Shailesh Kumar Maurya is a senior engineer with over 9 years of experience in designing fired heaters and air preheaters. He currently works for Tecnicas Reunidas India Pvt Ltd in Bangalore. Previously he worked for Technip India Limited and Enereff Engineers Pvt. Ltd. where he was responsible for structural design, fabrication drawings, vendor coordination and project management activities related to fired heaters, air preheaters and associated equipment. He holds a B.Tech in Mechanical Engineering and an MBA in International Business.
8+ years of experience in the field of Mechanical and Piping Engineering Design. A variety of successful projects for industrial, Chemical, Oil&Gas, Power with ASME standards codes, PDMS, AUTOCAD, Detailed piping design, 3D modelling and Fabrication drawings.
8+ years of experience in the field of Mechanical and Piping Engineering Design. A variety of successful projects for industrial, Chemical, Oil&Gas, Power with ASME standards codes, PDMS, AUTOCAD, Detailed piping design, 3D modelling and Fabrication drawings.
Autocad, solidworks, creo and ansys portfolio for slideshareRahul Gupta
this is a mechanical design engineer portfolio presentation.
In this present includes autocad drawing, solidworks models, PTC creo models and ansys simulation and analysis. It have also 3d printing process and 3d print sample.
1. CURRICULUM VITAE
Corresponding Address
Name: Shailesh kumar maurya
Mo-PREM RAJ PUR, POST SADAR
Dist: JAUNPUR (U.P.) PIN-222001
CURRENT LOCATION-Noida
Contact no: 09873360898,
Email: Shaileshmaurya7@gmail.com
Objective: Intend to build a career with leading corporate of hitech environment with
committed and dedicated people, which will help me to explore myself fully and realize
my potential and willing to work as a key player in challenging and creative environment
Company Profile:
Tecnicas Reunidas is a technology driven, environment and safety
conscious EPC contractor serving Oil & Gas (Upstream & Downstream), fertilizers,
chemicals, power sector, infrastructure and connected market sectors on a global
basis.We are a wholly-owned TR group company located at Bangalore, Karnataka, India.
Experience:
Current Company- Tecnics Reunidas India Pvt Ltd. Bangalore
Total Working Experience: 9.5 years.
Designation - Senior Engineer, Fired Heaters.
Duration - From Nov2015 to Till date.
Project Details With Tecnicas Reunidas
Proposal for IOCL Haldia project
Previous Company-
1. Technip India Limited (Noida)
Designation - Principal Engineer.
Duration - From May 2012 to Oct 2015.
Project Details With Technip
VASHISTHA & S-1 DEVELOPMENT ODALAREVU, ANDHRA
PRADESH, ONGC
NSRP COMPLEX PROJECT NGHI SON REFINERY AND
PETROCHEMICAL LLC.
PROCESS REVAMP STUDY (PHASE-I) BATMAN REFINERY FIRED
EQUIPMENT REVAMP PROJECT FOR TURKISH
INTEGRATED REFINERY EXPANSION PROJECT (IREP), DHDT UNIT,
BPCL, KOCHI
Hyco, Kochi
2. HRD PROCESS PLATFORM,ONGC, MUMBAI
INTEGRATED REFINERY EXPANSION PROJECT, CDU/ VDU UNIT WITH
COMMON STACK, BPCL KOCHI
CDU/VDU LPG TREATING UNIT/ OFF GAS TREATING UNIT, BPCL
MUMBAI
PROPOSAL FOR SHELL HEATERS(P-4994)
PROPOSAL FOR MANGLORE CHEMICALS & FERTILIZERS
MCF (P-4986)
Key Responsibilities:
Project scheduling of engineering activities.
Preparation of M.T.O. of Pressure Parts, Steel and Refractory for Bid.
Calculation of Pressure Parts and Tube Support ( ITS , Tube Support Hangers)
Preparation of RFQ, TBE, preparation of API furnace mechanical data sheet,
Material requisition of Pressure Parts, High alloy castings,
Expansion Bellows, Dampers, Sight doors, Burners, APH etc
Checking of Fabrication Drawings of Heater and Air Pre Heater System,
Stacks and Duct support structures
Review of vendor Drawings (Burners, GAPH & CAPH, Expansion Joints,
Forced Draught & Induced Draught Fans, Soot Blower, SOB)
Structural Designing of Heater supporting structure, APH supporting
structures, Duct supporting structures, Stack using IS-6533 (Part-2)
Lifting and transportation analysis of the modules
To attend the project review meetings, Vendors meeting, Model review
meeting.
Resolve the site problems related to drawings and fabrication.
References and codes used: API 530, API 560, ASME SEC 2D, ASME B-16.5,
B-31.3,IS-800, IS-875(PART-III), IS-6533(PART I& II), IS-1893 (Part-4), EIL Standard,
Shell Standard.
2. Enereff engineers Pvt. Ltd. New Delhi
EEPL is a reputed name in the field of designing of heater and refinery and its related
fabrication drawings.
Designation- Mechanical Engineer.
Duration-from Sep 2007 to April 2012.
Project Details with Enereff:
HPCL & MITTAL ENEREGY LIMITED, BATHINDA PUNJAB
VDU, CDU, DHDT, CCR, NHT HEATERS & APH SYSTEM
INDIAN OIL CORPORATION LTD.
