LISUN Test corners
•
0 likes•27 views
世
世满 江This document summarizes the key details of a test corners product: 1. The test corners are used for temperature rise testing and have dimensions of 800x800x1000mm. 2. It can measure the temperature at 48 points, covering 100x100mm areas with thermocouples less than 0.3mm in diameter. 3. The test corners consist of plywood covered in non-light black paint and gray film board, and include a set of corners, spare brass plates, and thermocouple wiring.
Report
Share
Report
Share
Download to read offline
Recommended
Resume
Mamadou Balde is a PhD student in metallurgy and mechanical engineering at EMSE in Saint-Etienne, France. His research focuses on developing new aluminum alloys using die casting and forging with investigations into microstructure. He has work experience in process engineering, research engineering, and teaching. Balde has published papers on microstructural optimization and investigations and has skills in materials characterization, modeling, and mechanical testing.
Resume
This document contains a summary of Mamadou Balde's professional background and qualifications. It lists his current address in France, contact information, and professional objectives of developing team management skills and gaining hands-on experience in research and development. His current position involves metallurgical expertise and R&D on new aluminum alloys using die casting and forging plants for a French automotive supplier. He has work experience in process engineering, research, and teaching. He has published papers and given presentations on microstructural optimization and properties of aluminum alloys. His scientific skills include mechanical testing, microstructural characterization, modeling, and materials synthesis and processing techniques.
App140 en functional-testing-cordless-wet-shavers
The document describes functional testing of cordless wet shavers using a Laser High-Speed Micrometer. The micrometer measures vibration amplitude and frequency of assembled shavers on the production line. It uses a non-contact ThruBeam measurement technique that is not affected by the material or alignment of the shaver, providing accurate measurements within a 400 μm range at 150 Hz. The optoCONTROL 2500-35 system was selected for its independence from the target material and easy positioning without measurement errors from misalignment.
LISUN Rohs Testing EDX-2
Rapid development of global economy brings serious environmental issues, which is becoming the focus of all around the world. The RoHS directive EU announced on Feb 13th of 2003 became effective on Jul 1st of 2007 for the purchase of restricting the pollution caused by the dispose of electronic and electrical products. Facing this environmental protection requirement, after years of hard work on R&D, Lisun has successfully developed EDX serious EDXRF spectrometer. EDXRF can detect and measure the hazardous substances restricted in RoHS directive quickly, precisely and nondestructively.
LISUN Oxygen bomb YD-KD
This document summarizes the technical specifications of an oxygen bomb aging tester. The oxygen bomb aging tester is used to test polymer materials like wire and cable insulation under pressure and temperature conditions in oxygen or compressed air. It has a maximum working pressure of 4.0MPa and can self-control the temperature from 0 to 200°C. The oxygen bomb tester uses oxygen as the test medium at 70°C and 2.1MPa, while the air bomb tester uses air at 127°C and 0.55MPa. It has a tank volume of 4000cm3, intelligent digital temperature control, and is made of stainless steel inside and cold rolled steel plate outside.
Ccd spectroradiometer-integrating-sphere-compact-system-for-led-7000vis
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for photometric, colorimetric and electrical measurement.
Ccd spectroradiometer-integrating-sphere-compact-system-for-led-7000vis
Lisun Electronics provides a summary of the test report:
1. The report tests a DG-11 LED product from GE Lighting with specifications of 220V/8W.
2. Key test results include a luminous flux of 744.13lm, efficacy of 99.88lm/W, CRI of 82.0, and CCT of 2966K.
3. The report provides photometric, colorimetric, electric, and test information for the LED product.
Lisun Electronic ballast-tester WT5000
This document summarizes the features and specifications of the WT5000 electronic ballast tester. It can test the input and output parameters of electronic ballasts, including voltage, current, power, frequency, and harmonics. Key features include a large LCD display, sampling up to 10MHz for high frequency analysis, and communication with a PC. The WT5000 can test parameters during normal operation and startup, and analyze envelope waves and preheating energy curves. It provides accurate testing of ballasts according to industry standards with a portable design suitable for development and production.
Recommended
Resume
Mamadou Balde is a PhD student in metallurgy and mechanical engineering at EMSE in Saint-Etienne, France. His research focuses on developing new aluminum alloys using die casting and forging with investigations into microstructure. He has work experience in process engineering, research engineering, and teaching. Balde has published papers on microstructural optimization and investigations and has skills in materials characterization, modeling, and mechanical testing.
