Fidelity Inspection provides quality control and inspection services with over 10 years of experience. They have specialists in 15 locations in China and inspect products in various industries including softlines, hardlines, electrical/electronics, and automotive. Services include audits, inspections, supplier development programs, and customized solutions. The company aims to ensure safety, quality and social responsibility for clients throughout the supply chain.
Mohamed Kheireddine Bencharif is seeking a new position. He has over 30 years of experience in quality inspection and non-destructive testing for the oil and gas industry. He is certified at the ASNT Level III in various non-destructive testing methods and as a Senior Welding Inspector. Currently he works as the Area Quality Control Manager for OGEC in Algeria, where he oversees quality activities on projects and performs audits. He is fluent in French and English and has worked on projects throughout Algeria and the Middle East.
This document provides a summary of Beltran Bryan B's work experience and qualifications. It lists his education, including graduating from Mapua Institute of Technology with a BS in Industrial Engineering, and work history in quality assurance, production, installation, and technical roles for TSL Marketing Corporation from 2012 to present. It also lists a previous role as Logistics Officer for Astec International from 2007 to 2007. The document provides detailed responsibilities and duties for each role.
This document provides a resume for Carlos Adrián Valdez Hernández. It summarizes his 8 years of experience in quality roles, including experience with new product introduction, quality system effectiveness and efficiency, and problem solving. His responsibilities involved quality plan creation, process validation, defect analysis, and continuous improvement. He holds a Bachelor's degree in Industrial Engineering and certifications in quality methodologies. References are available.
Chetan Sonani is an inspection and quality control professional with over 9 years of experience. He currently works as an Inspection Engineer for SABIC industries in Saudi Arabia. Previously he worked for Reliance Industries in India. He has extensive experience in non-destructive testing including radiographic, ultrasonic, dye penetrant, and magnetic particle testing. He is also skilled in welding inspection, quality management, and maintaining compliance with industry standards. Chetan aims to institute quality control techniques to achieve product excellence at lowest cost and resolve issues professionally.
CV Eng LTMuniz _QAQC Manager_ 11 Sep, 2016Leonardo Muniz
Leonardo has over 15 years of experience in quality assurance and control for engineering, procurement, fabrication and construction projects in oil & gas, petrochemicals and steel plants. He is experienced in developing and implementing quality management systems and leading quality teams to ensure projects meet requirements for scope, quality, timeline and budget. Currently, Leonardo works as a Project Quality Manager and is seeking new opportunities.
This resume is for Vadivelu Tamilselvan. He has over 25 years of experience in quality assurance and quality control roles in the oil and gas industry. His responsibilities have included ensuring supplier quality systems meet standards, conducting inspections and audits, reviewing documents, and overseeing quality control activities. He is currently a Project QA/QC Manager in Thailand through a contract with Norwegian Petroleum Consultant.
Ian Madine is an experienced coatings professional with over 24 years of experience working both onshore and offshore. He has successfully managed multiple projects supervising personnel in several countries. Madine has extensive experience working with various painting systems and fire protection products. He is skilled in client liaison, health and safety, project management, and quality assurance.
Uthia Bragasam is seeking a position as a Structural and Piping Lead Inspector in the offshore and marine industries. He has over 21 years of experience in quality management, inspection, and welding. His experience includes inspection of onshore and offshore construction projects, fabrication yards, vessel modifications, and more. He is skilled in welding inspection, materials inspection, pressure testing, and ensuring projects meet relevant codes and standards. Uthia Bragasam has worked on projects in various roles for many major oil and gas companies.
Mohamed Kheireddine Bencharif is seeking a new position. He has over 30 years of experience in quality inspection and non-destructive testing for the oil and gas industry. He is certified at the ASNT Level III in various non-destructive testing methods and as a Senior Welding Inspector. Currently he works as the Area Quality Control Manager for OGEC in Algeria, where he oversees quality activities on projects and performs audits. He is fluent in French and English and has worked on projects throughout Algeria and the Middle East.
This document provides a summary of Beltran Bryan B's work experience and qualifications. It lists his education, including graduating from Mapua Institute of Technology with a BS in Industrial Engineering, and work history in quality assurance, production, installation, and technical roles for TSL Marketing Corporation from 2012 to present. It also lists a previous role as Logistics Officer for Astec International from 2007 to 2007. The document provides detailed responsibilities and duties for each role.
This document provides a resume for Carlos Adrián Valdez Hernández. It summarizes his 8 years of experience in quality roles, including experience with new product introduction, quality system effectiveness and efficiency, and problem solving. His responsibilities involved quality plan creation, process validation, defect analysis, and continuous improvement. He holds a Bachelor's degree in Industrial Engineering and certifications in quality methodologies. References are available.
Chetan Sonani is an inspection and quality control professional with over 9 years of experience. He currently works as an Inspection Engineer for SABIC industries in Saudi Arabia. Previously he worked for Reliance Industries in India. He has extensive experience in non-destructive testing including radiographic, ultrasonic, dye penetrant, and magnetic particle testing. He is also skilled in welding inspection, quality management, and maintaining compliance with industry standards. Chetan aims to institute quality control techniques to achieve product excellence at lowest cost and resolve issues professionally.
CV Eng LTMuniz _QAQC Manager_ 11 Sep, 2016Leonardo Muniz
Leonardo has over 15 years of experience in quality assurance and control for engineering, procurement, fabrication and construction projects in oil & gas, petrochemicals and steel plants. He is experienced in developing and implementing quality management systems and leading quality teams to ensure projects meet requirements for scope, quality, timeline and budget. Currently, Leonardo works as a Project Quality Manager and is seeking new opportunities.
