Nasir Mahmood has over 9 years of experience as a draughtsman in oil, gas, and petrochemical plant construction and maintenance. He has worked on projects in Abu Dhabi and Saudi Arabia, preparing piping, mechanical, and civil drawings according to client standards. His responsibilities have included developing isometric drawings, equipment layouts, and updating as-built drawings. Nasir is proficient in AutoCAD, AutoPlant, Spoolgen, and other CAD software and familiar with international piping codes and standards.
Nasir Mahmood has over 9 years of experience as a draughtsman in oil, gas, and petrochemical plant construction and maintenance. He has worked on projects in Abu Dhabi and Saudi Arabia, preparing piping and mechanical drawings and coordinating fabrication according to client standards. His responsibilities have included developing isometric drawings, preparing equipment layouts and site sketches, and updating as-built drawings. He is proficient in AutoCAD, Smart Plant Spoolgen, and piping design software and knowledgeable about international piping codes and standards.
This document provides a summary of the career and qualifications of R. Vijaya Kumar, a piping design engineer with over 13 years of experience in piping design, engineering, and project management for oil and gas projects. It outlines his responsibilities and software experience, and lists relevant projects with employers like Samsung Engineering, Fluor Arabia Limited, Bechtel, and Foster Wheeler in locations like India, the United States, and Saudi Arabia.
The document provides a curriculum vitae for Ramesh Digambarao Pawar, who has over 16 years of experience as a piping designer. He currently works for Amec Foster Wheeler India Private Limited as a senior piping designer using 3D modeling software on oil, gas, refinery and petrochemical projects. He has extensive experience in piping design, modeling, engineering and coordination across various roles and projects in his career.
Mangesh Sawant is a mechanical engineer with nearly 4 years of experience in areas like pressure vessel design, piping design, 3D modeling, project management, and quality assurance. He is proficient in CAD software like CATIA, Solid Edge, Pro-E, and AutoCAD. Currently working as a design engineer, he has experience in tasks such as piping layout, equipment modeling, fabrication drawings, and coordinating with clients. He has a B.E. in Mechanical Engineering from Pune University.
Manthrala Subba Rao is applying for a senior designer/mechanical engineer position. He has over 35 years of experience in designing and checking equipment like drums, columns, heat exchangers, and pressure vessels for refineries, petrochemical plants, and other process facilities. He is proficient in AutoCAD and pressure vessel codes and has worked on numerous international projects around the world.
This document is a curriculum vitae for Jai Prakash Sharma summarizing his professional experience and qualifications. He has over 14 years of experience as a SP3D and PDS piping designer working on projects for companies like Air Liquide India, Fluor India, Valdel Engineers & Constructors, and others. His responsibilities have included piping modeling, equipment modeling, isometric extraction, and working as both a designer and checker on projects in various industries like oil and gas, refineries, and petrochemical plants. He holds a Diploma in Mechanical Engineering and qualifications in AutoCAD, MicroStation, and other piping design software.
Nirmal Kumar is a piping engineer with over 6 years of experience in oil and gas refineries. He has extensive experience in piping design, cost estimation, site surveys, and project management. Nirmal holds a Bachelor's degree in Mechanical Engineering and is proficient in CADWorx Plant, PDMS, AutoCAD, and other piping design software. He currently works as a Design Engineer in Kuwait, where he is responsible for piping layouts, calculations, stress analysis, and project coordination.
Ashwin Mahale is a piping layout engineer with over 6 years of experience in oil and gas and water industries. He has extensive experience in piping design, 3D modeling, and developing piping layouts, plot plans, and equipment drawings. He is proficient in software such as Solidworks, AutoCAD, Microstation, and Plant Space DesignSeries. He held positions at various companies such as Enventure Technology Service, QuEST Global Engineering, and Unit force Technology, working on projects for clients in industries including hydrogen recovery, natural gas, water treatment, and oil/water separation.
Nasir Mahmood has over 9 years of experience as a draughtsman in oil, gas, and petrochemical plant construction and maintenance. He has worked on projects in Abu Dhabi and Saudi Arabia, preparing piping and mechanical drawings and coordinating fabrication according to client standards. His responsibilities have included developing isometric drawings, preparing equipment layouts and site sketches, and updating as-built drawings. He is proficient in AutoCAD, Smart Plant Spoolgen, and piping design software and knowledgeable about international piping codes and standards.
This document provides a summary of the career and qualifications of R. Vijaya Kumar, a piping design engineer with over 13 years of experience in piping design, engineering, and project management for oil and gas projects. It outlines his responsibilities and software experience, and lists relevant projects with employers like Samsung Engineering, Fluor Arabia Limited, Bechtel, and Foster Wheeler in locations like India, the United States, and Saudi Arabia.
The document provides a curriculum vitae for Ramesh Digambarao Pawar, who has over 16 years of experience as a piping designer. He currently works for Amec Foster Wheeler India Private Limited as a senior piping designer using 3D modeling software on oil, gas, refinery and petrochemical projects. He has extensive experience in piping design, modeling, engineering and coordination across various roles and projects in his career.
Mangesh Sawant is a mechanical engineer with nearly 4 years of experience in areas like pressure vessel design, piping design, 3D modeling, project management, and quality assurance. He is proficient in CAD software like CATIA, Solid Edge, Pro-E, and AutoCAD. Currently working as a design engineer, he has experience in tasks such as piping layout, equipment modeling, fabrication drawings, and coordinating with clients. He has a B.E. in Mechanical Engineering from Pune University.
Manthrala Subba Rao is applying for a senior designer/mechanical engineer position. He has over 35 years of experience in designing and checking equipment like drums, columns, heat exchangers, and pressure vessels for refineries, petrochemical plants, and other process facilities. He is proficient in AutoCAD and pressure vessel codes and has worked on numerous international projects around the world.
