Plastifloor system with membrane hard topcoat (gb)
•
0 likes•36 views
Plastifloor is a floor coating system for dry areas in the food industry. It consists of a primer, membrane coating, and two sealers that are applied in stages. The system dries quickly and can support vehicle traffic just two hours after the final sealer application, providing a durable and easy to install floor coating option for the food industry.
Report
Share
Report
Share
Download to read offline
Recommended
Plastifloor system with membrane hard topcoat for warehouses (gb)
Plastifloor 418 is a floor coating system for warehouses and loading zones that consists of four layers - a primer, membrane, coating, and sealer. It is easy to install and can support vehicle traffic just two hours after application. The system includes Plastifloor 112 primer, 332 membrane with quartz broadcast, 418 coating mixed with quartz filler, and 522 clear sealer pigmented with 10% filler.
Plastifloor system with membrane hard topcoat for warehouses (usa)
Plastifloor 418 is a floor coating system for warehouses and loading zones that consists of four products - a primer, membrane, sealer coating, and top coat. The top coat can be driven on just two hours after installation. It has a primer, membrane with sand broadcast, sealer coat, and top coat that is pigmented and has quartz broadcast into it before fully curing.
Ruredil PBO Data Sheet
FRP for masonry, stone, flat/curved arch terracotta and cindercrete stabilization with a Class A Fire Rating for interior, exterior, and above or below grade (wet) applications.
Building products presenation (2)
This document provides information on autoclaved aerated concrete (AAC) blocks, including their properties, advantages over other building materials like concrete and bricks, and applications. AAC blocks are lightweight, strong, fire resistant and provide good insulation. They also use waste materials like fly ash and require less energy to produce than clay bricks. The document discusses AAC block production processes and gives details on jointing mortars, waterproofing solutions, plasters and other building products from the company.
Fairbond cs
FAIRBOND CS is preweighed solvent free epoxy resin system consisting of base & hardner. The components differ in colour thus allowing visual assessment of mixing.
POLYGLASS ZIPCOAT
Zipcoat is a two-part, multi-monomer polyester glassflake coating that provides corrosion protection in aggressive environments. It has excellent application properties and can be applied in single coats with good edge coverage when spray applied. Zipcoat dries quickly, including at sub-freezing temperatures, and is suitable for protecting structural steel, bridges, ships, and pipelines. It requires specialized cleaning solvents and has limitations for some chemical and high-temperature environments.
Corroglass AR4
High performance engineering glass flake filled composites using resin technology tailormade for the process environment.
Typical applications: refurbishment and protection of heavy duty capital equipment including pumps, valves, water boxes, heat exchanger tube faces, spool pieces, filters, strainers and auxiliary equipment.
Industrial flooring
This document provides information on various floor and wall coating products from LightDuty Floor& Wall Coatings. It describes multiple polyurethane, epoxy resin, and polyurethane floor coating systems that offer properties like chemical resistance, abrasion resistance, flexibility, slip resistance, and ease of cleaning. The coatings have a range of applications in industrial, commercial, and institutional settings depending on the specific product. Technical data on properties like bond strength, hardness, and permeability are also provided for each coating.
Recommended
Plastifloor system with membrane hard topcoat for warehouses (gb)
Plastifloor 418 is a floor coating system for warehouses and loading zones that consists of four layers - a primer, membrane, coating, and sealer. It is easy to install and can support vehicle traffic just two hours after application. The system includes Plastifloor 112 primer, 332 membrane with quartz broadcast, 418 coating mixed with quartz filler, and 522 clear sealer pigmented with 10% filler.
Plastifloor system with membrane hard topcoat for warehouses (usa)
Plastifloor 418 is a floor coating system for warehouses and loading zones that consists of four products - a primer, membrane, sealer coating, and top coat. The top coat can be driven on just two hours after installation. It has a primer, membrane with sand broadcast, sealer coat, and top coat that is pigmented and has quartz broadcast into it before fully curing.
Ruredil PBO Data Sheet
FRP for masonry, stone, flat/curved arch terracotta and cindercrete stabilization with a Class A Fire Rating for interior, exterior, and above or below grade (wet) applications.
Building products presenation (2)
This document provides information on autoclaved aerated concrete (AAC) blocks, including their properties, advantages over other building materials like concrete and bricks, and applications. AAC blocks are lightweight, strong, fire resistant and provide good insulation. They also use waste materials like fly ash and require less energy to produce than clay bricks. The document discusses AAC block production processes and gives details on jointing mortars, waterproofing solutions, plasters and other building products from the company.