This resume is for Vadivelu Tamilselvan. He has over 25 years of experience in quality assurance and quality control roles in the oil and gas industry. His responsibilities have included ensuring supplier quality systems meet standards, conducting inspections and audits, reviewing documents, and overseeing quality control activities. He is currently a Project QA/QC Manager in Thailand through a contract with Norwegian Petroleum Consultant.
Ian Madine is an experienced coatings professional with over 24 years of experience working both onshore and offshore. He has successfully managed multiple projects supervising personnel in several countries. Madine has extensive experience working with various painting systems and fire protection products. He is skilled in client liaison, health and safety, project management, and quality assurance.
Uthia Bragasam is seeking a position as a Structural and Piping Lead Inspector in the offshore and marine industries. He has over 21 years of experience in quality management, inspection, and welding. His experience includes inspection of onshore and offshore construction projects, fabrication yards, vessel modifications, and more. He is skilled in welding inspection, materials inspection, pressure testing, and ensuring projects meet relevant codes and standards. Uthia Bragasam has worked on projects in various roles for many major oil and gas companies.
Ian Miller is a Quality Engineer seeking new opportunities. He has over 15 years of experience in quality engineering roles, most recently working for Caterpillar UK from 2009 to 2016 as a Quality Specialist Engineer. Prior to that, he held quality and service management roles at CMM (Great Britain) Limited and HK Technologies. He has extensive skills in quality documentation, continuous improvement, problem solving, and customer relations.
An experienced quality and engineering professional with over 20 years' experience in manufacturing, supply chain, and quality roles. Skilled in quality system development and auditing, root cause analysis, and supplier quality management. Currently offers contract services including quality, manufacturing, and supply chain expertise.
This document contains a summary of qualifications and experience for Anwardeen Jawaharlal, who is seeking a position as a QA/QC specialist in precast concrete products. He has over 16 years of experience in quality control and assurance roles for precast concrete factories in Dubai and Oman. His responsibilities have included establishing quality procedures, reviewing materials and testing, ensuring compliance with standards, and identifying improvements. He holds an M.Sc. in Chemistry and certifications in internal auditing and relevant standards.
This document provides a curriculum vitae for Balaji Radhakrishnan, who has over 7 years of experience as a QA/QC Inspector, Engineer, and Supervisor in oil and gas construction projects. He has worked on projects for companies like Saudi Aramco, SABIC, and MAADHEN. His responsibilities have included inspecting welding, piping installation, equipment, and materials to ensure compliance with quality standards and resolving any issues. He is approved to inspect welding by SABIC and Saudi Aramco. He holds an engineering degree and welding certification and has led QA/QC teams on multiple projects.
Paolo Vianello has over 25 years of experience in quality management, primarily in the aerospace industry. He is currently the Quality Manager at LINPAC Packaging UK, where he leads a team that maintains various quality certifications. Prior to this role, he held quality management positions at Airbus, Brookhouse Composites, and other aerospace companies. He has extensive experience with aerospace quality standards and is seeking a senior quality leadership role.
This document contains the contact information and employment history of Christopher Charles Taylor. It outlines his skills and experience in contract management, project management, production management, and health and safety. He has over 10 years of experience managing complex contracts and projects in the manufacturing sector, with a focus on timely delivery, budget management, and quality standards. His most recent roles include contract/project manager at Booth Industries and group leader/project manager at Benteler Ltd.
Sushil Kumar Jain has over 36 years of experience in quality assurance, quality control, project management, and inspection roles. He is currently the Chief Quality Assurance Manager at NeOz Energy Pvt. Ltd. in Ghaziabad, India, where he is responsible for ensuring compliance with quality plans and approving work procedures. Previously he has held quality management roles at manufacturing companies and engineering firms in India and the Middle East.
Syed Mukthar Ahamed is a senior HVAC and plumbing engineer and quality control inspector with over 15 years of experience. He has extensive knowledge of HVAC and plumbing systems including design, site implementation, quality inspections, and maintenance. Some of his responsibilities include inspecting plumbing systems, preparing design documents, coordinating projects, and ensuring work meets quality standards. He is proficient in AutoCAD, Microsoft Office, and has managed teams on projects in Saudi Arabia and Qatar.
- Teoderico C. Fernando is a civil engineer from the Philippines with over 19 years of construction experience, including 5 years working in a precast concrete factory in Saudi Arabia.
- He is currently a Senior QC Engineer at QANBAR DYWIDAG Precast Concrete Co. Ltd. in Saudi Arabia, where he ensures quality control and compliance with client and industry standards.
- Prior to his current role, Fernando held quality control and project management positions in Saudi Arabia and the Philippines, demonstrating a track record of safely and successfully delivering large construction projects on schedule and within budget.
Muralidhar has over 14 years of experience in supplier quality management. He is seeking a senior role in supplier quality or vendor quality management. He has experience managing suppliers in automotive, electronics, and other industries. His experience includes supplier audits, new product development, quality system audits, and ensuring compliance with standards like TS 16949.
Justin Rotert is seeking a position utilizing his skills in quality control, quality assurance, inspection, and non-destructive testing. He has over 10 years of experience performing various inspections including visual, radiography, magnetic particle, ultrasonic, and positive material identification. Rotert is certified in radiography, various non-destructive testing methods, and welding inspection, and has extensive knowledge of relevant codes and standards.
This document is a resume for Anant Shah that outlines his objective, skills, experience, areas of expertise, education, and volunteer experience. Shah has over 20 years of experience in quality assurance roles across various industries, including aerospace, medical, automotive, and defense. He is skilled in quality system standards like AS9100, ISO 9001, and TS16949. His experience includes roles as Quality Director, Quality Assurance Manager, and Quality Control Manager at several companies.
