Thorne & Derrick International, profile picture
Uploaded byThorne & Derrick International
38,994 views

Alroc Tools - Cable Stripping & Preparation Tools For LV HV Cable Jointers

The document is a catalog from ALROC describing their products for high voltage cable preparation. It includes tools for removing the outer jacket, restoring the shape of the semi-conductor screen, and preparing the insulation. The catalog provides information on each tool's functions, specifications, and pictures. It aims to help technicians and teams working on power systems to safely prepare cables for installation and maintenance.

Embed presentation

Downloaded 88 times
HIGH VOLTAGE CATALOG July 2012 ALROC Z.I. de la Fonderie 72160 Tuffé FRANCE Tel. : +33 (0)2 43 71 11 80 Fax : +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Tel: +44 (0)191 490 1547 Fax: +44 (0)191 477 5371 Email: northernsales@thorneandderrick.co.uk Website: www.cablejoints.co.uk www.thorneanderrick.co.uk Edition July 2012 – Illustrations non contractual
Edition - July 2012 The SIBILLE INDUSTRIE GROUP ESP division is a manufacturer of electrical safety equipment. Our products are intended for technicians and teams who build, maintain and operate power systems in a high-risk environment (low, medium and high voltage). The goals aspired to by our group since its creation are to:  Protect individuals against electrical risks  Provide products ensuring maximum security  Develop risk prevention among those working within the industry ESP focuses on innovation in order to provide solutions adapted to evolving global technological networks and thereby effectively optimizes power distribution and management. OUR VALUES  Customer satisfaction by providing innovative, quality products  100% of our factories are in France  Employee satisfaction through a respectful and participative management system 2
Edition - July 2012 Established in 1940, ALROC has become as of the late 1980’s one of the worldwide leading companies specialized in the fabrication of cable preparation tools and machines to prepare: - Electrical cables (low, medium and high voltage) - Optic fiber and telecommunication cables - Coaxial and special cables Fondée en 1940, la société ALROC, a su se positionner comme le leader mondial depuis la fin des années 1980 dans la fabrication des outils et machines pour la préparation des câbles : - Electriques (basse, moyenne et haute tensions) - Fibres optiques et téléphoniques - Coaxiaux et spéciaux As of December 2007, ALROC is now part of the group SIBILLE INDUSTRIE and has exported its products to more than 50 countries to date. ALROC a rejoint le groupe SIBILLE INDUSTRIE depuis décembre 2007, et a exporté ses produits dans plus de 50 pays à ce jour. ALROC is equipped with the best high-tech machines tools and data processing systems to design and to manufacture its products. La société ALROC s’est dotée des moyens technologiques et informatiques les plus performants pour concevoir (C.A.O., F.A.O. G.P.A.O.), fabriquer ses produits (centres d’usinage et tours à commande numérique, injection plastique). Consequently, ALROC offers customized design to meet specific customer requirements. De cette manière, ALROC apporte des réponses sur mesure aux besoins spécifiques de sa clientèle. Technical Support Support Technique Beyond the technical hotline, ALROC is also equipped with an audiovisual system to offer live visual assistance with our users. Au-delà du support téléphonique, ALROC est aussi dotée d’un système audiovisuel afin d’offrir un support technique en direct auprès de vos collaborateurs. In addition to the above, ALROC also offers training sessions on site with a view on training in the handling of the tools. ALROC est aussi en mesure d’offrir une formation prise en main dans ses locaux. Bureau d’étude Engineering department Fonderie Foundry shop Montage Assembly line Injection plastique Plastic injection Centres d’usinage à commande numérique Machine tool shop Tour à commande numérique Machine tool shop 3
Edition - July 2012 INDEX OUTER JACKET ................................................................................................ 7 Single cut (reinforced & alarmed) for outer jacket - DMSR....................... 9 Jacket spreader - EGA .............................................................................. 11 Lead spreader - EVP EV HTB ................................................................ 12 Cable handler - CAS ................................................................................. 13 Double cut for outer jacket - DM25-60-DC.............................................. 14 Single cut for outer jacket - DM .............................................................. 15 Single cut (alarmed) for outer jacket - DMS ........................................... 16 Semi-conductor remover on outer jacket - AUG5/60-160 ...................... 17 SEMI-CONDUCTOR ..................................................................................... 19 See also multifunctions tools CAMF5, CMF4, CMF5, AML and C/PP LHS ........................................................................................................... 21 Restore cylindrical shape - ASR................................................................ 22 Restore cylindrical shape with superiror finition - ASR/F ........................ 23 INSULATION ................................................................................................... 25 See also multifunctions tools CAMF5, CMF4, CMF5, AML and C/PP LH ............................................................................................................. 27 4
Edition - July 2012 CHANNEL & CONE ON INSULATION.................................................... 29 Cone on insulation NO SILICONE - CHN - NS ........................................... 31 Cone finishing - TC ................................................................................... 32 Channel - LHP ........................................................................................... 33 Channel NO SILICONE - LHP5 NS ............................................................. 34 Choice of blades for LHP tools .................................................... 35 MULTIFUNCTIONS (SEMI-CONDUCTOR + INSULATION) ........................... 39 SUPER FINITION + NO SILICONE - CAMF5/55-160-NS ............................ 41 NO SILICONE - CMF4/60-110-NS CMF5/100-160-NS ........................... 42 K7/FSC (pour MF4/60-110-NS et MF5/100-160-NS) .................. 43 ASI/40-80 ................................................................................................. 44 GRI-RTE .................................................................................................... 45 MOTORIZED MULTIFUNCTIONS (SEMI-CONDUCTOR + INSULATION) 47 AML .......................................................................................................... 49 Blade add-on to remove insulation - K7i/ ................................... 50 Electrical sander - C/PP ........................................................................... 51 CABLE CLAMP................................................................................................ 53 For Ø >50mm, cable clamp for all HTB ALROC tools - BMFD/50-160 .... 54 SAV..................................................................................................................... 55 5
Edition - July 2012 OUTER JACKET p.7 - 17 SEMI-CONDUCTOR SCREEN p.19 – 23 MULTIFUNCTIONS p. 39 - 51 INSULATION p. 25 - 35 MULTIFUNCTIONS p. 39 - 51 6
Edition - July 2012 OUTER JACKET 7
Edition - July 2012 Product range overview AUG5/60-160 DMSR 80-160 DMSR 40-90 DMS 50-95 DMS 95-145 DM 50-95 Semi-conductor on jacket Reinforced jacket removal tool with sound alarm Jacket removal tool with sound alarm DM 95-145 DM 30-60 Basic jacket removal tool DM 25-60-DC Used with Optional EGA / EVP / EV HTB / CAS BMFD 50-160 8
Edition - July 2012 HV – Outer Jacket DMSR  New steel reinforced position indicator for circular & longitudinal cut D M S R  Incorporated detection system rolls on an adhesive aluminium tape Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Edition 02/ 2010 /A0 – Illustrations non contractuelles 9
Edition - July 2012 HV – Outer Jacket DMSR D M S R FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr CHARACTERISTICS The DMSR 40/90 is specially  Removes the outer jacket designed to remove the HDPE outer sheath also lead sheath of  Change of longitudinal to circular every thickness on high voltage cutting without loosing tool from cables. The DMS/R is very solid to the cable. remove heavy outer sheath. A comparator allow a precise  Comparator for a precise cutting cutting of the alu or lead. .sheath. L: 370 mm Weight : 7.7kg l: 155 mm H: 470 mm Dimension Cable diameter Max cutting Réf : Weight capacity depth DMSR/40-90 40 - 90mm 11mm 370 x 155mm 7,7kg DMSR/80-160 80 - 160mm 11mm 400 x 160mm 10,5kg Edition 02/ 2008 /A0 – Illustrations non contractuelles 10
Edition - July 2012 HV – Outer Jacket EGA E G A * FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE CHARACTERISTICS EGA tool allows to spread and to Outer sheath spreading from HV cables. remove the outer sheath from HV cables after realization of Note : for more facility, spread the longitudinal and circular cut. outer sheath using a pair of EGA. L: l: H: Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Edition 02/ 2010 /A2 – Illustrations non contractuelles 11 430 mm 120 mm 40 mm Weight : 1,2 kg
Edition - July 2012 HV – Lead Outer Jacket EVP EV HTB E V FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE EVP and EV-HTB spreaders facilitate the lead spreading in regards to the semi-conductive sheet. CHARACTERISTICS Lead sheath spreading EVP for LV and MV cables EV-HTB for HV cables Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Edition 10/ 2005 /A4 – Illustrations non contractuelles 12
Edition - July 2012 HV – Outer Jacket CAS C A S FUNCTIONS CHARACTERISTICS The key strap CAS can handle HV cables without damaging them.  Handling cables Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Ref : Width of strap Lenght of the handle Weight CAS/1 75 mm 450 mm 3 kg CAS/2 150 mm 600 mm 4.5 kg Edition 02/ 2008 /A0 – Illustrations non contractuelles 13
Edition - July 2012 HV – Outer Jacket DM25-60-DC D M 2560DC FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE The DM25/60 tool is designed to realize a longitudinal cut to remove HDPE outer jackets as well as lead sheath. Application example : Outer sheath control on drum in factory. CHARACTERISTICS  Circular and longitudinal cutting on cable's outer sheath.  Sold in plastic case  Capacity : Ø25 - 60mm  maximum cutting depth: 7mm L: l: H: Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Edition 07/ 2009 /A0 – Illustrations non contractuelles 14 500 mm 300 mm 220 mm Weight: 6.7kg