Fairbond cs
FAIRBOND CS is preweighed solvent free epoxy resin system consisting of base & hardner. The components differ in colour thus allowing visual assessment of mixing.
POLYGLASS ZIPCOAT
Zipcoat is a two-part, multi-monomer polyester glassflake coating that provides corrosion protection in aggressive environments. It has excellent application properties and can be applied in single coats with good edge coverage when spray applied. Zipcoat dries quickly, including at sub-freezing temperatures, and is suitable for protecting structural steel, bridges, ships, and pipelines. It requires specialized cleaning solvents and has limitations for some chemical and high-temperature environments.
Corroglass AR4
High performance engineering glass flake filled composites using resin technology tailormade for the process environment.
Typical applications: refurbishment and protection of heavy duty capital equipment including pumps, valves, water boxes, heat exchanger tube faces, spool pieces, filters, strainers and auxiliary equipment.
Industrial flooring
This document provides information on various floor and wall coating products from LightDuty Floor& Wall Coatings. It describes multiple polyurethane, epoxy resin, and polyurethane floor coating systems that offer properties like chemical resistance, abrasion resistance, flexibility, slip resistance, and ease of cleaning. The coatings have a range of applications in industrial, commercial, and institutional settings depending on the specific product. Technical data on properties like bond strength, hardness, and permeability are also provided for each coating.
Forton VF-774 Long-Term Durability Study
Forton VF-774 is the time tested material for GFRC. This presentation highlights the long-term durability testing of VF-774 versus other acrylics and SBRs used in GFRC matrices.
DIY Epoxy Floor Coating
This document provides information on Mirakote 340-1AB, a two component water based epoxy floor coating. It protects concrete from moisture, stains, grease and cracks while providing a seamless, impervious surface. The system includes a primer coat and two finish coats. Product data and application instructions are provided for the primer and finish coats. Calculations demonstrate how to determine material quantities needed for a given floor area.
Durapatch data sheet
This document provides information on a novolac epoxy paste called DURAPATCH that is designed for quickly patching, sealing, and repairing cracks, holes, and leaks. It can repair surfaces made of metal, plastic, fiberglass, and concrete. DURAPATCH cures within minutes, allowing for reduced downtime. It is suitable for field and machine shop repairs. The paste is self-priming, trowelable, sands and machines well, and has excellent bonding strength for many commercial and residential repairs. The kit contains resin, hardener, and a trowel for mixing and applying the product.
11. portaguard- explo groupperu
PortaGuard is a temporary flooring membrane that provides strong protection of soils from contamination. It has a bursting strength of 950 lbs, can withstand hydrostatic pressures up to 800 psi, and shows no material changes after 8,000 hours of weathering. PortaGuard is also lightweight at 3.33 oz per square foot, can be shipped in rolls up to 50 feet wide and 600 feet long, and is the most durable environmental protection membrane in the industry. It is made in the USA from polyester fabric and a tri-polymer alloy coating.
Silvershield data sheet
This document provides product data for SilverShield 5000X, a two-part epoxy coating with zinc flakes. It can be used indoors or outdoors to protect surfaces like pipes, tanks, and structural steel from corrosion. The coating has excellent adhesion and flexibility, provides a metallic silver finish, and protects in temperatures from -18 to 121 degrees Celsius. It is a 100% solids coating that is easy to apply by spray, brush, or roller in thicknesses between 4-12 mils.
Rollomatgold
Roll-O-Mat produces various types of automatic roll filter media for air filters, including Roll-O-Mat Gold, Blue, Green, and Red. The different media types vary in material (fiberglass or synthetic fibers), thickness (1/2 to 2 inches), adhesive coating, and maximum operating temperature (up to 300°F for Roll-O-Mat Red). All media are 65 feet long and have a tinted side to indicate air flow direction. Roll-O-Mat Gold has the highest fiber density and compression strength for maximum filtration performance.
Pipeseal data sheet
PIPESEAL is an epoxy paste designed to quickly seal cracks, holes, and leaks in pipes made of materials like copper, steel, lead, and cast iron. It hardens within 5 minutes when applied and heated with a heat gun. PIPESEAL is 100% solids with no VOCs, making it environmentally friendly. It can seal leaks up to 1/2 inch in diameter and withstand pressures over 1200 psi. To use, the resin and hardener must be thoroughly mixed together and applied to the leak, then heated to cure fully within minutes.
