Madan Banotra has over 27 years of experience in project execution and management related to building management systems, fire alarms, and process control instrumentation. He has extensive experience working with DCS, PLC, and SCADA systems on oil, gas, and power projects in multiple countries. Currently, he works as a DCS and PLC engineer on a large FLNG project in Australia, where he is responsible for pre-commissioning and commissioning of the control systems.
DAMMAM SECOND INDUSTRIAL CITY - IPS REHABILITATION WORKSIslam Nassef
Design capacities of the lift station
approximately 1670 m3/h. The
GWC’s initial goal for this project
is to develop a prioritized list of
repair/refurbishment projects based upon a comprehensive condition assessment and criticality analysis of IPS lift station planned to remain in operation.
Pre Commissioning Testing Training and Maintenance of Instrumentation Analyzer, Metering Skid, Crude Oil Samplers, Corrosion, CP Radio Monitoring system, Laser HF and H2S Hydrogen, Oxygen Emerson oxymitter, Emerson Bentely Navada Vibration Analyzers, Thermography, Gas cement Petroleum Analyzers, Gas Chromatograph in Refinery Oil Gas Plants Petrochemical Aramco Sabic.
Extensive coordination between client and supplier in make sure all resolution successfully covered to achieve end client satisfaction.
DAMMAM SECOND INDUSTRIAL CITY - IPS REHABILITATION WORKSIslam Nassef
Design capacities of the lift station
approximately 1670 m3/h. The
GWC’s initial goal for this project
is to develop a prioritized list of
repair/refurbishment projects based upon a comprehensive condition assessment and criticality analysis of IPS lift station planned to remain in operation.
Pre Commissioning Testing Training and Maintenance of Instrumentation Analyzer, Metering Skid, Crude Oil Samplers, Corrosion, CP Radio Monitoring system, Laser HF and H2S Hydrogen, Oxygen Emerson oxymitter, Emerson Bentely Navada Vibration Analyzers, Thermography, Gas cement Petroleum Analyzers, Gas Chromatograph in Refinery Oil Gas Plants Petrochemical Aramco Sabic.
Extensive coordination between client and supplier in make sure all resolution successfully covered to achieve end client satisfaction.
Pathways to Happiness are policy suggestions for communities using the Happiness Index and scoring low in an area. Each one suggests policies and programs for when a community scores low in one area.
Webinar SELL&SIGN du 15/11/2016 "La signature digitale au service de l'archit...Alex Mermod
Avec le Témoignage client de François Gautier, Architecte.
Les architectes ont souvent besoin de faire signer des contrats à distance notamment à leurs partenaires du BTP. Ces démarches peuvent prendre beaucoup de temps et coûter cher au cabinet.
SELL&SIGN, vous présente le cas d’un client qui s’est équipé de la signature électronique pour faire signer tous ses contrats à distance et en seulement quelques secondes comme ses marchés et situations de travaux, devis, PV de chantiers…
Au travers de cette web conférence, découvrez pourquoi ce client a choisi SELL&SIGN et comment il est arrivé à optimiser la signature de ses contrats à distance grâce à cette application.
Category 6 Patch Cord Performance
Sterling Vaden, VP of Research & Engineering, Optical Cable Corporation
OCC 100% performance tests all Cat6 and Cat6A patch cords using our own industry standard patch cord test adapters and our own industry standard test fixtures - because OCC (SMP) was involved in the creation of the standards and the test adaptors used.
I possess over 24 years of rich experience in Project Management, Detail Engineering, Planning, Construction, Pre-commissioning, Commissioning, Operations and Maintenance of HVAC System, Oil & Gas /Power Plant / Refinery / Gas Power Plant / GIS / Transmission and Distribution Line from 11 KV to 400 KV /Process Plants, Upgrading of Electrical HV/MV/LV & HVAC Systems. I have successfully completed B.Tech. (Electrical Engineering) and Diploma in Electrical & Instrumentation Engineering.
1. MADAN BANOTRA D-4/83,Sector-15,Rohini,Delhi-89
banotra@rediffmail.com Mobile: +77784872179
mbanotra@gmail.com Home : +91 9811809827
PROFILE:
27 years Project Execution experience in Building Management System, having Fire alarm and fire control system.
