MJLM Engineering & Technical Services is a minority-owned small disadvantaged business that provides engineering, technical, and logistics services. It has around 60 employees including former government and military personnel. MJLM has expertise in areas like test, measurement, and diagnostic equipment support, weapons system maintenance, and calibration equipment refurbishment. It supports various government organizations and programs.
MJLM is a minority-owned small business providing engineering and technical services including logistics support, system design and development, software development, and quality assurance. It has over 100 employees located across several US locations supporting various government programs. In 2012, MJLM's revenue was $9.783 million.
MJLM is an engineering and technical services company that provides support to various military programs. It has expertise in areas like electronics prototyping, printed circuit board fabrication, test equipment maintenance, and engineering design. MJLM has supported programs involving aircraft engine testing, missile defense systems, and weapons platforms. It maintains certifications in quality management and security standards.
This resume summarizes Cheah Yaw Wah's qualifications and work experience. He received a Bachelor's degree in Electrical and Electronics Engineering from the University of Lincoln in the UK and has over 15 years of experience in product testing and engineering roles. His most recent role is as a Senior Product and Test Engineer at Lumileds Malaysia, where he is responsible for supporting automotive product testing and reliability testing. Previously he worked as a Staff Engineer at Renesas Semiconductor, where he improved testing efficiency and yield.
Vishal Dhawan has over 5 years of experience in oil and gas industry as a field electronic technician. He is responsible for providing electronic support and ensuring proper performance of equipment for fracturing, coil tubing, cementing and nitrogen operations. He has experience programming, testing, installing, repairing and troubleshooting various electromechanical and computer-based equipment. He also has experience in project management, cost control, instrumentation, and team management from previous roles in oil and gas exploration companies. He holds a B.Tech in Electronics and Instrumentation and MBA in Operations Management.
Klinton Williams has over 30 years of experience in telecommunications including managing switching systems and wireless networks. He has expertise in optical networks, DWDM systems, wireless infrastructure, and test equipment. Currently he works as a senior engineer for Coriant in Australia, overseeing fiber optic network deployments and customer support.
Amr Mohamed has over 12 years of experience working in electricity utilities in Dubai and Egypt. He currently works as an Engineer in Transmission Operation Planning at DEWA, where his responsibilities include daily load forecasting, unit commitment scheduling, transmission outage planning, and interconnection coordination. Previously, he worked for 5 years as a Load Dispatcher Engineer at the National Control Centre in Egypt, where he monitored the transmission system and dispatched generation units. He holds a B.Sc. in Electric Power Engineering from Helwan University in Egypt.
Arif is seeking a new role as a Principal or Staff Engineer, or Engineering Manager with opportunities for career growth. He has over 11 years of experience in hardware engineering roles at Honeywell Aerospace and Motorola. His expertise includes electronics, programming, manufacturing processes, and project management. He is skilled in troubleshooting, failure analysis, and people management.
MJLM Engineering & Technical Services is a minority-owned small disadvantaged business that provides engineering, technical, and logistics services. It has around 60 employees including former government and military personnel. MJLM has expertise in areas like test, measurement, and diagnostic equipment support, weapons system maintenance, and calibration equipment refurbishment. It supports various government organizations and programs.
MJLM is a minority-owned small business providing engineering and technical services including logistics support, system design and development, software development, and quality assurance. It has over 100 employees located across several US locations supporting various government programs. In 2012, MJLM's revenue was $9.783 million.
MJLM is an engineering and technical services company that provides support to various military programs. It has expertise in areas like electronics prototyping, printed circuit board fabrication, test equipment maintenance, and engineering design. MJLM has supported programs involving aircraft engine testing, missile defense systems, and weapons platforms. It maintains certifications in quality management and security standards.
This resume summarizes Cheah Yaw Wah's qualifications and work experience. He received a Bachelor's degree in Electrical and Electronics Engineering from the University of Lincoln in the UK and has over 15 years of experience in product testing and engineering roles. His most recent role is as a Senior Product and Test Engineer at Lumileds Malaysia, where he is responsible for supporting automotive product testing and reliability testing. Previously he worked as a Staff Engineer at Renesas Semiconductor, where he improved testing efficiency and yield.
Vishal Dhawan has over 5 years of experience in oil and gas industry as a field electronic technician. He is responsible for providing electronic support and ensuring proper performance of equipment for fracturing, coil tubing, cementing and nitrogen operations. He has experience programming, testing, installing, repairing and troubleshooting various electromechanical and computer-based equipment. He also has experience in project management, cost control, instrumentation, and team management from previous roles in oil and gas exploration companies. He holds a B.Tech in Electronics and Instrumentation and MBA in Operations Management.
Klinton Williams has over 30 years of experience in telecommunications including managing switching systems and wireless networks. He has expertise in optical networks, DWDM systems, wireless infrastructure, and test equipment. Currently he works as a senior engineer for Coriant in Australia, overseeing fiber optic network deployments and customer support.
Amr Mohamed has over 12 years of experience working in electricity utilities in Dubai and Egypt. He currently works as an Engineer in Transmission Operation Planning at DEWA, where his responsibilities include daily load forecasting, unit commitment scheduling, transmission outage planning, and interconnection coordination. Previously, he worked for 5 years as a Load Dispatcher Engineer at the National Control Centre in Egypt, where he monitored the transmission system and dispatched generation units. He holds a B.Sc. in Electric Power Engineering from Helwan University in Egypt.
Arif is seeking a new role as a Principal or Staff Engineer, or Engineering Manager with opportunities for career growth. He has over 11 years of experience in hardware engineering roles at Honeywell Aerospace and Motorola. His expertise includes electronics, programming, manufacturing processes, and project management. He is skilled in troubleshooting, failure analysis, and people management.
Improving continuous process operation using data analytics delta v applicati...Emerson Exchange
The document discusses applying data analytics to improve continuous process operation. It describes developing models using process data to enable online fault detection and quality parameter prediction. A field trial was conducted on a CO2 recovery process that uses a 2-stage flash skid. The data analytics models allow operators to more quickly respond to conditions impacting process operation and quality.
Khubaib Khan is an instrumentation engineer with over 10 years of experience working in fertilizer and power plants. He has expertise in DCS/PLC systems including Yokogawa Centum CS 3000 and GE Fanuc Rx3i PLC. Khan is currently an instrumentation area engineer responsible for maintenance, troubleshooting, and projects involving gas turbines, HRSGs, nitric acid plants, and CDM projects. He has received awards for his maintenance excellence and safety initiatives.
