The document summarizes the piping engineering experience and qualifications of Karthik Bodducherla. It lists his key skills including pipe thickness calculations, knowledge of piping codes and standards, preparation of piping drawings and documents. It then details his work experience on various oil and gas projects from 2012 to present, where he performed tasks like piping design, review of 3D models, extracting isometrics. The document also lists the software, codes and languages he is proficient in. It concludes with his personal details and qualifications which include a B.E. in Mechanical Engineering.
Dear Sir/Madam,
I am Anas M. H, a Mechanical Engineer by qualification working in Cochin Shipyard Limited INDIA as Piping Engineer. I have more than 6 years of experience in Ship Building & Ship Repair.I had 3 months work Experience in DRYDOCKS WORLD DUBAI.Due to some health problems,I resigned from there..
I am looking forward to the next challenge that draws on my professional experience. Attached herewith is my resume for your kind reference. If my qualification and experience suits for any vacancy in your reputed organization, kindly arrange for a face to face or phone in interview.
Looking forward to hear from you soon in this regard.
Thanks & Best regards,
Anas M. H
Skype ID: anasmanganattu1@skype.com
INDIA:+919747265577,+919037066990
Dear Sir/Madam,
I am Anas M. H, a Mechanical Engineer by qualification working in Cochin Shipyard Limited INDIA as Piping Engineer. I have more than 6 years of experience in Ship Building & Ship Repair.I had 3 months work Experience in DRYDOCKS WORLD DUBAI.Due to some health problems,I resigned from there..
I am looking forward to the next challenge that draws on my professional experience. Attached herewith is my resume for your kind reference. If my qualification and experience suits for any vacancy in your reputed organization, kindly arrange for a face to face or phone in interview.
Looking forward to hear from you soon in this regard.
Thanks & Best regards,
Anas M. H
Skype ID: anasmanganattu1@skype.com
INDIA:+919747265577,+919037066990
I am working to recently Clean Fuels Project KNPC MAB1 (KUWAIT) project. With a back ground of total experience more than 10 years & involved in many complicated multidiscipline Gas Petrochemical Refinery and power Generation Plant, Experience in area of Supervision Quality Inspection, Broad Experience and good knowledge of execution Instrumentation. Installation / Pre-commissioning inspection for each phase of Instrumentation activities as per standard & project specification. Especially Instrument side. Having solid experience as a with the ability to follow the INSTRUMENT QA/QC ENGINEER he procedure ITP to include Site inspection, material equipment’s, instruments final inspection before pre-commissioning good supervision &coordinating with QC Engineer QC Manager within Company & Client.
I have good interpersonal and management skill, discipline, technical knowledge and self-confidence also good team player with excellent health. I thank you for your time& consideration, I can assure you that if given the opportunity, I shall discharge my duties to your satisfaction.
BACKGROUND INCLUDES
o Project Handling and execution
o Site activities Engineer in executing the project
o Technical support activities at site while project execution
o Site design changes as per IFC drawing
PROFESSIONAL SKILLS
o Quality Assurance / Quality Control
o A career span over 12 years experience in Aboard both.
o Strong Analytical, Training Skills and problem solving abilities. An Excellent ability
CV of Karan Vinayak - piping design engineerKaran Vinayak
I have experience in the field of Oil and Gas, Chemical Process Plant and Water Transmission Network Pipeline. (Piping Layout, Piping GAD, isometric, Bill of Materials, Pipeline Profile, Alignment Sheet, Co-Ordinate Drawing). I have software skills in Autocad, Autoplant, PDMS and CAESAR-II. Currently I am working in Sharjah on UG Water Pipeline Projects.
I am technically qualified for job positions like Piping/Pipeline Designer, Piping/Pipeline Engineer, Piping Quantity Estimator etc.
Hello,
I am interested for Sr. PDMS piping designer position. I am having total 15 years’ experience in oil gas projects.
Regards,
Pritam
+971-503631241
Abu Dhabi
Similar to Karthik Bodducherla Sundar (Piping Engineer) (20)
1. Overview
Key Skills:
Pipe Wall thickness calculation.