Resume
This document contains a summary of Mamadou Balde's professional background and qualifications. It lists his current address in France, contact information, and professional objectives of developing team management skills and gaining hands-on experience in research and development. His current position involves metallurgical expertise and R&D on new aluminum alloys using die casting and forging plants for a French automotive supplier. He has work experience in process engineering, research, and teaching. He has published papers and given presentations on microstructural optimization and properties of aluminum alloys. His scientific skills include mechanical testing, microstructural characterization, modeling, and materials synthesis and processing techniques.
App140 en functional-testing-cordless-wet-shavers
The document describes functional testing of cordless wet shavers using a Laser High-Speed Micrometer. The micrometer measures vibration amplitude and frequency of assembled shavers on the production line. It uses a non-contact ThruBeam measurement technique that is not affected by the material or alignment of the shaver, providing accurate measurements within a 400 μm range at 150 Hz. The optoCONTROL 2500-35 system was selected for its independence from the target material and easy positioning without measurement errors from misalignment.
LISUN Rohs Testing EDX-2
Rapid development of global economy brings serious environmental issues, which is becoming the focus of all around the world. The RoHS directive EU announced on Feb 13th of 2003 became effective on Jul 1st of 2007 for the purchase of restricting the pollution caused by the dispose of electronic and electrical products. Facing this environmental protection requirement, after years of hard work on R&D, Lisun has successfully developed EDX serious EDXRF spectrometer. EDXRF can detect and measure the hazardous substances restricted in RoHS directive quickly, precisely and nondestructively.
LISUN Oxygen bomb YD-KD
This document summarizes the technical specifications of an oxygen bomb aging tester. The oxygen bomb aging tester is used to test polymer materials like wire and cable insulation under pressure and temperature conditions in oxygen or compressed air. It has a maximum working pressure of 4.0MPa and can self-control the temperature from 0 to 200°C. The oxygen bomb tester uses oxygen as the test medium at 70°C and 2.1MPa, while the air bomb tester uses air at 127°C and 0.55MPa. It has a tank volume of 4000cm3, intelligent digital temperature control, and is made of stainless steel inside and cold rolled steel plate outside.
Ccd spectroradiometer-integrating-sphere-compact-system-for-led-7000vis
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for photometric, colorimetric and electrical measurement.
Ccd spectroradiometer-integrating-sphere-compact-system-for-led-7000vis
Lisun Electronics provides a summary of the test report:
1. The report tests a DG-11 LED product from GE Lighting with specifications of 220V/8W.
2. Key test results include a luminous flux of 744.13lm, efficacy of 99.88lm/W, CRI of 82.0, and CCT of 2966K.
3. The report provides photometric, colorimetric, electric, and test information for the LED product.
Lisun Electronic ballast-tester WT5000
This document summarizes the features and specifications of the WT5000 electronic ballast tester. It can test the input and output parameters of electronic ballasts, including voltage, current, power, frequency, and harmonics. Key features include a large LCD display, sampling up to 10MHz for high frequency analysis, and communication with a PC. The WT5000 can test parameters during normal operation and startup, and analyze envelope waves and preheating energy curves. It provides accurate testing of ballasts according to industry standards with a portable design suitable for development and production.
Single angles gloss meter
It used in the surface gloss measurement for paint, plastic, metal, ceramics, building materials and so on. Our gloss meter conform to the DIN 67530, ISO 2813, ASTM D 523, JIS Z8741, BS 3900 Part D5, JJG696 standards
UV aging test Chamber
The chamber fully complies with the requirements of Standard GB/T16585-1996, GB14522-93, GB/T16422.3-97, ASTMG53 and etc., provides the best UV sunlight simulation, and is easy to use and operate.
Ccd spectroradiometer-integrating-sphere-compact-system-for-led-7000vis
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for photometric and colorimetric measurement of luminaries such as LEDs, LED luminaires, Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium lamps and high voltage mercury lamps) and CCFL. The measured data meets the requirements of CIE, EN and LM-79 clause 9.1 for the measurement of photometry and colorimetry.
Goniospectroradiometers lsg-1600bccd
LSG-1600BCCD Goniophotometric System carries out measuring methods of fixed location and rotating luminaires.
Goniospectroradiometers lsg-1600bccd
This document provides specifications for the Lisun Electronics Inc. Rotation Luminaire Goniophotometer (LSG-1600BCCD). Key details include:
- It measures photometric parameters of luminaires like intensity distribution curves and efficiency.
- Testing meets standards like CIE, IEC, IES. Angular accuracy is 0.2 degrees and photometry accuracy is Class A.
