This document provides information on Burndy's WEJTAPTM cable connection system for electric utility distribution and transmission applications. It describes the key components of the system, which includes WEJTAPTM connectors, installation tools, and power boosters. The WEJTAPTM connectors use an aluminum wedge that is driven between cables by an installation tool to securely connect them. The system is designed for safety, reliability, and ease of installation.
Catalog cs switch disconnectors_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Catalog cs switch disconnector_fuse_units_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Elastimold - HV High Voltage Joints, Terminations, Loadbreak & Deadbreak Connectors.
Load Break Elbows
A load break elbow when used with a hot stick can be connected or disconnected at high voltage under load, but can only be used with up to a 250kcmil cable. At 100% insulation level, a 250kcmil is good for 345A in underground duct, so you would be de-rating your system by using a 200A elbow with a 250kcmil cable, but they are still widely used due to the flexibility given to the high voltage distribution system at the equipment. Think about it…if you had a critical application where power disruptions were extremely costly and maintenance was required on up-stream equipment in, let’s say a non critical area, this product would be great. You could disconnect the load without disturbing the critical portions, perform the maintenance and then reconnect it. Just make sure to take safety precautions, making and breaking electrical connections under load is very dangerous. The load break elbow is typically not used in man-holes, because it does not allow expansion like the dead break elbow. The construction of the load break elbow does not allow it to be connected to other elbows, but the dead break does.
Dead Break Elbows
A dead break or “hammerhead” elbow can only be disconnected when not under load, this is because you need to actually unscrew a pin to detach it. It would be pretty tough to unscrew the pin with a hot stick and the arc from the disconnected load, if under load, would be pretty substantial. A dead break elbow allows an increased current rating (up to 600A) and can be used on basically all cable types. At 100% insulation level a 750kcmil cable is rated 610A in underground duct. When would you use a 750kcmil? In most non-utility cases you would design or install sets of 500kcmil or smaller if you needed more than one 500kcmil could handle. Even from a 1200A breaker, two sets of 500kcmil per phase would be sufficient for distribution (about 1000A), if the load was even that high. Most of the time you set the relays down to the actual load in order to limit the copper used. A dead break when used in man-holes for splicing cables allows the flexibility of connecting more than two cables together as well as future expansion if required. Say another building was added that needed power, you could just connect that building to the existing array of dead break elbows. This also works great when temporary power is needed for construction or even if the circus is in town and they need medium voltage (it happens!). They can pick up power from the man-hole with the dead break elbows or from a piece of equipment with dead break elbows. I’ve heard that ships are now starting to use medium voltage shore power, I wonder what kind of connections they use.
Dienhathe.com miniature circuit breakersDien Ha The
Siemens,
Catalog Thiết Bị Điện Siemens, Catalog Thiết Bị Điện,
Catalog Phụ Kiện Siemens, Catalog Phụ Kiện,
Catalog Siemens, Catalog,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Siemens vui lòng gọi: 0907.764.966
Catalog cs switch disconnectors_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Catalog cs switch disconnector_fuse_units_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Elastimold - HV High Voltage Joints, Terminations, Loadbreak & Deadbreak Connectors.
Load Break Elbows
A load break elbow when used with a hot stick can be connected or disconnected at high voltage under load, but can only be used with up to a 250kcmil cable. At 100% insulation level, a 250kcmil is good for 345A in underground duct, so you would be de-rating your system by using a 200A elbow with a 250kcmil cable, but they are still widely used due to the flexibility given to the high voltage distribution system at the equipment. Think about it…if you had a critical application where power disruptions were extremely costly and maintenance was required on up-stream equipment in, let’s say a non critical area, this product would be great. You could disconnect the load without disturbing the critical portions, perform the maintenance and then reconnect it. Just make sure to take safety precautions, making and breaking electrical connections under load is very dangerous. The load break elbow is typically not used in man-holes, because it does not allow expansion like the dead break elbow. The construction of the load break elbow does not allow it to be connected to other elbows, but the dead break does.
Dead Break Elbows
A dead break or “hammerhead” elbow can only be disconnected when not under load, this is because you need to actually unscrew a pin to detach it. It would be pretty tough to unscrew the pin with a hot stick and the arc from the disconnected load, if under load, would be pretty substantial. A dead break elbow allows an increased current rating (up to 600A) and can be used on basically all cable types. At 100% insulation level a 750kcmil cable is rated 610A in underground duct. When would you use a 750kcmil? In most non-utility cases you would design or install sets of 500kcmil or smaller if you needed more than one 500kcmil could handle. Even from a 1200A breaker, two sets of 500kcmil per phase would be sufficient for distribution (about 1000A), if the load was even that high. Most of the time you set the relays down to the actual load in order to limit the copper used. A dead break when used in man-holes for splicing cables allows the flexibility of connecting more than two cables together as well as future expansion if required. Say another building was added that needed power, you could just connect that building to the existing array of dead break elbows. This also works great when temporary power is needed for construction or even if the circus is in town and they need medium voltage (it happens!). They can pick up power from the man-hole with the dead break elbows or from a piece of equipment with dead break elbows. I’ve heard that ships are now starting to use medium voltage shore power, I wonder what kind of connections they use.
Dienhathe.com miniature circuit breakersDien Ha The
Siemens,
Catalog Thiết Bị Điện Siemens, Catalog Thiết Bị Điện,
Catalog Phụ Kiện Siemens, Catalog Phụ Kiện,
Catalog Siemens, Catalog,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Siemens vui lòng gọi: 0907.764.966
T&D are distributors for ABB Kabeldon High Voltage Cable Joints, Cable Terminations and Screened Separable Connectors for high voltage XLPE cable terminating and jointing 11kV, 24kV and 33kV. ABB HV cable connectors are premolded screened separable connectors for terminating and connecting XLPE insulated single or three core cables with copper or aluminium conductors, 11-24kV-33kV, into high voltage switchgear and transformers.
ABB connectors terminate high voltage cables with copper wire and copper tape screens, with or without aluminium (AWA) or steel wire armour (SWA) inot switchgear and transformers.
Qnergy offers an effective, economical solution uniquely designed to meet the challenges of rural or remote electrification. The thermal powered generators are capable of generating electricity utilizing virtually any combustible fuel such as natural gas, propane, and biogas. All Qnergy generators feature the patented QB Series Stirling Engine, which delivers robust, high-efficiency performance with very low noise and zero maintenance. Being fuel agnostic and insensitive to gas content, the Qnergy Remote Power System can run on gas with variable caloric content.
The Bond Rite Clamp is the only Static Grounding Clamp that provides Operators with a VISUAL Reference that potentially charged equipment is connected to a verified static grounding point.
