It is easy to do.... I need to do a basic project....Change margin.docxBHANU281672
It is easy to do.... I need to do a basic project....
Change margins, vertical alignment, line spacing, and font and font size, and delete blank lines.
a.
Click the
Margins
button [
Page Layout
tab,
Page Setup
group].
b.
Select
Normal
from the drop-down list.
c.
Click the
Page Setup
launcher to open the
Page Setup
dialog box.
d.
Click the
Layout
tab.
e.
In the
Page
area, change
Vertical alignment
to
Center.
f.
Click
OK
to close the
Page Setup
dialog box.
g.
Press
Ctrl+A
to select the entire document.
h.
Change the font to
Calibri.
i.
Change the font size to
12
pt.
j.
Change the line spacing to
2.0
(Double).
k.
Turn on
Show/Hide
and delete all of the blank lines between the lines of text.
Add text to the document.
a.
Click after "Seller" in the second line of the document and press
Tab
once.
b.
Type Property Address.
c.
Click after "Escrow Company" and press
Tab
once.
d.
Type Escrow #.
e.
Click after "Tasks to be Completed" and press
Tab
once.
f.
Type Date Completed.
Set tab stops using the ruler to line up information.
a.
Select the second and third lines of text (beginning with "Seller").
b.
Ensure that the
Left Tab
is selected in the tab selector area to the left of the horizontal ruler.
c.
Click the ruler at
3.5
". If you click the wrong location on the ruler, drag the tab stop to the correct location (Figure 2-100).
d.
Select the fourth line of text (beginning with "Tasks").
e.
Click to the
tab selector
to change to a center tab stop (Figure 2-101).
f.
Click the ruler at
5.5".
Set tab stops and add leaders to create lines for users to fill in information.
a.
Select the second and third lines of text (beginning with "Seller").
b.
Click the
Paragraph
launcher. The
Paragraph
dialog box opens.
c.
Click the
Tabs
button. The
Tabs
dialog box opens.
d.
In the
Tab stop position
area, type 3.
e.
Click the
Right
radio button in the
Alignment
area.
f.
Click the
4
(solid underline) radio button in the
Leader
area.
g.
Click the
Set
button to set this tab stop.
h.
In the
Tab stop position
area, type 6.5.
i.
Click the
Right
radio button in the
Alignment
area.
j.
Click the
4
(solid underline) radio button in the
Leader
area.
k.
Click the
Set
button to set this tab stop.
l.
Click
OK
to close the
Tabs
dialog box.
Use tab stops to align text.
a.
Place the insertion point before "Property Address" and press
Tab
once.
b.
Click after "Property Address" and press
Tab
once.
c.
Place the insertion point before "Escrow #" and press
Tab
once.
d.
Click after "Escrow #" and press
Tab
once.
Apply styles to selected text and modify a style.
a.
Place the insertion point in the first line of text ("Seller Escrow Checklist").
b.
Select
Title
style in the
Style
gallery [
Home
tab,
Styles
group].
c.
Change the
After
paragraph spacing to
24 pt. [Page Layout tab, Paragraph group].
d.
Click the
Center
alignment button to center the title. ...
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
It is easy to do.... I need to do a basic project....Change margin.docxBHANU281672
It is easy to do.... I need to do a basic project....
Change margins, vertical alignment, line spacing, and font and font size, and delete blank lines.
a.
Click the
Margins
button [
Page Layout
tab,
Page Setup
group].
b.
Select
Normal
from the drop-down list.
c.
Click the
Page Setup
launcher to open the
Page Setup
dialog box.
d.
Click the
Layout
tab.
e.
In the
Page
area, change
Vertical alignment
to
Center.
f.
Click
OK
to close the
Page Setup
dialog box.
g.
Press
Ctrl+A
to select the entire document.
h.
Change the font to
Calibri.
i.
Change the font size to
12
pt.
j.
Change the line spacing to
2.0
(Double).
k.
Turn on
Show/Hide
and delete all of the blank lines between the lines of text.
Add text to the document.
a.
Click after "Seller" in the second line of the document and press
Tab
once.
b.
Type Property Address.
c.
Click after "Escrow Company" and press
Tab
once.
d.
Type Escrow #.
e.
Click after "Tasks to be Completed" and press
Tab
once.
f.
Type Date Completed.
Set tab stops using the ruler to line up information.
a.