This document is a curriculum vitae for Jai Prakash Sharma summarizing his professional experience and qualifications. He has over 14 years of experience as a SP3D and PDS piping designer working on projects for companies like Air Liquide India, Fluor India, Valdel Engineers & Constructors, and others. His responsibilities have included piping modeling, equipment modeling, isometric extraction, and working as both a designer and checker on projects in various industries like oil and gas, refineries, and petrochemical plants. He holds a Diploma in Mechanical Engineering and qualifications in AutoCAD, MicroStation, and other piping design software.
Nirmal Kumar is a piping engineer with over 6 years of experience in oil and gas refineries. He has extensive experience in piping design, cost estimation, site surveys, and project management. Nirmal holds a Bachelor's degree in Mechanical Engineering and is proficient in CADWorx Plant, PDMS, AutoCAD, and other piping design software. He currently works as a Design Engineer in Kuwait, where he is responsible for piping layouts, calculations, stress analysis, and project coordination.
Ashwin Mahale is a piping layout engineer with over 6 years of experience in oil and gas and water industries. He has extensive experience in piping design, 3D modeling, and developing piping layouts, plot plans, and equipment drawings. He is proficient in software such as Solidworks, AutoCAD, Microstation, and Plant Space DesignSeries. He held positions at various companies such as Enventure Technology Service, QuEST Global Engineering, and Unit force Technology, working on projects for clients in industries including hydrogen recovery, natural gas, water treatment, and oil/water separation.
Resume - Wan Sazali, PDMS Piping DesignerWan Sazali
W. Mohd Sazali bin W. Muda is a Malaysian piping designer with 8 years of experience in engineering design, fabrication, and as-built drawing projects for both offshore and onshore facilities. He is proficient in piping modeling software like PDMS and AutoCAD, and has worked on projects in Malaysia, Qatar, and Turkmenistan for companies including PETRONAS, Shell, and Hess. His current role is as a PDMS piping designer for ARMADA TPCE in Kuala Lumpur.
Chandramohan P has over 18 years of experience in pipeline and piping design. He has worked on numerous oil and gas projects in India, the Middle East, and Iraq. Some of his responsibilities include preparing pipeline alignments, crossings, layouts, and isometric drawings; developing engineering data; and assisting the drafting team. He is proficient in AutoCAD, Microstation, and other software.
This document summarizes the career experience of Nazrul Mazdi Mokhtar as a piping designer with over 20 years of experience. He has worked on various oil, gas and petrochemical projects for companies like Foster Wheeler, Technip, Shell and BP. His responsibilities have included piping modeling, layout design, producing drawings, coordinating with other disciplines, and supporting construction and commissioning activities. He is proficient in several piping software programs and has extensive experience in designing systems for refineries, gas plants, power plants and other process facilities.
Pankaj Souriya is a design engineer from India with over 10 years of experience in piping, construction, and manufacturing. He has expertise in oil and gas pipeline design as well as 3D modeling software like AutoCAD, SolidWorks, and CATIA. Some of his responsibilities have included preparing drawings, calculations, reports, and specifications for projects in industries like oil and gas. He is seeking a challenging engineering position that offers career growth.
A Gomez Resume Pipe Designer_Checker_plainAmerico Gomez
This document provides a summary of Americo Gomez's experience as a senior piping designer with over 23 years of experience in the oil and gas industry. He has extensive experience designing piping systems for grassroots and expansion projects using various 3D modeling software. He has also participated in field visits and provided design review and coordination support. Some of his project experience includes work for Suncor Energy, Imperial Oil, Saudi Aramco, and TransAlta.
This document is a resume for Padmanabh M. Dhobale, a piping design engineer with over 11 years of experience working on projects in countries like the UAE, India, Egypt, Singapore, and Saudi Arabia. Some of his responsibilities have included 3D modeling, developing plot plans, nozzle orientation, rack design, and material takeoffs. Currently he works as a senior piping engineer for Dodsal Engineering & Construction in Dubai where he is the lead engineer for piping systems on a $1 billion water treatment project in Kuwait. Previously he has worked for companies like Petrofac, Toyo Engineering, and Shell on various oil and gas, petrochemical and refinery projects.
M. Ilayaraja is a piping designer with over 14 years of experience in petroleum and oil and gas projects. He has extensive experience using PDS/PDMS for piping layouts, support modeling, and isometric drawings. Some of the projects he has worked on include offshore projects in Norway and onshore projects in Canada, Russia, Singapore, Qatar, and India. He is proficient in PDS, AutoCAD, MicroStation, and MS Office applications.
This document is a curriculum vitae for Vipul Raghunath Vichare, summarizing his experience and qualifications as a Senior Piping Engineer. He has over 13 years of experience in piping layout engineering and design, including roles with companies like Dodsal Engineering, Reliance Industries, and Toyo Engineering India. He holds a Bachelor's degree in Chemical Engineering and additional qualifications in piping engineering. His experience includes piping layout and design, project coordination, site experience, and working on various oil and gas, petrochemical, and refinery projects around the world.
Alan Rafer is a mechanical engineer with 12 years of experience in piping engineering and construction. He has expertise in piping design, layout, and supervision using CAD software like AutoCAD, Microstation, PDS, PDMS, and Cadworx. He is interested in working in other industries and has experience leading teams and delivering projects on schedule. His most recent role was as an Area Lead Engineer at GS East Asia Manila where he oversaw proposal projects.
R. Rajasekaran is applying for the position of Senior Piping Designer. He has 14 years of experience in piping design, primarily for oil and gas projects in the Middle East. Currently, he works as a Senior Piping Designer at Tebodin & Partner LLC in Oman, where he is responsible for coordinating design teams, modeling in PDMS software, and producing piping plans, isometrics, and material take-offs. He has extensive experience working on projects for companies like Petroleum Development Oman, Occidental of Oman, and Oman Gas Company.
Amol Sawant (Piping Engineer with 10 years experience) docxAmol Sawant
Amol Sawant is a senior piping engineer with 10 years of experience in refineries, oil and gas, and fertilizer projects. He has experience managing teams of 5-8 people and fulfilling roles such as layout designer, PMC engineer, and ISO coordinator. He is proficient in SmartPlant Review, Navisworks, PDS, Caesar II, and other piping software. His most recent roles include working as a piping engineer for Medgulf Construction in Qatar and Tecnimont ICB in India.
