LO1 and 2 Formative Test.pptx
•Download as PPTX, PDF•
0 likes•2 views
1. Louiglen E. Pacana provides a formative test to assess understanding of computer hardware tools. 2. The test asks students to identify 15 tools based on their definitions. Tools include things like gloves for avoiding contact, nut drivers, tweezers for small parts, anti-static wrist straps, network cable testers, brushes for cleaning, and multi-meters for testing components. 3. The test directions state that the first five students to score highest will choose their partner for the next activity.
Report
Share
Report
Share
Recommended
Quiz in Tools in Computer System Servicing.pptx
Multimeter, network cable tester, zip ties, compressed air, Phillips head screwdriver, nut driver, flat head screwdriver, anti-static wrist strap, tweezers, cotton swabs, small parts tray, wire strippers. These tools are used for testing components, organizing cables, removing dust, fastening screws and nuts, retrieving small parts, cleaning components, and handling wires when servicing computer systems.
Grade8_Q1-4_W1_HandTools.pdf
This document provides information about a module on using and maintaining hand tools for computer hardware servicing. It includes the development team who created the module, as well as copyright information. The module is divided into three topics: preparing hand tools, using appropriate hand tools and test equipment, and maintaining hand tools. It discusses the importance of selecting the proper tools for jobs and using tools safely.
Q3-Computer-Systems-Servicing-NC-II-11-Module-1.pdf
The document provides information about a module on preparing hand tools for Computer Systems Servicing NC II. It discusses the module outline, copyright information, writers and reviewers. It introduces the module and provides tips for learners and facilitators. The module will teach learners to plan tasks, prepare hand tools, and appreciate their importance in Computer Systems Servicing. It includes several activities for learners to complete.
Computer Hand Tools_Presentation
This document provides information on tools used for computer system servicing. It defines key terms like hand tools, equipment, computer technician, and personal protective equipment. It groups various tools into categories of hand tools, electro-static discharge tools, cleaning tools, and diagnostic tools. Examples are given of common tools like screwdrivers, pliers, flashlights, tweezers, and compressed air. The document describes having students identify the appropriate tools for tasks like opening a system unit, checking voltage, and cleaning dust. It provides rubrics for evaluating students on tool selection accuracy, presentation, and cooperation. As an assignment, students are asked to research ways to clean a personal computer.
CHS Tools
This document discusses tools used for computer hardware servicing. It defines tools and their purposes, including hand tools like screwdrivers, pliers and tweezers. Electro-static discharge tools like anti-static wrist straps and mats are recommended to prevent static electricity damage. Cleaning tools like compressed air and lint-free cloths help maintain components without scratching. Diagnostic tools like multimeters and loopback adapters test circuit integrity and port functionality. Maintaining properly functioning tools is important for safety and completing repairs on computer hardware.
LAS1-CSSweek1 tnhs.docx
1) The document is a learning activity sheet for Computer Systems Servicing focusing on using and maintaining hand tools. It provides background information on proper tool selection and safe tool use.
2) It discusses four categories of computer hardware servicing tools: ESD tools to prevent electrostatic discharge damage, hand tools like screwdrivers and pliers, cleaning tools like compressed air and lint-free cloths, and diagnostic tools like multimeters.
3) The activity section provides exercises for learners to identify tools based on descriptions and give their functions. Guide questions at the end reinforce the importance of tool maintenance, knowledge of tool functions, and use of protective equipment.
TLE 10 week 2 - Use of Hand Tools and Equipment in Computer.pptx
This document lists and describes various hardware tools used for computer hardware servicing and maintenance. It discusses electro-static discharge (ESD) tools like anti-static wrist straps and mats used to prevent static electricity damage. It also outlines different types of hand tools including screwdrivers, pliers and tweezers. Cleaning tools like compressed air and lint-free clothes are also noted. Finally, diagnostic tools such as multimeters and loopback adapters used for testing computer components are covered.
