Lesson-1.docx
•Download as DOCX, PDF•
0 likes•4 views
This document provides an overview of common electrical tools and equipment. It describes screwdrivers that are used for different types of screw heads, such as standard, Phillips, and Allen screwdrivers. Hammers are introduced as tools used for driving and pulling nails, including claw hammers and mallets. Pliers are made of metal and insulated and are used for gripping, cutting, twisting wires. Specific pliers mentioned are combination, side cutting, and long nose pliers. Wire strippers and electrician's knives are used to remove insulation from wires. Portable electric drills and hacksaws are also briefly described.
Report
Share
Report
Share
Recommended
Electrical Tools.pptx
The document discusses common electrical tools used in electrical wiring installation including screwdrivers, hammers, pliers, wire strippers, knives, drills, and hacksaws. It describes the different types of screwdrivers such as standard, Philips, and Allen head screwdrivers. It also outlines various types of hammers, pliers including lineman's pliers, and wire strippers. The final section assigns students to bring specific electrical tools and materials to the next meeting including different pliers, screwdrivers, nails, wood, and wire.
Electrical tools and equipment
This document defines electrical terms and discusses tools and equipment used in electrical work. It defines terms like ampere, circuit, kilowatt, conductor, resistance, and types of conduits. It then describes common tools like screwdrivers, hammers, pliers, wire strippers, knives, drills and hacksaws used for tasks like installing wires and cables, cutting and stripping insulation, and making holes. The document provides details on different types of each tool, their purposes and functions in electrical work.
COMMON ELECTRICAL TOOLS IN ELECTRICAL INSTALLATION AND MAINTENANCE.pptx
This document identifies and describes common electrical tools used in electrical installation and maintenance. It lists 10 tools: screwdrivers (flat, Phillips, Allen, stubby), pliers (combination, side cutting, long nose), claw hammer, hacksaw, electrician's knife, electric drill, wire strippers (manual, automatic), pipe bender (hydraulic), pull-push rule, and angle grinder. For each tool, it provides details on the tool's use, function, and variations. The overall purpose is to explain the tools and equipment needed to perform electrical work.
Chs basic tools and equipment
The document discusses basic tools and equipment used for repair and troubleshooting. It defines tools and equipment, and classifies them into types such as driving tools, soldering tools, splicing tools, boring tools, cutting tools, and auxiliary tools. Specific tools are described within each type. The document also discusses proper care and maintenance of tools to avoid common faults, such as overtightening screws, using tools improperly, or failing to clean tools. A quiz is provided to test understanding.
EIM.pptx
This document defines terms and lists tools and materials needed for electrical work. It defines units like ampere and kilowatt, as well as components like conductors, resistors, and insulators. It also defines various types of conduits and connectors. The document then describes common hand tools for electricians like flathead and Phillips screwdrivers, hammers, pliers, and more. These basic tools are ergonomically designed for safety and comfort while performing repetitive tasks.
Mechanical Technology Grade 12 Chapter 4 Tools
This slide show accompanies the learner guide "Mechanical Technology Grade 10" by Charles Goodwin, Andre Lategan & Daniel Meyer, published by Future Managers Pty Ltd. For more information visit our website www.futuremanagers.net
Eim
This document provides information about various tools used in construction and electrical work. It describes screwdrivers which are used to tighten and loosen screws and come in different sizes and shapes. It also describes hammers which are used for driving and removing nails and come in materials like steel, wood, plastic or rubber. Pliers are also summarized as being made of metal and used for gripping, bending and cutting wires. Male plugs and switches are briefly explained as devices used to conduct electric current and control its flow, respectively.
Plumbers hand tools
The document discusses various hand tools used by plumbers. It describes pipe wrenches, hacksaw frames and blades, measuring tapes, soldering irons, tin snips, rasps/filers, caulking irons, adjustable wrenches, hammers, pipe cutters, drilling machines and bits, spanners, benches, rulers, try squares, vernier calipers, nuts, bolts, washers, and screws. The tools are used for tasks like cutting, gripping, fastening, measuring, and shaping materials in plumbing work.
Recommended
Electrical Tools.pptx
The document discusses common electrical tools used in electrical wiring installation including screwdrivers, hammers, pliers, wire strippers, knives, drills, and hacksaws. It describes the different types of screwdrivers such as standard, Philips, and Allen head screwdrivers. It also outlines various types of hammers, pliers including lineman's pliers, and wire strippers. The final section assigns students to bring specific electrical tools and materials to the next meeting including different pliers, screwdrivers, nails, wood, and wire.
Electrical tools and equipment
This document defines electrical terms and discusses tools and equipment used in electrical work. It defines terms like ampere, circuit, kilowatt, conductor, resistance, and types of conduits. It then describes common tools like screwdrivers, hammers, pliers, wire strippers, knives, drills and hacksaws used for tasks like installing wires and cables, cutting and stripping insulation, and making holes. The document provides details on different types of each tool, their purposes and functions in electrical work.