Edition - July 2012 HV – Outer Jacket DM D M FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 CHARACTERISTICS The DM is designed to remove PEHD or lead o of variable thickness from high voltage cables. Removes outer sheath from high voltage cables Supplied with plastic case Cable diameter Max thickness Ref : Weight 30 - 60 mm 7 mm DM 30-60 4.1 kg 50 - 95 mm 7 mm DM 50-95 4.3 kg 95 - 145 mm 11 mm DM 95-145 5.0 kg www.alroc.fr commercial@alroc.fr Edition 12/ 2008 /A0 – Illustrations non contractuelles 15
Edition - July 2012 HV – Outer Jacket DMS D M S FUNCTIONS CHARACTERISTICS The DMS is designed to remove polyethylene jackets of variable thickness from high voltage cables. Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Removes outer sheath from high voltage cables Audible sound indication when The incorporated sound alarm metallic shield is reached system warns when the blade is in contact with the lead/ aluminium Supplied with plastic case shield. Cable diameter Max thickness Ref : Weight 50 - 95 mm 7 mm DMS 50-95 4 kg 95 - 145 mm 11 mm DMS 95-145 5 kg Edition 01/ 2006 /A4 – Illustrations non contractuelles 16
Edition - July 2012 HV – Outer Jacket AUG5/60-160 A U G 5 / 60160 FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE CHARACTERISTICS The AUG5/60-160 tool can be used for peeling the bonded semi-conductor for cable preparations. Removing outer sheath Minimal peeling thickness: 2mm Capacity: 60 - 160mm Ø L: l: H: Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Edition 02/ 2010 /A3 – Illustrations non contractuelles 17 640 mm Weight : 8.6 kg 226 mm 113 mm
Edition - July 2012 18
Edition - July 2012 SEMI-CONDUCTOR SCREEN 19
Edition - July 2012 Product range overview ASR/F 100-160 ASR/F 70-110 ASR/F 35-75 Restores cylindrical shape with superior finishing ASR/ 100-160 ASR/ 70-110 ASR/ 35-75 Restores cylindrical shape LHS5/ 100-140 LHS2/ 38-60 LHS3/ 60-80 Old generation LHS4/ 80-110 Used with BMFD 50-160 20
Edition - July 2012 HV – BONDED SEMI-CONDUCTOR LHS L H S FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr CHARACTERISTICS LH tools remove Bonded semiconductor leaving a correct finishing on the insulation. Bonded semi-conductor screen removal Semi-conductor diameter Ref : Weight 38 - 60 mm LHS2 2 kg 60 - 80 mm LHS3 3 kg 80 - 110 mm LHS4 4,5 kg 100 - 140 mm LHS5 6,5 kg Edition 10/ 2005 /A3 – Illustrations non contractuelles 21
Edition - July 2012 HV – BONDED SEMI-CONDUCTOR ASR ASR/100-160 A S R ASR/35-75 ASR/70-110 FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr CHARACTERISTICS  Removes the bonded semiconductor screen The ASR tool allows to remove the bonded semi-conductor without damaging the insulation layer, especially suited when the cable is not perfectly cylindrical.  Reshape cable to a cylindrical form on the insulation Diameter on the semi-conductor screen Ref : Weight 35 - 75 mm ASR/35-75 3 kg 70 - 110 mm ASR/70-110 4,6 kg 100 - 160 mm ASR/100-160 9,8 kg Edition 09/ 2006 /A4 – Illustrations non contractuelles 22
Edition - July 2012 HV – BONDED SEMI-CONDUCTOR ASR/F A S R /F ~20mm FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr The ASR tool allows to remove the bonded semi-conductor without damaging the insulation layer, especially suited when the cable is not perfectly cylindrical. In addition to the above, the finition is superior to the ASR tool. α = 10° CHARACTERISTICS  Removes the bonded semi-conductor screen  Reshape cable to a cylindrical form on the insulation  Cone preparation on the bonded semi-conductor  Clean surface finish on the insulation  Important reduction time through reduced sanding on the insulation Diameter on the semi-conductor screen Ref : Weight 35 - 75 mm 70 - 110 mm 100 - 160 mm ASR/F35-75 ASR/F70-110 ASR/F100-160 3,3 kg 4,8 kg 10 kg 23
Edition - July 2012 24
Edition - July 2012 INSULATION 25
Edition - July 2012 Product range overview LH5/ 100-140 LH2/ 38-60 LH3/ 60-80 Old generation LH4/ 80-110 Used with (except C/PP) BMFD 50-160 26
Edition - July 2012 HV – BONDED SEMI-CONDUCTOR LH L H FUNCTIONS LH tools remove insulation from HTB cables. Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr CHARACTERISTICS Insulation removal Cable diameter Ref : Weight 38 - 60 mm LH2 2 kg 60 - 80 mm LH3 3 kg 80 - 110 mm LH4 5,9 kg 100 - 140 mm LH5 8,5 kg Edition 10/ 2005 /A4 – Illustrations non contractuelles 27
Edition - July 2012 28
Edition - July 2012 E CHANNEL & CONES ON INSULATION 29
Edition - July 2012 Product range overview TC (all sizes possible, one TC per cable configuration) CHN-NS-100-160 CHN-NS-50-110 LHP5/50-140-NS Finishing of the cone Cone (NO SILICONE) Channel (NO SILICONE) (used without cable clamp) LHP5/ 100-140 LHP2/ 38-60 Channel (used with cable clamp) LHP4/ 60-110 Used with : (except for TC + LHP5/50-140NS) BMFD 50-160 30
Edition - July 2012 HV - INSULATION CHN - NS C H N NS FUNCTIONS CHARACTERISTICS LHC-NS tools allow to perform a straight cutting or tapers on cable insulation. Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Taper realization on cable insulation Supplied with cable clamp Use of tool without lubrication. Delivered in plastic case Cable diameter Ref : Weight 50 - 110 mm CHN4/60-110-NS 7.6 kg 100 - 160 mm CHN5/100-160-NS 13.3 kg Edition 03/ 2011 /A1 – Illustrations non contractuelles 31
Edition - July 2012 HV - INSULATION TC Cones are customized T C * Lg * Lenght of cone FUNCTIONS ALROC-TC tools taper the insulation Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr CHARACTERISTICS  TC tool is calibrated per cable section  Standard taper length : 30 to 40 mm  Ask for special taper lengths : 65 mm,95 mm,120 mm Tension Conductor section Cone lenght 6 / 10 kV 8.7 / 15 kV 12 / 20 kV 10² - 240² 25² - 630² 25² - 630² 30 - 40mm 18 / 30 kv 36 kv And above 50² - 1300² Consult us 40 – 65 – 95 – 120mm * Sections are given for illustrative purposes for cable tensions of 12 and 20kV Edition 04 / 2012 /A5 – Illustrations non contractuelles 32
Edition - July 2012 HV - INSULATION LHP L H P FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE CHARACTERISTICS The LHP tool allows to Realization of a groove in the insulation. remove a part of the insulation and the semiVarious blades add-ons can be mounted to conductor to make a channel realize any groove or channel shape. or a groove form. Requires a cable clamp to be operated (sold separately). Blades add-ons and blocks are sold separately Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 Cable diameter on insulation Ref : Weight 38 - 60 mm LHP2 2,7 kg www.alroc.fr commercial@alroc.fr 60 - 110 mm LHP4 4,5 kg 100 - 160 mm LHP5 10,5 kg Edition 09/ 2006 /A6 – Illustrations non contractuelles 33
Edition - July 2012 HV - INSULATION LHP5 NS L H P 5 NS FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE CHARACTERISTICS The LHP5/50-140-NS tool allows Realization of a groove in the insulation. to remove a part of the insulation and the semi-conductor to make Unlike the standard LHP tool, the LHP5 a channel or a groove form. NS does not require a cable clamp to be operated. This tool is used without lubrication. Delivered in plastic case. Capacity : Ø50 - 160mm L: 610 mm Weight : 10.1 kg l: 226 mm H: 122 mm Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Blades add-ons are sold separately Edition 04/ 2011 /A0 – Illustrations non contractuelles 34
Edition - July 2012 HV - INSULATION Choix des lames pour LHP L H P L FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE CHARACTERISTICS LHPL add-on blades are fitted on ALROC tools referenced LHP to perform a channel or a groove form on the insulation of HV cables. Realization of a channel on the insulation All groove forms and profiles upon request. Blades add-ons and blocks are sold separately. Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 Tool Tool capacity Reference LHP2 Ø38 - 60 mm LHPL2-… LHP4 Ø60 -110 mm LHPL4-… www.alroc.fr commercial@alroc.fr LHP5 Ø100 - 160 mm LHPL5-… LHP5 NS Ø50 - 140 mm LHPL5 NS -… Edition 09/ 2008 /A1 – Illustrations non contractuelles 35
Edition - July 2012 HV - INSULATION Choix des lames pour LHP 1- Blade for single groove Blade reference For tool : 5 LHP2 B maxi = 21 LHPL2-5 LHP4 B maxi = 30 LHPL4-5 LHP5 B maxi = 35 LHPL5-5 10 LHPL2-10 LHPL4-10 LHPL5-10 15 (14 for LHP2) LHPL2-14 LHPL4-15 LHPL5-15 20 LHPL4-20 LHPL5-20 25 LHPL4-25 Other dimensions upon request LHPL5-25 A (mm) 2- Blade for shouldered groove B C maxi D maxi For tool 2.5 3 11 15 LHP2 LHPL2-SP6 4 4 9.5 15 LHP2 LHPL4-SP6 10 3 13 30 LHP4 LHPL4-SP10 7 4.5 15 13 LHP4 LHPL4-SP11 7 5 15 13 LHP4 LHPL4-SP12 6 4 14.5 16 LHP4 LHPL4-SP14 4 4 20.5 16 LHP4 LHPL5-SP4 6 4 14.5 16 LHP5 4 4 20.5 16 All other dimensions upon request LHP5 LHPL5-SP5 C A D A B Blade reference LHPL2-SP5  The tools must be used when the cable is out of tension by skilled workers who are competent in cable preparation and know about electrical phenomenons.  Wearing anti-cut gloves is obligatory.  Clean the tools after each utilization. ALROC S.A.S – ZI de la Fonderie – 72160 TUFFE – FRANCE – Tél : 02.43.71.11.80 – Fax : 02.43.71.16.51 Internet :www.alroc.fr – Email :commercial@alroc.fr – S.A.S au capital de 800000€ – 341 050 987 RCS LE MANS – SIRET 341 050 987 00013 – APE 2453Z – TVA/FR 77 341 050 987 Edition 09/2008 /A1 – Illustrations non contractuelles Page 2/3 36
Edition - July 2012 HV - INSULATION Choix des lames pour LHP 3- Blade for shouldered groove with chamfer Blade reference LHPL2-SP3 A B C maxi D E For tool : 2.7 3 6.25 7 4 LHP2 LHPL2-SP4 4 3 5.6 5 2 LHP2 LHPL4-SP2 4 4 14.5 10 4 LHP4 LHPL4-SP3 6 4 14.5 10 4 LHP4 LHPL4-SP5 5.25 10 16.75 18.5 3 LHP4 LHPL5-SP2 4 4 14.5 10 4 LHP5 LHPL5-SP3 6 4 14.5 10 4 LHP5 All other dimensions upon request 4- Blade for shouldered groove with radius Blade reference LHPL2-SP1 A B C maxi D E For tool : 2.7 3 8.3 8.75 2.5 LHP2 LHPL4-SP7 8.25 5.5 13.75 13 3 LHP4 LHPL5-SP1 10 5 12 16.1 3 LHP5 Radius of 1.5mm in the back of the groove A except for the blade LHPL2-SP1 with sharp edges All other dimensions upon request We fabricate all types of blades upon request. Please send us a drawing with the desired result  The tools must be used when the cable is out of tension by skilled workers who are competent in cable preparation and know about electrical phenomenons.  Wearing anti-cut gloves is obligatory.  Clean the tools after each utilization. ALROC S.A.S – ZI de la Fonderie – 72160 TUFFE – FRANCE – Tél : 02.43.71.11.80 – Fax : 02.43.71.16.51 Internet :www.alroc.fr – Email :commercial@alroc.fr – S.A.S au capital de 800000€ – 341 050 987 RCS LE MANS – SIRET 341 050 987 00013 – APE 2453Z – TVA/FR 77 341 050 987 Edition 09/2008 /A1 – Illustrations non contractuelles page 3/3 37
Edition - July 2012 38
Edition - July 2012 MULTIFUNCTIONS (SEMI-CONDUCTOR SCREEN + INSULATION) 39
Edition - July 2012 Product range overview Scrappers GRI-RTE CAMF5/55-160 NS CMF5/100-160 NS CMF4/60-110 NS Interchangeable Blade add-on SUPER FINITION + NO SILICONE (Semi-conductor + insulation + chamfer) Interchangeable Blade add-on NO SILICONE (Semi-conductor + insulation + chamfer) Semi-conductor + insulation ASI/ 40-80 Used with (except GRI-RTE) BMFD 50-160 40