This document provides a summary of the career experience and qualifications of Randy Croteau, a Senior Completions Supervisor with over 35 years of experience in well completions, workovers, and field operations. It outlines his extensive experience managing projects around the world and key areas of expertise including people management, safety, project management, regulatory compliance, and financial management. The summary highlights leadership of multimillion dollar projects with a focus on cost control and examples of complex international projects involving well re-entry and upgrades.
The document is a resume for Naveen Kumar B S summarizing his career and qualifications. It outlines over 11 years of experience in production operations and manufacturing at Toyota Kirloskar Motor Pvt Ltd as well as a diploma in Mechanical Engineering and degrees in BBM and MBA in Production Management. It details his areas of expertise including quality assurance, process improvement, project management, and training. It also lists technical skills, equipment handling experience, and certifications in non-destructive testing.
JONE. WELDING piping inspector new ROPE ACCESS LEVEL 2Jone Prakash
D.Jone Prakash is a QA/QC piping inspector with over 6 years of experience in fabrication activities including oil rigs, oil refineries, boilers, and pressure vessels. He is currently employed by JML Maintenance PTE Ltd in Singapore and has worked on projects such as E-AMOX DRY END FACILITY. Prakash has extensive experience in weld inspection, ensuring compliance with quality standards, and effective communication. He is certified in welding inspection and various NDT methods.
This document contains a resume for Anwardeen Jawaharlal, who is seeking a position as a QA/QC specialist with over 15 years of experience in precast concrete products. He has worked in quality control roles for several companies in Oman, UAE, and India, establishing quality procedures and ensuring manufacturing meets standards. His responsibilities have included materials inspection, testing, documentation, auditing, and staff management. He has a M.Sc. in Chemistry and training in ISO auditing, and is proficient in various quality testing equipment, standards, and computer skills.
Felipe de Jesús Calleros has over 16 years of experience in manufacturing engineering roles across various industries including automotive, electronics, and plastics molding. He seeks a key position to contribute his skills and experience in meeting goals for safety, quality, cost, and delivery (SQCD). His qualifications include new product introduction engineering management, program/project management, product transfers between plants, managing cross-functional teams, materials sourcing, cost analysis, and lean manufacturing training. He has held roles such as engineering manager, project manager, and commodity manager at various companies and has a track record of on-time delivery, cost reductions, and new product launches.
Jimjith V P is a quality control inspector with over 7 years of experience in the field. He has a diploma in mechanical engineering and professional qualifications in welding inspection. He is currently working as a QC inspector for piping projects at Dragados Gulf Construction Co., where his responsibilities include performing quality control activities, generating work plans, and ensuring standards compliance. Previously, he has worked on various industrial projects in Saudi Arabia, managing quality inspection, documentation, and testing for piping fabrication and installation.
Profile of Kaixin pipeline technologies co.,ltdUpvcvalve
Industrial use RPP pipe system, PPH pipeline system used in industry, etc., and plate, valve series products such as: the diaphragm valve, butterfly valve, ball valve, globe valve, check valve, corrosion-resistant pumps and so on. The main materials are PPH, CPVC, PVDF, RPP, UPVC, etc.
Pragnesh Tandel has over 13 years of experience in quality assurance roles. He is currently an Assistant Manager of Quality Assurance at M/s. Wind World India Ltd., where he leads internal audits, supplier assessments, and quality monitoring and reporting. Previously he held quality roles at CMI FPE Ltd. and Waaree Instrument Ltd. Pragnesh has an engineering degree and quality management certifications. He is proficient in SAP QM and quality tools like auditing, inspection, and data analysis.
Choose the best Pre-Shipment Inspection in China!.pptxviccInspection
Looking for the most effective way to ensure the quality of your shipment? Wonder no more! Introducing Pre-Shipment Inspections - the ultimate solution for confirming your shipment's quality level. With 100% production completion and 80% of goods packed into cartons, we've got you covered.
1) The document discusses quality perspectives in the new world and delivering end-to-end agile quality. It outlines the need for agile quality management to facilitate product commercialization and continuous improvement.
2) It describes India's growing role in engineering and R&D spend globally and how the country is well-positioned to gain market share through 2020.
3) The "Agile Quality Evangelist" promotes establishing repeatable processes, capturing best practices, and transforming innovation through techniques like enterprise data commonization and knowledge management.
Ian Miller is a Quality Engineer seeking new opportunities. He has over 15 years of experience in quality engineering roles, most recently working for Caterpillar UK from 2009 to 2016 as a Quality Specialist Engineer. Prior to that, he held quality and service management roles at CMM (Great Britain) Limited and HK Technologies. He has extensive skills in quality documentation, continuous improvement, problem solving, and customer relations.
An experienced quality and engineering professional with over 20 years' experience in manufacturing, supply chain, and quality roles. Skilled in quality system development and auditing, root cause analysis, and supplier quality management. Currently offers contract services including quality, manufacturing, and supply chain expertise.
This document contains a summary of qualifications and experience for Anwardeen Jawaharlal, who is seeking a position as a QA/QC specialist in precast concrete products. He has over 16 years of experience in quality control and assurance roles for precast concrete factories in Dubai and Oman. His responsibilities have included establishing quality procedures, reviewing materials and testing, ensuring compliance with standards, and identifying improvements. He holds an M.Sc. in Chemistry and certifications in internal auditing and relevant standards.
This document provides a curriculum vitae for Balaji Radhakrishnan, who has over 7 years of experience as a QA/QC Inspector, Engineer, and Supervisor in oil and gas construction projects. He has worked on projects for companies like Saudi Aramco, SABIC, and MAADHEN. His responsibilities have included inspecting welding, piping installation, equipment, and materials to ensure compliance with quality standards and resolving any issues. He is approved to inspect welding by SABIC and Saudi Aramco. He holds an engineering degree and welding certification and has led QA/QC teams on multiple projects.
