Mesh topology
•
0 likes•20 views
Objective: 1. Mesh topology Background: A mesh topology is a network setup where each computer and network device is interconnected with one another. This topology setup allows for most transmissions to be distributed even if one of the connections goes down. It is a topology commonly used for wireless networks.
Report
Share
Report
Share
Download to read offline
Recommended
Metropolitan area network (man)
Objective:
1. Configuring the MAN connection
Background:
A metropolitan area network (MAN) is a computer network that connects computers within a metropolitan area, which could be a single large city, multiple cities, and towns, or any given large area with multiple buildings. A MAN is larger than a local area network (LAN) but smaller than a wide area network (WAN).
Ring topology
Objective:
1. Ring topology
Background:
A ring topology is a network configuration where device connects by creating a circular data path. Each networked device is connected to two others, like points on a circle. Together, devices in a ring topology are referred to as a ring network. This type of topology is highly efficient and handles heavier loads better than bus topology.
Hybrid topology
A hybrid topology is a type of network topology that uses two or more differing network topologies. These topologies can include a mix of bus topology, mesh topology, ring topology, star topology, and tree topology. Here in this experiment, I have used both Star topology and Bus Topology.
Star topology
Objective:
1. Star topology
Background:
A star topology is a topology for a Local Area Network (LAN) in which all nodes are individually connected to a central connection point, like a hub or a switch. A star takes more cable than e.g. a bus, but the benefit is that if a cable fails, only one node will be brought down. Star topology is also known as a star network.
Bus topology
Background:
Bus topology is a specific kind of network topology in which all of the various devices in the network are connected to a single cable or line. Bus topology is a network setup where each computer and network device is connected to a single cable or backbone. Depending on the type of computer network card, a coaxial cable or an RJ-45 network cable is used to connect them together.
Topology
This document summarizes different network topologies:
- Bus topology connects all nodes to a single backbone cable and messages are broadcast to all nodes. It uses CSMA access method and is mainly used in Ethernet networks.
- Ring topology connects each node to two other nodes in a circular structure. Data travels through all intermediate nodes. Failure of any node causes network failure.
- Tree topology has a root node and other nodes connect hierarchically in groups. It is used in wide area networks and allows easy expansion and management.
- Star topology connects all devices to a central hub. The hub can be passive or active.
- Mesh topology connects every device to every other device through dedicated channels, making it robust
Different types of network topologies
Assignment Name: Different Types of Network Topologies
Department: Computer Science and Engineering
Course Name: Computer Networks
Course Code: CSE 317
Mail server
Objective:
1. Configuring the mail server
Background:
A mail server (or email server) is a computer system that sends and receives email. In many cases, web servers and mail servers are combined in a single machine. However, large ISPs and public email services (such as Gmail and Hotmail) may use dedicated hardware for sending and receiving emails.
Recommended
Metropolitan area network (man)
Objective:
1. Configuring the MAN connection
Background:
A metropolitan area network (MAN) is a computer network that connects computers within a metropolitan area, which could be a single large city, multiple cities, and towns, or any given large area with multiple buildings. A MAN is larger than a local area network (LAN) but smaller than a wide area network (WAN).
Ring topology
Objective:
1. Ring topology
Background:
A ring topology is a network configuration where device connects by creating a circular data path. Each networked device is connected to two others, like points on a circle. Together, devices in a ring topology are referred to as a ring network. This type of topology is highly efficient and handles heavier loads better than bus topology.
Hybrid topology
A hybrid topology is a type of network topology that uses two or more differing network topologies. These topologies can include a mix of bus topology, mesh topology, ring topology, star topology, and tree topology. Here in this experiment, I have used both Star topology and Bus Topology.
Star topology
Objective:
1. Star topology
Background:
A star topology is a topology for a Local Area Network (LAN) in which all nodes are individually connected to a central connection point, like a hub or a switch. A star takes more cable than e.g. a bus, but the benefit is that if a cable fails, only one node will be brought down. Star topology is also known as a star network.
