Leaf curl diseases chilli
•Download as PPTX, PDF•
0 likes•664 views
The document describes symptoms and control methods for Chilli Leaf Curl Virus. Symptoms include upward curling of leaf margins, reduced leaf size, yellowing veins, and stunted plants. Control methods are using resistant species, extracting seeds only from virus-free plants, controlling whitefly population with yellow sticky sheets, protecting seedlings from whiteflies with nets, monitoring fields and destroying infested plants, keeping fields weed-free, and plowing or burning debris after harvest.
Report
Share
Report
Share
Recommended
BROWN SPOT OF PADDY
Brown spot of paddy is caused by the fungus Bipolaris oryzae. It causes small reddish-brown spots on rice leaves, sheaths, and grains. The fungus spreads through infected seeds and can survive in collateral hosts. It thrives under warm, wet conditions between 25-30°C and 80-100% humidity. Management strategies include using disease-free seeds, resistant varieties, seed treatments, fungicide sprays, and avoiding excess nitrogen fertilization.
Chilli leaf curl virus
This is for study purpose and it helps to every agriculture students as well as farmers for there chilli cultivation.
Bacterial vilt
This slide will help in understanding the symptoms, effects of bacterial wilt on solencous crops like Potato, Brinjil and Pepper.I hope all of you will understand my points.
Brown spots of rice
Brown spot is a fungal disease that infects the coleoptile, leaves, leaf sheath, panicle branches, glumes, and spikelets. Its most observable damage are the numerous big spots on the leaves which can kill the whole leaf. When infection occurs in the seed, unfilled grains or spotted or discolored seeds are formed.
LEAF SPOT DISEASE IN GROUNDNUT
This document summarizes two fungal pathogens that cause early and late leaf spot disease in groundnuts: Mycosphaerella arachidis and Mycosphaerella berkeleyii. It describes their systematic position, symptoms, epidemiology, and management. Mycosphaerella arachidis causes early leaf spot, forming larger irregular lesions with yellow halos. Mycosphaerella berkeleyii causes late leaf spot, forming smaller circular lesions without halos. Both diseases require prolonged humidity for infection and development. Management includes cultural, chemical, and biological controls like crop rotation, fungicide application, and biocontrol agents.
Diseases of Bhindi
This document summarizes several diseases that affect okra/bhindi crops:
Fusarium wilt causes yellowing, stunting and wilting of plants. It is caused by the fungus Fusarium oxysporum f.sp. vasinfectum.
Cercospora leaf spot causes leaf spots and defoliation. It is caused by three Cercospora species which produce distinct symptoms.
Powdery mildew causes white, powdery patches on leaves which yellow and drop. It is caused by the fungus Erysiphe cichoracearum.
Yellow vein mosaic causes yellow veining and thickening of leaves. It is caused by the
Sugarcane diseases
Red rot of sugarcane is caused by the fungus Colletotrichum falcatum. It can cause complete loss of sugarcane production during severe epidemics. Symptoms include red patches on leaves and shriveled canes with red and white tissues. Favorable conditions include rain, irrigation, wind, and insect damage. Control measures include using disease-free canes, removing infected plants, rotations, and fungicide treatments.
Smut of sugarcane is caused by the fungus Ustilago scitaminea. Symptoms include the emergence of a "smut whip" and spindle leaves on infected plants. Control involves removing smutted plants, avoiding ratooning, using resistant
Disease of sorghum
The document describes 9 diseases that affect sorghum crops:
1. Anthracnose or Red leaf spot caused by Colletotrichum graminicola causes small red spots on leaves.
2. Rust caused by Puccinia purpurea causes small reddish brown flecks and pustules on leaves.
3. Ergot or Sugary disease caused by Claviceps sorghi leads to honeydew secretion and blackened heads.
4. Head Mould / Grain Mould / Head Blight caused by several fungi causes pink or black mold on infected grains.
5. Leaf Blight or Leaf Stripe caused by Exserohilum tur
Recommended
BROWN SPOT OF PADDY
Brown spot of paddy is caused by the fungus Bipolaris oryzae. It causes small reddish-brown spots on rice leaves, sheaths, and grains. The fungus spreads through infected seeds and can survive in collateral hosts. It thrives under warm, wet conditions between 25-30°C and 80-100% humidity. Management strategies include using disease-free seeds, resistant varieties, seed treatments, fungicide sprays, and avoiding excess nitrogen fertilization.
Chilli leaf curl virus
This is for study purpose and it helps to every agriculture students as well as farmers for there chilli cultivation.
Bacterial vilt
This slide will help in understanding the symptoms, effects of bacterial wilt on solencous crops like Potato, Brinjil and Pepper.I hope all of you will understand my points.
Brown spots of rice
Brown spot is a fungal disease that infects the coleoptile, leaves, leaf sheath, panicle branches, glumes, and spikelets. Its most observable damage are the numerous big spots on the leaves which can kill the whole leaf. When infection occurs in the seed, unfilled grains or spotted or discolored seeds are formed.
LEAF SPOT DISEASE IN GROUNDNUT
This document summarizes two fungal pathogens that cause early and late leaf spot disease in groundnuts: Mycosphaerella arachidis and Mycosphaerella berkeleyii. It describes their systematic position, symptoms, epidemiology, and management. Mycosphaerella arachidis causes early leaf spot, forming larger irregular lesions with yellow halos. Mycosphaerella berkeleyii causes late leaf spot, forming smaller circular lesions without halos. Both diseases require prolonged humidity for infection and development. Management includes cultural, chemical, and biological controls like crop rotation, fungicide application, and biocontrol agents.