Paolo Vianello has over 25 years of experience in quality management, primarily in the aerospace industry. He is currently the Quality Manager at LINPAC Packaging UK, where he leads a team that maintains various quality certifications. Prior to this role, he held quality management positions at Airbus, Brookhouse Composites, and other aerospace companies. He has extensive experience with aerospace quality standards and is seeking a senior quality leadership role.
This document contains the contact information and employment history of Christopher Charles Taylor. It outlines his skills and experience in contract management, project management, production management, and health and safety. He has over 10 years of experience managing complex contracts and projects in the manufacturing sector, with a focus on timely delivery, budget management, and quality standards. His most recent roles include contract/project manager at Booth Industries and group leader/project manager at Benteler Ltd.
Sushil Kumar Jain has over 36 years of experience in quality assurance, quality control, project management, and inspection roles. He is currently the Chief Quality Assurance Manager at NeOz Energy Pvt. Ltd. in Ghaziabad, India, where he is responsible for ensuring compliance with quality plans and approving work procedures. Previously he has held quality management roles at manufacturing companies and engineering firms in India and the Middle East.
Syed Mukthar Ahamed is a senior HVAC and plumbing engineer and quality control inspector with over 15 years of experience. He has extensive knowledge of HVAC and plumbing systems including design, site implementation, quality inspections, and maintenance. Some of his responsibilities include inspecting plumbing systems, preparing design documents, coordinating projects, and ensuring work meets quality standards. He is proficient in AutoCAD, Microsoft Office, and has managed teams on projects in Saudi Arabia and Qatar.
- Teoderico C. Fernando is a civil engineer from the Philippines with over 19 years of construction experience, including 5 years working in a precast concrete factory in Saudi Arabia.
- He is currently a Senior QC Engineer at QANBAR DYWIDAG Precast Concrete Co. Ltd. in Saudi Arabia, where he ensures quality control and compliance with client and industry standards.
- Prior to his current role, Fernando held quality control and project management positions in Saudi Arabia and the Philippines, demonstrating a track record of safely and successfully delivering large construction projects on schedule and within budget.
Muralidhar has over 14 years of experience in supplier quality management. He is seeking a senior role in supplier quality or vendor quality management. He has experience managing suppliers in automotive, electronics, and other industries. His experience includes supplier audits, new product development, quality system audits, and ensuring compliance with standards like TS 16949.
Justin Rotert is seeking a position utilizing his skills in quality control, quality assurance, inspection, and non-destructive testing. He has over 10 years of experience performing various inspections including visual, radiography, magnetic particle, ultrasonic, and positive material identification. Rotert is certified in radiography, various non-destructive testing methods, and welding inspection, and has extensive knowledge of relevant codes and standards.
This document is a resume for Anant Shah that outlines his objective, skills, experience, areas of expertise, education, and volunteer experience. Shah has over 20 years of experience in quality assurance roles across various industries, including aerospace, medical, automotive, and defense. He is skilled in quality system standards like AS9100, ISO 9001, and TS16949. His experience includes roles as Quality Director, Quality Assurance Manager, and Quality Control Manager at several companies.
This document provides a summary of the career experience and qualifications of Randy Croteau, a Senior Completions Supervisor with over 35 years of experience in well completions, workovers, and field operations. It outlines his extensive experience managing projects around the world and key areas of expertise including people management, safety, project management, regulatory compliance, and financial management. The summary highlights leadership of multimillion dollar projects with a focus on cost control and examples of complex international projects involving well re-entry and upgrades.
The document is a resume for Naveen Kumar B S summarizing his career and qualifications. It outlines over 11 years of experience in production operations and manufacturing at Toyota Kirloskar Motor Pvt Ltd as well as a diploma in Mechanical Engineering and degrees in BBM and MBA in Production Management. It details his areas of expertise including quality assurance, process improvement, project management, and training. It also lists technical skills, equipment handling experience, and certifications in non-destructive testing.
JONE. WELDING piping inspector new ROPE ACCESS LEVEL 2Jone Prakash
D.Jone Prakash is a QA/QC piping inspector with over 6 years of experience in fabrication activities including oil rigs, oil refineries, boilers, and pressure vessels. He is currently employed by JML Maintenance PTE Ltd in Singapore and has worked on projects such as E-AMOX DRY END FACILITY. Prakash has extensive experience in weld inspection, ensuring compliance with quality standards, and effective communication. He is certified in welding inspection and various NDT methods.
This document contains a resume for Anwardeen Jawaharlal, who is seeking a position as a QA/QC specialist with over 15 years of experience in precast concrete products. He has worked in quality control roles for several companies in Oman, UAE, and India, establishing quality procedures and ensuring manufacturing meets standards. His responsibilities have included materials inspection, testing, documentation, auditing, and staff management. He has a M.Sc. in Chemistry and training in ISO auditing, and is proficient in various quality testing equipment, standards, and computer skills.
Felipe de Jesús Calleros has over 16 years of experience in manufacturing engineering roles across various industries including automotive, electronics, and plastics molding. He seeks a key position to contribute his skills and experience in meeting goals for safety, quality, cost, and delivery (SQCD). His qualifications include new product introduction engineering management, program/project management, product transfers between plants, managing cross-functional teams, materials sourcing, cost analysis, and lean manufacturing training. He has held roles such as engineering manager, project manager, and commodity manager at various companies and has a track record of on-time delivery, cost reductions, and new product launches.
Jimjith V P is a quality control inspector with over 7 years of experience in the field. He has a diploma in mechanical engineering and professional qualifications in welding inspection. He is currently working as a QC inspector for piping projects at Dragados Gulf Construction Co., where his responsibilities include performing quality control activities, generating work plans, and ensuring standards compliance. Previously, he has worked on various industrial projects in Saudi Arabia, managing quality inspection, documentation, and testing for piping fabrication and installation.