Bus topology
Background:
Bus topology is a specific kind of network topology in which all of the various devices in the network are connected to a single cable or line. Bus topology is a network setup where each computer and network device is connected to a single cable or backbone. Depending on the type of computer network card, a coaxial cable or an RJ-45 network cable is used to connect them together.
Topology
This document summarizes different network topologies:
- Bus topology connects all nodes to a single backbone cable and messages are broadcast to all nodes. It uses CSMA access method and is mainly used in Ethernet networks.
- Ring topology connects each node to two other nodes in a circular structure. Data travels through all intermediate nodes. Failure of any node causes network failure.
- Tree topology has a root node and other nodes connect hierarchically in groups. It is used in wide area networks and allows easy expansion and management.
- Star topology connects all devices to a central hub. The hub can be passive or active.
- Mesh topology connects every device to every other device through dedicated channels, making it robust
Different types of network topologies
Assignment Name: Different Types of Network Topologies
Department: Computer Science and Engineering
Course Name: Computer Networks
Course Code: CSE 317
Mail server
Objective:
1. Configuring the mail server
Background:
A mail server (or email server) is a computer system that sends and receives email. In many cases, web servers and mail servers are combined in a single machine. However, large ISPs and public email services (such as Gmail and Hotmail) may use dedicated hardware for sending and receiving emails.
Introduction to computer networks
This note is about the basic introduction of computer networks. It contains a detailed description of computer network, ARPANET, goals of computer network, application of computer network and details about networking hardware & software components.
Types of network topology
The document discusses different types of network topologies including bus, ring, star, tree, and mesh topologies. It also defines hub, switch, and router components. The key points are:
Bus topology has a main cable that devices connect to via drop lines, but has limits on distance and number of devices. Ring topology forms a circular path between devices but a single failure disrupts the whole network. Star topology uses a central hub that devices connect to for all communications, but a hub failure disables the whole system. Tree topology combines features of bus and star with a central root hub and branching lines to devices. Mesh topology connects every device directly to every other for redundancy but has high cabling costs. Hubs
Network Topology
The document discusses different types of network topologies including physical and logical topologies. It describes common topologies like bus, star, ring, mesh, tree and hybrid topologies. For each topology, it provides details on their advantages and disadvantages. It also discusses network technology, intranet, extranet and internet.
Lab room topology design with dns server
A DNS server is a server that manages the domain name system or DNS protocols, matching Internet domain names and IP addresses. The DNS server may also manage domain resolution services.
Here, I have designed a lab room using different PC and connected them using a Switch, and then connected them with the DNS server. I have used Server0 in PC0 and PC1. However, in PC2 and PC3 I have used Server1.
Network Topology
The document discusses different network topologies including bus, ring, star, tree, mesh, and hybrid topologies. It describes the key characteristics of each topology such as their advantages and disadvantages. It also defines common networking devices like hubs, switches, routers, repeaters, and brouters explaining their basic functions.
Class work3
This document discusses different types of network topologies, including physical and logical topologies. It describes bus, ring, star, mesh, tree, and hybrid topologies. For each topology, it covers features, advantages, and disadvantages. Bus topology has all devices connected to a single cable. Ring topology forms a ring with each device connected to two others. Star topology connects all devices to a central hub. Mesh topology uses point-to-point connections between all devices. Tree topology connects devices in a hierarchical structure below a root node. Hybrid topologies combine two or more topologies.
Types of network topology
This document discusses different types of network topologies including their advantages and disadvantages. It describes bus topology, where all nodes are connected to a single backbone cable, ring topology where nodes are connected in an endless loop, star topology with a central hub, tree topology which combines star and bus, and mesh topology with multiple redundant connections between nodes. The document provides details on how each topology transmits data and concludes by listing common advantages like ease of setup or disadvantages like single point of failure for each network topology type.
Network cable types and specifications
This document provides information on different types of computer network cables, including coaxial cable, twisted pair cable, and fiber optic cable. It describes the components and specifications of coaxial cables like RG-6 and RG-8. It also discusses the categories of twisted pair cables from Cat1 to Cat7 and their uses. Fiber optic cable is described as consisting of a core, cladding, buffer and jacket to transmit data using light pulses.
Osi model and tcpip model.