This document contains the resume of A. Perumal, who has over 9 years of experience in piping design and engineering. He holds a B.E. in Production Engineering and has worked for several companies in Singapore on projects in oil and gas, power, and process industries. He has extensive experience in 3D modeling software like SmartPlant, CADWorx, and PDS. Some of his responsibilities include piping modeling, preparing drawings, supporting field work, and coordinating with other engineering disciplines. He provides details of several projects he has worked on involving piping design for refineries, chemical plants, and offshore facilities.
Bharathkumar has over 13 years of experience as a piping and pipeline designer. He has worked on oil, gas, and petrochemical projects in Oman, Italy, India, and Singapore. His responsibilities include preparing piping layouts, isometric drawings, material takeoffs, and fabrication drawings. He is proficient in AutoCAD, PDMS, Navisworks, and other piping design software. Bharathkumar holds a Diploma in Mechanical Engineering and safety certifications.
Syed Mahdar B. Mohamed Almashoor has over 25 years of experience in mechanical design and drafting for the oil and gas, petrochemical, and marine industries. He has extensive experience preparing piping, structural, and mechanical drawings as well as 3D models using AutoCAD. Some of the projects he has worked on include FPSOs, offshore rigs, subsea pipelines, and petrochemical plants. He is proficient in English, Malay, and technical drawing standards. Currently he works as a Process Designer for BW Offshore updating piping drawings.
The document summarizes the piping engineering experience and qualifications of Karthik Bodducherla. It lists his key skills including pipe thickness calculations, knowledge of piping codes and standards, preparation of piping drawings and documents. It then details his work experience on various oil and gas projects from 2012 to present, where he performed tasks like piping design, review of 3D models, extracting isometrics. The document also lists the software, codes and languages he is proficient in. It concludes with his personal details and qualifications which include a B.E. in Mechanical Engineering.
Anas M. H is a mechanical engineer with 6 years of experience in piping engineering projects. He has worked as a Piping Supervisor at Drydocks World in Dubai and as a Piping Engineer at Cochin Shipyard Limited in India. He has experience managing piping projects for shipbuilding and ship repairs. Anas is knowledgeable about piping design codes and standards like API, ASME, and ANSI. He is skilled in project planning, material procurement, fabrication, testing and commissioning of piping systems. Anas holds a Bachelor of Technology degree in Mechanical Engineering.
Ahmed Kamal Mohamed Tawfik is an Egyptian piping engineer with over 11 years of experience in piping design, engineering, project management, and construction. He holds a B.Sc. in Mechanical Engineering and is a member of the Egyptian Engineering Syndicate. His experience includes working on refinery, petrochemical, offshore, and power projects in Egypt, Iran, and Qatar. Currently he is a Senior Hydrotest Engineer for an ERC refinery project in Egypt, where he is responsible for test package preparation and execution.
This resume is for Sam V. Marino, a senior piping designer and site technician with over 28 years of experience in piping engineering, plant modeling, QA/QC procedures, and construction field work for oil and gas projects. He has a degree in Piping, Architectural, and Structural Drafting from Lamar University and is proficient in AutoCAD, CadWorx, PDMS, Microsoft Excel, and Word. His experience includes work as a piping designer, checker, and field coordinator on projects such as gas processing units, offshore platforms, refineries, and chemical plants.
Libin Sebastian has over 8 years of experience as a piping engineer working in oil, gas, and petrochemical projects. He has expertise in engineering, fabrication, and construction according to ASTM standards and ASME B31.3 codes. Sebastian's most recent role was as a piping engineer for the SADARA project in Saudi Arabia, where he was responsible for engineering, construction, testing, and system turnover of over 8,500 linear meters of piping systems. He also has experience working in the UAE on projects such as gas pipelines and offshore platforms.
P.Preetish Daniel is a piping designer with over 6 years of experience in piping layout drawings and isometrics using PDS 3D software. He has worked on projects in oil and gas refineries, air separation plants, and petrochemical industries. Preetish Daniel is proficient in P&ID, piping ISO drawings, GA drawings, and has experience modeling equipment, routing pipes, generating reports, and extracting isometrics from piping models. He seeks a position where he can enhance his skills and contribute to an organization.
Mohammad Shahid is applying for the position of Piping Draughtsman/Designer. He has 7 years of experience in oil, gas, chemical, and pharmaceutical industries. He is currently working as a Piping Designer for Saudi Arabian Kentz Co. Ltd. in Al-Khobar, Saudi Arabia. He has knowledge of software like MicroStation, AutoCAD, and piping codes/standards like ASME B31.3. He is looking to further his career in the oil and gas or petrochemical industries.
Result oriented professional with 4 years experience in field of steel structure.
Proficient in developing & streamlining systems with proven ability to enhance
operational effectiveness and meet operational goals within the cost, time & quality
parameters.
Adept in enhancing production process operations, optimizing resource utilization,
escalating productivity and operational efficiencies.
Possess strong analytical, problem-solving and interpersonal communication skills
with a good positive attitude in team play.
Resume - Wan Sazali, PDMS Piping DesignerWan Sazali
W. Mohd Sazali bin W. Muda is a Malaysian piping designer with 8 years of experience in engineering design, fabrication, and as-built drawing projects for both offshore and onshore facilities. He is proficient in piping modeling software like PDMS and AutoCAD, and has worked on projects in Malaysia, Qatar, and Turkmenistan for companies including PETRONAS, Shell, and Hess. His current role is as a PDMS piping designer for ARMADA TPCE in Kuala Lumpur.
Chandramohan P has over 18 years of experience in pipeline and piping design. He has worked on numerous oil and gas projects in India, the Middle East, and Iraq. Some of his responsibilities include preparing pipeline alignments, crossings, layouts, and isometric drawings; developing engineering data; and assisting the drafting team. He is proficient in AutoCAD, Microstation, and other software.