Profile of Kaixin pipeline technologies co.,ltdUpvcvalve
Industrial use RPP pipe system, PPH pipeline system used in industry, etc., and plate, valve series products such as: the diaphragm valve, butterfly valve, ball valve, globe valve, check valve, corrosion-resistant pumps and so on. The main materials are PPH, CPVC, PVDF, RPP, UPVC, etc.
Pragnesh Tandel has over 13 years of experience in quality assurance roles. He is currently an Assistant Manager of Quality Assurance at M/s. Wind World India Ltd., where he leads internal audits, supplier assessments, and quality monitoring and reporting. Previously he held quality roles at CMI FPE Ltd. and Waaree Instrument Ltd. Pragnesh has an engineering degree and quality management certifications. He is proficient in SAP QM and quality tools like auditing, inspection, and data analysis.
Choose the best Pre-Shipment Inspection in China!.pptxviccInspection
Looking for the most effective way to ensure the quality of your shipment? Wonder no more! Introducing Pre-Shipment Inspections - the ultimate solution for confirming your shipment's quality level. With 100% production completion and 80% of goods packed into cartons, we've got you covered.
1) The document discusses quality perspectives in the new world and delivering end-to-end agile quality. It outlines the need for agile quality management to facilitate product commercialization and continuous improvement.
2) It describes India's growing role in engineering and R&D spend globally and how the country is well-positioned to gain market share through 2020.
3) The "Agile Quality Evangelist" promotes establishing repeatable processes, capturing best practices, and transforming innovation through techniques like enterprise data commonization and knowledge management.
This document describes audit services offered by Xilia to bring growth, opportunities, and trust to the solar business. They offer basic, standard, and advanced audits. Basic audits include certification validation, certificate of product origin verification, and bill of materials verification. Standard audits add quality management verification, production technology evaluation, and financial report reviews. Advanced audits provide inline quality control during production through product quality inspections and process monitoring. Individual needs assessments are also available. The benefits are more confidence in brands, increased chance of winning tenders, and more efficient bankability reports.
How to Conduct a Successful Quality Control Inspection.pdfPLI Sorting
In the dynamic landscape of business, ensuring the quality of products and services is paramount to gaining a competitive edge. Successful organizations recognize the importance of a quality control inspection in maintaining high standards and meeting customer expectations. In this comprehensive guide, we delve into the intricacies of conducting a successful quality control inspection, shedding light on the significance and benefits of professional quality control inspection services.
Meet Veriquality, A Dedicated Third-Party Inspection Company in Chinamayoryyx
Product inspections, factory audits and laboratory testing services provided since 2008. We offer quality control solutions in China, India, Bangladesh, Vietnam, Pakistan and Malaysia.
With 10+ years of experience and 60+ dedicated inspectors, we have served 500+ customers from Americas, Europe, Oceania, Asia and Africa, large or small.
Visit www.veriquality.net for more details.
This document summarizes the third party inspection and quality assurance services provided by the company. The services include factory audits, sample picking and testing, initial production checks, in-production checks, random inspections, loading supervision, quality audits and indexing, advisory services, quantity and material audits, project risk analysis, and safety audits. The goal is to help clients improve product quality, reduce issues, and meet regulatory requirements through independent inspections and oversight at various stages of the production process.
Professional quality control provider,with rich experience, we offer a wide range of quality assurance services, covering factory audit, social compliance audit, pre-production inspection, during production inspection, pre-shipment inspection, and loading supervision as well.
Supplier Evaluation- Before outsourcing the project, it is your responsibility to know much about your supplier like- who they are and are they able to deliver on their promises. Be aware of the middle man as they cannot ensure the quality or performance. You should directly contact a manufacturing team. It ensures the capabilities and conditions of a manufacturer.
This document provides an overview of Total Quality Management (TQM) presented by Prof. Raghavendran.V. It begins with defining quality and explaining that TQM aims to integrate fundamental management techniques to improve all processes within an organization. The professor then discusses the basic principles of TQM, including management commitment, customer focus, employee involvement, and continuous improvement. The document traces the evolution of approaches to quality, from inspection to quality control to quality assurance to TQM. It also outlines some obstacles to implementing TQM and provides assignment questions at the end.
The document provides an overview of quality, including definitions, dimensions, and the evolution and history of quality. It defines quality as meeting customer needs and expectations. Key dimensions of quality include tangibles, reliability, responsiveness, assurance, and empathy. The evolution of quality moved from inspection to statistical control to total quality management as organizations increasingly focused on prevention and involving all employees. Future challenges include partnerships, adaptability, sustainability, and customization.
This document outlines the mission, values, strategy, and capabilities of Al-Deena, an industrial valves and fittings supplier in Pakistan. It establishes Al-Deena's commitment to quality, health/safety, and customer satisfaction through an effective quality management system. The company aims to provide cost-effective solutions and expertise in automation to improve customers' operations. Key business sectors include oil/gas, power, construction, chemicals and others.
This document provides an overview of quality concepts including definitions of quality, dimensions of quality, total quality management, quality costs, and quality circles. It defines quality as meeting customer expectations and fitness for use. Quality dimensions include performance, reliability, durability, serviceability, aesthetics, features, and conformance to standards. Total quality management focuses on continual improvement through customer satisfaction. Quality costs are categorized as prevention, appraisal, internal failure, and external failure costs. Quality circles involve voluntary employee groups that work to identify and solve quality problems. Basic quality circle steps and roles are outlined along with seven common quality tools.
The document provides an overview of quality, including its history and importance. It discusses the evolution of quality practices from the Industrial Revolution through modern approaches like Total Quality Management and Six Sigma. Key figures who advanced quality concepts are also highlighted. The document then covers quality certifications, dimensions of quality, costs of quality, and problem-solving methodologies like the PDCA cycle.