Edition - July 2012 HV – MULTIFUNCTIONS CAMF5/55-160-NS C A M F5 / 55160 NS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 K7/INS K7/FNS FUNCTIONS CHARACTERISTICS The CAMF5/55-160-NS tool removes  Covers cable diameter ranging from the semiconductor while leaving a very 55 to 160mm clean surface on the insulation, in  Removal of bonded semiconductor, addition to striping the insulation layer leaving a conical outline  Very clean surface finish As a multi-function tool, additional  Reversible blade add-ons allows it to also perform:  Removal of insulation  Supplied in plastic case Chamfer on the insulation  Substantial reduction for time Grooves on the insulation Increased conical outline on the previously needed to sand the bonded semi-conductor screen insulation This tool does not require silicone to be operated. www.alroc.fr commercial@alroc.fr L: l: H: Edition 09/ 2011 /A1 – Illustrations non contractuelles 41 700 mm 255 mm 180 mm Weight : 9.5kg
Edition - July 2012 HV – MULTIFUNCTIONS CMF4/60-110-NS CMF5/100-160-NS C M F NS Optional blade add-on: K7/ISOLANT-NS K7/SEMI-NP-NS FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr CHARACTERISTICS CMF* NS tool case allows to remove the bonded semiconductor and the insulation. It also allows to perform a channel on the insulation from HV cables.     Bonded semi-conductor removal Insulation removal Channel realization in the insulation Semi-conductor removal with a very clean surface and a sketch of cone This tool does not require silicone to be operated. Cable diameter Ref : Weight 60 - 110 mm CMF4/60-110-NS 5,6 kg 100 - 160 mm CMF5/100-160-NS 11,4 kg Edition 01/ 2011 /A0 – Illustrations non contractuelles 42
Edition - July 2012 HV – MULTIFUNCTIONS K7/FSC (pour MF4/60-110-NS et MF5/100-160-NS) K 7 / F S C FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 K7/FSC is specially designed to remove bonded semi-conductor from cables by performing a taper/ cone on the semiconductor screen while keeping a very clean surface on the insulation CHARACTERISTICS Bonded semi-conductor removal Performs a taper/ cone on the bonded semi-conductor Very clean surface on insulation Substantial reduction of time sanding  K7/FSC can be installed on MF4/60-110 and MF5/100-160 tools. Compatible with MF4/60-110 or MF5/100-160 tools. www.alroc.fr commercial@alroc.fr Edition 11/ 2006 /A0 – Illustrations non contractuelles 43
Edition - July 2012 HV – MULTIFUNCTIONS ASI/40-80 A S I / 4080 FUNCTIONS CHARACTERISTICS The ASI/40-80 tool allows to strip Bonded semi-conductor stripping. the bonded semi-conductor and to remove the insulation. Insulation removal Z.I de la fonderie 72160 Tuffé FRANCE Capacity : Ø40 à 80mm Option : BMF thrust allows to perform a perfect and clean stop on the insulation or on the bonded semi-conductor. Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 L: l: H: www.alroc.fr commercial@alroc.fr Edition 05/ 2007 /A1 – Illustrations non contractuelles 44 420 mm 130 mm 100 mm Poids : 3250g
Edition July 2012 HV – -MULTIFUNCTIONS GRI-RTE G R I R T E FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE CHARACTERISTICS GRI scraper allows to remove the outer bonded semi-conductor screen’s residuals left on the cable insulation Scraping of the semi-conductor residual Comes in it a plastic case L: l: H: Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Edition 11/ 2009 /A0 – Illustrations non contractuelles 45 250 mm 40 mm 25 mm Weight : 190g
Edition - July 2012 46
Edition - July 2012 MOTORIZED MULTIFUNCTIONS (SEMI-CONDUCTOR SCREEN + INSULATION) 47
Edition - July 2012 Product range overview Electrically powered sanding C/PP AML/50-95 AML/95-150 Motorized, semi-conductor + insulation (toothed transmission belt) Motorized, semi-conductor + insulation (transmission using gears) AML/20-50 48
Edition - July 2012 HV – MULTIFUNCTIONS AML AML 20-50 A M L AML 95-150 AML 50-95 FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr CHARACTERISTICS The AML machine removes the bonded semi-conductive insulation shield and also a fine layer of insulation if required. Bonded semi-conductor removal Electrical powered tool Distribution using gears for the AML 20-50 and toothed belt for the 50-95 and the 95-150 AML. Cable diameter Ref : Weight 20 - 50 mm AML 20-50 8,2 kg 50 - 95 mm AML 50-95 13,5 kg 95 - 150 mm AML 95-150 19,7 kg Edition 02/ 2012 /A6 – Illustrations non contractuelles 49
Edition - July 2012 HV – MULTIFUNCTIONS K7i/ K7i/ - FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr CHARACTERISTICS K7i/1, K7i/2 and K7i/3 are specially conceived to remove the insulation using AML machines. Ref. K7i/1 K7i/2-15 K7i/2 K7i/3 AML 20-50 5 – 16 mm Non compatible Non compatible Non compatible Insulation removal K7I/1 is installed on the AML20-50 tool K7I/2 is installed on the AML50-95 tool K7I/3 is installed on the AML95-150 tool Stripping Thickness min + max AML 50-95 6 – 17 mm 2 – 15 mm 11 – 24 mm Non compatible Edition 02/ 2010 /A1 – Illustrations non contractuelles 50 AML 95-150 6 – 17 mm 2 – 15 mm 11 – 24 mm 16 – 34 mm
Edition - July 2012 HV – MULTIFUNCTIONS C/PP C / P P FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE The ALROC portable sanding machine is used to take out the roughnesses on the cable after using the ALROC tools LHS and AML CHARACTERISTICS Sandpaper the cables Delivered in case with grease pomp L: l: H: 505 mm 360 mm 120 mm Weight : 5,5 kg Case weight : 9.6kg Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Edition 02/ 2012 /A3 – Illustrations non contractuelles 51
Edition - July 2012 52
Edition - July 2012 CABLE CLAMP 53
Edition - July 2012 HV – MULTIFUNCTIONS BMFD/50-160 B M F D / 50160 FUNCTIONS The BMFD/50-160 thrust has 3 clamping positions to cover a wider range of cable diameters. Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr CHARACTERISTICS 3 clamping positions Is used with teh following tools - AMF5/55-160-NS - ASR/70-110 The BMFD/50-160 thrust is - MF4/60-110-NS - ASR/100-160 reversible and designed for two - MF5/100-160-NS - DMSR/80-160 functions : - LHP4 - CHN4-60-110-NS - LHP5 - CHN5-100-160-NS 1. It is used as a stop for the tool - AUG5/60-160 with its pads. 2. It serves as a running surface Capacity : Ø50-160mm of the ALROCONE rollers. L: 345 mm Weight : 2.5 kg l: 245 mm (Supplied with 2 sets of plates) H: 50 mm Edition 03/ 2011 /A2 – Illustrations non contractuelles 54
Edition - July 2012 AFTER SALES SERVICE 55
Edition - July 2012 MAINTENANCE Maintenance of ALROC cases Before After Actions  Blade replacement Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 Objectifs Restore the state of the tools to brand new  Wear plates installation  Re-calibration of all tools.  Exchange of worn parts.  Marking on the cases for follow up maintenance tracability www.alroc.fr commercial@alroc.fr Edition 03/ 2008 /A0 Illustrations non contractuelles 56  Ensures optimum performance from the tools
Edition - July 2012 TERMS OF SALES 1. DEMAND ACCEPTANCE Orr tenders aren’t valid that to acceptance by return letter. Engagements taken by our reps aren’t definitely valid after have been recording by our company. For unserviceable part, quantity of products delivered and invoiced could be superior of 10 per cent of the quantity ordered. The annulment of order during execution or finishing don’t accepted. 2. PAYMENT STIPULATION Orr payment stipulations get on with compensating payment to Mans. Orr invoices are payable to cash, without discount, except particular agreement between party. According to the law 92-1442 on December 31st 1990, in case of delay payment in comparison with the date of payment, penalty are due, they are calculated by using to minimum the equal rate once and half the legal interest rate of civil year, preceding the date of invoice between the date of payment representing on the invoice and the date of payment received. All delay or failure to pay or substantial changing in the situation of buyer at exacted a payment before all new expeditions. 3. DELAY AND DELIVRING Delay of delivering leave of day of acceptance of order, they are gave at indicative title and without guarantee. The delay of delivering can’t give place at reducing of price, any penalty or indemnity according previous express acceptance and to written of our company, with reciprocity equal premium in case of advantage at the delivering, our company is freeing of all relative mortgaging at the delay of delivering in the case of absolute necessity as: shore, fire, manufacture or set of tools accident, default of raw, stop of driving force, etc, these cases carry the suspension of delivering and extend the delay laid down. In case of defectiveness, our responsibility restrict oneself to the slight alteration of defective part or at their pure and simple replacing in the shorter possible delay, without others consequences, any cost or indemnity. The complaints must be in by the latter, six day after receipt of goods. After this delay, our company doesn’t admit it. 4. TRANSFER OF RISKS Whatever the mode of expedition, our goods exclusively travel at one’s own risk of customer part. All our expedition are famous according made at the order of buyer and to his account, except contrary expressly formulated willing. It will belong buyer to make firm the goods sold from their exit of our factory and this until the date of transfer of property against all risks of damage of destruction or of responsibility caused or suffered by them. 5. CLAUSE OF SHARE OF PROPERTY According to the law 80-335 on May 12th 1980, the transfer of property of our products is suspended until entire payment of their price in principal and accessory same in case of concession of delay of payment. The application of this clause wouldn’t, in anyone case, to modify the application of conditions concerning the transfer of risks. Don’t constitute a payment the discount of bill accepted or other titles creating an obligation to pay. Buyer wills became proprietor at the moment of payment effectively credited at our bank, of the last maturity, with accessory cost. In consequence, in case of partial or total no-payment of price at the maturity for any cause whatever, our company could be required from full right and without formality the restitution of products sold at the cost, one’s own risk of buyer. 6. JURISDICTION ASSIGNING In case of contesting or litigation of any mature whatever, the trade tribunal of LE MANS will be only competent, same in case of appeal in guarantee or of plurality of defendant. The present sale general stipulation to apply oneself to all orders recorded by our company to the exclusion of all clause representing on the letters and bill of order from our customer except express and written acceptance by our care. Tel: +44 (0)191 490 1547 Fax: +44 (0)191 477 5371 Email: northernsales@thorneandderrick.co.uk Website: www.cablejoints.co.uk www.thorneanderrick.co.uk 57