G7 JOHN - Copy.pptx
This document discusses computer hardware servicing tools. It defines computer hardware servicing as repairs and maintenance on the physical components of computers and peripherals. It then discusses four categories of hardware tools: electro-static discharge tools to prevent static electricity damage; hand tools like screwdrivers and pliers for physical manipulation; cleaning tools like compressed air and lint-free cloths; and diagnostic tools like multimeters and loopback adapters to test computer components and circuits. The document provides examples of common tools in each category and their purposes.
Recommended
Quiz in Tools in Computer System Servicing.pptx
Multimeter, network cable tester, zip ties, compressed air, Phillips head screwdriver, nut driver, flat head screwdriver, anti-static wrist strap, tweezers, cotton swabs, small parts tray, wire strippers. These tools are used for testing components, organizing cables, removing dust, fastening screws and nuts, retrieving small parts, cleaning components, and handling wires when servicing computer systems.
Grade8_Q1-4_W1_HandTools.pdf
This document provides information about a module on using and maintaining hand tools for computer hardware servicing. It includes the development team who created the module, as well as copyright information. The module is divided into three topics: preparing hand tools, using appropriate hand tools and test equipment, and maintaining hand tools. It discusses the importance of selecting the proper tools for jobs and using tools safely.
Q3-Computer-Systems-Servicing-NC-II-11-Module-1.pdf
The document provides information about a module on preparing hand tools for Computer Systems Servicing NC II. It discusses the module outline, copyright information, writers and reviewers. It introduces the module and provides tips for learners and facilitators. The module will teach learners to plan tasks, prepare hand tools, and appreciate their importance in Computer Systems Servicing. It includes several activities for learners to complete.
Computer Hand Tools_Presentation
This document provides information on tools used for computer system servicing. It defines key terms like hand tools, equipment, computer technician, and personal protective equipment. It groups various tools into categories of hand tools, electro-static discharge tools, cleaning tools, and diagnostic tools. Examples are given of common tools like screwdrivers, pliers, flashlights, tweezers, and compressed air. The document describes having students identify the appropriate tools for tasks like opening a system unit, checking voltage, and cleaning dust. It provides rubrics for evaluating students on tool selection accuracy, presentation, and cooperation. As an assignment, students are asked to research ways to clean a personal computer.
CHS Tools
This document discusses tools used for computer hardware servicing. It defines tools and their purposes, including hand tools like screwdrivers, pliers and tweezers. Electro-static discharge tools like anti-static wrist straps and mats are recommended to prevent static electricity damage. Cleaning tools like compressed air and lint-free cloths help maintain components without scratching. Diagnostic tools like multimeters and loopback adapters test circuit integrity and port functionality. Maintaining properly functioning tools is important for safety and completing repairs on computer hardware.
LAS1-CSSweek1 tnhs.docx
1) The document is a learning activity sheet for Computer Systems Servicing focusing on using and maintaining hand tools. It provides background information on proper tool selection and safe tool use.
2) It discusses four categories of computer hardware servicing tools: ESD tools to prevent electrostatic discharge damage, hand tools like screwdrivers and pliers, cleaning tools like compressed air and lint-free cloths, and diagnostic tools like multimeters.
3) The activity section provides exercises for learners to identify tools based on descriptions and give their functions. Guide questions at the end reinforce the importance of tool maintenance, knowledge of tool functions, and use of protective equipment.
TLE 10 week 2 - Use of Hand Tools and Equipment in Computer.pptx
This document lists and describes various hardware tools used for computer hardware servicing and maintenance. It discusses electro-static discharge (ESD) tools like anti-static wrist straps and mats used to prevent static electricity damage. It also outlines different types of hand tools including screwdrivers, pliers and tweezers. Cleaning tools like compressed air and lint-free clothes are also noted. Finally, diagnostic tools such as multimeters and loopback adapters used for testing computer components are covered.
G7 JOHN - Copy.pptx
This document discusses computer hardware servicing tools. It defines computer hardware servicing as repairs and maintenance on the physical components of computers and peripherals. It then discusses four categories of hardware tools: electro-static discharge tools to prevent static electricity damage; hand tools like screwdrivers and pliers for physical manipulation; cleaning tools like compressed air and lint-free cloths; and diagnostic tools like multimeters and loopback adapters to test computer components and circuits. The document provides examples of common tools in each category and their purposes.
