Maksim Aleksandrov is a Russian civil engineer born in 1989. He received his degree in Civil Engineering from Murmansk State Technical University in 2011. Since 2013, he has worked as a structure engineer for Reinertsen NWR, a Norwegian engineering company, where he has led 3D modeling and design projects for oil and gas infrastructure. Prior to that, he held engineering roles in Russia focusing on construction project management, design, and field work.
2012 02-08 autodesk infrastructure event in stockholm-multiconsult projectsÅge Langedrag
Use of Autodesk Infrastructure Modeler in early phase design of a large rail project in Norway. Use of Civil 3D, Revit and 3ds Max for design, coordination and visualization of road and rail projects in Norway
working skills :
o Preparation of a 3D PDMS model for all plant areas within the contract Scope,
o The 3D model is showing the plant and the integration into the existing. The
Model includes:
i. Plant co-ordinates and elevations
ii. All equipment items acc. to equipment list.
iii. Clearances for disassembly, maintenance and operation.
iv. Clearances for pipe- and cable runs.
v. Requirements for steel structure (buildings & pipe racks).
vi. Pipe routing for major process piping (main process route).
vii. Equipment Arrangement according the layout standard & safety gaps
viii. The required steel structure Develop and issue isometric drawings including pipe
Supports for construction using 3D Model.
o Preparing complete design of piping general arrangement layouts and key plans using P&ID's and vendor data.
o Design Review for lines, equipment and structure in Navisworks, & PDMS Reviews for completeness (routing feasibility and requirements of process and accessibility).
o Prepare piping Daily & weekly reports.
o Attend hazed kick of meeting
o Follow up tenders
o Attend engineering weekly meetings to review progress & schedule
o Field Technical support.
o Site verification on isometric Drawing & layouts for new lines/tie in's.
o Developing AS BUILT Drawing.
o Testing procedures as applicable to Fabricated Equipment & Piping with knowledge of Isometric drawings and P& ID's
o Prepare transmittal report
And now i am working a piping design engineer at UNEPP
You can find my resume attached below as i will gladly provide any further information may be required
thank you
Best Regards
Mohamed osama
2012 02-08 autodesk infrastructure event in stockholm-multiconsult projectsÅge Langedrag
Use of Autodesk Infrastructure Modeler in early phase design of a large rail project in Norway. Use of Civil 3D, Revit and 3ds Max for design, coordination and visualization of road and rail projects in Norway
working skills :
o Preparation of a 3D PDMS model for all plant areas within the contract Scope,
o The 3D model is showing the plant and the integration into the existing. The
Model includes:
i. Plant co-ordinates and elevations
ii. All equipment items acc. to equipment list.
iii. Clearances for disassembly, maintenance and operation.
iv. Clearances for pipe- and cable runs.
v. Requirements for steel structure (buildings & pipe racks).
vi. Pipe routing for major process piping (main process route).
vii. Equipment Arrangement according the layout standard & safety gaps
viii. The required steel structure Develop and issue isometric drawings including pipe
Supports for construction using 3D Model.
o Preparing complete design of piping general arrangement layouts and key plans using P&ID's and vendor data.
o Design Review for lines, equipment and structure in Navisworks, & PDMS Reviews for completeness (routing feasibility and requirements of process and accessibility).
o Prepare piping Daily & weekly reports.
o Attend hazed kick of meeting
o Follow up tenders
o Attend engineering weekly meetings to review progress & schedule
o Field Technical support.
o Site verification on isometric Drawing & layouts for new lines/tie in's.
o Developing AS BUILT Drawing.
o Testing procedures as applicable to Fabricated Equipment & Piping with knowledge of Isometric drawings and P& ID's
o Prepare transmittal report
And now i am working a piping design engineer at UNEPP
You can find my resume attached below as i will gladly provide any further information may be required
thank you
Best Regards
Mohamed osama
Welcome to Catch 22. We're a recruitment business that can handle ALL your staffing requirements, large or small. Whether you are looking to find the right person or the right job, temp, permanent or contract, Catch 22 has all the experience and expertise you need. It's a service you can trust!
Neil Hudgell Solicitors Trust - Investing in Local Life. The presentation from the official 2nd year anniversaty event. http://www.neil-hudgell.co.uk/about-us/the-neil-hudgell-solicitors-trust
MAKALAH MEMBINA MORAL DAN AKHLAK DALAM PENDIDIKANLta Buahati
MAKALAH
MEMBINA MORAL DAN AKHLAK DALAM PENDIDIKAN
Makalah ini disusun untuk memenuhi tugas pada Mata Kuliah
Etika Profesionaliosme dan Pendidikan
Dosen : DR Syamsudin
Disusun oleh
Hasanuddin
Program Pasca Sarjana
STIMA IMMI – Kampus Buahati
Tinker Tailor Soldier Spy: Twists & Turns of Working in Global Design TeamsItamar Medeiros
If you find yourself spending a lot of time in conference calls, or that some of stakeholders you have to work with are not even in the same timezone as you, then you’re probably working in a Global team. With all the excitement that comes with working with people from different parts of the world also comes the challenges of helping the team to the deliver the best User Experience product you can. In this talk we will explore the dynamics of distributed design teams, we will better define some of the problems these teams face, and discuss some strategies to cope with these challenges.