Diseases of Bhindi
This document summarizes several diseases that affect okra/bhindi crops:
Fusarium wilt causes yellowing, stunting and wilting of plants. It is caused by the fungus Fusarium oxysporum f.sp. vasinfectum.
Cercospora leaf spot causes leaf spots and defoliation. It is caused by three Cercospora species which produce distinct symptoms.
Powdery mildew causes white, powdery patches on leaves which yellow and drop. It is caused by the fungus Erysiphe cichoracearum.
Yellow vein mosaic causes yellow veining and thickening of leaves. It is caused by the
Sugarcane diseases
Red rot of sugarcane is caused by the fungus Colletotrichum falcatum. It can cause complete loss of sugarcane production during severe epidemics. Symptoms include red patches on leaves and shriveled canes with red and white tissues. Favorable conditions include rain, irrigation, wind, and insect damage. Control measures include using disease-free canes, removing infected plants, rotations, and fungicide treatments.
Smut of sugarcane is caused by the fungus Ustilago scitaminea. Symptoms include the emergence of a "smut whip" and spindle leaves on infected plants. Control involves removing smutted plants, avoiding ratooning, using resistant
Disease of sorghum
The document describes 9 diseases that affect sorghum crops:
1. Anthracnose or Red leaf spot caused by Colletotrichum graminicola causes small red spots on leaves.
2. Rust caused by Puccinia purpurea causes small reddish brown flecks and pustules on leaves.
3. Ergot or Sugary disease caused by Claviceps sorghi leads to honeydew secretion and blackened heads.
4. Head Mould / Grain Mould / Head Blight caused by several fungi causes pink or black mold on infected grains.
5. Leaf Blight or Leaf Stripe caused by Exserohilum tur
Diseases of Potato
Potato crop Diseases, Symptoms, Etiology, Disease cycle and
Their Management.
1)Early blight
2)Late blight
3)Black scurf
4)Leaf roll
5)Mosaic
6)Mild mosaic/Interveinal mosaic
7)Severe mosaic
8)Rugose mosaic of potato
Sunflower diseases
This document summarizes several common diseases that affect sunflower plants, including the causal pathogens, symptoms, survival and spread mechanisms, and management strategies. It describes Alternaria blight caused by Alternaria helianthi, which causes leaf spots and is spread by wind-borne spores. It is managed through crop rotation, resistant varieties, and fungicide application. It also discusses rust caused by Puccinia helianthi that produces pustules on leaves and is spread by wind; charcoal rot caused by Macrophomina phaseolina that causes stem and root rot through soilborne inoculum; and head rot caused by Rhizopus nigricans that causes head rot through insect vectors. Management includes sanitation, resistant
Diseases of Cruciferous
This document discusses several diseases that affect cruciferous vegetables (cabbages, cauliflowers, radishes, mustards), including their symptoms, causative organisms, and management strategies. It covers club root caused by Plasmodiophora brassicae, downy mildew caused by Peronospora parasitica, Alternaria leaf spot caused by several Alternaria species, black rot caused by Xanthomonas campestris pv. campestris, white rust caused by Albugo candida, and cauliflower mosaic virus. Management involves practices like using disease-free seeds and transplants, crop rotation, removing plant debris, and applying appropriate fungicides or bactericides.
Damping-off |Symptoms, Causes, Control and Management
It's an overview about most prevalent plant disease attack on seedlings .the disease incidence is dependent more upon the conditions under which the seedlings are grown than upon the particular species of plant concerned.
Ergot of bajra or pearl millet
This document summarizes information about ergot of bajra or pearl millet, a disease caused by the fungus Claviceps fusiformis. It affects many countries including India, where it is found in states like Delhi, Uttar Pradesh, Rajasthan, and Maharashtra. The disease appears at the flowering stage, producing pink honey-like secretions on spikelets that later form hard, brown sclerotia where grains would be. These sclerotia contain harmful alkaloids and can cause losses of up to 70%. Management strategies include using healthy seed, seed treatment, early sowing, crop rotation, removing infected plants, and fungicide sprays. Resistant varieties include RHR-
Bacterial leaf blight of rice
bacterial leaf blight of rice
Xanthomonas oryzae pv. oryzae.
epidemiology, Symptoms and management.
2015021036 coconut bud rot
1. The causal organism of coconut bud rot is Phytophthora palmivora, an oomycete fungus. (2) Coconut bud rot was first reported in 1834 in the West Indies and has since been reported worldwide in coconut growing regions. (3) In India, coconut bud rot is widely prevalent along the east and west coasts, affecting states like Tamil Nadu.
Diseases of Brinjal
1) The document discusses several diseases that affect brinjal/eggplant crops including little leaf caused by phytoplasma, bacterial wilt caused by Ralstonia solanacearum, and Phomopsis fruit rot caused by Phomopsis vexans.
2) Little leaf results in small, stunted leaves and bushy growth while bacterial wilt causes sudden wilting and death. Phomopsis causes fruit rot and blight on leaves and stems.
3) Diseases spread through vectors like jassids for little leaf and are managed through resistant varieties, crop rotation, and fungicide/insecticide sprays.
