Electronic Tools and
Materials
In every electronic work, it is a must to
prepare first the necessary tools,
materials, and equipment needed as
well as the information. The following
list of tools, materials, and equipment
are needed in maintaining and
repairing.
Soldering Iron with stand
A soldering iron is a hand tool used in
soldering.
It supplies heat to melt solder so that it can
flow into the joint between two workpieces. A
soldering iron is composed of a heated metal
tip (the bit) and an insulated handle.
Soldering Lead
 is a metal alloy usually made
of tin and lead which is melted
using a Soldering iron.
Desoldering Tool
 A desoldering pump, or a solder
sucker, is a tool that sucks up the molten
solder through a vacuum. You can use
this tool to easily remove the solder,
especially in PCB boards.
Diagonal Cutting Pliers
 are pliers intended for the
cutting of wire (they are generally
not used to grab or turn anything).
Long Nose Pliers
 long-nose pliers, also known as needle-nose
pliers and snipe-nose pliers, are both cutting and
holding pliers used by artisans, jewelry designers,
electricians, network engineers and other
tradesmen to bend, re-position and snip wire.
Wire Stripper
 A wire stripper is
designed to remove the outer
jacket, or insulation, of a wire
 to maintain a firm
and safe grip while
turning and holding nuts
and bolts.
Adjustable Plier
 this has a cross tip
resembling a positive (+)
sign. This is used to turn
screws with cross slot heads.
Philip Screwdriver
 The blade is wedge –
shaped and resembles a
negative (-) sign. This is used
to drive screws with a single
slot head.
Flathead Screwdriver
 have a closed loop on one side (box-
end) for hexagonal or square nuts, while
the other end is an open U-shape (open-
end). These wrenches are often used for
nuts that are hard to loosen. The closed-
end can loosen the nut, while the open
end is then used to unscrew it fully.
Combination Wrench
 is any type of knife used
for general manual work
purposes. Such knives were
originally fixed-blade knives with
durable cutting edges suitable
for rough work
Utility Knife
 A multimeter (also known as a volt-ohm-
milliammeter, volt-ohmmeter or VOM) is
a measuring instrument that can
measure multiple electrical properties. A
typical multimeter can measure voltage,
resistance, and current, in which case
can be used as a voltmeter, ammeter,
Multitester/ Volt-OhmMilliammeter (VOM)
Antistatic wrist straps are
designed to prevent build-up of
static electricity and safely ground
operators who are working with ESD
sensitive components
ESD Wrist Strap
Surgical masks help protect your
nose and mouth from splattered
of body fluids, respirators filter
the air before you inhale it.
Goggles help protect only your
eyes from splatters.
Mask
This brush can remove dirt, webbings, and
many more unwanted entities on your
projects without a hitch. It has a curved
handle for better handling and firm bristles
that will surely leave your PCB shining
bright.
Non-Static Brush
a protective or decorative
garment worn over the front of
one's clothes and tied at the
back.
Apron
The use of cable ties is common
in automotive electrical
applications for bundling and
securing wiring, cable, wire
harness conductors, hoses, and
more.
Cable Tie
Electrical tape is a pressure-
sensitive tape used to insulate
materials that conduct electricity,
specifically electrical wires. It stops
the electrical current from
accidentally passing to other wires,
which could create a short or even
Electrical Tape
Goggles are the primary protectors
intended to shield the eyes against
liquid or chemical splash, irritating
mists, vapors, and fumes. They form
a protective seal around the eyes,
and prevent objects or liquids from
entering under or around the
Eye Protector/ Goggles
A glove is a garment covering
the hand, with separate sheaths
or openings for each finger
including the thumb.
Gloves
Solder paste is used in the
manufacture of printed circuit
boards to connect surface
mount components to pads
on the board.
Soldering Paste
EPAS 10- LESSON 7 ELECTRONIC TOOLS .pptx