Select the second and third lines of text (beginning with "Seller").
b.
Ensure that the
Left Tab
is selected in the tab selector area to the left of the horizontal ruler.
c.
Click the ruler at
3.5
". If you click the wrong location on the ruler, drag the tab stop to the correct location (Figure 2-100).
d.
Select the fourth line of text (beginning with "Tasks").
e.
Click to the
tab selector
to change to a center tab stop (Figure 2-101).
f.
Click the ruler at
5.5".
Set tab stops and add leaders to create lines for users to fill in information.
a.
Select the second and third lines of text (beginning with "Seller").
b.
Click the
Paragraph
launcher. The
Paragraph
dialog box opens.
c.
Click the
Tabs
button. The
Tabs
dialog box opens.
d.
In the
Tab stop position
area, type 3.
e.
Click the
Right
radio button in the
Alignment
area.
f.
Click the
4
(solid underline) radio button in the
Leader
area.
g.
Click the
Set
button to set this tab stop.
h.
In the
Tab stop position
area, type 6.5.
i.
Click the
Right
radio button in the
Alignment
area.
j.
Click the
4
(solid underline) radio button in the
Leader
area.
k.
Click the
Set
button to set this tab stop.
l.
Click
OK
to close the
Tabs
dialog box.
Use tab stops to align text.
a.
Place the insertion point before "Property Address" and press
Tab
once.
b.
Click after "Property Address" and press
Tab
once.
c.
Place the insertion point before "Escrow #" and press
Tab
once.
d.
Click after "Escrow #" and press
Tab
once.
Apply styles to selected text and modify a style.
a.
Place the insertion point in the first line of text ("Seller Escrow Checklist").
b.
Select
Title
style in the
Style
gallery [
Home
tab,
Styles
group].
c.
Change the
After
paragraph spacing to
24 pt. [Page Layout tab, Paragraph group].
d.
Click the
Center
alignment button to center the title. ...
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Word is a full-featured program that provides a wide variety of editing and formatting features and sophisticated visual elements.
You can navigate through this presentation while in Slide Show View. Click on a skill on this slide to advance directly to the related topic slide. To return to this slide, click the Skills button located in the bottom right of any slide. Alternatively, you can advance through the presentation one slide at a time by clicking the Next button. Go back a slide by clicking the Previous button. The Next and Previous buttons are located in the bottom right of any slide.In Section 2 you will learn how to format characters and paragraphs in documents. Word contains a number of commands and procedures that affect how a document appears when printed. The appearance of a document in the document screen and how it looks when printed is called the format. Formatting can include such tasks as changing the font; aligning and indenting text; changing line and paragraph spacing; setting tabs; and inserting elements such as bullets, numbers, symbols, and special characters. You can also improve the readability of a document by setting text in tabbed columns and by formatting using styles.
Formatting a document changes how the document appears. The top row of the Font group contains buttons for changing the font and font size and increasing and decreasing the size of the font. The bottom row of the Font group contains buttons for applying formatting such as bold, italics, underlining, superscript, subscript, and text effects.Click the Clear Formatting button to remove all formatting from selected text. Use options at the Change Case drop-down list to specify the case of selected text. When you click the Text Highlight Color button, the mouse pointer displays with a highlighter pen attached. Highlighting stays on until you click the Text Highlight Color button again. Remove the text highlighting by pressing Ctrl + A (to select the entire document), clicking the Text Highlight Color button arrow, and then clicking No Color at the drop-down list.
Microsoft Word has taken some commonly used commands and placed them on the Mini toolbar displayed on this slide.The toolbar disappears when you move the mouse pointer away from it and when you click a button on the Mini toolbar.
The default font used by Word is Calibri. Change this default with the Font button in the Font group as shown. When you click an option at the drop-down gallery of some commands, a feature referred to as Live Preview provides you with an opportunity to see how the document will appear with text effect formatting before making a final choice.A typeface is a set of characters with a common design and shape and can be decorative or plain and either monospaced or proportional. Word refers to typeface as font. A monospaced typeface allots the same amount of horizontal space for each character while a proportional typeface allots a varying amount of space for each character. Proportional typefaces are divided into two main categories: serif and sans serif. A serif is a small line at the end of a character stroke. Consider using a serif typeface for text-intensive documents because the serifs help move the reader’s eyes across the page. Use a sans serif typeface for headings, headlines, and advertisements.