Rice Blast
This document discusses rice blast, a fungal disease that causes significant losses in rice production worldwide. It provides details on the pathogen (Magnaporthe grisea), symptoms which include lesions on leaves and stems, and conditions favorable for the disease. Management strategies discussed include growing resistant varieties, cultural practices like removing alternate hosts, and chemical control with fungicides.
Yellow vein mosaic of bhindi
This document summarizes yellow vein mosaic disease of okra, caused by the bhindi mosaic virus 1 and hibiscus virus 1. The disease is transmitted by whiteflies and leafhoppers and affects leaves, causing vein clearing, chlorosis, and thickening. Symptoms include stunted and less productive plants with fewer, smaller, and deformed fruits. Management involves removing infected plants, controlling the insect vectors with insecticides, and growing resistant varieties.
Bacterial spot of pomegranate
Major disease in Pomegranate.
Caused by Xanthomonas campestris pv. punicae
Symptom- V or L shaped cracking on the fruits.
Red rust of tea, litchi and guava
This was presented by one of the group of students to our Asst. professors Mr. and Mrs. Poudel (Pathology) in 2017. By B.Sc.Ag Paklihawa IAAS campus, Full phase 6th batch
Late blight of potato
Late blight of potato is caused by the fungus Phytophthora infestans. It initially infects the lower leaves and can attack the plant at any time after foliage develops. The disease leads to water soaked spots on leaves that turn purple-brown and black, and white growth develops on the underside of leaves. It also causes purplish brown spots on tubers. Cool, humid conditions favor the spread of the disease. Control measures include using resistant varieties, avoiding bruising of tubers, and regularly spraying fungicides like mancozeb every 10-15 days during crop growth.
Karnal bunt of wheat
Karnal bunt of wheat is a fungal disease caused by Tilletia indica. It was first reported in India in 1931. Symptoms appear in the ear and include black powdery spores partially covering some grains, giving them a rotten fish smell. Spores can later burst and spread via air, soil, and seed. Disease management includes using disease-free seed, seed treatment, crop rotation, summer plowing, green manuring, avoiding irrigation at flowering, and spraying fungicides. Tolerant wheat varieties include PBW-154, PBW-533, HD-2227, C-306, and UP-368.
SHEATH BLIGHT,FALSE SMUT
This document summarizes information about two rice diseases: sheath blight and false smut. Sheath blight is caused by the fungus Rhizoctonia solani, which causes greenish-gray spots on leaves and empty grains. Management strategies include growing resistant varieties, proper spacing, and fungicide sprays. False smut is caused by the fungus Ustilaginoidea virens, which transforms rice grains into greenish spore balls. It is spread by airborne spores and favored by rainy weather at flowering and maturity. Disease management involves removing infected plant debris, using disease-free seeds, seed treatment, and fungicide sprays.
Citrus canker
Canker is an important disease of Citrus .The PPT discussed symptoms, pathogen and management methods of this disease.
Diseases of Black pepper
This document discusses several diseases that affect black pepper plants, including their symptoms, causal organisms, and conditions that favor disease development. It describes quick wilt disease, which affects the collar region and roots, causing wilting. Anthracnose causes leaf spots and stem infections. Slow decline is a fungal nematode complex resulting in foliar yellowing and vine death over years. Other diseases mentioned include stunt disease caused by Cucumber mosaic virus, phyllody disease from Phytoplasma, and basal rot from Sclerotium rolfsii. Management strategies include removing plant debris, intercropping with nematode antagonists, and applying biocontrol agents or fungicides.
Diseases of Guava
This document provides information on diseases that affect guava plants. It discusses the symptoms, characteristics, and management of major diseases like Fusarium wilt caused by the fungus Fusarium oxysporum f. sp. psidii. It also covers other diseases such as fruit canker caused by Pestalotiopsis psidii, stem canker from Physalospora psidii, anthracnose from Gloeosporium psidii, and red rust from Cephaleuros virescens. It details the identification and environmental conditions that promote each disease, as well as cultural, biological and chemical control methods.
Apple scab
Venturia inaequalis causes apple scab, a fungal disease affecting apple and crabapple trees. Symptoms include olive green spots on leaves that can spread and cause leaves to yellow and drop. Infected fruits develop scabby, brown lesions and cracks. The fungus overwinters in fallen leaves and fruit, releasing spores in spring that spread via rain and wind. Repeated infections can occur throughout the growing season. Management includes pruning trees, removing fallen leaves and fruits, applying fungicides starting at bud break, and planting resistant varieties.
Diseases of tea
It gives the information about symptoms, life cycle and management of diseases observed in the plantation crop Tea
Rules of word & sentence stress and intonation
The document provides information on word stress and intonation patterns in English. It discusses key points such as:
- Words can have primary and secondary stress; only vowels can be stressed
- Stressed syllables are longer, louder, and higher in pitch
- Sentences have rhythmic patterns of strong and weak beats
- Content words like nouns and verbs are usually stressed, while structure words are reduced
- Common stress rules are outlined for words of different syllable lengths and endings, including compound words
Terminology
A cash budget estimates cash inflows and outflows over a specific period like weekly, monthly, quarterly or annually to determine if a company has sufficient cash flow. Simple interest is calculated only on the principal amount of a loan or deposit, while compound interest is calculated on both the principal and accumulated interest over time. Amortization is the scheduled process of paying off a debt through regular installments that include both principal and interest.