COMMON ELECTRICAL TOOLS IN ELECTRICAL INSTALLATION AND MAINTENANCE.pptx
This document identifies and describes common electrical tools used in electrical installation and maintenance. It lists 10 tools: screwdrivers (flat, Phillips, Allen, stubby), pliers (combination, side cutting, long nose), claw hammer, hacksaw, electrician's knife, electric drill, wire strippers (manual, automatic), pipe bender (hydraulic), pull-push rule, and angle grinder. For each tool, it provides details on the tool's use, function, and variations. The overall purpose is to explain the tools and equipment needed to perform electrical work.
Chs basic tools and equipment
The document discusses basic tools and equipment used for repair and troubleshooting. It defines tools and equipment, and classifies them into types such as driving tools, soldering tools, splicing tools, boring tools, cutting tools, and auxiliary tools. Specific tools are described within each type. The document also discusses proper care and maintenance of tools to avoid common faults, such as overtightening screws, using tools improperly, or failing to clean tools. A quiz is provided to test understanding.
EIM.pptx
This document defines terms and lists tools and materials needed for electrical work. It defines units like ampere and kilowatt, as well as components like conductors, resistors, and insulators. It also defines various types of conduits and connectors. The document then describes common hand tools for electricians like flathead and Phillips screwdrivers, hammers, pliers, and more. These basic tools are ergonomically designed for safety and comfort while performing repetitive tasks.
Mechanical Technology Grade 12 Chapter 4 Tools
This slide show accompanies the learner guide "Mechanical Technology Grade 10" by Charles Goodwin, Andre Lategan & Daniel Meyer, published by Future Managers Pty Ltd. For more information visit our website www.futuremanagers.net
Eim
This document provides information about various tools used in construction and electrical work. It describes screwdrivers which are used to tighten and loosen screws and come in different sizes and shapes. It also describes hammers which are used for driving and removing nails and come in materials like steel, wood, plastic or rubber. Pliers are also summarized as being made of metal and used for gripping, bending and cutting wires. Male plugs and switches are briefly explained as devices used to conduct electric current and control its flow, respectively.
Plumbers hand tools
The document discusses various hand tools used by plumbers. It describes pipe wrenches, hacksaw frames and blades, measuring tapes, soldering irons, tin snips, rasps/filers, caulking irons, adjustable wrenches, hammers, pipe cutters, drilling machines and bits, spanners, benches, rulers, try squares, vernier calipers, nuts, bolts, washers, and screws. The tools are used for tasks like cutting, gripping, fastening, measuring, and shaping materials in plumbing work.
Electrical tools and its function
The document discusses various electrical tools and their functions. It describes screwdrivers like standard, Philips, and stubby screwdrivers which are used to drive different types of screws. Pliers are also discussed, including combination pliers, side cutting pliers, and long nose pliers which are used for gripping, cutting, and holding wires. Additional tools mentioned are wire strippers, electrician's knives, portable electric drills, and hacksaws, each serving a specific purpose like stripping wire insulation or cutting metal materials. Proper tool use and safety are emphasized.
Fixed appliances and its components 3 /certified fixed orthodontic courses b...
Fixed appliances and its components 3 /certified fixed orthodontic courses b...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
00919248678078cutting instruments in operative dentistry by dr. jagadeesh kodityala
This document discusses dental instruments used for cutting tooth structure. It begins by defining dental instruments and describing the main types as hand instruments and rotary instruments. It then discusses the history and evolution of hand cutting instruments from early bulky chisels to modern steel instruments. Different types of alloys used for instruments and their properties are outlined. Cutting instruments are classified and various types are defined, including excavators, chisels, and specialized chisels. Details are provided on handles, blades, beveling, and proper sharpening techniques. The document covers rotary instruments and alternative cutting methods as well.
AG_1107_01_n.pdf
This document provides an overview of common workshop tools. It identifies and describes various hand tools including hammers, wrenches, pliers, chisels, saws, sandpaper, files and screwdrivers. It emphasizes the importance of using tools properly and keeping them well maintained. The document also discusses power tools, measuring instruments, fasteners like nuts and bolts, and drill bits. Proper tool selection and care are highlighted to perform tasks safely and effectively.
TLE : carpentry and masonry
The document discusses the parts of a tree trunk. It describes four main layers: the outer bark, which protects the tree; the cambium layer, which produces new cells and growth rings; the phloem or inner bark, which transports sap; and the xylem or sapwood, which transports water and nutrients up the tree. The xylem cells in the center eventually die to form the tree's heartwood. Overall, the document provides a concise overview of the key layers and tissues that make up a tree trunk and their functions.
