1) USM is looking to expand its role in Malaysia's National Roll-Out Plan for the Multimedia Super Corridor by utilizing its newly launched satellite earth station in Penang.
2) The satellite earth station will enable USM to facilitate more research related to the MSC roll-out plan.
3) The document then discusses several other technology and business related developments in Malaysia, including the potential for Penang to become a procurement hub and for Malaysia to lead in RFID technology development.
El documento describe los pasos para crear una presentación en PowerPoint, incluyendo elegir un diseño básico, agregar contenido y diapositivas, modificar el diseño y colores, y agregar texto a las diapositivas utilizando marcadores de posición, autoformas, cuadros de texto y WordArt. También explica cómo PowerPoint ajusta automáticamente el diseño cuando se agregan nuevos elementos y cómo deshacer esos cambios automáticos.
This document discusses the future of work in the Middle East, North Africa, and Turkey (MENAT) region driven by three disruptive forces: the Industrial Internet, Advanced Manufacturing, and the Global Brain. It finds that these forces provide opportunities to diversify economies, strengthen supply chains, create jobs, and improve standards of living. However, governments and businesses will need to adapt by investing in infrastructure, education, and talent to fully capitalize on these opportunities and ensure inclusive growth.
Chikitsa -Revamping The Health Sector of Maharashtra 2015Shyam Ashtekar
This is a systematic review of Maharashtra's ( A state in India) Health Sector, and a program for revamping this sector, with a 10 point agenda. The book is in Marathi, and this is an English Summary. I have dealt with public and private health sectors, as well as the global context of health system management.
El documento describe los pasos para crear una presentación en PowerPoint, incluyendo elegir un diseño básico, agregar contenido y diapositivas, modificar el diseño y colores, y agregar texto a las diapositivas utilizando marcadores de posición, autoformas, cuadros de texto y WordArt. También explica cómo PowerPoint ajusta automáticamente el diseño cuando se agregan nuevos elementos y cómo deshacer esos cambios automáticos.
This document discusses the future of work in the Middle East, North Africa, and Turkey (MENAT) region driven by three disruptive forces: the Industrial Internet, Advanced Manufacturing, and the Global Brain. It finds that these forces provide opportunities to diversify economies, strengthen supply chains, create jobs, and improve standards of living. However, governments and businesses will need to adapt by investing in infrastructure, education, and talent to fully capitalize on these opportunities and ensure inclusive growth.
Chikitsa -Revamping The Health Sector of Maharashtra 2015Shyam Ashtekar
This is a systematic review of Maharashtra's ( A state in India) Health Sector, and a program for revamping this sector, with a 10 point agenda. The book is in Marathi, and this is an English Summary. I have dealt with public and private health sectors, as well as the global context of health system management.
The document provides background information on MSC Cyberport Johor, which was established to expand Malaysia's Multimedia Super Corridor (MSC) initiative to the state of Johor. MSC Cyberport Johor operates centers located in Bandar MSC Cyberport and Menara MSC Cyberport, and has helped incubate over 70 technology companies. It works closely with local universities to generate knowledge workers and commercialize research, and has partnered with groups like British Telecom and Teleperformance to support the growth of the tech sector in Johor.
This document discusses the development and simulation of a mobile learning application for rubber cultivation in Tripura, India. It proposes using mobile technologies to provide information to rubber growers, dealers, and extension officers in the field. It describes the mobile learning paradigm and advantages of m-learning. It outlines the architecture of the proposed application, including the user repository, content management system, and interfaces for different user types. It also discusses the simulation tools used and provides screenshots of sample application pages. Finally, it describes the database design and provides areas for future development of mobile learning applications.
This document provides information on Yoki Mulyadi Widjaja's professional experience, expertise, and qualifications. He has over 15 years of experience in sales and marketing roles within the IT infrastructure industry. Notable roles include Product Manager, Channel Sales Manager, and Sales Manager for various networking, data center, and cabling equipment brands. He has a proven track record of achieving sales targets and developing new business opportunities and channel partner relationships.
3 months telecom training with guaranteed placementBikas Singh
3 months telecom training is a RF specializaton training with assured placement. This telecom training is for B.E./B.TECH/DIPLOMA graduates who are to build their career in telecom sector.
Telecom industry has a huge requirement of skilled manpower with updated knowledge of upcoming technologies (IOT,M2M,SDN,NFV). But engineering graduates lack these skills.
Apeksha telecom bridges this gap of required telecom skills through this 3 months telecom training.
This training imparts conceptual as well as practical skills required to measure and monitor the wireless network.
3 months telecom training prepares an engineering graduate for the profile of RF engineer.
1) The document is a report on Telekom Malaysia Berhad (TM) that outlines its business environment.
2) TM operates in both domestic and global business environments, providing telecommunication services across Malaysia and partnering with other countries in Southeast Asia.
3) Domestically, TM aims to expand broadband access across Malaysia, including rural areas, and provides services like Streamyx, Unifi, and WEBE. Globally, it has formed partnerships and submarine cable systems with Thailand and Cambodia to expand connectivity.
This document is a training report submitted by Jatin Kumar, a student at B.S. Anangpuria Institute of Technology and Management, in partial fulfillment of the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. The report provides an overview of the student's training at Electronics Niketan, under the Ministry of Communication and Information Technology, Government of India. It includes acknowledgments, a table of contents, and sections on the company profile, an introduction to cognitive radio and dynamic spectrum access, the history and background leading to cognitive radio, basic concepts of cognitive radio, and future applications.
Panorama Antennas Sharkee Feature in Critical Comms Magazine May/Jun 2017 Jana Perlet
The Hytera Multi-mode Advanced Radio offers a convergent platform that supports both critical voice and broadband data services on different networks. It provides a unified communication experience with rich applications and high-level security. The radio can seamlessly switch between narrowband networks like DMR and TETRA, as well as broadband networks like LTE. It has a rugged design with touchscreens, cameras, and customization capabilities. The ergonomic design combined with security features allows users to respond quickly and effectively in different situations.
The Mobile and Pervasive Computing Institute at Lund University is being inaugurated in spring 2013 through a collaboration between mobile industry, Lund University, and the Regional Council of Skåne. The institute aims to strengthen mobile communications research and innovation at the university and bridge industry and academia. Key activities will include graduate research, contract education, and supporting knowledge exchange between industry and academia. The goal is to establish Skåne as an international hub for mobile communications research, innovation, and commercialization.
The document provides information on Malaysia's MSC Innovation Voucher program, which aims to increase collaboration between Malaysian companies and research institutions. It offers matching funds of RM8,000 for companies to procure technical services from approved public and private universities. Eligible services include feasibility studies, prototyping, skills training, and more across technologies like cloud computing, IoT, and cybersecurity. The program guidelines specify the application process, eligibility criteria, terms of use, and lists of approved technology areas and service providers.
Masterplan is a leading systems integrator that ensures the success of designing, developing, installing, testing, and accepting total technology solutions. It has experience in various platforms and provides comprehensive and timely solutions to government and commercial clients. Its business solutions incorporate expertise in emerging technologies to further quality.
The document discusses several flagship applications of the Multimedia Super Corridor (MSC) in Malaysia, including electronic government, smart cards, telehealth, borderless marketing centres, worldwide manufacturing webs, and research and development centres. It provides details on the objectives and examples of projects for the electronic government and telehealth flagships. It also describes the goals and potential applications of the other flagships such as online information services, electronic commerce, and digital broadcasting for borderless marketing centres.
The document discusses several flagship applications of the Multimedia Super Corridor (MSC) in Malaysia, including electronic government, smart cards, telehealth, borderless marketing centres, worldwide manufacturing webs, and research and development centres. It provides details on the objectives and examples of projects for the electronic government and telehealth flagships. It also describes the goals and potential applications of the other flagships such as online information services, electronic commerce, and digital broadcasting for borderless marketing centres.
The document discusses several flagship applications of Malaysia's Multimedia Super Corridor (MSC) initiative to promote the use of information and communication technologies. It describes electronic government services, telehealth programs, borderless marketing centers, the world wide manufacturing web, and research and development centers. It also outlines smart card applications like MyKad which aims to develop a multi-purpose identification card.
The document discusses several flagship applications of the Multimedia Super Corridor (MSC) in Malaysia, including electronic government, smart cards, telehealth, borderless marketing centres, worldwide manufacturing webs, and research and development centres. It provides details on the objectives and examples of projects for the electronic government and telehealth flagships. It also describes the goals and potential applications of the other flagships such as online information services, electronic commerce, and digital broadcasting for borderless marketing centres.
The document discusses several flagship applications of the Multimedia Super Corridor (MSC) in Malaysia, including electronic government, smart cards, telehealth, borderless marketing centres, worldwide manufacturing webs, and research and development centres. It provides details on the objectives and examples of projects implemented for the electronic government and telehealth applications.
The document discusses several flagship applications of the Multimedia Super Corridor (MSC) in Malaysia, including electronic government, smart cards, telehealth, borderless marketing centres, worldwide manufacturing webs, and research and development centres. It provides details on the objectives and examples of projects for the electronic government and telehealth applications. It also describes the goals and potential uses of smart cards, borderless marketing centres, worldwide manufacturing webs, and research and development centres as MSC flagships.
The document discusses several flagship applications of the Multimedia Super Corridor (MSC) in Malaysia, including electronic government, smart cards, telehealth, borderless marketing centres, worldwide manufacturing webs, and research and development centres. It provides details on the objectives and examples of projects for the electronic government and telehealth flagships. It also describes the goals and potential applications of the other flagships such as online information services, electronic commerce, and digital broadcasting for borderless marketing centres.
The document discusses several flagship applications of the Multimedia Super Corridor (MSC) in Malaysia, including electronic government, smart cards, telehealth, borderless marketing centres, worldwide manufacturing webs, and research and development centres. It provides details on the objectives and examples of projects for the electronic government and telehealth flagships. It also describes the goals and potential applications of the other flagships such as online information services, electronic commerce, and digital broadcasting for borderless marketing centres.
The document discusses industry-university partnerships, including examples from the Tata Group. It notes that such partnerships are changing from general engagement to more targeted collaborations in specific areas. Recent Tata partnerships include the National Automotive Innovation Centre with the University of Warwick to support automotive research, and Tata Consultancy Services' collaboration with Singapore Management University to develop intelligent city solutions, using Singapore as a pilot project. The document emphasizes that industry-university partnerships can help address industry needs for innovation while developing skills and inspiring new generations of professionals.
Poster on Psychosocial risk factors and musculoskeletal symptoms among nursesSiti Mastura
Nurses are at high risk of developing musculoskeletal symptoms due to the physical demands of their work including lifting, awkward postures, and transferring patients. This study examined the prevalence of musculoskeletal symptoms and relationship to psychosocial risk factors among nurses at Sultanah Bahiyah Hospital in Kedah, Malaysia. The results showed the highest prevalence of symptoms was in the upper back (70.6%), lower back (58%), and shoulders (55.9%). Most nurses reported high decision latitude, high job demands, good social support, high job insecurity, and job dissatisfaction. Social support and job insecurity were significantly associated with musculoskeletal symptoms. The findings suggest improving social support through team building and addressing job insecurity to help minimize
PSYCHOSOCIAL RISK FACTORS AND MUSCULOSKELETAL SYMPTOMS AMONG NURSESSiti Mastura
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
The document provides background information on MSC Cyberport Johor, which was established to expand Malaysia's Multimedia Super Corridor (MSC) initiative to the state of Johor. MSC Cyberport Johor operates centers located in Bandar MSC Cyberport and Menara MSC Cyberport, and has helped incubate over 70 technology companies. It works closely with local universities to generate knowledge workers and commercialize research, and has partnered with groups like British Telecom and Teleperformance to support the growth of the tech sector in Johor.