Proper Use of Tools
This section describes and covers the proper use of a variety of hardware, software, and organizational tools specific to working with computers and peripherals.
COMPUTER HARDWARE TOOLS IN CHS AND CSS
Here is a draft matrix on computer maintenance plan:
COMPUTER MAINTENANCE PLAN
COMPONENTS TO CLEAN/REPAIR SCHEDULE Tools to use
Computer case Daily/Every other day Lint-free cloth, compressed air
Monitor Weekly Lint-free cloth
Keyboard Monthly Lint-free cloth
Mouse Weekly Lint-free cloth
Inside components of Processing Bi-annually/Annually Multimeter, compressed air, lint-free cloth
Unit
Hard drive Annually Compressed air
RAM Every 6 months Compressed air
Processor fan Every 6 months Compressed air
Power supply Every year Compressed air
Optical drive (CD/DVD ROM) Monthly Compressed
CREATIVE TECHNOLOGY 7 QI-L3
The document provides information about maintaining hand tools, computer equipment, and electronic systems. It outlines four learning competencies, which are to identify different tools and their functions, work collaboratively to prepare a safety brochure, follow procedures for cleaning and simple repairs, and determine common malfunctions. The document defines various tools, including those for electrostatic discharge protection, hand tools, cleaning, and diagnostics. It also defines computer equipment and electronic systems.
OBTAIN TOOLS, EQUIPMENT AND TESTING DEVICES
A tool is a handheld device that aids in accomplishing a tasks. Tools range from a traditional metal cutting part of a machine to an element of a computer program that activates and controls a particular function.
Lesson 6 conducting simple electrical gadgets
The document discusses materials and tools used in making electrical gadgets. It lists learning objectives which include understanding and constructing simple electrical gadgets. It identifies various tools like pliers, screwdrivers, and materials like wires, switches, and discusses their proper uses. The document provides activities for students to identify, draw, and discuss tools and materials. It emphasizes safety practices like wearing gloves and inspecting tools when working with electricity.
Computer harware serving information communication and technology lesson 2
This document provides an overview of the tools needed for hardware servicing and repair of PCs. It discusses electro-static discharge tools like anti-static wrist straps and mats to prevent static damage. It also outlines categories of hand tools, cleaning tools, and diagnostic tools. Specific tools are described within each category along with proper usage of electro-static discharge tools, hand tools, and cleaning materials when servicing hardware.
MODULE 3- Q4 - Copy MODULE IN CSS- Copy.pptx
This document provides an overview of testing methods for electronic components. It discusses four main testing methods: 1) automated testing which uses computer-controlled equipment to test components efficiently; 2) debugging to detect and fix errors in software; 3) electronic component inspection to check components meet standards; and 4) platform testing to ensure hardware and software work together properly. The document emphasizes the importance of testing components to find problems and ensure quality before and after building circuits. Without testing, electronic equipment may not function correctly or develop failures over time.
INPUT and OUTPUT devices in Information Communication Technology .pptx
INPUT DEVICES – Are compose of devices that accepts data and instructions from the user or from other computer system.
OUTPUT DEVICES – Is any piece of computer hardware that displays results after the computer has processed the unput data that has been entered.
Css 2 ndsem_q3_usedofhandtools 2222
This document provides information about computer hardware tools used in computer system servicing. It defines various tools categorized as ESD, hand, cleaning, and diagnostic tools. Examples are given for each type of tool along with descriptions of their proper uses and safety procedures. The objectives and terms are also defined. Interactive portions provide questions to test understanding of identifying different tools from images and their uses. Activities at the end instruct the learner to choose 5 tools to describe their uses and how to use them safely.
Consumer electronics-servicing-learning-module
Here are the answers to the self-check questions:
1. A low-power soldering iron (20-30 Watts) is suitable for electrical work because it allows for precise soldering of small wires and components without risk of overheating or damage from excess heat.
2. Screwdrivers should not be used as pry bars, chisels, punches, etc. because it can damage the tip of the screwdriver or cause it to slip and cause injury. Screwdrivers are designed specifically for turning screws only.