Manufacturer of all Electric Control Gears for EOT CraneAnand Control
We take this opportunity to introduce ourselves “ANAND SYSTEMS ENGINEERING PVT. LTD.” As leading manufacturer of electrical control gears suitable for different types of EOT cranes in India. We are renowned both for the quality of the products as well as strategy of our after sales services.
Siemens,
Catalog Thiết Bị Điện Siemens, Catalog Thiết Bị Điện,
Catalog Phụ Kiện Siemens, Catalog Phụ Kiện,
Catalog Siemens, Catalog,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Siemens vui lòng gọi: 0907.764.966
The robust mechanical design of the M2CP is evident in its ductile iron gear case, bronze worm gear, and heat-treated alloy steel worm. Add the flexibility of modular control packages, plus an international sales & support network, and the result is an actuator to count on for the long term.
LV-HV Cable Jointers Tools for 1000V, 11kV, 33kV Cable Preparation.
Low voltage cable jointing tools for cable stripping and cable preparation of DNO utility and industrial power cables including waveform, consac, XLPE and PILC. High voltage cable jointing tools enable the cable preparation, stripping, cutting and removal of insulation (XLPE, EPR), semi-conductive screens (bonded and peelable) and outer cable sheaths (PVC, PE, EPR) from single and multi-core 11-33kV cables, including Triplex cable. T&D also stock and distribute Cembre Cable Crimping & Cable Cutting Tools and SEB Cable Pulling and Laying Equipment including cable rollers, cable socks, drum jacks and conduit rods.
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog ACB dòng DW đến từ thương hiệu Fuji Electric.
Sản phẩm dễ dàng lắp đặt, đi kèm với thiết kế thân thiện với người dùng và môi trường.
700 Series Interface E Elastimold Cable Connectors and Bushings connect and terminate HV cables to Interface E bushings on switchgear and transformers. Elastimold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F. Elastimold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables. 700 Series Interface E, Elastimold Bushings * Bushing Voltage Range 33kV-36kV * Bushing Current Rating 800Amps & 1250Amps * Bushing Type 5/8" Bolted Aluminium Insert Elastimold separable elbow connectors are high voltage cable terminations used to connect polymeric (XLPE or EPR insulated) power cables to HV equipment including transformers, switchgear, capacitors and motors. 700 Series Connectors - 750LR Tee Connectors & 775LR Tee Connectors 800-1250Amps 35-630sqmm Slip on cable connectors - quick to install to high voltage switchgear and transformers (oil, air and gas insulated) Touchproof cable terminations - made from conductive EPDM rubber, fully screened HV termination for safety One part cable termination - built-in stress relief, insulation and outer semi-conductive layers Maintenance friendly - readily disconnectable cable connector for high voltage maintenance work Compact cable connectors - space-saving HV cable terminations for SF6 gas insulated switchgear (GIS) EPDM rubber cable connectors - resistant to ozone, corona, chemicals, water and atmospheric pollutants Flexibility - Elastimold cable connectors are disconnectable and re-useable. Re-use of the Elastimold high voltage cable connector permits site re-location of HV electrical equipment without requiring cable re-termination. HV High Voltage Cable Connectors, Specification - Elastimold dead-break separable cable connectors suit all international high voltage bushing interfaces for the termination of HV cable into switchgear, transformers and motors. Elastimold cable connectors terminate high voltage power cables (typically 11kV, 15kV, 24kV, 33kV, 36kV up to 52kV) into SF6 GIS gas insulated switchgear including Schneider, ABB, Areva and Siemens. Elastimold cable connectors meet the requirements of ANSI/IEEE 386 & 404 and CENELEC EN50180 & EN50181 for high voltage "dead-break" cable connection, i..e connectors installed and terminated onto un-energised high voltage power cable. US specification "load-break" cable connectors for high voltage energised cable termination are available. High Voltage Cable Connectors - Elastimold cable connectors (elbow and straight types) are specified to terminate XLPE or EPR insulated high voltage power cables with copper tape or copper wire screens up to 52kV. Elastimold cable connectors are available to suit and terminate lead covered HV cables for hydro-carbon industries (oil, gas, petrochemicals) with ATEX certification for hazardous area Zones 1 and Zones 2.
T&D are distributors for ABB Kabeldon High Voltage Cable Joints, Cable Terminations and Screened Separable Connectors for high voltage XLPE cable terminating and jointing 11kV, 24kV and 33kV. ABB HV cable connectors are premolded screened separable connectors for terminating and connecting XLPE insulated single or three core cables with copper or aluminium conductors, 11-24kV-33kV, into high voltage switchgear and transformers.
ABB connectors terminate high voltage cables with copper wire and copper tape screens, with or without aluminium (AWA) or steel wire armour (SWA) inot switchgear and transformers.
Qnergy offers an effective, economical solution uniquely designed to meet the challenges of rural or remote electrification. The thermal powered generators are capable of generating electricity utilizing virtually any combustible fuel such as natural gas, propane, and biogas. All Qnergy generators feature the patented QB Series Stirling Engine, which delivers robust, high-efficiency performance with very low noise and zero maintenance. Being fuel agnostic and insensitive to gas content, the Qnergy Remote Power System can run on gas with variable caloric content.
The Bond Rite Clamp is the only Static Grounding Clamp that provides Operators with a VISUAL Reference that potentially charged equipment is connected to a verified static grounding point.
Manufacturer of all Electric Control Gears for EOT CraneAnand Control
We take this opportunity to introduce ourselves “ANAND SYSTEMS ENGINEERING PVT. LTD.” As leading manufacturer of electrical control gears suitable for different types of EOT cranes in India. We are renowned both for the quality of the products as well as strategy of our after sales services.
Siemens,
Catalog Thiết Bị Điện Siemens, Catalog Thiết Bị Điện,
Catalog Phụ Kiện Siemens, Catalog Phụ Kiện,
Catalog Siemens, Catalog,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Siemens vui lòng gọi: 0907.764.966
The robust mechanical design of the M2CP is evident in its ductile iron gear case, bronze worm gear, and heat-treated alloy steel worm. Add the flexibility of modular control packages, plus an international sales & support network, and the result is an actuator to count on for the long term.
LV-HV Cable Jointers Tools for 1000V, 11kV, 33kV Cable Preparation.
Low voltage cable jointing tools for cable stripping and cable preparation of DNO utility and industrial power cables including waveform, consac, XLPE and PILC. High voltage cable jointing tools enable the cable preparation, stripping, cutting and removal of insulation (XLPE, EPR), semi-conductive screens (bonded and peelable) and outer cable sheaths (PVC, PE, EPR) from single and multi-core 11-33kV cables, including Triplex cable. T&D also stock and distribute Cembre Cable Crimping & Cable Cutting Tools and SEB Cable Pulling and Laying Equipment including cable rollers, cable socks, drum jacks and conduit rods.