More Related Content

PPTX
2-cours prise de terre.pptx
byfellahi1
 
PDF
Brugg Cable Tools - High Voltage Cable Jointing Tools
byThorne & Derrick International
 
PPTX
ELECTRICAL INSTALLATIONS PPT (1).pptx
byrajalakshmi769433
 
PDF
Lecture1
byFahad Zia
 
PPT
Electricité
bySami Sahli
 
PPTX
installing-electrical-protective-devices-for-distribution-power-lightning-pro...
byfranciscomacatugob1
 
PDF
Substation grounding grid design using Alternative Transients Program-ATP and...
byJose Dariel Arcila
 
PDF
NH fuse System catalogues
bydhanasekarram
 
2-cours prise de terre.pptx
byfellahi1
 
Brugg Cable Tools - High Voltage Cable Jointing Tools
byThorne & Derrick International
 
ELECTRICAL INSTALLATIONS PPT (1).pptx
byrajalakshmi769433
 
Lecture1
byFahad Zia
 
Electricité
bySami Sahli
 
installing-electrical-protective-devices-for-distribution-power-lightning-pro...
byfranciscomacatugob1
 
Substation grounding grid design using Alternative Transients Program-ATP and...
byJose Dariel Arcila
 
NH fuse System catalogues
bydhanasekarram
 

What's hot

PDF
Cours-Electricité Industrielle.pdf
bySAID MASHATE
 
PDF
Cours-_Energie-Solaire-Photovoltaïque.pdf
byyoucefhammou40
 
PPTX
Soutenance rapport ht 60k v nahidi hassan
byriemmen
 
PDF
chap.4.Installations Pneumatiques (1).pdf
byAbdelmadjidChait
 
PDF
VR-8 step voltage regulator
byJoeChueng
 
PDF
Iec 60364 4-442
byMaria Jimenez
 
PDF
Rme final eim-nc-i-ivpresentation-rev1
byaxelrovelo
 
PDF
Tema Canalizaciones electricas
byAkacsuki
 
PDF
Single line diagram ats apfc
bySajeewa Lakmal
 
PPTX
Ampacity.pptx
byJohnleoClaus2
 
PPTX
Slide Presentation-Electrical Circuits.pptx
byJocelBaquilar
 
PPTX
Unit 01 electrical wiring diagrams
byParneet Chowdhary
 
PPTX
How to use a Multimeter
byJens Brynildsen
 
PPTX
Troubleshooting Electrical Faults
bySimutech Multimedia
 
PDF
Sel 351 a
byEdmilson Arruda
 
PDF
Le dimensionnement d'une batterie en installation solaire
bysalem ben moussa
 
PPTX
تحسين معامل القدرة وكيفيه حساب المكثفات
byIslam Hesham
 
PPTX
report on electrical wiring
byAbhidada123
 
PPT
Cell Analog Blind Kid's Seventh Grade Project: A cell is like a krispy kreme ...
byJohn Gerancher
 
PPT
Earthing Arrangements 17th
byPaul Holden
 
Cours-Electricité Industrielle.pdf
bySAID MASHATE
 
Cours-_Energie-Solaire-Photovoltaïque.pdf
byyoucefhammou40
 
Soutenance rapport ht 60k v nahidi hassan
byriemmen
 
chap.4.Installations Pneumatiques (1).pdf
byAbdelmadjidChait
 
VR-8 step voltage regulator
byJoeChueng
 
Iec 60364 4-442
byMaria Jimenez
 
Rme final eim-nc-i-ivpresentation-rev1
byaxelrovelo
 
Tema Canalizaciones electricas
byAkacsuki
 
Single line diagram ats apfc
bySajeewa Lakmal
 
Ampacity.pptx
byJohnleoClaus2
 
Slide Presentation-Electrical Circuits.pptx
byJocelBaquilar
 
Unit 01 electrical wiring diagrams
byParneet Chowdhary
 
How to use a Multimeter
byJens Brynildsen
 
Troubleshooting Electrical Faults
bySimutech Multimedia
 
Sel 351 a
byEdmilson Arruda
 
Le dimensionnement d'une batterie en installation solaire
bysalem ben moussa
 
تحسين معامل القدرة وكيفيه حساب المكثفات
byIslam Hesham
 
report on electrical wiring
byAbhidada123
 
Cell Analog Blind Kid's Seventh Grade Project: A cell is like a krispy kreme ...
byJohn Gerancher
 
Earthing Arrangements 17th
byPaul Holden
 

Similar to Alroc Tools - Cable Stripping & Preparation Tools For LV HV Cable Jointers

PDF
Catalogue Euro Service O E M Products
byEURO SERVICE A/S
 
PDF
BLS-Series, Double-Acting Climbing Jacks - HiPress
byHi Press Hydrualics Ltd
 
PDF
Izumi Cutting & Crimping Tools for Overhead Line Conductors & Cables - Izumi ...
byThorne & Derrick International
 
PDF
CASE 1150L Crawler Dozer Service Repair Manual Instant Download.pdf
bynaoji181714047
 
PDF
Case 1150 l crawler dozer service repair manual
byfjjsekfksem
 
PDF
Case 1150 l crawler dozer service repair manual
byfusjezsfkskefmsme
 
PDF
Izumi REC-S524 Battery Operated Cutters up to 24mm - Izumi Cutting Tools
byThorne & Derrick International
 
PPT
Husqvarna Construction Bauma 2010 Novinky
byRajmon
 
PDF
Industry Brochure - Aggregate
byBaldor Publishers Tour
 
PDF
Volvo L120C Wheel Loader Service Repair Manual
byabjekGoogle
 
PDF
TD63KBE Engine L90C Volvo Service Repair Manual.pdf
byabjekGoogle
 
PDF
Volvo L120C Wheel Loader Service Repair Manual
byabjekGoogle
 
PDF
Volvo L120C Wheel Loader Service Repair Manual.pdf
byabjekGoogle
 
PDF
TD73KDE Volvo L120C Wheel Loader Service Repair Manual.pdf
byabjekGoogle
 
PDF
Roxtec R Cable Transit Frame - Installation Instructions
byThorne & Derrick International
 
PDF
CASE 1150L Crawler Dozer Service Repair Manual Instant Download.pdf
bysang1818141471
 
PDF
Case 1150 l crawler dozer service repair manual instant download
byufsjejfsekeme
 
PDF
CASE 1150L Crawler Dozer Service Repair Manual Instant Download.pdf
bygongyi2122252
 
PDF
CASE 1150L Crawler Dozer Service Repair Manual.pdf
byfujsekdmdm4r
 
PDF
Case 1150 l crawler dozer service repair manual
byfujsejfkskemm
 
Catalogue Euro Service O E M Products
byEURO SERVICE A/S
 
BLS-Series, Double-Acting Climbing Jacks - HiPress
byHi Press Hydrualics Ltd
 
Izumi Cutting & Crimping Tools for Overhead Line Conductors & Cables - Izumi ...
byThorne & Derrick International
 
CASE 1150L Crawler Dozer Service Repair Manual Instant Download.pdf
bynaoji181714047
 
Case 1150 l crawler dozer service repair manual
byfjjsekfksem
 
Case 1150 l crawler dozer service repair manual
byfusjezsfkskefmsme
 
Izumi REC-S524 Battery Operated Cutters up to 24mm - Izumi Cutting Tools
byThorne & Derrick International
 
Husqvarna Construction Bauma 2010 Novinky
byRajmon
 
Industry Brochure - Aggregate
byBaldor Publishers Tour
 
Volvo L120C Wheel Loader Service Repair Manual
byabjekGoogle
 
TD63KBE Engine L90C Volvo Service Repair Manual.pdf
byabjekGoogle
 
Volvo L120C Wheel Loader Service Repair Manual
byabjekGoogle
 
Volvo L120C Wheel Loader Service Repair Manual.pdf
byabjekGoogle
 
TD73KDE Volvo L120C Wheel Loader Service Repair Manual.pdf
byabjekGoogle
 
Roxtec R Cable Transit Frame - Installation Instructions
byThorne & Derrick International
 
CASE 1150L Crawler Dozer Service Repair Manual Instant Download.pdf
bysang1818141471
 
Case 1150 l crawler dozer service repair manual instant download
byufsjejfsekeme
 
CASE 1150L Crawler Dozer Service Repair Manual Instant Download.pdf
bygongyi2122252
 
