Sparkler UK brochure U.K.Office: Palmcroy House 387,London Road, Croydon Surrey, CRO 3PB. Phone: (+44) 020 8689 0863 Fax : (+44) 020 8689 6016 E-mail: info@sparkler-filters.co.uk Brochure valid up to ~2009 In reality this was a cartridge from Parker

1. RESIN BONDED SERIES
Sparkler ProBondTM
cartridges have an unique
proprietary two stage filtration design to maximize
particle removal and service life in viscous fluid filtration
applications. An outer, spiral, prefilter wrap increases
cartridge strength and eliminates residual debris
associated with conventional, machined, resin bonded
cartridges.
ProBond filter cartridges are available in seven
differentiated removal ratings from 2um, 5um, 10um,
25um, 50um, 75um, 125um and 150um pore sizes to
meet a wide range of performance requirements
APPLICATIONS
■ Paints ■ Petroleum Products
■ Printing Inks ■ Process Water
■ Adhesives ■ Oilfield Fluids
■ Resins ■ Animal Oils
■ Emulsions ■ Waxes
■ Chemical Coatings ■ Plasticizers
■ Organic Solvents
■ Outer, spiral wrap collects large particles
and agglomerates, while inner layers
control particle removal at rated size.
■ Outer wrap increases surface area and
eliminate loose debris and contamination
caused by machine products
■ Extra-long acrylic fibres provide added
strength, resist breakage and migration
common with competitive “short fibre”
cartridges.
■ Phenolic resin impregnation strengthens
cartridge for use with fluid viscosities up to
15,000 SSU (3200 cks)
■ Withstands pressure surges up to 150 psid
across cartridge (depending on fluid
temperature)
■ One piece construction eliminates bypass
concerns with multilength cartridges and eases
change out.
■ Silicone-free construction ensures no
contamination to adversely affect adhesion
properties of coatings
U.K.Office: Palmcroy House
387,London Road, Croydon
Surrey, CRO 3PB.
Phone: (+44) 020 8689 0863
Fax : (+44) 020 8689 6016
E-mail: info@sparkler-filters.co.uk

2. RESIN BONDED SERIES
SPECIFICATIONS
Materials of Construction : Recommended Operating Conditions :
Acrylic, long staple fibre Maximum Flow Rate:
phenolic bonding resin. 5 gpm per 10 inch increment
(18.9 Ipm per 254mm increment)
Type of Construction :
Maximum Temperature :
Coreless, one-piece, rigid resin 250o
F (121o
C)
bonded fibrous matrix.
Change Out ▲P: 50 psid (3.5 bar)
Particle Removal Ratings :
Cartridge Pressure Resistance :
2um, 5um, 10um, 25um, 50um, 150 psid (10 bar) @ 70o
F (21o
C)
75um, 125um and 150um 125 psid (8.6 bar) @ 100o
F (38o
C)
90 psid (6.2 bar) @ 150o
F (65o
C)
Dimensions, in (mm) : 65 psid (4.5 bar) @ 180o
F (82o
C)
25 psid (1.7 bar) @ 250o
F (121o
C)
Outside Diameter : 2.56 (65)
Inside Diameter : 1.12 (28.6)
Lengths : 9.75 (247), 10 (254),
19.5 (495), 20 (508), 29.25 (743),
30 (762), 39 (991) and 40 (1016)
ORDERING INFORMATION
PRO 5 29 XA N
Cartridge
Code
Micron Rating Length End cap options Seal Options
PRO 2
5
10
25
50
75
125
150
Code
9
10
19
20
29
30
39
40
In
9-¾
10
19-½
20
29¼
30
39
40
mm
247
254
495
508
743
762
991
1016
Omit = Standard DOE
(coreless)
XA = Poly Extender
TC = Single Open End
222-0-Ring/Flat cap
Omit = DOE or XA
N = Buna N 0-Ring
E = EPR 0-Ring
S = Silicone 0-Ring
V = Viton 0-Ring