This is a recording of a workshop given at Emerson Exchange 2010. In the workshop information is provided on how MPC may be used to replace PID control to address difficult dynamics
Donald Huffer is seeking an engineering position involving RF electronics. He has over 30 years of experience in electrical engineering, specifically in RF/microwave test, antenna design and development, and project management of complex space systems. As an IPT lead on GPS programs, he supported antenna design, testing, and production. He also managed antenna farm development and testing. Huffer has experience managing suppliers and overseeing manufacturing of passive microwave components.
Michael K Bartosewcz is seeking a leadership position as a Senior Systems EO/IR Engineer and/or Program Manager on an EO/IR space flight hardware/software/algorithm program. He has significant experience in systems engineering and program management for C4ISR systems including SBIRS High, ABL, IKONOS, U-2 Multispectral Camera, and more. He has expertise in requirements analysis, system architecture analysis, interface definition, mission analysis, certification as a Thermal Vacuum/Vibration Test Engineer, and program/project management. He has a BS in Electrical Engineering from the University of Vermont and an MS in Physics from the University of Vermont.
Gregory Sandor is an electrical engineer with over 17 years of experience in RF, microwave, and mixed signal design for applications in aerospace, defense, oil & energy, and electronics industries. He has led engineering teams and multi-disciplinary projects involving design, integration, testing and field support of RF systems and components from DC to mmW frequencies. His background includes positions with Baker Hughes, Lockheed Martin, CHANG Industry, Space Vector, and Talon Instruments with a focus on design, test and integration of RF/MW printed circuit boards, modules, and subsystems.
This document summarizes Derek Stork's presentation on technical challenges for the DEMO stage of magnetic fusion energy development. Stork divides the DEMO program into three areas: a baseline program to realize the first DEMO machine, an optimization program to improve economics and reliability, and a strategic risk reduction program. For the baseline program, key challenges include qualifying structural materials to high radiation levels, developing a divertor to handle high heat fluxes, and finalizing blanket and tritium breeding concepts. Significant testing is still needed on materials from facilities like IFMIF before the DEMO design can be completed.
This document contains a resume for Jay D. Arances, who is seeking a position corresponding to his interests and qualifications. He has over 10 years of experience in electromechanical engineering roles, including project engineering, electrical engineering, and technical support positions. His areas of expertise include PLC programming, HVAC design, AutoCAD, Revit, and working with systems such as aerobridges, ground power units, and HVAC. He is proficient in English and holds engineering and technology-related educational qualifications from universities in the Philippines.
This document is a resume for Sardar Kashif Shahzad. It summarizes his work experience, education, skills, and objectives. He currently works as an RF Engineer for Netkom Communications Pakistan, where he performs various tasks related to 3G and 2G network optimization and benchmarking. Previously he worked as an RF Network Engineer and Field Engineer for Netkom and Siemens Engineering respectively. He has a Bachelor's degree in Electronics Engineering from the University of Engineering and Technology Peshawar. His skills include experience with various RF testing tools and software. His objective is to find a challenging position where he can continue learning and developing his capabilities.
This document provides a summary of Sanjit Samal's career experience and qualifications. It outlines his current role as a Senior Reliability Engineer at Saudi Arabian Fertilizer Company (SAFCO), where he leads reliability improvement projects and asset performance management methodologies. It also details his past experience in reliability engineering, maintenance, and project management roles in India and the Middle East. His technical skills and competencies include reliability system management, maintenance strategy development, and team management.
Carolann Seavers is a British Railway Signalling Design Engineer with over 30 years of experience in the industry. She has worked on numerous major projects for several companies, including Atkins, Volker Rail Signalling, Westinghouse Signals, and British Rail. Her experience includes location design, correlation, testing and commissioning, and she is proficient in Microstation and Microsoft Office software.
Phillip Crawford is seeking a position in maintenance electronics/mechanical in the oilfield services industry, leveraging over 10 years of experience. He has extensive experience maintaining and repairing various oilfield equipment, including cementing, coiled tubing, nitrogen, and acidizing units. Crawford also has a background in developing safety programs, overseeing technicians, and training employees. He holds various technical certifications and a Bachelor's degree in Electronic Technology.
Qualifying a high performance memory subsysten for Functional SafetyPankaj Singh
Addressing the Challenges of Safety verification for LPDDR4.
✓Avoid traditional approach of starting functional safety after functional verification : Iterative and expensive development phase
1. Functional Safety Need to be Architected and not added later.
2. Safety Analysis must start prior to implementation. ‘Design for safety/verification’
3. Reuse & Synergize : Nominal and Functional Safety Verification.
✓Fault optimization with formal and other techniques is necessary to overcome challenges with scaling simulation and analysis.
✓Integrated push button fault simulation flow is need of hour and saves verification engineers time.
✓Analog defect modelling and coverage can be performed based on IEEE P2427.
The document outlines the vision, policies, and operations of Delta Telecom. The vision is to be recognized as an advanced telecommunications service and solution provider and preferred strategic partner internationally. The main policy is to conduct operations according to high business ethics, environmental awareness, and compliance with local laws. Delta provides telecom network deployment, support, and maintenance services for vendors and operators. It aims to assist GSM operators in integrating new technologies efficiently.
Vinit Kumar has over 7 years of experience in telecom operations and maintenance. He currently works as a Senior Charging System Support Engineer for Ericsson in Ghana, providing tier 1 support for charging system 5.0 nodes. Previously he has worked for Ericsson in India and Giesecke & Devrient in India, supporting various telecom nodes. He is experienced in protocols like Diameter, INAP and technologies like Oracle Solaris, Linux and databases like Oracle. He has technical skills in areas like scripting, networking, hardware and aims to further develop his skills in new technologies.
Rizal Efendi is seeking an Automation Engineer position and has over 10 years of experience in automation control systems including programming PLCs, HMI, microcontrollers, and designing electrical diagrams. He has worked on various automation projects for companies in industries like mining, food production, and transportation. His skills include programming PLCs and microcontrollers from manufacturers like Omron, Schneider, and Siemens. He is proficient in English and CAD software like AutoCAD and SolidWorks.
Rada Elias Alamat is a Jordanian electronics engineer and technical manager seeking a new position. He has 19 years of experience managing teams of engineers and technicians in the Royal Jordanian Airforce. He has a bachelor's degree in electronics engineering and computer science from Mankato State University. His career has included roles as an instructor, radar maintenance manager, supply officer, and technical director for a security company. He is proficient in radar systems, computer networking, and project management.
Sesam is a 40-year old complete system for assessing the strength of fixed offshore structures. It provides efficient modeling, analysis, code checking, and redesign capabilities. Key features include parametric modeling, automatic load definitions from equipment, hydrodynamic analysis, pile-soil interaction modeling, beam and plate code checking, fatigue analysis, and fast updating of models and results. The system aims to save engineering time through its integrated workflow and design loop capabilities.