In excess of 20 years of multi disciplinary experience in architecture and construction on a variety of high quality construction projects in the public, commercial, retail and residential sectors, including the last 5 years overseas in Construction Delivery and Project/Delivery Management assignments in 3 different continents. He has an in-depth knowledge of construction processes and packages and use these practical and theoretical skills to achieve successful outcomes by driving each phase of the construction process from start to finish.
1. CURRICULUM VITAE
MAKSIMETC ALEKSANDR
BORN: 9th
of May 1989
NATIONALITY: Russian Federation
LANGUAGES: Russian, English, Norwegian(basic level)
PHONE: +7 921 176 83 48
E-MAIL & SKYPE: eagleoneca@gmail.com
a_maxi@bk.ru
EDUCATION:
• 1995 – 2006 secondary school ( school №57) graduated with a silver medal (with
distinction).
• 2006 – 2011 Murmansk State Technical university - Civil engineering (civil and
industrial buildings) (Technical degree in Civil Engineering)
WORK EXPERIENCE:
June 2013 – present Reinertsen NWR (Russian branch office of
Reinertsen AS, Norway)
Position: Structure engineer
Projects and responsibilities:
- Module hall Phase 2 – project of construction of the new building on the
fabrication site
Spreader beam
3Dmodeling, drawings production in TEKLA program
Client: Reinertsen AS
- Oseberg Delta2
Transport frame
3D modeling, drawings production in TEKLA program.
Drawings check. Load out organization work at site. MC work.
Client: Statoil AS
2. - HVAC Del-F Eksterne kjøleenheter ktr-rom LER (Heilmdal platform, Statoil)
LIR Base
3D modeling, drawings production in TEKLA program
Prefabrication package creating
Client: Statoil AS
- Yamal LNG piperack feed
3D modeling, drawings production in TEKLA program
Responsibility of designing (details and conections) large piperack for YAMAL LNG
project.
Client: Yamal LNG
- DOTS (Heidrun platform, Statoil)
Antenna landing plate
3D modeling, drawings production in TEKLA program
Client: Statoil AS
- Produced Water Treatment (EPCI, Heimdal platform, Statoil)
MONORAIL 2-WB-0485 FOR CENTRIFUGES
ACCESS PLATFORM FOR FW VALVE
3D modeling, drawings production in TEKLA program of monorail for centrifuges and
access platform for valve operating. Positioning and complex geometry of monorail
was developed according laserscan model justified location in a heavily loaded zone
with a lot of piping and electricity equipment.
Client: Statoil AS
- HEIMDAL remodeling
3D remodeling in TEKLA and PDMS according to laserscan model and drawings from
suppliers. Drawing chekings, referencing to AS-Build documentation/
4D visualization of creating works in Naviswork Simulate
Client: Reinertsen AS
- Helideck construction GSP Saturn, offshore platform
3D modeling in TEKLA and PDMS FEED documentation.
Designing of helideck support frame/escape routes for installation aluminium
helideck on jack-up rig was damaged during a violent storm.
Client: Grup Servicii Petroliere
3. April 2013 – June 2013 OJSC “RosSpetsMontage”, (Murmansk)
Position Field –engineer,
Project:
- Construction of the building-shelter DSU (Dry Storage Unit for radioactive
waste) in Andreev bay (Murmansk Region)
Responsibilities:
• Designed and prepared engineering designs, plans, drawings, specifications, and cost
estimates.
• Coordination of technical design documentation
• Researched project design requirements.
• Prepared preliminary design studies.
• Performed complex calculations and prepared estimates of time and material costs.
• Coordinated design proposals with utility companies and other agencies.
• Assist in surveying work needed for design and construction of public works projects.
• Performed field checks of project sites or survey areas to verify survey results or
features.
• Prepared engineering studies and reports.
• Researched publications and industry information sources.
February 2013- Marth 2013 Freelance
Position 3D modeling
Responsibilities:
• 3D modeling of small projects in RhinoCeros (parametric modeling via Grasshopper
plugin)
August 2012- January 2013 StroyStandart LLC (Murmansk)
Position Field –engineer
Responsibilities:
• Commissioning work from both in house personnel and external contractors.
• Participating in project engineering reviews, studies and site investigations.
• Having contractual and commercial input to the civil engineer aspects of projects.
• Ensuring that all design work that is produced on a project is of a sufficient quality to
avoid any errors or rework.
• Working closely with all levels of management, engineers and field operations staff.
• Setting up project procedures and relevant quality forms.
• Preparing progress reports.
4. Summer practice:
2008-2011 – “StroyStandart” LLC (Murmansk, Russia)
Position Junior civil–engineer
KEY QUALIFICATIONS:
• TEKLA (designing and drawings)
• PDMS (design and drawings)
• Autodesk Inventor Pro
• RhinoCeros, Grasshopper
• AutoCAD
• Navisworks (3D and 4D visualization)
• Experience with application SCAD Office System (Stress analysing systems)
• STAAD
• MS-Office
• MIPS (ERP-systems)
PERSONAL ATTRIBUTES
• Good communication skills when dealing with clients, developers, consultants,
elected representatives and the public.
• Highly developed numeracy and computer literacy skills.
• Self motivator and the ability to motivate others.
• Keeping up to date with industry best practice.
• Able to work on your own initiative as well as being a team player.
• Problem solving.
• Decision making.
• Critical thinking.
• Job task planning and organizing.
• Significant use of memory.
• Finding information.
• Continuous learning.