This document discusses the development and simulation of a mobile learning application for rubber cultivation in Tripura, India. It proposes using mobile technologies to provide information to rubber growers, dealers, and extension officers in the field. It describes the mobile learning paradigm and advantages of m-learning. It outlines the architecture of the proposed application, including the user repository, content management system, and interfaces for different user types. It also discusses the simulation tools used and provides screenshots of sample application pages. Finally, it describes the database design and provides areas for future development of mobile learning applications.
This document provides information on Yoki Mulyadi Widjaja's professional experience, expertise, and qualifications. He has over 15 years of experience in sales and marketing roles within the IT infrastructure industry. Notable roles include Product Manager, Channel Sales Manager, and Sales Manager for various networking, data center, and cabling equipment brands. He has a proven track record of achieving sales targets and developing new business opportunities and channel partner relationships.
3 months telecom training with guaranteed placementBikas Singh
3 months telecom training is a RF specializaton training with assured placement. This telecom training is for B.E./B.TECH/DIPLOMA graduates who are to build their career in telecom sector.
Telecom industry has a huge requirement of skilled manpower with updated knowledge of upcoming technologies (IOT,M2M,SDN,NFV). But engineering graduates lack these skills.
Apeksha telecom bridges this gap of required telecom skills through this 3 months telecom training.
This training imparts conceptual as well as practical skills required to measure and monitor the wireless network.
3 months telecom training prepares an engineering graduate for the profile of RF engineer.
1) The document is a report on Telekom Malaysia Berhad (TM) that outlines its business environment.
2) TM operates in both domestic and global business environments, providing telecommunication services across Malaysia and partnering with other countries in Southeast Asia.
3) Domestically, TM aims to expand broadband access across Malaysia, including rural areas, and provides services like Streamyx, Unifi, and WEBE. Globally, it has formed partnerships and submarine cable systems with Thailand and Cambodia to expand connectivity.
This document is a training report submitted by Jatin Kumar, a student at B.S. Anangpuria Institute of Technology and Management, in partial fulfillment of the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. The report provides an overview of the student's training at Electronics Niketan, under the Ministry of Communication and Information Technology, Government of India. It includes acknowledgments, a table of contents, and sections on the company profile, an introduction to cognitive radio and dynamic spectrum access, the history and background leading to cognitive radio, basic concepts of cognitive radio, and future applications.
Panorama Antennas Sharkee Feature in Critical Comms Magazine May/Jun 2017 Jana Perlet
The Hytera Multi-mode Advanced Radio offers a convergent platform that supports both critical voice and broadband data services on different networks. It provides a unified communication experience with rich applications and high-level security. The radio can seamlessly switch between narrowband networks like DMR and TETRA, as well as broadband networks like LTE. It has a rugged design with touchscreens, cameras, and customization capabilities. The ergonomic design combined with security features allows users to respond quickly and effectively in different situations.
The Mobile and Pervasive Computing Institute at Lund University is being inaugurated in spring 2013 through a collaboration between mobile industry, Lund University, and the Regional Council of Skåne. The institute aims to strengthen mobile communications research and innovation at the university and bridge industry and academia. Key activities will include graduate research, contract education, and supporting knowledge exchange between industry and academia. The goal is to establish Skåne as an international hub for mobile communications research, innovation, and commercialization.
The document provides information on Malaysia's MSC Innovation Voucher program, which aims to increase collaboration between Malaysian companies and research institutions. It offers matching funds of RM8,000 for companies to procure technical services from approved public and private universities. Eligible services include feasibility studies, prototyping, skills training, and more across technologies like cloud computing, IoT, and cybersecurity. The program guidelines specify the application process, eligibility criteria, terms of use, and lists of approved technology areas and service providers.
Masterplan is a leading systems integrator that ensures the success of designing, developing, installing, testing, and accepting total technology solutions. It has experience in various platforms and provides comprehensive and timely solutions to government and commercial clients. Its business solutions incorporate expertise in emerging technologies to further quality.
The document discusses several flagship applications of the Multimedia Super Corridor (MSC) in Malaysia, including electronic government, smart cards, telehealth, borderless marketing centres, worldwide manufacturing webs, and research and development centres. It provides details on the objectives and examples of projects for the electronic government and telehealth flagships. It also describes the goals and potential applications of the other flagships such as online information services, electronic commerce, and digital broadcasting for borderless marketing centres.
The document discusses several flagship applications of the Multimedia Super Corridor (MSC) in Malaysia, including electronic government, smart cards, telehealth, borderless marketing centres, worldwide manufacturing webs, and research and development centres. It provides details on the objectives and examples of projects for the electronic government and telehealth flagships. It also describes the goals and potential applications of the other flagships such as online information services, electronic commerce, and digital broadcasting for borderless marketing centres.
The document discusses several flagship applications of Malaysia's Multimedia Super Corridor (MSC) initiative to promote the use of information and communication technologies. It describes electronic government services, telehealth programs, borderless marketing centers, the world wide manufacturing web, and research and development centers. It also outlines smart card applications like MyKad which aims to develop a multi-purpose identification card.
The document discusses several flagship applications of the Multimedia Super Corridor (MSC) in Malaysia, including electronic government, smart cards, telehealth, borderless marketing centres, worldwide manufacturing webs, and research and development centres. It provides details on the objectives and examples of projects for the electronic government and telehealth flagships. It also describes the goals and potential applications of the other flagships such as online information services, electronic commerce, and digital broadcasting for borderless marketing centres.
The document discusses several flagship applications of the Multimedia Super Corridor (MSC) in Malaysia, including electronic government, smart cards, telehealth, borderless marketing centres, worldwide manufacturing webs, and research and development centres. It provides details on the objectives and examples of projects implemented for the electronic government and telehealth applications.
The document discusses several flagship applications of the Multimedia Super Corridor (MSC) in Malaysia, including electronic government, smart cards, telehealth, borderless marketing centres, worldwide manufacturing webs, and research and development centres. It provides details on the objectives and examples of projects for the electronic government and telehealth applications. It also describes the goals and potential uses of smart cards, borderless marketing centres, worldwide manufacturing webs, and research and development centres as MSC flagships.
The document discusses several flagship applications of the Multimedia Super Corridor (MSC) in Malaysia, including electronic government, smart cards, telehealth, borderless marketing centres, worldwide manufacturing webs, and research and development centres. It provides details on the objectives and examples of projects for the electronic government and telehealth flagships. It also describes the goals and potential applications of the other flagships such as online information services, electronic commerce, and digital broadcasting for borderless marketing centres.
The document discusses several flagship applications of the Multimedia Super Corridor (MSC) in Malaysia, including electronic government, smart cards, telehealth, borderless marketing centres, worldwide manufacturing webs, and research and development centres. It provides details on the objectives and examples of projects for the electronic government and telehealth flagships. It also describes the goals and potential applications of the other flagships such as online information services, electronic commerce, and digital broadcasting for borderless marketing centres.
The document discusses industry-university partnerships, including examples from the Tata Group. It notes that such partnerships are changing from general engagement to more targeted collaborations in specific areas. Recent Tata partnerships include the National Automotive Innovation Centre with the University of Warwick to support automotive research, and Tata Consultancy Services' collaboration with Singapore Management University to develop intelligent city solutions, using Singapore as a pilot project. The document emphasizes that industry-university partnerships can help address industry needs for innovation while developing skills and inspiring new generations of professionals.
Poster on Psychosocial risk factors and musculoskeletal symptoms among nursesSiti Mastura
Nurses are at high risk of developing musculoskeletal symptoms due to the physical demands of their work including lifting, awkward postures, and transferring patients. This study examined the prevalence of musculoskeletal symptoms and relationship to psychosocial risk factors among nurses at Sultanah Bahiyah Hospital in Kedah, Malaysia. The results showed the highest prevalence of symptoms was in the upper back (70.6%), lower back (58%), and shoulders (55.9%). Most nurses reported high decision latitude, high job demands, good social support, high job insecurity, and job dissatisfaction. Social support and job insecurity were significantly associated with musculoskeletal symptoms. The findings suggest improving social support through team building and addressing job insecurity to help minimize
PSYCHOSOCIAL RISK FACTORS AND MUSCULOSKELETAL SYMPTOMS AMONG NURSESSiti Mastura
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
valuation of toxicological implications of inhalationexposure to kerosene fum...Siti Mastura
This document summarizes a study that evaluated the toxic effects of inhaling kerosene and petrol fumes in rats. The rats were exposed to the fumes for 4 hours per day over 2 weeks. Blood tests and liver tissue analysis were then used to assess liver damage. The study found that rats exposed to the fumes had significantly higher levels of liver enzymes (ALT, AST, ALP) and lipids (cholesterol, triglycerides) compared to unexposed rats, indicating liver dysfunction. Examination of liver tissues also revealed degenerative changes, supporting the biochemical results. The findings suggest that frequent exposure to kerosene and petrol fumes may be highly damaging to liver cells.
This guide provides an introduction to using SPSS 14. It includes instructions on starting SPSS, defining variables, entering data, computing new variables, selecting data subsets, and running basic statistical procedures such as frequencies, descriptives, and exploring normality. Key steps covered are creating variables in the Variable View window, entering data in the Data View window, using the Compute function to calculate a new "age" variable, selecting cases where age is less than 30, and analyzing the normality of a variable distribution through histograms, normal Q-Q plots, and Kolmogorov-Smirnov and Shapiro-Wilk tests of normality.
This document outlines the key elements of a model emergency preparedness plan for mining operations. It discusses the responsibilities of the mining company and the importance of engaging local communities, emergency response teams, and governments. The 10 steps of the UNEP APELL process for emergency planning are described. Case studies are referenced that illustrate how to effectively apply these principles of community involvement, hazard identification, emergency response training, and continuous improvement of emergency plans.
This document discusses principles of hazard tree risk management for wildland firefighters. It notes that falling trees remain a persistent threat and one of the leading causes of firefighter fatalities. The risk is determined by both the likelihood of a hazard occurring and the severity of potential consequences. Strategies are outlined for conducting strategic and tactical risk assessments to rate risk levels and implement appropriate mitigation measures to reduce risk to moderate or low levels where possible. Emergency response plans should also be in place to effectively respond if injuries do occur from hazard trees.
This document provides a report on firefighter training trends and hazards from the U.S. Fire Administration. It details several training incidents that resulted in injuries or near misses. It also summarizes training casualty data and discusses common hazards in training such as live fire exercises, physical stress, and unsafe practices. The report emphasizes the importance of following standards from the National Fire Protection Association and having proper safety protocols, qualified instructors, appropriate facilities, and medical support to reduce risks during firefighter training activities.
This document provides an overview of fault tree analysis (FTA):
1. FTA is a graphic method to identify the causes of failures or negative events in a system. It uses deductive reasoning to break down a negative event into its potential causes.
2. An FTA diagram uses symbols like rectangles, circles, and gates to represent events and their relationships. The analysis involves defining the negative event, understanding the system, constructing the tree, validating it, and evaluating alternatives.
3. The primary benefits of FTA are the meaningful data it produces to evaluate and improve system reliability. A limitation is that all significant failure contributors must be anticipated.
Guidelines for Incident Commanders- Final ReportFFPE Use in Chemical Agent VaporSiti Mastura
This document provides 3 levels of guidelines for incident commanders on the use of firefighter protective equipment during chemical agent rescue operations:
1. General guidelines provide maximum rescue time of 30 minutes for known living victims using standard turnout gear and SCBA, and 3 minutes for reconnaissance in unknown environments.