IGARSS 2011 - RCM, The Making of (AC) (Short).pptgrssieee
The document summarizes the RADARSAT Constellation Mission (RCM) which consists of three small SAR satellites to support operational requirements of the Canadian government. Key points are that it provides improved coverage over RADARSAT-1/2 with a responsive ground segment. The design parameters were driven by continuity of C-band SAR data, improved revisit rates, and a more cost efficient and reliable small satellite design. The project involves phases for definition, implementation, and commissioning, with MDA Systems as the prime contractor and support from Canadian industry.
The document discusses ERTMSFormalSpecs (EFS), a domain specific language for formalizing ERTMS specifications. EFS aims to model 100% of the ERTMS business logic through requirements analysis, modeling, testing, and visualization. It addresses issues with the natural language ERTMS specifications such as structure, size, completeness and consistency. EFS models requirements as formal representations to assess specifications, enable animation and testing. It integrates with other tools for scenario editing, visualization and comparing outputs to production onboard units. EFS helps analyze proposed changes to specifications and reduce interpretation issues.
Vala jyotsna presantation tom jones paper 2valajyotsna
This document summarizes the character of Tom Jones from Henry Fielding's novel. It notes that Tom grows up to be a handsome and brave young man who has affairs with many women but truly loves Sophia Western. Tom is the illegitimate son of Bridget Allworthy and is raised by the generous man Mr. Allworthy, who often fails to see the faults in others. The document analyzes Tom as a "new kind of hero, the unheroic hero" who is honest, brave, and generous but also extremely weak.
The document summarizes the Gandhian thoughts presented in the novel Kanthapura. It discusses how the novel centers around Gandhi and his followers in an Indian village before independence. It outlines some of Gandhi's key philosophies that were promoted, such as swadeshi, khaddar, eradicating untouchability and social evils, and stressing truth and non-violence. The character Moorthy is presented as channeling Gandhi's thoughts and becoming a leader whom the villagers follow.
Improving continuous process operation using data analytics delta v applicati...Emerson Exchange
The document discusses applying data analytics to improve continuous process operation. It describes developing models using process data to enable online fault detection and quality parameter prediction. A field trial was conducted on a CO2 recovery process that uses a 2-stage flash skid. The data analytics models allow operators to more quickly respond to conditions impacting process operation and quality.
Khubaib Khan is an instrumentation engineer with over 10 years of experience working in fertilizer and power plants. He has expertise in DCS/PLC systems including Yokogawa Centum CS 3000 and GE Fanuc Rx3i PLC. Khan is currently an instrumentation area engineer responsible for maintenance, troubleshooting, and projects involving gas turbines, HRSGs, nitric acid plants, and CDM projects. He has received awards for his maintenance excellence and safety initiatives.
This is a recording of a workshop given at Emerson Exchange 2010. In the workshop information is provided on how MPC may be used to replace PID control to address difficult dynamics
Donald Huffer is seeking an engineering position involving RF electronics. He has over 30 years of experience in electrical engineering, specifically in RF/microwave test, antenna design and development, and project management of complex space systems. As an IPT lead on GPS programs, he supported antenna design, testing, and production. He also managed antenna farm development and testing. Huffer has experience managing suppliers and overseeing manufacturing of passive microwave components.
Michael K Bartosewcz is seeking a leadership position as a Senior Systems EO/IR Engineer and/or Program Manager on an EO/IR space flight hardware/software/algorithm program. He has significant experience in systems engineering and program management for C4ISR systems including SBIRS High, ABL, IKONOS, U-2 Multispectral Camera, and more. He has expertise in requirements analysis, system architecture analysis, interface definition, mission analysis, certification as a Thermal Vacuum/Vibration Test Engineer, and program/project management. He has a BS in Electrical Engineering from the University of Vermont and an MS in Physics from the University of Vermont.
Gregory Sandor is an electrical engineer with over 17 years of experience in RF, microwave, and mixed signal design for applications in aerospace, defense, oil & energy, and electronics industries. He has led engineering teams and multi-disciplinary projects involving design, integration, testing and field support of RF systems and components from DC to mmW frequencies. His background includes positions with Baker Hughes, Lockheed Martin, CHANG Industry, Space Vector, and Talon Instruments with a focus on design, test and integration of RF/MW printed circuit boards, modules, and subsystems.
This document summarizes Derek Stork's presentation on technical challenges for the DEMO stage of magnetic fusion energy development. Stork divides the DEMO program into three areas: a baseline program to realize the first DEMO machine, an optimization program to improve economics and reliability, and a strategic risk reduction program. For the baseline program, key challenges include qualifying structural materials to high radiation levels, developing a divertor to handle high heat fluxes, and finalizing blanket and tritium breeding concepts. Significant testing is still needed on materials from facilities like IFMIF before the DEMO design can be completed.
This document contains a resume for Jay D. Arances, who is seeking a position corresponding to his interests and qualifications. He has over 10 years of experience in electromechanical engineering roles, including project engineering, electrical engineering, and technical support positions. His areas of expertise include PLC programming, HVAC design, AutoCAD, Revit, and working with systems such as aerobridges, ground power units, and HVAC. He is proficient in English and holds engineering and technology-related educational qualifications from universities in the Philippines.
This document is a resume for Sardar Kashif Shahzad. It summarizes his work experience, education, skills, and objectives. He currently works as an RF Engineer for Netkom Communications Pakistan, where he performs various tasks related to 3G and 2G network optimization and benchmarking. Previously he worked as an RF Network Engineer and Field Engineer for Netkom and Siemens Engineering respectively. He has a Bachelor's degree in Electronics Engineering from the University of Engineering and Technology Peshawar. His skills include experience with various RF testing tools and software. His objective is to find a challenging position where he can continue learning and developing his capabilities.
This document provides a summary of Sanjit Samal's career experience and qualifications. It outlines his current role as a Senior Reliability Engineer at Saudi Arabian Fertilizer Company (SAFCO), where he leads reliability improvement projects and asset performance management methodologies. It also details his past experience in reliability engineering, maintenance, and project management roles in India and the Middle East. His technical skills and competencies include reliability system management, maintenance strategy development, and team management.
Carolann Seavers is a British Railway Signalling Design Engineer with over 30 years of experience in the industry. She has worked on numerous major projects for several companies, including Atkins, Volker Rail Signalling, Westinghouse Signals, and British Rail. Her experience includes location design, correlation, testing and commissioning, and she is proficient in Microstation and Microsoft Office software.