Elastaseal data sheet
This document summarizes the properties and application of ELASTASEAL, a flexible epoxy coating designed for applications requiring high elongation. ELASTASEAL can tolerate expansion and contraction, adjusts to freeze-thaw cycles, and provides corrosion protection for surfaces like cooling towers, expansion joints, and concrete. It is a 100% solids, solvent-free coating that offers excellent adhesion and flexibility with elongation up to 300%. ELASTASEAL can be applied to surfaces like metal, concrete, wood, and geotextiles, and is suitable for uses like tank linings, secondary containment, and crack repair.
Rubber
This document discusses the properties and applications of rubber as an insulating material. Rubber has high tensile strength, hardness, and resistance to alkalies, weak acids, oil, solvents, oxygen, ozone, and certain chemicals. It is water repellent but its structure loosens when subjected to heat. Commonly available forms include foam rubber sheets, ribbed smoked sheets, crepe rubber sheets, and solid rubber blocks. Rubber has been used as an insulator since 1870 due to its tightly bound electrons that do not conduct electricity well. Its main applications as an insulator include electrical and thermal insulation in mats, gloves, and flooring.
Panseal paste grade data sheet
PANSEAL Paste Grade is a two-component, no-VOC epoxy paste designed for steel tank repairs. It bonds well to steel, concrete, and other surfaces. It can seal cracks and leaks and is suitable for vertical and overhead applications due to its thick viscosity. PANSEAL Paste Grade dries hard in 8 hours at room temperature and can be topcoated within 14 days or machined after curing.
Nu glaze specifications – technical data
RX320 is an unplasticised PVC compound designed for outdoor profiles that can last up to 5 years depending on processing and environmental conditions. It has a density of 1.47 g/cm3, Shore D hardness of 84, tensile strength of 40 MPa, and elongation of 25%. NU-GLAZE 600 is a fast curing, low modulus silicone sealant recommended for use in building joints and glazing applications. It adheres well to various substrates, cures within 15 minutes, and can withstand temperatures from -50 to 100 degrees Celsius.
Failure of composites
This document discusses common failures in composite restorations and their causes. Failures include discoloration, recurrent caries, sensitivity, and fracture. Causes of failure include incomplete caries removal, inadequate etching and acid removal, excess or uneven bonding agent application, poor isolation, contamination, improper curing, and insufficient finishing/polishing. Guidelines to minimize failure include small cavity preparations, avoiding sharp angles, using bases in deep cavities, strict isolation, adequate curing from all sides, and placing composite in thin increments.
Panseal gallon data sheet
PANSEAL is a unique epoxy coating formulated for corrosion protection of surfaces like cooling towers, storage tanks, and AHU drain pans. It seals leaks immediately, has a high-solids formula that is solvent-free and fire rated. PANSEAL bonds well to surfaces even under less than ideal conditions, provides excellent chemical resistance, and is suitable for uses like tank linings, pipeline coating, and corrosion protection of steel, concrete, and other materials. It offers properties like flexibility, adhesion, and resistance to chemicals, moisture, abrasion, and temperatures from -20 to 250 degrees Fahrenheit.
Canopus Crompton-Responsive Industries
Canopus Crompton using safety wet room flooring applications are hospitals, clinics, child care and many more. http://www.responsiveindustries.com/
CORROGLASS AR VEILCOAT
Corroglass AR VEILCOAT has been specially formulated to offer the best resistance to base environments, e.g. Sodium Hydroxide and Sodium Hypochlorite, the resin and cure system having been modified to impart the optimum resistance to these environments. Corroglass AR Veilcoat is to be used as a surface veil in certain applications where the glass present in the AR4 may be attacked by the environment.
SILICON FIBRES AND ITS USAGE ON TEXTILE IN DIFFERENT FINISHING APPLICATIONS
SILICON FIBRES AND ITS USAGE ON TEXTILE IN DIFFERENT FINISHING APPLICATIONS INDIAN INSTITUTE OF TECHNOLOGY DELHI (IIT-DELHI)
SILICON CHEMICAL USAGE AS FINISHING AGENT IN TEXTILE PROCESSING FOR SOFTENERS ,WATER AND OIL REPELLENTS ,AND DIFFERENT TECHNICAL AND FUNCTIONAL APPLICATIONS , SILICON APPLICATION IN DAILY LIFEProbond resin
Sparkler UK brochure
U.K.Office: Palmcroy House
387,London Road, Croydon
Surrey, CRO 3PB.