In addition to buttons in the Font group, you can apply font formatting with options at the Font dialog box.With options at this dialog box, you can change the font, font size, and font style; change the font color; choose an underlining style; and apply formatting effects.
Along with buttons in the Font group and the Font dialog box, you can apply character formatting with the keyboard shortcuts as listed in this slide.
Once you apply font formatting to text, you can copy that formatting to different locations in the document using the Format Painter as outlined in the steps on this slide.When Format Painter is active, the mouse pointer displays with a paintbrush attached. With Format Painter active, selecting text applies formatting. Click the Format Painter button once to apply formatting to one location only. Double-click the Format Painter button to apply formatting in more than one location.
Pressing F4 repeats the previous command and applies the formatting to selected text.
Paragraphs of text in a document are aligned at the left margin by default. You can change the default alignment to center, right, or justified with buttons in the Paragraph group in the Home tab.Entire paragraphs do not have to be selected to change the alignment, only a portion of each paragraph.
You can also change text alignment with these keyboard shortcuts.
Several methods are available for indenting text, including markers on the Ruler, buttons in the Home tab and the Page Layout tab, options at the Paragraph dialog box, and keyboard shortcuts.If the Ruler is not visible, click the View Ruler button located above the vertical scroll bar or click the Ruler check box in the View tab.
You can indent the first line of a paragraph or apply a right indent using markers on the Ruler as described.To precisely position a marker on the Ruler, hold down the Alt key while dragging the marker.
You can also indent text using buttons in the Paragraph group on the Home tab or the Paragraph group on the Page Layout tab.An alternative to typing the indent measurement on the Page Layout tab is to click the down-pointing arrow or up-pointing arrow at the right side of the Indent text box until the measurement displays.
You can also indent text using options at the Paragraph dialog box.An alternative to typing the indent measurement in the Paragraph dialog box is to click the down-pointing arrow or up-pointing arrow at the right side of the indent text box until the measurement displays.
Another way to indent text is to use these keyboard shortcuts.Some other useful keyboard shortcuts include Alt + Shift + D to insert the current date in a document, and Alt + Shift + T to insert the current time in a document.
In Slide Show View, click the Answer button after you believe that you know the correct answer to Question 1. The correct answer will display. Then click the Next Question button and Question 2 will appear. Continue repeating these steps for all four questions.These Checkpoints are designed to provide you with an opportunity to reflect on a few concepts at a time.
You can use several methods to change line spacing, such as using the Line and Paragraph Spacing button, theParagraph dialog box, and keyboard shortcuts.By default, line spacing is set at 1.15.
In addition to using the Line and Paragraph Spacing button, you can also change line spacing using the Paragraph dialog box. The Paragraph dialog box allows you to type measurements that are not available in the Line and Paragraph Spacing button drop-down list. If line spacing seems too spread out, make sure you typed the period in the At text box at the Paragraph dialog box.
You can also change line spacing with these keyboard shortcuts.
Control spacing above and below paragraphs with options at the Line and Paragraph Spacing button, the Before and After text boxes in the Page Layout tab, or with the Before and After options in the Paragraph dialog box.Spacing above or below paragraphs is added in points. By default, spacing after a paragraph is set at 10 points. A vertical inch contains approximately 72 points and a half inch contains approximately 36 points. For example, to add 9 points of spacing below selected paragraphs, click the Page Layout tab or display the Paragraph dialog box with the Indents and Spacing tab selected. Select the current measurement in the Aftertext box and then type 9. You can also click the up-pointing or down-pointing arrows to increase or decrease the amount of spacing before or after paragraphs.
You can also use buttons in the Paragraph group on the Page Layout tab to control spacing above and below paragraphs.Clicking once on the up arrow changes the point measurement to 6 points.
You can also use the Paragraph dialog box to change paragraph spacing.Clicking the up-pointing arrow at the right side of one of the text boxes inserts 6 points in the text box.
You can display formatting applied to specific text in a document at the Reveal Formatting task pane. The Reveal Formatting task pane displays font, paragraph, and section formatting applied to text where the insertion point is positioned or to selected text.Generally, a minus symbol precedes Font and Paragraph and a plus symbol precedes Section in the Formatting of selected text section. Click the minus symbol to hide any items below a heading and click the plus symbol to reveal items. Some items in the Reveal Formatting task pane are hyperlinks. For example, click the Font hyperlink and the Font dialog box displays. Use these hyperlinks to make changes to the document formatting. Close the Reveal Formatting task pane by clicking the Close button located in the upper right of the task pane.You can also use the Reveal Formatting task pane to compare formatting of two text selections to determine what formatting is different. To compare formatting, display the Reveal Formatting task pane and then select the first instance of formatting to be compared. Click the Compare to another selection check box to insert a check mark and then select the second instance of formatting to compare. Any differences between the two selections will display in the Formatting differences list box.