Phillip Crawford is seeking a position in maintenance electronics/mechanical in the oilfield services industry, leveraging over 10 years of experience. He has extensive experience maintaining and repairing various oilfield equipment, including cementing, coiled tubing, nitrogen, and acidizing units. Crawford also has a background in developing safety programs, overseeing technicians, and training employees. He holds various technical certifications and a Bachelor's degree in Electronic Technology.
Qualifying a high performance memory subsysten for Functional SafetyPankaj Singh
Addressing the Challenges of Safety verification for LPDDR4.
✓Avoid traditional approach of starting functional safety after functional verification : Iterative and expensive development phase
1. Functional Safety Need to be Architected and not added later.
2. Safety Analysis must start prior to implementation. ‘Design for safety/verification’
3. Reuse & Synergize : Nominal and Functional Safety Verification.
✓Fault optimization with formal and other techniques is necessary to overcome challenges with scaling simulation and analysis.
✓Integrated push button fault simulation flow is need of hour and saves verification engineers time.
✓Analog defect modelling and coverage can be performed based on IEEE P2427.
The document outlines the vision, policies, and operations of Delta Telecom. The vision is to be recognized as an advanced telecommunications service and solution provider and preferred strategic partner internationally. The main policy is to conduct operations according to high business ethics, environmental awareness, and compliance with local laws. Delta provides telecom network deployment, support, and maintenance services for vendors and operators. It aims to assist GSM operators in integrating new technologies efficiently.
Vinit Kumar has over 7 years of experience in telecom operations and maintenance. He currently works as a Senior Charging System Support Engineer for Ericsson in Ghana, providing tier 1 support for charging system 5.0 nodes. Previously he has worked for Ericsson in India and Giesecke & Devrient in India, supporting various telecom nodes. He is experienced in protocols like Diameter, INAP and technologies like Oracle Solaris, Linux and databases like Oracle. He has technical skills in areas like scripting, networking, hardware and aims to further develop his skills in new technologies.
Rizal Efendi is seeking an Automation Engineer position and has over 10 years of experience in automation control systems including programming PLCs, HMI, microcontrollers, and designing electrical diagrams. He has worked on various automation projects for companies in industries like mining, food production, and transportation. His skills include programming PLCs and microcontrollers from manufacturers like Omron, Schneider, and Siemens. He is proficient in English and CAD software like AutoCAD and SolidWorks.
Rada Elias Alamat is a Jordanian electronics engineer and technical manager seeking a new position. He has 19 years of experience managing teams of engineers and technicians in the Royal Jordanian Airforce. He has a bachelor's degree in electronics engineering and computer science from Mankato State University. His career has included roles as an instructor, radar maintenance manager, supply officer, and technical director for a security company. He is proficient in radar systems, computer networking, and project management.
Sesam is a 40-year old complete system for assessing the strength of fixed offshore structures. It provides efficient modeling, analysis, code checking, and redesign capabilities. Key features include parametric modeling, automatic load definitions from equipment, hydrodynamic analysis, pile-soil interaction modeling, beam and plate code checking, fatigue analysis, and fast updating of models and results. The system aims to save engineering time through its integrated workflow and design loop capabilities.
IGARSS 2011 - RCM, The Making of (AC) (Short).pptgrssieee
The document summarizes the RADARSAT Constellation Mission (RCM) which consists of three small SAR satellites to support operational requirements of the Canadian government. Key points are that it provides improved coverage over RADARSAT-1/2 with a responsive ground segment. The design parameters were driven by continuity of C-band SAR data, improved revisit rates, and a more cost efficient and reliable small satellite design. The project involves phases for definition, implementation, and commissioning, with MDA Systems as the prime contractor and support from Canadian industry.
The document discusses ERTMSFormalSpecs (EFS), a domain specific language for formalizing ERTMS specifications. EFS aims to model 100% of the ERTMS business logic through requirements analysis, modeling, testing, and visualization. It addresses issues with the natural language ERTMS specifications such as structure, size, completeness and consistency. EFS models requirements as formal representations to assess specifications, enable animation and testing. It integrates with other tools for scenario editing, visualization and comparing outputs to production onboard units. EFS helps analyze proposed changes to specifications and reduce interpretation issues.
Vala jyotsna presantation tom jones paper 2valajyotsna
This document summarizes the character of Tom Jones from Henry Fielding's novel. It notes that Tom grows up to be a handsome and brave young man who has affairs with many women but truly loves Sophia Western. Tom is the illegitimate son of Bridget Allworthy and is raised by the generous man Mr. Allworthy, who often fails to see the faults in others. The document analyzes Tom as a "new kind of hero, the unheroic hero" who is honest, brave, and generous but also extremely weak.
The document summarizes the Gandhian thoughts presented in the novel Kanthapura. It discusses how the novel centers around Gandhi and his followers in an Indian village before independence. It outlines some of Gandhi's key philosophies that were promoted, such as swadeshi, khaddar, eradicating untouchability and social evils, and stressing truth and non-violence. The character Moorthy is presented as channeling Gandhi's thoughts and becoming a leader whom the villagers follow.
Paper 3 jyotsna presentatio literary theory and criticismvalajyotsna
This document discusses the three classical unities of drama - unity of time, place, and action. It provides details on each unity: unity of time implies that a play's action should not exceed 24 hours; unity of place means that the scene should not change locations often and exist within a single physical space; and unity of action means that a play should have a single plotline without mixing genres or including many subplots. The document serves to outline the three Aristotelian unities that were rules for drama derived from Aristotle's Poetics.
This document summarizes John Dryden's essay "An Essay of Dramatic Poesy" from 1667. In the essay, Dryden discusses the relative merits of ancient Greek and Latin drama, contemporary French neoclassical drama, and English drama from the time of Shakespeare. One of the characters in the essay, Eugenius, argues that modern drama is superior to ancient drama. The document provides background on Dryden and his essay, and was presented as part of a university course on literary theory and criticism.
This presentation is about Preface of Wordsworth. And in this presentation we can find that how Wordsworth has described about poet and poetry. And how nicely he has described that poetry is gives pleasure by simplicity and rustic lifestyle.
Wordsworth's preface to Lyrical Ballads outlines his poetic experiment of using simpler language focused on rural subjects and ordinary people. He argues poetry should be a spontaneous expression of emotion that avoids artificial conventions. The preface also discusses using the language of real people, though admits some editing was done, and explores how this collection was a departure from 18th century poetry.
William Wordsworth was primarily a poet, not a critic, but his views on poetry can be found in the preface to Lyrical Ballads from 1802. The preface introduced poems that were new in theme and style. Wordsworth asserts that the language of poetry is a selection from the real language of men, with no essential difference between prose and poetry. He emphasized writing in the ordinary language of people, not a crafted poetic language. The poems depict realistic characters in realistic situations with a strong narrative element.