2. Representative exposure scenarios and test results in tables/graphs show protective performance of equipment in chemical environments.
3. Recommendations to reduce exposure time and agent concentrations, improve equipment, conduct pre-incident planning, and train responders to mitigate risks during rescue operations.
jurnal of occupational safety and healthSiti Mastura
The document summarizes an ergonomic study to optimize the design of a printing workstation. 4 factors were considered: the horizontal distance between the machine and worker (A), the vertical height of the work table (B), the vertical attitude of the material box (C), and the angle of the material box slope (D). The study used factorial experiments and response surface methodology to evaluate configurations based on 4 performance measures: cycle time, metabolic energy expenditure, worker posture, and lifting limitations. The results showed an optimized configuration (1121) reduced cycle time by 17.5% compared to the initial design, demonstrating how ergonomic optimization can improve productivity and working conditions.
The document describes several key microbiology techniques: 1) Aseptic technique for preventing contamination when transferring bacteria or collecting specimens. 2) Using inoculating loops to transfer bacterial colonies while flaming the loop to sterilize it. 3) Creating bacterial smears on slides by spreading suspensions to make thin films for staining. 4) Heat fixation to adhere bacteria to slides before staining. 5) Streaking loops of bacteria on agar plates to isolate single colonies.
Requirement and Technical Standard for Non Convention Cargo Siti Mastura
This document outlines technical requirements and standards for non-conventional cargo ships pertaining to safety, construction, radio, life saving appliances, and navigational aids. It includes 10 chapters that cover general provisions, inspections and surveys, construction and equipment, stability requirements, machinery installation, electrical installations, fire protection and extinction, life saving appliances, radio installations, and navigational equipment. The document provides definitions for key terms and sets minimum requirements for ships to obtain necessary certificates.
This document provides an overview of fault tree analysis, including its origins in 1962 for the US Air Force, how it is a graphical model of pathways leading to an undesirable loss event using logic symbols, and some key steps and rules in developing a fault tree analysis. It defines important terms like fault, failure, primary and secondary failures. It also illustrates some common logic symbols used and provides examples of potential top events to analyze.
Japanese Encephalitis is a mosquito-borne viral disease that affects the central nervous system. It is caused by the Japanese Encephalitis virus and transmitted via Culex mosquitoes. The virus is maintained in birds and pigs, which serve as amplifying hosts. While humans are incidental hosts, the disease can cause serious neurological illness. The document provides guidelines on the epidemiology, diagnosis, management, and prevention of Japanese Encephalitis in India.
This document presents a mathematical model of the spread of Japanese Encephalitis (JE) that couples SIRS models for the disease in both the reservoir population and human population. The model classifies populations into susceptible, infected, and removed classes. It derives equations to describe the dynamics and calculates the basic reproductive rate R0. The model shows that unlike other models, loss of immunity in this system is independent of exposure rate. It suggests passive immunization at recurrent intervals as the best control strategy to eradicate the disease.
Communication for behavioral impact(COMBI)Siti Mastura
The document describes a COMBI program in Malaysia to control dengue through community behavior change. The program was piloted in Hulu Langat, Selangor where most Aedes breeding occurred in semi-permanent water containers. 172 volunteers educated residents to check containers twice weekly and eliminate larvae. This reduced the Aedes Index from 5 to 0.96 over 16 weeks and dropped reported dengue cases in the area to 1. The COMBI approach successfully identified local breeding factors and engaged the community to potentially reduce disease transmission.
This document provides an overview of vector control in humanitarian emergencies. It describes the public health importance of vector-borne diseases among displaced populations, characterizes common disease vectors such as mosquitoes and flies, and defines approaches for developing context-appropriate vector control strategies. The document focuses on controlling vectors through methods like indoor residual spraying and larviciding, as well as safely monitoring vector control programs.
The nominal group technique (NGT) is a structured consensus-building process involving 4 steps: 1) individuals privately generate ideas in writing, 2) ideas are shared aloud and listed, 3) ideas are discussed one-by-one for clarity, and 4) ideas are ranked through anonymous voting to determine priorities. NGT encourages participation, prevents domination by any one person, and results in prioritized group recommendations. It is best used when gaining consensus from multiple stakeholders on priorities.
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...indexPub
The recent surge in pro-Palestine student activism has prompted significant responses from universities, ranging from negotiations and divestment commitments to increased transparency about investments in companies supporting the war on Gaza. This activism has led to the cessation of student encampments but also highlighted the substantial sacrifices made by students, including academic disruptions and personal risks. The primary drivers of these protests are poor university administration, lack of transparency, and inadequate communication between officials and students. This study examines the profound emotional, psychological, and professional impacts on students engaged in pro-Palestine protests, focusing on Generation Z's (Gen-Z) activism dynamics. This paper explores the significant sacrifices made by these students and even the professors supporting the pro-Palestine movement, with a focus on recent global movements. Through an in-depth analysis of printed and electronic media, the study examines the impacts of these sacrifices on the academic and personal lives of those involved. The paper highlights examples from various universities, demonstrating student activism's long-term and short-term effects, including disciplinary actions, social backlash, and career implications. The researchers also explore the broader implications of student sacrifices. The findings reveal that these sacrifices are driven by a profound commitment to justice and human rights, and are influenced by the increasing availability of information, peer interactions, and personal convictions. The study also discusses the broader implications of this activism, comparing it to historical precedents and assessing its potential to influence policy and public opinion. The emotional and psychological toll on student activists is significant, but their sense of purpose and community support mitigates some of these challenges. However, the researchers call for acknowledging the broader Impact of these sacrifices on the future global movement of FreePalestine.
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
How to Manage Reception Report in Odoo 17Celine George
A business may deal with both sales and purchases occasionally. They buy things from vendors and then sell them to their customers. Such dealings can be confusing at times. Because multiple clients may inquire about the same product at the same time, after purchasing those products, customers must be assigned to them. Odoo has a tool called Reception Report that can be used to complete this assignment. By enabling this, a reception report comes automatically after confirming a receipt, from which we can assign products to orders.
How Barcodes Can Be Leveraged Within Odoo 17Celine George
In this presentation, we will explore how barcodes can be leveraged within Odoo 17 to streamline our manufacturing processes. We will cover the configuration steps, how to utilize barcodes in different manufacturing scenarios, and the overall benefits of implementing this technology.
A Visual Guide to 1 Samuel | A Tale of Two HeartsSteve Thomason
These slides walk through the story of 1 Samuel. Samuel is the last judge of Israel. The people reject God and want a king. Saul is anointed as the first king, but he is not a good king. David, the shepherd boy is anointed and Saul is envious of him. David shows honor while Saul continues to self destruct.
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptxCapitolTechU
Slides from a Capitol Technology University webinar held June 20, 2024. The webinar featured Dr. Donovan Wright, presenting on the Department of Defense Digital Transformation.
This presentation was provided by Racquel Jemison, Ph.D., Christina MacLaughlin, Ph.D., and Paulomi Majumder. Ph.D., all of the American Chemical Society, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...EduSkills OECD
Andreas Schleicher, Director of Education and Skills at the OECD presents at the launch of PISA 2022 Volume III - Creative Minds, Creative Schools on 18 June 2024.
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Midas apr-jun jul-sep 04
1. PERPUSTAKAAN UNIVERSITI SAINS MALAYSIA
MIDAS
MAKLUMAT INDUSTRI
Jil.32, Bil. 2 & 3, Apr-Jun & Jul-Sep 2004
DAN SAINS
INFORMATION SERVICE
FOR ISSN 0126-8708
COMMERCE & INDUSTRY
MAKLUMAT PERDAGANGAN KANDUNGAN / CONTENTS
DAN PERNIAGAAN /
TRADE AND COMMERCIAL
INFORMATION MAKLUMAT PERDAGANGAN DAN
PERNIAGAAN / TRADE AND COMMERCIAL 1
INFORMATION
MAKLUMAT PENGELUARAN / 3
USM EYES BIGGER ROLE IN NATIONAL PRODUCT INFORMATION
ROLL-OUT PLAN FOR MSC
ULASAN BUKU / BOOK REVIEWS 4
Universiti Sains Malaysia (USM) is looking to a more
prominent role in the impending National Roll-Out plan for MAKLUMAT PENYELIDIKAN DARI USM / 7
the Multimedia Super Corridor (MSC) via its newly-launched RESEARCH INFORMATION FROM USM
satellite earth station in Penang, sources were quoted.
USM Vice-Chancellor Professor Datuk Dzulkifli Abdul PERKHIDMATAN KESEDARAN KINI 11
Razak said yesterday the university’s second 4.5-metre / CURRENT AWARENESS SERVICE
C-band VSAT antenna, which sits atop the School of
Computer Sciences’ premises, will enable USM to facilitate
more research in areas deemed important in relation to the PERPUSTAKAAN
MSC roll-out. (VSAT technology is a telecommunication UNIVERSITI SAINS MALAYSIA
system based on wireless satellite technology. The term
11800 USM, Pulau Pinang, Malaysia
“VSAT” stands for “Very Small Aperture Terminal”. VSAT
technology is made up of a small satellite earth station and a http://www.lib.usm.my
typical antenna of 1.8 metres in diameter). Penang and Kulim
have been identified as the new centres of development of the
MSC outside Cyberjaya. USM has MSC status, while its
corporate arm — Usains Holding Sdn Bhd — has MSC
incubator-status. Penang’s MSC Cyber City project will serve US GROUP SET TO MAKE PENANG ITS
as Phase Two of the MSC rollout. Its proposed Cyber City HIGH-END PROCUREMENT HUB
will see the conversion of a portion of the Bayan Lepas Free
Industrial Zone on the island linked northwards to USM’s Penang will emerge as a key investment hub for
main campus at Minden into the MSC Cyber City. The new international procurement, manufacturing and research
antenna found at the satellite earth station is managed by and development (R and D) of high-end products if the
USM’s Network Research Group (NRG) from its School of proposed acquisition of a French microelectronics
Computer Sciences. company by an American organisation is realized,
NRG’s Network Head and Programme Chairman Associate sources were quoted. US-based Shah Management LLC
Professor Sureswaran Ramadass said since the installation, and three of its partners, who plan to buy up TEC France,
the antenna has been used extensively for research activities are looking at establishing an international procurement
within the Asia Pacific region. centre (IPC) at Penang’s Multimedia Super Corridor
The project is led by Keio University of Japan and its “cyber city” in the Bayan Lepas Free Industrial Zone and
partners comprising collaborators and researchers from a manufacturing presence in Seberang Jaya in mainland
institutions of higher learning from Asian countries like Penang. The IPC, which will be established by the end of
Thailand, Indonesia and the Philippines. October this year.
2. MALAYSIAN CHIP MAY LEAD THE WAY
Malaysia could lead the Asia Pacific region, and perhaps According to Kulim Technology Park Corp, which
even the world, in realising the “ubiquitous society,” where manages the park, KHTP currently has about 10 such
anyone can track anything, anywhere and at any time, using companies rendering support to Silterra, the first and only
radio frequency identification (RFID) technology. wafer fabrication plant in Peninsular Malaysia and also a
Japanese firm FEC Inc. believes that the creation of such a tenant of the park.
ubiquitous society would be based on the world’s smallest Its Group Chief Executive Officer Datuk Ahmad Shukri
RFID chip, known as the Malaysian Microchip, the Tajuddin said the cluster of wafer fabrication companies
Multiband Microchip or simply, the MM Chip. could play a dual role in the park, including to continue
The MM Chip is touted as the first multifrequency chip that supporting Silterra’s operations. The other is to attract
supports all frequencies from 13.56 megahertz (MHz) to other wafer fabrication companies to locate their
2.45 gigahertz (GHz). In addition, it has a write-once operations in the park.
capability that can store 32 bytes of data within its 0.25 sq To achieve this, the park intends to fully leverage its
mm area. cybercity status, which invariably has the additional
The chip is unique because it comes with an onboard pulling power to attract more companies to locate their
antenna, which operates at the microwave frequency of operations in its premises. (KHTP and the Bayan Lepas
2.45GHz, with a readable distance of up to 3mm. Area in Penang were recently given the MSC cybercity
To increase its reading distance, the MM Chip has extra status by the Government to mark the initial stage of the
connectors for a 13.56MHz booster antenna and a 950MHz MSC rollout nationwide.)
external antenna, which can achieve read distances of up to
about 30cm and 50cm respectively. The detection range is
from 1mm to 1.7m. BRAUN TO INCREASE EFFICIENCY OF
Now, nearly one year after Malaysia acquired the rights for ASIA-PACIFIC
it, the MM Chip has reached the engineering sample stage.