In addition to finding and replacing text, you can also find and replace formatting in a document.The expanded Find and Replace dialog box contains a variety of check boxes with options you can choose for completing a find and replace. Make sure you delete any text that displays in the Find what and Replace with text boxes.
These steps for finding and replacing formatting are continued from the previous slide.To remove the formatting options selected, click the No Formatting button that displays at the bottom of the dialog box in both the Find what and Replace with text boxes.
To draw the reader’s attention to a list of items, consider inserting a bullet before each item. If a list of items is in a sequence, consider inserting numbers before each item.Numbering before paragraphs is changed automatically when paragraphs of text are inserted and/or deleted. If you type 1., press the spacebar, type a paragraph of text, and then press the Enter key, Word indents the number approximately 0.25 inch and then hang indents the text in the paragraph approximately 0.5 inch from the left margin. Additionally, 2. is inserted 0.25 inch from the left margin at the beginning of the next paragraph. As you continue typing items, Word inserts the next number in the list. Press the Enter key twice to turn off automatic numbering or click the Numbering button in the Paragraph group. Bulleted lists with hanging indents are automatically created when you begin a paragraph with the symbol for asterisk, greater than, or minus. Type one of the symbols, press the spacebar, type text, and then press Enter. The type of bullet inserted depends on the type of character you entered. For example, if you type the asterisk symbol, Word inserts a round bullet. If you type the greater than symbol, Word inserts an arrow bullet. If you do not want automatic numbering or bulleting in a document, turn off the features at the AutoCorrect dialog box with the AutoFormat As You Type tab selected. To display this dialog box, click the File tab and then click the Options button located below the Help tab. At the Word Options dialog box, click the Proofing option and then click the AutoCorrect Options button. At the AutoCorrect dialog box, clickthe AutoFormat As You Type tab. Click the Automatic numbered lists check box and/or Automatic bulleted lists check box to remove the check mark.
You can customize bullets using options at the Symbol dialog box.Clicking the Bullets button inserts a round bullet before each paragraph. Other bullet options are available.
Create multiple-level bulleted or numbered paragraphs with options from the Multilevel List button in the Paragraph group.
You can insert special symbols with options at the Symbol dialog box. You can change the font and display different symbols at the Symbol dialog box with the Symbols tab selected.When you click the Symbol button in the Symbols group, a drop-down palette displays with symbol choices. The palette displays the most recently used symbols. If the palette contains the desired symbol, click the symbol and Word inserts it in the document. Another method for inserting symbols in a document is to use a keyboard shortcut. Click a symbol at the Symbol dialog box, and the keyboard shortcut displays toward the bottom of the dialog box.
Click the Special Characters tab at the dialog box, and a list displays containing special characters and the keyboard shortcuts to insert the characters.
Word offers a variety of default settings including left tabs set every 0.5 inch. The default tabs display as tiny vertical lines along the bottom of the Ruler.If the Ruler is not visible, click the View tab and then click the Ruler check box in the Show group. With a left tab, text aligns at the left edge of the tab. The other types of tabs that can be set on the Ruler are center, right, decimal, and bar. Each time you click the Alignment button, a different tab or paragraph alignment symbol displays. Move a tab on the Ruler by positioning the mouse pointer on the tab symbol on the Ruler. Hold down the left mouse button, drag the symbol to the new location on the Ruler, and then release the mouse button. Delete a tab from the Ruler by positioning the arrow pointer on the tab symbol, holding down the left mouse button, dragging the symbol down into the document screen, and then releasing the mouse button. Set a decimal tab for column entries you want aligned at the decimal point. To set a decimal tab, click the Alignment button located at the left side of the Ruler until the decimal tab symbol displays and then click on the desired position on the Ruler.