This document is a preface by William Wordsworth for his book Lyrical Ballads. It provides context about Wordsworth and defines his views on poetry. Specifically, it notes that Wordsworth wrote Lyrical Ballads with Coleridge and defines poetry as a "spontaneous overflow of powerful feelings" that are "recollected in tranquility." It also discusses Wordsworth's beliefs that poetry should use simple language, focus on nature, present morality, and have no difference between the language of poetry and prose.
According to William Wordsworth poetry is the powerful overflow of spontaneous feelings. Wordsworth describes his main intention to write Lyrical Ballads is to choose incidents from real life and add a colour of imagination so that ordinary things may be represented in an unusual fashion.
The document discusses different types of characters commonly found in literature, including round, flat, dynamic, and static characters as well as stereotypes. Round characters have multiple traits and can change over time, while flat characters reveal only one or two traits and do not develop. Dynamic characters change and develop, whereas static characters remain the same. Stereotypical characters are generalized types that readers are familiar with from other stories. The document provides examples of characters and asks the reader to identify their type.
This document provides a summary of the novel "Kanthapura" by Raja Rao as a Gandhian epic. It discusses the main characters Moorthy and Ratna who were followers of Mahatma Gandhi and spread his ideas of truth, non-violence, satyagraha and peace in the village of Kanthapura. Moorthy is portrayed as the Gandhi of the village who reforms the social, religious and political background according to Gandhian principles. The use of the charkha and harikathas are also described as symbols that exalt Gandhi's ideas in the novel.
There are several types of characters found in stories. Round characters undergo changes throughout the story in response to conflict, while flat characters remain static. Stock characters rely on cultural stereotypes. The protagonist is the main character the audience empathizes with, while the antagonist directly opposes the protagonist. Examples are provided of each character type from stories like The Chronicles of Narnia, Tangled, and Superman.
The document is a resume for Andrew A. Kranak, an electronics technician with experience in troubleshooting, maintenance, and installation of various electronic and electromechanical systems. He has a background in the military working on computer, radar, and weapons systems. Currently he works as an RF test technician supporting testing of components for satellite communications.
Sherwin Falcon has over 13 years of experience in equipment maintenance and testing at Cypress Manufacturing Limited in the Philippines. He is currently responsible for maintaining all testers, performing preventive maintenance and calibrations. Previously, he set up and converted various test equipment, conducted repairs, and provided technical support to production. He has extensive training on multiple test systems and handlers.
MJLM is an engineering and technical services company that provides capabilities in engineering, sustainment, TMDE, logistics, and research and development. They have over a decade of experience supporting various military programs. Their core capabilities include system integration, prototype development, maintenance, repair, and test and evaluation services. They have a proven track record of providing innovative solutions and cost savings to government customers.
MJLM Engineering & Technical Services provides engineering, sustainment, TMDE, and logistics services to support various government programs. They have over 10 years of experience working with organizations such as AMCOM, DLA, PEO M&S, and PD TMDE. Their capabilities include system integration, prototype development, test and evaluation, and maintenance/repair. MJLM has a proven track record of providing innovative solutions and cost savings to their government customers.
Kumaran is an experienced electrical and electronics engineer seeking a position that utilizes his skills in maintenance, troubleshooting, and system commissioning. He has over 15 years of experience working on offshore oil rigs and power plants. His technical skills include PLC programming, drives systems, and troubleshooting complex control systems. He is knowledgeable about various automation vendors and has experience leading maintenance teams.
This document provides a curriculum vitae for G.D. Vijayakumar, an Instrument & Control System Engineer with over 9 years of experience in process automation projects. He has expertise in configuring and testing DCS systems from manufacturers like Yokogawa and Emerson. He provides details on his past work experience with SK Engineering & Construction and Onyo Engineering, where he led commissioning and start-up activities for oil, gas and petrochemical projects.
STS Characterization to Production TestHank Lydick
The document discusses bridging the gap between RF front-end module characterization and production testing. It describes how NI's semiconductor test system (STS) uses a common PXI hardware and software platform to allow characterization and production teams to use the same instrumentation and share test data, reducing time to market. The STS integrates RF and non-RF instruments into an enclosed test head and supports various wireless standards and RF measurements.
This resume summarizes Rohit Joshi's career experience and qualifications. He has over 5 years of experience as a Control and Instrumentation Engineer working with power plants and oil and gas refineries. Currently he works for Bharat Oman Refinery Limited maintaining their distributed control system, field instruments, analyzers, and other systems. He has a Bachelor's degree in Electronics and Instrumentation and skills in programming PLCs and DCS, along with maintenance and troubleshooting experience across various control systems and field devices.
Rajeev Soni has over 12 years of experience in instrumentation and automation engineering. He has a Bachelor's degree in Instrumentation and Control Engineering. He is currently a Manager of Instrumentation and Automation at Bokaro Steel Plant, where he leads a team and is responsible for various automation systems. Prior to this, he held other roles with increasing responsibilities at Bokaro Steel Plant in areas including a steel melting shop and continuous casting shop.
Installation & Commisioning References that ICT TELECOM achievedtolgagurleyen
This document provides summaries of various satellite communication projects completed between 2002-2012 by ICT, a Turkish satellite communications company. It lists earth station installations, antenna relocations, and technical services provided to customers such as Turksat and Digiturk. ICT's services include installation, testing, maintenance, repairs, training and 24/7 technical support. The company has expertise in various satellite communication technologies and manufacturers.
- T.P. Vasanth is seeking a career as a hardware engineer with 8 years of experience developing and testing various avionics systems.
- He has experience working onsite in France and has knowledge of product development lifecycles, schematic design, firmware development, testing, and integration.
- Currently he is working on the ARMDK-30 Tester for the SU-30 aircraft and has developed automated test systems and carrier boards.
Dilip Patel has over 25 years of experience as an electronic technician testing, troubleshooting, repairing, and modifying industrial automation equipment, power distribution systems, and computer systems. He is proficient in using test equipment to diagnose issues and has experience maintaining quality reports and inventory systems. Currently he works as a senior electronic test technician repairing Schneider Electric electrical power distribution and control panels.
This document outlines the education and experience of an instrumentation and control engineer. It details their educational background including an Instrumentation and Control Engineering Technology program degree from Lambton College as well as various training programs. It then outlines the applicant's skills and over 10 years of experience in instrumentation and control roles for various companies including Emerson, Siemens, Shanghai Automation Instrumentation, and Ontario Power Generation. Their most recent role is as a Process Control and Automation Specialist for Chemtura.