A commercial sample of the chip could be made available to B. Braun, a global supplier of healthcare products, intends
applications developers as early as next year. A field test of to increase the efficiency of its distribution in the Asia
the engineering sample will commence in October until the Pacific region by between 20% and 30% with its new
end of the year, to be conducted by Japanese and Malaysian Regional Distribution Centre (RDC) in Penang, sources
partners, to test the chip’s functionality and how it can be were quoted.
adapted to the local environment. The move is expected to increase port usage that will
According to FEC (M) Sdn Bhd, a joint venture between the benefit freight forwarders, thus indirectly helping to boost
Malaysian Government and FEC Inc. after the field test, the the economy in the state.
company will move into an “application testing phase” with B. Braun Asia Pacific President Datuk Hans Peter Brenner
two to three projects lined up with certain ministries. said the company was in the midst of acquiring tax-free
Applications developers can then look forward to receiving status for the movement of its goods in Penang.
the MM Chip's data sheet and development kits for the The tax-free status is expected to be concluded with the
chipset, readers and tags. The first stage of mass production Ministry of International Trade and Industry and
is scheduled to commence in Japan early next year. Malaysian Industrial Development Authority by the end of
FEC Malaysia is in the process of identifying potential this year. Penang was chosen as a location for its RDC
partners that have the capability and compatible technology ahead of China due to the speed in which goods could be
to produce the MM chip locally. cleared by Customs and that such a move was cheaper.
The MM Committee (MMC) is believed to be identifying He said the RDC will procure and consolidate goods from
suitable partners and collaborating with local universities to inter-company manufacturing plants throughout the world.
continue with research and development of the chip, sources In addition to warehousing and handling of goods, the
were quoted. RDC will also perform value-added services such as
customer service, order processing, distribution and
transportation, quality assurance and control,
bulk-breaking, packing and kitting, labelling and
REGIONAL HUB FOR WAFER FABRICATION
cross-docking.
Malaysia may soon become a major hub for wafer
fabrication activities in the Asia-Pacific through initiatives
by Kulim Hi-Tech Park (KHTP) to strengthen its position in
the region, sources were quoted.
KHTP, which was recently conferred Multimedia Super
Corridor (MSC) cybercity status, plans to include such
activities as one of its major milestones by bringing in
integrated circuit design houses and companies in wafer
packaging, test, assembly and related services.
MIDAS Bulletin Jil.32, Bil. 2 & 3, Apr-Jun & Jul-Sep 2004. 2
3. MAKLUMAT PENGELUARAN /
CLEAN SWEEP
PRODUCT INFORMATION
Using an RTP long fiber compound, HP-Industrial of
Denmark has designed a one-piece broom handle to meet
CIBA TARGETS INNOVATION IN PLASTICS the stringent sanitation requirements of the food and
ADDITIVES pharmaceutical industries, sources were quoted. Smooth
and completely sealed, with no joints or seams, the new
Ciba Specialty Chemicals believes that the development of design is said to eliminate areas where bacteria could
new technologies in additives can not only accelerate the develop. The foremost design requirements for the HP
displacement of traditional materials by plastics but also project were strength and rigidity. Moreover, the handle's
open new markets for polymers, sources were quoted. 60-80 inch length demanded a material with high flow
The company, which is the world market leader in plastics characteristics and a generous processing window. Thus,
additives, plans to boost the functionality of plastic says RTP, it recommended a 100 Series long glass
products through the use of additives as, for example, fiber-reinforced polypropylene compound with a
growth promoters, oxygen scavengers, biocides and flow-enhancement package.
biodegradables. To meet design requirements, an injection mold with a
flow length of 80 x 1.25 inch (200 x 3.2 cm) was built, and
Ciba recently introduced a photoselective additive for
an internal core was used to achieve a consistent 0.08-inch
plastic films for greenhouses that converts UV-light into
(2-mm) wall thickness throughout the handle. Processing
red light by luminescence. Red light is highly beneficial for
adjustments provided a smooth, resin-rich surface.
growth in plants.
According to HP, the surface finish is equal to that of an
"The film is being used in the greenhouses of rose growers
unfilled resin; there is no visible evidence of the
who have been able to increase yields by 40 percent,"
reinforcing fibers. Because of the compound's heightened
explained Andreas Thuermer, an R&D executive in Ciba's
resistance to creep and fatigue, the handle is able to hold
plastic additives division. "We believe it can be applied to
dimensions well, both out of the mold and through time
other horticultural sectors like vegetables."
under load, RTP adds.
Among Ciba's other new products is a hydrophilic additive
The company points out that the compound also meets
for polypropylene that enables the polyolefin to be used in
design requirements for chemical and heat resistance to
hygiene products such as diapers. Ciba is putting a lot of
withstand repeated cleaning with hot water or steam,
effort into the development of non-halogenated flame
detergents, and disinfectants.
retardants, which have the potential to substantially exceed
the current 3 to 5 percent growth rate in the flame retardant Moreover, says RTP, it meets the FDA's extraction limits
market, based on their environmental compatibility. for polypropylene, and it is fully recyclable.
MICROSOFT HAS NEW TAKE ON NEW INSECTICIDE APPROVED
VIRTUALIZATION
The EPA has granted federal registration to a new, unique
mode of action chemistry, which will provide
Microsoft promises to ease server application migration
and simplify test environments with the forthcoming broad-spectrum control of plant bugs, stink bugs and other
mid to late season insect pests. The product, Diamond, will
release of Virtual Server 2005, an application that
be marketed by Uniroyal Crompton, sources were quoted.
virtualizes the Windows 2003 Server operating system,
Diamond controls insects by interfering with chitin
sources were quoted. Virtual Server 2005 allows
administrators to concurrently run multiple operating development, which causes the target pest to produce a
systems or multiple instances of Windows 2003 Server. weak or malformed exoskeleton. Applied early when insect
Virtual Server 2005 is a browser-managed product, which pests are in their larvae/nymph stage, the product prevents
allows administrators to manage virtual machines from juvenile tarnished plant bugs, clouded plant bugs, stink
most anywhere using Internet Explorer. Microsoft believes bugs, armyworms, loopers, budworms, bollworms, cotton
Virtual Server 2005 will be used primarily as a method to leaf perforators and salt marsh caterpillars from reaching
migrate legacy applications. the next stage of growth.
MIDAS Bulletin Jil.32, Bil. 2, & 3 Apr-Jun & Jul-Sep 2004 3
4. ULASAN BUKU / BOOK REVIEWS
MATHEMATICS for electricity and electronics.
Arthur D. Kramer. 2nd ed. Albany: Delmar/Thomson
Learning, 2002.
(fTK153. K89 2002)
RISK management and insurance. Scott E. Harrington,
Gregory R. Niehaus. 2nd ed. Boston: McGraw – Hill/Irwin,
2004. (HG8054.5. H311 2004) W ith more than twice as many exercises and
examples, this 2nd edition of Mathematics for Electricity
and Electronics equips future electronics technicians/
T his second edition of Risk Management and Insurance
continues its innovative approach that instructors embraced in
technologists with an understanding of essential algebra
and trigonometry principles while it sharpens their
the first edition – providing readers with a broad perspective ability to think quantitatively, predict results accurately,
of risk management and a conceptual framework for making and troubleshoot effectively. Complete with the latest
risk management and insurance decisions to increase business ideas and technologies, this edition features expanded
value and individual welfare. This text also enhances the coverage of basic arithmetic and algebra, earlier
ability of students to think critically and analytically to solve introduction of calculator examples, extensive discussion
real business problems. In addition to focusing on these of DC and AC fundamentals, and all-new chapter on
goals, this edition presents broadened coverage of personal statistics.
risk management and corporate risk management issues,
making this text more flexible for principles of insurance,
risk management and insurance, or corporate risk
management courses.
HOUSING and planning year book 2003. London: FT
Prentice Hall
( rHD7999.A3H842)
DIRECTORY of timber trade Malaysia 2003-2004.
Seri Kembangan: Malaysian Timber Industry Board,
T he information contained in this Housing and Planning
2003. (rHD9766.M2M241)
A
Year Book is divided into two main categories: services
offered by statutory bodies – central government offices and s in the previous issues, this 16th edition of Direc-
local authority housing and planning departments, and tory of Timber Trade Malaysia 2003 contains researched
services offered by non-statutory organizations – housing and updated information under the headings: Malaysian
advisory bodies, housing associations, major builders, Timber Industry Board, Forestry & Infrastructure,
professional associations and other allied organizations. Timber Trade Associations, Useful Contacts, General
The book has therefore been split into two parts to reflect Information and Listings of Companies. This Directory
these different services. provides a handy research and promotional tool to touch
base with the timber industry in Malaysia, as well as to
explore and nurture business potential worldwide.
MIDAS Bulletin Jil.32, Bil. 2 & 3, Apr-Jun & Jul-Sep 2004 4
5. NANOELECTRONICS and information technology:
advanced electronic materials and novel devices.
Waser, Rainer, ed. Weinheim: Wiley-VCH, 2003.
BIOPHARMACEUTICALS: biochemistry and (T174.7.N187 2003 f )
biotechnology. Walsh, Gary. 2nd ed. Whitehouse Station: John
Wiley & Sons, Ltd., 2003. (RS380.W224 2003)
P roviding an introduction to electronic materials and
P rovides a current overview of the science and applications
of biopharmaceutical products. Discusses the latest
device concepts for the major areas of current and future
information technology, the value of this book lies in its
focus on the underlying principles. Illustrated by
developments and presents a greater focus on actual contemporary examples, these basic principles will hold,
commercial products and how they are manufactured. Includes despite the rapid developments in this field, especially
new information on biopharmaceutical drug delivery and how emphasizing nanoelectronics. There is hardly any field
genomics impact the industry. where the links between basic science and application are
tighter than in nanoelectronics & information technology.
As an example, the design of resonant tunneling
transistors, single electron devices or molecular electronic
structures is simply inconceivable without delving deep
into quantum mechanics.
The ETHICS of information technology and business.
De George, Richard T. Malden: Blackwell Publishing, 2003.
(HF5387.D318 2003) CHEMISTRY of the environment. Spiro, Thomas G.,
Stigliani, William M. 2nd ed. Upper Saddle River: Pren-
tice Hall, 2003. (TD193.S759 2003)
T he book explores a wide range of topics, including
marketing, privacy and the protection of personal information;
employees and communication privacy; intellectual property
T his book covers topics such as energy flows,
supplies, fossil fuel, nuclear and renewable energy, and
issues; the ethical issues of e-business; Internet-related
energy utilization; the greenhouse effect; climate
business ethics problems; and the ethical dimension of
modeling; chemistry of the ozone layer; air pollution;
information technology on society.
redox potential and water pollution; toxic chemicals; and
acid rain. Featuring an unsurpassed marriage of chemical
principles with issues of environmental concern, this
book is unrivaled in terms of its ability to explain the
chemistry behind the headlines.