This document summarizes the career experience of Nazrul Mazdi Mokhtar as a piping designer with over 20 years of experience. He has worked on various oil, gas and petrochemical projects for companies like Foster Wheeler, Technip, Shell and BP. His responsibilities have included piping modeling, layout design, producing drawings, coordinating with other disciplines, and supporting construction and commissioning activities. He is proficient in several piping software programs and has extensive experience in designing systems for refineries, gas plants, power plants and other process facilities.
Pankaj Souriya is a design engineer from India with over 10 years of experience in piping, construction, and manufacturing. He has expertise in oil and gas pipeline design as well as 3D modeling software like AutoCAD, SolidWorks, and CATIA. Some of his responsibilities have included preparing drawings, calculations, reports, and specifications for projects in industries like oil and gas. He is seeking a challenging engineering position that offers career growth.
A Gomez Resume Pipe Designer_Checker_plainAmerico Gomez
This document provides a summary of Americo Gomez's experience as a senior piping designer with over 23 years of experience in the oil and gas industry. He has extensive experience designing piping systems for grassroots and expansion projects using various 3D modeling software. He has also participated in field visits and provided design review and coordination support. Some of his project experience includes work for Suncor Energy, Imperial Oil, Saudi Aramco, and TransAlta.
This document is a resume for Padmanabh M. Dhobale, a piping design engineer with over 11 years of experience working on projects in countries like the UAE, India, Egypt, Singapore, and Saudi Arabia. Some of his responsibilities have included 3D modeling, developing plot plans, nozzle orientation, rack design, and material takeoffs. Currently he works as a senior piping engineer for Dodsal Engineering & Construction in Dubai where he is the lead engineer for piping systems on a $1 billion water treatment project in Kuwait. Previously he has worked for companies like Petrofac, Toyo Engineering, and Shell on various oil and gas, petrochemical and refinery projects.
M. Ilayaraja is a piping designer with over 14 years of experience in petroleum and oil and gas projects. He has extensive experience using PDS/PDMS for piping layouts, support modeling, and isometric drawings. Some of the projects he has worked on include offshore projects in Norway and onshore projects in Canada, Russia, Singapore, Qatar, and India. He is proficient in PDS, AutoCAD, MicroStation, and MS Office applications.
This document is a curriculum vitae for Vipul Raghunath Vichare, summarizing his experience and qualifications as a Senior Piping Engineer. He has over 13 years of experience in piping layout engineering and design, including roles with companies like Dodsal Engineering, Reliance Industries, and Toyo Engineering India. He holds a Bachelor's degree in Chemical Engineering and additional qualifications in piping engineering. His experience includes piping layout and design, project coordination, site experience, and working on various oil and gas, petrochemical, and refinery projects around the world.
Alan Rafer is a mechanical engineer with 12 years of experience in piping engineering and construction. He has expertise in piping design, layout, and supervision using CAD software like AutoCAD, Microstation, PDS, PDMS, and Cadworx. He is interested in working in other industries and has experience leading teams and delivering projects on schedule. His most recent role was as an Area Lead Engineer at GS East Asia Manila where he oversaw proposal projects.
R. Rajasekaran is applying for the position of Senior Piping Designer. He has 14 years of experience in piping design, primarily for oil and gas projects in the Middle East. Currently, he works as a Senior Piping Designer at Tebodin & Partner LLC in Oman, where he is responsible for coordinating design teams, modeling in PDMS software, and producing piping plans, isometrics, and material take-offs. He has extensive experience working on projects for companies like Petroleum Development Oman, Occidental of Oman, and Oman Gas Company.
Amol Sawant (Piping Engineer with 10 years experience) docxAmol Sawant
Amol Sawant is a senior piping engineer with 10 years of experience in refineries, oil and gas, and fertilizer projects. He has experience managing teams of 5-8 people and fulfilling roles such as layout designer, PMC engineer, and ISO coordinator. He is proficient in SmartPlant Review, Navisworks, PDS, Caesar II, and other piping software. His most recent roles include working as a piping engineer for Medgulf Construction in Qatar and Tecnimont ICB in India.
This document contains the resume of A. Perumal, who has over 9 years of experience in piping design and engineering. He holds a B.E. in Production Engineering and has worked for several companies in Singapore on projects in oil and gas, power, and process industries. He has extensive experience in 3D modeling software like SmartPlant, CADWorx, and PDS. Some of his responsibilities include piping modeling, preparing drawings, supporting field work, and coordinating with other engineering disciplines. He provides details of several projects he has worked on involving piping design for refineries, chemical plants, and offshore facilities.
Bharathkumar has over 13 years of experience as a piping and pipeline designer. He has worked on oil, gas, and petrochemical projects in Oman, Italy, India, and Singapore. His responsibilities include preparing piping layouts, isometric drawings, material takeoffs, and fabrication drawings. He is proficient in AutoCAD, PDMS, Navisworks, and other piping design software. Bharathkumar holds a Diploma in Mechanical Engineering and safety certifications.
Syed Mahdar B. Mohamed Almashoor has over 25 years of experience in mechanical design and drafting for the oil and gas, petrochemical, and marine industries. He has extensive experience preparing piping, structural, and mechanical drawings as well as 3D models using AutoCAD. Some of the projects he has worked on include FPSOs, offshore rigs, subsea pipelines, and petrochemical plants. He is proficient in English, Malay, and technical drawing standards. Currently he works as a Process Designer for BW Offshore updating piping drawings.
The document summarizes the piping engineering experience and qualifications of Karthik Bodducherla. It lists his key skills including pipe thickness calculations, knowledge of piping codes and standards, preparation of piping drawings and documents. It then details his work experience on various oil and gas projects from 2012 to present, where he performed tasks like piping design, review of 3D models, extracting isometrics. The document also lists the software, codes and languages he is proficient in. It concludes with his personal details and qualifications which include a B.E. in Mechanical Engineering.
