1. Muhammad Sajid
Address:
Flate # A-5,
Alliance Paradise, Phase-II
(LS-12), Sector 11-C/1,
North Karachi,
Karachi, Pakistan.
(+92)-333-2210576
sajidsb@hotmail.com
Objective: Challenging and rewarding Job in a growth-oriented organization, which
offers diverse job responsibilities and will fully utilize abilities.
Educational Background:
Bachelor of Technology (B.Tech.) in Mechanical Engineering with 3.27 CGPA from Dada Bhoy
Institute of Higher Education, Karachi, Pakistan in 2004.
D.A.E. with 2nd
Division from Pak Swiss Training Center, Karachi in 1997.
S.S.C. with 1st
Division from Govt. High School Sanghar in 1994.
Certifications, Skills & Visits:
Coating Inspection
“NACE Coating Inspector Level-I (CIP-I)” from NACE International, Dubai International
Academy City, Unit Arab Emirate (UAE).
Advance NDT Technique Certifications & Trainings
“Ultrasonic Testing (UT) Level-II in Phased Array Technique” according to ASNT-SNT-TC-1A
through A-Star Training & Consultancy (Pte) Ltd. Singapore. In August’ 2014.
“Ultrasonic Testing (UT) Level-II in TOFD Technique” according to ASNT-SNT-TC-1A through
ASNT Level-III from Peoples Steel Mills Limited, Karachi. In August’ 2012. (Re-certification on
March’2015)
“Training on Phased Array (PA) & Time of flight Diffraction (TOFD)” (02 weeks) from
Olympus Singapore PTE Ltd (SINGAPORE). In January- February 2012.
“Course on Phased Array (PA) & Time of flight Diffraction (TOFD)” (1 week) from National
Center for NDT, Islamabad. In Dec’2011.
Conventional NDT Level-II Certifications
“Ultrasonic Testing (UT) Level-II” according to ASNT-SNT-TC-1A through ASNT Level-III from
Peoples Steel Mills Limited, Karachi. In July’ 2009 (Last Re-certification on February ’2015)
“Radiographic Testing (RT) Level-II” according to ASNT-SNT-TC-1A through ASNT Level-III
from Entourage International, Islamabad. In June’ 2010 (Re-certification on June’2013 from
Peoples Steel Mills Limited, Karachi)
“Magnetic Particle Testing (MT) Level-II” according to ASNT-SNT-TC-1A through ASNT Level-
III from Entourage International, Islamabad. In June’ 2010 (Last Re-certification on February
’2015 from Peoples Steel Mills Limited, Karachi)
“Dye Penetrant Testing (PT) Level-II” according to ASNT-SNT-TC-1A through ASNT Level-III
from Entourage International, Islamabad. In Jan’ 2011.(Re-certification on February ’2014 from
1/6
2. Peoples Steel Mills Limited, Karachi)
NDT Level-I Certifications
"Radiographic Testing Level-I " with 3rd
position (92% marks) from "National Center for NDT
(NCNDT)", Islamabad. In Dec’ 2008.
Other NDT Trainings
“Ultrasonic Flaw Sizing Of Defects” (3 weeks) from National Center for NDT, Islamabad. In
2001.
Visits
SINGAPORE
A-Star Training & Consultancy (PTE) Ltd. - August’2014 (16 Days)
For Ultrasonic Testing Level-II in Phased Array Technique.
Olympus Singapore PTE Ltd. - Jan-Feb’2012 (21Days)
For Training of Advance Ultrasonic Testing Equipment (TOFD & PAUT) (Model #OMNI MX).
CHINA
Dan Dong Hua Ri Electric Co. Ltd. - May’2009 (06 Days)
For Inspection and Training of Radiographic Testing machine (Model # XXG-3005).
Other Training & Skills
Well use of MS Office
Well use of Internet
Well use of ERP
Awareness training of “ISO 9001:2000” from Peoples Steel Mills Limited, Karachi.
Training as “Internal Auditor of ISO 9001:2000” from Peoples Steel Mills Limited, Karachi.
Projects:
Project: Integrity Inspection of Solvent Naphtha Stripper & Top Dish End of Pre-Flash
Tower EPRF-I,
Client: ENAR Petroleum Refining Facility-I
Job description: Performed Thickness Measurement (UT), Dye Penetrant
Testing (PT), Hardness Testing
Project: Inspection of Pipe Fittings at EPRF-II,
Client: ENAR Petroleum Refining Facility-II
Job description: Performed and monitored Thickness Measurement (UT),
Radiographic Testing (RT), Dye Penetrant Testing (PT), Position Material
Identification (PMI) and metallography
Project: Fabrication of columns & pressure vessels, of EPRF-II project
2/6
3. Client: ENAR Petroleum Refining Facility-II, Enar Petrotech Services.
Job description: Performed Ultrasonic Test (UT), Radiographic Testing (RT), Magnetic Particle
Testing (MT), Dye Penetrant Testing (PT) and Thickness measurements..
Project: Fabrication & Installation of Electric Arc Furnace & Ladle,
under ground diesel & kerosene storage tanks
Client: PSM in-house project
Job description: Performed Ultrasonic Test (UT), Radiographic Testing (RT), Magnetic Particle
Testing (MT), Dye Penetrant Testing (PT) and Thickness measurements.
Project: Construction of Petroleum products storage tanks (capacity 12500 bbl) at
EPRFII, Karachi.