CASE 1150L Crawler Dozer Service Repair Manual.pdf
byfujsekdmdm4r
 
Case 1150 l crawler dozer service repair manual
byfujsejfkskemm
 

More from Thorne & Derrick International

PDF
Emtelle Fibre Optic Cables - Product Catalogue 2016
byThorne & Derrick International
 
PDF
CATU Electrical Safety Catalogue
byThorne & Derrick International
 
PDF
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
byThorne & Derrick International
 
PDF
Ripley Utility Tool Cable Preparation Tools
byThorne & Derrick International
 
PDF
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
byThorne & Derrick International
 
PDF
3M Electrical Products Stocked By Thorne & Derrick International
byThorne & Derrick International
 
PDF
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
byThorne & Derrick International
 
PDF
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
byThorne & Derrick International
 
PDF
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
byThorne & Derrick International
 
PDF
Roxtec Cable Transit - B Frame Dimensional Drawing
byThorne & Derrick International
 
PDF
Isolation procedures for safe working on electrical systems and equipment by ...
byThorne & Derrick International
 
PDF
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
byThorne & Derrick International
 
PDF
Thorne & Derrick Process Heating Brochure 2016
byThorne & Derrick International
 
PDF
RIDGID micro CD100 Combustible Gas Detector
byThorne & Derrick International
 
PDF
T&D Experts In Equipment For Explosive Atmospheres
byThorne & Derrick International
 
PDF
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
byThorne & Derrick International
 
PDF
Itron Fact Sheet
byThorne & Derrick International
 
PDF
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
byThorne & Derrick International
 
PDF
Ultrasonic Flow Meters - Customer Specification Demand
byThorne & Derrick International
 
PDF
The Children North East Annual Golf Day Wednesday 9th May 2018
byThorne & Derrick International
 
Emtelle Fibre Optic Cables - Product Catalogue 2016
byThorne & Derrick International
 
CATU Electrical Safety Catalogue
byThorne & Derrick International
 
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
byThorne & Derrick International
 
Ripley Utility Tool Cable Preparation Tools
byThorne & Derrick International
 
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
byThorne & Derrick International
 
3M Electrical Products Stocked By Thorne & Derrick International
byThorne & Derrick International
 
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
byThorne & Derrick International
 
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
byThorne & Derrick International
 
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
byThorne & Derrick International
 
Roxtec Cable Transit - B Frame Dimensional Drawing
byThorne & Derrick International
 
Isolation procedures for safe working on electrical systems and equipment by ...
byThorne & Derrick International
 
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
byThorne & Derrick International
 
Thorne & Derrick Process Heating Brochure 2016
byThorne & Derrick International
 
RIDGID micro CD100 Combustible Gas Detector
byThorne & Derrick International
 
T&D Experts In Equipment For Explosive Atmospheres
byThorne & Derrick International
 
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
byThorne & Derrick International
 
Itron Fact Sheet
byThorne & Derrick International
 
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
byThorne & Derrick International
 
Ultrasonic Flow Meters - Customer Specification Demand
byThorne & Derrick International
 
The Children North East Annual Golf Day Wednesday 9th May 2018
byThorne & Derrick International
 

Recently uploaded

PDF
10k to 5k followers Twitter Accounts for Sale.pdf
by2oe47406ufcwa3h5xe3s
 
PDF
Top 10 Sites To Buy Verified Binance Accounts.pdf
byndsfcm3nubx18jc4s6f4
 
PDF
Dimi Design Intelligence Parts V and VI.pdf
byBrij Consulting, LLC
 
PDF
IT Solutions for Startups & Small to Mid-Sized Businesses
byDevout Tech Consultants
 
DOCX
How to buy Yahoo accounts and Outlook accounts in 2026..docx
bygetsmmpro getsmmpro
 
PDF
Comments on Dimi Design Intelligence Addendum, All Parts.pdf
byBrij Consulting, LLC
 
PDF
Best 12 Ways to Buy Verified Chime Bank Accounts in 2025.pdf
by4b6fi2jol3skajahxend
 
PDF
5 sites To Buy Facebook Accounts Safely_ 2025 Guide..pdf
bysy33nn1pvm0ykdle9x4r
 
PDF
Trusted Platforms For Buying Verified OnlyFans Accounts in 2026.pdf
bysy33nn1pvm0ykdle9x4r
 
PDF
The Best Marketplaces to Buy and Sell Snapchat Accounts ....pdf
bysy33nn1pvm0ykdle9x4r
 
PDF
Buy TikTok Seller Account in usa 2026.pdf
bysy33nn1pvm0ykdle9x4r
 
DOCX
7 Best Place To Buy Verified PayPal Accounts in USA.docx
bygetsmmpro getsmmpro.com
 
PDF
5 Easiest Ways to Buy Snapchat Accounts in the US.pdf
byGoogle Business Site is usaallhub
 
DOCX
Buying Telegram Accounts for Channels & Groups_ Old & New in the US.docx
byGoogle Business Site is usaallhub
 
PDF
Top 11 Guide on Buying Telegram Accounts in 2025 .pdf
byusaallsell
 
DOCX
The Ultimate Guide to Bulk Purchasing Old Gmail Accounts.docx
byBuy Verified Cash App Accounts
 
PDF
How to Buy LinkedIn Followers and Connections.pdf
bysy33nn1pvm0ykdle9x4r
 
PDF
Encyclopedia of Cyber Warfare by Paul J. Springer (z-lib.org).pdf
byolongapopnp
 
PDF
David Slone Denver - President Of Lead 2 Serve
byDavid Slone Denver
 
PDF
GLIMPSE OF 2025 -- TECH EHS Solution | 18 Years of EHS Experties
byTECH EHS Solution
 
10k to 5k followers Twitter Accounts for Sale.pdf
by2oe47406ufcwa3h5xe3s
 
Top 10 Sites To Buy Verified Binance Accounts.pdf
byndsfcm3nubx18jc4s6f4
 
Dimi Design Intelligence Parts V and VI.pdf
byBrij Consulting, LLC
 
IT Solutions for Startups & Small to Mid-Sized Businesses
byDevout Tech Consultants
 
How to buy Yahoo accounts and Outlook accounts in 2026..docx
bygetsmmpro getsmmpro
 
Comments on Dimi Design Intelligence Addendum, All Parts.pdf
byBrij Consulting, LLC
 
Best 12 Ways to Buy Verified Chime Bank Accounts in 2025.pdf
by4b6fi2jol3skajahxend
 
5 sites To Buy Facebook Accounts Safely_ 2025 Guide..pdf
bysy33nn1pvm0ykdle9x4r
 
Trusted Platforms For Buying Verified OnlyFans Accounts in 2026.pdf
bysy33nn1pvm0ykdle9x4r
 
The Best Marketplaces to Buy and Sell Snapchat Accounts ....pdf
bysy33nn1pvm0ykdle9x4r
 
Buy TikTok Seller Account in usa 2026.pdf
bysy33nn1pvm0ykdle9x4r
 
7 Best Place To Buy Verified PayPal Accounts in USA.docx
bygetsmmpro getsmmpro.com
 
5 Easiest Ways to Buy Snapchat Accounts in the US.pdf
byGoogle Business Site is usaallhub
 
Buying Telegram Accounts for Channels & Groups_ Old & New in the US.docx
byGoogle Business Site is usaallhub
 
Top 11 Guide on Buying Telegram Accounts in 2025 .pdf
byusaallsell
 
The Ultimate Guide to Bulk Purchasing Old Gmail Accounts.docx
byBuy Verified Cash App Accounts
 
How to Buy LinkedIn Followers and Connections.pdf
bysy33nn1pvm0ykdle9x4r
 
Encyclopedia of Cyber Warfare by Paul J. Springer (z-lib.org).pdf
byolongapopnp
 
David Slone Denver - President Of Lead 2 Serve
byDavid Slone Denver
 
GLIMPSE OF 2025 -- TECH EHS Solution | 18 Years of EHS Experties
byTECH EHS Solution
 