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog ACB dòng DW đến từ thương hiệu Fuji Electric.
Sản phẩm dễ dàng lắp đặt, đi kèm với thiết kế thân thiện với người dùng và môi trường.
700 Series Interface E Elastimold Cable Connectors and Bushings connect and terminate HV cables to Interface E bushings on switchgear and transformers. Elastimold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F. Elastimold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables. 700 Series Interface E, Elastimold Bushings * Bushing Voltage Range 33kV-36kV * Bushing Current Rating 800Amps & 1250Amps * Bushing Type 5/8" Bolted Aluminium Insert Elastimold separable elbow connectors are high voltage cable terminations used to connect polymeric (XLPE or EPR insulated) power cables to HV equipment including transformers, switchgear, capacitors and motors. 700 Series Connectors - 750LR Tee Connectors & 775LR Tee Connectors 800-1250Amps 35-630sqmm Slip on cable connectors - quick to install to high voltage switchgear and transformers (oil, air and gas insulated) Touchproof cable terminations - made from conductive EPDM rubber, fully screened HV termination for safety One part cable termination - built-in stress relief, insulation and outer semi-conductive layers Maintenance friendly - readily disconnectable cable connector for high voltage maintenance work Compact cable connectors - space-saving HV cable terminations for SF6 gas insulated switchgear (GIS) EPDM rubber cable connectors - resistant to ozone, corona, chemicals, water and atmospheric pollutants Flexibility - Elastimold cable connectors are disconnectable and re-useable. Re-use of the Elastimold high voltage cable connector permits site re-location of HV electrical equipment without requiring cable re-termination. HV High Voltage Cable Connectors, Specification - Elastimold dead-break separable cable connectors suit all international high voltage bushing interfaces for the termination of HV cable into switchgear, transformers and motors. Elastimold cable connectors terminate high voltage power cables (typically 11kV, 15kV, 24kV, 33kV, 36kV up to 52kV) into SF6 GIS gas insulated switchgear including Schneider, ABB, Areva and Siemens. Elastimold cable connectors meet the requirements of ANSI/IEEE 386 & 404 and CENELEC EN50180 & EN50181 for high voltage "dead-break" cable connection, i..e connectors installed and terminated onto un-energised high voltage power cable. US specification "load-break" cable connectors for high voltage energised cable termination are available. High Voltage Cable Connectors - Elastimold cable connectors (elbow and straight types) are specified to terminate XLPE or EPR insulated high voltage power cables with copper tape or copper wire screens up to 52kV. Elastimold cable connectors are available to suit and terminate lead covered HV cables for hydro-carbon industries (oil, gas, petrochemicals) with ATEX certification for hazardous area Zones 1 and Zones 2.
Catalog cs switch disconnector_fuse_unitsDien Ha The
Catalog cs switch disconnector_fuse_units
Catalog CS,
Catalog Thiết Bị Điện CS,
Catalog Điện Công Nghiệp CS,
http://dienhathe.com,
Xem thêm các sản phẩm khác của CS tại https://dienhathe.com
Để nhận báo giá sản phẩm CS vui lòng gọi: 0907.764.966
Catalog cs switch disconnector_fuse_units
C&S,
Catalog C&S,
Catalog Thiết Bị Điện C&S,
Catalog Điện Công Nghiệp C&S,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Autonics tại https://dienhathe.com
Để nhận báo giá sản phẩm vui lòng gọi: 0907.764.966
Underground Cable Accessories
Elastimold® offers the industry's most complete package for managing underground cable connections.
Broad Product Range..
Elastimold accessories, available from 5kV to 138kV, connect, ground, splice, terminate and protect underground cable.
Elastimold Innovation
Elastimold’s long, innovative history includes pioneering such products as extended and repair elbows, jacket seal elbows, and shrink-fit joints.
Abb Combiflex Lugs 1.5, Abb Combiflex Lugs 2.5 | AKBAR TRADING EST. JUBAILAKBAR TRADING
Contact sockets, silver plated (set of 100 pcs)
10 A, conductor area 0,25-1,5 mm2
20 A, conductor area 1,5-2,5 mm2
1
1
1MRK 002 136-A
1MRK 002 136-D
50 g
90 g
Contact pins, silver plated (set of 100 pcs)
10 A, conductor area 0,25-1,5 mm2
20 A, conductor area 1,5-2,5 mm2
1
1
1MRK 002 136-G
1MRK 002 136-H
60 g
120 g
Manufacturing, supplying, exporting Single and Double Check Valve Couplings, Ball Valves and Coupler Hoses. These are appreciated for their sturdiness and resistance to corrosion.
trader, distributor, wholesaler and supplier of MCCB, RCBO, ABB Range Front Panel Residual Current Relays, Arc Guard System, Breakers & Switches, Current Measurement System, Low Voltage Power Distribution, Manual Moniter Starter, Lightning & Surge Protection, Protection & Monitoring Relays and many more
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
FIDO Alliance Osaka Seminar: Passkeys at Amazon.pdf
Penetrox Compound & Paste
1. BURNDY®
Products
Wedge
THE WEJTAP™
SYSTEM
FOR ELECTRIC UTILITY
DISTRIBUTION AND
TRANSMISSION
CONNECTIONS
F-1
CABLE JOINTS, CABLE TERMINATIONS, CABLE GLANDS, CABLE CLEATS
FEEDER PILLARS, FUSE LINKS, ARC FLASH, CABLE ROLLERS, CUT-OUTS
11KV 33KV CABLE JOINTS & CABLE TERMINATIONS
FURSE EARTHING
www.cablejoints.co.uk
Thorne and Derrick UK
Tel 0044 191 490 1547 Fax 0044 191 477 5371
Tel 0044 117 977 4647 Fax 0044 117 9775582
2. BURNDY®
Products
Wedge
Introduction..................................................F-3
WEJTAP™ Connection System..................F-4
WEJTAP™ and Test Data ............................F-5
Aluminum Connectors ................................F-6
WEJTAP™ Power Lug ................................F-7
WEJTAP™ Ordering Information ..............F-8
Copper Connectors ....................................F-9
Connector Selection
By Conductor Size........................F-10 - F-14
By Diameter..................................F-15 - F-17
Stirrup Selection........................................F-18
By Conductor Size........................F-19 - F-23
By Diameter ............................................F-24
Large Conductor Connectors........F-25 - F-26
WEJTAP™ Cover
WCCR, WCCB, WCCSY, WCCLY ..........F-27
Installation Tools
WTRB, WTY, WTB, WTHRB, WTHY ......F-28
Installation Tool Accessories
WTOCBR, WTOCY, WTCK......................F-29
Hot Stick Tool WTBGBW ..........................F-30
WEJTAP™ Hotstick Accessories
WHSCWH, WHSPBC..............................F-30
WHS90ADP, WHSWADP,
WCHAWAS, WHSTA, WHSWB ..........F-31
WHSGB, WHHWB ..................................F-32
WEJTAP™ Kits ..........................................F-33
F-2
TABLE OF CONTENTS
3. BURNDY®
Products
Wedge
INTRODUCTION
The BURNDY® WEJTAP™ System com-
ponents are designed to provide the most
reliable connections available, with safer and
easier installations.