More Related Content
What's hot
Diseases of Potato
Potato crop Diseases, Symptoms, Etiology, Disease cycle and
Their Management.
1)Early blight
2)Late blight
3)Black scurf
4)Leaf roll
5)Mosaic
6)Mild mosaic/Interveinal mosaic
7)Severe mosaic
8)Rugose mosaic of potato
Sunflower diseases
This document summarizes several common diseases that affect sunflower plants, including the causal pathogens, symptoms, survival and spread mechanisms, and management strategies. It describes Alternaria blight caused by Alternaria helianthi, which causes leaf spots and is spread by wind-borne spores. It is managed through crop rotation, resistant varieties, and fungicide application. It also discusses rust caused by Puccinia helianthi that produces pustules on leaves and is spread by wind; charcoal rot caused by Macrophomina phaseolina that causes stem and root rot through soilborne inoculum; and head rot caused by Rhizopus nigricans that causes head rot through insect vectors. Management includes sanitation, resistant
Diseases of Cruciferous
This document discusses several diseases that affect cruciferous vegetables (cabbages, cauliflowers, radishes, mustards), including their symptoms, causative organisms, and management strategies. It covers club root caused by Plasmodiophora brassicae, downy mildew caused by Peronospora parasitica, Alternaria leaf spot caused by several Alternaria species, black rot caused by Xanthomonas campestris pv. campestris, white rust caused by Albugo candida, and cauliflower mosaic virus. Management involves practices like using disease-free seeds and transplants, crop rotation, removing plant debris, and applying appropriate fungicides or bactericides.
Damping-off |Symptoms, Causes, Control and Management
It's an overview about most prevalent plant disease attack on seedlings .the disease incidence is dependent more upon the conditions under which the seedlings are grown than upon the particular species of plant concerned.
Ergot of bajra or pearl millet
This document summarizes information about ergot of bajra or pearl millet, a disease caused by the fungus Claviceps fusiformis. It affects many countries including India, where it is found in states like Delhi, Uttar Pradesh, Rajasthan, and Maharashtra. The disease appears at the flowering stage, producing pink honey-like secretions on spikelets that later form hard, brown sclerotia where grains would be. These sclerotia contain harmful alkaloids and can cause losses of up to 70%. Management strategies include using healthy seed, seed treatment, early sowing, crop rotation, removing infected plants, and fungicide sprays. Resistant varieties include RHR-
Bacterial leaf blight of rice
bacterial leaf blight of rice
Xanthomonas oryzae pv. oryzae.
epidemiology, Symptoms and management.
2015021036 coconut bud rot
1. The causal organism of coconut bud rot is Phytophthora palmivora, an oomycete fungus. (2) Coconut bud rot was first reported in 1834 in the West Indies and has since been reported worldwide in coconut growing regions. (3) In India, coconut bud rot is widely prevalent along the east and west coasts, affecting states like Tamil Nadu.
Diseases of Brinjal
1) The document discusses several diseases that affect brinjal/eggplant crops including little leaf caused by phytoplasma, bacterial wilt caused by Ralstonia solanacearum, and Phomopsis fruit rot caused by Phomopsis vexans.
2) Little leaf results in small, stunted leaves and bushy growth while bacterial wilt causes sudden wilting and death. Phomopsis causes fruit rot and blight on leaves and stems.
3) Diseases spread through vectors like jassids for little leaf and are managed through resistant varieties, crop rotation, and fungicide/insecticide sprays.
Rice Blast
This document discusses rice blast, a fungal disease that causes significant losses in rice production worldwide. It provides details on the pathogen (Magnaporthe grisea), symptoms which include lesions on leaves and stems, and conditions favorable for the disease. Management strategies discussed include growing resistant varieties, cultural practices like removing alternate hosts, and chemical control with fungicides.
Yellow vein mosaic of bhindi
This document summarizes yellow vein mosaic disease of okra, caused by the bhindi mosaic virus 1 and hibiscus virus 1. The disease is transmitted by whiteflies and leafhoppers and affects leaves, causing vein clearing, chlorosis, and thickening. Symptoms include stunted and less productive plants with fewer, smaller, and deformed fruits. Management involves removing infected plants, controlling the insect vectors with insecticides, and growing resistant varieties.
Bacterial spot of pomegranate
Major disease in Pomegranate.
Caused by Xanthomonas campestris pv. punicae
Symptom- V or L shaped cracking on the fruits.
Red rust of tea, litchi and guava
This was presented by one of the group of students to our Asst. professors Mr. and Mrs. Poudel (Pathology) in 2017. By B.Sc.Ag Paklihawa IAAS campus, Full phase 6th batch
Late blight of potato
Late blight of potato is caused by the fungus Phytophthora infestans. It initially infects the lower leaves and can attack the plant at any time after foliage develops. The disease leads to water soaked spots on leaves that turn purple-brown and black, and white growth develops on the underside of leaves. It also causes purplish brown spots on tubers. Cool, humid conditions favor the spread of the disease. Control measures include using resistant varieties, avoiding bruising of tubers, and regularly spraying fungicides like mancozeb every 10-15 days during crop growth.