Phone: (+44) 020 8689 0863
Fax : (+44) 020 8689 6016
E-mail: info@sparkler-filters.co.uk
Brochure valid up to ~2009
In reality this was a cartridge from Parker
Homogeneous Flooring Responsive Industries
Aquaris RQ® is a compact, homogeneous flooring material with a 3D quartz crystal design. It has a 2 mm thick wear layer and is treated with RQ Protect, which provides scratch resistance and eliminates the need for waxing or polishing. It is available in sheet and tile formats, comes in various colors, and is suitable for heavy traffic areas such as healthcare facilities.
Sodium lignosulfonate grade three technical data sheet(gac na ls-3)
Sodium lignosulfonate is a yellow brown powder that is completely water soluble and contains sulfo and carboxyl groups, giving it good water solubility, surfactant properties, and dispersion capacity. It can be used in construction materials, ceramics, mining, textiles, metallurgy, oil drilling, and as an animal feed additive due to its antimicrobial properties. Sodium lignosulfonate specifications include a pH between 4-6 and minimum dry matter, water insoluble substance, and water reducing capacity requirements. It can be used as an additive in concrete, lead batteries, ceramics, roads, drilling mud, plasterboard, and as a binder for various powders and
Hydrocolloids
This document discusses reversible hydrocolloids, which are polysaccharide colloidal suspensions used for dental impressions. Reversible hydrocolloids exist as either a sol or gel, transitioning between the two states during the impression process. They are extracted from seaweeds and set via cooling and physical bonding. Examples include agar, which is supplied in tubes or syringes and sets in the mouth. Reversible hydrocolloids are dimensionally unstable due to water absorption and evaporation, but provide accurate impressions and are easy to use.
Plastifloor Park Deck Waterproofing System_Flyer
Plastifloor 800 PD is a waterproofing and protection system for concrete park decks. It consists of a primer, waterproofing membrane, drivable base coat, and colored sealer. The system offers high performance including crack bridging, chemical resistance, fast curing, and durability. It is suitable for new construction and refurbishment of damaged deck coatings. The system is applied to the prepared concrete in multiple layers that are troweled, rolled, and sealed to create a waterproof and slip resistant surface.
Plastifloor Bridge Deck Waterproofing System_Flyer
Plastifloor PUMMA resins are hybrid resins from MMA and PU. They are used for bridge deck repairs and overlays as well for waterproofing coatings on steel or concrete bridges. Plastifloor resins are approved by TÜV SÜD.
More Related Content
What's hot
Forton VF-774 Long-Term Durability Study
Forton VF-774 is the time tested material for GFRC. This presentation highlights the long-term durability testing of VF-774 versus other acrylics and SBRs used in GFRC matrices.
DIY Epoxy Floor Coating
This document provides information on Mirakote 340-1AB, a two component water based epoxy floor coating. It protects concrete from moisture, stains, grease and cracks while providing a seamless, impervious surface. The system includes a primer coat and two finish coats. Product data and application instructions are provided for the primer and finish coats. Calculations demonstrate how to determine material quantities needed for a given floor area.
Durapatch data sheet
This document provides information on a novolac epoxy paste called DURAPATCH that is designed for quickly patching, sealing, and repairing cracks, holes, and leaks. It can repair surfaces made of metal, plastic, fiberglass, and concrete. DURAPATCH cures within minutes, allowing for reduced downtime. It is suitable for field and machine shop repairs. The paste is self-priming, trowelable, sands and machines well, and has excellent bonding strength for many commercial and residential repairs. The kit contains resin, hardener, and a trowel for mixing and applying the product.
11. portaguard- explo groupperu
PortaGuard is a temporary flooring membrane that provides strong protection of soils from contamination. It has a bursting strength of 950 lbs, can withstand hydrostatic pressures up to 800 psi, and shows no material changes after 8,000 hours of weathering. PortaGuard is also lightweight at 3.33 oz per square foot, can be shipped in rolls up to 50 feet wide and 600 feet long, and is the most durable environmental protection membrane in the industry. It is made in the USA from polyester fabric and a tri-polymer alloy coating.
Silvershield data sheet
This document provides product data for SilverShield 5000X, a two-part epoxy coating with zinc flakes. It can be used indoors or outdoors to protect surfaces like pipes, tanks, and structural steel from corrosion. The coating has excellent adhesion and flexibility, provides a metallic silver finish, and protects in temperatures from -18 to 121 degrees Celsius. It is a 100% solids coating that is easy to apply by spray, brush, or roller in thicknesses between 4-12 mils.