- The luminaire under test rotates ±180 degrees horizontally and ±180 degrees vertically. Intensity is measured from 0.001 to 10,000 lux.
Spectral Colorimeter
It is adopts the theory of spectrophotometer. It used for plastic, printing, paint, ink, textile, dyeing and other industries for color management. It measure L*a*b, L*c*h and the sample △E and △Lab value
Lamp start-run-up-time-and-flicker-test
To meet EU ErP requirements, IEC60969 Self-ballasted Lamps for General Lighting Services Performance requirements and Energy Star about Lamp Start, Run-up Time and Flicker Test.
High precision-rotation-luminaire-goniophotometer
This document provides information on Lisun Electronics Inc., including contact information for their global offices in Hong Kong, Shanghai, Los Angeles, and Hangzhou. It also summarizes the specifications and functions of Lisun's high precision rotation luminaire goniophotometers, including models LSG-1700B, LSG-1800B, and LSG-1800X. The goniophotometers are used to measure photometric parameters of luminaires like lighting distribution curves and luminaire efficiency.
High precision-rotation-luminaire-goniophotometer
LSG-1800B/LSG-1700B/LSG-1800X Goniophotometer is for luminous intensity distribution measurements with facility for turning the light source.
High precision-rotation-luminaire-goniospectroradiometer
Lisun Electronics provides high-precision goniospectroradiometers for measuring the photometric properties of lighting fixtures. Their models include the LSG-1800XCCD, LSG-1800BCCD, and LSG-1700BCCD. The document provides details on the system configuration, working principle, functions, specifications, laboratory requirements, software, and applications of Lisun's goniospectroradiometer systems.
High precision-rotation-luminaire-goniospectroradiometer
LSG-1800BCCD goniophotometer is high precision automatic goniophotometric instrument for luminous intensity distribution measurement with facility for rotating the light source.
LISUN Scientific grade-ccd-spectroradiometer-integrating-sphere-system-9500
LPCE-2 is an Integrating Sphere Spectroradiometer LED Testing System for identifying the performance of single LEDs and LED lamps. LED’s quality should be tested by checking its photometric, colorimetric and electrical parameters. According to CIE127-1997, IES LM-79-08 and IES LM-80-08, it recommends to using an array spectroradiometer with integrating sphere to test SSL products. The LPCE-2 system is applied with a CCD Spectroradiometer (LMS-9000B or LMS-9000A) and worked with A molding integrating sphere with testing holder base function which will be more circle and the test results will be more accurate than the traditional integrating sphere.
LISUN Spectral colorimeter
This document summarizes the features and specifications of several spectral colorimeter models produced by Lisun Electronics Inc. The colorimeters can measure color parameters such as L*a*b, L*c*h, and ΔE values. They utilize CLED light sources for illumination and feature an integrating sphere, automatic gloss compensation, and an SCS optical engine to provide accurate and repeatable measurements. The models vary in light sources supported, display capabilities, data storage, and inclusion of features like cameras and Bluetooth. All are portable, battery-powered devices suitable for applications in industries like plastics, paint, printing, food, textiles, and automotive.
Goniophotometers lsg-1600b
This document summarizes the test results of an LED street lamp from Lisun Group. It provides the photometric test report, intensity distribution diagrams, average and center illuminance values at various heights, zonal flux diagram and other test details like test date, system used, and manufacturer information. The lamp was tested to have a total flux of 10659 lm, efficiency of 49.3%, and average beam angle of 112.9 degrees.
Goniophotometers lsg-1600b
LSG-1600B Goniophotometer is for luminous intensity distribution measurements with facility for turning the light source.
EDX-2 Energy Dispersive X-ray Fluorescence Spectrometer
This document is a user manual for the Lisun Electronics Inc. Energy Dispersive X-ray Fluorescence Spectrometer (EDX-2). It provides contact information for Lisun Electronics Inc.'s global offices and describes the EDX-2 system specifications, installation process, and operating instructions. The EDX-2 is designed to meet RoHS testing requirements by accurately detecting and analyzing over 75 chemical elements, including the five restricted elements in the RoHS Directive, with testing times between 60-300 seconds.
Moving Detector Goniophotometer
Full meet LM-79 Clause 9.3.1, GB, CIE & IEC Standards. Test intensity distribution curve in 3D & export IES files for DiaLux. It can test all kinds of luminaires which length up to dia=0.6m and max 20kg
Moving detector-goniophotometer-lsg-3000
The document provides information on the Lisun Electronics Inc. LSG-3000 Moving Detector Goniophotometer system for measuring the spatial distribution of luminous intensity of luminaires. The system meets various industry standards and can test luminaires such as floodlights, street lights, and interior lights. It provides measurement of photometric properties such as luminous intensity, illuminance, luminance, beam angles, and luminous flux.
