This document discusses generating electricity through a speed breaker mechanism. It begins by noting that energy conservation is the cheapest new source of energy. The system converts the kinetic energy of passing vehicles into electricity using a movable speed breaker connected to a rack and pinion mechanism. This generates rotary motion that produces electricity. The document then explains the working principles and design of the system. It was modeled in AutoCAD and tested with different loads and speeds. The conclusion is that this project provides a best source of energy from daily life.
Appropriate technology in less developed countries
Provide energy related facilities
Localize appropriate technology Educate Local people theory withpractice.
Establish social enterprise.
This presentation is an introduction to the sustainable energy challenge. It gives an overview over fossil fuels, the laws of energy, energy efficiency and conservation, and renewable energy sources. The focus is on providing students with the scientific tools for understanding the magnitude of the challenge and analyzing potential solutions.
Appropriate technology in less developed countries
Provide energy related facilities
Localize appropriate technology Educate Local people theory withpractice.
Establish social enterprise.
This presentation is an introduction to the sustainable energy challenge. It gives an overview over fossil fuels, the laws of energy, energy efficiency and conservation, and renewable energy sources. The focus is on providing students with the scientific tools for understanding the magnitude of the challenge and analyzing potential solutions.
many countries are going to harvest the renewable energies from the biosphere. Renewable energy sources are the alternate to the fossil fuels.. so we must go towards the renewable energy sources.
We Are representing An environmentally friendly water wheel pump that utilizes the energy of a flowing water body to pump water. With the growing need for more eco-friendly technology around the world. This Water Pump Will Not b needing any electricity or human effort for pumping water. Very cost-effective method to pump water 24hr a day.
Engineering plays vital role in the fast running world. Technology plays significant role in the production of new things in day to day world. Energy storage is the main key to rule this technological world today. This work mainly focuses to diminish the energy shortage using the human energy with rocking chair mechanism. In this work, the energy generated will be continuous. This work focuses on the use of the human exercising effort and converts it to energy generation. The strategy serves to give complete body workout with zero side effects. In this work, the rocking chair mechanism and ratchet pawl mechanism are utilized to convert the human energy into electrical energy completely. The armchair is associated with wheel using the swing support. The ratchet and pawl mechanism are mounted in this setup makes to rotate wheel in clockwise direction. The wheel turns clockwise direction will be associated with the wheel pulley assembly. Based on the rotatory motion of the wheel, the wheel pulley assembly transfers the human energy to the alternator connected with it. The alternator is utilized to convert and transmits the energy to the battery. The battery will be utilized to store the energy. Many countries utilize the human efforts to convert to energy generation and complete workout. This work mainly focuses also on the energy generation for future needs and also in the emergency situations. This work is an emerging technology. This method of energy generation is less cost, pollution free and helps to convert the human energy in useful way. The energy generation using this method is mainly to fulfill the needs emergency and also in daily needs. Lavanyan. R | Gabriel. A | Suganth. V | R Joseph Bensingh "Energy Generation using Rocking Chair" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-4 , June 2021, URL: https://www.ijtsrd.compapers/ijtsrd42386.pdf Paper URL: https://www.ijtsrd.comengineering/other/42386/energy-generation-using-rocking-chair/lavanyan-r
this ppt will give you an idea about generating electricity by using the frictional force produced by the vehicle tyres in contact with the road, while it is in motion
many countries are going to harvest the renewable energies from the biosphere. Renewable energy sources are the alternate to the fossil fuels.. so we must go towards the renewable energy sources.
We Are representing An environmentally friendly water wheel pump that utilizes the energy of a flowing water body to pump water. With the growing need for more eco-friendly technology around the world. This Water Pump Will Not b needing any electricity or human effort for pumping water. Very cost-effective method to pump water 24hr a day.