REACTER FEED HEATER (91-F-01), FRACTIONATUR HEATER (91-F-02),
COMMON APH SYSTEM.
NAPHTHA SUPER HEATER (92-F-01),
LARSEN& TOUBRO VALDEL (Off-Shore Project)
WASTE HEAT RECOVERY EXCHANGER & TURBINE GAS DUCT
3. NAGARJUNA OIL COPORATION LTD. CUDALORE, TAMILNADU
DESIEL HYDRODESULFURIZATION UNIT 140-H-001”
DELAYED COKER UNIT 130-H-101A/B”
INDIAN OIL COPORATION LTD. PARADIP REFINERY PROJECT,
PARADIP, ORISSA STATE, INDIA
VACUUM CHARGE HEATER” WITH APH SYSTEM
CRUDE CHARGE HEATER 010-F-101&201” WITH APH SYSTEM
VACUUM GAS OIL HYDROTREATER
REACTOR FEED HEATER 020-F-002” TOP MOUNTED APH SYSTEM
1st TRAIN REACTOR FEED HEATER 021-F-001” TOP MOUNTED APH
2nd TRAIN REACTOR FEED HEATER 021-F-002” TOP MOUNTED APH
NHT HEATER/APH SYSTEM & CCR HEATERS, IOCL PARADIP
CCR Charge Heater & INTERHEATER-1, 2&3, IOCL PARADIP ORISSA
Key Responsibilities:
Preparation and Planning of Drawing Index Sheet for the Projects
Preparation of Material requisition of Pressure Parts, High alloy castings, Expansion
Bellows, Dampers, Sight doors.
Preparing Foundation Loading Plan Drawings and calculating loads for piling for fired
heaters, APH systems, Stacks and duct supporting structures.
To preparing and Checking of General Arrangement Drawings of Heater, Air Pre
Heater System and Stack.
Working on Staad-Pro. ( Modeling, Calculating dead load & wind load),and design
the structures by staad pro-vs8i , Auto cad-2010(2D & 3D)
Design of Heater support structures, Stack support structures, Duct supporting
structures, APH supporting structures, by using Staad Pro and by applying Dead
Loads, Live Loads, Wind load, and Seismic Loads
Based on that Staad analysis, we prepares the Foundation Loading Plans
Calculation of Base Plate thickness, Bolt size based on the output file from Staad
Detailing of Fabrication Drawings of Heater and Air Pre Heater System, Stacks and
Duct support structures
Preparation of M.T.O. of Steel and Refractory for Bid
Review of vendor Drawings(Burners, GAPH & CAPH, Expansion Joints, Forced
Draught & Induced Draught Fans, Steam Drums, WHB)
Review of model and comment on the models.
Co-ordination with Drafting team and sub vendors / fabricators.
Planning and deciding of APH duct routing.
Dealing with EIL to Resolve the problems related to G.A & Fabrication Drawings.
Project scheduling of engineering activities.
Previous company- Milestones Switchgears Pvt. Ltd. Gurgaon.
Designation- Design engineer
Work Profile- Modeling of frame of switchgears panels, Bus ducts of panels on the
Pro-e Wildfire2 and auto cad 2006.
4. Duration- One Year (from Sep 2006 to Aug 2007)
Extra Technical Skills
Auto Cad 2006 from CIPET Lucknow
Pro-E wild fire2 (sketch mode, part modeling, surface modeling, sheet metal,
Molding, Assembly mode) from CIPET Lucknow.
Short term training program. , Designing of plastic products, molds and dies using
CAD software sponsored by small industries development bank of India (SIDBI)
organized at CIPET Lucknow from jan16 to jan 20, 2006.
Staad Pro- Modeling of structures, Applying loads (dead load, wind loads).Run the
program to Optimize the steel
Windows, Internet, MS office.
Educational Qualification:
A) Professional:
B.Tech (Mechanical Engineering) with First Division (67%) from AZAD INSTITUTE
OF ENGINEERING AND TECHNOLOGY LUCKNOW affiliated with UTTAR
PRADESH TECHNICAL UNIVERSITY LUCKNOW IN 2006.
MBA (INTERNATIONAL BUSINESS) with first division(64%) From MAHARISHI
DYAYNAND UNIVERSITY ROHTAK HARYANA(2010-11) .
B) Academic:
High School from U.P.Board in 1998 With 69%.
Intermediate from U.P.Board in 2000 With 63%.
Vocational Training: OBRA THERAL POWER PLANT. SONEBHADRA (U.P.)
For One Month (2003-2004).
Diesel locomotive Workshop, Charbagh Lucknow (U.P.)
For One Month (2004-2005).
Seminar: Given a successful seminar on Photovoltaic System.
Project: Analysis of dynamic parameter of FLAT PLATE by using FEM .
Role- Member
Duration- 2 months
Team Size- 5
Scope-The scope of the project is to analysis of dynamic parameters
Of a flat plate.
Personal Details:
Permanent Address: Mo-Prem raj pur, post- sadar, Jaunpur (U.P.) 222001
Father’s Name: Narendra kumar Maurya
Date of birth: 07/07/1983
Marital Status: Unmarried
Nationality: Indian
Languages Known: English & Hindi.
Hobbies: To Play cricket, Movies, Tours.
Declaration:
I hereby declare that the information given above is correct to the best of my
knowledge and belief.
Date: Signature