Rollomatgold
Roll-O-Mat produces various types of automatic roll filter media for air filters, including Roll-O-Mat Gold, Blue, Green, and Red. The different media types vary in material (fiberglass or synthetic fibers), thickness (1/2 to 2 inches), adhesive coating, and maximum operating temperature (up to 300°F for Roll-O-Mat Red). All media are 65 feet long and have a tinted side to indicate air flow direction. Roll-O-Mat Gold has the highest fiber density and compression strength for maximum filtration performance.
Pipeseal data sheet
PIPESEAL is an epoxy paste designed to quickly seal cracks, holes, and leaks in pipes made of materials like copper, steel, lead, and cast iron. It hardens within 5 minutes when applied and heated with a heat gun. PIPESEAL is 100% solids with no VOCs, making it environmentally friendly. It can seal leaks up to 1/2 inch in diameter and withstand pressures over 1200 psi. To use, the resin and hardener must be thoroughly mixed together and applied to the leak, then heated to cure fully within minutes.
Elastaseal data sheet
This document summarizes the properties and application of ELASTASEAL, a flexible epoxy coating designed for applications requiring high elongation. ELASTASEAL can tolerate expansion and contraction, adjusts to freeze-thaw cycles, and provides corrosion protection for surfaces like cooling towers, expansion joints, and concrete. It is a 100% solids, solvent-free coating that offers excellent adhesion and flexibility with elongation up to 300%. ELASTASEAL can be applied to surfaces like metal, concrete, wood, and geotextiles, and is suitable for uses like tank linings, secondary containment, and crack repair.
Rubber
This document discusses the properties and applications of rubber as an insulating material. Rubber has high tensile strength, hardness, and resistance to alkalies, weak acids, oil, solvents, oxygen, ozone, and certain chemicals. It is water repellent but its structure loosens when subjected to heat. Commonly available forms include foam rubber sheets, ribbed smoked sheets, crepe rubber sheets, and solid rubber blocks. Rubber has been used as an insulator since 1870 due to its tightly bound electrons that do not conduct electricity well. Its main applications as an insulator include electrical and thermal insulation in mats, gloves, and flooring.
Panseal paste grade data sheet
PANSEAL Paste Grade is a two-component, no-VOC epoxy paste designed for steel tank repairs. It bonds well to steel, concrete, and other surfaces. It can seal cracks and leaks and is suitable for vertical and overhead applications due to its thick viscosity. PANSEAL Paste Grade dries hard in 8 hours at room temperature and can be topcoated within 14 days or machined after curing.
Nu glaze specifications – technical data
RX320 is an unplasticised PVC compound designed for outdoor profiles that can last up to 5 years depending on processing and environmental conditions. It has a density of 1.47 g/cm3, Shore D hardness of 84, tensile strength of 40 MPa, and elongation of 25%. NU-GLAZE 600 is a fast curing, low modulus silicone sealant recommended for use in building joints and glazing applications. It adheres well to various substrates, cures within 15 minutes, and can withstand temperatures from -50 to 100 degrees Celsius.
Failure of composites
This document discusses common failures in composite restorations and their causes. Failures include discoloration, recurrent caries, sensitivity, and fracture. Causes of failure include incomplete caries removal, inadequate etching and acid removal, excess or uneven bonding agent application, poor isolation, contamination, improper curing, and insufficient finishing/polishing. Guidelines to minimize failure include small cavity preparations, avoiding sharp angles, using bases in deep cavities, strict isolation, adequate curing from all sides, and placing composite in thin increments.
Panseal gallon data sheet
PANSEAL is a unique epoxy coating formulated for corrosion protection of surfaces like cooling towers, storage tanks, and AHU drain pans. It seals leaks immediately, has a high-solids formula that is solvent-free and fire rated. PANSEAL bonds well to surfaces even under less than ideal conditions, provides excellent chemical resistance, and is suitable for uses like tank linings, pipeline coating, and corrosion protection of steel, concrete, and other materials. It offers properties like flexibility, adhesion, and resistance to chemicals, moisture, abrasion, and temperatures from -20 to 250 degrees Fahrenheit.
Canopus Crompton-Responsive Industries
Canopus Crompton using safety wet room flooring applications are hospitals, clinics, child care and many more. http://www.responsiveindustries.com/
CORROGLASS AR VEILCOAT
Corroglass AR VEILCOAT has been specially formulated to offer the best resistance to base environments, e.g. Sodium Hydroxide and Sodium Hypochlorite, the resin and cure system having been modified to impart the optimum resistance to these environments. Corroglass AR Veilcoat is to be used as a surface veil in certain applications where the glass present in the AR4 may be attacked by the environment.