MIDAS Bulletin Jil.32, Bil. 2 & 3, Apr-Jun & Jul-Sep 2004 5
6. ORGANOMETALLIC compounds in the environment. MICROSCOPIC techniques in biotechnology. Hoppert,
Craig, P.J., ed. 2nd ed. West Sussex: John Wiley & Sons, Michael. Weinheim: WileyVCH, 2003.
Inc., 2003. (QD411.R467 2003) (QH207.H798 2003)
T he Second Edition of Organometallic Compounds in
the Environment covers all the recent developments in
T ext discusses representative examples of biological
material to be investigated in the context of biotechnology,
analytical techniques and reports all the new work that has
and provides instructions for their preparation. Discusses
been achieved since the first book.
imaging by application of electron microscopy, and
• Covers the general importance and characteristics of
describes specialized approaches of imaging.
organometallic species.
• Includes general developments in analytical techniques.
• Discusses several minority elements including
antimony and selenium.
STATISTICAL process control and quality
improvement. Smith, Gerald M. 5th ed. Upper Saddle
River: Pearson Prentice Hall, 2003. (TS156.8.S648 2004)
T his “mathematics-friendly” volume introduces readers
to basic concepts and applications of Statistical Process
BIOTECHNOLOGY and biopharmaceuticals: Control (SPC). Readers get a solid foundation in control
transforming proteins and genes into drugs. Ho, Rodney charts—including setting scales, charting, interpreting, and
J.Y. & Gibaldi, Milo. Whitehouse Station: John Wiley & analyzing process capability. Problem-solving techniques
Sons, Ltd., 2003. (RS380.H678 2003) are emphasized, and all learning is linked to the
implementation of SPC in the workplace. The volume offers
F ocuses on the role biotechnology plays in the discovery
and development of therapeutic drugs. Discusses the process
an introduction to quality concepts and statistical process
control, quality issues, variation and statistics, an
introduction to tables, charts, and graphs, probability and the
of transforming a macromolecule into a therapeutic agent normal distribution, control charts, variables charts for
and examines each class of macromolecules with respect to limited data, attributes control charts, problem solving,
its physiological role and clinical application. gauge capability and acceptance sampling.
MIDAS Bulletin Jil.32, Bil. 2 & 3, Apr-Jun & Jul-Sep 2004 6
7. MAKLUMAT PENYELIDIKAN DARI USM
RESEARCH INFORMATION FROM USM
CHITOSAN: A NATURAL BIOPOLYMER FOR THE ADSORPTION OF RESIDUE OIL FROM OILY
WASTEWATER
A.L. Ahmad, S. Sumathi and B.H. Hameed
School of Chemical Engineering
USM Engineering Campus
ABSTRACT
Citosan, polyß-(1,4)-2-acetamido-2-deoxy-D-glucose (N-deacetylated) was used as an adsorbent to adsorb the excess oil
from oily wastewater. Chitosan is a biodegradable cationic biopolymer achieved by the extensive deacetylation of chitin
obtained from prawn shell waste. Palm oil mill effluent (POME) is one of the major problematic oily wastewaters in
Malaysia. Preliminary analysis showed that POME contains ca. 2000 mg/l residue oil. A bench scale study of the adsorption
by chitosan of residue oil in POME was conducted using jar test apparatus. Effects of experimental parameters such as the
dosage of chitosan in powder and flake form, contact time, mixing rate, settling time and pH were studied in order to obtain
the optimum conditions for the adsorption of residue oil from POME. The results obtained showed that chitosan powder at a
dosage of 0.5 g/l and employing a contact time of 15 min, a mixing rate of 100 rpm, sedimentation for 30 min and a pH value
of 5.0 provided the most suitable conditions for the removal of residue oil from POME. The removal efficiencies obtained
were ca. 97-99%. FT-IR spectra and SEM micrographs of chitosan before and after adsorption were presented to prove that
the residue oil had been adsorbed by chitosan.
REMOVAL OF HEAVY METAL IN INDUSTRIAL WASTEWATER BY COAGULATION METHOD
Teng Tjoon Tow
School of Industrial Technology
USM Main Campus
ABSTRACT
A feasibility study using hydroxide precipitation and coagulation-flocculation for the treatment of wastewater containing
heavy metals such as lead and zinc has been carried out. Concentrations of heavy metals in the wastewater range from 1-7
mg/L for lead and 3-150 mg/L for zinc. Aluminum sulfate (alum), polyaluminium chloride (PAC) and magnesium chloride
(MgC12) have been used as coagulants to investigate the effectiveness of the coagulation method for the removal of
individual heavy metals in the synthetic wastewater. Parameters such as pH, types of coagulants, coagulant dosages and the
effect of coagulant aid dosages on the flocs settling time have been studied. The effect of pH on the solubility of metals has
also been studied. Jar tests were conducted to determine the optimal operating conditions. Alum, PAC and MgC12 of
concentrations 1200 mg/L, 150 mg/L and 200 mg/L can achieve up to 99% removal for Pb concentration of 7 mg/L in a pH
range of 6.5-7.8, 8.1-8.9 and 9.7-10.9 respectively. Individual Zn with concentrations below 90 mg/L can be removed by
precipitation method. Beyond 90 mg/L, coagulation method is needed in order to remove Zn from the wastewater effectively.
TURBULENCE MODELS FOR HEAT TRANSFER IN BOUNDARY LAYER FLOWS
Nawaf H. Saeid and Mohd Z. Abdullah
School of Mechanical Engineering
USM Engineering Campus
ABSTRACT
A new near wall differential turbulence model is introduced for velocity and thermal fields in the boundary layer flows in the
present project. The new model takes into account the asymptotic behavior of turbulent scales near the wall region and for
free turbulence region using the composite time scale. For the velocity field the Kolmogorov turbulent time scale is
introduced as a lower limit. The developed model for the velocity field is used for modeling the turbulent heat transfer in the
turbulent boundary layer flows. Predictions of the new models (for velocity and thermal fields) are compared with
experimental data, with encouraging improvement in results. The new models are published in four research papers.
MIDAS Bulletin Jil.32, Bil. 2 & 3, Apr-Jun & Jul-Sep 2004 7
8. PHYTOCHEMICAL AND BIOLOGICAL STUDY OF MELASTOMA MALABATHRICUM L., A LOCAL PLANT
USED IN TRADITIONAL MEDICINE
Wong Keng Chong, Boey Peng Lim and Dafaalla Mohamed Hag Ali
School of Chemical Sciences
USM Main Campus
ABSTRACT
The aqueous methanolic extracts of the leaves and flowers of Melastoma malabthricum were separately partitioned with
solvents and chromatographed on silica gel and sephadex LH20 columns. Three urs-12-ene triterpenoids, viz. ursolic acid, 2
a-hydroxyursolic acid and asiatic acid, along with ß-sitosterol 3-O-ß-D-galactopyranoside, glycerol 1,2-dilinolenyl-3-O-ß-D-
galactopyranoside and glycerol 1,2-dilinolenyl-3-O-(4,6-di-O-isopropylidene)-ß-D-galactopyranoside were isolated from the
leaves. The presence of three olean-12-ene triterpenoids, the isomers of the three aforementioned urs-12-ene triterpenoids,
was indicated from 13C-NMR evidence. The ethyl acetate soluble part from the flower extract yielded ellagic acid and six
flavonoids which were identified as quercetin, kaempferol, kaempferol 3-O-a-L-rhamnopyranoside, kaempferol 3-O-ß-D-
glucopyranoside, kaempferol 3-O-ß-D-galactopyranoside and kaempferol 3-O-(2”, 6”-di-O-E-p-coumaryl)-ß-D-
galactopyranoside. The last compound is an uncommon natural product, previously reported only once from a plant. Both
the extracts and some of the fractions showed antibacterial activity. Regarding the pure components, asiatic acid from the
leaves was active towards Bacillus subtilis and Staphylococcus aureus while ellagic acid, quercetin and kaempferol isolated
from the flowers were the most potent.
DEVELOPMENT AND PHYSICO-CHEMICAL CHARACTERIZATION OF INSTANT STARCH FROM SAGO
STARCH
Abd. Karim, C.C. Seow and Norziah Mohd. Hani
School of Industrial Technology
USM Main Campus
ABSTRACT
Successful efforts have been made to develop starches that can dissolve in cold/ambient water ( ~25°C). Granular
cold-water soluble (GCWS) starches, developed using corn, waxy corn and tapioca starches, are available commercially. To
further enhance the usage of sago starch in food products, the development of GCWS sago starch was undertaken. In this
study, GCWS sago starch was prepared using alcoholic-alkaline treatments. The native starch was treated with mixtures of
aqueous solutions of ethanol and NaOH at different temperatures to affect the solubility of the starch granules. Response
Surface Methodology (RSM), was employed to study the interactions among three factors(temperature, ethanol concentration
and NaOH concentration) that were found to affect the percentage of cold-water solubility of the GCWS. The low (-1) and
high (+1) levels were set for each factor at 25°C and 35°C, 40% and 60%(w/w) ethanol, and 3M and 4M NaOH. Maximum
cold-water solubility obtained was 83.4± 0.8% using a combination of 30°C, 3.5M and 4M NaOH and 33.2% ethanol. A
higher treatment temperature and NaOH concentration enhanced cold-water solubility whereas a higher percentage of
ethanol decreased it. Paste clarity (measured as % transmittance of a 1% starch solution) was found to be positively
correlated with the degree of cold-water solubility. No Maltese crosses appeared when the GCWS starches prepared from
these treatments were examined under polarized-light microscopy, which indicated changes of crystalline structures.
Size exclusion chromatography analyses of the GCWS starches were identical with those of their native starch counterpart,
which indicated there was no detectable degradation of starch molecules during the preparation. Most of the GCWS starches
displayed higher viscosities and better freeze-thaw stabilities than those of their native starch counterparts.
INFLUENCE OF LIME ON THE DEFORMATION OF MASONRY MORTAR
Badorul Hisham Abu Bakar
School of Civil Engineering
USM Engineering Campus
ABSTRACT
In this investigation, six (6) different mix proportions of masonry mortar were prepared in the form of cubes (100 x 100mm)
and cylinders (265 x 75mm) to assess the base characteristic of strains of masonry mortar, involving shrinkage and creep
which concerned the time-dependent behavior. All specimens were cured in water: 20°C and tested at the age of 7, 14 and
28 days. For creep, the cylinder specimens were loaded at the age of 14 days and shrinkage was started simultaneously.
MIDAS Bulletin Jil.32, Bil 2 & 3, Apr-Jun & Jul-Sep 2004 8
9. The work has been carried out in a controlled room of 20°C and 65% relative humidity, and reading have been obtained
over a period of approximately 70 days. As a result, it was found that the influence of lime content could significantly
effects in long-term deformation due to a change of mortar type, which should be considered in the design.
