The document discusses the design and installation of a green roof. It lists design objectives like sun, wind, temperature and rainfall that were considered. It also notes the climate is hot and windy. For the permanent succulent ground cover, various planting methods are listed like seeds, cuttings and plugs. Details are provided on irrigation systems using pumper trucks and drip lines. The green roof project installation is summarized as removing unused penetrations, using various insulation and waterproofing materials, and filling with a growing media mix of 20 cubic yards.

1. GREEN ROOFS
PLANTS, MEDIA & IRRIGATION

2. Design Objectives

5. • Sun
• Wind
• Temperature
• Rainfall
• Micro-climate
• Hot and windy
• Shade

11. Permanent Succulent
Ground Cover

15. Planting Methods
Seeds
Hydro seed
Cuttings
Plugs
Vegetated Mats
Pre Grown Modular

17. PUMPER TRUCKS

32. Horticultural Elements
Irrigation
MP Rotator

34. Horticultural Elements
Irrigation
Netafim Drip

48. Green Roof Project

50. 10,000 Pounds of Materials to Landfill 12 unused penetrations removed and capped

51. Foil Faced
1/2” Polystyrene
Foam Board

52. Hot air welded seams
Mechanically
fastened
Carlisle 60 mil
Sureweld TPO
Penetration
Flashing
Flood Tested

53. Carlisle CCW 200 HV Non Woven Polyester

54. Carlisle Miridrain GR 9200

55. 20 cubic yards
Mix
Pumice
Perlite
Compost
Coco fiber
Bat guano
Cotton seed meal
Green sand