The system consists of a WEJTAP™ connec-
tor, WEJTAP™ installation tools and power-
boosters.
The detailed information on power-boosters,
installation tools and accessories follows.
The BURNDY® WEJTAP™ connector uses
an aluminum alloy wedge that is power-driven
between the run and tap cables locking them
into a ‘‘C” shaped aluminum alloy spring-body.
A wiping action takes place during installation
between the conductors and Wedge which
provides additional cleaning of surface oxides
to supplement wire brushing. In addition, the
contact grooves are lined with a patented
PENETROX™ oxide inhibiting compound to
enhance superior contact surface integrity.
The Wedge is automatically locked onto the
spring-body by a skiving action produced by a
lance located at the forward end of the instal-
lation tool.
During the life of the connection, the spring-
body continues to maintain pressure to
ensure a reliable connection.
THE WEJTAP™
CONNECTOR
■ Tested to NEMA and CSA Class A heat
cycle requirements to ensure long term
reliability.
■ Accommodates a full range of run and tap
conductors from #8 to 1590 ACSR in all
commonly used conductors to meet the
needs of electrical distribution systems.
■ Color-coded connector, boosters, and
tools to assist the installer to make the
correct selection.
■ “Run locator” chamfer is machined into
the Wedge at the end of the “large” groove
to provide positive visual or/and hand
contact identification of the large run
groove for correct installation.
■ Removable design allows tap removal
with minimum conductor damage.
■ Tool embosses BURNDY® identifier on
end of Wedge to provide system identifi-
cation.
Ask about our unique WEJTAP™ Tool
System and Power-Booster which provides
safer and easier installations.
F-3
4. BURNDY®
Products
Wedge
BURNDY WEJTAP™
CONNECTION SYSTEM
BURNDY®, a leading manufacturer of quality
electrical connectors for over 70 years, intro-
duces the WEJTAP™ SYSTEM, a system
that adds further dimension to the existing
BURNDY® group of proven, reliable connec-
tion systems.
WEJTAP™ COMPONENTS are designed to
provide a reliable system connection. The
system consists of WEJTAP™ connectors,
installation tools (including a variety of hotline
and lineman accessories) and a unique
power-booster.
WEJTAP™ CONNECTORS use an alu-
minum alloy wedge that is power-driven
between the run and the tap cables locking
them into a “C” shaped tempered aluminum
alloy spring-body. The spring-body maintains
consistent pressure throughout the life of the
connection to ensure reliability during severe
electrical and climatic conditions. The
wedge’s wiping action combined with factory
installed PENETROX™ PENA 13 provides
superior contact integrity. The wedge is auto-
matically locked onto the spring-body by a
skiving action produced by a lance at the for-
ward end of the WEJTAP™ installation tool.
THE WEJTAP™TOOL is a one-piece assem-
bly that consists of a head and power unit.
Two color-coded interchangeable heads
accept all WEJTAP™ connectors and STIR-
RUP™. The design of the tool recognizes the
need for simplicity and speed of operation as
well as outstanding safety features such as
automatic gas release vented away from the
operator, fast simple breech loading and fast
advance when engaging the connector
assembly. No loose parts to drop or misplace
and a booster ejection system that provides
further safety to the operator. Fewer simplified
hotline devices and handy lineman acces-
sories complete an outstanding tool package.
THE WEJTAP™ POWER-BOOSTER
Patented is a self-contained device that
provides the force necessary to drive the
wedge into direct contact with the conductors.
The booster is activated only when properly
positioned in the tool assembly. A power cell
in the booster is recessed to guard against
premature discharge. The tool/booster
system is designed to activate and deactivate
the booster automatically should the operator
decide to remove the tool from a connector
prior to completing the installation. The deac-
tivated booster may be safely removed from
the tool.
F-4
Features and Benefits
• Large conductor chamfer on ends
of wedge.
Instant hand or visual identification of
large run grooves. Ensures correct
wedge orientation.
• Color-coded WEJTAP™ connector
and booster packaged together.
Easy selection by installer.
• Factory coated grooves with
PENETROX™ PENA 13.
Maintains low contact resistance,
assists in protection against climatic
conditions and is compatible with
common insulations.
• One-piece tool.
No project delays due to dropped or
lost parts.
• Fewer and improved hotstick accessories
Simplifies hotline installation and
saves time.
• Contained booster ejection system.
Safe for operator guards against the
booster being ejected in direction of
the installer.
• Automatic gas release vented away
from operator.
Eliminates manual gas venting and
improves safety.
• Simplified loading.
Speeds installation––no threads––just
depress safety bar, twist and pull
open––load––push and twist to close
prior to applying connector.
• Acme-type threads.
Provides smooth, fast engagement of
tool and connector-saves installer’s time.
5. BURNDY®
Products
Wedge
WEJTAP™ AND
TEST DATA
WEJTAP™ connectors have been subjected
to extensive tests simulating the most severe
service and weather conditions. In addition,
the WEJTAP™ system meets or exceeds the
industry standards of ANSI C119.4 Class 3,
NEMA CC3 1973 Class A 500 Heat Cycles.
As with all BURNDY® connectors, the WEJ-
TAP™ has been designed to operate cooler
than the attached conductors. The WEJ-
TAP™ connectors have also been subjected
to the ASTM B117-73 Salt Spray Test. The
results are shown to the right.
F-5
WEJTAP™
Spring-bodies are color-coded and the
wedges are marked with nominal conductor
run and tap ranges. WEJTAP™ connector
packages are labeled with a variety of com-
mon conductors with their nominal ranges.
■ WEJTAP™ connector wedges are marked
with nominal ACSR, Aluminum and Copper
concentric standard conductors.
■ Red WEJTAP™ connector range Run 8-1/0
Tap 8-2
■ Blue WEJTAP™ connector range Run
2-300 Tap 6-300
■ Yellow WEJTAP™ connector range Run
266.8-1590 Tap 6-1590
All WEJTAP™ wedges contain a clearly
defined chamfer on the large end of the run
conductor groove to identify the “large run”
groove. Installers will appreciate the conve-
nience of visual or hand identification for
correct wedge positioning.