SILICON FIBRES AND ITS USAGE ON TEXTILE IN DIFFERENT FINISHING APPLICATIONS
SILICON FIBRES AND ITS USAGE ON TEXTILE IN DIFFERENT FINISHING APPLICATIONS INDIAN INSTITUTE OF TECHNOLOGY DELHI (IIT-DELHI)
SILICON CHEMICAL USAGE AS FINISHING AGENT IN TEXTILE PROCESSING FOR SOFTENERS ,WATER AND OIL REPELLENTS ,AND DIFFERENT TECHNICAL AND FUNCTIONAL APPLICATIONS , SILICON APPLICATION IN DAILY LIFEProbond resin
Sparkler UK brochure
U.K.Office: Palmcroy House
387,London Road, Croydon
Surrey, CRO 3PB.
Phone: (+44) 020 8689 0863
Fax : (+44) 020 8689 6016
E-mail: info@sparkler-filters.co.uk
Brochure valid up to ~2009
In reality this was a cartridge from Parker
Homogeneous Flooring Responsive Industries
Aquaris RQ® is a compact, homogeneous flooring material with a 3D quartz crystal design. It has a 2 mm thick wear layer and is treated with RQ Protect, which provides scratch resistance and eliminates the need for waxing or polishing. It is available in sheet and tile formats, comes in various colors, and is suitable for heavy traffic areas such as healthcare facilities.
Sodium lignosulfonate grade three technical data sheet(gac na ls-3)
Sodium lignosulfonate is a yellow brown powder that is completely water soluble and contains sulfo and carboxyl groups, giving it good water solubility, surfactant properties, and dispersion capacity. It can be used in construction materials, ceramics, mining, textiles, metallurgy, oil drilling, and as an animal feed additive due to its antimicrobial properties. Sodium lignosulfonate specifications include a pH between 4-6 and minimum dry matter, water insoluble substance, and water reducing capacity requirements. It can be used as an additive in concrete, lead batteries, ceramics, roads, drilling mud, plasterboard, and as a binder for various powders and
Hydrocolloids
This document discusses reversible hydrocolloids, which are polysaccharide colloidal suspensions used for dental impressions. Reversible hydrocolloids exist as either a sol or gel, transitioning between the two states during the impression process. They are extracted from seaweeds and set via cooling and physical bonding. Examples include agar, which is supplied in tubes or syringes and sets in the mouth. Reversible hydrocolloids are dimensionally unstable due to water absorption and evaporation, but provide accurate impressions and are easy to use.
What's hot (20)
SILICON FIBRES AND ITS USAGE ON TEXTILE IN DIFFERENT FINISHING APPLICATIONS
SILICON FIBRES AND ITS USAGE ON TEXTILE IN DIFFERENT FINISHING APPLICATIONS
Sodium lignosulfonate grade three technical data sheet(gac na ls-3)
Sodium lignosulfonate grade three technical data sheet(gac na ls-3)
More from Plasti-Chemie GmbH
Plastifloor Park Deck Waterproofing System_Flyer
Plastifloor 800 PD is a waterproofing and protection system for concrete park decks. It consists of a primer, waterproofing membrane, drivable base coat, and colored sealer. The system offers high performance including crack bridging, chemical resistance, fast curing, and durability. It is suitable for new construction and refurbishment of damaged deck coatings. The system is applied to the prepared concrete in multiple layers that are troweled, rolled, and sealed to create a waterproof and slip resistant surface.
Plastifloor Bridge Deck Waterproofing System_Flyer
Plastifloor PUMMA resins are hybrid resins from MMA and PU. They are used for bridge deck repairs and overlays as well for waterproofing coatings on steel or concrete bridges. Plastifloor resins are approved by TÜV SÜD.
Fallstudie Plastifloor Boden in einem REWE Markt in Lauf
Plastifloor Harze können hervorragend für die Sanierung von Lebensmittelabteilungen in Kaufhallen eingesetzt werden, da diese Reaktionsharze schnell aushärten und der neue Boden bereits 2 h nach der Versiegelung wieder voll belastbar ist.
Plastifloor Boden als Fallstudie in der Feinkostherstellung
Plastifloor Böden sind eine ideale Lösung für die Sanierung von Böden in der Feinkostherstellung. Der neue Plastifloor Boden kann über das Wochenende eingebaut werden und ist bereits 2 h nach der Versiegelung wieder voll belastbar.
Plastifloor Systemdatenblatt Einstreubelag 418 mit Membrane, R13.pdf
Wie wird ein Plastifloor Einstreubelag R 13 für Schlacht- und Verarbeitungsbetriebe aufgebaut? Plastifloor Harze sind schnell härtenden MMA Harze.
