The document provides specifications for the Mini Loader HQ908, including its dimensions, engine details, operating capacities, and technical specifications. Key features highlighted are its powerful strength to attach various tools, its environmental and economic benefits, and its focus on safety and durability. Its dimensions and performance capabilities such as its lifting force, tipping load, and hydraulic pressures are listed.

1. Mini Loader HQ908 with CE and Perkins engine
Your right-hand helper
We center our work on the benefits of our customers.
 Powerful strength,and can attach many tools.
 Environmental & economical
 Safety & durability

2.  Spacious canopy provides the operator with ample legroom
 Joystick with electric forward/reverse switch
 The pump and control valve made in Italy
 Floor-mounted inching pedal gives the operator excellent simultaneous control of
travel and equipment hydraulic speeds
 Wide engine hood opening angle provides outstanding service access
Dimentions：

3. A Overal length with standard bucket 3560mm
B Overal length without bucket 2900mm
C Axle center up to bucket hinge pin 580mm
D Wheelbase 1360mm
E Rear overhang 860mm
F Height to top of ROPS bar 2150mm
G Seat height 1185mm
H Total working height 3115mm
I Max.height of bucket pivot 2570mm
J Overhead loading height 2420mm
K Max.dumping height 1900mm
L Operating diatance for K 830mm
M Track width 760mm
N Ground clearance 190mm
P Total width 950mm
Q Bar width 650mm
R Inside turning radius 1250mm
S Radius at the outer edge 2320mm
T Max.turning radius 2640mm
U Turning angle 43°
V Rollback angle at max.lifting height 45°
W Dumping angle 43°
X Backroll angle on the ground 45°
Technical specifications：
Engine / Motor：
Engine / Motor manufacturer Perkins（Kubota or kipor Engine for option )

4. Engine / Motor type 403D-11
Cylinder 3
Engine performance 18.5 kW
at rpm maximum 2,800 rpm
Displacement 1,131 cm³
Coolant type Water
Operating data and Weights：
Operating weight 1490 kg
Speed Level 1 0-12 km/h
Bucket capacity Standard bucket 0.25m³
Lifting force maximum 1,981 daN
Breakaway force maximum 1,242 daN
Tipping load with bucket - machine straight 850 kg
Tipping load with pallet fork - machine straight 790 kg
Tipping load with bucket - machine at angle 680 kg
Tipping load with pallet fork - machine at angle 650 kg
Hydraulic system：
Driving hydraulics - operating pressure 300bar
Driving hydraulics - discharge capacity 84 L/min
Operating hydraulics - operating pressure 185 bar
Operating hydraulics - discharge capacity 33 L/min
Filling capacities：
Tank capacity (fuel) 25 L
Engine oil 4 L
Hydraulic oil tank 40 L
Coolant 4.3L
Front axle 2.5L
Rear axle 2.5L
Electrical system：
Operating voltage 12 V
Battery 45Ah
Alternator 60 A
Tire：
Type as standard 27×8.5-15 or 26*12.00-12
Note : Small details of Specifications and design are subject to change without prior notice.