EPAS 10- LESSON 7 ELECTRONIC TOOLS .pptx

  • 1.
  • 2.
    In every electronicwork, it is a must to prepare first the necessary tools, materials, and equipment needed as well as the information. The following list of tools, materials, and equipment are needed in maintaining and repairing.
  • 3.
    Soldering Iron withstand A soldering iron is a hand tool used in soldering. It supplies heat to melt solder so that it can flow into the joint between two workpieces. A soldering iron is composed of a heated metal tip (the bit) and an insulated handle.
  • 5.
    Soldering Lead  isa metal alloy usually made of tin and lead which is melted using a Soldering iron.
  • 7.
    Desoldering Tool  Adesoldering pump, or a solder sucker, is a tool that sucks up the molten solder through a vacuum. You can use this tool to easily remove the solder, especially in PCB boards.
  • 9.
    Diagonal Cutting Pliers are pliers intended for the cutting of wire (they are generally not used to grab or turn anything).
  • 11.
    Long Nose Pliers long-nose pliers, also known as needle-nose pliers and snipe-nose pliers, are both cutting and holding pliers used by artisans, jewelry designers, electricians, network engineers and other tradesmen to bend, re-position and snip wire.
  • 13.
    Wire Stripper  Awire stripper is designed to remove the outer jacket, or insulation, of a wire
  • 15.
     to maintaina firm and safe grip while turning and holding nuts and bolts. Adjustable Plier
  • 17.
     this hasa cross tip resembling a positive (+) sign. This is used to turn screws with cross slot heads. Philip Screwdriver
  • 19.
     The bladeis wedge – shaped and resembles a negative (-) sign. This is used to drive screws with a single slot head. Flathead Screwdriver
  • 21.
     have aclosed loop on one side (box- end) for hexagonal or square nuts, while the other end is an open U-shape (open- end). These wrenches are often used for nuts that are hard to loosen. The closed- end can loosen the nut, while the open end is then used to unscrew it fully. Combination Wrench
  • 23.
     is anytype of knife used for general manual work purposes. Such knives were originally fixed-blade knives with durable cutting edges suitable for rough work Utility Knife
  • 25.
     A multimeter(also known as a volt-ohm- milliammeter, volt-ohmmeter or VOM) is a measuring instrument that can measure multiple electrical properties. A typical multimeter can measure voltage, resistance, and current, in which case can be used as a voltmeter, ammeter, Multitester/ Volt-OhmMilliammeter (VOM)
  • 27.
    Antistatic wrist strapsare designed to prevent build-up of static electricity and safely ground operators who are working with ESD sensitive components ESD Wrist Strap
  • 29.
    Surgical masks helpprotect your nose and mouth from splattered of body fluids, respirators filter the air before you inhale it. Goggles help protect only your eyes from splatters. Mask
  • 31.
    This brush canremove dirt, webbings, and many more unwanted entities on your projects without a hitch. It has a curved handle for better handling and firm bristles that will surely leave your PCB shining bright. Non-Static Brush
  • 33.
    a protective ordecorative garment worn over the front of one's clothes and tied at the back. Apron
  • 35.
    The use ofcable ties is common in automotive electrical applications for bundling and securing wiring, cable, wire harness conductors, hoses, and more. Cable Tie
  • 37.
    Electrical tape isa pressure- sensitive tape used to insulate materials that conduct electricity, specifically electrical wires. It stops the electrical current from accidentally passing to other wires, which could create a short or even Electrical Tape
  • 39.
    Goggles are theprimary protectors intended to shield the eyes against liquid or chemical splash, irritating mists, vapors, and fumes. They form a protective seal around the eyes, and prevent objects or liquids from entering under or around the Eye Protector/ Goggles
  • 41.
    A glove isa garment covering the hand, with separate sheaths or openings for each finger including the thumb. Gloves
  • 43.
    Solder paste isused in the manufacture of printed circuit boards to connect surface mount components to pads on the board. Soldering Paste

Editor's Notes

  • #3 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #4 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #5 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #6 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #7 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #8 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #9 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #10 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #11 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #12 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #13 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #14 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #15 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #16 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #17 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #18 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #19 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #20 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #21 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #22 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #23 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #24 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #25 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #26 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #27 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #28 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #29 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #30 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #31 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #32 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #33 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #34 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #35 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #36 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #37 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #38 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #39 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #40 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #41 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #42 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #43 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #44 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.
  • #45 Some of the good qualities of an entrepreneur are opportunity seeker, risk taker, goal setter, excellent planner, a confident problem solver, hardworking, persistent, and a committed worker.