Upload ortho instru
The document provides an overview of orthodontic instruments, including their materials, manufacturing processes, parts, features, classifications, and uses. Key orthodontic instrument categories discussed include diagnostic instruments, separator placement instruments, band forming instruments, bracket positioning instruments, ligature instruments, cutters, debonding instruments, wire bending/forming instruments, and measuring instruments. Maintenance and sterilization of instruments is also briefly covered.
1 a. Threaded fasteners and powers screws introduction
Fasteners like bolts, nuts, and screws are essential components that hold vehicles together. Bolts transmit axial forces and are made of different materials with varying strengths depending on the application. Power screws can transmit rotational motion into linear motion or produce large axial forces, and are designed to reduce stresses from these forces. Proper selection and installation of fasteners is important for safety and performance.
Findings
This document discusses different types of jewellery findings and their uses. Findings include components like bails, jump rings, earring posts, and settings that allow jewellery to function properly. Findings are categorized as functional, decorative, or hybrid. Specific findings and their dimensions are also outlined, such as standard earring post lengths and widths, jump ring sizes, and different styles of cuff links. Wire gauges and measurements are also defined to ensure proper sizing of components.
Prepare electrical supplies 2
This document defines electrical terms and lists supplies, materials, tools, and equipment used in electrical work. It describes common hand tools like screwdrivers, pliers, hammers, wire strippers, and drills. It also discusses electrical materials like switches, outlets, junction boxes, conduit, connectors, fuses, and circuit breakers. The document provides definitions and pictures to explain the purpose and use of various electrical tools, materials, and components.
Electrical-Tools-and-Equipment-LO1-Copy.pdf
The document identifies and describes common electrical tools needed for installing electrical wiring, including:
- Screwdrivers (standard, Philips, stubby, Allen), hammers (claw, mallet, ballpeen), and pliers (combination, side cutting, long nose) for fastening screws and nuts or holding/bending wires.
- Other tools are wire strippers for removing insulation from wires, electrician's knives for stripping high voltage cables, portable electric drills for making holes, and hacksaws for cutting metal conduit and armored cable.
- These tools enable electricians to systematically complete wiring installation tasks by hand that could not otherwise be accomplished without assistance.
Electrical tools
This document discusses tools and equipment used for electrical wiring installations. It provides details on screwdrivers, hammers, pliers, wire strippers, knives, drills, and hacksaws. For each tool, it describes the function and specific types including standard screwdrivers, Phillips screwdrivers, combination pliers, side cutting pliers, and more. The document explains how each tool is used for various electrical tasks like driving screws, cutting and holding wires, stripping insulation, drilling holes, and cutting metal conduit.
EPAS 10- LESSON 7 ELECTRONIC TOOLS .pptx
This document lists tools, materials, and equipment needed for electronic work and repair. It includes soldering irons, solder, desoldering tools, various pliers for cutting and gripping, wire strippers, screwdrivers, wrenches, knives, multimeters, ESD wrist straps, masks, brushes, aprons, cable ties, electrical tape, goggles, gloves, and soldering paste. Having the proper tools is essential for electronic maintenance and repair work.
Fasteners
Fasteners such as nails, screws, bolts and nuts are used to join materials together. The document discusses different types of fasteners and factors to consider when selecting a fastener, including strength, cost, installation requirements. It provides details on common fasteners like nails, wood screws, machine screws, bolts and nuts, and describes standards for dimensions, materials, and grades. Proper fastener selection depends on the application, loads involved, and materials being joined.
External fixator
External fixators are devices used to stabilize fractures located outside the body. They minimize metal inside tissues and allow for easy wound access. Pin fixators use cantilevered pins for stabilization while ring fixators form an exoskeleton around the limb for deformity correction. Proper pin placement and preloading are important for stability at the pin-bone interface. Dynamization through loosening of the fixator over time stimulates healing. External fixators are indicated for open fractures, bone defects, and limb lengthening and have advantages of being minimally invasive.
Hand tools and instruments
This document discusses various hand tools used in electrical work, including screwdrivers, nutdrivers, pliers, wire strippers, cutters, hammers, wrenches, punches, saws, drills, clamps, soldering equipment, and measuring instruments. It provides details on the purpose and proper use of each tool. Care and maintenance of tools is emphasized, such as cleaning tools after use, sharpening blades, not using tools improperly, and replacing damaged tools.
osca ortho.pptx
This document describes various orthodontic instruments and their uses. It provides information on gauges, pliers, cutters and other tools used for procedures like bonding brackets, placing wires, and removing bands. Key instruments mentioned include MBT gauges for measuring bracket height, bird beak pliers for curving wires, archwire tuckers for placing wires in brackets, and debonding pliers for removing brackets. The document provides visual aids and detailed descriptions of each tool's purpose in orthodontic treatment.
