1. 6
Q: What are the things needed to be done before construction?
A: First, get the design apporve by the client to ensure they know what are we
doing then we proceed with the stage which is get approval from the development
authorities. It can be from local authorities, for here Kuala Lumpur is under DBKL or
it can be Bomba which is fire authority.
Q: What are the things needed to be done during construction?
A: I would say the main important consultant will be architects, C&S, M&E. and
of course QS. QS monitor the cost and ensure the budget is monitored througout
the construction period. Then, Architect we called it as SO ( supervising officer).
QS will advice us should there any additional cost and etc so architect have to
monitor it from the QS’s advices.
Q: What are the things needed to be done after completion?
A: There is some complains because the buidling is buildt by human so there
will be some mistakes. Therefore this is the thing that architect have to monitor, to
ensure that all these defects are being rectified by the contrator
Special thanks to : A&A
ARCHITECTURE SDN BHD
Edited by: Mok Po Yi 0318207
We learned much and gain more specific
knowledge from experienced architect yet we know
more about architect this area.
Taylor’s
University