Karnal bunt of wheat
Karnal bunt of wheat is a fungal disease caused by Tilletia indica. It was first reported in India in 1931. Symptoms appear in the ear and include black powdery spores partially covering some grains, giving them a rotten fish smell. Spores can later burst and spread via air, soil, and seed. Disease management includes using disease-free seed, seed treatment, crop rotation, summer plowing, green manuring, avoiding irrigation at flowering, and spraying fungicides. Tolerant wheat varieties include PBW-154, PBW-533, HD-2227, C-306, and UP-368.
SHEATH BLIGHT,FALSE SMUT
This document summarizes information about two rice diseases: sheath blight and false smut. Sheath blight is caused by the fungus Rhizoctonia solani, which causes greenish-gray spots on leaves and empty grains. Management strategies include growing resistant varieties, proper spacing, and fungicide sprays. False smut is caused by the fungus Ustilaginoidea virens, which transforms rice grains into greenish spore balls. It is spread by airborne spores and favored by rainy weather at flowering and maturity. Disease management involves removing infected plant debris, using disease-free seeds, seed treatment, and fungicide sprays.
Citrus canker
Canker is an important disease of Citrus .The PPT discussed symptoms, pathogen and management methods of this disease.
Diseases of Black pepper
This document discusses several diseases that affect black pepper plants, including their symptoms, causal organisms, and conditions that favor disease development. It describes quick wilt disease, which affects the collar region and roots, causing wilting. Anthracnose causes leaf spots and stem infections. Slow decline is a fungal nematode complex resulting in foliar yellowing and vine death over years. Other diseases mentioned include stunt disease caused by Cucumber mosaic virus, phyllody disease from Phytoplasma, and basal rot from Sclerotium rolfsii. Management strategies include removing plant debris, intercropping with nematode antagonists, and applying biocontrol agents or fungicides.
Diseases of Guava
This document provides information on diseases that affect guava plants. It discusses the symptoms, characteristics, and management of major diseases like Fusarium wilt caused by the fungus Fusarium oxysporum f. sp. psidii. It also covers other diseases such as fruit canker caused by Pestalotiopsis psidii, stem canker from Physalospora psidii, anthracnose from Gloeosporium psidii, and red rust from Cephaleuros virescens. It details the identification and environmental conditions that promote each disease, as well as cultural, biological and chemical control methods.
Apple scab
Venturia inaequalis causes apple scab, a fungal disease affecting apple and crabapple trees. Symptoms include olive green spots on leaves that can spread and cause leaves to yellow and drop. Infected fruits develop scabby, brown lesions and cracks. The fungus overwinters in fallen leaves and fruit, releasing spores in spring that spread via rain and wind. Repeated infections can occur throughout the growing season. Management includes pruning trees, removing fallen leaves and fruits, applying fungicides starting at bud break, and planting resistant varieties.
Diseases of tea
It gives the information about symptoms, life cycle and management of diseases observed in the plantation crop Tea
What's hot (20)
Damping-off |Symptoms, Causes, Control and Management
Damping-off |Symptoms, Causes, Control and Management
More from Md.Nazrul Islam
Rules of word & sentence stress and intonation
The document provides information on word stress and intonation patterns in English. It discusses key points such as:
- Words can have primary and secondary stress; only vowels can be stressed
- Stressed syllables are longer, louder, and higher in pitch
- Sentences have rhythmic patterns of strong and weak beats
- Content words like nouns and verbs are usually stressed, while structure words are reduced
- Common stress rules are outlined for words of different syllable lengths and endings, including compound words
Terminology
A cash budget estimates cash inflows and outflows over a specific period like weekly, monthly, quarterly or annually to determine if a company has sufficient cash flow. Simple interest is calculated only on the principal amount of a loan or deposit, while compound interest is calculated on both the principal and accumulated interest over time. Amortization is the scheduled process of paying off a debt through regular installments that include both principal and interest.
Terminology
This document defines several financial terms:
- A cash budget estimates cash inflows and outflows over a specific time period like weekly, monthly, or annually to determine if a company has enough cash.
- Simple interest is calculated only on the principal amount of a loan or savings and does not compound.
- Compound interest is calculated on both the principal and accumulated interest over previous periods at compounding intervals using the future value formula.
Valuation of Bond and Shares
The document discusses several assignments related to valuation of bonds and shares. It includes 10 illustrations providing examples and step-by-step solutions to problems involving calculating bond yields, present values of bonds, and share valuation using dividend growth models and required rates of return. The assignments were submitted by a student to professors at Fareast International University for a principles of finance course.
Studdy planner
This schedule outlines the daily classes for a student from 4:00-22:00 over a 3 week period. The student takes classes in Quran, Tajvid, Akaid & Fikah, Arabic, Bangla, English, Math, Science, Bangladesh & Bangladesh Politics, ICT, General Knowledge, PE & Health, and Agriculture Education. Quran classes are held daily from 4:00-7:00 at the local mosque. Other subjects include Paper I and II exams as well as core academic classes.
Pronounciation of regular verbs ending with 'ed'
This document provides rules for pronouncing the past tense form of regular verbs ending in "-ED". It explains that the "-ED" ending is pronounced as "/t/", "/d/", or "/id/" depending on whether the last sound before the "-ED" ending is voiceless, voiced, or a "/t/" or "/d/". It includes a table of example verbs and their pronunciations. The three main rules are that verbs ending in "K", "P", "S", "C", "SH", "CH", or with an "F" or "X" sound take a "/t/" pronunciation; verbs ending in "T" or "D" take an "/id/" pronunciation; and all other
Rules of syllablication
A syllable is a sequence of speech sounds organized into a single unit that acts as a building block of spoken words. There are three structural elements of a syllable: the nucleus which contains a vowel, the onset which contains consonant sounds before the nucleus, and the coda which contains consonant sounds after the nucleus. Syllables are categorized as open or closed depending on whether they contain just a nucleus or a nucleus plus a coda. The number of syllables in a word is determined by counting the number of vowel sounds or nuclei. There are specific rules for dividing words into syllables based on spelling patterns, consonant combinations, prefixes, suffixes, and other factors.