Orthodontics Removable appliances ch17
1. Removable appliances use tipping movements to move teeth since they apply a single point of contact to the tooth crown.
2. They can influence eruption of opposing teeth using flat bite planes or buccal capping.
3. Removable appliances are useful for applying extraoral traction to segments of teeth for intrusion and distal movement.
Ch 3 Hand Tools.ppt
This chapter discusses basic automotive hand tools. It describes common tools like wrenches, sockets, screwdrivers, pliers, hammers, chisels and punches. Safety rules and proper use and storage of tools is emphasized. A well-organized toolbox and keeping tools maintained is important. Knowing which tool is best for each job allows technicians to work efficiently.
ELECTRONIC-BASIC-HAND-TOOLS.pptx Elxtech
This document provides an overview of basic electronic hand tools categorized into driving tools, soldering tools, splicing tools, boring tools, cutting tools, and auxiliary tools. Driving tools include slotted, Phillips, and jewelers screwdrivers. Soldering tools discussed are soldering irons, soldering tool stands, and desoldering tools. Splicing tools covered are long nose pliers, side cutters, and wire strippers. Boring tools mentioned are 12V mini-drills, portable electric drills, and types of metal files like flat, half round, and round files. Cutting tools described are utility knives and hacksaws. Auxiliary tools discussed are magnifying glasses and paint
AE Hand Tools.pptx
This chapter discusses basic automotive hand tools. It describes common tools like wrenches, sockets, screwdrivers, pliers, hammers, chisels and punches. Safety rules and proper use and storage of tools is emphasized. A well-organized toolbox and keeping tools maintained is important. Knowing which tool is best for each job allows technicians to work efficiently.
JDVP - Video Presentation 2018 Deped Lucena.pptx
The document outlines the activities of the Joint Delivery Voucher Program partnership between Bellows College and other technical and vocational institutions. It documents visits made by Bellows College partners to Cotta National High School as well as training sessions held at technical schools in Sariaya and Lucena. It also lists the participants in a partnership visit made by Bellows College to BWEST College.
Presentation - EIM NCII Department of Education.pptx
The document discusses the Electrical Installation and Maintenance NC II training program offered at Cotta National High School. The training is based on the competency standards in the Training Regulation and aims to develop competencies for installing and maintaining electrical systems operating at or below 600 volts. The 196-hour program covers core competencies in roughing-in wiring, installing protective devices, and installing wiring devices. The training follows principles of competency-based training, with self-paced, modular learning based on work performance standards. Learners are assessed through demonstration of competencies in a work environment.
More Related Content
Similar to Lesson-1.docx
Electrical tools and its function
The document discusses various electrical tools and their functions. It describes screwdrivers like standard, Philips, and stubby screwdrivers which are used to drive different types of screws. Pliers are also discussed, including combination pliers, side cutting pliers, and long nose pliers which are used for gripping, cutting, and holding wires. Additional tools mentioned are wire strippers, electrician's knives, portable electric drills, and hacksaws, each serving a specific purpose like stripping wire insulation or cutting metal materials. Proper tool use and safety are emphasized.
Fixed appliances and its components 3 /certified fixed orthodontic courses b...
Fixed appliances and its components 3 /certified fixed orthodontic courses b...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
00919248678078cutting instruments in operative dentistry by dr. jagadeesh kodityala
This document discusses dental instruments used for cutting tooth structure. It begins by defining dental instruments and describing the main types as hand instruments and rotary instruments. It then discusses the history and evolution of hand cutting instruments from early bulky chisels to modern steel instruments. Different types of alloys used for instruments and their properties are outlined. Cutting instruments are classified and various types are defined, including excavators, chisels, and specialized chisels. Details are provided on handles, blades, beveling, and proper sharpening techniques. The document covers rotary instruments and alternative cutting methods as well.
AG_1107_01_n.pdf
This document provides an overview of common workshop tools. It identifies and describes various hand tools including hammers, wrenches, pliers, chisels, saws, sandpaper, files and screwdrivers. It emphasizes the importance of using tools properly and keeping them well maintained. The document also discusses power tools, measuring instruments, fasteners like nuts and bolts, and drill bits. Proper tool selection and care are highlighted to perform tasks safely and effectively.
TLE : carpentry and masonry
The document discusses the parts of a tree trunk. It describes four main layers: the outer bark, which protects the tree; the cambium layer, which produces new cells and growth rings; the phloem or inner bark, which transports sap; and the xylem or sapwood, which transports water and nutrients up the tree. The xylem cells in the center eventually die to form the tree's heartwood. Overall, the document provides a concise overview of the key layers and tissues that make up a tree trunk and their functions.