WEJTAP™ wedges are driven between the
run and tap conductors and activate the
spring characteristics of the “C” shaped body.
This action maintains contact pressure even
when the connection is subjected to severe
climatic and electrical conditions.
ANSI C119.4 - 1986 Heat Cycle Test
Average Temperature Rise vs. Current Cycles
TemperatureRise(Deg.C.)
RelativeResistance(Percent)
Hours
Detailed test report packages are available upon request.
ASTM Salt Spray Test
Average % Relative Resistance vs. Hours of Salt Spray Exposure
RUS Accepted
6. BURNDY®
Products
Wedge
ALUMINUM
WEJTAP™
CONNECTORS
The WEJTAP™ CONNECTOR SYSTEM
provides TAPS, STIRRUPS and COVERS,
conductor ranges #8 through 1590. Tap stir-
rup conductor ranges #6 - 1033.6.
F-6
TAPS WEJTAP™ connector ranges are
divided into three color-coded groups.
RUN TAP
RED 8-1/0 8-2
BLUE 2-300 6-300
YELLOW 266.8-1590 6-1590
STIRRUPS™ are available from #6 through
1033.6 nominal conductor ranges. Tinned
copper bails are permanently attached in
sizes 2, 1/0, 2/0, 4/0 to provide a rugged “Hot
Tap” connection point.
COVERS are installed on WEJTAP™ con-
nectors to prevent them from coming in
contact with other taps or exposed ground
points. The WEJTAP™ covers are rugged
snap-on devices available in four sizes to
cover all connector sizes, and are cold
weather tested for easy installations.
SAFETY FEATURES
■ Contained booster ejection system that
guards against potential hazard of spent
boosters being ejected at installers.
■ Automatic gas release vented away from
the operator eliminates manual venting
toward the operator.
■ Power-boosters can only be activated
when properly positioned in the tool and
engaged on the connector. Power-
boosters are automatically deactivated
should the operator decide to remove the
tool from the connector prior to complet-
ing the installation.The deactivated boost-
er may be safely removed, all to provide a
safer tool for your line personnel.
7. BURNDY®
Products
Wedge
WEJTAP™
POWER LUG
WEJTAP™ POWERLUG™ terminals are
made of cast aluminum alloy for termination
of ACSR and Aluminum conductors.
F-7
Fig. 1 Fig. 2 Fig. 3
2 HOLE POWER LUG 4 HOLE POWER LUG 4 HOLE FLAG
MULTIPLE CONDUCTOR TAP APPLICATION
* Electrically, the three smaller conductors are the
likely taps, however, during installation, they are
located in the larger run groove due to their larger
aggregate sum.
NOTE: The recommended connector and booster are ordered
separately. Catalog number is for the POWERLUG™ only.
TAP GROOVE
FOR CONNECTOR CATALOG STANDARD CONDUCTOR HOLES DIMENSIONS
SELECTION NUMBER ACSR ASC/AAC FIGURE IN PAD C D N T
4/0 WCAB30R-2N 1 2 1-1/4 3 5/8 0.34
STANDARD WCAB30R-4N 6 Str. - 266.8 6 Str. - 300 2 4 3 3 5/8 0.30
ACSR WCBB30R-4N 3 4 1-3/4 3-1/2 7/8 0.30
336.4 WCAY39R-2N 1 2 1-1/4 3 5/8 0.34
STANDARD WCAY39R-4N 266.8 - 556.5 336.4 - 636 2 4 3 3 5/8 0.30
ACSR WCBY39R-4N 3 4 3-3/4 3-1/2 1 0.30
795 WCAY49R-2N 1 2 1-3/4 3-1/2 5/8 0.69
STANDARD WCAY49R-4N 605 - 1033.5 715.5 - 1113 2 4 3-1/2 3-1/2 5/8 0.69
ACSR WCBY49R-4N 3 4 4 4 3/4 0.69
CONNECTOR *RUN GROOVE *TAP GROOVE
WCY 64 PB Three - 1/0 ACSR (6/1) Diameter = 0.398Љ One - 4/0 ACSR (6/1) Diameter = 0.563Љ
WCY 65 PB Three - 1/0 ACSR (6/1) Diameter = 0.398Љ One - 3/0 ACSR (6/1) Diameter = 0.502Љ
WCY 63 PB Three - 2/0 ACSR (6/1) Diameter = 0.447Љ One - 4/0 ACSR (6/1) Diameter = 0.563Љ
WCB 11 PB Three - #4 stranded Diameter = 0.232Љ One - 1/0 ACSR (6/1) Diameter = 0.398Љ
WCY 54 PB Three - 1/0 stranded Diameter = 0.368Љ One - 4/0 stranded Diameter = 0.522Љ
WCY 53 PB Three - 1/0 stranded Diameter = 0.368Љ One - 3/0 stranded Diameter = 0.464Љ
WCY 64 PB Three - 2/0 stranded Diameter = 0.414Љ One - 4/0 stranded Diameter = 0.522Љ
WCB 11 PB Three - #4 stranded Diameter = 0.232Љ One - 1/0 stranded Diameter = 0.368Љ
WCB 12 PB Three - #4 stranded Diameter = 0.232Љ One - #4 solid copper hard drawn Diameter = 0.204Љ
8. BURNDY®
Products
Wedge
The BURNDY® WEJTAP™ System has a
wide variety of connectors available for
many different conductor ranges.
The following pages list some common
conductors and the appropriate connector.
ACSR to ACSR page F10
ACSR to AAC page F11
ACSR to Copper page F12
AAC to AAC page F13
AAC to Copper page F14
Stirrup Information pages F18 through F24
ORDERING INFORMATION
■ Power boosters may be ordered
separately in boxes of 25.
Red boosters Cat. #WPBRN Box 25
Blue boosters Cat. #WPBBN Box 25
Yellow boosters Cat. #WPBYN Box 25
For information about conductors which
are not listed, and for further ordering
information, please contact BURNDY® at
1-800-346-4175.
F-8
9. BURNDY®
Products
Wedge
F-9
WEJTAP™
COPPER WEJTAP
WEJTAP™ powder actuated copper connec-
tion system for use in standard grounding
applications Listed under UL467 and over-
head copper-to-copper tap applications
Listed under UL486A.