The document summarizes the OSI model and TCP/IP model. The OSI model has 7 layers (physical, data link, network, transport, session, presentation, application) that define a framework for network architecture. The TCP/IP model has 4 layers (application, transport, internet, network interface) and focuses on data transmission between networked computers. Both models break communication functions into layers to define protocols and network interactions.
Classification of computer networks
This note contains details about the main four classifications of computer networks LAN, PAN, MAN & WAN.
Topology Note
The document discusses different network topologies. It defines topology as the way that links computers in a network. There are two types of topology: physical and logical. Some common topologies discussed are star, ring, bus, tree, mesh, and hybrid. Each topology has advantages and disadvantages related to features like reliability, scalability, installation complexity, and cost. For example, a star topology is easy to install but depends on a central hub, while a mesh provides direct communication between all nodes but is complex and costly to implement.
Dns server
A DNS server is a server that manages the domain name system or DNS protocols, matching Internet domain names and IP addresses. The DNS server may also manage domain resolution services.
Class work2
Course Code: CSE 317 discusses three main types of network cables: coaxial cable, twisted-pair cable, and fiber-optic cable. Coaxial cable uses a central copper conductor surrounded by insulation and shielding, and was first used commercially in the 1940s. Twisted-pair cable uses two insulated copper wires twisted around each other to reduce interference, and comes in unshielded and shielded versions. Fiber-optic cable contains glass cores that transmit data as light pulses and can carry signals hundreds of miles faster than other cables.
Types of Computer Network
This document discusses the four main types of computer networks: local area networks (LANs), personal area networks (PANs), metropolitan area networks (MANs), and wide area networks (WANs). LANs connect computers within a small area like a building using technologies like Ethernet. PANs connect personal devices within 30 feet of an individual. MANs interconnect multiple LANs within a larger area like a city using technologies like Frame Relay. WANs extend over large geographical areas like states or countries using technologies like fiber optic cables and satellites.
OSI and TCP/IP Model
This note is about the introduction of the OSI Model & TCP/IP Model. It contains details of the seven layers of the OSI Model which are Application layer, Presentation Layer, Session Layer, Transport Layer, Network Layer, Data Link Layer, Physical Layer
Networking Cable
Cable is the medium through which information usually moves from one network device to another. There are several types of cable which are commonly used with LANs
Class work 1
This document provides information about various topics related to computer networks:
- It defines hub, switch, router, bridge, and repeater components and their functions.
- It explains transmission modes like simplex, half-duplex, and full-duplex.
- It describes different types of computer networks including LAN, MAN, WAN, and CAN.
- It provides details about IP addressing and IP address classes.
Ring topology
Course Tittle: Computer Networks Theory
Course Code: CSE317
Topics: Ring Topology
Ring topology connects computer nodes in a continuous loop with no terminating ends. Data flows in one direction around the ring using a token passing access method. It has advantages like easy installation and management since only two links need changing to add or remove devices. However, it also has disadvantages like the whole network failing if one node or cable breaks, and communication delays increasing as more nodes are added to the ring.
Star topology
1) The document discusses the star topology for computer networks, where each device connects to a central hub. Communication between devices must go through the hub.
2) Advantages of the star topology include lower costs since each device only needs one connection to the hub, easier installation since each device connects to the hub, and robustness since failure of one link does not disrupt other links.
3) A disadvantage is that if the central hub fails, all connections are lost since the hub is a single point of failure.
Class work4
The document discusses the OSI (Open Systems Interconnection) model, which is a reference model for how applications communicate over a network. It describes the 7 layers of the OSI model from physical to application layer. The physical layer deals with transmitting raw data bits. The data link layer packages data into frames and corrects errors. The network layer routes frames between networks using logical addresses. The transport layer manages data packet delivery and error checking.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
More Related Content
What's hot
Introduction to computer networks
This note is about the basic introduction of computer networks. It contains a detailed description of computer network, ARPANET, goals of computer network, application of computer network and details about networking hardware & software components.