Knowledge of International Piping Codes and Standards.
Having Knowledge of Preparation and checking of PMS and VMS.
Preparation of RFQ’s.
Preparation & review of piping general arrangement drawings.
Review the plant 3D model for all design, accessibility, Maintainability, constructability using Naviswork
Manage software.
Pipe routing as per P&ID using PDMS.
Preparation & Checking of nozzle orientation drawing.
Checking support detail drawings.
Equipment modelling according to Equipment GA’s.
Knowledge of vessel and pipe fabrication and erection.
Preparation & Checking of Plot Plan & Equipment Layout.
Employment Summary
Nauvata Engineering Private Ltd
Bangalore, India
Piping Engineer
August 2012 – Present
GAS INJECTION PLATFORM
Abu Dhabi Marine Operating Company (Jan 2015-April 2015)
Preparation & Extraction of piping and support GAD using Draft
Review the plant 3D model for all design, accessibility, Maintainability, constructability using
Naviswork Manage software.
Pipe routing as per P&ID using PDMS.
Extracting of piping isometrics.
Prelude FLNG Project (On Deputation)
Dubai Dry Docks World, Dubai
Royal Dutch Shell PLC. (April 2014-August 2014)
Page | 1
BODDUCHERLA SUNDAR KARTHIK
PIPING ENGINEER
Karthik.bodducherla66@gmail.com
+91 9945263836
Work Domains
Oil & Gas
Refinery
Design Software
PDMS (Design/Draft/Isodraft)
AutoCAD
Navis Work Review (Auto Desk)
MS Office
Codes
ASME
ASTM
API
TEMA
Languages
English, Hindi, Telugu
Objective
“To be an active & excellent
employee in the
organization and to express
and develop my
professional skills for the
mutual benefit of the
company and myself”
2. Checking the Isometrics.
Comparing checked isometrics with the shop drawings to find out the discrepancies.
Marking up the corrections on shop drawings
Checking of MTO in isometric drawings against the MTO taken from shop drawings.
Commenting the discrepancies.
Preparation of Excel sheet for discrepancies found between MTO’s in the isometrics and MTO’s taken
from shop drawings.
Preparation of Final Report.
SAGAR LAXMI MODIFICATION PROJECT
Oil and Natural Gas Corporation , India
Pre-bid Engineering.
Pipe Wall thickness calculation.
Preparation of RFQ’s.
Preparation of Piping Design basis.
Reviewing of PMS and VMS.
B-127 CLUSTER PIPELINE PROJECT
Oil and Natural Gas Corporation , India
Technical Bid Evaluation.
Vendor Offer review
Checking of General Arrangement Drawings of valves.
Preparation of RFQ’s and Purchase Specification for Valves & Specialty Items.
Checking of Bulk MTO & Valve MTO.
B-193 PROCESS PLATFORM PROJECT
Oil and Natural Gas Corporation , India
Extraction of Isometrics.
Checking of isometrics Drawings as per P&ID.
Checking & Re-issuing the fabrication commented isometrics.
Extraction of MTO for newly added lines.
As built Drawings.
Pre-Bid projects
PIPELINE REPLACEMENT PROJECT-4
Kencana HL SDN BHD, Malaysia
BURNER BOOM FOR ECOVIX DRILL SHIPS
Sete Brasil
MUDLINE WELL COMPLETION SYSTEM
Oil and Natural Gas Corporation , India
MHNRD-III PIPELINE PROJECT
Oil and Natural Gas Corporation , India
Page | 2
3. Summary of Qualifications
Personal Information
Page | 3
2012 B.E. Mechanical (70.00 %)
Jawaharlal Nehru Technological University , Andhra Pradesh , India
2008
Intermediate (89 %)
Kurnool , Andhra Pradesh , India
2006 X (86.00 %)
Kurnool , Andhra Pradesh , India
Date of Birth
19th
May, 1991
Gender
Male
Marital Status
Single
Address
Bangalore, Karnataka
Passport
J8996691
Nationality
Indian