Moving detector-goniophotometer-lsg-3000
LSG-3000 Moving Detector Goniophotometer is full meet LM-79 Clause 9.3.1 request. The tested lamp will keep burning position and be fixed, near field detector move together with the big mirror in a line, and the far field detector will move with the big mirror synchronously. The detector will always sense the light directly from the luminaries.
High precision-spectroradiometer-integrating-sphere-system-9000b
The document provides contact and location information for Lisun Electronics Inc., a manufacturer of electrical test instruments. It lists various precision testing devices for properties like light spectrum, color, and electrical parameters. The instruments can test properties of LEDs, lamps, luminaires and other lighting products. It also provides order numbers, specifications and application information for products like spectroradiometers, integrating spheres, power supplies and more.
Xenon lamp-aging-test-chamber
This document provides information about the Xenon lamp aging test Chamber (XD-80LS) produced by Lisun Electronics Inc. It includes contact information for Lisun's global offices, a description of the chamber's components and capabilities, such as its ability to control temperature, humidity, and simulate sunlight. Specifications of the chamber such as its size, temperature and humidity ranges, and power requirements are also listed.
Water pressure-test-apparatus
Lisun Electronics Inc. is a leader in lighting and electrical test instruments with global offices in Hong Kong, Shanghai, Los Angeles, and Hangzhou. The document describes Lisun's Water Pressure Test Apparatus (WPD-A) which is used to pressure test water storage type water heaters in compliance with IEC60335/GB4706.12 standards. The WPD-A features a 900L water storage tank, temperature control from 5-85°C, pressure testing up to 2.5MPa controlled automatically via PLC and interface. It includes stainless steel and aluminum construction, power and control systems, flow and pressure sensors, and touch screen interface.
More Related Content
Similar to LISUN Test corners
Single angles gloss meter
It used in the surface gloss measurement for paint, plastic, metal, ceramics, building materials and so on. Our gloss meter conform to the DIN 67530, ISO 2813, ASTM D 523, JIS Z8741, BS 3900 Part D5, JJG696 standards
UV aging test Chamber
The chamber fully complies with the requirements of Standard GB/T16585-1996, GB14522-93, GB/T16422.3-97, ASTMG53 and etc., provides the best UV sunlight simulation, and is easy to use and operate.
Ccd spectroradiometer-integrating-sphere-compact-system-for-led-7000vis
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for photometric and colorimetric measurement of luminaries such as LEDs, LED luminaires, Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium lamps and high voltage mercury lamps) and CCFL. The measured data meets the requirements of CIE, EN and LM-79 clause 9.1 for the measurement of photometry and colorimetry.
Goniospectroradiometers lsg-1600bccd
LSG-1600BCCD Goniophotometric System carries out measuring methods of fixed location and rotating luminaires.
Goniospectroradiometers lsg-1600bccd
This document provides specifications for the Lisun Electronics Inc. Rotation Luminaire Goniophotometer (LSG-1600BCCD). Key details include:
- It measures photometric parameters of luminaires like intensity distribution curves and efficiency.
- Testing meets standards like CIE, IEC, IES. Angular accuracy is 0.2 degrees and photometry accuracy is Class A.
- The luminaire under test rotates ±180 degrees horizontally and ±180 degrees vertically. Intensity is measured from 0.001 to 10,000 lux.
Spectral Colorimeter
It is adopts the theory of spectrophotometer. It used for plastic, printing, paint, ink, textile, dyeing and other industries for color management. It measure L*a*b, L*c*h and the sample △E and △Lab value
Lamp start-run-up-time-and-flicker-test
To meet EU ErP requirements, IEC60969 Self-ballasted Lamps for General Lighting Services Performance requirements and Energy Star about Lamp Start, Run-up Time and Flicker Test.
High precision-rotation-luminaire-goniophotometer
This document provides information on Lisun Electronics Inc., including contact information for their global offices in Hong Kong, Shanghai, Los Angeles, and Hangzhou. It also summarizes the specifications and functions of Lisun's high precision rotation luminaire goniophotometers, including models LSG-1700B, LSG-1800B, and LSG-1800X. The goniophotometers are used to measure photometric parameters of luminaires like lighting distribution curves and luminaire efficiency.
High precision-rotation-luminaire-goniophotometer
LSG-1800B/LSG-1700B/LSG-1800X Goniophotometer is for luminous intensity distribution measurements with facility for turning the light source.