Plastifloor Systemdatenblatt Einstreubelag 418 mit Membrane, R11.pdf
Wie baue ich einen Plastifloor Einstreubelag R 11 aus? Plastifloor Harze sind schnell härtende Metacrylatharze und werden in vielen Industriezweigen verwendet. Plastifloor ist made in Germany.
Plastifloor Systemdatenblatt Kellenbelag mit Membrane, R10.pdf
Wie wird ein Plastifloor Kellenbekag mit Rutschfestigkeitsklasse R10 aufgebaut? Plastifloor harze sind schnell härtende Metacrylatharze, hergestellt von Plasti Chemie in Deutschland.
Plasti Chemie presentation 2022 (engl)
Plasti-Chemie produces Plastifloor and Plastipur resin coatings for industrial and commercial flooring applications. Their resins cure quickly, within 1-2 hours for Plastifloor and 6-7 hours for Plastipur. The company has production facilities in Germany and the US, shipping resins worldwide in drums, pails, and other containers. Plastifloor resins are methacrylate-based and offer high chemical resistance for applications such as parking decks, ship decks, and more. Installation involves surface preparation, application of primers and mortars, then coatings and sealers. Plasti-Chemie offers training and technical support for applicators.
Plastifloor Products and Systems
Plastifloor produces MMA and PUMMA resin flooring systems in Germany. The resins were developed in 1995 and have proven effective in tough industrial and commercial conditions due to their fast curing, hygienic, and durable properties. Plastifloor offers a variety of resin products for primers, base coats, sealers, and topcoats that are customized for different substrate types and performance requirements.
Plasti Chemie presentation 2022 ENG
Plasti Chemie is manufacturing fast curing Plastifloor and Plastipur resins since 1995. Plastifloor Plastipur and Plastistone resins are shipped into 50 countries. Check out also www.plasti-chemie.de
Plastifloor Böden Fallstudie im Fleischhandel
Plastifloor, schnell härtende Beläge für die Viehwirtschaft
Plastifloor Fallstudie Pharmazie Boden
glatte, leicht zu reinigende Böden werden in der Pharmazie benötigt.
Plastifloor Fallstudie Landwirtschaft
Bei der Milchabfüllung, im Stall und bei der Mast. Plastifloor Böden sind dabei.
Plastifloor Fallstudie Industrie Boden Milchwerke
In der Lebensmittelindustrie werden Plastifloor Böden häufig eingebaut.
Plastifloor Fallstudie Industrie Boden Geiger
Für schnelle Sanierungen von Industrieböden eignen sich die Plastifloor Harze.
More from Plasti-Chemie GmbH (20)
Plastifloor Bridge Deck Waterproofing System_Flyer
Plastifloor Bridge Deck Waterproofing System_Flyer
Fallstudie Plastifloor Boden in einem REWE Markt in Lauf
Fallstudie Plastifloor Boden in einem REWE Markt in Lauf
Plastifloor Boden als Fallstudie in der Feinkostherstellung
Plastifloor Boden als Fallstudie in der Feinkostherstellung
Plastifloor Systemdatenblatt Einstreubelag 418 mit Membrane, R13.pdf
Plastifloor Systemdatenblatt Einstreubelag 418 mit Membrane, R13.pdf
Plastifloor Systemdatenblatt Einstreubelag 418 mit Membrane, R11.pdf
Plastifloor Systemdatenblatt Einstreubelag 418 mit Membrane, R11.pdf
Plastifloor Systemdatenblatt Kellenbelag mit Membrane, R10.pdf
Plastifloor Systemdatenblatt Kellenbelag mit Membrane, R10.pdf
Recently uploaded
LA HUG - Video Testimonials with Chynna Morgan - June 2024
Have you ever heard that user-generated content or video testimonials can take your brand to the next level? We will explore how you can effectively use video testimonials to leverage and boost your sales, content strategy, and increase your CRM data.🤯
We will dig deeper into:
1. How to capture video testimonials that convert from your audience 🎥
2. How to leverage your testimonials to boost your sales 💲
3. How you can capture more CRM data to understand your audience better through video testimonials. 📊
The Evolution and Impact of OTT Platforms: A Deep Dive into the Future of Ent...