Assignment scm rmg factories_id-18203004
This document discusses the effectiveness of supply chain management in the Bangladesh readymade garments industry. It provides an overview of supply chain management and the factors that affect its effectiveness. The existing supply chain management in the Bangladesh garments sector is found to be unsatisfactory and facing challenges such as dependency on imported materials and long lead times. Recommendations are provided to improve supply chain management through better integration of partners, use of technology, training, and infrastructure development.
Assignment scm rmg factories_id-18203004
This document discusses the effectiveness of supply chain management in Bangladesh's readymade garments industry. It begins with an introduction to supply chain management and its importance for the garments industry. It then outlines the objectives, methodology, and key topics of discussion which include an overview of supply chain management and factors affecting its effectiveness. The discussion section provides details on Bangladesh's existing supply chain structure and challenges. It concludes that the country must improve supply chain management to remain competitive in the global garments market and meet export goals.
Assignment on Essentials of a Successful Trade Union
This document discusses factors that contribute to a successful trade union based on an assignment submitted by Krishibid Md. Nazrul Islam to their professor. It outlines 23 essential factors for a trade union to be effective, including having a solid foundation, unity among members, efficient leadership, a strong financial base, welfare programs for workers, independence from political interference, and education initiatives. The assignment analyzes these various socio-economic dimensions that determine whether a trade union can achieve its goals.
The Practice of `Just-in-Time' Production Model in Toyota Automobile Company ...
This document provides an overview of just-in-time (JIT) production as used by Toyota Automobile Company in Japan. It discusses the basic concepts of JIT, its history and development at Toyota, key principles such as reducing waste and inventory, and factors contributing to Toyota's success with JIT including an emphasis on continuous improvement, small batch sizes, and reliable suppliers. The document also notes some potential challenges with JIT implementation including high reliance on suppliers and lack of buffer for delays.
Project network math solution
Basic understanding of project network math solution and examples. Operations management. Master of Business Administration.
Presentation industrial relations nazrul_18203004
The document discusses industrial relations, which involves the relationship between management and workers in an industry. It defines industrial relations and outlines its key components, including dispute resolution, collective bargaining, and labor legislation. The objectives of good industrial relations are also presented, such as developing employer-employee trust and maintaining industrial peace. Some causes of poor industrial relations include unfair wages, unsafe working conditions, and a lack of communication skills. Finally, the document lists conditions that foster positive industrial relations, such as proper facilities, training opportunities, fair treatment of workers, and employee participation in decision-making.
More from Md.Nazrul Islam (14)
Assignment on Essentials of a Successful Trade Union
Assignment on Essentials of a Successful Trade Union
The Practice of `Just-in-Time' Production Model in Toyota Automobile Company ...
The Practice of `Just-in-Time' Production Model in Toyota Automobile Company ...
Recently uploaded
如何办理(uvic毕业证书)维多利亚大学毕业证本科学位证书原版一模一样
原版纸张【微信：741003700 】【(uvic毕业证书)维多利亚大学毕业证】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Authoring a personal GPT for your research and practice: How we created the Q...
Thematic analysis in qualitative research is a time-consuming and systematic task, typically done using teams. Team members must ground their activities on common understandings of the major concepts underlying the thematic analysis, and define criteria for its development. However, conceptual misunderstandings, equivocations, and lack of adherence to criteria are challenges to the quality and speed of this process. Given the distributed and uncertain nature of this process, we wondered if the tasks in thematic analysis could be supported by readily available artificial intelligence chatbots. Our early efforts point to potential benefits: not just saving time in the coding process but better adherence to criteria and grounding, by increasing triangulation between humans and artificial intelligence. This tutorial will provide a description and demonstration of the process we followed, as two academic researchers, to develop a custom ChatGPT to assist with qualitative coding in the thematic data analysis process of immersive learning accounts in a survey of the academic literature: QUAL-E Immersive Learning Thematic Analysis Helper. In the hands-on time, participants will try out QUAL-E and develop their ideas for their own qualitative coding ChatGPT. Participants that have the paid ChatGPT Plus subscription can create a draft of their assistants. The organizers will provide course materials and slide deck that participants will be able to utilize to continue development of their custom GPT. The paid subscription to ChatGPT Plus is not required to participate in this workshop, just for trying out personal GPTs during it.