Leaders are useful for material where you want to direct the reader’s eyes across the page. Tabs with leaders are set with options at the Tabs dialog box.The four types of tabs can be set with leaders. Leaders can be periods, hyphens, or underlines. You can also display the Tabs dialog box by double-clicking on any tab symbol on the Ruler. At the Tabs dialog box, you can clear an individual tab or all tabs. To clear an individual tab, specify the tab position and then click the Clear button. To clear all tabs, click the Clear All button.
Add a border around text with the Border button in the Paragraph group in the Home tab.Another way to add a border around text is with options in the Borders and Shading dialog box.
You can also use the Borders and Shading dialog box to add a border around text. At the Borders and Shading dialog box with the Borders tab selected, you can specify the border type, style, color, and width.Word includes a horizontal line feature that inserts a graphic horizontal line in a document. To display the Horizontal Line dialog box, display the Borders and Shading dialog box with any tab selected and then click the Horizontal Line button located toward the bottom of the dialog box. Click the desired horizontal line in the list box and then click OK. The line is inserted in the document.
Apply shading to text in a paragraph or selected text with the Shading button in the Paragraph group in the Home tab.Another method is to apply shading to text in a paragraph or selected text with options in the Borders and Shading dialog box.
You can also use options in the Borders and Shading dialog box to apply shading to text in a paragraph or selected text.Click the Shading tab and the dialog box contains options for choosing a fill color and pattern style.
You can use options in the Borders and Shading dialog box at the Page Border tab to apply a page border to add visual appeal to your document.You can also display the Borders and Shading dialog box with the Page Border tab selected by clicking the Page Layout tab and then clicking the Page Borders button in the Page Background group. By default, a page border displays and prints 24 points from the top, left, right, and bottom edges of the page. Some printers, particularly inkjet printers, have a nonprinting area around the outside edges of the page that can interfere with the printing of a border. Before printing a document with a page border, click the File tab and then click the Print tab. Look at the preview of the page at the right side of the Print tab Backstage view and determine whether or not the entire border is visible. If a portion of the border is not visible in the preview page (generally the bottom and right sides of the page), consider changing measurements at the Border and Shading Options dialog box. Display this dialog box by clicking the Border button arrow and then clicking Borders and Shading. At the Borders and Shading dialog box, click the Page Border tab and then click the Options button that displays in the lower right of the dialog box. If you insert a page border and then display the document in the Print tab Backstage view, and notice that not all of the bottom and right borders will print, increase the measurement in the Right measurement box and the Bottom measurement box at the Border and Shading Options dialog box. The Measure from option box at the Border and Shading Options dialog box has the default setting of Edge of page. You can change this option to Text, which changes the top and bottom measurements to 1 point and the left and right measurements to 4 points and moves the page border into the page. Use the measurement boxes to specify the distance you want the page border displayed and printed from the text in the document.
A style is a set of formatting instructions you can apply to text. Word provides a number of predesigned styles and groups that apply similar formatting into sets called Quick Styles sets. Refer to these steps to apply a Quick Style.The Heading 1 style in the default Quick Styles set changes the font, font size, and font color and adds 24 points of spacing above. The heading style also removes any previous formatting.
Another way to change the Quick Styles set is by using the Change Styles button.Applying the Clean Quick Styles set changes the formatting of the title, headings, and text in the document.
You can also change the font colors, font, and paragraph spacing for the Quick Styles set by clicking the Change Styles button in the Styles group. The Change Styles button Paragraph Spacing side menu contains predesigned styles that will change the paragraph spacing and line spacing to text in a document. Hover the mouse over a style in the side menu and a ScreenTip displays describing what formatting is applied by the style.The Styles window provides additional styles you can apply to text in a document. Display this window by clicking the Styles group dialog box launcher. The styles in the currently selected Quick Styles set display in the window followed by a paragraph symbol, indicating that the style applies paragraph formatting, or a character symbol, indicating that the style applies character formatting. If both characters display to the right of a style, the style applies both paragraph and character formatting. In addition to displaying styles that apply formatting, the Styles window also includes a Clear All style that clears all formatting from selected text.
This slide outlines a few of the default formats and describes how you can modify the default formatting.If you create a document with the default formatting, you may need to use the New Line command, Shift + Enter, to keep lines of text within the same paragraph. This creates less space between one line and the next. If you turn on the display of nonprinting characters by clicking the Show/Hide button in the Paragraph group in the Home tab, a line that ends with Shift + Enter displays as a curved arrow pointing left. This symbol can help you identify whether or not a line begins a new paragraph.