Oil ,Gas and Power Industry including the Export Pipeline / Onshore Oil field development /Main Oil Transfer
Station & Pump House/ Gas Treatment Plant and Aromatic Refinery Project, with various multinational companies
and well reputed client in Kuwait, Bahrain, UAE, Qatar, Kazakhstan and India, with hand on experience on
Honeywell Experian, Yokogawa’s CS3000 DCS and Allen-Bradley & Siemens PLC systems and Serial Link
Communication with DCS and sub systems. Also Gas Turbines Speed Controls, Anti- Surge Control and Vibration
Monitoring Systems, am acquainted with, On Line Gas Chromatographers, humidity, moisture, Oxygen,
conductivity, pH analyzers, Fire & Gas Detection Systems (UV/IR Flame Detectors, Acoustic Gas Leak Detector,
I/R Hydrocarbon Gas Detector & Zewellger make H2S Gas Detectors) and very versant with drawings as
applicable for Plant ESD & P&ID. Able to manage and coordinate all construction activities and ensure that all
project deliverables are achieved with regards to safety, Quality, Planning and Cost control.
PROFESSIONAL CAREER HISTORY
Since Sep. 2014 to Till date
Position: - DCS & PLC Engineer
Company:- Technip France
Client:- PRELUDE FLNG SHELL
Scope: Responsible for Pre commissioning and commissioning of latest control system for world largest FLNG
control systems, having Emerson Control system. Performing Site Acceptance Test, verification of serial links with
subsystems Fire and Gas function test, punch closer, including responsibility of Permit and Isolation Authority for
PTW system.
Since June. 2011 to Aug.2014
Position: - Deputy Manager – E&I
Company: - Kaz-Stroy Services- Kazakhstan
Client: Sinopec Engineering China.
Project Value: USD 368 MlN.
Scope: Responsible for Construction, Pre-commissioning and Commissioning of DCS and ESD System for
process control of CGTP, SRU and LPG plant at Alibekmola in Kazakhstan. Activities involve are to monitor the
day to day progress of subcontractors, scheduling activities to achieve the completion of construction targets
provided by management. Make procurement for balance of material and follows up with the vendors for schedule
completion of project. Preparation of Daily and weekly report to management. Checking the act of acceptance for
installation work. Achieve this target in extreme weather condition at Alibekmola site in -25 to -35 Deg C.
2. December 2009 to June 2010
Position: Instrument Commissioning Supervisor
Company: TECHNIP France OAG1 PROJECT,
Clint: ADGAS. DAS ISLAND Abu Dhabi UAE.
Project Value: USD 250 MLN.
Supervision of Pre commissioning and commissioning works of Fire and Gas System, Flammable Gas Detectors,
Toxic Gas Detectors, MCP, Leak Detectors, Building Fire Alarm System, VESDA System. Followed by Function
Tests, punch list clearing and system handing over to the client. DCS/F&G/SIS Systems, marshaling and PDB
cabinets
July 2008 to Nov. 2009
Position :- Instrument Supervisor Commissioning
Company: - TECHNIP France,
Client : - Qchem – Ras Laffan Olefin Project.
Project value : USD 950 MLn.
Site Acceptance and Commissioning of DCS/F&G/SIS Systems, marshaling and PDB cabinets,
UCPSC packages cabinets. Then following the MODBUS and Foundation field bus serial link communication with
DCS and sub systems. FOUNDATION FIELDBUS
Devices down loading by Field mate and troubleshooting activities of loops.
Commissioning of Rosemount’s Master Tank gauging system, MECCI and FLOBOSS
(Rosemount) metering system (Emerson).
June2006 to July 2008
Position: - Instrument Supervisor
Company: - SAJ GAS.
Client: - Dana Gas, Sharjah (UAE).
Project Value: USD 200 MLN.
Responsible for plant commissioning activities having Natural Gas Sweetening Plant which contains SRU, Sulfur
Postulation Unit and Utilities as Nitrogen Plant, Steam Boiler, Fire and Gas Detection system, De-ionize water unit
and Gas Turbine etc. Leading the team of technicians to carry out the task for commission the plant with in the
schedule time, then maintenance activities of running plant.
Dec2005 to June 2006
Position: - Manager C&I
Consultant Company: - Dimension Consultant & Engineering (P) Ltd. New Delhi
Looked after companies various ongoing projects for Captive Power Plant in North
India. Carried out detail engineering of instrumentation, checking vendor’s documents. Performing FAT and SAT
for instrumentation of project. Preparing instrument and cable schedule, also time to time site visits to update
instrument related quarries with client.
Feb.2003 to Sep.2005
Position: Instrument Supervisor.