Types of network topology
The document discusses different types of network topologies including bus, ring, star, tree, and mesh topologies. It also defines hub, switch, and router components. The key points are:
Bus topology has a main cable that devices connect to via drop lines, but has limits on distance and number of devices. Ring topology forms a circular path between devices but a single failure disrupts the whole network. Star topology uses a central hub that devices connect to for all communications, but a hub failure disables the whole system. Tree topology combines features of bus and star with a central root hub and branching lines to devices. Mesh topology connects every device directly to every other for redundancy but has high cabling costs. Hubs
Network Topology
The document discusses different types of network topologies including physical and logical topologies. It describes common topologies like bus, star, ring, mesh, tree and hybrid topologies. For each topology, it provides details on their advantages and disadvantages. It also discusses network technology, intranet, extranet and internet.
Lab room topology design with dns server
A DNS server is a server that manages the domain name system or DNS protocols, matching Internet domain names and IP addresses. The DNS server may also manage domain resolution services.
Here, I have designed a lab room using different PC and connected them using a Switch, and then connected them with the DNS server. I have used Server0 in PC0 and PC1. However, in PC2 and PC3 I have used Server1.
Network Topology
The document discusses different network topologies including bus, ring, star, tree, mesh, and hybrid topologies. It describes the key characteristics of each topology such as their advantages and disadvantages. It also defines common networking devices like hubs, switches, routers, repeaters, and brouters explaining their basic functions.
Class work3
This document discusses different types of network topologies, including physical and logical topologies. It describes bus, ring, star, mesh, tree, and hybrid topologies. For each topology, it covers features, advantages, and disadvantages. Bus topology has all devices connected to a single cable. Ring topology forms a ring with each device connected to two others. Star topology connects all devices to a central hub. Mesh topology uses point-to-point connections between all devices. Tree topology connects devices in a hierarchical structure below a root node. Hybrid topologies combine two or more topologies.
Types of network topology
This document discusses different types of network topologies including their advantages and disadvantages. It describes bus topology, where all nodes are connected to a single backbone cable, ring topology where nodes are connected in an endless loop, star topology with a central hub, tree topology which combines star and bus, and mesh topology with multiple redundant connections between nodes. The document provides details on how each topology transmits data and concludes by listing common advantages like ease of setup or disadvantages like single point of failure for each network topology type.
Network cable types and specifications
This document provides information on different types of computer network cables, including coaxial cable, twisted pair cable, and fiber optic cable. It describes the components and specifications of coaxial cables like RG-6 and RG-8. It also discusses the categories of twisted pair cables from Cat1 to Cat7 and their uses. Fiber optic cable is described as consisting of a core, cladding, buffer and jacket to transmit data using light pulses.
Osi model and tcpip model.
The document summarizes the OSI model and TCP/IP model. The OSI model has 7 layers (physical, data link, network, transport, session, presentation, application) that define a framework for network architecture. The TCP/IP model has 4 layers (application, transport, internet, network interface) and focuses on data transmission between networked computers. Both models break communication functions into layers to define protocols and network interactions.
Classification of computer networks
This note contains details about the main four classifications of computer networks LAN, PAN, MAN & WAN.
Topology Note
The document discusses different network topologies. It defines topology as the way that links computers in a network. There are two types of topology: physical and logical. Some common topologies discussed are star, ring, bus, tree, mesh, and hybrid. Each topology has advantages and disadvantages related to features like reliability, scalability, installation complexity, and cost. For example, a star topology is easy to install but depends on a central hub, while a mesh provides direct communication between all nodes but is complex and costly to implement.
Dns server
A DNS server is a server that manages the domain name system or DNS protocols, matching Internet domain names and IP addresses. The DNS server may also manage domain resolution services.
Class work2
Course Code: CSE 317 discusses three main types of network cables: coaxial cable, twisted-pair cable, and fiber-optic cable. Coaxial cable uses a central copper conductor surrounded by insulation and shielding, and was first used commercially in the 1940s. Twisted-pair cable uses two insulated copper wires twisted around each other to reduce interference, and comes in unshielded and shielded versions. Fiber-optic cable contains glass cores that transmit data as light pulses and can carry signals hundreds of miles faster than other cables.