Anas M. H is a mechanical engineer with 6 years of experience in piping engineering projects. He has worked as a Piping Supervisor at Drydocks World in Dubai and as a Piping Engineer at Cochin Shipyard Limited in India. He has experience managing piping projects for shipbuilding and ship repairs. Anas is knowledgeable about piping design codes and standards like API, ASME, and ANSI. He is skilled in project planning, material procurement, fabrication, testing and commissioning of piping systems. Anas holds a Bachelor of Technology degree in Mechanical Engineering.
Ahmed Kamal Mohamed Tawfik is an Egyptian piping engineer with over 11 years of experience in piping design, engineering, project management, and construction. He holds a B.Sc. in Mechanical Engineering and is a member of the Egyptian Engineering Syndicate. His experience includes working on refinery, petrochemical, offshore, and power projects in Egypt, Iran, and Qatar. Currently he is a Senior Hydrotest Engineer for an ERC refinery project in Egypt, where he is responsible for test package preparation and execution.
This resume is for Sam V. Marino, a senior piping designer and site technician with over 28 years of experience in piping engineering, plant modeling, QA/QC procedures, and construction field work for oil and gas projects. He has a degree in Piping, Architectural, and Structural Drafting from Lamar University and is proficient in AutoCAD, CadWorx, PDMS, Microsoft Excel, and Word. His experience includes work as a piping designer, checker, and field coordinator on projects such as gas processing units, offshore platforms, refineries, and chemical plants.
Libin Sebastian has over 8 years of experience as a piping engineer working in oil, gas, and petrochemical projects. He has expertise in engineering, fabrication, and construction according to ASTM standards and ASME B31.3 codes. Sebastian's most recent role was as a piping engineer for the SADARA project in Saudi Arabia, where he was responsible for engineering, construction, testing, and system turnover of over 8,500 linear meters of piping systems. He also has experience working in the UAE on projects such as gas pipelines and offshore platforms.
P.Preetish Daniel is a piping designer with over 6 years of experience in piping layout drawings and isometrics using PDS 3D software. He has worked on projects in oil and gas refineries, air separation plants, and petrochemical industries. Preetish Daniel is proficient in P&ID, piping ISO drawings, GA drawings, and has experience modeling equipment, routing pipes, generating reports, and extracting isometrics from piping models. He seeks a position where he can enhance his skills and contribute to an organization.
Mohammad Shahid is applying for the position of Piping Draughtsman/Designer. He has 7 years of experience in oil, gas, chemical, and pharmaceutical industries. He is currently working as a Piping Designer for Saudi Arabian Kentz Co. Ltd. in Al-Khobar, Saudi Arabia. He has knowledge of software like MicroStation, AutoCAD, and piping codes/standards like ASME B31.3. He is looking to further his career in the oil and gas or petrochemical industries.
Result oriented professional with 4 years experience in field of steel structure.
Proficient in developing & streamlining systems with proven ability to enhance
operational effectiveness and meet operational goals within the cost, time & quality
parameters.
Adept in enhancing production process operations, optimizing resource utilization,
escalating productivity and operational efficiencies.
Possess strong analytical, problem-solving and interpersonal communication skills
with a good positive attitude in team play.
This document provides a summary of Subin Singh's qualifications and experience. It outlines his educational background of a B.E in Mechanical Engineering from Annamalai University. It also details his 4 years of experience in steel structural projects, quality assurance, and operations management. Finally, it lists several steel structural projects he has worked on in Saudi Arabia, Qatar, and the UAE for companies like ThyssenKrupp and Demag Cranes.
Muhammed Rafi has over 12 years of experience as a piping engineer specializing in stress analysis and piping design. He has extensive experience using CAESAR II and other software to perform stress analysis and flexible piping design for oil, gas, and petrochemical projects. He is looking for a new job opportunity utilizing his technical skills and management experience in piping engineering.
This document provides a summary of a mechanical engineer's professional experience. It outlines the engineer's expertise in areas such as static equipment design, piping and structural stress analysis, finite element analysis, and project management. It then details the engineer's work history at three companies over six years, including roles in equipment design, engineering, construction, and maintenance. Key projects are listed for each role.
David Turnbull Beveridge is a Principal Piping Designer with over 50 years of experience in mechanical engineering and piping design. He has worked on numerous offshore oil and gas projects for companies like Wood Group, BP, Enquest, and Apache. His experience includes preparing 3D models, piping isometrics, bills of materials, and assisting other engineers. He is proficient in software like PDMS, AutoCAD, and Microstation.
working skills :
o Preparation of a 3D PDMS model for all plant areas within the contract Scope,
o The 3D model is showing the plant and the integration into the existing. The
Model includes:
i. Plant co-ordinates and elevations
ii. All equipment items acc. to equipment list.
iii. Clearances for disassembly, maintenance and operation.
iv. Clearances for pipe- and cable runs.
v. Requirements for steel structure (buildings & pipe racks).
vi. Pipe routing for major process piping (main process route).
vii. Equipment Arrangement according the layout standard & safety gaps
viii. The required steel structure Develop and issue isometric drawings including pipe
Supports for construction using 3D Model.
o Preparing complete design of piping general arrangement layouts and key plans using P&ID's and vendor data.
o Design Review for lines, equipment and structure in Navisworks, & PDMS Reviews for completeness (routing feasibility and requirements of process and accessibility).
o Prepare piping Daily & weekly reports.
o Attend hazed kick of meeting
o Follow up tenders
o Attend engineering weekly meetings to review progress & schedule
o Field Technical support.
o Site verification on isometric Drawing & layouts for new lines/tie in's.
o Developing AS BUILT Drawing.
o Testing procedures as applicable to Fabricated Equipment & Piping with knowledge of Isometric drawings and P& ID's
o Prepare transmittal report
And now i am working a piping design engineer at UNEPP
You can find my resume attached below as i will gladly provide any further information may be required
thank you
Best Regards
Mohamed osama
Asraful Hoque Molla has over 14 years of experience as a civil and structural designer. He has extensive experience using modeling software like SP3D, PDS, and PDMS to create 3D models and prepare detailed drawings using MicroStation and AutoCAD. Currently he works as a senior designer at Jacobs ZATE where he is responsible for modeling, design drawings, and reviewing drawings for compliance on various oil, gas and petrochemical projects in Saudi Arabia. He has worked on numerous projects in the Middle East and Asia.