MOLECULAR MODELING STUDIES OF SOME TANNINS COMPLEXES: AN INSIGHT INTO THEIR
CORROSION INHIBITION PROPERTIES
Rohana Adnan, Marzuki Abdullah and Muhammad Syahren Adzahar
School of Chemistry Sciences
USM Main Campus
ABSTRACT
A theoretical semi empirical study was performed on 4 units of flavanoids mimosa tannin, C15H12O5R1R2 (where
R1=H(Resorcinol) R1=Phlorogucinol, R2=H(Pyrocatechol) and R2=OH(Pyrogallol) employing AM1 and PM3 method
available on Hyperchem Version 7.0 program. This study showed tannin with R1=OH and R2=OH was more stable
compared to the others. Both methods also consistently produced a lowest after optimization energy and the smallest
ELUMO-HOMO for this combination. Total energy and ELUMO-HOMO for this structure using PM3 method was -93366.90
kcal/mol and -9.050287 kcal/mol respectively. For AM1 method, the values were -100462.5 kcal/mol for total energy and
-9.036746 kcal/mol for ELUMO-HOMO. Furthermore, a similar study was performed on the ferric-tannate complex to
understand the parameters that stabilize the complex. This study showed, the addition 2 water molecules lowered the total
energy by -15062.1 kcal/mol. The ELUMO-HUMO was also further lowered to -3.19554 kcal/mol when compared to the
structure without any water molecules, -2.75331. This finding had clearly shown that H2O molecules played an important
role in stabilizing the complex. The stability was assumed to be due to the water molecules making hydrogen bonding with
4 oxygen atoms from tannin, which are directly connected to Fe. This study also proposed dative covalent bonding between
Fe and 2 oxygen atoms from the water molecules. The complexation together with the presence of two water molecules
had induced great change to the structure especially to the geometries around oxygen-Fe, which seems to be the cause for
the lower energy produced.
SYSTEMATIC RELIABILITY-BASED ENVIRONMENTAL DESIGN OF EROSION FOR EFFICIENT
ENGINEERED LANDSCAPE PROFILING
Eric K.H. Goh and B. White
School of Material and Mineral Resources Engineering
USM Engineering Campus
ABSTRACT
Evolving environmental legislation has received increased attention worldwide in the last two decades (Bradfield, Schultz
and Stone, 1996). The focus of concern by the industry, environmental regulatory agencies and members of the public is
the potential impacts associated with unstable landscapes which sometimes lead to slope failures, especially in hillside
development. Engineered landscape profiles, though stable at the end of construction, may deteriorate over time due to
erosion. There is thus a need to increase the base of knowledge on the existing practices of engineered profile design,
hillside development, reshaping practices and erosion control. With escalating production costs and the keen
competitiveness in the industry world-wide, the necessity to increase the efficiency of engineered profile development is
further gaining prominence. This paper reviews the advancement of erosion management research in the industry,
economics of landscape profiling, the practical application of the Point Estimate probabilistic technique and the optimum
design selection for the systematic planning and reshaping of engineered landscape profiles. The probabilistic engineering
design erosion monographs developed is useful in determining and illustrating quantitatively the reliability of final
engineered landscape designs and the reshaping costs involved for different soil texture types. Landscape designs, which
meet environmentally acceptable levels of reliability against erosion failure at optimum earthmoving reshaping costs, can
be obtained using this probabilistic engineering design approach whilst satisfying environmental standards and community
expectations for erosion minimisation.
MIDAS Bulletin Jil.32, Bil. 2 & 3, Apr-Jun & Jul-Sep 2004 9
10. ANTI-CORROSIVE PERFORMANCE OF WASH PRIMER BASED ON MANGROVE TANNIN
Mohd. Jain Kassim, Afidah Abdul Rahim and Mohd Azman Ismail
School of Chemical Sciences
USM Main Campus
ABSTRACT
Aqueous acetone extract from bark of Rhizophora appiculata or locally known as “bakau minyak” was tested for anti-
corrosive properties by incorporating the powdered extract in wash primer formulation. The anti-corrosive behavior of steel
panels treated with water-based formulations was assessed employing salt spray accelerated test (ASTM B 117) in compari-
son with the standard chromated wash primer. The results indicated that the wash primer formulated solely with tannin as an
anti-corrosive agent showed significant anti-corrosive properties in reducing the corrosion of steel. However, the fully
tannin-based wash primer showed an inferior performance compared to the chromated primer. On the other hand the
superior performance of the tannin-based wash primer had been achieved by a mixture of tannin with zinc phosphate in the
ratio of 1:3. The anti-corrosive properties of the mangrove bark extracts seem to be related to the tannin which are capable of
chelating with Fe3→ giving a highly stable and insoluble ferric-tannate complexes. The tannin in the wash primer may act as
Fe3→ scavengers that converts the ferric ions into ferric-tannate which inhibited the diffusion of dissolved oxygen to
underlying steel.
DEVELOPMENT OF INORGANIC MEMBRANE TO REMOVE OIL EMULSIFIER FROM DOMESTIC
WASTEWATER
Ghasem D. Najafpour and Latif Ahmad
School of Chemical Engineering
USM Engineering Campus
ABSTRACT
The rapid development of membranes in wastewater treatment was a great encouragement to participate and fabricate
inorganic membrane. The results yielded to an expansion of knowledge and producing various types of ceramic membrane.
The ceramic membrane has a great potential and market, ceramic membrane represents a distinct class of inorganic
membranes, especially the metallic coated has many industrial application. The porous ceramic was prepared for to fabricate
the supported membrane. A thin film of Aluminum and Zirconium were formed. Unsupported membrane was also prepared.
The sol-gel is one of the most useful techniques for preparation of inorganic membrane with fine pores in the nanometer
range (1-5 nm). The sol is a stable suspension of colloidal solid particles within soft uniform solution. The gel was obtained
based of hydolysis process with open reflux in 24 hours at 85-90°C. The advantage of sol-gel technology is the ability to
produce highly pure γ-alumina and zirconia membrane at medium temperature about 700°C with uniform pore size
distribution in a thin film. However, there are disadvantages as sensitivity to heat treatment resulted in cracks on the film
layer. There were successful crack free products, but needed special care and time for suitable heat curing, only
γ-alumina membrane has the disadvantage of a poor chemical and thermal stability. There was not any opportunity to carry
heat treatment at very high temperature above 700°C, where at 900°C, it was expected the transformation of γ-alumina from
γ→θ→α- alumina may take place. The successful coated on supported membrane product was obtained using ZrO2.
In this research project, zirconia-coated- γ-alumina membrane coated on ceramic support was developed with
implementation of sol-gel technique. The technique will obtain the crack free unsupported membrane, which was expected
to have pore size of 1-2nm. The developed crack free membrane in the above section will not have the same strength without
the support. The next stage of this work was to carry characterization.
MIDAS Bulletin Jil.32, Bil. 2 & 3, Apr-Jun & Jul-Sep 2004 10
11. PERKHIDMATAN KESEDARAN KINI /
CURRENT AWARENESS SERVICE
ADHESIVES
1) BONDING of vulcanized rubber to polyester cord using RFL adhesives modified with chlororesorcinolic resin.
Hamed, G.R. and Ruksakulpiwat, C. Journal of applied polymer science. 2004: 91(3), 1993-1996.
2) WATER-soluble/dispersible cationic pressure-sensitive adhesives. II. Adhesives from emulsion polymerization.
Yan, Zegui, et al. Journal of applied polymer science. 2004: 91(1), 347-353.
AGRICULTURE
3) ARSENIC behavior in paddy fields during the cycle of flooded and non-flooded periods. Takahashi, Yoshio, et al.
Environmental science & technology. 2004: 38(4), 1038-1044.
4) RIGHTS to forest products, deforestation and smallholder income: Evidence from the Western Brazilian Amazon.
Vosti, Stephen A. et al. World development. 2003: 31(11), 1889-1901.
5) SUSTAINABILITY analysis of ecological and conventional agricultural systems in Bangladesh. Golam Rasul and
Thapa, Gopal A. World development. 2003: 31(10), 1721-1741.
6) SUSTAINABILITY of income through beekeeping under rubber plantations in India: The case study of a rubber
producers’ society. Veeraputhran, S., et al. The planter. 2004: 80(937), 215-223.
BANKS AND BANKING
7) HOW islamic banks deal with bad loans. Saiful Azhar Rosly. Investors digest. 2004: Feb. 24-25.
8) The CREDITS card that only works if you talk to it. Boston, C.B. New scientist. 2004: 182(2444), 23.
9) A FOOT in the door. Investors digest. 2004: Mid-March 12-13.
BEVERAGES
10) ORANGE juice processing. Clark, J. Peter. Food technology. 2003: 57(12), 50-51.
BIOTECHNOLOGY
11) CLONED cells today. Where tomorrow ? Westphal, S.P. and Settle, P.O. New scientist. 2004: 181(2435), 6-7.
CHEMICALS AND CHEMISTRY
12) The DESIGN of functional DNA-binding proteins based on zinc finger domains. Jantz, Derek, et al. Chemical
reviews. 2004: 104(2), 789-799.
13) METALLOTHIONEINS: Zinc, cadmium, mercury, and copper thiolates and selenolates mimicking protein active
site features – structural aspects and biological implications. Henker, Gerald and Krebs, Bernt. Chemical reviews.
2004: 104(2), 801-824.
14) PHENAZINE natural products: Biosynthesis, synthetic analogues, and biological activity. Laursen, Jane Buus and
Nielsen, John. Chemical reviews. 2004: 104(3), 1687-1716.
COMPUTER AND ELECTRONICS
15) BATTLE looms over recordable DVDS. Fox, B. New scientist. 2004: 182(2441), 24.
16) BROADBAND web link goes wireless. Ananthaswamy, A. New scientist. 2004: 182(2443), 24.
17) COMPACT fuel cells may oust feeble batteries. Graham-Rowe, D. New scientist. 2004: 181(2437), 23.
18) COMPUTER, print me a fuel pump. Mullins, J. New scientist. 2004: 181(2437), 26.
19) ELECTRONIC circuit ‘evolves’ from liquid crystals. Graham-Rowe, D. New scientist. 2004: 181(2440), 21.
20) IS blast from the past answer to Wi-Fi woes ? Fox, B. New scientist. 2004: 182(2449), 23.
21) The LOOMING legal threat to Wi-Fi. Dvorak, J.C. PC Magazine. 2004: 23(8), 63.
22) LOST? Send snap and SOS to... Randerson, J. New scientist. 2004: 182(2442), 23.
23) On TECHNOLOGY. Howard, B. PC Magazine. 2004: 23(3), 55.
24) SPONTANEOUS networks will speed net access. Ananthaswamy, A. New scientist. 2004: 181(2432), 22-23.
25) TAKING care of small business. Janowski, D.D. and Kaven, O. PC Magazine. 2004: 23(2), 121-132.
MIDAS Bulletin Jil.32, Bil 2 & 3, Apr-Jun & Jul-Sep 2004 11
12. CONSTRUCTION INDUSTRY
26) A DIFFERENT approach to construction labour in Turkey: Comparative productivity analysis. Kazaz, Aynur and
Ulubeyli, Serdar. Building and environment. 2004: 39(1), 93-100.
27) RISK analysis in fixed-price design-build construction projects. Oztas, Ahmet and Okmen, Onder. Building and
environment. 2004: 39(2), 229-237.
28) VERSATILE tools. Sleight, C. International construction. 2004: 43(3), 43-46.
29) WORLD outlook. International construction. 2004: 43(2), 12-13.
DAIRY
30) DEVELOPMENT of new method, based on a bioreactor coupled with an l-lactate biosensor, toward determination
of a nonspecific inhibition of l-lactic acid production during milk fermertation. Zaydan, R. et al. Journal of
agricultural food chemistry. 2004: 52(1), 8-14.
31) ON-LINE multisensor monitoring of yogurt and filmjolk fermentations on production scale. Navratil, M. et al.
Journal of agricultural food chemistry. 2004: 52(3), 505-510.
ENERGY SOURCES
32) BE a power broker in your own home. Hamer, M. New scientist. 2004: 181(2434), 24.
33) MORE energy from hot stacks. Homles, B. New scientist. 2004: 182(2449), 21.