Upload ortho instru
The document provides an overview of orthodontic instruments, including their materials, manufacturing processes, parts, features, classifications, and uses. Key orthodontic instrument categories discussed include diagnostic instruments, separator placement instruments, band forming instruments, bracket positioning instruments, ligature instruments, cutters, debonding instruments, wire bending/forming instruments, and measuring instruments. Maintenance and sterilization of instruments is also briefly covered.
1 a. Threaded fasteners and powers screws introduction
Fasteners like bolts, nuts, and screws are essential components that hold vehicles together. Bolts transmit axial forces and are made of different materials with varying strengths depending on the application. Power screws can transmit rotational motion into linear motion or produce large axial forces, and are designed to reduce stresses from these forces. Proper selection and installation of fasteners is important for safety and performance.
Findings
This document discusses different types of jewellery findings and their uses. Findings include components like bails, jump rings, earring posts, and settings that allow jewellery to function properly. Findings are categorized as functional, decorative, or hybrid. Specific findings and their dimensions are also outlined, such as standard earring post lengths and widths, jump ring sizes, and different styles of cuff links. Wire gauges and measurements are also defined to ensure proper sizing of components.
Prepare electrical supplies 2
This document defines electrical terms and lists supplies, materials, tools, and equipment used in electrical work. It describes common hand tools like screwdrivers, pliers, hammers, wire strippers, and drills. It also discusses electrical materials like switches, outlets, junction boxes, conduit, connectors, fuses, and circuit breakers. The document provides definitions and pictures to explain the purpose and use of various electrical tools, materials, and components.
Electrical-Tools-and-Equipment-LO1-Copy.pdf
The document identifies and describes common electrical tools needed for installing electrical wiring, including:
- Screwdrivers (standard, Philips, stubby, Allen), hammers (claw, mallet, ballpeen), and pliers (combination, side cutting, long nose) for fastening screws and nuts or holding/bending wires.
- Other tools are wire strippers for removing insulation from wires, electrician's knives for stripping high voltage cables, portable electric drills for making holes, and hacksaws for cutting metal conduit and armored cable.
- These tools enable electricians to systematically complete wiring installation tasks by hand that could not otherwise be accomplished without assistance.
Electrical tools
This document discusses tools and equipment used for electrical wiring installations. It provides details on screwdrivers, hammers, pliers, wire strippers, knives, drills, and hacksaws. For each tool, it describes the function and specific types including standard screwdrivers, Phillips screwdrivers, combination pliers, side cutting pliers, and more. The document explains how each tool is used for various electrical tasks like driving screws, cutting and holding wires, stripping insulation, drilling holes, and cutting metal conduit.
EPAS 10- LESSON 7 ELECTRONIC TOOLS .pptx
This document lists tools, materials, and equipment needed for electronic work and repair. It includes soldering irons, solder, desoldering tools, various pliers for cutting and gripping, wire strippers, screwdrivers, wrenches, knives, multimeters, ESD wrist straps, masks, brushes, aprons, cable ties, electrical tape, goggles, gloves, and soldering paste. Having the proper tools is essential for electronic maintenance and repair work.
Fasteners
Fasteners such as nails, screws, bolts and nuts are used to join materials together. The document discusses different types of fasteners and factors to consider when selecting a fastener, including strength, cost, installation requirements. It provides details on common fasteners like nails, wood screws, machine screws, bolts and nuts, and describes standards for dimensions, materials, and grades. Proper fastener selection depends on the application, loads involved, and materials being joined.
External fixator
External fixators are devices used to stabilize fractures located outside the body. They minimize metal inside tissues and allow for easy wound access. Pin fixators use cantilevered pins for stabilization while ring fixators form an exoskeleton around the limb for deformity correction. Proper pin placement and preloading are important for stability at the pin-bone interface. Dynamization through loosening of the fixator over time stimulates healing. External fixators are indicated for open fractures, bone defects, and limb lengthening and have advantages of being minimally invasive.
Hand tools and instruments
This document discusses various hand tools used in electrical work, including screwdrivers, nutdrivers, pliers, wire strippers, cutters, hammers, wrenches, punches, saws, drills, clamps, soldering equipment, and measuring instruments. It provides details on the purpose and proper use of each tool. Care and maintenance of tools is emphasized, such as cleaning tools after use, sharpening blades, not using tools improperly, and replacing damaged tools.
osca ortho.pptx
This document describes various orthodontic instruments and their uses. It provides information on gauges, pliers, cutters and other tools used for procedures like bonding brackets, placing wires, and removing bands. Key instruments mentioned include MBT gauges for measuring bracket height, bird beak pliers for curving wires, archwire tuckers for placing wires in brackets, and debonding pliers for removing brackets. The document provides visual aids and detailed descriptions of each tool's purpose in orthodontic treatment.