Alroc Tools - Cable Stripping & Preparation Tools For LV HV Cable Jointers

  • 1.
    HIGH VOLTAGE CATALOG July 2012 ALROC Z.I.de la Fonderie 72160 Tuffé FRANCE Tel. : +33 (0)2 43 71 11 80 Fax : +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Tel: +44 (0)191 490 1547 Fax: +44 (0)191 477 5371 Email: northernsales@thorneandderrick.co.uk Website: www.cablejoints.co.uk www.thorneanderrick.co.uk Edition July 2012 – Illustrations non contractual
  • 2.
    Edition - July2012 The SIBILLE INDUSTRIE GROUP ESP division is a manufacturer of electrical safety equipment. Our products are intended for technicians and teams who build, maintain and operate power systems in a high-risk environment (low, medium and high voltage). The goals aspired to by our group since its creation are to:  Protect individuals against electrical risks  Provide products ensuring maximum security  Develop risk prevention among those working within the industry ESP focuses on innovation in order to provide solutions adapted to evolving global technological networks and thereby effectively optimizes power distribution and management. OUR VALUES  Customer satisfaction by providing innovative, quality products  100% of our factories are in France  Employee satisfaction through a respectful and participative management system 2
  • 3.
    Edition - July2012 Established in 1940, ALROC has become as of the late 1980’s one of the worldwide leading companies specialized in the fabrication of cable preparation tools and machines to prepare: - Electrical cables (low, medium and high voltage) - Optic fiber and telecommunication cables - Coaxial and special cables Fondée en 1940, la société ALROC, a su se positionner comme le leader mondial depuis la fin des années 1980 dans la fabrication des outils et machines pour la préparation des câbles : - Electriques (basse, moyenne et haute tensions) - Fibres optiques et téléphoniques - Coaxiaux et spéciaux As of December 2007, ALROC is now part of the group SIBILLE INDUSTRIE and has exported its products to more than 50 countries to date. ALROC a rejoint le groupe SIBILLE INDUSTRIE depuis décembre 2007, et a exporté ses produits dans plus de 50 pays à ce jour. ALROC is equipped with the best high-tech machines tools and data processing systems to design and to manufacture its products. La société ALROC s’est dotée des moyens technologiques et informatiques les plus performants pour concevoir (C.A.O., F.A.O. G.P.A.O.), fabriquer ses produits (centres d’usinage et tours à commande numérique, injection plastique). Consequently, ALROC offers customized design to meet specific customer requirements. De cette manière, ALROC apporte des réponses sur mesure aux besoins spécifiques de sa clientèle. Technical Support Support Technique Beyond the technical hotline, ALROC is also equipped with an audiovisual system to offer live visual assistance with our users. Au-delà du support téléphonique, ALROC est aussi dotée d’un système audiovisuel afin d’offrir un support technique en direct auprès de vos collaborateurs. In addition to the above, ALROC also offers training sessions on site with a view on training in the handling of the tools. ALROC est aussi en mesure d’offrir une formation prise en main dans ses locaux. Bureau d’étude Engineering department Fonderie Foundry shop Montage Assembly line Injection plastique Plastic injection Centres d’usinage à commande numérique Machine tool shop Tour à commande numérique Machine tool shop 3
  • 4.
    Edition - July2012 INDEX OUTER JACKET ................................................................................................ 7 Single cut (reinforced & alarmed) for outer jacket - DMSR....................... 9 Jacket spreader - EGA .............................................................................. 11 Lead spreader - EVP EV HTB ................................................................ 12 Cable handler - CAS ................................................................................. 13 Double cut for outer jacket - DM25-60-DC.............................................. 14 Single cut for outer jacket - DM .............................................................. 15 Single cut (alarmed) for outer jacket - DMS ........................................... 16 Semi-conductor remover on outer jacket - AUG5/60-160 ...................... 17 SEMI-CONDUCTOR ..................................................................................... 19 See also multifunctions tools CAMF5, CMF4, CMF5, AML and C/PP LHS ........................................................................................................... 21 Restore cylindrical shape - ASR................................................................ 22 Restore cylindrical shape with superiror finition - ASR/F ........................ 23 INSULATION ................................................................................................... 25 See also multifunctions tools CAMF5, CMF4, CMF5, AML and C/PP LH ............................................................................................................. 27 4
  • 5.
    Edition - July2012 CHANNEL & CONE ON INSULATION.................................................... 29 Cone on insulation NO SILICONE - CHN - NS ........................................... 31 Cone finishing - TC ................................................................................... 32 Channel - LHP ........................................................................................... 33 Channel NO SILICONE - LHP5 NS ............................................................. 34 Choice of blades for LHP tools .................................................... 35 MULTIFUNCTIONS (SEMI-CONDUCTOR + INSULATION) ........................... 39 SUPER FINITION + NO SILICONE - CAMF5/55-160-NS ............................ 41 NO SILICONE - CMF4/60-110-NS CMF5/100-160-NS ........................... 42 K7/FSC (pour MF4/60-110-NS et MF5/100-160-NS) .................. 43 ASI/40-80 ................................................................................................. 44 GRI-RTE .................................................................................................... 45 MOTORIZED MULTIFUNCTIONS (SEMI-CONDUCTOR + INSULATION) 47 AML .......................................................................................................... 49 Blade add-on to remove insulation - K7i/ ................................... 50 Electrical sander - C/PP ........................................................................... 51 CABLE CLAMP................................................................................................ 53 For Ø >50mm, cable clamp for all HTB ALROC tools - BMFD/50-160 .... 54 SAV..................................................................................................................... 55 5
  • 6.
    Edition - July2012 OUTER JACKET p.7 - 17 SEMI-CONDUCTOR SCREEN p.19 – 23 MULTIFUNCTIONS p. 39 - 51 INSULATION p. 25 - 35 MULTIFUNCTIONS p. 39 - 51 6
  • 7.
    Edition - July2012 OUTER JACKET 7
  • 8.
    Edition - July2012 Product range overview AUG5/60-160 DMSR 80-160 DMSR 40-90 DMS 50-95 DMS 95-145 DM 50-95 Semi-conductor on jacket Reinforced jacket removal tool with sound alarm Jacket removal tool with sound alarm DM 95-145 DM 30-60 Basic jacket removal tool DM 25-60-DC Used with Optional EGA / EVP / EV HTB / CAS BMFD 50-160 8
  • 9.
    Edition - July2012 HV – Outer Jacket DMSR  New steel reinforced position indicator for circular & longitudinal cut D M S R  Incorporated detection system rolls on an adhesive aluminium tape Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Edition 02/ 2010 /A0 – Illustrations non contractuelles 9
  • 10.
    Edition - July2012 HV – Outer Jacket DMSR D M S R FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr CHARACTERISTICS The DMSR 40/90 is specially  Removes the outer jacket designed to remove the HDPE outer sheath also lead sheath of  Change of longitudinal to circular every thickness on high voltage cutting without loosing tool from cables. The DMS/R is very solid to the cable. remove heavy outer sheath. A comparator allow a precise  Comparator for a precise cutting cutting of the alu or lead. .sheath. L: 370 mm Weight : 7.7kg l: 155 mm H: 470 mm Dimension Cable diameter Max cutting Réf : Weight capacity depth DMSR/40-90 40 - 90mm 11mm 370 x 155mm 7,7kg DMSR/80-160 80 - 160mm 11mm 400 x 160mm 10,5kg Edition 02/ 2008 /A0 – Illustrations non contractuelles 10
  • 11.
    Edition - July2012 HV – Outer Jacket EGA E G A * FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE CHARACTERISTICS EGA tool allows to spread and to Outer sheath spreading from HV cables. remove the outer sheath from HV cables after realization of Note : for more facility, spread the longitudinal and circular cut. outer sheath using a pair of EGA. L: l: H: Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Edition 02/ 2010 /A2 – Illustrations non contractuelles 11 430 mm 120 mm 40 mm Weight : 1,2 kg
  • 12.
    Edition - July2012 HV – Lead Outer Jacket EVP EV HTB E V FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE EVP and EV-HTB spreaders facilitate the lead spreading in regards to the semi-conductive sheet. CHARACTERISTICS Lead sheath spreading EVP for LV and MV cables EV-HTB for HV cables Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Edition 10/ 2005 /A4 – Illustrations non contractuelles 12
  • 13.
    Edition - July2012 HV – Outer Jacket CAS C A S FUNCTIONS CHARACTERISTICS The key strap CAS can handle HV cables without damaging them.  Handling cables Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Ref : Width of strap Lenght of the handle Weight CAS/1 75 mm 450 mm 3 kg CAS/2 150 mm 600 mm 4.5 kg Edition 02/ 2008 /A0 – Illustrations non contractuelles 13
  • 14.
    Edition - July2012 HV – Outer Jacket DM25-60-DC D M 2560DC FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE The DM25/60 tool is designed to realize a longitudinal cut to remove HDPE outer jackets as well as lead sheath. Application example : Outer sheath control on drum in factory. CHARACTERISTICS  Circular and longitudinal cutting on cable's outer sheath.  Sold in plastic case  Capacity : Ø25 - 60mm  maximum cutting depth: 7mm L: l: H: Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Edition 07/ 2009 /A0 – Illustrations non contractuelles 14 500 mm 300 mm 220 mm Weight: 6.7kg
  • 15.
    Edition - July2012 HV – Outer Jacket DM D M FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 CHARACTERISTICS The DM is designed to remove PEHD or lead o of variable thickness from high voltage cables. Removes outer sheath from high voltage cables Supplied with plastic case Cable diameter Max thickness Ref : Weight 30 - 60 mm 7 mm DM 30-60 4.1 kg 50 - 95 mm 7 mm DM 50-95 4.3 kg 95 - 145 mm 11 mm DM 95-145 5.0 kg www.alroc.fr commercial@alroc.fr Edition 12/ 2008 /A0 – Illustrations non contractuelles 15