34) POWER of the midday sun. Pearce, F. New scientist. 2004: 182(2442), 26.
35) POWER play. Graham-Rowe, D. New scientist. 2004: 182(2447): 24-27.
ENVIRONMENTAL PROTECTION
36) A CHEMICAL engineer’s guide to toxicology. Sweeney, Lisa M. Chemical engineering progress. 2004: 100(6),
36-40.
37) TOLERANCE: A useful biological parameter for identifying contaminated sites. Otitoloju, A.A. and Are, T.A.
Bulletin of environmental contamination and toxicology. 2003: 71(6), 1139-1144.
FOOD – FISH AND MARINE PRODUCTS
38) INCORPORATION and stabilization of omega-3 fatty acids in surimi made from cod, gadus morhua. Park, Y. et
al. Journal of agricultural food chemistry. 2004: 52(3), 597-601.
39) USE of dairy proteins and microbial transglutaminase to obtain low-salt fish products from filleting waste from
silver carp (Hypophthalmichthys molitrix). Uresti, Rocio M., et al. Food chemistry. 2004: 86(2), 257-262.
40) WHALES, seals or men in boats. Who took all the fish? Homles, B. New scientist. 2004: 182(2447), 6-7.
FOOD – FRUITS, VEGETABLES AND NUTS
41) EFFECT of microwave power level and time on ascorbic acid content, peroxidase activity and color of selected
vegetables. Brewer, M.S. and Begum, S. Journal of food processing and preservation. 2004: 27(6), 411-426.
42) EFFECT of ripeness and postharvest storage on the phenolic profiles of cherries (prunus avium l.). Goncalves, B. et
al. Journal of agricultural food chemistry. 2004: 52(3), 523-530.
43) FRUIT antioxidant activity, ascorbic acid, total phenol, quercetin, and carotene of irwin mango fruits stored at low
temperature after high electric field pretreatment. Shivashankara, K.S., et al. Journal of agricultural and food
chemistry. 2004: 52(5), 1281-1286.
44) INFLUENCE of temperature, modified atmosphere packaging, and heat treatment on aroma compounds in broccoli.
Jacobsson, Annelie, et al. Journal of agricultural and food chemistry. 2004: 52(6), 1607-1614.
45) IRON bioavailability in green leafy vegetables coked in different utensils. Kumari, Mamatha, et al. Food chemist.
2004: 86(2), 217-222.
46) MAJOR flavonoids in grape seeds and skins: Antioxidant capacity of catechin, epicatechin and gallic acid. Yilmaz,
Y. et al. Journal of agricultural food chemistry. 2004: 52(2), 255-260.
47) MARKET basket survey for lead, cadmium, copper, chromium, nickel, and zinc in fruits and vegetables. Parveen,
Z. et al. Bulletin of environmental contamination and toxicology. 2003: 71(6), 1260-1264.
48) A NEW test method for the evaluation of total antioxidant activity of herbal products. Zaporozhets, O.A. et al.
Journal of agricultural food chemistry. 2004: 52(1), 21-25.
FOOD – MEAT PRODUCTS
49) IT’S a meat market. Tudge, C. New scientist. 2004: 181(2438), 19.
MIDAS Bulletin Jil.32, Bil. 2 & 3, Apr-Jun & Jul-Sep 2004 12
13. FOOD ADDITIVES
50) INFLUENCE of aroma compounds on the mechanical properties of pectin gels. Lubbers, Samuel and
Decourcelle, Nicolas. Journal of agricultural and food chemistry. 2004: 52(5), 1277-1280.
51) INFLUENCE of baking conditions and precursor supplementation on the amounts of the antioxidant
pronyl-L-lysine in bakery products. Lindenmeier, M. et al. Journal of agricultural food chemistry. 2004: 52(2),
350-354.
52) INTERACTIONS between lactoglobulin and pectin during in vitro gastric hydrilysis. Nacer, S.A. et al.
Journal of agricultural food chemistry. 2004: 52(2), 355-360.
53) PLOT thickens, as gums add special effects. Pszczola, Donald E. Food technology. 2003: 57(12), 34, 36, 38,
40, 42, 44-47.
FOOD MICROBIOLOGY
54) IDENTIFICATION and synthesis of-heptanehiol, a new flavor compound found in bell peppers. Simian, H. et al.
Journal of agricultural food chemistry. 2004: 52(2), 306-310.
FOOD TECHNOLOGY
55) NANOTECHNOLOGY: A new frontier in food science. Moraru, Carmen I, et al. Food technology. 2003:
57(12), 24-29.
INDUSTRIAL WASTES
56) REMOVAL of chlorophenols using industrial wastes. Jain, Ajay K., et al. Environmental science & technology.
2004: 38(4), 1195-1200.
INFORMATION TECHNOLOGY
57) ANTIVIRUS: Why your antivirus program won’t catch the next week. Seltzer, L. PC Magazine. 2004: 23(10),
114-122.
58) BLUETOOTH headsets vulnerable to hackers. Graham-Rowe, D. New scientist. 2004: 182(2444), 11.
59) DETECTING spam. Gagnon, G. PC Magazine. 2004: 23(8), 72.
60) DNA robot takes its first steps. Hogan, J. New scientist. 2004: 182(2446), 23.
61) EASY E-commerce. Clyman, J. PC Magazine. 2004: 23(7), 137-144.
62) The GARDEN where perfect software grows. Bentley, P. New scientist. 2004: 181(2437), 28-31.
63) The LATEST news, direct to your pc. O’Brien, D. New scientist. 2004: 182(2449), 24.
64) PROGRAMS that put your personal detail at risk. Biever, C. New scientist. 2004: 182(2450), 13.
65) The RIGHT connections. Ean, O.G. Investors digest. Mid-May 2004: 4-12.
66) SEARCH engine mania. Dvorak, J.C. PC Magazine. 2004: 23(7), 49.
67) SECURE signature means no one can steal your ID. Graham-Rowe, D. New scientist. 2004: 182(2448), 23.
68) TAKE a meeting online. Erlanger, L. PC Magazine. 2004: 23(1), 118-127.
69) WI-fi networking: Rated “G” for everyone. Ellison, Craig. PC magazine. 2004: 23(9), 84-87.
MACHINERY AND EQUIPMENT
70) TOUGH tools. International construction. 2004: 43(2), 34-35.
MANAGEMENT
71) COOPERATION, competition, and team performance: Toward a contingency approach. Beersma, Bianca, et al.
Academy of management journal. 2003: 46(5), 572-590.
72) LEADERSHIP: The skill most needed. Proctor, Stanley I. Chemical engineering progress. 2004: 100(6),
52-56.
73) STRATEGIC human resource practices, top management team social networks, and firm performance:
The role of human resource practices in creating organizational competitive advantage. Collins, Christopher J.
and Clark, Kevin D. Academy of management journal. 2003: 46(6), 740-751.
MARKETING AND TRADE
74) AMWAY shows the way. Investors digest. Mid-May 2004: 21-22.
MIDAS Bulletin Jil.32 Bil 2 & 3, Apr-Jun & Jul-Sep 2004 13
14. MATERIALS ENGINEERING
75) MICRO-sculptures give metal the Velcro touch. Fox, B. New scientist. 2004: 182(2447), 21.
76) NANOTREES take circuits into another dimension. Ananthaswamy, A. New scientist. 2004: 182(2446), 21.
MEDICINAL PLANTS
77) NO remedy in sight for herbal ransack. Edwards, R. New scientist. 2004: 181(2429) 10-11.
78) CHANGES in neutral and malonyl ginsenosides in American ginseng (Panax quinquefolium) during drying,
storage and ethanolic extraction. Du, X.W. et al. Food chemistry. 2004: 86(2), 155-159.
OFFICE AND BUSINESS BUILDING
79) CLIMATE models for the assessment of office buildings energy performance. Gugliermetti, F., et al.
Building and environment. 2004: 39(1), 39-50.
80) A FIELD study on determination of carbon monoxide level and thermal environment in an underground car park.
Ho, J.C., et al. Building and environment. 2004: 39(1), 67-75.
81) WEATHERABILITY of coated fabrics as roofing material in tropical environment. Abdul Razak, H., et al.
Building and environment. 2003: 39(1), 87-92.
PACKAGING
82) “NANO, nano” food packaging technology. Bordy, Aaron L. Food technology. 2003: 57(12), 52-54.
83) COMPRESSION and injection molding wrestle for closures. Defosse, M. Modern plastics. 2004: 34(2), 34-36.
84) WRAPPERS smarten up to protect food. Kleiner, K. New scientist. 2004: 182(2444), 26.
PAINTS AND COATING
85) DRY-peelable temporary protective coatings from waterborne self-crosslinkable sulfourethane-silanol dispersions.
Lewandowski, Kevin, et al. Journal of applied polymer science. 2004: 91(3), 1443-1449.
86) SMOG-BUSTING paint will be a breath of fresh air. Hogan, J. New scientist. 2004: 181(2433), 23.
87) THERMAL stability and dynamic mechanical behavior of acrylic resin and acrylic melamine coatings.
Chattopadhyay, D.K., et al. Journal of applied polymer science. 2004: 91(1), 27-34.
PALM OIL
88) EFFECTS of chemical interesterification on physicochemical properties of palm stearin and palm kernel olein
blends. Norizzah, A.R. et al. Food chemistry. 2004: 86(2), 229-235.
89) MATCHING avrami indices achieves similar hardnesses in palm oil-based fats. Singh, Anand P., et al.
Journal of agricultural and food chemistry. 2004: 52(6), 1551-1557.
90) SEASONAL variation in oil palm fruit bunch production: Its origins and extent. Henson, Ian E. and
Mohd Haniff Harun. The Planter. 2004: 80(937), 201-212.
PHARMACEUTICALS
91) ASTHMA linked to use of antibiotics. Randerson, J. New scientist. 2004: 182(2450), 13.
92) BAN on herbal pill. New scientist. 2004: 181(2429), 6.
93) A HEALTH fad that’s hard swallow. Coghlan, A. New scientist. 2004: 182(2442), 6-7.
94) NATIVE medicines-who should profit ? Leahy, S. New scientist. 2004: 181(2436) 15.
95) NOWHERE to hide. Cohen, P. New scientist. 2004: 182(2441), 34-39.
PLASTICS AND POLYMERS
96) COMPARISON of Ziegler-Natta and metallocene ethylene elastomer products. Harrington, Bruce A. and
Williams, M. Glenn. Rubber world. 2004: 230(2), 20-21, 24-26.
97) EFFECTS of a new compatibilizer system on the flexural properties of wood-polyethylene composites.
Geng, Y., et al. Journal of applied polymer science. 2004: 91(6), 3667-3672.
98) NEXT generation EPDMs for auto, wire and cable. Annicelli, Ralph A. Rubber world. 2004: 229(5), 15-17.
99) STUDY of poly(trimethylene terephthalate) as an engineering thermoplastics material. Zhang, Jialiang.
Journal of applied polymer science. 2004: 91(3), 1657-1666.
100) THERMOPLASTIC biopolyester natural fiber composites. Shanks, R.A., et al.
Journal of applied polymer science. 2004: 91(4), 2114-2121.
MIDAS Bulletin Jil.32, Bil 2 & 3, Apr-Jun & Jul-Sep 2004 14
15. PACKAGING
99) BOOMING bag trade bites Western processors. Colvin, Robert. Modern plastics international. 2004:
34(1), 36.
100) BREAKING into medical films. Schut, Jan H. Plastics technology. 2003: 49(11), 48-53.
101) COMPETITION coming for dual- ovenable packs. Defosse, M. Modern plastics international. 2003:
33(1), 30-31.