Client: Enar Employees Trust/Enar Petrotech Services
Job description: Performed Ultrasonic Test (UT) & Radiographic Testing (RT),
Project: Fabrication of penstock with accessories
Client: Hydrotech power/WAPDA Hydro Power
Job description: Performed Radiographic Testing (RT),
Project: Maintenance of Stablizer drill bit
Client: Weather ford Pakistan
Job description: Performed Ultrasonic testing (UT).
Project: Life assessment of LGO Hydrotreator Reactors, Naphtha Hydrotreator and
Plate forming Reactors
Client: Byco Oil Pakistan Limited
Job description: Performed Ultrasonic testing (UT).WFMPI, DPT
Project: TURNAROUND ACTIVITIES 2011
Client: ENI Pakistan (Bhit Gas Field)
Job description: Performed Ultrasonic testing (UT).WFMPI, DPT
Project: Construction of Storage Tank
Client: ENI Pakistan (Bhit Gas Field)
Job description: Performed Ultrasonic testing (UT) of base plates
Project: Construction of Loop lines
Client: ENI Pakistan (Bhit Gas Field)
Job description: Performed Ultrasonic testing (UT) of loop lines
3/6
4. Project: Installation of Compressor at Qadir Pur gas plant
Client: Oil & Gas Development Corporation (OGDCL)
Job description: Performed Radiographic Testing (RT),
Project: Steel Plant Fabrication
Client: Aaisa Steel
Job description: Performed Radiographic Testing (RT), Ultrasonic testing (UT)
Project: Maintenance of Hrbour Mobile Crane
Client: Karachi Port Trust (KPT)
Job description: Performed Ultrasonic Testing
Professional Experience:
(March-1998 to Till date- 16 years)
Full Time Job
Feb 2000 – Continue Peoples Steel Mills Limited. Manghopir, KHI
• Working as Assistant Manger (Incharge NDT Section) in Quality Assurance and
Development.
Current Responsibilities
(1.) Incharge NDT section
• Communicate NDT results to other sections & customers/ Clients
• Manage & monitor Project activities at client sites.
• Correspondence with suppliers & customers
• Arrange NDT consumables and Accessories.
• Establish Procedures and work guide lines.
• Make technical / commercial documents for bids.
• Coordinate with regularities bodies Like PNRA (Pakistan Nuclear Regulatory Authority).
• Manage manpower according to work load.
• Maintain the documentation of the section as per ISO-9001: 2008 requirements
(a) Radiographic Testing (RT)
• Perform and monitor Radiographic Testing (RT) on Pressure Vessels, columns,
welded Plates & Pipe lines.
• Well use of x-ray machines and gamma ray Source (Ir-192).
• Working on directional and panoramic x-ray machines. (300Kv &160Kv)
• Well know how about Radiographic Technique & development of films.
• Well Know how of different International Standards for Radiographic Testing such
as ASME Boiler & Pressure Vessel Code, API, ASTM Standards.
(b) Ultrasonic Testing (UT)
• Perform and monitor ultrasonic Testing (UT) on Pressure Vessels, columns, welded
Plates, Pipes, Rolled, Forged, and Cast Products.
• Well use of ultrasonic flow detector model No USM25S & USM 35 x (GE-Germany) ,
TUD 201 (Time Corporation-China) .Epoch LT (Olympus-USA).
• Use of Advance ultrasonic testing equipments for Time of Flight Diffraction (TOFD)
and Phased Array (PA) (omni MX & Omni MX2)
4/6
5. • Measurements of thickness through thickness gauge TI-CMXDL (CHECK-LINE,
USA). DMS 4 (Make GE-Germany) & T-Gage IV (Sonatest, England)
• Well use of ultrasonic editing / evaluation software’s (Ultra doc, Omni PC,Tomoview
2.10 R19)
• Well Know how of different International Standards for UT (ASME Pressure Vessel
Code, ASTM & API Standards).
(c) Magnetic Particle Testing (MT)
• Perform and monitor Magnetic Practical Testing (MT) on Rolled, Forged Cast
product, Pipe Line and Welds.
• Well Use of bench type MPT machines Model No. BCD-3000 (Make Johnson &
Allien, England).
• Well use of AC yoke, DC yoke, permanent Magnate.
• Well know how of different International Standards for MT such as ASTM. ASME
(d) Dye Penetrant Testing (PT)
• Perform and monitor Dye Penetrant Testing (PT) on Castings, Pipe lines, welding
and Forged, Rolled and Machined product.
• Perform both type (Visible and Florescent) Dye Panetrant.
• Well know how of different International Standards for PT.
(e) Positive Material Identification (PMI)
• Perform MPI through portable XRF analyzer (Alpha series-Innov-x system).
(f) Portable Hardness Testing
• Perform Hardness testing through portable hardness tester.(HT-1000A, G & R
Technology, USA)
Full Time Job
March 1998 to feb 2000 Transmission Engineering Industries Limited. Hub Blochistan
Worked as a Quality Control Supervisor.
Responsibilities were:
• Performed online inspection.
• Performed final inspection.
• Development and design the route of new product.
• Performed calibration of measuring instruments.
Personal Details:
Date of Birth: 15th
March 1979.
Father’s Name: Maqbool Ahmed.
N.I.C. #: 44206-2372602-1
Passport # BF5576022
Marital Status Married
Reference:
References will be furnished on demand.
5/6