Gary Randall has over 25 years of experience as a mechanical and piping design engineer. He has extensive experience managing projects from design through installation and site supervision. His skills include piping modeling, design, and stress analysis using various CAD software packages. He has worked on projects in various industries including paper/tissue, sugar processing, and renewable energy. His most recent roles include site project manager for an Ocado warehouse installation and piping designer for modifications to steam systems at paper mills.
CV of Karan Vinayak - piping design engineerKaran Vinayak
I have experience in the field of Oil and Gas, Chemical Process Plant and Water Transmission Network Pipeline. (Piping Layout, Piping GAD, isometric, Bill of Materials, Pipeline Profile, Alignment Sheet, Co-Ordinate Drawing). I have software skills in Autocad, Autoplant, PDMS and CAESAR-II. Currently I am working in Sharjah on UG Water Pipeline Projects.
I am technically qualified for job positions like Piping/Pipeline Designer, Piping/Pipeline Engineer, Piping Quantity Estimator etc.
Chayan Biswas is a mechanical design professional with over 23 years of experience in product design and development. He has expertise in static and dynamic design of machinery, product design according to market needs, and managing the full product lifecycle. Currently he is a Senior Manager of Design at APE Power Pvt Ltd, where he oversees turbine design and system design. Previously he held design and management roles at several engineering companies, where he designed hydraulic equipment, presses, pumps, cranes and more. He has strong skills in CAD, CAE, design calculations, and mechanical standards.
Abdul Niyas (piping designer-draftsman)Niyas Kumble
This document provides a summary of Abdul Niyas N's career and qualifications. It outlines his objective of seeking a challenging position in piping or pipeline design that offers growth. His experience includes working as a Piping Designer/Draftsman for Horizons Union Oilfield Operating Services in Abu Dhabi from 2014 to present. Prior to that, he worked as an Engineer for FLSMIDTH PVT. LTD in Chennai, India from 2012 to 2013 and as a QC Inspector for WIPRO INFRASTRUCTURE ENGINEERING in Chennai from 2012. He has a Diploma in Mechanical Engineering and skills in AutoCAD, CADWorx, SolidWorks, LISCAD, Civil
Tanveer Phansopkar has over 11 years of experience as a piping draughtsman. He has worked on projects in industries including oil and gas, refineries, petrochemicals, and process plants. Some of the key responsibilities of his role include preparing piping drawings, isometric drawings, material take-offs, and ensuring designs meet industry codes and standards. He has a diploma in Mechanical Draughtsmanship and is proficient in AutoCAD, PDS, and Microstation software. Currently residing in Mumbai, India, Phansopkar is seeking new opportunities as a piping draughtsman.
Syed Mukthar Ahamed is a senior HVAC and plumbing engineer and quality control inspector with over 15 years of experience. He has extensive knowledge of HVAC and plumbing systems including design, site implementation, quality inspections, and maintenance. Some of his responsibilities include inspecting plumbing systems, preparing design documents, coordinating projects, and ensuring work meets quality standards. He is proficient in AutoCAD, Microsoft Office, and has managed teams on projects in Saudi Arabia and Qatar.
This document contains the resume of Salah Abd Elmonsef, a mechanical engineer with 13 years of experience in piping, tank, duct, and plate design, layout, material selection, stress analysis, fabrication, and erection. He has worked on oil and gas, power, and petrochemical projects. His skills include AutoCAD, Autodesk Inventor, SolidWorks, PROSTRUCTURES, AutoPIPE, Microsoft Office, and he is a beginner in SolidEdge and PDMS. He is seeking a position at an organization that empowers employees with knowledge and encourages teamwork.
Kannan is a senior piping designer with over 11 years of experience in oil and gas projects. He has extensive experience in piping design, drafting, and project management for offshore and onshore oil and gas facilities. Some of his skills include piping layouts, isometric drawings, fabrication drawings, site surveys, and ensuring quality compliance. He is proficient in software like PDMS, CADWorx, and AutoCAD. Currently he works as a piping designer for Saipem in Angola designing plots, equipment layouts, and pipe supports.
Anisur Rahman has over 6 years of experience as a Mechanical and Piping Draughtsman. He has worked on projects in Oman, Qatar, and India for various organizations drafting piping drawings, producing mechanical drawings, and updating existing drawings. His responsibilities include preparing fabrication drawings, piping isometrics, general arrangements, bills of quantities, and handling various types of drawings for steam piping, blow down piping, and more. He has expertise in AutoCAD, MicroStation, and other computer-aided design software.
(1) El-Mostafa Mohammed Omar Ahmed Beh is seeking a position in mechanical engineering where he can utilize over 15 years of experience in mechanical and piping projects. (2) He has extensive experience managing piping projects in various industries including oil and gas, petrochemical, and power plants. (3) His responsibilities have included supervision of fabrication, installation, testing, and commissioning of piping systems as well as managing health and safety.
This document provides a summary of an individual's qualifications and experience as a structural and mechanical designer with over 15 years of experience in CAD software such as Solidworks and AutoCAD. Their experience includes projects in offshore oil and gas, marine, diving systems, and more. Their education includes an HNC in 2D and 3D CAD from Stow College in 2000.
I am a self-motivated individual. I put my all into everything I do to get the job done effectively and efficiently. I could say that challenging work and the pursuit of success drives me to deliver the best out of me. I always ensure that my clients get the best service which I can provide. I have always felt that it is important, both to me personally, and for my company that my clients are fully satisfied and provides a positive feedback. My drive to constantly develop my technical and interpersonal skills is the reason for my good reputation within my present organization and among all my clients.