Company: - Kuwait National Petroleum Company, Mina Al Ahmadi Refinery [KUWAIT]
Worked at KNPC Mina Al Ahmadi Refineries Gas Plant. Equipped with state of art modern instrumentation.
Involved in day to day preventive maintenance, break down maintenance and plan S/d systems, of DCS, PLC,
various Control and measuring Instruments, PAGA, Fire and Gas system.
December 1994 to Feb.2003
3. Position: - Sr. Instrument Engineer.
Company: - M/s Telecon Systems, New Delhi.
Responsible to supervise the company’s various projects Sr. Instrument Engineer, and participate in techno
commercial Instrumentation Bids. Supervise the company work of loop checking, pre-commissioning &
commissioning of Gas Processing Plant for Oil India Ltd, Jaisalmer, PTA Plant and associate auxiliaries unit at
SVC Superchem Ltd. Mathura. Sulfur Recovery Unit I.O.C.L. Mathura. 250 mw Thermal Power Plant at Neyveli
[T.N] and Tarapur Nuclear Power Plant unit 3 & 4. [Mah.] also Shutdown maintenance of Nuclear Reactor Process
Control Instrumentation at Narora Atomic Power Station.
August 1991 to August 1994
Position: - Instrument Supervisor
Company: - Bahrain National Gas Co. Bahrain
Actively involved in pre-commissioning, commissioning and maintenance of Gas Plant along with their Satellite
Gas Compressor Station, along with Nevo-Pignon (G.E.) & Ruston Gas Turbines, On Line Analyzers, Gas
Chromatographers, Flame & Gas Detection Systems, Moisture Analyzers and Micro Processor based electronic
& pneumatic process control instruments.
From 1990 to 1991
Position: - Sr. Instrument Technician
Company: - Ranutrol Instrument Ltd. New Delhi.
[Subsidiary of Honeywell USA]
Representing the company in servicing, commissioning and repairing of Process Control Instruments of Yamatake
Honeywell / Honeywell supplied by company in all over India. Attend the service complaints of company
equipment’s, rectify the breakdown problem and trained the operators on various company supplied equipment’s.
From : 1984 to 1989
Position: - Instrument Technician
Company: - Kuwait Oil Company- Kuwait.
Worked with K.O.C. & K.N.P.C. through following International-contracting companies e.g.
Technocrat International Ltd. (UK)
Epic Instrument Inc. (Texas, USA)
Wood Group Engg. Ltd. (Scotland)
Personal Responsibilities involved in maintenance, servicing, commissioning and loop checking for electronic &
pneumatic instruments related to Gas based Power Plant, Gas Dehydration Unit, Crude Desalination Units and
Rotary Gas Compressor at Crude and Gas Gathering and Booster Stations.
Other MAJORE SUCCESSFULLY EXECUTED PROJECTS:-
Sulfur Handling Plant Revamping of Control System
Gas Processing Unit Oil India Ltd. Jaisalmer [Rajasthan]
Satellite Gas Compressor & Dehydration Station and Gas Plant Bahrain National Gas Company Reboiler
and Hot Oil Furnaces and Auxiliary Units at Mina Abdullah Refinery Kuwait.
6MW Dual Fuel Captive Power Plant Malwa Industries Ludhiana Punjab.
Oil & Gas Gathering Station
Kuwait Oil Company Kuwait.
Sulfur Recovery Unit I.O.C.L. Mathura Refinery [UP]
Safety Training
• Emerson level 3 training
• Offshore PTW Certification by ADGAS Das Island UAE.
• Primary First Aid. Sajgas Plant Sharjah UAE.
• Speedtronics Mark-IV Speed Control Systems
4. • Plant Fire & Safety System Bahrain National Gas Co.
• H2S and BA system Rasgas- Qatar.
COMPUTER
• Microsoft Office, Net Surfing, Windows, Lotus, Takeover XP.
PERSONAL DETAILS
Father’s Name : Late Sh. Som Nath Banotra
Date of Birth : 2nd
March 1959
Nationality : Indian
Permanent Address : D-4/83, Sector-15, ROHINI
Delhi-110089- INDIA
Passport details : P7176457 Valid till 21-11-2026.
Marital status : Married
Qualification : Higher Secondary with science from CBSE Delhi in 1978.
Tech. Qualification : Diploma in Instrumentation in from Delhi 1978-81
Driving License : Car Korean and Indian.
I truly certified that the above mentioned educational and experience details are true and correct to the best of
my knowledge and ability. :
(Madan Banotra)