Role of qa&qc in manufacturing presentationImran Jamil
This document discusses quality control, quality assurance, and quality improvement concepts. It provides examples of quality control and quality assurance activities in manufacturing, such as inspections, audits, and process documentation. Quality control focuses on inspection and testing to find defects, while quality assurance aims to prevent defects by improving processes. Quality improvement is about continuously studying processes to identify and implement solutions to problems. The goal is to create systems that prevent errors from occurring.
A details introduction of quality, its elements, Cost of Poor Quality and difference in Quality Control and Quality Assurance.
To download these slides please visit my site:
http://www.xubitech.com/
JS Sourcing is a sourcing company that helps customers find reliable vendors and ensures high quality products. It aims to fulfill customer demands through expert advice and premium quality products. JS Sourcing prides itself on continuous improvement and upholding customer satisfaction. Its mission is to be a partner of choice through quality products, compliance with regulations, and excellent customer service.
This document provides an overview of basic quality management concepts including total quality management (TQM). It discusses key aspects of TQM such as the customer and supplier focus, benefits which include lower costs and satisfied customers, and costs such as prevention and inspection costs. Historical contributors to TQM are also summarized, including Deming's emphasis on statistical process control and prevention of errors, Juran's quality trilogy approach, and Crosby's zero defects philosophy.
This document provides an overview of basic quality management concepts and tools. It discusses key topics such as the concept of quality, quality dimensions, product and service quality, inspection, statistical quality control, quality assurance, total quality management, and the contributions of quality pioneers like Deming, Juran, Crosby, and Taguchi. Common quality management tools are also defined, including check sheets, histograms, scatter diagrams, Pareto charts, control charts, cause-and-effect diagrams, five whys, 5S's, kaizen, JIT, quality circles, Gantt charts, and balanced scorecards.
Creating an Approved Supplier Program as a Prerequisite for a Successful HACC...TraceGains
If you have any questions or comments, please send them to connect@tracegains.com. We look forward to hearing from you.
Meeting Description:
Hazards come from two places; we add them or we receive them from our suppliers.
What should we expect from an effective supplier management program? Who is ultimately responsible for the safety of the products & materials received from our suppliers? How confident are we when we justify the control of a hazard as being through our approved supplier program? What percentage of recalls is traced to supplier issues?
HACCP requires that you:
-Identify those suppliers critical to food safety and quality
-Perform a hazard assessment and define the hazards
-Identify the potential risk and significance of the hazard
-Justify our decision based on facts, scientific information and historical data
Learn how to use your existing supplier data to:
-Automatically manage supplier compliance issues
-Continuously improve supplier performance
-Better manage supplier audits
Presenters:
Debby Newslow, President, D.L. Newslow & Associates, Inc.
Presentation: Prerequisite requirement programs for successful supplier management
Gary Nowacki, CEO, TraceGains
Presentation: Automating supplier document, risk, and compliance management
Project quality management aims to ensure projects fulfill requirements. Quality is the degree to which project deliverables meet requirements. Accuracy measures correctness while precision measures exactness. Managing quality involves auditing works periodically, while controlling quality evaluates deliverables against standards and metrics. Common quality theories include zero defects, fitness for use, and continuous improvement. Quality is not achieved through unnecessary additions but by providing what customers request. Prevention is more effective than inspection for ensuring quality.
Similar to Presentation Of Fidelity Inspection (20)
1. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Company Background
n Over 10 years experience in quality control.
n Best service at competitive price
n Over 50 specialists in 15 locations around the China
n Mission Statement
In an independent, impartial, objective and honest manner, Fidelity Inspection help ensure
the safety, quality, and social responsibility of our client’s products at every stage of the
supply chain by relying on our industry specific knowledge, experience and capability .
CONFIDENCE. DELIVERED
2. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Our Industry
n Softlines
l Textile, apparel, accessories, home textile, footwear, bags, leather and fabric
n Hardlines
l Hardware, DIY, houseware, furniture, toys, handicrafts, sporting goods, automotive parts, building products,
cosmetic, valve, tool sets, juvenile products, promotional items, gifts and sundries
n Electrical & Electronic
l Audio &video products and accessories
l Luminaries
l Household
l electrical tools
l Telecommunication
l Others
n Auto, Equipment & Machinery
l Motorcycles, Wheels, Auto Engine, Cranes, Forklifts, Tractor, Power Station Equipment, Pip Making Machinery,
Food Processing Machinery, etc
CONFIDENCE. DELIVERED
3. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Service Summary
nAudit nCustomized Quality Program
l Factory Audit (Technical audit) l Product Specification Preparation
l Social Compliance Audit l Factory Visit Accompanying
l C-TPAT l Lab Test Coordination
l Customized Audit l Sample Evaluation
l Sustainability Audit
nInspection nSupplier Development
l Auditing
l Pre-production Inspection
l Quality Training
l During production Inspection
l EHS Improvement Programme
l Pre-shipment Inspection
l Continuous improvement programme
l Loading Supervision
l Sorting Inspection
l Sample Collection
CONFIDENCE. DELIVERED
4. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Audit Service
n Factory Audit
ü Benefits:
Ensures appropriate suppliers are being selected
ü Capability: ISO9001 , GMP, HACCP, TS16949
ü Key check points:
n Manufactures‘ identification & background
n Manpower
n Production capability
n Machinery, facilities & equipment
n Manufacturing process & production lines
n In-house quality control system such as testing & inspection
n Management system & capability
n Environment
CONFIDENCE. DELIVERED
5. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Audit Service
nSocial Compliance Audit
ü Benefits:
Companies with international business operations are increasingly held accountable not only for their own
performance but also for the performance of their international supply chain. Audit will ensure your suppliers fully
comply with social responsibility
ü Capability: SA8000,ETI,BSCI,WRAP,ICTI,FLA
ü Key check points:
n Child labor n Working hours
n Forced labor n Social benefits
n Discrimination n Safety and health
n Minimum wage n Dormitories
n Overtime wage n Protection of the environment
CONFIDENCE. DELIVERED
6. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Audit Service
n C-TPAT Audit
ü Benefits:
Ensure any merchandise shipments going to USA is in accordance with C-TPAT requirements.