1. NASIR MAHMOOD
Experiences: More than 9 year’s of professional working experience in Construction and maintenance of
OIL&GAS, Petrochemical and GAS plants as a Draughtsman (Piping & Mechanical
Equipments), Familiarization & understanding of Saudi aramco Engineering
Standard & Procedures for Piping Drawings/ instrumentation systems awareness &
Understanding of industry code Practices.
Adgas DAS ISLAND: Draughtsman Piping/Mechanical
15-SEP 2015 to Till date
Client: ABU DHABI GAS (LNG & OAG)
Company: Qatar Engineering and Construction Company LLC.
Responsibilities:
working in Piping Isometric for MTO for TA.
Preparation of IFC drawings from MTO drawings to Pre-Fabrication according to adgas standard and
procedures.
According to site requirement preparation of Mechanical drawings, layout, site sketches,shutdown
village layouts, structural/supports, equipments and as well 3D drawings.
Assist for Inch Dia Entry & Tabulation
Plot SOW in layout.
Co-ordinate work shop during Pre-fabrication.
Assist Schedulers / QC during TA.
Update As-built drawings according to site changes and submission to client.
SHAH GAS DEVELOPMENT: Draughtsman Piping/Mechanical
06-AUG 2012 to 03 MAR 2013
Client: SAIPEM
Company: Descon Engineering Ltd.
Responsibilities:
worked in SPOOLGEN Pre-Fabrication Department in saipem site office SHAH GAS
DEVELOPMENT ABU DHABI
IGD-5 Process Plant Abu dhabi Draughtsman Piping/Mechanical
06-Nov 2011 to 12 JUL 2012
Client: GASCO
Company: Descon Engineering Ltd.
Responsibilities:
I completed assignment of Underground GRE/GRV Piping Drawings. Shop drawings for spools,
Joint Marking, joints details, Cut lists with bill of material According to GASCO standard and
Procedures.
Prepared of Piping spool details drawings in Gasco standards for site installation of METALIC and
GRE Piping drawings above ground.
Preparation of revised spool drawings according to given material from client.
Prepared the MTO’s for structural and piping support drawings which received from client.
To prepare the spooling of piping with SpoolGen according to client’s given spooling procedures on
Mobile: +971-50-3683732
E-mail: mahmood_art2003@yahoo.com
sahibzada_2@yahoo.com
2. IDF files from client.
Working on Piping Revise drawings according to overall daily welding/progress report Shop and
Field Joints and co-ordination with QA/QC department.
Excellent experience to prepare 3D Model drawings according to site requirement JGC Approved
and Excellent performance of preparation of MOD:SD/001/024/09:REPLACEMENT of 7-E-107
3D Model drawing of replacement of sulphur condenser for ADGAS-TA-2011 Presentation.
Ability to Design section drawings of piping or general arrangement layout drawings of Mechanical,
structure 2D and 3D as per requirement.
Well known to work on VENDOR manual drawings of Piping As-built and AMERON manual
drawings according to client procedure.
ADGAS OFFSHORE OAG-1 Draughtsman (Piping/Mechanical)
05-Apr-09 to 06-Aug-10
Client: ABU DHABI GAS
Company: Technip / Descon Engineering Ltd.
Responsibilities:
Updating the QA/QC records in TAKEOVERxp handover department MEPI Technip. Scan the
QA/QC Records and update in TAKEOVERxp.
Ensure documents issuance to Company and sub contractor. File PCC Documentation to proper level.
Upload punch list in TOxp Update Master punch list in TOxp File punch list Receive the QA/QC
Forms of each department.
Check / update the system numbers and update in PCC OR Construction database as
required. Type on excel the Punch list. Update the progress in TOxp (Date of complition
QA/QC Records).
Update the progress in TOxp (Date of complition punch list Records). Generate Check List
Systems status in all disciplines.
LCWU Jhang Campus Instructor Industrial Design (BCID/BFA Hons) ART Department,
17-Sep 07 to 31-Mar 09
Client: Lahore College for Women University
Campus: JHANG CAMPUS www.lcwu.edu.pk
Responsibilities:
Classroom Lectures regarding Concept of drafting and designing.
Manual drafting and different jobs to supported to art.
Working in parabolic, hy parabola, cone, hexagonal, development, human eye view. Bird eye view as
well as working in first angles, second angle and third angles views.
Rendering of different type of 3D modeling jobs in Auto CAD Files.
Excellent communication skill and coordination with students to focus on design models and good
command on adobe foto shop computer lab.
Introduction to drafting standard sheet setting and design of models.
Al-marai Draftsman (Piping Mechanical)
03-May-07 to 03-Sep-07
Al-Kherj KSA
Client: Al-marai (Saudi diary Processing Plant CPP2).
Contractor: Al-akhdood Construction Company
Company: APV British based company
Responsibilities:
As-built ISO GLYCOL CLADED Return and Flow Pipe lines for fans, cassettes and AHU’s
isometric Drawings with material take off.
Preparation of isometric Drawings from Piping Plan Auto CAD drawings according to sabic
3. hadeed standard and procedures.
As-built drawings of 6F08 & AHU50 CASSETTES AHU ISO-15 NB, AHU-ISO-20 NB
AHU-ISO-25 NB, -ISO-40 NB & AHU-ISO-50 NB. Area - 4.1 to Area – 4.5 and Area – 4.7
& Area 4GC7. Submitted drawings according to al-marai standard and Procedure.
N.C.C Draftsman (Piping Mechanical)
14-Jun-05 to 03-Nov-06
Al-Jubail KSA
Client: HADEED (Saudi Iron and steel company).
Contractor: National Contracting Company
Project: SVA N.C.C
Company: National Contacting Company
Responsibilities:
As-built drawings of Piping and steel structure of Furnas area (Natural Gas, Combustion air,
Compressed Air, Burners, Nitrogen and Hydraulic Pipelines) drawings.
Preparation of isometric Drawings from Piping Plan Auto CAD drawings according to sabic
hadeed standard and procedures.
As-built drawings of water- Station, Pump house, Cooling water station hydraulic- Room and
& sketches of overhead & boom cranes.