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Current descriptions of immersive learning cases are often difficult or impossible to compare. This is due to a myriad of different options on what details to include, which aspects are relevant, and on the descriptive approaches employed. Also, these aspects often combine very specific details with more general guidelines or indicate intents and rationales without clarifying their implementation. In this paper we provide a method to describe immersive learning cases that is structured to enable comparisons, yet flexible enough to allow researchers and practitioners to decide which aspects to include. This method leverages a taxonomy that classifies educational aspects at three levels (uses, practices, and strategies) and then utilizes two frameworks, the Immersive Learning Brain and the Immersion Cube, to enable a structured description and interpretation of immersive learning cases. The method is then demonstrated on a published immersive learning case on training for wind turbine maintenance using virtual reality. Applying the method results in a structured artifact, the Immersive Learning Case Sheet, that tags the case with its proximal uses, practices, and strategies, and refines the free text case description to ensure that matching details are included. This contribution is thus a case description method in support of future comparative research of immersive learning cases. We then discuss how the resulting description and interpretation can be leveraged to change immersion learning cases, by enriching them (considering low-effort changes or additions) or innovating (exploring more challenging avenues of transformation). The method holds significant promise to support better-grounded research in immersive learning.
Micronuclei test.M.sc.zoology.fisheries.
Current Ms word generated power point presentation covers major details about the micronuclei test. It's significance and assays to conduct it. It is used to detect the micronuclei formation inside the cells of nearly every multicellular organism. It's formation takes place during chromosomal sepration at metaphase.
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptx
Although Artemia has been known to man for centuries, its use as a food for the culture of larval organisms apparently began only in the 1930s, when several investigators found that it made an excellent food for newly hatched fish larvae (Litvinenko et al., 2023). As aquaculture developed in the 1960s and ‘70s, the use of Artemia also became more widespread, due both to its convenience and to its nutritional value for larval organisms (Arenas-Pardo et al., 2024). The fact that Artemia dormant cysts can be stored for long periods in cans, and then used as an off-the-shelf food requiring only 24 h of incubation makes them the most convenient, least labor-intensive, live food available for aquaculture (Sorgeloos & Roubach, 2021). The nutritional value of Artemia, especially for marine organisms, is not constant, but varies both geographically and temporally. During the last decade, however, both the causes of Artemia nutritional variability and methods to improve poorquality Artemia have been identified (Loufi et al., 2024).
Brine shrimp (Artemia spp.) are used in marine aquaculture worldwide. Annually, more than 2,000 metric tons of dry cysts are used for cultivation of fish, crustacean, and shellfish larva. Brine shrimp are important to aquaculture because newly hatched brine shrimp nauplii (larvae) provide a food source for many fish fry (Mozanzadeh et al., 2021). Culture and harvesting of brine shrimp eggs represents another aspect of the aquaculture industry. Nauplii and metanauplii of Artemia, commonly known as brine shrimp, play a crucial role in aquaculture due to their nutritional value and suitability as live feed for many aquatic species, particularly in larval stages (Sorgeloos & Roubach, 2021).
3D Hybrid PIC simulation of the plasma expansion (ISSS-14)
3D Particle-In-Cell (PIC) algorithm,
Plasma expansion in the dipole magnetic field.
SAR of Medicinal Chemistry 1st by dk.pdf
In this presentation include the prototype drug SAR on thus or with their examples .
Syllabus of Second Year B. Pharmacy
2019 PATTERN.
bordetella pertussis.................................ppt
Bordettela is a gram negative cocobacilli spread by air born drop let
Shallowest Oil Discovery of Turkiye.pptx
The Petroleum System of the Çukurova Field - the Shallowest Oil Discovery of Türkiye, Adana
Thornton ESPP slides UK WW Network 4_6_24.pdf
ESPP presentation to EU Waste Water Network, 4th June 2024 “EU policies driving nutrient removal and recycling
and the revised UWWTD (Urban Waste Water Treatment Directive)”
Equivariant neural networks and representation theory
Or: Beyond linear.
Abstract: Equivariant neural networks are neural networks that incorporate symmetries. The nonlinear activation functions in these networks result in interesting nonlinear equivariant maps between simple representations, and motivate the key player of this talk: piecewise linear representation theory.
Disclaimer: No one is perfect, so please mind that there might be mistakes and typos.
dtubbenhauer@gmail.com
Corrected slides: dtubbenhauer.com/talks.html
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...Abdul Wali Khan University Mardan,kP,Pakistan
hematic appreciation test is a psychological assessment tool used to measure an individual's appreciation and understanding of specific themes or topics. This test helps to evaluate an individual's ability to connect different ideas and concepts within a given theme, as well as their overall comprehension and interpretation skills. The results of the test can provide valuable insights into an individual's cognitive abilities, creativity, and critical thinking skillsTravis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Travis Hills of Minnesota developed a method to convert waste into high-value dry fertilizer, significantly enriching soil quality. By providing farmers with a valuable resource derived from waste, Travis Hills helps enhance farm profitability while promoting environmental stewardship. Travis Hills' sustainable practices lead to cost savings and increased revenue for farmers by improving resource efficiency and reducing waste.
Bob Reedy - Nitrate in Texas Groundwater.pdf
Presented at June 6-7 Texas Alliance of Groundwater Districts Business Meeting
The debris of the ‘last major merger’ is dynamically young
The Milky Way’s (MW) inner stellar halo contains an [Fe/H]-rich component with highly eccentric orbits, often referred to as the
‘last major merger.’ Hypotheses for the origin of this component include Gaia-Sausage/Enceladus (GSE), where the progenitor
collided with the MW proto-disc 8–11 Gyr ago, and the Virgo Radial Merger (VRM), where the progenitor collided with the
MW disc within the last 3 Gyr. These two scenarios make different predictions about observable structure in local phase space,
because the morphology of debris depends on how long it has had to phase mix. The recently identified phase-space folds in Gaia
DR3 have positive caustic velocities, making them fundamentally different than the phase-mixed chevrons found in simulations
at late times. Roughly 20 per cent of the stars in the prograde local stellar halo are associated with the observed caustics. Based
on a simple phase-mixing model, the observed number of caustics are consistent with a merger that occurred 1–2 Gyr ago.