ü Description:
Customs & Trade Partnership against Terrorism (CTPAT), a joint US government and business voluntary
program to build cooperative relationships that strengthen the global supply chain and border security by
improving the security for the transportation of persons, conveyances and cargo throughout the commercial
process.
ü Key check points:
n Conveyance Security
n Container Security
n Physical Access Controls
n Personnel Security
n Procedural Security
n Physical Security
n Security Training and Threat Awareness
n Information Technology Security
CONFIDENCE. DELIVERED
7. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Audit Service
n Customized Audit
ü Benefits:
Ensure the potential suppliers if meet the client’s benchmark in specific area.
ü Description:
For some clients, they will set up owner standard or specific criteria to evaluate the suppliers. Or the client want to
know the specific area of supplier’s strengths and weakness. Fidelity Inspection offers combination and custom audits
that include elements from any mix of the audits , designed for your specific requirements and budget.
ü Key check points:
n Background of the supplier
n Product process
n Key facility
n Key department
n Business history
n Credit information
n Financial status
n Other specific points
CONFIDENCE. DELIVERED
8. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Audit Service
n Sustainability Audit
ü Benefits:
Meet the growing consumer demand for ethically-made and eco-friendly products, minimize the hazardous impact of
products upon the environment and society, demonstrate compliance to hazardous substances regulations, enhance
risk management and brand protection, identify and realize sustainable cost savings across the supply chain.
ü Description:
Corporate Sustainability is a business approach that creates long-term shareholder value, improves performance by
removing waste and manages risk. It considers the interrelationship of economic, environmental and social issues. For
example, a product using hazardous chemicals creates liability and social issues across the supply chain. This could
include workers who may become ill at manufacturing sites or distribution enters, and consumers who may have
adverse reactions to the product. Water supplies and soil may become contaminated from improper disposal of
products and substances, creating negative long-term environmental affects. Economically, what initially appeared to
be an inexpensive substance in a product is now a far more costly issue generating potential risk and liability. For
consumer products, key sustainability issues include chemical management, carbon offset, eco-friendly packaging and
environmental concerns such as energy usage, waste disposal, and recycle as, we can help you assess
your supplier and integrate these key areas into a customized sustainability program.
CONFIDENCE. DELIVERED
9. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Inspection Service
n Pre-production Inspection
ü Benefits:
This service allows an early prevention of defective materials / components / accessories /
finished products and immediate corrections
ü Description:
At the beginning of the production process, we do a visual check on the quality of components, materials,
accessories, semi-finished and finished products against client specifications and/or reference samples, to predict
any possible problems and make recommendations, and so as to verify that your product specifications are being
met early.
ü Key check points:
n Factory’s production lines & capability
n Factory’s facilities & equipment
n Raw materials, main components and accessories
n Semi-finished products
n Some finished products
CONFIDENCE. DELIVERED
10. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Inspection Service
n During Production Inspection
ü Benefits:
This service ensures that the quality of products is maintained throughout the production phase, to further pinpoint
problems that need earlier correction before completion of the whole consignment.
ü Description:
When at least 20% - 30% of goods have been completed, we do a visual check on the quality of semi-finished and
finished products against client specifications and/or reference samples.
ü Key check points:
n The production status during the manufacturing process
n The semi-finished and finished products at random
n The production lines & capability
n The package details and packing material
n Make recommendations
CONFIDENCE. DELIVERED
11. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Inspection Service
n Pre-shipment Inspection
ü Benefits:
This service ensures finished products are in accordance with specifications
ü Description:
A Pre-shipment Inspection is basically an acceptance sampling inspection performed when goods are 100%
completed, packed and ready for shipment. Our inspectors randomly select samples from finished goods,
according to an inspection level requested in accordance with international statistical standards known as MIL-
STD-105E (ISO2859-1) .
ü Key check points:
n Quantity available
n Style & color
n Workmanship (general appearance)
n Functions & safety
n Size specification, if required
n Package details
n Shipping mark
CONFIDENCE. DELIVERED
12. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Inspection Service
n Sorting Inspection
ü Benefits:
This service ensures each piece of finished products meets specified quality requirements .
ü Description:
When goods are finished, 100% Inspection can be carried out before packaging or after packaging according to
your request. Our inspectors check piece by piece for all conditions like general appearance, workmanship,
functions, safety and other points required by clients, sorting out all defectives and finally sealing goods which
pass inspection with stickers.
CONFIDENCE. DELIVERED
13. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Inspection Service
n Loading Supervision
ü Benefits:
This service ensures containers are in good condition and secured with seals after loading, to reduce a high risk of
product substitution.
ü Description:
When loading, our inspectors arrive at factories, warehouses or loading places to check product information,
quantity and packaging; supervise the whole loading process and help the manufacturer finish loading under
correct and clear working clauses and working processes.
ü Key check points:
n Record the weather/ arrival time of container/ container No./ truck No.
n Check the inner & outer condition of container to see if there is any damage/ wetness/ perforation / peculiar
smell
n Check the quantity of goods loaded and record the condition of outer packaging (master cartons/ pallets)
n Randomly select and open some cartons to verify that the goods meet the customer’s specifications
n Supervise the whole loading process
n Seal the container with the customs’ seal
n Record the seal Nos. and departure time of container
CONFIDENCE. DELIVERED
14. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Inspection Service
n Sample Collection
ü Benefits:
The service ensures that product samples taken from the production line randomly and is not prepared by
supplier intentionally for testing or pre-shipment sample review.