Orthodontics Removable appliances ch17
1. Removable appliances use tipping movements to move teeth since they apply a single point of contact to the tooth crown.
2. They can influence eruption of opposing teeth using flat bite planes or buccal capping.
3. Removable appliances are useful for applying extraoral traction to segments of teeth for intrusion and distal movement.
Ch 3 Hand Tools.ppt
This chapter discusses basic automotive hand tools. It describes common tools like wrenches, sockets, screwdrivers, pliers, hammers, chisels and punches. Safety rules and proper use and storage of tools is emphasized. A well-organized toolbox and keeping tools maintained is important. Knowing which tool is best for each job allows technicians to work efficiently.
ELECTRONIC-BASIC-HAND-TOOLS.pptx Elxtech
This document provides an overview of basic electronic hand tools categorized into driving tools, soldering tools, splicing tools, boring tools, cutting tools, and auxiliary tools. Driving tools include slotted, Phillips, and jewelers screwdrivers. Soldering tools discussed are soldering irons, soldering tool stands, and desoldering tools. Splicing tools covered are long nose pliers, side cutters, and wire strippers. Boring tools mentioned are 12V mini-drills, portable electric drills, and types of metal files like flat, half round, and round files. Cutting tools described are utility knives and hacksaws. Auxiliary tools discussed are magnifying glasses and paint
AE Hand Tools.pptx
This chapter discusses basic automotive hand tools. It describes common tools like wrenches, sockets, screwdrivers, pliers, hammers, chisels and punches. Safety rules and proper use and storage of tools is emphasized. A well-organized toolbox and keeping tools maintained is important. Knowing which tool is best for each job allows technicians to work efficiently.
Similar to Lesson-1.docx (20)
Fixed appliances and its components 3 /certified fixed orthodontic courses b...
Fixed appliances and its components 3 /certified fixed orthodontic courses b...
cutting instruments in operative dentistry by dr. jagadeesh kodityala
cutting instruments in operative dentistry by dr. jagadeesh kodityala
1 a. Threaded fasteners and powers screws introduction
1 a. Threaded fasteners and powers screws introduction
More from franciscomacatugob1
JDVP - Video Presentation 2018 Deped Lucena.pptx
The document outlines the activities of the Joint Delivery Voucher Program partnership between Bellows College and other technical and vocational institutions. It documents visits made by Bellows College partners to Cotta National High School as well as training sessions held at technical schools in Sariaya and Lucena. It also lists the participants in a partnership visit made by Bellows College to BWEST College.
Presentation - EIM NCII Department of Education.pptx
The document discusses the Electrical Installation and Maintenance NC II training program offered at Cotta National High School. The training is based on the competency standards in the Training Regulation and aims to develop competencies for installing and maintaining electrical systems operating at or below 600 volts. The 196-hour program covers core competencies in roughing-in wiring, installing protective devices, and installing wiring devices. The training follows principles of competency-based training, with self-paced, modular learning based on work performance standards. Learners are assessed through demonstration of competencies in a work environment.
PPT - JDVP Program 2022-2023 of deped school.pptx
The document provides an overview of DepEd Order No. 006 s. 2023 which establishes the Joint Delivery Voucher Program for Senior High School Technical-Vocational-Livelihood (SHS-TVL) Specialization for School Year 2022-2023. It introduces the focal persons and coordinators for the program from the Division of Makati, including their positions and roles. It also provides an overview of the Technical Skills and Skills Training Learning Institution (TSSLI) including its training facilities and expectations for learners and parents.
presentationonelectriccircuit-181208074311.pptx
This presentation introduces electric circuits. It will cover the history of electric circuits dating back to 1800 when Alessandro Volta invented the first electric circuit. It will define what an electric circuit is, which is a system of conductors through which electric current can flow. The presentation will also go over common circuit symbols, the different types of circuits including series and parallel, provide examples of each, and how to calculate voltage and current in a circuit.
installing-electrical-protective-devices-for-distribution-power-lightning-pro...
Electrical protective devices like circuit breakers and fuses detect anomalies in power systems to prevent damage. Circuit breakers can be reset after tripping, while fuses must be replaced. Safety switches immediately cut power during dangerous electricity levels to prevent injury. Lightning protection systems like air terminals and conductors safely direct lightning strikes to ground. Proper installation and periodic testing of these devices ensures the continued safe operation of electrical systems.
DO 6, S. 2023_Guidelines on the Implementation of the JDVP TVL for SY 2022-20...
This document provides guidelines for the Joint Delivery Voucher Program for Senior High School Technical Vocational and Livelihood Specializations (JDVP-TVL) in the Philippines for School Year 2022-2023. Key points include:
1) The JDVP-TVL program allows public high school students in technical-vocational tracks to take specialized subjects at partner private schools, technical-vocational institutions, and non-DepEd public schools.