Different type of site layouts of SVA Piping isometrics Drawings in Saudi iron and steel
company hadeed.
Feb- 05 to Jun-05 Draftsman Piping/Mechanical
IWS (Inspection work Sheet)
Client: Saudi Aramco (Riyadh Oil Refinery)
Project: Area A, B & D
Company: Saudi Aramco Engineering Division
Responsibilities:
Appointed as a Piping design draughtsman. Working on IWS (Inspection work sheet)
maintenance and Fabrication of Piping in Riyadh Refinery in manual Drawings with material
take off in Riyadh oil Refinery.
Preparation of Piping Manual As-built drawings and Piping detail drawing, Knowledge of
creat ISOMETRIC bill of material for above mentioned areas according to Saudi aramco
Applicable Standard- and Specifications.
Preparation of ISOMERIC Piping Detail drawings marking with spool wise and joint
marking shop and field including different type of Pipe supports with Bill of material.
Update P&ID according to change of isometric drawings or replacement of line. Upgrade the
drawings to change locations of fire equipments locations.
Involvement in site to Installation of piping and fitting of flanges, elbows and related pipe
supports Large bore and small bore.
G.I.C Draftsman (Electrical/Mechanical)
09-Dec-04 to 31-Jan-05
Riyadh Industrial Estate KSA
Client: Sabic TSL (Techanical Services Laboratory).
Contractor: Gulf Industrial Complex
Project: Electrical
Company: Sabic R & D
Responsibilities:
Appointed as a CAD draughtsman Electro/Mechanical, Electrical lighting layout, Panel
4. layout, Power layout, Cable tray layouts in Auto CAD drawings according to sabic standard
and procedures.
As-built drawings of Single Line Diagram layout, Panel Descriptions with electrical Legends
As-built Drawings submitted to sabic R&D Riyadh Industrial Estate according to Saudi
sabic standards.
Jul- 04 to Oct-04 Draftsman Piping/Mechanical
Piping As-built Red Line standard Job No.268 & 269
Client: Saudi Aramco (Uthmaniyah Gas Plant)
Project: Upgrade Fire and Utility Water System
Company: Petcon / FAFCO
Responsibilities:
Appointed as a Piping design draughtsman. Project Upgrade Fire and Utility water system
underground and above ground at UTHMANIYAH Gas Plant udaliyah.
As-built RED LINE isometric & piping plan manual Drawings. Preparation of drawings with
material takes off. DELUGE VALVE Drawings comply with Saudi aramco’s IFC Drawings
Applicable Standard- and Specifications.
Existing Fire water and Utility water piping to be I.C.L. (Internal cemented lines) at
UTHMANIYAH gas plant.
The areas where my work involvement are CHILLDOWN, Area 24-03, 24-04.Product Surge
& Refrigerant Make- Up (RMU) area 25-07, Utility area and SULFUR Area.
To Arrangement Fire Protection equipments (HR Hose Reel, PIV Post -Indicator Valve, FH
Fire Hydrant, FM Fire Monitor Piping & generation of isometric with respect to requirements
in plant.
Preparation of Piping SKID DETAILS, vertical CHLORINE STORAGE TANK (1.210m cap:
400 usg) Preparation of Piping Details Drawings in auto CAD. 3”, 4”, 6”, 8”, 10”, 12” & 20”
inches Diameters Pipe- Lines in-situ fabricated and installed above mentioned Areas
according to Saudi aramco’s standards and Specifications.
Jan- 03 to Apr-04 Draftsman Mechanical
Errection / Fabrication
Client: Al-rehmat Traders Textile Processing Unit
Project: Jarranwala Road, Khurrianwal, Faisalabad Pakistan.
Company: Al-rehmat traders
Responsibilities:
Errection & Foundation experience of Thermosole (Morrison), fully automatic Tensionless
calendar (changzhou), Drying range (Morrison), Tensionless Dryer (jiangzou), Bleaching
Range, Mercerizing, Pressure jiggers, Sanforizing (don fang) machines.
During Errection of above mentioned machines I Prepared civil foundation drawings and
Draw complete Layouts machines.
Installation drawings of machines and complete plan drawings according to requirements of
client in Auto CAD 2000.
I performed as record keeper responsibilities to update Data and drawings of mechanical and
civil discipline.
Preparation of Utility Drawings of Piping Plan and Isometric drawings like Steam, Pure
water, Gas and caustic.
I also design piping isometric drawings of power house on same project.
5. Qualification/ Certifications:
1999 - 2002
Draftsman (Mechanical) Government Techanical Training Institute, Jhang sadar.
Apr, 2001 Authorized Autodesk Training Center (ESTC)
Auto CAD 2000 Engineering Systems Training Center, Lahore.
Jul, 2001 Edge Systems International
Edge Foundation Computer Course Lahore office.
Apr, 2004 Bentley Training Center (ESTC)
Auto Plant 3.0 3D (Piping, Equipment & Isometric) Engineering Systems Training Center, Lahore.
International Cods & Standards:
Well familiar with
ANSI Pressure Piping codes B31.1.0
AWS, ASTM Codes and Standards.
Saudi Aramco Engineering Standards about PIPING/Welding.
Piping isometric study/Piping & instrument diagram.
Piping plan layout (PPL) as well as (UTI), (FPS), (FDN), (HYD) and P&ID.
Sabic design procedure for piping and industry code and practices.
Computer Skill:
Microsoft Office Word, Excel Edge Systems International Lahore.
AutoCAD2000 Engineering Systems Lahore office.
Auto Plant Engineering Systems Lahore office.
Smart Plant Intergraph Spoolgen
Personal Information:
DOB: 05-Feb 1974
C.N.I.C: 33202-1432439-7
Passport No: HC 0154392
Date of Expiry: 08-Sep-2017
Permanent Address: Malik House, Lane Opposite Faisal Mills Green Town Toba Road Jhang Sadar P.O Box
No.35200, Pakistan.
Hobbies and Interest:
Explore International affairs & Reading Newspapers