ü Description:
On clients’ request, select product samples at a factory during inspection or other sampling location without
inspection by our inspectors. Those selected product samples will be forwarding to a client, or to laboratory
appointed by the client for testing.
CONFIDENCE. DELIVERED
15. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Customer Value Added Service
n Specification Preparation
ü Benefit
The technical product specification would let all the parties involved in the production and inspection to
better know the products’ requirement. It is helpful for the factory to improve the product quality and
efficiency, to save the communication time and avoid any misunderstanding as well.
ü Description
Preparation of comprehensive specifications for component and product ensures the client’s criteria for
performance and workmanship would let all the parties involved in the production and inspection to
better know the products’ requirement. Fidelity Inspection Service help clients to prepare the product
specification based on approval samples. The service will save the clients’ resources and reduce
manpower cost.
ü Key Check Points
n The product size specification
n The style and color specification
n The test criteria
n The packing specification
CONFIDENCE. DELIVERED
16. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Customer Value Added Service
n Factory Accompanied Visit Service
As part of our extensive support package, we can set up meetings, organise internal flights and car
hire.We can arrange hotel accommodation, all at prices that are much lower than online booking.
Use our highly experienced staff to assist you whilst in China
What’s in it for you?
You understand what happens at any meeting. Successful outcomes rely on the ability of both sides to
fully understand each other. This not only applies to language but also business culture. You have
continuity – your interpreter is a “business partner”
What we do
Our bilingual staff with technical background accompany clients on business visits in China.
We offer more than just interpreting. Our staff are trained in International Business and will help with
negotiation and ensure that you fully understand what is happening throughout any meeting.This is
further reinforced by a comprehensive debrief and written report.
Will you risk your business success with an untried, casual interpreter?
CONFIDENCE. DELIVERED
17. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Customer Value Added Service
n Lab Test Coordination
ü Benefits:
Based on our expertise for the product and network of test lab, we will help you to find low price
but reliable testing lab.
ü Description:
We can pick up some samples randomly from production and send them in our partner third-
party laboratories.
ü Key check points:
n Different Lab price negotiation
n Test sample picking up
n Test standard recommendation
CONFIDENCE. DELIVERED
18. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Customer Value Added Service
n Sample Evaluation
Send samples to our office for evaluation before mass production against to your
specification.
It will save the express cost and time of turnaround for you. After evaluation, we
will issue report and photos for your reference, and also will provide our suggestion
for sample and production.
CONFIDENCE. DELIVERED
19. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Supplier Development Service
n Auditing
ü Benefits:
Find your supplier ‘s gap to your specific criteria and help your supplier
continuing improvement.
ü Description:
Fidelity Inspection help your suppliers to find the gap to your benchmark through the
adoption of corrective action , preventive action . The auditing service
collaboratively with suppliers to find their shortcoming improve or expand
their capabilities.
ü Key check points:
n ISO 9001-2008 n Process Audit
n TS16949 n In-process Inspection
n SA8000 n APQP
n ISO13458&GMP n Corrective Action
CONFIDENCE. DELIVERED
20. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Supplier Development Service
n Quality Training
ü Benefits:
In order for the client to adequately assess and aid suppliers in improving quality.
ü Description:
Education and training is the most common approach to supplier development and improvement.
A purchaser may provide training in statistical process control, quality improvement techniques,
just-in-time delivery or any other crucial performance area
ü Key check points:
n Quality Management Systems n PFMEA/ Control Plan/ MSA
n PPAP process n SPC-Basic
n APQP n Inspection Plans
CONFIDENCE. DELIVERED
21. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Supplier Development Service
n Social Compliance Improvement Program
ü Benefits:
Help your supplier to meet the brand’s social compliance benchmark.
ü Description:
Fidelity Inspection helps your suppliers come to understand a brand’s Code standards and
expectations proactively, before a potentially costly audit cycle begins. Fidelity Inspection will
translates the Code into concrete benchmarks, common obstacles to compliance, how to self-
assess and address gaps for a successful business partnership
ü Key check points:
n Workplace health& safety
CONFIDENCE. DELIVERED
22. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Supplier Development Service
n Continuous Quality Improvement Program
ü Benefits:
Enables benchmarking of supplier’s performance, Identifies potential quality issues before they
impact the customer, Drives supplier’s agility and ability to provide leading edge products &
services.
ü Description:
This program is applied to the suppliers with a goal of developing the supplier’s overall
performance to the point where a supplier clearly understands the client’s direction and drives
their own improvements to align with the client’s technology, cost, delivery and quality of products
ü Key check points:
n Key Process Analysis
n 5S approach to workplace
n Total Productive Maintenance
CONFIDENCE. DELIVERED
23. Website: www.fidelityinspection.com Email: sales@fidelityinspection.com
Why Fidelity Inspection Service
n Deep Industry Knowledge and Specialized Expertise
ü With deep industry knowledge and specialized expertise in quality control, we provide the quality control
services that you can trust.
n Competitive Price
ü We offer the most competitive prices in the industry. Inspection price starts at USD180.00 per man-day
and discount may also be offered based on promised business volume.
n Highly Flexible Scheduling
ü Generally, an inspection can be scheduled on a two day’s notice, unlike 5 days required by other
companies.
n Smooth and Quick Communication
ü We can be reached "24 hours a day, 7 days a week". All reports will be issued within 24 hours after the job
is done. All questions will be answered promptly and all comments will be heard!
n Serve with Integrity and quality
ü Integrity is highly valued at Fidelity Inspection and all employees are required to be honest and fair in all
business activities and are held responsible for the quality of their work.
CONFIDENCE. DELIVERED