3. Pliers should not be used as hammers because the force could cause the pliers to bend or crack, damaging them. Pliers are designed for
Computer-hardware-tools PPT.pptx
1. The document discusses various tools used for computer hardware maintenance and repair, including flat head screwdrivers, needle-nose pliers, multi-meters, and anti-static wrist straps.
2. It explains that static electricity can damage computer equipment and that anti-static wrist straps and mats help control electrostatic discharge.
3. Cleaning tools like lint-free clothes and compressed air are also discussed for safely cleaning internal computer components without leaving debris.
CSS W1.pptx
The document provides guidance on selecting, using, maintaining, and storing various hand tools needed for computer system servicing. It discusses four categories of tools: hand tools, electro-static discharge tools, diagnostic tools, and cleaning tools. Specific tools are identified for different tasks like screwing, soldering, crimping wires. Proper use and maintenance of tools is emphasized to keep them in safe and usable condition and prevent damage to electronic components. Tools should be stored properly and maintained according to manufacturer guidelines.
K to 12 electronics learning module
Here are some key points to remember in using hand tools properly:
- Use the right tool for the job. Do not force a tool to do something it is not designed for.
- Inspect tools before use to ensure they are in good working condition with no broken or missing parts.
- Operate tools carefully according to their design. Do not abuse tools by hammering with pliers, prying with screwdrivers, etc.
- Cut, bend or shape materials slowly and deliberately. Do not force or jerk tools suddenly.
- Keep tools sharp, clean and well-maintained. Replace worn, broken or dull cutting blades, bits or other parts.
- Store tools properly when not in use to prevent damage
TLE CES NC II Y2 - Module 1 - Using Basic Electronic Hand Tools.doc
TLE CES NC II CBLM
Y2 - Module 1 - Using Basic Electronic Hand Tools
Unit of Competency: USE BASIC ELECTRONIC HAND TOOLS
Module No. 1 Module Title: USING BASIC ELECTRONIC HAND TOOLS
Welcome to the Module “Using Basic Electronic Hand Tools”. This module contains training materials and activities for you to complete.
The unit of competency “Use Basic Electronic Hand Tools” contains the knowledge, skills and desirable attitudes required for a Consumer Electronic Servicing required to obtain the National Certificate (NC) level II.
You are required to go through a series of learning activities in order to complete each of the learning outcomes of the module. In each learning outcome there are Information Sheets, Job Sheets, Assignment Sheets, and Activity Sheets. Follow these activities on your own and answer the Self-Check at the end of each learning activity.
lesson6conductingsimpleelectricalgadgets-200907013129.pptx
The document discusses basic electrical tools like pliers, screwdrivers, and soldering guns used to make simple electrical gadgets along with materials like wires and plugs. It also provides safety tips for working with electricity like wearing gloves and inspecting tools. A question and answer section covers common questions about tools for electrical repairs and materials for making an extension cord.
Grade 7 Detailed Lesson Plan 2
The document provides a detailed lesson plan on proper tool use for computer hardware servicing. It includes 7 objectives, 4 procedures, and assessment activities. The key points covered are:
1. Identifying appropriate tools for equalizing electrical charge, tightening screws, and tightening hex bolts.
2. Explaining proper use of antistatic wrist straps, antistatic mats, screwdrivers, and hex drivers.
3. Detailing cleaning procedures for computer cases, screens, components, keyboards, and mice using compressed air and cleaning solutions.
Consumer electronics learning module
1. Basic hand tools for electronics servicing include screwdrivers, soldering tools, splicing tools, boring tools, cutting tools, and auxiliary tools. Common tools are slotted and Phillips screwdrivers, soldering iron, desoldering tool, long nose pliers, side cutters, wire strippers, electric drill, hacksaw, magnifying glass, and paint brush.
2. Important electronic equipment include the volt-ohm-milliammeter for measuring voltage, resistance, and current, oscilloscope for viewing signal waveforms, and signal generator for producing test waveforms. Proper maintenance of these equipment is needed
K to 12_electronics_learning_module
The document provides guidance on using various hand tools for consumer electronics servicing, including screwdrivers, soldering tools, splicing tools, drilling tools, cutting tools, and auxiliary tools. It also covers safety precautions and common faults to avoid when using hand tools. The document is meant to teach students in grades 7 and 8 the basic skills needed for consumer electronics servicing.