This presentation provides a thorough examination of Over-the-Top (OTT) platforms, focusing on their development and substantial influence on the entertainment industry, with a particular emphasis on the Indian market.We begin with an introduction to OTT platforms, defining them as streaming services that deliver content directly over the internet, bypassing traditional broadcast channels. These platforms offer a variety of content, including movies, TV shows, and original productions, allowing users to access content on-demand across multiple devices.The historical context covers the early days of streaming, starting with Netflix's inception in 1997 as a DVD rental service and its transition to streaming in 2007. The presentation also highlights India's television journey, from the launch of Doordarshan in 1959 to the introduction of Direct-to-Home (DTH) satellite television in 2000, which expanded viewing choices and set the stage for the rise of OTT platforms like Big Flix, Ditto TV, Sony LIV, Hotstar, and Netflix. The business models of OTT platforms are explored in detail. Subscription Video on Demand (SVOD) models, exemplified by Netflix and Amazon Prime Video, offer unlimited content access for a monthly fee. Transactional Video on Demand (TVOD) models, like iTunes and Sky Box Office, allow users to pay for individual pieces of content. Advertising-Based Video on Demand (AVOD) models, such as YouTube and Facebook Watch, provide free content supported by advertisements. Hybrid models combine elements of SVOD and AVOD, offering flexibility to cater to diverse audience preferences.
Content acquisition strategies are also discussed, highlighting the dual approach of purchasing broadcasting rights for existing films and TV shows and investing in original content production. This section underscores the importance of a robust content library in attracting and retaining subscribers.The presentation addresses the challenges faced by OTT platforms, including the unpredictability of content acquisition and audience preferences. It emphasizes the difficulty of balancing content investment with returns in a competitive market, the high costs associated with marketing, and the need for continuous innovation and adaptation to stay relevant.
The impact of OTT platforms on the Bollywood film industry is significant. The competition for viewers has led to a decrease in cinema ticket sales, affecting the revenue of Bollywood films that traditionally rely on theatrical releases. Additionally, OTT platforms now pay less for film rights due to the uncertain success of films in cinemas.
Looking ahead, the future of OTT in India appears promising. The market is expected to grow by 20% annually, reaching a value of ₹1200 billion by the end of the decade. The increasing availability of affordable smartphones and internet access will drive this growth, making OTT platforms a primary source of entertainment for many viewers.
2024-6-01-IMPACTSilver-Corp-Presentation.pdf
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Best Forex Brokers Comparison in INDIA 2024
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
Best practices for project execution and delivery
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
Creative Web Design Company in Singapore
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Part 2 Deep Dive: Navigating the 2024 Slowdown
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSAuthentically Social by Corey Perlman - EO Puerto Rico
Authentically Social by Corey Perlman - EO Puerto RicoCorey Perlman, Social Media Speaker and Consultant
Social media for business Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
Business storytelling: key ingredients to a story
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
CALL 8867766396 SATTA MATKA | DPBOSS | KALYAN MAIN BAZAR | FAST MATKA | DPBOSS GUESSING | TARA MATKA | KALYAN CHART | MATKA BOSS
Organizational Change Leadership Agile Tour Geneve 2024
Organizational Change Leadership at Agile Tour Geneve 2024
Building Your Employer Brand with Social Media
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
Recently uploaded (20)
LA HUG - Video Testimonials with Chynna Morgan - June 2024
LA HUG - Video Testimonials with Chynna Morgan - June 2024
The Evolution and Impact of OTT Platforms: A Deep Dive into the Future of Ent...
The Evolution and Impact of OTT Platforms: A Deep Dive into the Future of Ent...
The Influence of Marketing Strategy and Market Competition on Business Perfor...
The Influence of Marketing Strategy and Market Competition on Business Perfor...
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Authentically Social by Corey Perlman - EO Puerto Rico
Authentically Social by Corey Perlman - EO Puerto Rico
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s Dholera
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s Dholera
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
Organizational Change Leadership Agile Tour Geneve 2024
Organizational Change Leadership Agile Tour Geneve 2024
Plastifloor system with membrane hard topcoat (gb)
- 1. Plastifloor® the floor coating system for the food industry (dry areas) Easy to install, 2h after installation You can drive on it! 2nd Sealer 1st Sealer Coating Membrane Primer Plastifloor® 522 Plastifloor® 522 Plastifloor® 418 Plastifloor® 332 Plastifloor® 112 0,4 kg/m² 0,4 kg/m² 1,2 kg/m²; 1:1 with s/l filler* 1,2 kg/m²; 1:1 with s/l filler* 0,5 kg/m² Broadcast to excess slight broadcast slight broadcast Color quartz natural quartz natural quartz 0,4 - 0,8 mm 0,6 – 1,2 mm 0,6 – 1,2 mm (*) by Volume