The document is a resume for an electrical engineer seeking a managerial role in maintenance, planning and coordination. Some key points:
- The candidate has 2+ years experience in maintenance, planning and project management in the automobile industry, most recently at Hindustan Motors Ltd.
- Areas of expertise include preventative and breakdown maintenance, planning maintenance schedules, inventory management, and ensuring timely project completion.
- Relevant experience includes equipment installation and commissioning, maintenance of various machinery, and material management.
- The candidate holds a B.Tech. in Electrical Engineering and has training in finance, health and safety, and maintenance practices.
A Chartered Engineer with decade of experience in Mechanical Maintenance of Drilling Rig Equipment and Reactor Engineering Plant. Competent in Major Maintenance of Drilling Rigs (Onshore & Offshore) through Third Parties including OEMs. Competent in SAP (PM & MM), Windows 7 & 8 and MS Office 2010. Seeking immediate employment, available.
Dear Sir/Mam,
I am highly motivated mechanical engineer with a diploma in engineering and three years of practical on site experience in project and plant maintenance equipped with reliability tools like condition monitoring.
In my last position as an assistant Maintenance Engineer at JK Paper Fort Songarh, I am responsible for -
Planning and effecting preventive maintenance schedules of various machinery and instruments to increase machine up time / equipment reliability; thereby accomplishing planned production targets within budget.
Maintenance of Different Equipment Like Pumps, Gear boxes, Power transmission (shaft, couplings, belt), central oil Lubrication system, Screens,Roll etc & follow-up spare part list.
Utility Equipments: EOT cranes, Hydraulic tools & Systems etc.
Preparing & maintain CBM, TBM, Lubrication root chart, Daily observation report, Shut down job file, Daily job planning file, History Register, Monthly performance report.
A Chartered Engineer with decade of experience in Mechanical Maintenance of Drilling Rig Equipment and Reactor Engineering Plant. Competent in Major Maintenance of Drilling Rigs (Onshore & Offshore) through Third Parties including OEMs. Competent in SAP (PM & MM), Windows 7 & 8 and MS Office 2010. Seeking immediate employment, available.
Dear Sir/Mam,
I am highly motivated mechanical engineer with a diploma in engineering and three years of practical on site experience in project and plant maintenance equipped with reliability tools like condition monitoring.
In my last position as an assistant Maintenance Engineer at JK Paper Fort Songarh, I am responsible for -
Planning and effecting preventive maintenance schedules of various machinery and instruments to increase machine up time / equipment reliability; thereby accomplishing planned production targets within budget.
Maintenance of Different Equipment Like Pumps, Gear boxes, Power transmission (shaft, couplings, belt), central oil Lubrication system, Screens,Roll etc & follow-up spare part list.
Utility Equipments: EOT cranes, Hydraulic tools & Systems etc.
Preparing & maintain CBM, TBM, Lubrication root chart, Daily observation report, Shut down job file, Daily job planning file, History Register, Monthly performance report.
1. Seeking managerial assignments in Maintenance, Planning & Coordination with a reputed organization.
SYNOPSIS
• B.Tech. in Electrical Engineering with over 2 years of experience in Maintenance,
Planning & Coordination, Project Management in the Automobile industry.
• Lastly was associated with Hindustan Motors Ltd, Uttarpara, West Bengal as Engineer-Works
Engineering Department including Paint Shop maintenance and Welding Maintenance.
• Expertise in handling preventive & breakdown maintenance of rotary,static equipment and welding
equipment maintenance.
• Proficient in planning of preventive maintenance, spare inventory & scheduling of equipment’s availability
on site in good working condition.
• Talent for proactively identifying & resolving problems, ramping up project activities with on time
deliverables and maximizing productivity.
• Relevant exposure in shop floor manpower planning and inventory handling & control.
• Hands on experience in handling erection, commissioning of equipment to ensure the completion of project
within stipulated time /cost parameters
• Effective communicator with management skills & strong analytical, problem solving & organizational
abilities.
• Relevant exposure in heat treatment plant, plc-controlled furnace(WESMAN) and pneumatic machines.
• Team player with strong communication, inter-personal and analytical skills; possess a flexible & detail
oriented attitude.
CAREER CONTOUR
From Jun’12 to July’14 with Hindustan Motors Ltd.,Uttarpara, West Bengal
as Engineer-WED (including Paint Shop Maintenance).
Currently looking for job and preparing for Govt jobs examinations.
KEY ACCOUNTABILITIES
Project Management
• Spearheading project activities of Assembly Plant and working out various requirements & monitoring
overall project operations for ensuring timely completion.
• Coordinating projects for the set up standards with accountability for strategic utilization & deployment
of available resources to achieve organizational objectives.
• Checking and review of project related static and rotary equipment drawings and correspondence with
the respective vendor.
• Installing and commissioning of equipment, followed by plant trial runs meeting targeted performance/
quality & quantity parameters.
• Developing & implementing different checklists and punch points for erection and commissioning of
Static & Rotary equipment and for fabrication & erection of piping.
KISHOR PAL
Contact No.: +91-8444960151/+91-8902262361
E-Mail: kishorpal26@gmail.com / kishor.pal@hotmail.com
2. Maintenance
• Planning and effecting predictive & preventive maintenance schedules of various machinery including
rotary and static equipment to increase machine availability and equipment reliability.