K to 12 Electronics Learning Module
The document provides guidance on using various hand tools for consumer electronics servicing, including screwdrivers, soldering tools, splicing tools, drilling tools, cutting tools, and auxiliary tools. It also covers safety precautions and common faults to avoid when using hand tools. The document is meant to teach students in grades 7 and 8 the basic skills needed for consumer electronics servicing.
k_to_12_electronics_learning_module.pdf
The document provides guidance on using various hand tools for consumer electronics servicing, including screwdrivers, soldering tools, splicing tools, drilling tools, cutting tools, and auxiliary tools. It also covers safety precautions and common faults to avoid when using hand tools. The document is meant to teach students in grades 7 and 8 the basic skills needed for consumer electronics servicing.
English for Academic Purposes Quiz1.pptx
This document provides a quiz on key concepts in English for Academic Purposes. It asks 10 multiple choice questions to test understanding of academic writing topics like what is English for Academic Purposes, examples of academic writing genres, defining terms like subject, tone, message, vocabulary, audience, point of view and which point of view is generally used in academic writing.
Turn-over & installation ceremony.pptx
The document outlines an agenda for a Turn-Over & Installation Ceremony taking place on March 23rd, 2022 at 10:00 AM. The ceremony will include an invocation, national anthem, opening remarks, intermission, send off messages, turning over of responsibility keys, an acceptance message, installation message, and closing remarks to thank attendees.
More Related Content
Similar to LO1 and 2 Formative Test.pptx
Proper Use of Tools
This section describes and covers the proper use of a variety of hardware, software, and organizational tools specific to working with computers and peripherals.
COMPUTER HARDWARE TOOLS IN CHS AND CSS
Here is a draft matrix on computer maintenance plan:
COMPUTER MAINTENANCE PLAN
COMPONENTS TO CLEAN/REPAIR SCHEDULE Tools to use
Computer case Daily/Every other day Lint-free cloth, compressed air
Monitor Weekly Lint-free cloth
Keyboard Monthly Lint-free cloth
Mouse Weekly Lint-free cloth
Inside components of Processing Bi-annually/Annually Multimeter, compressed air, lint-free cloth
Unit
Hard drive Annually Compressed air
RAM Every 6 months Compressed air
Processor fan Every 6 months Compressed air
Power supply Every year Compressed air
Optical drive (CD/DVD ROM) Monthly Compressed
CREATIVE TECHNOLOGY 7 QI-L3
The document provides information about maintaining hand tools, computer equipment, and electronic systems. It outlines four learning competencies, which are to identify different tools and their functions, work collaboratively to prepare a safety brochure, follow procedures for cleaning and simple repairs, and determine common malfunctions. The document defines various tools, including those for electrostatic discharge protection, hand tools, cleaning, and diagnostics. It also defines computer equipment and electronic systems.
OBTAIN TOOLS, EQUIPMENT AND TESTING DEVICES
A tool is a handheld device that aids in accomplishing a tasks. Tools range from a traditional metal cutting part of a machine to an element of a computer program that activates and controls a particular function.
Lesson 6 conducting simple electrical gadgets
The document discusses materials and tools used in making electrical gadgets. It lists learning objectives which include understanding and constructing simple electrical gadgets. It identifies various tools like pliers, screwdrivers, and materials like wires, switches, and discusses their proper uses. The document provides activities for students to identify, draw, and discuss tools and materials. It emphasizes safety practices like wearing gloves and inspecting tools when working with electricity.
Computer harware serving information communication and technology lesson 2
This document provides an overview of the tools needed for hardware servicing and repair of PCs. It discusses electro-static discharge tools like anti-static wrist straps and mats to prevent static damage. It also outlines categories of hand tools, cleaning tools, and diagnostic tools. Specific tools are described within each category along with proper usage of electro-static discharge tools, hand tools, and cleaning materials when servicing hardware.