CATALOG DIMENSIONS COPPER CONDUCTORS ACCOMMODATED INSTALLATION
NUMBER H L W RUN TAP BOOSTER COLOR
WCR33C-1 1.65 1.26 .79 #6 Str./Sol., #4 Str./Sol. #6 Str./Sol. Red
WCR32C-1 [42] [32] [20] #4 Str./Sol., #2 Str./Sol. #6 Str./Sol., #4 Str./Sol. Red
WCB2C2C #2 Str./Sol., #1 Sol. #2 Str./Sol. Blue
WCB25C4C 1/0 Str. #6 Str./Sol., #4 Str./Sol. Blue
WCB25C1C 1/0 Str. #2 Str./Sol., #1 Sol. Blue
WCB25C25 1/0 Str. 1/0 Str. Blue
WCB26C4C 2/0 Str. #6 Str./Sol., #4 Str./Sol. Blue
WCB26C1C 2/0 Str. #2 Str./Sol., #1 Sol. Blue
WCB26C26 2/0 Str. 1/0 Str., 2/0 Str. Blue
WCB27C4C 3/0 Str. #4 Sol. Blue
WCB27C1C 3/0 Str. #2 Str. Blue
WCB27C26 2.40 1.63 1.02 3/0 Str. 1/0 Str., 2/0 Str. Blue
WCB27C27 [61] [41] [26] 3/0 Str. 3/0 Str. Blue
WCB28C4C 4/0 Str. #6 Str./Sol., #4 Str./Sol. Blue
WCB28C1C 4/0 Str. #2 Str./Sol., #1 Sol. Blue
WCB28C26 4/0 Str. 1/0 Str., 2/0 Str. Blue
WCB28C28 4/0 Str. 4/0 Str. Blue
WCB29C1C 250 kcmil #3 Str., #2 Str./Sol., #1 Str./Sol. Blue
WCB29C25 5/8Љ Cu Clad Rod 1/0 Str. Blue
WCB29C26 250 kcmil 1/0 Str., 2/0 Str. Blue
WCB29C28 250 kcmil, 5/8Љ Cu Clad Rod 3/0 Str., 4/0 Str. Blue
WCB29C29 250 kcmil 250 kcmil Blue
2.81 2.00 1.30
WCB30C4C
[71] [51] [33]
300 kcmil #4 Str., #2 Sol. Blue
WCB30C25 300 kcmil 1/0 Str. Blue
WCB30C27 2.64 2.00 1.16 300 kcmil 3/0 Str. Blue
WCB30C29 [67] [51] [29] 300 kcmil 5/8Љ Cu Clad Rod Blue
WCB30C30 300 kcmil 300 kcmil Blue
WCB31C5C 350 kcmil, 3/4Љ Cu Clad Rod #6 Str., #5 Str., #4 Sol. Blue
WCB31C4C 3/4Љ Cu Clad Rod #4 Str. Blue
WCB31C2C
2.81 2.00 1.30
3/4Љ Cu Clad Rod #2 Str. Blue
WCB31C26
[71] [51] [33]
350 kcmil, 3/4Љ Cu Clad Rod 2/0 Str. Blue
WCB31C28 350 kcmil, 3/4Љ Cu Clad Rod 4/0 Str. Blue
WCB31C31 350 kcmil 350 kcmil Blue
WCB33C30
— — —
400 kcmil, 450 kcmil 250 kcmil, 300 kcmil Blue
WCB34C2C 500 kcmil #2 Str. Blue
WCB34C26
2.81 2.00 1.30
500 kcmil 2/0 Str. Blue
WCB34C28
[71] [51] [33]
500 kcmil 4/0 Str. Blue
WCB34C29 — — — 500 kcmil 250 kcmil, 5/8Љ Cu Clad Rod Blue
WCY34C34 3.65 3.00 1.45 500 kcmil 500 kcmil Yellow
WCY36C36 [93] [76] [37] 600 kcmil 500 kcmil, 600 kcmil Yellow
10. BURNDY®
Products
Wedge
F-10
BURNDY WEJTAP™
CONNECTOR
SELECTOR CHART
By Conductor Size
• When ordering, add WC and color code
before number
• Further information may be obtained by
contacting BURNDY® at 1-800-346-4175
34 37 37 36 35
33 33 32 12 12 12 15 21 40 59 59 70 85 02 02
32 31 13 13 13 16 22 41 58 58 69 84 01 01
10 10 10 11 11 23 42 57 57 67 83 00 00
10 11 11 17 24 43 66 66 65 81 99 98
11 17 18 25 44 65 65 64 81 98 97
18 19 26 45 64 64 63 79 97 96
20 27 46 64 64 63 79 96 95
28 47 63 63 62 78 96 95
47 62 62 61 77 95 94
62 61 61 76 94 93
61 61 75 93 92
ACSR TO ACSR 60 74 92 91
72 89 88
87 87
86
TAP
ACSR#8-6/1
ACSR#6-6/1
ACSR#4-6/1
ACSR#2-6/1
ACSR-1/0-6/1
ACSR-2/0-6/1
ACSR-3/0-6/1
ACSR-4/0-6/1
ACSR-266.8-18/1
ACSR-336.4-18/1
ACSR-397.5-18/1
ACSR-477.0-18/1
ACSR-556.5-18/1
ACSR-795.0-36/1
ACSR-954.0-36/1
ACSR-1033.5-36/1
ACSR#8-6/1
ACSR#6-6/1
ACSR#4-6/1
ACSR#2-6/1
ACSR-1/0-6/1
ACSR-2/0-6/1
ACSR-3/0-6/1
ACSR-4/0-6/1
ACSR-266.8-18/1
ACSR-336.4-18/1
ACSR-397.5-18/1
ACSR-477.0-18/1
ACSR-556.5-18/1
ACSR-795.0-36/1
ACSR-954.0-36/1
ACSR-1033.5-36/1
RUN
COLOR NUMBER CODE CONNECTOR
BLUE 10-28 B WCB20
BLUE 40-47 B WCB40
RED 29-37 R WCR30
YELLOW 48-99 Y WCY99
YELLOW 00-39 Y WCY100
(100-139) IF YELLOW, INSERT 1 BEFORE 00-39
11. BURNDY®
Products
Wedge
F-11
BURNDY WEJTAP™
CONNECTOR
SELECTOR CHART
By Conductor Size
TAP
34 37 37 36 35
33 33 32 12 12 12 15 21 40 59 59 70 85 02 02
32 31 13 13 13 16 22 41 58 58 69 84 01 01
30 10 10 11 11 23 42 57 57 68 83 00 00
10 11 11 17 24 43 67 67 66 82 00 99
11 17 18 25 44 66 66 65 81 98 98
18 19 26 45 65 65 64 80 98 97
20 27 46 64 64 63 79 97 96
28 46 63 63 62 78 96 95
47 62 62 62 77 95 94
62 62 61 77 94 93
61 61 76 93 92
ACSR TO AAC 60 75 92 92
72 89 88
88 87
86
ACSR#8-6/1
ACSR#6-6/1
ACSR#4-6/1
ACSR#2-6/1
ACSR-1/0-6/1
ACSR-2/0-6/1
ACSR-3/0-6/1
ACSR-4/0-6/1
ACSR-266.8-18/1
ACSR-336.4-18/1
ACSR-397.5-18/1
ACSR-477.0-18/1
ACSR-556.5-18/1
ACSR-795.0-36/1
ACSR-954.0-36/1
ACSR-1033.5-36/1
