-size modules mounted on the awning, 91 modules
installed in the curtain wall, and 8 in a skylight. The curtain
wall modules are installed in custom sizes as required by
architectural conditions. The system has a total capacity of 7.9
kW; because of the varying orientations of the modules, the
peak output is 5 kW. Despite the hot local climate, the power
consumed by the cube for cooling and lighting never exceeds
3.5 kW, producing a surplus of PV power which is directed
into the main building grid.
PV Module Mounting and Attachment Details
Standard PV modules are 31 in. x 61 in. but can be produced
in custom sizes as required to fit the framing requirements of
the curtain wall. One unique feature is that the modules are
glass-to glass laminated products. The modules are installed
with an insulated inner liner, which forms a plenum for
ventilation. Heat radiated into the curtain wall plenum is
vented to the outside by natural convection through holes
drilled in the horizontal mullions. In some cases, the hollow
vertical mullions are used as ducts to direct the warm air
upward.
Sectional view indicates skylight configuration and curtain-wall facade.
10. Academy of Further
Education Location: Herne, North Rhine-Westphalia, Germany
Owner: EMC, Ministry of Interiors of North Rhine-Westphalia, City of
Herne
Date Completed: May 1999
Architect & Designer: Jourda et Perraudin Architects, HHS Architects
Structural Engineers: Schleich, Bergermann and Partner
Electrical Engineers: HL-Technik
Tradesmen Required: Glaziers, electricians
PV Product: BIPV roof
Size: 1 MWp
Projected System Electrical Output: 750,000 kWh/yr
Gross PV Surface Area: 10,000 m2
PV Weight: 130 kg per each 3.2 m2 module
PV Cell Type: Polycrystalline and monocrystalline silicon
PV Efficiency: 12.8% to 16%
PV Module Manufacturer: Pilkington Solar International, Cologne
Inverter Number and Size: 600, 1.5 kW
Inverter Manufacturer and Model: SMA, Kassel
Interconnection: Utility-Grid-Connected
The Academy of Further Education under construction
in Herne, Germany
11. Description
As part of the International Construction
Exhibition, Emscher Park, the site of a
former coal mine in Herne, Germany, is
being used for a new purpose. A
comprehensive urban development plan is
providing the district of Sodingen with a
new centerpiece: the Academy of Further
Education, Ministry of Interior, North
Rhine Westphalia.
The large glass hall incorporates not only
the Academy but also a hotel, library, and
administrative municipal offices. The
glass hall is multifunctional. It protects
the interior from harsh weather and uses
solar energy both actively and passively
by producing heat as well as electric
power.
Special Design Considerations
Approximately 3,180 multifunctional roof and facade elements are the core of the solar
power plant. With a total area of 10,000 square meters, most of the roof and the
southwest facade is covered by photovoltaics, making this system the largest building-
integrated PV power plant in the world. It produces approximately 750,000 kWh of
electric power per year. This is enough to supply more than 200 private residences.
About 200,000 kWh is used directly by the Academy building, and the remaining
550,000 kWh is fed into the public power grid in Herne.
An inside view of the Academy building as
construction progressed
This photo shows how the PV panels are angled
to capture the sunlight shining on the roof.
12. PV System Configuration
The Optisol photovoltaic elements were produced by
Pilkington Solar at a site in Germany. The PV system
consists of solar cells embedded between glass panes.
Daylighting needs were taken into account in designing the
roof- and facade integrated system. The PV modules have
areas of 2.5 to 3.2 square meters and an output of 192 to
416 peak watts each. This makes them larger and more
powerful than most conventional solar modules.
Direct-current electricity is converted to 230 V alternating
current by means of a modular inverter. This is made up of
roughly 600 decentralized string inverters and allows
optimal use of the incident solar radiation.
PV Module Mounting and Attachment Details
The building-integrated photovoltaic panels are set into
aluminium mullions like skylights. The rooftop panels are
positioned at an angle to capture as much of the incident
sunlight as possible.
Rooftop view shows placement of insulation and PV
panels.
13. Ijsselstein Row
Houses
Location: Ijsselstein Zenderpark, Ijsselstein, The Netherlands
Date Completed: Scheduled for completion in late 2000
Architect & Designer: Han Van Zwieten, Van Straalen Architecten, co-
designer; Gregory Kiss, Kiss + Cathcart
Architects, co-designer
Structural Engineers: N/A
Electrical Engineers: N/A
Tradesmen Required: Building tradesmen
Applicable Building Codes: Dutch Building Code
Applicable Electrical Codes: Dutch Electrical Code
PV Product: Standard-size BIPV glass laminate panels
Size: 1.6 kWp per housing unit
Projected System Electrical Output: 1150 kWh/year per housing unit
Gross PV Surface Area: 30 m2 per housing unit
PV Weight: 3.75 lb/ft2
PV Cell Type: Amorphous silicon, both opaque and 15% translucent
PV Efficiency: 6%
PV Module Manufacturer: EPV
Inverter Number and Size: N/A
Inverter Manufacturer and Model: N/A
Interconnection: Utility-Grid-Connected
Fourteen planned new row-house units in the
Netherlands demonstrate the aesthetic use of
building-integrated photovoltaics: front (above)
and back views.
14. Description
The overall design is a composition of
brick volumes and two-level, wood framed
sunrooms. The latter are partially clad in
opaque and translucent PV units, and they
are raised and staggered to maximize solar
exposure. The sunroom volumes are wood-
panelled on the sides
facing north.
The Netherlands is home to some of the
most advanced PV systems in the world.
However, before this project began, little
work had been done on integrating solar
arrays into the prevailing Dutch
architectural idiom of abstract cubic forms.
The Ijsselstein row houses demonstrate
how photovoltaics can be a fully
participating element in the design, rather
than just an applied system. Amorphous
silicon modules in particular are generating
very positive responses among many Dutch
architects, who perceive them as looking
much more like an architectural material
than polycrystalline panels do
Special Design Considerations
In marked contrast to the United States, The Netherlands favors residential design that is
largely modern and rational in character. The ubiquitous pitched roofs of North American
houses (which provide convenient mounting surfaces for PV arrays) were considered
aesthetically undesirable at Ijsselstein. However, at higher latitudes with low sun angles,
vertically mounted BIPV panels can generate power at output levels competitive with those
of optimally angled panels. The design takes advantage of this by using standard-sized units
as glazing and exterior enclosure combined in a simple wooden frame wall.
Given that BIPV glass is a major cladding component for the sunroom elements,
excessive interior heat loss or gain was a significant design consideration. The
adjacent stair serves as a convection chimney that actually uses the heated
air produced in the sunrooms to draw air currents through the entire row house,
cooling it in warm weather. Cold weather conditions are addressed simply by providing a
suitable layer of insulation between the cladding and the interior finish.
15. PV System Configuration
A 1.6-kW, grid-connected BIPV system is
part of each row house. Each system will
be individually metered, and there is no
battery storage.
PV Module Mounting and
Attachment Details
Standard PV modules are set into a wood
framing system, which can be either site built
or prefabricated. The opaque units are set as
typical single glazing, using minimum-profile
glazing stops and caulk. The translucent panels
are incorporated into double-glazed window
units. The horizontal members of the wood
frame have an absolute minimum exposed
depth to prevent shadowing. The vertical
members, which are not as likely to interfere
with solar exposure, have a raised
profile.
new row-house units in the Netherlands demonstrate the aesthetic
use of
building-integrated photovoltaics