Engineering plays vital role in the fast running world. Technology plays significant role in the production of new things in day to day world. Energy storage is the main key to rule this technological world today. This work mainly focuses to diminish the energy shortage using the human energy with rocking chair mechanism. In this work, the energy generated will be continuous. This work focuses on the use of the human exercising effort and converts it to energy generation. The strategy serves to give complete body workout with zero side effects. In this work, the rocking chair mechanism and ratchet pawl mechanism are utilized to convert the human energy into electrical energy completely. The armchair is associated with wheel using the swing support. The ratchet and pawl mechanism are mounted in this setup makes to rotate wheel in clockwise direction. The wheel turns clockwise direction will be associated with the wheel pulley assembly. Based on the rotatory motion of the wheel, the wheel pulley assembly transfers the human energy to the alternator connected with it. The alternator is utilized to convert and transmits the energy to the battery. The battery will be utilized to store the energy. Many countries utilize the human efforts to convert to energy generation and complete workout. This work mainly focuses also on the energy generation for future needs and also in the emergency situations. This work is an emerging technology. This method of energy generation is less cost, pollution free and helps to convert the human energy in useful way. The energy generation using this method is mainly to fulfill the needs emergency and also in daily needs. Lavanyan. R | Gabriel. A | Suganth. V | R Joseph Bensingh "Energy Generation using Rocking Chair" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-4 , June 2021, URL: https://www.ijtsrd.compapers/ijtsrd42386.pdf Paper URL: https://www.ijtsrd.comengineering/other/42386/energy-generation-using-rocking-chair/lavanyan-r
this ppt will give you an idea about generating electricity by using the frictional force produced by the vehicle tyres in contact with the road, while it is in motion
Design of Rocking Chair for Energy Generation PurposeYogeshIJTSRD
This paper mainly focuses on the design of rocking chair for energy generation purpose. Energy plays key role in daily life to satisfy the needs. Technology development is gradually increasing day by day. The traditional method of energy consumption is getting down due to high energy demand. In order to satisfy the need of energy, the new method of energy consumption technique is discussed in this chapter. Lavanyan. R | Anil Raj. M | Joseph Bensingh. R | Natarajan. S | Gabriel. A | Suganth. V "Design of Rocking Chair for Energy Generation Purpose" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45019.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/45019/design-of-rocking-chair-for-energy-generation-purpose/lavanyan-r
The International Journal of Engineering and Science (The IJES)theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
The International Journal of Engineering and Science (The IJES)theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Energy crisis are of special attention now-a-days. In this project presents a new system configuration of the front-end rectifier stage for a hybrid Hydro/wind/photovoltaic energy system. This system allows the three sources to supply the load separately or simultaneously depending on the availability of the energy sources. In household power generation wind and solar are the general hybrid energy options, which are used. But the overhead water tank is one of the neglected energy generation sources which are available in normal household and commercial places. In today’s world each and every source of energy has to be utilized. Therefore we are trying to use the stored energy in overhead water tank for power generation. Solar and Wind energy will contribute major part of power generation. Generated power will be stored in the battery which sources power to inverter and inverter to load. It gives us multiple sources of energy and also helps us to recover some amount of energy which is stored in overhead water tank.
An interactive approach for solar energy system:design and manufacturing IJECEIAES
The energy production in the word is a very complex problem with decreasing the pollution. Therefore, the aim is to find an optimal solution, this research focuses on the development and the optimization of parabolic concentrator using an interactivity approach and virtual design tools. Recently, several works have been developed in this area. In this study, a new conception, design Optimization approach has been involved in system energy design including new concept. The design strategy has been successfully applied to design problems. The optimizer tool developed for based on Heuristic: Gravitational Search Algorithm. The results of the presented in this paper are significant in the system energy design, which presents an effective approach of development by reducing the cost of installation, the time of analysis by increasing the radiation and solar flux concentrated within the parabola generating an increase in accumulated energy.
Multi turbine micro hydro power generationIjrdt Journal
Increase in human population has increased the demand for energy. Fossil fuels are the major source to meet the world energy requirements, but its rapidly dwindling supply and its adverse effects on our ecological system are of major concern. In India over 70 % of the electricity generated is from coal based power plants. Other renewable such as wind, geothermal, solar, and hydroelectricity represent a 2% share of the Indian fuel mix. Fossil fuels (coal) are a major source of power production in India. Our concept features the run of river active setup of micro hydro power generation using simple gear mechanism. This concept is based on the collection of mechanical energy from two rotors spinning by the effect of higher river velocity and transmission of power from the rotors to a small pinion gear which runs the generator shaft, through two large driver gears attached to the shafts of two rotors. This method of power production is comparatively simpler than others. The objectives of our project include low cost, higher output, environment friendly power production, multiple setups in one row, and decrease the power shortage in India.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...
Power generation from speed breaker
1. ABSTRACT
Man in his life time, uses energy in one form or the other. In fact whatever happens in
nature, results, out of the conversion of energy in one form or the other. The blowing of the
wind, the formation of the clouds and the flow of water are a few examples that stand
testimony to this fact. The extensive usage of energy has resulted in an energy crisis, and
there is a need to develop methods of optimal utilization, which will not only ease the crisis
but also preserve the environment. Energy conservation is the cheapest new source of energy.
This project attempts to show how energy can be tapped and used at a commonly used
system, the generation of electricity through the speed breaker mechanism.
Generation of electricity through the speed breaker mechanism is one of the most
recent power generation concepts. This device converts the kinetic energy of the vehicles into
electric energy by installing movable speed breaker on the road, it takes the stroke motion of
the vehicles and converts it to the rotary motion by rack and pinion mechanism and it
generates the electricity.
This project also explains clearly, the working principle of the designed system, its
practical implementation, and its advantages. Design of each component has been carried out
using standard procedures, and the components have been fabricated and assembled. A
similar model of the system has been modeled using Auto CAD 2007. Practical testing of the
system has been done with different loads at different speeds. The utilization of energy is an
indication of the growth of a nation. One might conclude that to be materially rich and
prosperous, a human being needs to consume more and more energy. And this project is best
source of energy that we get in day to day life.