High precision-rotation-luminaire-goniospectroradiometer
Lisun Electronics provides high-precision goniospectroradiometers for measuring the photometric properties of lighting fixtures. Their models include the LSG-1800XCCD, LSG-1800BCCD, and LSG-1700BCCD. The document provides details on the system configuration, working principle, functions, specifications, laboratory requirements, software, and applications of Lisun's goniospectroradiometer systems.
High precision-rotation-luminaire-goniospectroradiometer
LSG-1800BCCD goniophotometer is high precision automatic goniophotometric instrument for luminous intensity distribution measurement with facility for rotating the light source.
LISUN Scientific grade-ccd-spectroradiometer-integrating-sphere-system-9500
LPCE-2 is an Integrating Sphere Spectroradiometer LED Testing System for identifying the performance of single LEDs and LED lamps. LED’s quality should be tested by checking its photometric, colorimetric and electrical parameters. According to CIE127-1997, IES LM-79-08 and IES LM-80-08, it recommends to using an array spectroradiometer with integrating sphere to test SSL products. The LPCE-2 system is applied with a CCD Spectroradiometer (LMS-9000B or LMS-9000A) and worked with A molding integrating sphere with testing holder base function which will be more circle and the test results will be more accurate than the traditional integrating sphere.
LISUN Spectral colorimeter
This document summarizes the features and specifications of several spectral colorimeter models produced by Lisun Electronics Inc. The colorimeters can measure color parameters such as L*a*b, L*c*h, and ΔE values. They utilize CLED light sources for illumination and feature an integrating sphere, automatic gloss compensation, and an SCS optical engine to provide accurate and repeatable measurements. The models vary in light sources supported, display capabilities, data storage, and inclusion of features like cameras and Bluetooth. All are portable, battery-powered devices suitable for applications in industries like plastics, paint, printing, food, textiles, and automotive.
Goniophotometers lsg-1600b
This document summarizes the test results of an LED street lamp from Lisun Group. It provides the photometric test report, intensity distribution diagrams, average and center illuminance values at various heights, zonal flux diagram and other test details like test date, system used, and manufacturer information. The lamp was tested to have a total flux of 10659 lm, efficiency of 49.3%, and average beam angle of 112.9 degrees.
Goniophotometers lsg-1600b
LSG-1600B Goniophotometer is for luminous intensity distribution measurements with facility for turning the light source.
EDX-2 Energy Dispersive X-ray Fluorescence Spectrometer
This document is a user manual for the Lisun Electronics Inc. Energy Dispersive X-ray Fluorescence Spectrometer (EDX-2). It provides contact information for Lisun Electronics Inc.'s global offices and describes the EDX-2 system specifications, installation process, and operating instructions. The EDX-2 is designed to meet RoHS testing requirements by accurately detecting and analyzing over 75 chemical elements, including the five restricted elements in the RoHS Directive, with testing times between 60-300 seconds.
Moving Detector Goniophotometer
Full meet LM-79 Clause 9.3.1, GB, CIE & IEC Standards. Test intensity distribution curve in 3D & export IES files for DiaLux. It can test all kinds of luminaires which length up to dia=0.6m and max 20kg
Moving detector-goniophotometer-lsg-3000
The document provides information on the Lisun Electronics Inc. LSG-3000 Moving Detector Goniophotometer system for measuring the spatial distribution of luminous intensity of luminaires. The system meets various industry standards and can test luminaires such as floodlights, street lights, and interior lights. It provides measurement of photometric properties such as luminous intensity, illuminance, luminance, beam angles, and luminous flux.
Moving detector-goniophotometer-lsg-3000
LSG-3000 Moving Detector Goniophotometer is full meet LM-79 Clause 9.3.1 request. The tested lamp will keep burning position and be fixed, near field detector move together with the big mirror in a line, and the far field detector will move with the big mirror synchronously. The detector will always sense the light directly from the luminaries.
High precision-spectroradiometer-integrating-sphere-system-9000b
The document provides contact and location information for Lisun Electronics Inc., a manufacturer of electrical test instruments. It lists various precision testing devices for properties like light spectrum, color, and electrical parameters. The instruments can test properties of LEDs, lamps, luminaires and other lighting products. It also provides order numbers, specifications and application information for products like spectroradiometers, integrating spheres, power supplies and more.