Viklesh Kumar Tripathi is seeking a position that utilizes his 2+ years of experience in instrumentation maintenance and industrial automation. He has a B.Tech in Electronics and Communication and additional training in DCS systems, PLCs, SCADA, and various protocols. His previous roles include maintenance engineer positions at power plants where he performed troubleshooting, maintenance visits, and resource planning. He has strengths in leadership, teamwork, problem-solving, and communication.
Apex Controls Specialists provides automation and control system design, programming, fabrication and testing for modular extrusion lines. They take a integrated approach using Ethernet communications between the PLC, drives, feeders and I/O to provide benefits like reduced wiring and easy diagnostics. Their software provides historical trending, SPC, recipe management and lot tracking to support quality production. Apex also offers wireless interfaces, modular software and interfaces for new modular plant designs.
For more information on GSE's tools for severe accident management and preparedness, go to GSES.com, email info@gses.com, and follow us on Twitter @GSESystems and Facebook.com/GSESystems. Thanks for viewing!
Wally H. Hudnall has over 25 years of experience in electronics maintenance and repair, primarily in oil and gas and military settings. He has worked as an electronics technician for various drilling contractors, most recently for Maersk Drilling, and has also held roles in technical support, training, and project management. Hudnall has extensive hands-on experience maintaining and troubleshooting control systems, drives, and instrumentation used in offshore drilling operations. He holds various technical certifications and trained at NOV as an instructor for several years.
The resume is for Warrel Ocampo Pendre, seeking an electronics and communications engineering role. He has over 15 years of experience in electronics repair, including expertise in mobile devices, fleet management systems, and Apple products. His professional strengths include knowledge of electronic systems, diagnostic equipment, and Microsoft Office applications. He holds a Bachelor's degree in Computer Engineering and has received several awards and certifications for his work.
Clay Vaz de Lima Jr is an electrical engineer with over 35 years of experience in industrial automation and control systems. He has extensive experience designing, implementing, and commissioning distributed control systems from manufacturers such as Yokogawa, ABB, Emerson, and Honeywell. His areas of expertise include functional design, control strategy development, commissioning management, and training. He is proficient in multiple control systems including DeltaV, Centum, Infi90, and Foxboro Evo. Currently he works as a senior application engineer providing technical support, training, and advanced control solutions to various industries.
Clay Vaz de Lima Jr is an electrical engineer with over 35 years of experience in industrial automation and control systems. He has extensive experience designing, implementing, and commissioning distributed control systems from manufacturers such as Yokogawa, ABB, Emerson, and Honeywell. His areas of expertise include functional design, control strategy development, commissioning management, and training. He is proficient in multiple control systems including DeltaV, Centum, Infi90, and Foxboro Evo. Currently he works as a senior application engineer providing technical support, training, and advanced control solutions to various industries.
Similar to MJLM Capabilities Briefing 2016 v1 (20)
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, Serbia
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMSIJNSA Journal
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELgerogepatton
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Generative AI leverages algorithms to create various forms of content
MJLM Capabilities Briefing 2016 v1
1. MJLM Engineering & Technical Services
4825 University Square, Suite 14
Huntsville, AL 35816
256-890-1800
hsvinfo@mjlm.com
MJLM E&TS Division
www.mjlmengineering.com
2. MJLM Engineering & Technical Services
• Small Disadvantaged Business (SDB) – Minority Owned
• Diversified workforce – ~60 Employees to include
former Government and Military Personnel
• DCAA & DCMA-approved Deltek CostPoint™
7.0 and Inventory Management System (IMS)
• ITAR, JCP, and ISO 9001:2008 Certified
• CMMI Level III Compliant
MAJOR MILESTONES
• 2003 – MJLM E&TS established in May
• 2007 – SAIC Mentor-Protégé program (former)
• 2011 – 1st Prime Contract (DLA-TEISP 8(a) – Expired 9/2014)
• 2011 – Graduated from the SBA 8(a) program in September
• 2011 – B&W Y-12 Mentor-Protégé program
Foundation…
MISSION:
To provide innovative
solutions in lifecycle
logistics, with a focus
on customer
satisfaction, quality,
and risk mitigation.
3. MJLM Engineering & Technical Services
Organization…
Executive Office
4825 University Square, Suite 14
Huntsville, AL 35816
4. MJLM Engineering & Technical Services
NAICS CODES:
332994 – Small Arms, Ordnance, & Ordnance Access. Manufacturing
334515 – Instrument Manufacturing Testing Electrical Signals
334418 – Printed Circuit Assembly (Electronic Assembly)
334419 – Other Electronic Component Manufacturing
541330 – Engineering Services (PRIMARY)
541380 – Testing Laboratories
541512 – Computer Systems Design Services
541614 – Process, Physical Distribution & Logistics Consulting
541712 – R&D in Physical, Engineering & Life Sciences
561910 – Packaging and Labeling Services
561210 – Facilities Support Services
Engineering Capabilities…
CORE COMPETENCIES:
• Maintenance, Sustainment, RESET
• TMDE Support
• System Integration, Prototype Development
• Cable Fabrication & Circuit Card Assembly
• Logistic Support
• ATE / TPS Development
• Computer-Aided Design (CAD)
Prime Contract Vehicles
• GSA Schedule PES
GS-10F-0117U
• GSA 8(a) STARS II
GS-06F-0875Z
• NGATS (Next Generation
Automated Test System)
W15QKN-13-D-0017
Subcontract Vehicles
• AMCOM Express – ALL Domains
• Information Technology Services – Small Business (ITS-SB)
• Missile Defense Agency Engineering & Support Services (MiDAESS)
• Systems Engineering and Technical Assistance 2010 (SETAC 10)
• Rapid Prototyping & Technology Initiative Generation Two (RPTI GEN2)
• TACOM OMNIBUS III
• TACOM S3 – Knowledge Base Services, Equipment Related Services
• Test Execution Services and Launch Augmentation (TESTLA) (SAIC)
6. MJLM Engineering & Technical Services
C-RAM is responsible for life cycle management of automated Air and
Missile Defense (AMD) Command and Control (C2) systems, including
the Forward Area Air Defense Command and Control (FAAD C2) and Air
and Missile Defense Planning and Control System (AMDPCS). C-RAM
also manages Indirect Fire Protection Capability (IFPC) System-of-
Systems (SoS) programs, to provide force protection against the
Indirect Fire (IDF) threat.