MODULE 3- Q4 - Copy MODULE IN CSS- Copy.pptx
This document provides an overview of testing methods for electronic components. It discusses four main testing methods: 1) automated testing which uses computer-controlled equipment to test components efficiently; 2) debugging to detect and fix errors in software; 3) electronic component inspection to check components meet standards; and 4) platform testing to ensure hardware and software work together properly. The document emphasizes the importance of testing components to find problems and ensure quality before and after building circuits. Without testing, electronic equipment may not function correctly or develop failures over time.
INPUT and OUTPUT devices in Information Communication Technology .pptx
INPUT DEVICES – Are compose of devices that accepts data and instructions from the user or from other computer system.
OUTPUT DEVICES – Is any piece of computer hardware that displays results after the computer has processed the unput data that has been entered.
Css 2 ndsem_q3_usedofhandtools 2222
This document provides information about computer hardware tools used in computer system servicing. It defines various tools categorized as ESD, hand, cleaning, and diagnostic tools. Examples are given for each type of tool along with descriptions of their proper uses and safety procedures. The objectives and terms are also defined. Interactive portions provide questions to test understanding of identifying different tools from images and their uses. Activities at the end instruct the learner to choose 5 tools to describe their uses and how to use them safely.
Consumer electronics-servicing-learning-module
Here are the answers to the self-check questions:
1. A low-power soldering iron (20-30 Watts) is suitable for electrical work because it allows for precise soldering of small wires and components without risk of overheating or damage from excess heat.
2. Screwdrivers should not be used as pry bars, chisels, punches, etc. because it can damage the tip of the screwdriver or cause it to slip and cause injury. Screwdrivers are designed specifically for turning screws only.
3. Pliers should not be used as hammers because the force could cause the pliers to bend or crack, damaging them. Pliers are designed for
Computer-hardware-tools PPT.pptx
1. The document discusses various tools used for computer hardware maintenance and repair, including flat head screwdrivers, needle-nose pliers, multi-meters, and anti-static wrist straps.
2. It explains that static electricity can damage computer equipment and that anti-static wrist straps and mats help control electrostatic discharge.
3. Cleaning tools like lint-free clothes and compressed air are also discussed for safely cleaning internal computer components without leaving debris.
CSS W1.pptx
The document provides guidance on selecting, using, maintaining, and storing various hand tools needed for computer system servicing. It discusses four categories of tools: hand tools, electro-static discharge tools, diagnostic tools, and cleaning tools. Specific tools are identified for different tasks like screwing, soldering, crimping wires. Proper use and maintenance of tools is emphasized to keep them in safe and usable condition and prevent damage to electronic components. Tools should be stored properly and maintained according to manufacturer guidelines.
K to 12 electronics learning module
Here are some key points to remember in using hand tools properly:
- Use the right tool for the job. Do not force a tool to do something it is not designed for.
- Inspect tools before use to ensure they are in good working condition with no broken or missing parts.
- Operate tools carefully according to their design. Do not abuse tools by hammering with pliers, prying with screwdrivers, etc.
- Cut, bend or shape materials slowly and deliberately. Do not force or jerk tools suddenly.
- Keep tools sharp, clean and well-maintained. Replace worn, broken or dull cutting blades, bits or other parts.
- Store tools properly when not in use to prevent damage
TLE CES NC II Y2 - Module 1 - Using Basic Electronic Hand Tools.doc
TLE CES NC II CBLM
Y2 - Module 1 - Using Basic Electronic Hand Tools
Unit of Competency: USE BASIC ELECTRONIC HAND TOOLS
Module No. 1 Module Title: USING BASIC ELECTRONIC HAND TOOLS
Welcome to the Module “Using Basic Electronic Hand Tools”. This module contains training materials and activities for you to complete.
The unit of competency “Use Basic Electronic Hand Tools” contains the knowledge, skills and desirable attitudes required for a Consumer Electronic Servicing required to obtain the National Certificate (NC) level II.
You are required to go through a series of learning activities in order to complete each of the learning outcomes of the module. In each learning outcome there are Information Sheets, Job Sheets, Assignment Sheets, and Activity Sheets. Follow these activities on your own and answer the Self-Check at the end of each learning activity.
lesson6conductingsimpleelectricalgadgets-200907013129.pptx
The document discusses basic electrical tools like pliers, screwdrivers, and soldering guns used to make simple electrical gadgets along with materials like wires and plugs. It also provides safety tips for working with electricity like wearing gloves and inspecting tools. A question and answer section covers common questions about tools for electrical repairs and materials for making an extension cord.