AAC #8
AAC #6
AAC #4
AAC #2
AAC-1/0
AAC-2/0
AAC-3/0
AAC-4/0
AAC-266.8
AAC-336.4
AAC-397.5
AAC-477.0
AAC-556.5
AAC-795.0
AAC-954.0
AAC-1033.5
RUN
• When ordering, add WC and color code
before number
• Further information may be obtained by
contacting BURNDY® at 1-800-346-4175
COLOR NUMBER CODE CONNECTOR
BLUE 10-28 B WCB20
BLUE 40-47 B WCB40
RED 29-37 R WCR30
YELLOW 48-99 Y WCY99
YELLOW 00-39 Y WCY100
(100-139) IF YELLOW, INSERT 1 BEFORE 00-39
12. BURNDY®
Products
Wedge
F-12
BURNDY WEJTAP™
CONNECTOR
SELECTOR CHART
By Conductor Size
TAP
COPPER #8
COPPER #6
COPPER #4
COPPER #2
COPPER-1/0
COPPER-2/0
COPPER-3/0
COPPER-4/0
COPPER-250.0
COPPER-350.0
COPPER-500.0
COPPER-750.0
COPPER-1000.0
34 37 37 36 35
33 33 32 12 12 12 15 21 40 59 59 70 85 02 02
32 31 13 13 13 16 22 41 58 58 69 84 01 01
30 10 10 11 11 23 42 57 57 68 83 00 00
10 11 11 17 24 43 67 67 66 82 00 99
11 17 18 25 44 66 66 65 81 98 98
18 19 26 45 65 65 64 80 98 97
20 27 46 64 64 63 79 97 96
27 46 63 62 62 78 96 95
47 62 62 61 77 95 94
62 61 61 75 93 92
76 75 72 90 89
ACSR TO COPPER 92 89 87 87
RUN
ACSR#8-6/1
ACSR#6-6/1
ACSR#4-6/1
ACSR#2-6/1
ACSR-1/0-6/1
ACSR-2/0-6/1
ACSR-3/0-6/1
ACSR-4/0-6/1
ACSR-266.8-18/1
ACSR-336.4-18/1
ACSR-397.5-18/1
ACSR-477.0-18/1
ACSR-556.5-18/1
ACSR-795.0-36/1
ACSR-954.0-36/1
ACSR-1033.5-36/1
• When ordering, add WC and color code
before number
• Further information may be obtained by
contacting BURNDY® at 1-800-346-4175
COLOR NUMBER CODE CONNECTOR
BLUE 10-28 B WCB20
BLUE 40-47 B WCB40
RED 29-37 R WCR30
YELLOW 48-99 Y WCY99
YELLOW 00-39 Y WCY100
(100-139) IF YELLOW, INSERT 1 BEFORE 00-39
13. BURNDY®
Products
Wedge
F-13
BURNDY WEJTAP™
CONNECTOR
SELECTOR CHART
By Conductor Size
TAP
34 37 37 36 35
33 33 32 12 12 12 15 21 40 48 59 59 85 02 02
32 31 13 13 13 16 22 41 49 58 58 84 01 01
30 29 10 14 11 23 42 50 57 57 83 00 00
10 14 11 17 24 43 51 67 66 82 99 00
11 17 18 25 44 52 66 65 81 98 98
18 19 26 45 53 65 64 80 98 97
20 27 46 54 64 63 79 97 96
28 46 55 63 62 78 96 95
47 56 62 62 77 95 94
56 62 61 77 94 93
62 61 76 93 92
AAC TO AAC 60 75 92 92
72 89 88
88 87
86
AAC #8
AAC #6
AAC #4
AAC #2
AAC-1/0
AAC-2/0
AAC-3/0
AAC-4/0
AAC-266.8
AAC-336.4
AAC-397.5
AAC-477.0
AAC-556.5
AAC-795.0
AAC-954.0
AAC-1033.5
AAC-#8
AAC-#6
AAC-#4
AAC-#2
AAC-1/0
AAC-2/0
AAC-3/0
AAC-4/0
AAC-266.8
AAC-336.4
AAC-397.5
AAC-477.0
AAC-556.5
AAC-795.0
AAC.954.0
AAC-1033.5
RUN
• When ordering, add WC and color code
before number
• Further information may be obtained by
contacting BURNDY® at 1-800-346-4175
COLOR NUMBER CODE CONNECTOR
BLUE 10-28 B WCB20
BLUE 40-47 B WCB40
RED 29-37 R WCR30
YELLOW 48-99 Y WCY99
YELLOW 00-39 Y WCY100
(100-139) IF YELLOW, INSERT 1 BEFORE 00-39
14. BURNDY®
Products
Wedge
F-14
BURNDY WEJTAP™
CONNECTOR
SELECTOR CHART
By Conductor Size
TAP
COPPER #8
COPPER #6
COPPER #4
COPPER #2
COPPER-1/0
COPPER-2/0
COPPER-3/0
COPPER-4/0
COPPER-250.0
COPPER-350.0
COPPER-500.0
COPPER-750.0
COPPER-1000.0
34 37 37 36 35
33 33 32 12 12 12 15 21 40 48 59 59 85 02 02
32 31 13 13 13 16 22 41 49 58 58 84 01 01
30 29 10 14 11 23 42 50 57 57 83 00 00
10 14 11 17 24 43 51 67 66 82 99 00
11 17 18 25 44 52 66 65 81 98 98
18 19 26 45 53 65 64 80 98 97
20 27 46 54 64 63 79 97 96
27 46 55 63 62 78 96 95
47 56 62 61 77 95 94
62 61 61 75 93 92
76 75 72 90 89
AAC TO COPPER 92 89 88 87
AAC-#8
AAC-#6
AAC-#4
AAC-#2
AAC-1/0
AAC-2/0
AAC-3/0
AAC-4/0
AAC-266.8
AAC-336.4
AAC-397.5
AAC-477.0
AAC-556.5
AAC-795.0
AAC.954.0
AAC-1033.5
RUN
• When ordering, add WC and color code
before number
• Further information may be obtained by
contacting BURNDY® at 1-800-346-4175
COLOR NUMBER CODE CONNECTOR
BLUE 10-28 B WCB20
BLUE 40-47 B WCB40
RED 29-37 R WCR30
YELLOW 48-99 Y WCY99
YELLOW 00-39 Y WCY100
(100-139) IF YELLOW, INSERT 1 BEFORE 00-39
27. BURNDY®
Products
Wedge
F-27
WEJTAP™ COVER
WEJTAP™ Covers are installed on
WEJTAP™ connectors to prevent them from
coming in contact with other taps or exposed
ground points. The covers are rugged snap-
on devices available in four sizes to cover all
connector sizes.