  • 16.
    Edition - July2012 HV – Outer Jacket DMS D M S FUNCTIONS CHARACTERISTICS The DMS is designed to remove polyethylene jackets of variable thickness from high voltage cables. Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Removes outer sheath from high voltage cables Audible sound indication when The incorporated sound alarm metallic shield is reached system warns when the blade is in contact with the lead/ aluminium Supplied with plastic case shield. Cable diameter Max thickness Ref : Weight 50 - 95 mm 7 mm DMS 50-95 4 kg 95 - 145 mm 11 mm DMS 95-145 5 kg Edition 01/ 2006 /A4 – Illustrations non contractuelles 16
  • 17.
    Edition - July2012 HV – Outer Jacket AUG5/60-160 A U G 5 / 60160 FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE CHARACTERISTICS The AUG5/60-160 tool can be used for peeling the bonded semi-conductor for cable preparations. Removing outer sheath Minimal peeling thickness: 2mm Capacity: 60 - 160mm Ø L: l: H: Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Edition 02/ 2010 /A3 – Illustrations non contractuelles 17 640 mm Weight : 8.6 kg 226 mm 113 mm
  • 18.
  • 19.
    Edition - July2012 SEMI-CONDUCTOR SCREEN 19
  • 20.
    Edition - July2012 Product range overview ASR/F 100-160 ASR/F 70-110 ASR/F 35-75 Restores cylindrical shape with superior finishing ASR/ 100-160 ASR/ 70-110 ASR/ 35-75 Restores cylindrical shape LHS5/ 100-140 LHS2/ 38-60 LHS3/ 60-80 Old generation LHS4/ 80-110 Used with BMFD 50-160 20
  • 21.
    Edition - July2012 HV – BONDED SEMI-CONDUCTOR LHS L H S FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr CHARACTERISTICS LH tools remove Bonded semiconductor leaving a correct finishing on the insulation. Bonded semi-conductor screen removal Semi-conductor diameter Ref : Weight 38 - 60 mm LHS2 2 kg 60 - 80 mm LHS3 3 kg 80 - 110 mm LHS4 4,5 kg 100 - 140 mm LHS5 6,5 kg Edition 10/ 2005 /A3 – Illustrations non contractuelles 21
  • 22.
    Edition - July2012 HV – BONDED SEMI-CONDUCTOR ASR ASR/100-160 A S R ASR/35-75 ASR/70-110 FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr CHARACTERISTICS  Removes the bonded semiconductor screen The ASR tool allows to remove the bonded semi-conductor without damaging the insulation layer, especially suited when the cable is not perfectly cylindrical.  Reshape cable to a cylindrical form on the insulation Diameter on the semi-conductor screen Ref : Weight 35 - 75 mm ASR/35-75 3 kg 70 - 110 mm ASR/70-110 4,6 kg 100 - 160 mm ASR/100-160 9,8 kg Edition 09/ 2006 /A4 – Illustrations non contractuelles 22
  • 23.
    Edition - July2012 HV – BONDED SEMI-CONDUCTOR ASR/F A S R /F ~20mm FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr The ASR tool allows to remove the bonded semi-conductor without damaging the insulation layer, especially suited when the cable is not perfectly cylindrical. In addition to the above, the finition is superior to the ASR tool. α = 10° CHARACTERISTICS  Removes the bonded semi-conductor screen  Reshape cable to a cylindrical form on the insulation  Cone preparation on the bonded semi-conductor  Clean surface finish on the insulation  Important reduction time through reduced sanding on the insulation Diameter on the semi-conductor screen Ref : Weight 35 - 75 mm 70 - 110 mm 100 - 160 mm ASR/F35-75 ASR/F70-110 ASR/F100-160 3,3 kg 4,8 kg 10 kg 23
  • 24.
  • 25.
    Edition - July2012 INSULATION 25
  • 26.
    Edition - July2012 Product range overview LH5/ 100-140 LH2/ 38-60 LH3/ 60-80 Old generation LH4/ 80-110 Used with (except C/PP) BMFD 50-160 26
  • 27.
    Edition - July2012 HV – BONDED SEMI-CONDUCTOR LH L H FUNCTIONS LH tools remove insulation from HTB cables. Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr CHARACTERISTICS Insulation removal Cable diameter Ref : Weight 38 - 60 mm LH2 2 kg 60 - 80 mm LH3 3 kg 80 - 110 mm LH4 5,9 kg 100 - 140 mm LH5 8,5 kg Edition 10/ 2005 /A4 – Illustrations non contractuelles 27
  • 28.
  • 29.
    Edition - July2012 E CHANNEL & CONES ON INSULATION 29
  • 30.
    Edition - July2012 Product range overview TC (all sizes possible, one TC per cable configuration) CHN-NS-100-160 CHN-NS-50-110 LHP5/50-140-NS Finishing of the cone Cone (NO SILICONE) Channel (NO SILICONE) (used without cable clamp) LHP5/ 100-140 LHP2/ 38-60 Channel (used with cable clamp) LHP4/ 60-110 Used with : (except for TC + LHP5/50-140NS) BMFD 50-160 30
  • 31.
    Edition - July2012 HV - INSULATION CHN - NS C H N NS FUNCTIONS CHARACTERISTICS LHC-NS tools allow to perform a straight cutting or tapers on cable insulation. Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Taper realization on cable insulation Supplied with cable clamp Use of tool without lubrication. Delivered in plastic case Cable diameter Ref : Weight 50 - 110 mm CHN4/60-110-NS 7.6 kg 100 - 160 mm CHN5/100-160-NS 13.3 kg Edition 03/ 2011 /A1 – Illustrations non contractuelles 31
  • 32.
    Edition - July2012 HV - INSULATION TC Cones are customized T C * Lg * Lenght of cone FUNCTIONS ALROC-TC tools taper the insulation Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr CHARACTERISTICS  TC tool is calibrated per cable section  Standard taper length : 30 to 40 mm  Ask for special taper lengths : 65 mm,95 mm,120 mm Tension Conductor section Cone lenght 6 / 10 kV 8.7 / 15 kV 12 / 20 kV 10² - 240² 25² - 630² 25² - 630² 30 - 40mm 18 / 30 kv 36 kv And above 50² - 1300² Consult us 40 – 65 – 95 – 120mm * Sections are given for illustrative purposes for cable tensions of 12 and 20kV Edition 04 / 2012 /A5 – Illustrations non contractuelles 32
  • 33.
    Edition - July2012 HV - INSULATION LHP L H P FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE CHARACTERISTICS The LHP tool allows to Realization of a groove in the insulation. remove a part of the insulation and the semiVarious blades add-ons can be mounted to conductor to make a channel realize any groove or channel shape. or a groove form. Requires a cable clamp to be operated (sold separately). Blades add-ons and blocks are sold separately Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 Cable diameter on insulation Ref : Weight 38 - 60 mm LHP2 2,7 kg www.alroc.fr commercial@alroc.fr 60 - 110 mm LHP4 4,5 kg 100 - 160 mm LHP5 10,5 kg Edition 09/ 2006 /A6 – Illustrations non contractuelles 33
  • 34.
    Edition - July2012 HV - INSULATION LHP5 NS L H P 5 NS FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE CHARACTERISTICS The LHP5/50-140-NS tool allows Realization of a groove in the insulation. to remove a part of the insulation and the semi-conductor to make Unlike the standard LHP tool, the LHP5 a channel or a groove form. NS does not require a cable clamp to be operated. This tool is used without lubrication. Delivered in plastic case. Capacity : Ø50 - 160mm L: 610 mm Weight : 10.1 kg l: 226 mm H: 122 mm Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Blades add-ons are sold separately Edition 04/ 2011 /A0 – Illustrations non contractuelles 34
  • 35.
    Edition - July2012 HV - INSULATION Choix des lames pour LHP L H P L FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE CHARACTERISTICS LHPL add-on blades are fitted on ALROC tools referenced LHP to perform a channel or a groove form on the insulation of HV cables. Realization of a channel on the insulation All groove forms and profiles upon request. Blades add-ons and blocks are sold separately. Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 Tool Tool capacity Reference LHP2 Ø38 - 60 mm LHPL2-… LHP4 Ø60 -110 mm LHPL4-… www.alroc.fr commercial@alroc.fr LHP5 Ø100 - 160 mm LHPL5-… LHP5 NS Ø50 - 140 mm LHPL5 NS -… Edition 09/ 2008 /A1 – Illustrations non contractuelles 35
  • 36.
    Edition - July2012 HV - INSULATION Choix des lames pour LHP 1- Blade for single groove Blade reference For tool : 5 LHP2 B maxi = 21 LHPL2-5 LHP4 B maxi = 30 LHPL4-5 LHP5 B maxi = 35 LHPL5-5 10 LHPL2-10 LHPL4-10 LHPL5-10 15 (14 for LHP2) LHPL2-14 LHPL4-15 LHPL5-15 20 LHPL4-20 LHPL5-20 25 LHPL4-25 Other dimensions upon request LHPL5-25 A (mm) 2- Blade for shouldered groove B C maxi D maxi For tool 2.5 3 11 15 LHP2 LHPL2-SP6 4 4 9.5 15 LHP2 LHPL4-SP6 10 3 13 30 LHP4 LHPL4-SP10 7 4.5 15 13 LHP4 LHPL4-SP11 7 5 15 13 LHP4 LHPL4-SP12 6 4 14.5 16 LHP4 LHPL4-SP14 4 4 20.5 16 LHP4 LHPL5-SP4 6 4 14.5 16 LHP5 4 4 20.5 16 All other dimensions upon request LHP5 LHPL5-SP5 C A D A B Blade reference LHPL2-SP5  The tools must be used when the cable is out of tension by skilled workers who are competent in cable preparation and know about electrical phenomenons.  Wearing anti-cut gloves is obligatory.  Clean the tools after each utilization. ALROC S.A.S – ZI de la Fonderie – 72160 TUFFE – FRANCE – Tél : 02.43.71.11.80 – Fax : 02.43.71.16.51 Internet :www.alroc.fr – Email :commercial@alroc.fr – S.A.S au capital de 800000€ – 341 050 987 RCS LE MANS – SIRET 341 050 987 00013 – APE 2453Z – TVA/FR 77 341 050 987 Edition 09/2008 /A1 – Illustrations non contractuelles Page 2/3 36
  • 37.
    Edition - July2012 HV - INSULATION Choix des lames pour LHP 3- Blade for shouldered groove with chamfer Blade reference LHPL2-SP3 A B C maxi D E For tool : 2.7 3 6.25 7 4 LHP2 LHPL2-SP4 4 3 5.6 5 2 LHP2 LHPL4-SP2 4 4 14.5 10 4 LHP4 LHPL4-SP3 6 4 14.5 10 4 LHP4 LHPL4-SP5 5.25 10 16.75 18.5 3 LHP4 LHPL5-SP2 4 4 14.5 10 4 LHP5 LHPL5-SP3 6 4 14.5 10 4 LHP5 All other dimensions upon request 4- Blade for shouldered groove with radius Blade reference LHPL2-SP1 A B C maxi D E For tool : 2.7 3 8.3 8.75 2.5 LHP2 LHPL4-SP7 8.25 5.5 13.75 13 3 LHP4 LHPL5-SP1 10 5 12 16.1 3 LHP5 Radius of 1.5mm in the back of the groove A except for the blade LHPL2-SP1 with sharp edges All other dimensions upon request We fabricate all types of blades upon request. Please send us a drawing with the desired result  The tools must be used when the cable is out of tension by skilled workers who are competent in cable preparation and know about electrical phenomenons.  Wearing anti-cut gloves is obligatory.  Clean the tools after each utilization. ALROC S.A.S – ZI de la Fonderie – 72160 TUFFE – FRANCE – Tél : 02.43.71.11.80 – Fax : 02.43.71.16.51 Internet :www.alroc.fr – Email :commercial@alroc.fr – S.A.S au capital de 800000€ – 341 050 987 RCS LE MANS – SIRET 341 050 987 00013 – APE 2453Z – TVA/FR 77 341 050 987 Edition 09/2008 /A1 – Illustrations non contractuelles page 3/3 37
  • 38.
  • 39.
    Edition - July2012 MULTIFUNCTIONS (SEMI-CONDUCTOR SCREEN + INSULATION) 39
  • 40.
    Edition - July2012 Product range overview Scrappers GRI-RTE CAMF5/55-160 NS CMF5/100-160 NS CMF4/60-110 NS Interchangeable Blade add-on SUPER FINITION + NO SILICONE (Semi-conductor + insulation + chamfer) Interchangeable Blade add-on NO SILICONE (Semi-conductor + insulation + chamfer) Semi-conductor + insulation ASI/ 40-80 Used with (except GRI-RTE) BMFD 50-160 40
  • 41.
