Gi-Fi or Gigabit Wireless is the world’s first transceiver integrated on a single chip that operates at 60GHz on the CMOS process. It will allow wireless transfer of audio and video data up to 5 gigabits per second, ten times the current maximum wireless transfer rate,at one-tenth of the cost,usually within a range of 10 meters.It utilizes a 5mm square chip and a 1mm wide antenna burning less than 2 watts of power to transmit data wirelessly over short distances, much like Bluetooth.
15 minutes intro to the Sigfox service, before a Bosch presentation of their Sigfox usecases & implementation
Presentation made during Bosch Connected Experience (March 2017, Berlin)
Antenna design for sigfox ready devices recommendation guideSigfox
In this document, several aspects of antenna design and integration are developed. The document focuses on SIGFOX IOT application and small form factor devices.
The importance of implementing a high-performance antenna in a device is demonstrated by analyzing the SIGFOX radio link budget.
Theories are then developed to explain why antennas can be extremely sensitive to their environment and may therefore have varying performance (e.g. when held compared to standing alone). Using the same arguments, it is shown that the same antenna can have different behavior when implemented in two distinct device architectures. This leads to an initial finding that for each device development, a specific antenna design, or at least antenna tuning, must be carried out.
Then, the most important physical parameters that impact antenna characteristics and behavior are presented. Several typical antenna topologies, miniaturization techniques, and manufacturing techniques applicable to SIGFOX IOT applications and small form factor devices are listed.
Advice regarding off-the-shelf antennas is given to explain why antenna performance depicted in datasheets may differ from “real-life implementation” performance.
A selection tool will help the reader to select the best antenna topology for the device, based on several parameters such as expected performance, integration or miniaturization level, and design complexity.
To close the document, a simple method that roughly estimates devices radiated performance is given. This method does not involve very expensive equipment, such as anechoic chambers, and is relatively easy to set up.
Gi-Fi or Gigabit Wireless is the world’s first transceiver integrated on a single chip that operates at 60GHz on the CMOS process. It will allow wireless transfer of audio and video data up to 5 gigabits per second, ten times the current maximum wireless transfer rate,at one-tenth of the cost,usually within a range of 10 meters.It utilizes a 5mm square chip and a 1mm wide antenna burning less than 2 watts of power to transmit data wirelessly over short distances, much like Bluetooth.
15 minutes intro to the Sigfox service, before a Bosch presentation of their Sigfox usecases & implementation
Presentation made during Bosch Connected Experience (March 2017, Berlin)
Antenna design for sigfox ready devices recommendation guideSigfox
In this document, several aspects of antenna design and integration are developed. The document focuses on SIGFOX IOT application and small form factor devices.
The importance of implementing a high-performance antenna in a device is demonstrated by analyzing the SIGFOX radio link budget.
Theories are then developed to explain why antennas can be extremely sensitive to their environment and may therefore have varying performance (e.g. when held compared to standing alone). Using the same arguments, it is shown that the same antenna can have different behavior when implemented in two distinct device architectures. This leads to an initial finding that for each device development, a specific antenna design, or at least antenna tuning, must be carried out.
Then, the most important physical parameters that impact antenna characteristics and behavior are presented. Several typical antenna topologies, miniaturization techniques, and manufacturing techniques applicable to SIGFOX IOT applications and small form factor devices are listed.
Advice regarding off-the-shelf antennas is given to explain why antenna performance depicted in datasheets may differ from “real-life implementation” performance.
A selection tool will help the reader to select the best antenna topology for the device, based on several parameters such as expected performance, integration or miniaturization level, and design complexity.
To close the document, a simple method that roughly estimates devices radiated performance is given. This method does not involve very expensive equipment, such as anechoic chambers, and is relatively easy to set up.
This presentation takes a look at the technology roadmap for 5G NR millimeter wave (mmWave). Including features such as integrated access and backhaul (IAB), enhancements in beam management, mobility, coverage, and more. For more information, please visit www.qualcomm.com/mmwave
5G will transform the IoT, expanding the reach of 5G and mobile technologies beyond smartphones. This presentation talks about how 5G is opening doors to new use cases, what is in the 5G evolution that will address the expanding IoT needs, and what Qualcomm is doing to deliver end-to-end technologies and solutions.
Full overview of the Sigfox Service
Some details are proper to the Sigfox Radio Configuration 2 (USA - Mexico - Brazil) : Frequency & spetcrum occupation
IoT Communication Protocols, Socket Programming with Python, MQTT & HTTPAnshu Pandey
Notes on IoT COmmunication protocols like Wifi, Bluetooth, Sigfox, XBee, LoraWAN. A complete description and python code for socket programming, TCP client, and Server, UDP Client, and Server. HTTP v/s MQTT. MQTT Python programming for raspberry pi
Digital Nasional Berhad (DNB) has been established to accelerate the availability and adoption of 5G to support the transformation of Malaysia. The rollout of the 5G network has kicked off with the provision of 5G coverage in the Malaysian capital. This 5G network, will empower Malaysians to embrace the new digital economy.