Counter-Rocket, Artillery, & Mortar
(C-RAM)
MJLM Liaison Officers (LNO) in OCONUS
Logistics Support for the Program Executive Office (PEO)
Missile & Space, Missile RESET Team
Item Management for Leave-Behind-Equipment (LBE)
Complete cleaning and inventory of ADAM Shelter
Provide all logistical coordination and documentation
required from Unit Hand-off thru delivery to Flightline for
shipment
Ensure assets are manifested and forwarded to
Tobyhanna Army Depot
MJLM PAST PERFORMANCE
7. MJLM Engineering & Technical Services
Test Equipment & Instrumentation
Support Program (TEISP)…
MISSION: Provide component-level repair and sustainment support to SSMD’s TEISP
PROGRAM SUPPORTS: IRTC – TEISP - W31P4Q-09-A-0016/TO-0006 [PoP ends: 9/2016 – Award Value: $45M]
MJLM PAST PERFORMANCE: Component-level repair of Test Equipment & Instrumentation, Circuit Card Repair, Electronic
Module Repair, Cable Fabrication, TPS Development, Climate Controlled Storage, Technical Publication Verification,
Inventory/GFE/GFF Management, and Packaging Handling and Shipping of US Army assets worldwide
CLASS IX – ITEMS REPAIRED
Oscilloscopes • Spectrum Analyzers • Signal Generators
Multi-meters • Electronic Gauges • Voltage Standards
Power Supplies • RF Power Amplifiers • Avionics
Government Savings of $5M+ (approx.)
PSD60 Fuel Quantity Test Set Repair
GPS Simulator Repair
AN/GRM122 & IFR4000 TPS Testing and
Repair using QMAX Automatic Tester
and Pin Point Tester (both GFE)
Obsolescence Mitigation of Air Force
Aircraft Instrumentation Test Set
CUSTOMER BENEFITS / MJLM PAST
PERFORMANCE
8. MJLM Engineering & Technical Services
Integrated Family of Test
Equipment (IFTE)
MJLM personnel use IFTE stations to test electronic and electro-
optic assemblies for fault isolation of Line Replaceable Units (LRU)
and Shop Replaceable Units (SRU) at all levels of maintenance.
These stations are reconfigurable to adapt to new weapons system
technology with short development time frames. The use of IFTE
test stations reduce maintenance and logistics costs.
• Base Shop Test Facility V3 (BSTF)
• Electro Optical Test Facility V5 (EOTF)
• Electronic Equipment Test Facility (EETF)
• Non-Destructive Test Equipment (NDTE)
• Commercial Equivalent Equipment (CEE)
• Electronic Repair Shelter (ERS)
• Support of Support (SOS) TPS Development
• Additional Test Program Sets (TPS) Development
System Sustainment
Management Directorate
(SSMD)
PAST PERFORMANCE
SUPPORTS
9. MJLM Engineering & Technical Services
IFTE – Low Voltage Digital Word
Generator (LV DWG)
Prototype Development
System Engineering - Redesign
Obsolescence Mitigation
Sustainment Support for IFTE
Reduce development timeframe
CUSTOMER BENEFITS / MJLM PAST PERFORMANCE
MJLM has supported the maintenance and sustainment of Integrated Family of Test Equipment (IFTE) stations since 2008.
The IFTE stations are reconfigurable to adapt to new weapons system technology used to test electronic and electro-optic
assemblies for fault isolation of Line Replaceable Units (LRU) and Shop Replaceable Units (SRU) at all maintenance levels.
COMPONENT MISSION: Low voltage digital testing of IFTE systems.
CUSTOMER OBJECTIVE: Reduce maintenance and life cycle logistics costs to the IFTE program.
MJLM SOLUTION: Redesign LV DWG configuration to eliminate proprietary and obsolescence issues.
CUSTOMER BENEFITS: Same functionality, Current technology components, Non-proprietary design,
Improves asset readiness, & Reduces risk to mission readiness.
Card InstallationDigital Bucket LV DWG Card
10. MJLM Engineering & Technical Services
Next Generation Automatic Test
System (NGATS)
MJLM was awarded a $75M firm-fixed-price, IDIQ multiple award
contract to support the NGATS program. The award will provide for
the Automated Test System Testing and Net-Centric support.
NGATS is the latest addition to Integrated Family of Test Equipment
(IFTE). NGATS is a reconfigurable, general-purpose, mobile,
deployable, Automatic Test System (ATS) designed to provide off-
platform sustainment support to all Army weapon systems. The
testing platform replaces the electro-optics and provides diagnostic
maintenance of Current and Future Force electronic systems and will
standardize the Army's Automatic Test Equipment (ATE).
• Base Shop Test Facility V3 (BSTF)
• Electro Optical Test Facility V5 (EOTF)
• Electronic Equipment Test Facility (EETF)
Product Director Test,
Measurement, & Diagnostic
Equipment (PD TMDE);
Redstone Arsenal
& Picatinny-ACC
MJLM PAST PERFORMANCE
SUPPORTS
11. MJLM Engineering & Technical Services
CUSTOMER BENEFITS / MJLM PAST PERFORMANCE
MISSION: Support Maintenance Units and Area-Support Organizations from brigade to multi-theater
sustainment operations
DESIGN: Calibration Instrumentation housed in fixed facilities or within tactical shelters with accompanying
power generation equipment to plug into Army Enterprise and Battle Networks
CAPABILITY: 100% Mobile Labs used to test, adjust, synchronize, repair, and verify the accuracy of 90% of the
Army’s TMDE workload across all measurement parameters
SUPPORT: Critical support to over 450,000 items of TMDE worldwide
RESET and/or Rebuild to Depot-Level (10/20) standards
CALSETS Repaired: AN/GSM 705 & AN/GSM 421
Pre-receipt field inventories of all systems
Fielding Support upon final delivery of systems
Calibration Sets Equipment
(CALSETS)...
12. MJLM Engineering & Technical Services
CUSTOMER BENEFITS / MJLM PAST PERFORMANCE
Test Van ERS RESET to 10/20 standards
Pre-receipt field inventories of all systems
Fielding support upon final delivery of systems
Electronic Repair Shelter (ERS)…
BEFORE
AFTER
MISSION: RESET & refurbishment of mobile lab assets to include the Electronic Optical Test Facility (EOTF) and
Base Shop Test Facility (BSTF)
DESIGN:
• EOTF – Tests and fault-isolates electro-optical and electronic Line Replaceable Units (LRUs) in a full range of
weapon systems. The station can be housed in an Army standard shelter, mounted on a five-ton truck
• BSTF – Automatic test set that replaces large, heavy, and immobile testers with a highly mobile, generic test
system utilizing advanced hardware, software, and system technologies for state of the art testing of digital,
hybrid, and RF electronics
CAPABILITY: 100% Mobile Labs used to test, adjust, synchronize, repair, and verify
13. MJLM Engineering & Technical Services
Close Combat Weapon System
(CCWS)
CUSTOMER BENEFITS / MJLM PAST PERFORMANCE
MISSION: Manages Target Acquisition Systems (Improved Target Acquisition System (ITAS)); Bradley TOW 2 Subsystem
(T2SS) Sustainment; and Improved Bradley Acquisition Subsystem (IBAS)
SUPPORTS: Bradley Fighting Vehicle System (BFVS), TOW Family of Missiles, and Javelin Weapon System
MJLM PAST PERFORMANCE: 10/20 Depot-Level Maintenance, Continuity Testing, MMTB Production, Logistics Support
SYSTEM COMPONENTS: 250 Shelter, Integrated Site Units (ISU), Missile Simulated Rockets (MSR), Transversing Units (TU),
& Missile Maintenance Tool Boxes (MMTB)
IRAQ WAR: Azimuth Damper Obsolescence Mitigation resulting in $500K
Government Cost-saving!