COVER WEJTAP NOMINAL CONDUCTOR RANGE COVER
CATALOG NO. SIZE RUN TAP COLOR
Small Old
WCCR
Style Red
8 - 1/0 8 - 2
Black
WCCB Red & Blue 2 - 300 6 - 300 Weather
WCCSY Small (Yellow) 300 - 556.5 6 - 556.5 Rated
WCCLY Large (Yellow) 556.5 - 1033.5 556.5 - 1033.5
28. BURNDY®
Products
Wedge
F-28
WEJTAP™
INSTALLATION
TOOLS
Patented
Type WTRB
WEJTAP™ tool assembly with small head for
small and medium range taps - #8 through
350 kcmil and stirrups.
Type WTY
WEJTAP™ tool assembly with large head for
medium and large range taps - 336.4 through
1590 kcmil ACSR, and stirrups.
Type WTB
WEJTAP™ tool body one-piece assembly
basic drive mechanism used to install WEJ-
TAP™ connectors and STIRRUPs range - #8
awg through 1590 kcmil ACSR.
Type WTHRB1S
WEJTAP™ tool head operating platform for
small and medium range (red/blue coded)
connectors.
Type WTHY1S
WEJTAP™ tool head operating platform for
medium and large range (yellow coded)
connectors.
Type WTBGBW
WEJTAP™ self firing tool body. Used to install
WEJTAP™ connectors and stirrups. Utilizes a
self firing actuator for use with hotsticks.
29. BURNDY®
Products
Wedge
F-29
WEJTAP™
INSTALLATION TOOL
ACCESSORIES
Type WTOCBR
WEJTAP™ removal clip for red type II and
medium (blue coded) tap connectors used
with type WTHRB tool head.
Type WTOCY
WEJTAP™ removal clip for large (yellow
coded) tap connectors used with type WTHY
tool head.
Type WTCK
WEJTAP™ tool cleaning/maintenance kit for
use with type WTB tool body.
30. BURNDY®
Products
Wedge
F-30
WEJTAP™
HOTSTICK TOOL
Type WTBGBW
WEJTAP™ Self firing tool body. Used to
install WEJTAP™ connectors and stirrups.
Similar to Type WTB tool except utilizes a self
firing actuator for use with hotsticks.
WEJTAP™ HOTSTICK
ACCESORIES
Type WHSCWH
WEJTAP™ hotstick connector clamp used to
hold the tap connector spring-body and
wedge for installation on energized lines with
the shotgun hotstick.
Type WHSPBC
WEJTAP™ hotstick dual cable clamp used to
hold run and tap conductors in position dur-
ing hotline installation. Universal for all appli-
cations from #8-1272 ACSR.
31. BURNDY®
Products
Wedge
F-31
WEJTAP™ HOTSTICK
ACCESSORIES
Type WHS90ADP
WEJTAP™ hotstick angle adapter used to
attach tool to universal hotstick for hotline
installation.
Type WHSWHADP
WEJTAP™ hotstick angle wedge holder
adapter attaches wedge clamp to universal
hotstick for hotline installation.
Type WCHAWAS
WEJTAP™ hotstick angle wedge holder
adapter attaches wedge clamp to universal
hotstick for hotline installation with shotgun
stick.
Type WHSTA
WEJTAP™ hotstick tool (actuator) hammer
attaches to the universal hotstick for striking
the tool actuator button to complete the instal-
lation.
Type WHSWB
WEJTAP™ hotstick wirebrush attaches to the
universal hotstick for cleaning the contact sur-
face of the line conductor.
32. BURNDY®
Products
Wedge
F-32
WEJTAP™ HOTSTICK
ACCESSORIES
(Continued)
Type WHSGB
WEJTAP™ hotstick breech drive. Geared
shotgun hotstick adapter easily latches to the
breech end of WEJTAP installation tool with-
out disassembly for use on energized lines.
Type WHHWB
WEJTAP™ hand-held wire brush for cleaning
surface contact areas on non-energized
conductors.
33. BURNDY®
Products
Wedge
F-33
WEJTAP™ KITS
Tools included in Kit (Quantity)
Type WABAG
WEJTAP™ accessories bag is designed for
use in carrying installation tool(s), removal
clips, and cleaning kit. Hotstick accessories
may be accommodated as well. Holders for
power boosters are conveniently located on
the outside of the bag.
WT2B2RBY WT2BRBY WTRBYK WTYK WTRBK WT2BRBYK WT2B2RBYK WTY WTRB WTY WTRB WTBGBW WTRBY
WABAG WABAG WABAG WABAG RBYK WABAG
Power Unit WTB 2 2 1 1 1 2 2 1 1 1 1 1
Self Firing Tool WTBGBW 1
Large Frame WTHY1S 1 1 1 1 1 1 1 1 1
Large T.O. Clip WTOCY 1 1 1 1 1 1 1 1
Small Frame WTHRB-1S 1 1 1 1 1 2 1 1 1 1
Cleaning Kit WTCK 1 1 1 1 1 1 1 1 1 1 1 1 1
Small T.O. Clip WTOCBR 1 1 1 1 1 1 1 1 1
Carrying Case WTCC 1 1 1 1 1
Carrying Case WABAG 1 1 1 1 1
Contact your BURNDY representative for a WEJTAP™ demonstration or contact the factory at
1-800-346-4175
TYPE WTCC
(Carrying Case Only)
WEJTAP™ plastic carrying case. Designed
for rugged use in all weather conditions. It
accommodates WEJTAP™ installation tool,
removal clips, and cleaning kit.
CABLE JOINTS, CABLE TERMINATIONS, CABLE GLANDS, CABLE CLEATS
FEEDER PILLARS, FUSE LINKS, ARC FLASH, CABLE ROLLERS, CUT-OUTS
11KV 33KV CABLE JOINTS & CABLE TERMINATIONS
FURSE EARTHING
www.cablejoints.co.uk
Thorne and Derrick UK
Tel 0044 191 490 1547 Fax 0044 191 477 5371
Tel 0044 117 977 4647 Fax 0044 117 9775582