Similar to LISUN Test corners (20)
Ccd spectroradiometer-integrating-sphere-compact-system-for-led-7000vis
Ccd spectroradiometer-integrating-sphere-compact-system-for-led-7000vis
High precision-rotation-luminaire-goniospectroradiometer
High precision-rotation-luminaire-goniospectroradiometer
High precision-rotation-luminaire-goniospectroradiometer
High precision-rotation-luminaire-goniospectroradiometer
LISUN Scientific grade-ccd-spectroradiometer-integrating-sphere-system-9500
LISUN Scientific grade-ccd-spectroradiometer-integrating-sphere-system-9500
EDX-2 Energy Dispersive X-ray Fluorescence Spectrometer
EDX-2 Energy Dispersive X-ray Fluorescence Spectrometer
High precision-spectroradiometer-integrating-sphere-system-9000b
High precision-spectroradiometer-integrating-sphere-system-9000b
More from 世满 江
Xenon lamp-aging-test-chamber
This document provides information about the Xenon lamp aging test Chamber (XD-80LS) produced by Lisun Electronics Inc. It includes contact information for Lisun's global offices, a description of the chamber's components and capabilities, such as its ability to control temperature, humidity, and simulate sunlight. Specifications of the chamber such as its size, temperature and humidity ranges, and power requirements are also listed.
Water pressure-test-apparatus
Lisun Electronics Inc. is a leader in lighting and electrical test instruments with global offices in Hong Kong, Shanghai, Los Angeles, and Hangzhou. The document describes Lisun's Water Pressure Test Apparatus (WPD-A) which is used to pressure test water storage type water heaters in compliance with IEC60335/GB4706.12 standards. The WPD-A features a 900L water storage tank, temperature control from 5-85°C, pressure testing up to 2.5MPa controlled automatically via PLC and interface. It includes stainless steel and aluminum construction, power and control systems, flow and pressure sensors, and touch screen interface.
Uv aging-test-chamber
The document is a brochure for the UV-263LS UV aging test chamber manufactured by Lisun Electronics Inc. It describes the features and specifications of the chamber, which is designed to evaluate how materials hold up under simulated sunlight and other weather conditions. Key details include its internal dimensions, temperature and humidity ranges, UV lamp specifications, sample holder sizes, and automatic controls for temperature, lighting, condensation, and spraying cycles. Safety devices and features of the heating, humidity, and temperature control systems are also outlined.
Ul water-spray-test-device
The document is a brochure for the JL-UL UL Water Spray Test Device produced by Lisun Electronics Inc. It describes the device as testing electrical and electronic products under simulated rainy conditions according to UL standards. The device consists of three nozzles above and one nozzle below to test for UL rain and 45-degree sprinkler conditions. It provides specifications such as dimensions, adjustable height range, number of nozzles, flow rates, and pressure requirements.
Thermal resistance-spectroradiometer-system-for-led
This brochure describes the Thermal Resistance & Spectroradiometer System for LED (TRS-1000) from Lisun Electronics Inc. The TRS-1000 allows for integrated testing of optical, color, electrical, and thermal parameters of LEDs. It monitors parameters like junction temperature, thermal resistance, chromaticity, and luminous flux in real-time as temperature is varied from 5-90°C. The system configuration includes an LED spectroradiometer, thermal and electrical performance analyzer, temperature control device, standard light source, and integrating sphere.
Test corners
Lisun Electronics Inc. is a leader in lighting and electrical test instruments. The document provides information on test corners, which are used for temperature rise testing. It lists the technical specifications of the test corners including dimensions, thermocouple details, temperature measuring points, and materials. Basic configuration and installation/operation instructions are also included.
Spectrophotometer
Lisun Electronics produces a line of spectrophotometers under the HSCD series for measuring color. The brochure provides contact and location information for Lisun's global offices and factories. It also summarizes the key features and technical specifications of the HSCD spectrophotometer models, including their measurement capabilities, sensors, color indicators, repeatability, and optional accessories.
Spectral colorimeter
This document is a brochure for Lisun Electronics Inc. that describes their line of spectral colorimeters. It provides contact and location information for Lisun's global offices in Hong Kong, Shanghai, and Los Angeles. The brochure then describes the technical specifications and features of four models of spectral colorimeters - SCD-380, SCD-385, SCD-386, and SCD-388. It provides details on their illumination sources, sensors, measurement capabilities, data storage and display options, and other technical details.
Scientific grade-ccd-spectroradiometer-integrating-sphere-system-9500
Lisun Electronics provides a full suite of lighting test instruments including a scientific grade CCD spectroradiometer, integrating spheres, power supplies, and software. The document describes the company's spectroradiometer, optical fibers, power supplies, power meters, AC power sources, integrating spheres, standard lamp sources, and cabinet options for creating a complete LED testing system.