• Supervising maintenance target within the allocated budgets to ensure obstacle from manufacturing.
• Identifying areas of obstruction / breakdowns and taking steps to rectify the equipment through
application of troubleshooting in Assembly shop; preparing SMPs (standard maintenance procedure) for
different kinds of equipment like centrifugal pumps, reciprocating compressors, Exhaust Fans etc.
• Prepares detailed overhaul report / failure analysis report with necessary recommendations and
observations and executing corrective maintenance.
• Overseeing the maintenance, project related activities & troubleshooting in Assembly Plant.
Planning & Coordination / Spare Management
• Looking after spare management & optimizing spares utilization by scheduling maintenance activities.
• Planning, preparing and scheduling specific modular or major turnarounds maintenance activities;
following-up with operations personnel for coordination of maintenance works prior to scheduling and
controlling backlog work.
• Ensuring proper follow-up on the schedule maintenance by visits to assigned areas to ensure work
progresses according to planned programs.
• Co-ordination with purchase dept. for new parts/equipment purchase for smooth maintenance and project
work (quotation, requisition etc.).
Material Management
• Planning, inventory management and updating the spares list for the availability of spares when
required.
• Looking after vendor development for spares procurement & project work.
• Testing the material inspection & testing to ensure that they are precise, accurate, reproducible, "full-
proof" and specific to the product.
• Implemented 5’S in the spare store room and shopfloor.
Accomplishments :
• Have successfully trained worker on mig machine control card repairing job. For a very less price
compared to third pary repairing which cost about Rs 2500/- for each card.
• Executed cost saving techniques / measures and modifications to achieve substantial reduction in O&M
expenditures and work within the budget.
• Trained compressor operator for compressed air quality improvement by following simple steps.
• Trained pump operator on power savings procedure.
• Accomplished single handedly the project on installation of 200 cfm(50 H.P motor) air cooled
compressor in place of 1000 cfm(1000 H.P) oiled cooled compressor for power saving.
Equipment Purview
• Pumps: Centrifugal Pumps (Single stage), Reciprocating Pump (make- VR Coatings) etc.
• Pneumatic equipment: Jig and fixture, pneumatic cylinders (Festo)
• Hoists : Single & Twin Hoists (make- Swift) Capacity 1- 2 ton
• Conveyors: Floor and Overhead conveyor (make- HADEN JOSTS ENGINEERING INDIA LTD and
ALLROYD.)
3. • Compressors: Reciprocating (make –KGK, IR), capacity – 500 CFM & 1000 CFM
• Air Dryer : SUMMIT make automatic air dryer.
• Spot and Seam Welding Machines : NASH’s & PHILIPS’s make spot and Mach Lonic’s seam
welding machines
• MIG and ARC welding machines: NASH,PANASONIC,ADOR make mig and arc welding machines
Training Attented
• 3 day training on Finance for Non-finance Persons.
• Structured and scheduled trainings on Health, Safety and Environment
• 7 days Training attended on maintenance practices for SME’s.
• Training on 7 QC Tools, KAIZEN, 5’S.
Other Work Experiences
• Transformer testing, maintenance and look into the chemical condition of the insulating oil.
• Control Panel maintenance for different equipment.
• Have worked with reciprocating compressors (KGK AND IR).
• Exposure in cooling tower (3000TR) maintenance and revamping the tower for maintenance purpose.
• Experienced in pump house maintenance ,reciprocating pump ,hot well pump maintenance
• Experienced in softener tank repairing and water treatment processes.
• Have through knowledge in maintaining grease guns.
• Maintaining the hydraulic press machine at our front and rear axle assembly plant.
• Maintaining the GE make 100 HP motor generator set for high frequency generator.
• Maintaining the BTA line, Carline and Final View conveyor lines of different ratings and different speed
controller.
• Responsible for preventive maintenance of the assembly plant equipments (Overhead plug in box of 400
Amps, Distribution systems of that plant, pneumatic equipments of Festo and Janatics, water supply system
for bodyshop spot welding guns etc ).
• Have through knowledge in MIG welding machines .Preparing the preventive maintenance schedule of
these machines.
• Maintained assembly plant’s hoist of different rating.
• Maintained Belt drive and chain drive equipments of the plant.
ACADEMIC CREDENTIALS
2012 B.Tech. (Electrical Engineering) from Kalyani Government Engineering College with 8.43 CGPA .
2007 12th
from Rajnagar Union High School , WBCHSE, with 80% .
2005 10th
from Rajnagar Union High School , WBBSE, with 83.12% .
Software Skills : Well versed with 1. MATLAB
2.Ms-Office
3. PSPICE,
4. TRAININGS ATTENDED DURING B.TECH
Successfully completed summer training on Railway’s Electrical Systems including Trains from Eastern
Railways Sealdah Division
Undergone vocational training from Durgapur Project Limited in generation and distribution of electric
energy.
PERSONAL VITAE
Date of Birth : 26th
August, 1988
Address : Vill-Suratpur, P.O-Harirampur, P.St-Daspur (Paschim Medinipur) Pin-721211,
West Bengal
Languages Known : English (read,write ,speak), Hindi(speak) and Bengali(read ,write ,speak)
HOBBIES
• Playing cricket, badminton.
• Playing mobiles games.
• Listening to music.
DECLARATION
I hereby declare that the information furnished above is true to the best of my knowledge.
Place: Daspur Kishor Pal