Source: https://www.digital-nasional.com.my/white-papers
What Makes 5G Network Different - Digital Nasional BerhadDigitalNational
5G network is here and set to change our world for the better. It is true that 5G represents the fifth generation of mobile networks, but it is so much more than just another ‘G’. Read more
Presentation from the webinar on the Invitation to tender: EGNOS service for payment and liability-critical road applications. More information about the tender: https://www.gsa.europa.eu/newsroom/news/invitation-tender-egnos-service-payment-and-liability-critical-road-applications
On 9 October 2019, a webinar on the Fundamental Elements Call “Enhanced GNSS Receiver/User Terminal” was held to provide applicants with additional details on the proposal preparation.
This Smart Region ambition of the regional council is declined into five operational pillars driving our action in terms of digital transformation of territories and organizations.
Development and evaluation of systems built-in or to be used by trucks for secure road
transport of (dangerous) goods. Preventing trucks and transport of goods to be misused for other purposes such as terror attacks
WHY SOUL? AIRBORNE DISEASES! 600 Million
People with respiratory diseases and are increasing every year
200 Billion €/year
Direct and indirect costs
25% have airborne diseases
7.8 Million Children Reported respiratory allergies
TAPAS
• Developed in collaboration between SDFE, DTU Space and City of Aarhus
• An open research and development platform for precise positioning
• TAPAS takes the research out of the laboratory and offers test opportunities in a reality scenario in a densely populated urban area
ITS (Intelligent Transportation Systems): add information and communications technology to transport infrastructures and vehicles in an effort to improve their safety, reliability, efficiency and quality.
Our core solution to ERP’s woes is Next , the world’s first eDLT solution platform... an hyper-scalable, secure, and powerful solution to manage the complex ecosystems of nodes and centralized organisations, that delivers far more functionality than the most sophisticated ERP system on the planet.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...SOFTTECHHUB
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
2. In 2010 we launched Sigfox
to connect any everyday object to the internet
from anywhere in the world.
3. Using public radio spectrums
our revolutionary technology
listens and captures the tiniest of data
4.
5. Low Energy
Device in sleep mode most of the time
Small messages (up to 12 bytes)
Few messages per hour or day
Smart cooperation between network
and device
Overall TCO at lowest
Device: Enabling the simplest, lowest
cost radio chips
Network: One central network
Integration: comprehensive API and IoT
platform provider
Global & Reliable
One contract, One network
Managed Network with high Quality of
Service
Highly resistant to interference &
jamming
Simple
One central system: No pairing, no
configuration
No connection. No protocol: the
simplest and most efficient link
between objects and the Internet
8. GCT Semi:
Save battery with Sigfox,
secondary connectivity
Sigfox as a backup for cellular
Sigfox core connectivity with high QoS, to unlock massive IoT
adoption and address industrial use cases.
Complementary to BLE, Wi-Fi, GSM & beyond
Sigfox in 100% of connected devices: as a primary or as a
backup connection
Hundreds of devices in the ecosystem and growing
Live
9. Disposable envelopes
use one-single disposable device
Affordable devices
Re-invent inventory,
supply chain and logistics
Connectivity to open up new market potential targeting
even disposable objects & retrofit of existing RF devices
A technological breakthrough leading to a business game
changer
Reducing object costs to tens of cents
Retrofit existing RF
devices
2018
10. A variety of geolocation services to fit YOUR use case
Sigfox-only geolocation
Sigfox + other technology geolocation
Global & less energy
consuming.
Based on probabilistic
algorithms.
(2018)
Machine learning running for
higher precision on specific
routes and POI (such as
logistic nodes)
Combined with Wi-Fi Combined with GPS
Live
Achieve higher precision &
indoor, in dense areas
The best of WIFI and Sigfox
service continuity guaranteed
High precision outdoor, with
medium precision indoor.
The best of GPS or Sigfox
11. Enable a simple device to communicate on the Sigfox
network wherever it is…
Special world wide module (Multiple radio configuration zone)
Selected Base stations (118 Point of Interest) broadcast RC
beacon every 5 minutes
Unique hardware SKU
2018
12. • Global satellite coverage
used as an extension of
terrestrial networks
• Seamless integration
between satellite and
terrestrial networks with
same objects and messages
• Scalable constellation of
nanosatellites
• Same ISM band used to
connect objects to terrestrial
networks and satellites
Sigfox satellite constellation will complete Sigfox Operator terrestrial networks in remote areas
2018 2019 2020
ELO - POCELO
Commercial
service launch
ELO launch
13. IoT is not about the hardware.
It’s not even about the data.
It’s about the service.
14. Improving business efficiency
& transforming business processes
examples: predictive maintenance, better
asset utilization, higher productivity
Generating new opportunities
& enabling new business models
examples: HVAC-as-a-service thanks to
remote monitoring
Bringing to our customers…
We decided to launch Sigfox in 2010, to connect any object surrounding us in our daily life, to get them digitized in the cloud.
We wanted to extract data from tiny signals and push back the limits of sensitivity, by covering every square meter of the planet
This was our vision and our objective when we created Sigfox with Christophe 7 years ago
Looking at the point we have reached today, we see that we have progressed very quickly.
A lot was delivered and done. Sigfox is now a reality on all 5 continents
In 7 years: a new technology, a brand, networks, devices, API were born = > for one euro invested in Sigfox, one Euro was invested in the ecosystem