Grade 7 Detailed Lesson Plan 2
The document provides a detailed lesson plan on proper tool use for computer hardware servicing. It includes 7 objectives, 4 procedures, and assessment activities. The key points covered are:
1. Identifying appropriate tools for equalizing electrical charge, tightening screws, and tightening hex bolts.
2. Explaining proper use of antistatic wrist straps, antistatic mats, screwdrivers, and hex drivers.
3. Detailing cleaning procedures for computer cases, screens, components, keyboards, and mice using compressed air and cleaning solutions.
Consumer electronics learning module
1. Basic hand tools for electronics servicing include screwdrivers, soldering tools, splicing tools, boring tools, cutting tools, and auxiliary tools. Common tools are slotted and Phillips screwdrivers, soldering iron, desoldering tool, long nose pliers, side cutters, wire strippers, electric drill, hacksaw, magnifying glass, and paint brush.
2. Important electronic equipment include the volt-ohm-milliammeter for measuring voltage, resistance, and current, oscilloscope for viewing signal waveforms, and signal generator for producing test waveforms. Proper maintenance of these equipment is needed
K to 12_electronics_learning_module
The document provides guidance on using various hand tools for consumer electronics servicing, including screwdrivers, soldering tools, splicing tools, drilling tools, cutting tools, and auxiliary tools. It also covers safety precautions and common faults to avoid when using hand tools. The document is meant to teach students in grades 7 and 8 the basic skills needed for consumer electronics servicing.
K to 12 Electronics Learning Module
The document provides guidance on using various hand tools for consumer electronics servicing, including screwdrivers, soldering tools, splicing tools, drilling tools, cutting tools, and auxiliary tools. It also covers safety precautions and common faults to avoid when using hand tools. The document is meant to teach students in grades 7 and 8 the basic skills needed for consumer electronics servicing.
k_to_12_electronics_learning_module.pdf
The document provides guidance on using various hand tools for consumer electronics servicing, including screwdrivers, soldering tools, splicing tools, drilling tools, cutting tools, and auxiliary tools. It also covers safety precautions and common faults to avoid when using hand tools. The document is meant to teach students in grades 7 and 8 the basic skills needed for consumer electronics servicing.
Similar to LO1 and 2 Formative Test.pptx (20)
Computer harware serving information communication and technology lesson 2
Computer harware serving information communication and technology lesson 2
INPUT and OUTPUT devices in Information Communication Technology .pptx
INPUT and OUTPUT devices in Information Communication Technology .pptx
TLE CES NC II Y2 - Module 1 - Using Basic Electronic Hand Tools.doc
TLE CES NC II Y2 - Module 1 - Using Basic Electronic Hand Tools.doc
lesson6conductingsimpleelectricalgadgets-200907013129.pptx
lesson6conductingsimpleelectricalgadgets-200907013129.pptx
More from LouiglenPacana2
English for Academic Purposes Quiz1.pptx
This document provides a quiz on key concepts in English for Academic Purposes. It asks 10 multiple choice questions to test understanding of academic writing topics like what is English for Academic Purposes, examples of academic writing genres, defining terms like subject, tone, message, vocabulary, audience, point of view and which point of view is generally used in academic writing.
Turn-over & installation ceremony.pptx
The document outlines an agenda for a Turn-Over & Installation Ceremony taking place on March 23rd, 2022 at 10:00 AM. The ceremony will include an invocation, national anthem, opening remarks, intermission, send off messages, turning over of responsibility keys, an acceptance message, installation message, and closing remarks to thank attendees.
