N Mathan Kumar has over 12 years of experience in piping design and engineering. He has worked on several power plant projects for companies like GE India, Alstom India, and BHEL. His responsibilities have included piping layout design, generating drawings, modeling piping systems, preparing material take-offs, and reviewing and checking vendor drawings and designs. He has strong knowledge of design software like PDMS and AutoCAD and international codes like ASME.

1. Page 1 of 4 Page 1 of 4
N MATHAN KUMAR Piping design Engineer
Mail id: mathan070782@gmail.com
Mail id: mathan999_nmk@yahoo.co.in
Skype id: mathankumar nambi
Summary
Around 12+ years of experience in the Piping engineering designing. Design,
drafting and checking experience that includes supervision, detailed piping design and
pipe supports.
Technical skills
 Detailed engineering for the generation of piping Layout
 Isometric and Detail Drawings as per ASME.
 Preparation of isometrics, nozzle orientation drawings.
 Preparation of Bom, Floor opening and insert plate
 Preparation of Support BOM & support drawing
 Preparation of stress analysis supports drawing
 Selection and preparation of spring hanger specifications
 Conversant with International Codes & Standards like ASME & IS
 Review of vendor drawings
 Preparation of Boiler external piping (BEP)
 Preparation of Balance of plant (BOP)
 Review and checking of piping layouts, isometrics etc.
 Ability to schedule deliverables within time-frame
Academic Profile
 Bachelor of Engineering (B.E)
2012-20015 62%
Karnataka University, Mysore,
(Part time).
 Diploma mechanical Engineering (DME)
1999-2002 70%
Mohamed Sathak Polytechnic College, Kilakarai, Ramanathapuram
Professional Experience
Organization : GE India Limited. April 2015 to till now
Designation : Piping Design Engineer
Project’s : Mamo TPS (1x700MW)

2. Page 2 of 4 Page 2 of 4
Responsibilities:
 Review/Checking and of Boiler external piping (BEP)
 Review/Checking Balance of plant (BOP)
 Review/Checking Supports as per Stress Report and Support Detail
Engineering.
 Checking for Piping Arrangement Drawings .
 Confirmation of piping issued documents (isometrics, plan and section,
detail support, MTO)
 Review/Checking of Isometric drawings, Pipe supports, Piping layout
drawings.
Organization : Alstom India Limited. Sep-2011 to Dec-2014
Designation : PDMS Piping Designer
Project’s : Bellary TPS (1x700MW)
: Gadarwara Super TPP (2x800MW)
: Mouda Super Thermal Power Project (2x660MW)
Responsibilities:
 Preparation of Boiler external piping (BEP)
 Preparation of Balance of plant (BOP)
 PDMS modeling for Warm keeping, Spray piping water piping system
 Modeling of Supports as per Stress Report and Support Detail Engineering.
 Preparation of Piping Arrangement Drawings using PDMS DRAFT.
 Material Take-off for Piping Bulk Items and Pipe Supports.
Organization : EPT engg services Pvt.Ltd April-2005 to SEP. 2011
Designation : Senior Piping Designer
Project : CUSMO Unit-I ( 2x300 MW)CFBC
Client : Foster wheeler North America Corporation
Duration : jan-2011 to sep 2011
Responsibilities:
 PDMS modeling for Equipment, External Piping System, Steam and Water Piping
System in PDMS.
 Preparation of Support Detail drawings.
 Preparation of Piping Arrangement Drawings using PDMS DRAFT.
 Project : Tartu chp 621 Unit-II ( 2x250 Mw)
 Client : Metso hybex boiler, tampere, finland
 Duration : Jan-2010 to Dec-201

3. Page 3 of 4 Page 3 of 4
Responsibilities:
 PDMS modeling for Equipment, External Piping System, Steam and Water Piping
System in PDMS.
 Preparation of Support Detail drawings.
 Preparation of Piping Arrangement Drawings using PDMS DRAFT.
 Checking of fabrication isometric drawings.
 Preparation of Piping & Support BOM.
Project : VCHEC Unit-II ( 2x335 MW)
Client : Foster wheeler North America Corporation
Duration : Jan-2009 to dec-2010
Project : VCHEC Unit-I ( 2x335 MW)
Client : Foster wheeler North America Corporation
Duration : Jan-2007 to dec-2008
Project : Tartu chp 621 Unit-I ( 2x250 Mw)
Client : Metso hybex boiler, tampere, finland
Duration : APR-2005 to DEC -2006
Responsibilities:
 PDMS modeling for Equipment, External Piping System, HP & LP Piping
System in PDMS.
 Preparation of Piping Arrangement Drawings using PDMS DRAFT.
 3D piping design and isometric checker
 Vendor data check (valves, vessels and pumps)
 Preparation of Piping & Support BOM.
 Preparation of Piping Bulk MTO.
Organization : BHEL March-2004 to March-2005
Designation : Junior assignment
Project’s : Birisingpur Thermal Power Station. (2x250MW)
: Santhldhi Thermal Power Station (4x120MW)
Responsibilities:
 Preparing Piping Layout & generating detail drawings.
 Preparation of Feed water, Main steam line, Cold Reheat, Hot Reheat, Drain and
Vent line piping as per P&ID & Piping Spec
 Preparation of supports as per Standards.

4. Page 4 of 4 Page 4 of 4
 Preparation of General Arrangement and Isometrics drawings.
Computer Proficiency
Operating Systems : Windows 8, Windows 7
Design Packages : PDMS 12.0 SP 7 VERSION
PDMS 12.0 SP 6.35 VERSION
CAESAR II 5.2, NAVISWORKS2016
AUTO CAD 201O & 2014
Personal Profile
Gender: Male Marital Status: Married
Date of Birth: July 07, 1982 Nationality : Indian
Father’s Name : Mr.N.Mathan Kumar
Permanent Address : 5-69, West Street, Manathi-kurukattur post
Tuticorin- 628623. Tamil Nadu. India
Present Address : 55F, Pocket A3 ,Second floor,
Mayor vihar phase-3, Newdelhi-110096
Languages Known : Tamil, English (To Read, Write & Speak) Hindi
Declaration
I hereby declare that all the statements made in this application are true to the
best of my knowledge and belief. In the event of any information being found false at
any stage, my candidature is liable to be rejected.
Yours truly,
(N.MATHAN KUMAR)