Rohs testing
Lisun Electronics Inc. is a leader in lighting and electrical test instruments with global offices in Hong Kong, Shanghai, Los Angeles, and Hangzhou. The document describes Lisun's Energy Dispersive X-ray Fluorescence Spectrometer (EDX-2) which can detect and analyze over 75 chemical elements and fully meet the RoHS testing requirements to restrict pollution from electronic waste. The 6-page brochure provides specifications, installation instructions, operating procedures, and an example test report for the EDX-2.
Portable ccd-spectroradiometer
This document is a brochure for Lisun Electronics Inc. that provides information about their portable CCD spectroradiometer product line. It lists contact information for their global offices in Hong Kong, Shanghai, and Los Angeles. It then describes the key features and specifications of their LMS-6000 series of devices that can measure parameters like illuminance, color temperature, chromaticity coordinates, and spectral distributions. It provides example interface screenshots and an example test report output.
Phosphor relative-brightness-tester 1
This document provides information about Lisun Electronics Inc., a leader in lighting and electrical test instruments. It includes contact information for Lisun Group's global offices in Hong Kong, Shanghai, Los Angeles, and Hangzhou. The second page describes the CHL-5LED Phosphor Relative Brightness Tester, which tests the phosphor relative brightness and forward voltage of LED light sources. It lists the tester's specifications, working principles, and provides a diagram of the testing process.
Oxygen bomb
Lisun Electronics Inc. is a leader in lighting and electrical test instruments with global offices in Hong Kong, Shanghai, Los Angeles, and Hangzhou. The brochure describes the Oxygen Bomb (YD-KD) aging tester, which tests wire, cable, rubber, and polymer materials under pressure and temperature conditions in oxygen or compressed air. The Oxygen Bomb has a maximum working pressure of 4.0MPa, safety blasting pressure of 2.7-3.3MPa, temperature range of 0-200°C, and tank volume of 4000cm3. It meets the testing requirements of IEC60335-1.
Optical radiation-safety-test-system
Lisun Electronics provides an optical radiation safety test system that measures the safety of lighting and electrical devices according to international standards. The system includes a spectroradiometer, retinal radiance meter, motorized goniometer, calibration sources, and software. It tests for hazards like UV exposure, blue light, and thermal radiation from 200-3000nm. The system identifies maximum exposures and classifies products' safety levels.
Near field-type-c-goniophotometer
This document provides information on Lisun Electronics Inc., including contact information for their global offices in Hong Kong, Shanghai, and Los Angeles. It also describes Lisun's Near Field Type C Goniophotometer (LSG-1900B) and provides specifications and test results for the device. The goniophotometer is used to measure the photometric parameters of luminaires, such as spatial intensity distribution curves.
Moving detector-goniospectroradiometer-lsg-3000ccd
The document is a brochure for Lisun Electronics Inc. that provides information about their LSG-3000CCD Moving Detector Goniospectroradiometer system. It includes specifications for the system such as measurement capabilities, accuracy standards, and laboratory requirements. It also lists contact information for Lisun Electronics' global offices and describes features of the system like measurement principles and data output formats.
Moving detector-goniospectroradiometer
Lisun Electronics provides lighting test instruments including a moving detector goniospectroradiometer (LSG-5000CCD) for measuring the spatial luminous intensity distribution and other photometric parameters of luminaires. The LSG-5000CCD system rotates a luminaire and detects light with two moving mirrors and a detector to directly measure light from the luminaire. It can test in accordance with various lighting standards and export data for use in lighting design software.
Moving detector-goniophotometer
Lisun Electronics provides a brochure describing their LSG-5000 Moving Detector Goniophotometer system for measuring the photometric properties of luminaires. The system includes a goniometric rotating console, photometer, software and various accessories. It is capable of measuring properties such as luminous intensity distribution, beam angles, efficiency and more in accordance with various international standards. The document provides details on system components, measurement principles, specifications, laboratory requirements and applications.
Lpce 2 lms-9000-buv_ uv-lamp-test-system
The brochure describes Lisun Electronics Inc., a leader in lighting and electrical test instruments, and their UV Lamp Test System which uses a high precision UV spectroradiometer, dark testing case, and other accessories to test the spectrum, radiant power, efficiency, color rendering index, correlated color temperature, and electric parameters of UV lamps. The system provides testing of UV lamps' spectral power distribution, radiant irradiance, peak wavelength, half bandwidth, UVA, UVB, and UVC output as well as the lamp's voltage, current, power, and power factor. An example test report is also included showing results for a sample
Led power-driver-tester
Lisun Electronics produces LED power driver test instruments including the WT2080. The WT2080 can measure input/output characteristics of LED drivers including voltage, current, power, power factor, harmonics, and startup characteristics. It tests according to industry standards and is used with other Lisun test equipment. The document provides details on the WT2080 specifications, functions, and an example test report showing results from testing an LED driver.
