This Presentation gives information about machine embroidery tips for beginners. Also some information about embroidery digitizing have been given. For more information about embroidery digitizing refer this post : http://www.hometalk.com/8732515/seven-insane-but-true-things-about-embroidery-digitizing

1. Machine Embroidery Tips For
Beginners
By – Jeff Hernandez

2. Introduction
• Machine embroidery is a process where sewing
machine or embroidery machines are used to create
patterns on clothes.
• People nowadays are very fond of embroidery
designs.
• Some of the useful machine embroidery tips for
beginners have been listed in slides below.

3. Needle for Fabric
• The machine used for
embroidery goes so fast
that many times, needle
breaks.
• So, one needs to check the
stabilizer for fabric and the
needle used for the fabric.

4. Test Embroidery Pattern
• Use a scrap fabric to test
the embroidery pattern.
• You can find a perfect
match of stabilizer, needle,
tension and fabric.

5. Write the exact combo
• Once you find perfect
combo of fabric, stabilizer,
needle and tension, make a
note of it.
• If you have to embroider
that fabric again, you can
save the time and efforts
required for testing.

6. Buy Embroidery Bobbin Thread
• Embroidery machines use
certain type of threads just
for bobbin.
• Purchase these threads and
wind several bobbins for
later use.
• It will prevent needle from
breaking.

7. Learn Machine Embroidery
• Machine Embroidery is not
a load machine-push
button process.
• Invest your time in
learning Embroidery first.
• Don’t be angry if it is not
perfect for the first time.

8. Turn off your machine if it makes
sound
• If the machine sounds like
a hammer, turn it off.
• If such thing happen, you
have wrong stabilizer or
loaded something
incorrectly.

9. Purchase Machine Embroidery
Essentials
• Purchase a book to learn
more about machine
embroidery. The book
named, Machine
Embroidery Essentials by
Jeanine Twigg is a great
source for learners.
• This book gives a start on
some of the common
combos.

10. Stock Up On Stabilizer
• You can patch a sticky
stabilizer by cutting out a
piece bigger than your hole
& placing the patch on top.
• Once your sticky stabilizer
is pulled tight, throw it &
hoop a new piece.

11. Conclusion
• This Presentation is created to help beginners know
a few points about machine embroidery.
• Nowadays Embroidery Digitizing is very popular. It
gives a good look to your embroidery.
• Machine Embroidery is being widely used and
therefore, has increased the usage of Embroidery
Digitizing as well.

12. Thank You
• Thank You for investing your time to go through
this presentation.
• I hope this might fulfill the purpose it has been
created for and enlighten the minds of many more
embroidery enthusiasts who wish to try their hand
at machine embroidery.

13. Related Links
• https://blog.fabric.com/2012/07/machine_e
mbroidery_tips.html
• http://www.hometalk.com/8732515/seven-
insane-but-true-things-about-embroidery-
digitizing