2) Eligible students are given vouchers worth PHP 12,550 each to cover tuition and training costs at partner institutions.
3) Interested private and non-public schools, as well as technical-vocational institutions, can apply to the Department of
Article III - Bill of Rights 1987.pptx
This document discusses the rights of people in Sections 1-11 and the rights of the accused in Sections 12-22. Specifically, Sections 12-22 cover rights of the accused, including implications from historical events during Martial Law as outlined in the 1987 Constitution.
EIM NCII ASSESSMENT ORIENTATION.pptx
This document outlines the procedures and requirements for an assessment to become a certified electrician under 300V for residential consumers. Candidates will demonstrate their skills through a written exam, actual installation demonstration, and oral questioning to show competency in core electrical installation and maintenance tasks. The assessment evaluates candidates on both technical skills as well as basic competencies like safety procedures and teamwork. To pass, candidates must demonstrate competency on all core skill areas. Results and feedback will be provided at the end, and qualified candidates can claim their certification after 3 days by submitting their assessment results.
517601780-Ipcrf-Development-Plan.docx
This document outlines an IPCRF development plan for a teacher with the following key elements:
1. It identifies strengths and development needs related to functional competencies in content knowledge and pedagogy, as well as core behavioral competencies like professionalism and innovation.
2. It proposes action plans, timelines, and resources needed to address development areas in teaching strategies, environmental protection, and resourcefulness.
3. Interventions like technical assistance from master teachers, learning action cell sessions, webinars and seminars are suggested to support the teacher's learning and growth.
Request Letter - For Steel Cabinet (Workshop).docx
A teacher is requesting to borrow an empty steel cabinet from the science laboratory to store electrical tools and equipment in the Electrical Installation & Maintenance workshop room on a temporary basis. The teacher assures the school principal that the cabinet will be properly maintained and returned immediately if needed by the science laboratory.
PESO.pptx
The document discusses a coaching program for senior high school students held by the Public Employment Service Office. It provides career guidance and advice to help students plan for their future after graduation. The document concludes with closing remarks for the event.
electricallayoutcot-190709180819.pptx
This document discusses electrical symbols, noting that they are small drawings used to represent electrical devices in circuit diagrams. It identifies three categories of symbols: schematic, architectural, and pictorial. The document emphasizes the importance of identifying electrical symbols in order to make an effective electrical layout plan.
State, Nation and Globalization.pptx
This document discusses the concepts of nation, state, and globalization. It defines a nation as a stable community formed based on common language, territory, culture, etc., whereas a state is a political organization comprised of a government, population, territory, and sovereignty. The document then presents different theories about how globalization influences nation-states. Hyperglobalists argue nation-states are weakening due to increased economic interdependence, while sceptics believe states remain powerful actors. Transformationalists take a middle view, arguing globalization reconstructs rather than ends nation-states through new international networks and restructured power dynamics.
thelegislativedepartment-100821114229-phpapp02.pdf
The Philippine Congress is the bicameral legislative branch of the Philippine government, consisting of the Senate and the House of Representatives. The Senate has 24 senators serving 6-year terms, while the House has 200 district representatives and 50 party-list representatives serving 3-year terms. Congress is responsible for creating and passing legislation, approving the national budget, ratifying treaties, and oversight of the executive branch. Bills must pass through both the Senate and House of Representatives in a multi-step process before being sent to the President for approval or veto.
Judical Branch ppt.ppt
The federal court system is a three-tiered pyramid with the Supreme Court at the top, appellate courts in the middle, and district courts at the bottom. The president nominates federal judges who must be confirmed by the Senate. Federal judges serve lifetime appointments. The Supreme Court is the highest court and hears appeals from lower courts, but appellate and district courts also have specific jurisdictions defined by the Constitution and Congress.
Social_Studies_-_The_Three_Branches_of_Government_-_Responsibilities_and_Auth...
The three branches of the US federal government are the legislative, executive, and judicial branches. The legislative branch is made up of the House of Representatives and Senate, which together form Congress and are responsible for creating laws. The executive branch, led by the President, is responsible for enforcing laws. The judicial branch, headed by the Supreme Court, interprets laws and the Constitution.
3 Branches explained PPT.ppt
The document outlines the three branches of the US government - the legislative, executive, and judicial branches. The legislative branch is Congress, made up of the Senate and House of Representatives, which makes laws. The executive branch is led by the President, who carries out and enforces laws. The judicial branch is the Supreme Court, the highest court in the country, which explains and settles disputes about laws.
Overview-of-JdVP-TVL-final.pptx
1) The document outlines guidelines for the Joint Delivery Voucher Program (JDVP) for senior high school students pursuing technical vocational livelihood specializations. The program allows public SHS students to take TVL specialization subjects at qualified technical vocational institutions using vouchers to cover tuition fees.