Provided 10/20 Depot-Level Maintenance via DODAAC
Analyzed 1,300+ ISU for Material Damage / Failure
Tested Circuitry of 3,000+ Missile Simulator Rockets (MSR)
Utilized Quality Management System (QMS) to track GFE ($995M value)
Live, Virtual, Constructive-Integrating Architecture (LVC-IA)
MWO Installation
14. MJLM Engineering & Technical Services
Maintenance Operations
Procedures & Prototype (MOPP) Shop
WEAPON SYSTEMS: OH-58D Kiowa Warrior & HMMWV-based Avenger Air
Defense System
SUPPORTS: Rivet Replacement Program
OBJECTIVE: Interoperability & Obsolescence Mitigation
Systems Sustainment
Management Directorate
(SSMD)
Redstone Arsenal, AL
ORGANIZATION
MJLM PAST PERFORMANCE
MJLM - Overhaul/RESET of the M3P .50-caliber Machine Gun
• Full Disassembly
• Parts Inspection
• Magnetic Particle Examination
(MPE)
• Parts Requisition
• Phosphate Coating
• Asset Reassembly
• Live-Fire Testing
• Shipping/Packaging
• Training of future Kiowa Field
Trainers (Government Personnel)
15. MJLM Engineering & Technical Services
Flexible Engine Diagnostic System…
SLEP
(SERVICE LIFE EXTENSION PROGRAM)
• Prototype Development
• System Engineering
• Obsolescence Mitigation
CUSTOMER BENEFITS
16. MJLM Engineering & Technical Services
Joint Attack Munitions System
(JAMS)
The JAMS Project Office provides an unprecedented level of service
and support as the Life Cycle Manager for the Joint Warfighter's
Rocket and Missile Systems. The JAMS Project Office manages all
variants of the 70-mm Hydra Rocket (formerly 2.75-inch Rocket) and
the HELLFIRE Missile, as well as the JAGM, Viper Strike, Griffin, Hydra
70 Rocket Launchers, HELLFIRE Launchers, and Test Sets.
RESET for JAMS Test Program Sets (TPS)
Field Maintenance, Training & Support
System Engineering
ALL Army Platforms Supported
Supports Small Guided Munitions
Technical Manual Support
SSMD Contract Vehicle
MJLM PAST PERFORMANCE
17. MJLM Engineering & Technical Services
• User-Friendly
• Cost Effective
• Battery-Operated (9VDC)
• Built In Test/ Built In Test Equipment (BIT/BITE)
• Stand-Alone Test Adapter
• Compact in Size (approx. medium sized flashlight)
Launcher Test Station (LTS) Laser
Simulator Prototype Test Adapter
MJLM provides a prototype test adapter to detect the presence of an
infrared signal being transmitted from the laser simulator on the
HELLFIRE Launcher Test Station (LTS) for the M36 training missile test.
The prototype test adapter is designed, developed, and tested at the
MJLM facility in Huntsville, Alabama.
PRODUCT FEATURES / CUSTOMER BENEFITS
18. MJLM Engineering & Technical Services
Computer-Aided Design (CAD)
• Close Combat Weapons System (CCWS)
• Flexible Engine Diagnostic System (FEDS)
• Joint Attack Munitions System (JAMS)
• Department of Energy (DOE)
• Drawing Modifications – AMRDEC
• Drawing Conversion – DOE & DoD
• Missile Simulated Rocket Modification – CCWS
• Relay Panel Assembly – FEDS
• Variable Tracking Filter – FEDS
• Timer-Panel Assembly – FEDS
• Prototyping Activities – FEDS & JAMS
MJLM PAST PERFORMANCE AGENCY/PROGRAM(S) SUPPORTED
MJLM develops 3-Level Technical Data Packages (TDP) in support of various
Government programs using software applications such as: AutoCAD®, MircoStation, and
SolidWorks for 3D-modeling tasks.
19. MJLM Engineering & Technical Services
Cable Fabrication
Cable Fabrication & Assembly
Strip/Cut to Length
Twisted Pair
Coaxial/Twin Axial
Harness Assembly
Ribbon
Multiple Assembly
Processes
Industry/Gov Standards
Heat-Shrink Tubing
Splicing
Soldering
Sealing
Crimping
• Kit Grounding
• Kiowa Warrior
• TEISP – Test Equipment Instrumentation
Support Program
• D-FEDS – Digital-Flexible Engine Diagnostic
System
• SOS – Support of Support TPS
• NGATS – Next Generation Automated Test
Sets
• AMCOM – Aviation & Missile Command
• DLA – Defense Logistics Agency
• CCWS – Close Combat Weapons System
• Army Contracting Command – Picatinny, NJ
PAST PERFORMANCE SUPPORTS
20. MJLM Engineering & Technical Services
Circuit Card Assemblies
Wire Wrap Configuration Circuit Card
Evaluation, Design, and Development
Technology Conversion
Component Installation Evaluation
Printed Circuit Card Enhancement
and Replacement
Kiowa Warrior
Test Equipment Instrumentation
Support Program (TEISP)
Flexible Engine Diagnostic System
(FEDS)
Support of Support (SOS) TPS
Produce Prototype Automatic
Gain Control (AGC) Boards
Fabricate Kiowa Warrior Printed
Circuit Boards
Convert Manual Remote re-
Keying (MRK) Interface
Connecting Device (ICD) to
Printed Circuit Boards
MJLM PAST PERFORMANCE PROGRAMS SUPPORTED
21. MJLM Engineering & Technical Services
MJLM has –
• Proven Infrastructure
• Experienced & Diverse Staff
• Customer Confidence confirmed by
High Performance Rating
• Innovation. Quality. Commitment.
In Summary…
22. MJLM Engineering & Technical Services
Contact Information
MJLM Engineering & Technical Services
4825 University Square – Suite 14
Huntsville, AL 35816
Office: 256-890-1800
Email: hsvinfo@mjlm.com
Cage Code: 3CT95
www.mjlmengineering.com