Workplace-by-Facebook.pptx
The document provides instructions on how to create a Workplace account and highlights key features of the Workplace platform including connecting, communicating, collaborating, staying up to date with news feeds, planning events, using groups, live video broadcasting, workplace chat, and voice/video calls. It also mentions integrating Workplace with existing work tools.
demo.pptx
This document discusses arts and crafts from the Mindanao region of the Philippines. It lists examples of arts from different Mindanao ethnic groups, then defines the elements and principles of art. Students will create an artwork inspired by Mindanao arts using given materials, applying elements and principles of design. They will present their work and discuss what art it draws from, elements used, and how the activity helped them appreciate Mindanao styles.
demo amans.pptx
This document discusses different tools used for measurement and units of measurement in both the English and metric systems. It provides definitions and conversion formulas between units. The key points are:
- Rulers, tape measures, meter sticks, and triangles are tools used for measurement in technical drawing and construction.
- The English system uses inches, feet, yards, and miles while the metric system uses millimeters, centimeters, decimeters, meters, and kilometers.
- Conversion formulas are provided, such as 12 inches = 1 foot and 10 millimeters = 1 centimeter.
- Activities are included to practice conversions between English and metric units of linear measurement.
A Basic Terms PowerPoint.pptx
This document provides definitions and explanations of basic computer hardware and software terms. It discusses what a computer is and the basic components involved in information processing, including input, processing, storage, and output. It then defines and describes common input devices like keyboards, mice, scanners, and microphones. Output devices covered include monitors, printers, speakers, and projectors. The document also discusses storage devices, peripherals, and some other specialized hardware like graphics tablets, biometric devices, and plotters.
More from LouiglenPacana2 (8)
Recently uploaded
Apps Break Data
How information systems are built or acquired puts information, which is what they should be about, in a secondary place. Our language adapted accordingly, and we no longer talk about information systems but applications. Applications evolved in a way to break data into diverse fragments, tightly coupled with applications and expensive to integrate. The result is technical debt, which is re-paid by taking even bigger "loans", resulting in an ever-increasing technical debt. Software engineering and procurement practices work in sync with market forces to maintain this trend. This talk demonstrates how natural this situation is. The question is: can something be done to reverse the trend?
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Astute Business Solutions | Oracle Cloud Partner |
Your goto partner for Oracle Cloud, PeopleSoft, E-Business Suite, and Ellucian Banner. We are a firm specialized in managed services and consulting.
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
Public CyberSecurity Awareness Presentation 2024.pptx
Cyber security awareness slides for a busisness by TreeTop Security
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
The typical problem in product engineering is not bad strategy, so much as “no strategy”. This leads to confusion, lack of motivation, and incoherent action. The next time you look for a strategy and find an empty space, instead of waiting for it to be filled, I will show you how to fill it in yourself. If you’re wrong, it forces a correction. If you’re right, it helps create focus. I’ll share how I’ve approached this in the past, both what works and lessons for what didn’t work so well.
Recently uploaded (20)
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Astute Business Solutions | Oracle Cloud Partner |
Astute Business Solutions | Oracle Cloud Partner |
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
Public CyberSecurity Awareness Presentation 2024.pptx
Public CyberSecurity Awareness Presentation 2024.pptx
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
LO1 and 2 Formative Test.pptx
- 1. LO1 and 2 Formative Test By Louiglen E. Pacana
- 2. Directions: 1. Read and understand each definitions and provide the concrete word that the definitions defines. 1. Example: A device for performing work on a material or a physical system using only hands. Ans: Hand Tool 2. First 5 to get a highest score will have the opportunity to choose his/her partner in our next CSS activity.
- 3. Give what is ask 1. used to avoid contact in our body and other objects. 2. sometimes called a nut driver. 3. used to retrieve parts from small and tight location. 4. used to manipulate small parts. 5. Prevents the sudden flow of electricity to avoid damage Your computer components and parts.
- 4. Give what is ask 6. used to test the performance of your network cables. 7. used to clean different computer components without scratching or leaving debris. 8. tools to check and test every components and port of the computer system. 9. used to strip and cut wires. 10. used to loosen or tighten screws that have a star- like head.
- 5. Give what is ask 11. used to test the functionality of computer ports. 12. used to test the integrity of circuits 13. is essential when maintaining or repairing computers. 14. used to blow away dust and debris from different computer parts without touching the components. 15. used to loosen or tighten crosshead (+) screws.