2) Around 74,922 Grade 12 students enrolled in the TVL track in public SHS schools will be eligible to participate. They will receive vouchers worth up to PHP 15,475 to cover tuition and expenses for up to 4 specializations at partner private or non-DepEd institutions.
3) The program will run from February 1 to March 27, 2018 to allow students to complete their specializations at partner
SHS-IMMERSION-BEST-PRACTICES-2018.docx
The documents summarize the work immersion activities of SHS Grade 12 EIM/SMAW students at Cotta National High School with three partner organizations - Technical Skills System of Lucena Inc., National Irrigation Administration, and Suay Electrical, Building and Grounds Maintenance Services. The students underwent orientation, examinations, and interviews before completing their ongoing work immersion, which is expected to finish in January-March 2019. The immersion provides important hands-on experience for students to develop skills and become competitive graduates.
4 & 5. Refinement of the Policy & Policy Management.pptx
Policies help run organizations by setting operational rules and guidance. Refinement is improving policies by making small changes, and policy management is the process of developing, maintaining, and updating policy documents. There are different types of policies in a hierarchy, from codes setting ethical principles to procedures with step-by-step instructions. The policy management process involves drafting new policies or updating existing ones, reviewing them with stakeholders, approving the final versions, issuing and implementing the policies, and maintaining them over time to ensure ongoing relevance and compliance.
More from franciscomacatugob1 (20)
Presentation - EIM NCII Department of Education.pptx
Presentation - EIM NCII Department of Education.pptx
installing-electrical-protective-devices-for-distribution-power-lightning-pro...
installing-electrical-protective-devices-for-distribution-power-lightning-pro...
DO 6, S. 2023_Guidelines on the Implementation of the JDVP TVL for SY 2022-20...
DO 6, S. 2023_Guidelines on the Implementation of the JDVP TVL for SY 2022-20...
Request Letter - For Steel Cabinet (Workshop).docx
Request Letter - For Steel Cabinet (Workshop).docx
thelegislativedepartment-100821114229-phpapp02.pdf
thelegislativedepartment-100821114229-phpapp02.pdf
Social_Studies_-_The_Three_Branches_of_Government_-_Responsibilities_and_Auth...
Social_Studies_-_The_Three_Branches_of_Government_-_Responsibilities_and_Auth...
4 & 5. Refinement of the Policy & Policy Management.pptx
4 & 5. Refinement of the Policy & Policy Management.pptx
Recently uploaded
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Librarians are leading the way in creating future-ready citizens – now we need to update our spaces to match. In this session, attendees will get inspiration for transforming their library spaces. You’ll learn how to survey students and patrons, create a focus group, and use design thinking to brainstorm ideas for your space. We’ll discuss budget friendly ways to change your space as well as how to find funding. No matter where you’re at, you’ll find ideas for reimagining your space in this session.
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience Wahiba Chair Training & Consulting
Wahiba Chair's Talk at the 2024 Learning Ideas Conference. Recently uploaded (20)
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience
Lesson-1.docx
- 1. Lesson 1 – ELECTRICAL TOOLS AND EQUIPMENT 1. Screw Drivers – are used to loosen or tighten screws with slotted heads. a) Standard/Flat Screw Driver - is used to drive screws with a negative (-) or single slot head.
- 2. b)Phillips Screw Driver - is used to drive screws with a positive (+) or cross slot head. c) Stubby Screw Driver - comes in either Standard or Phillips screw driver with short shank or blade and
- 3. a shorted handle used to turn screws in tight space. d)Allen Screw Driver / Wrench – it is used to drive screw with hexagonal slot head. 2. Hammers – are tools used in driving or pounding and pulling out
- 4. nails. They are made of hard steel, wood, plastic or rubber. a) Claw Hammer b)Mallet (Rubber Head) c) Ball Peen Hammer 3. Pliers – made from metal with insulators in the handle and are used
- 5. for cutting, twisting, bending, holding, and gripping wires and cables. a) Combination Pliers (Lineman’s Pliers) – used for gripping, holding, and cutting electrical wires and cables and even small nails.
- 6. b)Side Cutting Pliers – used for cutting fine, medium and big wires and cables. c) Long Nose Pliers – used to reach tight space or small opening and also used in making terminal loops of copper wires.
- 7. 4. Wire Stripper – used for removing insulation of medium-sized wires ranging from gauge #10 to gauge #16. 5. Electrician’s Knife – used by linemen to remove insulation of wire
- 8. and cables in low and high voltage transmission lines. 6. Portable Electric Drill – used in making holes on metal sheets and concrete walls. 7. Hacksaw – used to cut metal conduit and armored cable.