Types of Computer Network
This document discusses the four main types of computer networks: local area networks (LANs), personal area networks (PANs), metropolitan area networks (MANs), and wide area networks (WANs). LANs connect computers within a small area like a building using technologies like Ethernet. PANs connect personal devices within 30 feet of an individual. MANs interconnect multiple LANs within a larger area like a city using technologies like Frame Relay. WANs extend over large geographical areas like states or countries using technologies like fiber optic cables and satellites.
OSI and TCP/IP Model
This note is about the introduction of the OSI Model & TCP/IP Model. It contains details of the seven layers of the OSI Model which are Application layer, Presentation Layer, Session Layer, Transport Layer, Network Layer, Data Link Layer, Physical Layer
Networking Cable
Cable is the medium through which information usually moves from one network device to another. There are several types of cable which are commonly used with LANs
Class work 1
This document provides information about various topics related to computer networks:
- It defines hub, switch, router, bridge, and repeater components and their functions.
- It explains transmission modes like simplex, half-duplex, and full-duplex.
- It describes different types of computer networks including LAN, MAN, WAN, and CAN.
- It provides details about IP addressing and IP address classes.
Ring topology
Course Tittle: Computer Networks Theory
Course Code: CSE317
Topics: Ring Topology
Ring topology connects computer nodes in a continuous loop with no terminating ends. Data flows in one direction around the ring using a token passing access method. It has advantages like easy installation and management since only two links need changing to add or remove devices. However, it also has disadvantages like the whole network failing if one node or cable breaks, and communication delays increasing as more nodes are added to the ring.
Star topology
1) The document discusses the star topology for computer networks, where each device connects to a central hub. Communication between devices must go through the hub.
2) Advantages of the star topology include lower costs since each device only needs one connection to the hub, easier installation since each device connects to the hub, and robustness since failure of one link does not disrupt other links.
3) A disadvantage is that if the central hub fails, all connections are lost since the hub is a single point of failure.
Class work4
The document discusses the OSI (Open Systems Interconnection) model, which is a reference model for how applications communicate over a network. It describes the 7 layers of the OSI model from physical to application layer. The physical layer deals with transmitting raw data bits. The data link layer packages data into frames and corrects errors. The network layer routes frames between networks using logical addresses. The transport layer manages data packet delivery and error checking.
What's hot (20)
Recently uploaded
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
An improved modulation technique suitable for a three level flying capacitor ...
This research paper introduces an innovative modulation technique for controlling a 3-level flying capacitor multilevel inverter (FCMLI), aiming to streamline the modulation process in contrast to conventional methods. The proposed
simplified modulation technique paves the way for more straightforward and
efficient control of multilevel inverters, enabling their widespread adoption and
integration into modern power electronic systems. Through the amalgamation of
sinusoidal pulse width modulation (SPWM) with a high-frequency square wave
pulse, this controlling technique attains energy equilibrium across the coupling
capacitor. The modulation scheme incorporates a simplified switching pattern
and a decreased count of voltage references, thereby simplifying the control
algorithm.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
cnn.pptx Convolutional neural network used for image classication
Convolutional Neural Network used for image classification
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Recently uploaded (20)
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
An improved modulation technique suitable for a three level flying capacitor ...
An improved modulation technique suitable for a three level flying capacitor ...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
cnn.pptx Convolutional neural network used for image classication
cnn.pptx Convolutional neural network used for image classication
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Mesh topology
- 1. City University 13/A, Panthapath, Dhaka – 1215 Assignment Name: Mesh topology Department: Computer Science and Engineering Course Name: Computer Networks Laboratory Course Code: CSE 318 Submission Date: 13.09.2021 Submitted By: Submitted To: Name: Kona Paul ID: 1834902566 Batch: 49th Name: Pranab Bandhu Nath Senior Lecturer Department of CSE City University
- 2. Objective: 1. Mesh topology Background: A mesh topology is a network setup where each computer and network device is interconnected with one another. This topology setup allows for most transmissions to be distributed even if one of the connections goes down. It is a topology commonly used for wireless networks. PC ID IP Address PC4 192.168.10.104 PC5 192.168.10.105 PC6 192.168.10.106 PC7 192.168.10.107