102) DETECTION of aluminium residue in sauces packaged in aluminium pouches. Joshi, S.P., et al.
Food chemistry. 2003: 83(3), 383-386.
103) ENVIRONMENTALLY friendly barrier coating moves to packaging. Colvin, Robert. Modern plastics
international. 2003: 33(12), 29.
104) FLEXIBLE packaging looks for competitive edge. Colvin, Robert. Modern plastics international. 2004:
34(1), 21.
105) INTEGRATED plastic bottle making/packing systems. Brody, Aaron L. Food technology. 2003: 57(10),
83-84.
106) INVESTIGATION of packaging systems for shelled walnuts based on oxygen absorbers. Jensen,
Pernille N., et al. Journal of agricultural and food chemistry. 2003: 15(17), 4941-4947.
107) PLASMA coating puts PET beer bottles on the map. British plastics & rubber. 2003: Oct., 29.
108) The ROLE of packaging film permselectivity in modified atmosphere packaging. Al-Ati, Tareq and Hotchkiss,
Joseph H. Journal of agricultural and food chemistry. 2003: 51(14), 4133-4138.
109) STAND up and cheer. Brody, Aaron L. Food technology. 2003: 57(11), 73-75.
110) A WONDERFUL world for aseptic packaging. Brody, Aaron L. Food technology. 2003: 57(5), 92-94.
PAINTS AND COATING
111) PAINTS & coatings: Business has been off this year, but new materials are here – some with astonishing color
effects or outstanding preservative qualities. Reisch, Marc S. Chemical & engineering news. 2003: 81(44),
23-24.
112) RAINBOW in a can: Take chemistry and physics mix generously, and voila! Paint that glitters and sparkles.
Reisch, Marc S. Chemical & engineering news. 2003: 81(44), 25-26, 28.
PEST AND PEST CONTROL
113) DEGRADATION of pesticides in biobeds: The effect of concentration and pesticide mixtures. Fogg, Paul et al.
Journal of agricultural and food chemistry. 2003: 51(18), 5344-5349.
114) MARINE natural products as prototype agrochemical agents. Peng, Jiangnan, et al.
Journal of agricultural and food chemistry. 2003: 51(8), 2246-2252.
PETROCHEMICALS AND PETROLEUM
115) ASSESSMENT of the disposal of radioactive petroleum industry waste in nonhazardous landfills using
risk-based modeling. Smith, Karen P., et al. Environmental science & technology. 2003: 37(10), 2060-2066.
PHARMACEUTICALS
116) BIOCHEMICAL modulation of cisplatin mechanisms of action: Enhancement of antitumor activity and
circumvention of drug resistance. Fuertes, Miguel A., et al. Chemical reviews. 2003: 103(3), 645-662.
117) A BODY repair kit, within hours, from your own blood. Coghlan, Andy. New scientist. 2003: 180(2423), 6-7.
118) FORWARD motion: Indian pharmaceutical producers learn how to better compete in international markets.
Tremblay, Jean-Francois. Chemical & engineering news. 2003: 81(41), 41-42.
119) INTERACTION of a new anesthetic drug richlocain with linear and weakly crosslinked poly-N-
vinylpyrrolidone. Makysh, G. Sh., et al. Journal of applied polymer science. 2003: 89(11), 2977-2981.
120) REDISCOVERING natural products: Cast aside for years, natural products drug discovery appears to be
reclaiming attention and on the verge of a comeback. Rouhi, A. Maureen. Chemical & engineering news.
2003: 81(41), 77-78, 80-84, 86, 88-91.
121) WHAT doesn’t kill you. Martindale, D. New scientist. 2003: 180(2418), 38-41.
PLASTICS AND POLYMERS
122) CONTROLLED synthesis of silicon-containing polymers by metal catalysts. Kawakami, Yusuke, et al.
Polymer international. 2003: 52(10), 1619-1624.
123) DETERMINATION of potential migrants in polycarbonate containers used for microwave ovens by
high-performance liquid chromatography with ultraviolet and fluorescence detection. Nerin, Cristina, et al.
Journal of agricultural and food chemistry. 2003: 51(19), 5647-5653.
MIDAS Bulletin Jil.32, Bil 2 & 3, Apr-Jun & Jul-Sep 2004 15
16. PUBLIC HEALTH
123) ARE nanobacteria alive or just strange crystals? Hogan, J. New scientist. 2004: 182(2448), 6-7.
124) BABY food could trigger meningitis. Randerson, J. New scientist. 2004: 182(2450), 16.
125) BEWARE tap water if you wear contact lenses. Graham-Rowe, Duncan. New scientist. 2004: 181(2429) 15.
RECYCLING
126) ENHANCED toughening of poly(propylene) with reclaimed-tire rubber. Tantayanon, Supawan and Juikham,
Sukunya. Journal of applied polymer science. 2004: 91(1), 510-515.
127) RECYCLING of pharmaceutical waste gelatin for controlled-release applications. I. A 2,4-dicholorphenoxy
acetic acid based system. Kandil, Sherif, et al. Journal of applied polymer science. 2004: 91(4), 2313-2319.
128) STRUCTURAL material from waste plastic. Abdel-Goad, Mahmoud A. –Halim. Journal of applied polymer
science. 2004: 91(4), 2543-2547.
RESEARCH AND DEVELOPMENT
129) FROM tyres to neutrinos. Durrani, M. New scientist. 2004: 182(2443), 36-39.
130) INVENTIVE minds. New scientist. 2004: 182(2443), 46-49.
131) NEW low-cost insulation particleboards from mixture of durian peel and coconut coir. Khedari, Joseh, et al.
Building and environment. 2004: 39(1), 59-65.
132) WHEN science is just another good chase. Rowan-Robinson, M. New scientist. 2004: 181(2436) 18-19.
RUBBER
133) CROSSLINKING and reinforcement of silica/silane-filled rubber compounds. Hasse, Andre, et al. Rubber world.
2004: 230(1), 22-23,26-31.
134) EFFECT of a natural magnesium silicate treated with a new coupling agent on the properties of ethylene-
propylene-diene rubber compounds. Valentin, J. Lopez, et al. Journal of applied polymer science. 2004: 91(3),
1489-1493.
135) MICROHARDNESS studies of PMMA/natural rubber blends. Mina, M.F., et al. Journal of applied polymer
science. 2004: 91(1), 205-210.
136) NEWSPRINT paper waste as a fiber reinforcement in rubber composites. Nashar, D.E.E., et al.
Journal of applied polymer science. 2004: 91(1), 469-478.
137) RUBBER nanocomposites via solution and melt intercalation. Varghese, Siby, et al. Rubber world. 2004:
230(1), 32-38.
138) COOLING impact on rubber mixing. Ghafouri, S.N. Rubber world. 2004: 229(6), 46-50.
TEXTILE INDUSTRY
139) DYEING properties of novel regenerated cellulosic fibers. Koh, Joonseok, et al.
Journal of applied polymer science. 2004: 91(6), 3481-3488.
WATER RESOURCES
140) ESTIMATING exposure to chemical contaminants in drinking water. Kim, Eunyoung, et al.
Environmental science & technology. 2004: 38(6), 1799-1806.
141) MONITORING is the key: Better ambient water quality monitoring will enable us to ensure that resources are
invested wisely to achieve clean, safe water for both humans and wildlife. Mehan, G. Tracy III. Water environment
& technology. 2003: 15(11), 23-27.
142) The THREE George Dam: A look at the world’s largest water resources project. Wang, Rushu and Bryant, Scott.
Water environment & technology. 2003: 15(11), 28-33.
143) TOOLS for future success: Emerging trends that are changing the nature of water quality management. Daigger,
Glen T. Water environment & technology. 2003: 15(12), 38-45.
MIDAS Bulletin Jil.32, Bil 2 & 3, Apr-Jun & Jul-Sep 2004 16
17. All articles in the Current Awareness Service List
are available in the
Universiti Sains Malaysia Library
MIDAS Bulletin Jil.32, Bil 2 & 3, Apr-Jun & Jul-Sep 2004 17
18. PEMBAYARAN FOTOKOPI
Harga bayaran untuk membuat fotokopi bagi ahli MIDAS adalah seperti berikut:
(a) Bayaran minima RM10.00 untuk 10 muka surat pertama.
(b) Bayaran tambahan RM1.00 bagi setiap muka surat seterusnya.
(c) Tiada caj perkhidmatan dikenakan.
Sila alamatkan semua permintaan kepada:
Unit Perkhidmatan MIDAS
Perpustakaan
Universiti Sains Malaysia
11800 USM
Pulau Pinang
Tel.: 04-6533888 ext. 3723 or 3596
Fax: 04-6571526
E-mail: midas@notes.usm.my
PHOTOCOPYING CHARGES
Photocopying charges for MIDAS members are as follows:
(a) Minimum charges of RM10.00 for the first 10 pages.
(b) Additional charge of RM1.00 per page thereafter.
(c) There will be no service charge.
Please address all requests to:
Unit Perkhidmatan MIDAS
Perpustakaan
Universiti Sains Malaysia
11800 USM
Pulau Pinang
Tel.: 04-6533888 ext. 3723 or 3596
Fax: 04-6571526
E-mail: midas@notes.usm.my
MIDAS Bulletin Jil.32, Bil 2 & 3, Apr-Jun & Jul-Sep 2004 18
19. BORANG PERMINTAAN UNTUK
SENARAI PERKHIDMATAN KESEDARAN KINI
REQUEST FORM FOR CURRENT AWARENESS SERVICE LIST
Unit Perkhidmatan MIDAS
Perpustakaan,
Universiti Sains Malaysia
11800 USM,
Pulau Pinang
Sila hantar kepada saya fotokopi bagi perkara-perkara berikut: (Tulis hanya nombor artikel yang dikehendaki
di ruang bawah.)
Please send me the photocopies of the following: (Please state only the article number of the articles
requested in the space below.)
MIDAS Keluaran: Bulan: Tahun:
Bulletin Issue: _____________ Month: ______________ Year: ____________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Saya bersetuju akan membayar harga fotokopi untuk bahan-bahan yang tersebut di atas.
I agree to pay for photocopying charges for the above mentioned materials.
Sila kirim bahan-bahan tersebut serta invoisnya kepada saya.
Please send me the requested materials and invoice.
Tandatangan/Signature: ____________________________________________________________________
Nama/Name: _____________________________________________________________________________
No. Ahli/Membership No.: __________________________________________________________________
Nama Syarikat/Company Name: ______________________________________________________________
Alamat Syarikat/Company Address: ___________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
MIDAS Bulletin Jil.32, Bil 2 & 3, Apr-Jun & Jul-Sep 2004 19
20. KEPADA / TO :
MIDAS
Unit Perkhidmatan MIDAS
Perpustakaan
Universiti Sains Malaysia
MIDAS BULLETIN
Bil.Jil.32, Bil 2 & 3, Apr-Jun & Jul-Sep 2004
Ketua Penyunting / Chief Editor
Che Norma Bahri
Penyunting-penyunting / Editors
Arinawati Ayob
Rizalawati Ayu Abdul Razak
Husriati Hussain
Pembaca Pruf / Proof Reader
A. Basheer Ahamadhu b. Ameer Sultan
Penginput Data / Data input by
Musthapa Ismail
Mahadzer Hj. Mokhtar
Diterbitkan oleh / Published by
Nor Sharmiza Ismail
PERPUSTAKAAN
Reka Letak / Layout UNIVERSITI SAINS MALAYSIA
Mahadzer Hj. Mokhtar 11800 MINDEN
PULAU PINANG
Edaran/Circulation
Kirubananthan a/l Sundaraju
Hasan Sukit