    Edition - July2012 HV – MULTIFUNCTIONS CAMF5/55-160-NS C A M F5 / 55160 NS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 K7/INS K7/FNS FUNCTIONS CHARACTERISTICS The CAMF5/55-160-NS tool removes  Covers cable diameter ranging from the semiconductor while leaving a very 55 to 160mm clean surface on the insulation, in  Removal of bonded semiconductor, addition to striping the insulation layer leaving a conical outline  Very clean surface finish As a multi-function tool, additional  Reversible blade add-ons allows it to also perform:  Removal of insulation  Supplied in plastic case Chamfer on the insulation  Substantial reduction for time Grooves on the insulation Increased conical outline on the previously needed to sand the bonded semi-conductor screen insulation This tool does not require silicone to be operated. www.alroc.fr commercial@alroc.fr L: l: H: Edition 09/ 2011 /A1 – Illustrations non contractuelles 41 700 mm 255 mm 180 mm Weight : 9.5kg
  • 42.
    Edition - July2012 HV – MULTIFUNCTIONS CMF4/60-110-NS CMF5/100-160-NS C M F NS Optional blade add-on: K7/ISOLANT-NS K7/SEMI-NP-NS FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr CHARACTERISTICS CMF* NS tool case allows to remove the bonded semiconductor and the insulation. It also allows to perform a channel on the insulation from HV cables.     Bonded semi-conductor removal Insulation removal Channel realization in the insulation Semi-conductor removal with a very clean surface and a sketch of cone This tool does not require silicone to be operated. Cable diameter Ref : Weight 60 - 110 mm CMF4/60-110-NS 5,6 kg 100 - 160 mm CMF5/100-160-NS 11,4 kg Edition 01/ 2011 /A0 – Illustrations non contractuelles 42
  • 43.
    Edition - July2012 HV – MULTIFUNCTIONS K7/FSC (pour MF4/60-110-NS et MF5/100-160-NS) K 7 / F S C FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 K7/FSC is specially designed to remove bonded semi-conductor from cables by performing a taper/ cone on the semiconductor screen while keeping a very clean surface on the insulation CHARACTERISTICS Bonded semi-conductor removal Performs a taper/ cone on the bonded semi-conductor Very clean surface on insulation Substantial reduction of time sanding  K7/FSC can be installed on MF4/60-110 and MF5/100-160 tools. Compatible with MF4/60-110 or MF5/100-160 tools. www.alroc.fr commercial@alroc.fr Edition 11/ 2006 /A0 – Illustrations non contractuelles 43
  • 44.
    Edition - July2012 HV – MULTIFUNCTIONS ASI/40-80 A S I / 4080 FUNCTIONS CHARACTERISTICS The ASI/40-80 tool allows to strip Bonded semi-conductor stripping. the bonded semi-conductor and to remove the insulation. Insulation removal Z.I de la fonderie 72160 Tuffé FRANCE Capacity : Ø40 à 80mm Option : BMF thrust allows to perform a perfect and clean stop on the insulation or on the bonded semi-conductor. Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 L: l: H: www.alroc.fr commercial@alroc.fr Edition 05/ 2007 /A1 – Illustrations non contractuelles 44 420 mm 130 mm 100 mm Poids : 3250g
  • 45.
    Edition July 2012 HV– -MULTIFUNCTIONS GRI-RTE G R I R T E FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE CHARACTERISTICS GRI scraper allows to remove the outer bonded semi-conductor screen’s residuals left on the cable insulation Scraping of the semi-conductor residual Comes in it a plastic case L: l: H: Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Edition 11/ 2009 /A0 – Illustrations non contractuelles 45 250 mm 40 mm 25 mm Weight : 190g
  • 46.
  • 47.
    Edition - July2012 MOTORIZED MULTIFUNCTIONS (SEMI-CONDUCTOR SCREEN + INSULATION) 47
  • 48.
    Edition - July2012 Product range overview Electrically powered sanding C/PP AML/50-95 AML/95-150 Motorized, semi-conductor + insulation (toothed transmission belt) Motorized, semi-conductor + insulation (transmission using gears) AML/20-50 48
  • 49.
    Edition - July2012 HV – MULTIFUNCTIONS AML AML 20-50 A M L AML 95-150 AML 50-95 FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr CHARACTERISTICS The AML machine removes the bonded semi-conductive insulation shield and also a fine layer of insulation if required. Bonded semi-conductor removal Electrical powered tool Distribution using gears for the AML 20-50 and toothed belt for the 50-95 and the 95-150 AML. Cable diameter Ref : Weight 20 - 50 mm AML 20-50 8,2 kg 50 - 95 mm AML 50-95 13,5 kg 95 - 150 mm AML 95-150 19,7 kg Edition 02/ 2012 /A6 – Illustrations non contractuelles 49
  • 50.
    Edition - July2012 HV – MULTIFUNCTIONS K7i/ K7i/ - FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr CHARACTERISTICS K7i/1, K7i/2 and K7i/3 are specially conceived to remove the insulation using AML machines. Ref. K7i/1 K7i/2-15 K7i/2 K7i/3 AML 20-50 5 – 16 mm Non compatible Non compatible Non compatible Insulation removal K7I/1 is installed on the AML20-50 tool K7I/2 is installed on the AML50-95 tool K7I/3 is installed on the AML95-150 tool Stripping Thickness min + max AML 50-95 6 – 17 mm 2 – 15 mm 11 – 24 mm Non compatible Edition 02/ 2010 /A1 – Illustrations non contractuelles 50 AML 95-150 6 – 17 mm 2 – 15 mm 11 – 24 mm 16 – 34 mm
  • 51.
    Edition - July2012 HV – MULTIFUNCTIONS C/PP C / P P FUNCTIONS Z.I de la fonderie 72160 Tuffé FRANCE The ALROC portable sanding machine is used to take out the roughnesses on the cable after using the ALROC tools LHS and AML CHARACTERISTICS Sandpaper the cables Delivered in case with grease pomp L: l: H: 505 mm 360 mm 120 mm Weight : 5,5 kg Case weight : 9.6kg Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr Edition 02/ 2012 /A3 – Illustrations non contractuelles 51
  • 52.
  • 53.
    Edition - July2012 CABLE CLAMP 53
  • 54.
    Edition - July2012 HV – MULTIFUNCTIONS BMFD/50-160 B M F D / 50160 FUNCTIONS The BMFD/50-160 thrust has 3 clamping positions to cover a wider range of cable diameters. Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 www.alroc.fr commercial@alroc.fr CHARACTERISTICS 3 clamping positions Is used with teh following tools - AMF5/55-160-NS - ASR/70-110 The BMFD/50-160 thrust is - MF4/60-110-NS - ASR/100-160 reversible and designed for two - MF5/100-160-NS - DMSR/80-160 functions : - LHP4 - CHN4-60-110-NS - LHP5 - CHN5-100-160-NS 1. It is used as a stop for the tool - AUG5/60-160 with its pads. 2. It serves as a running surface Capacity : Ø50-160mm of the ALROCONE rollers. L: 345 mm Weight : 2.5 kg l: 245 mm (Supplied with 2 sets of plates) H: 50 mm Edition 03/ 2011 /A2 – Illustrations non contractuelles 54
  • 55.
    Edition - July2012 AFTER SALES SERVICE 55
  • 56.
    Edition - July2012 MAINTENANCE Maintenance of ALROC cases Before After Actions  Blade replacement Z.I de la fonderie 72160 Tuffé FRANCE Tel: +33 (0)2 43 71 11 80 Fax: +33 (0)2 43 71 16 51 Objectifs Restore the state of the tools to brand new  Wear plates installation  Re-calibration of all tools.  Exchange of worn parts.  Marking on the cases for follow up maintenance tracability www.alroc.fr commercial@alroc.fr Edition 03/ 2008 /A0 Illustrations non contractuelles 56  Ensures optimum performance from the tools
  • 57.
    Edition - July2012 TERMS OF SALES 1. DEMAND ACCEPTANCE Orr tenders aren’t valid that to acceptance by return letter. Engagements taken by our reps aren’t definitely valid after have been recording by our company. For unserviceable part, quantity of products delivered and invoiced could be superior of 10 per cent of the quantity ordered. The annulment of order during execution or finishing don’t accepted. 2. PAYMENT STIPULATION Orr payment stipulations get on with compensating payment to Mans. Orr invoices are payable to cash, without discount, except particular agreement between party. According to the law 92-1442 on December 31st 1990, in case of delay payment in comparison with the date of payment, penalty are due, they are calculated by using to minimum the equal rate once and half the legal interest rate of civil year, preceding the date of invoice between the date of payment representing on the invoice and the date of payment received. All delay or failure to pay or substantial changing in the situation of buyer at exacted a payment before all new expeditions. 3. DELAY AND DELIVRING Delay of delivering leave of day of acceptance of order, they are gave at indicative title and without guarantee. The delay of delivering can’t give place at reducing of price, any penalty or indemnity according previous express acceptance and to written of our company, with reciprocity equal premium in case of advantage at the delivering, our company is freeing of all relative mortgaging at the delay of delivering in the case of absolute necessity as: shore, fire, manufacture or set of tools accident, default of raw, stop of driving force, etc, these cases carry the suspension of delivering and extend the delay laid down. In case of defectiveness, our responsibility restrict oneself to the slight alteration of defective part or at their pure and simple replacing in the shorter possible delay, without others consequences, any cost or indemnity. The complaints must be in by the latter, six day after receipt of goods. After this delay, our company doesn’t admit it. 4. TRANSFER OF RISKS Whatever the mode of expedition, our goods exclusively travel at one’s own risk of customer part. All our expedition are famous according made at the order of buyer and to his account, except contrary expressly formulated willing. It will belong buyer to make firm the goods sold from their exit of our factory and this until the date of transfer of property against all risks of damage of destruction or of responsibility caused or suffered by them. 5. CLAUSE OF SHARE OF PROPERTY According to the law 80-335 on May 12th 1980, the transfer of property of our products is suspended until entire payment of their price in principal and accessory same in case of concession of delay of payment. The application of this clause wouldn’t, in anyone case, to modify the application of conditions concerning the transfer of risks. Don’t constitute a payment the discount of bill accepted or other titles creating an obligation to pay. Buyer wills became proprietor at the moment of payment effectively credited at our bank, of the last maturity, with accessory cost. In consequence, in case of partial or total no-payment of price at the maturity for any cause whatever, our company could be required from full right and without formality the restitution of products sold at the cost, one’s own risk of buyer. 6. JURISDICTION ASSIGNING In case of contesting or litigation of any mature whatever, the trade tribunal of LE MANS will be only competent, same in case of appeal in guarantee or of plurality of defendant. The present sale general stipulation to apply oneself to all orders recorded by our company to the exclusion of all clause representing on the letters and bill of order from our customer except express and written acceptance by our care. Tel: +44 (0)191 490 1547 Fax: +44 (0)191 477 5371 Email: northernsales@thorneandderrick.co.uk Website: www.cablejoints.co.uk www.thorneanderrick.co.uk 57