We also compare the observed phase-space distribution to FIRE-2 Latte simulations of GSE-like mergers, using a quantitative
measurement of phase mixing (2D causticality). The observed local phase-space distribution best matches the simulated data
1–2 Gyr after collision, and certainly not later than 3 Gyr. This is further evidence that the progenitor of the ‘last major merger’
did not collide with the MW proto-disc at early times, as is thought for the GSE, but instead collided with the MW disc within
the last few Gyr, consistent with the body of work surrounding the VRM.
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
Context. With a mass exceeding several 104 M⊙ and a rich and dense population of massive stars, supermassive young star clusters
represent the most massive star-forming environment that is dominated by the feedback from massive stars and gravitational interactions
among stars.
Aims. In this paper we present the Extended Westerlund 1 and 2 Open Clusters Survey (EWOCS) project, which aims to investigate
the influence of the starburst environment on the formation of stars and planets, and on the evolution of both low and high mass stars.
The primary targets of this project are Westerlund 1 and 2, the closest supermassive star clusters to the Sun.
Methods. The project is based primarily on recent observations conducted with the Chandra and JWST observatories. Specifically,
the Chandra survey of Westerlund 1 consists of 36 new ACIS-I observations, nearly co-pointed, for a total exposure time of 1 Msec.
Additionally, we included 8 archival Chandra/ACIS-S observations. This paper presents the resulting catalog of X-ray sources within
and around Westerlund 1. Sources were detected by combining various existing methods, and photon extraction and source validation
were carried out using the ACIS-Extract software.
Results. The EWOCS X-ray catalog comprises 5963 validated sources out of the 9420 initially provided to ACIS-Extract, reaching a
photon flux threshold of approximately 2 × 10−8 photons cm−2
s
−1
. The X-ray sources exhibit a highly concentrated spatial distribution,
with 1075 sources located within the central 1 arcmin. We have successfully detected X-ray emissions from 126 out of the 166 known
massive stars of the cluster, and we have collected over 71 000 photons from the magnetar CXO J164710.20-455217.
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless ReproducibilityUniversity of Rennes, INSA Rennes, Inria/IRISA, CNRS
The ability to recreate computational results with minimal effort and actionable metrics provides a solid foundation for scientific research and software development. When people can replicate an analysis at the touch of a button using open-source software, open data, and methods to assess and compare proposals, it significantly eases verification of results, engagement with a diverse range of contributors, and progress. However, we have yet to fully achieve this; there are still many sociotechnical frictions.
Inspired by David Donoho's vision, this talk aims to revisit the three crucial pillars of frictionless reproducibility (data sharing, code sharing, and competitive challenges) with the perspective of deep software variability.
Our observation is that multiple layers — hardware, operating systems, third-party libraries, software versions, input data, compile-time options, and parameters — are subject to variability that exacerbates frictions but is also essential for achieving robust, generalizable results and fostering innovation. I will first review the literature, providing evidence of how the complex variability interactions across these layers affect qualitative and quantitative software properties, thereby complicating the reproduction and replication of scientific studies in various fields.
I will then present some software engineering and AI techniques that can support the strategic exploration of variability spaces. These include the use of abstractions and models (e.g., feature models), sampling strategies (e.g., uniform, random), cost-effective measurements (e.g., incremental build of software configurations), and dimensionality reduction methods (e.g., transfer learning, feature selection, software debloating).
I will finally argue that deep variability is both the problem and solution of frictionless reproducibility, calling the software science community to develop new methods and tools to manage variability and foster reproducibility in software systems.
Exposé invité Journées Nationales du GDR GPL 2024
Recently uploaded (20)
Authoring a personal GPT for your research and practice: How we created the Q...
Authoring a personal GPT for your research and practice: How we created the Q...
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptx
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptx
3D Hybrid PIC simulation of the plasma expansion (ISSS-14)
3D Hybrid PIC simulation of the plasma expansion (ISSS-14)
bordetella pertussis.................................ppt
bordetella pertussis.................................ppt
Equivariant neural networks and representation theory
Equivariant neural networks and representation theory
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
aziz sancar nobel prize winner: from mardin to nobel
aziz sancar nobel prize winner: from mardin to nobel
The debris of the ‘last major merger’ is dynamically young
The debris of the ‘last major merger’ is dynamically young
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless Reproducibility
Basics of crystallography, crystal systems, classes and different forms
Basics of crystallography, crystal systems, classes and different forms
Leaf curl diseases chilli
- 1. Chilli Leaf Curl Virus Symptoms • Upward curling of leaf margins • Reduced leaf size • Older leaves become leathery and brittle • Yellowing of veins • Stunting of plants
- 2. Chilli Leaf Curl Virus Control • Use resistant species • Extract seeds only from virus-free plants • Control white-fly population • Use of sticky yellow sheets in your field to trap white-flies • protect seedlings from white flies by setting nylon nets over the nursery plants • Monitor field regularly. Collect and destroy early infested plants by burning • Ensure a weed-free field and surroundings • Plow deep or burn all plant debris after harvest • Encourage beneficial insects by growing mixed cropping