More from 世满 江 (20)
Thermal resistance-spectroradiometer-system-for-led
Thermal resistance-spectroradiometer-system-for-led
Scientific grade-ccd-spectroradiometer-integrating-sphere-system-9500
Scientific grade-ccd-spectroradiometer-integrating-sphere-system-9500
Moving detector-goniospectroradiometer-lsg-3000ccd
Moving detector-goniospectroradiometer-lsg-3000ccd
Recently uploaded
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
Astute Business Solutions | Oracle Cloud Partner |
Your goto partner for Oracle Cloud, PeopleSoft, E-Business Suite, and Ellucian Banner. We are a firm specialized in managed services and consulting.
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Azure API Management to expose backend services securely
How to use Azure API Management to expose backend service securely
Recently uploaded (20)
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Astute Business Solutions | Oracle Cloud Partner |
Astute Business Solutions | Oracle Cloud Partner |
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Azure API Management to expose backend services securely
Azure API Management to expose backend services securely
LISUN Test corners
- 1. Brochure Test corners (CSJ-A) Chapter 1 Summarize (大标题，居中小三加粗，尽量在新一页，用 Chapter 区分) 1. Operating instruction （一级标题，左对齐小四加粗） According to the requirements of CIE, IESNA and the National’s standard, this system is a multi-measurement mode spectrophotometer system which can realize B-β, A-α and C-γ etc through rotating lamps and lanterns. It test Spatial, light intensity distribution curves on any cross section (can be shown under the rectangular coordinate system or polar coordinate system), spatial iso-intensity curve. (正文，段首顶格左对齐 10 号，段落之间空行) Pocket Chroma Colorimeter CHROMA-2 Global Office of Lisun Electronics Inc. http://www.Lisungroup.com Lisun Group (Hong Kong) Limited Add: Room C, 15/F Hua Chiao Commercial Center, 678 Nathan Road, Mongkok, Kowloon, Hong Kong Tel: 00852-68852050 Fax: 00852-30785638 Email: SalesHK@Lisungroup.com Lisun Electronics (Shanghai) Co., Ltd Add: 113-114, No. 1 Building, Nanxiang Zhidi Industry Park, No. 1101, Huyi Road, Jiading District, Shanghai, 201802, China Tel: +86(21)5108 3341 Fax: +86(21)5108 3342 Email: SalesSH@Lisungroup.com Lisun Electronics Inc. (USA) Add: 445 S. Figueroa Street, Los Angeless, CA 90071, U.S.A. Email: Sales@Lisungroup.com Lisun China Factory Add: NO. 37, Xiangyuan Road, Hangzhou City, Zhejiang Province, China Tel: +86-189-1799-6096 Email: Engineering@Lisungroup.com Lead in CFL & LED Test Instruments Rev. 1/16/2019
- 2. Lisun Electronics Inc. Sales@Lisungroup.com www.Lisungroup.com -Page 1 - Test corners 1.Name of good: Test corners 2.Main application: Temperature rise test 3.Work condition: AC 220V～50Hz 4.Technical Parameters Test angle size: 800x800x1000mm Thermocouple: Thermocouple with a diameter less than 0.3mm Thermocouple arrangement: All drawn on a wire Copper for Temperature Testing: diameter 15mm, thickness 1mm(Brass plate) Temperature measuring point: 48 Test angle temperature measuring point: With 100*100mm covering Plywood: Thickness of about 20mm, the front is painted with no light black paint, and the back is pasted with gray film board. General requirements IEC60335-1 5.Basic configuration Test corners: 1 set Spare Brass plate 6.Installation connection After opening the box, connect the plug of thermocouple wire to the interface of temperature measuring. And connect the end of thermocouple wire with plug to the terminal of thermo-detector ’s rear cover. 7.Operation method Put the test sample on the test angle as required and on the power supply. Through the trunking, thermocouple leads the power to the terminal of
- 3. Lisun Electronics Inc. Sales@Lisungroup.com www.Lisungroup.com -Page 2 - thermo-detector ’s rear cover of the side. Measuring the temperature of each point of the current measurement surface