k10611
•Download as PPTX, PDF•
0 likes•167 views
This document outlines an automatic bottle filling system project submitted by Mohammad Shahbaz, a 6th semester B.Tech (ME) student at Career Point University. The project submission is addressed to Amardeep, an Assistant Professor in the Mechanical Engineering department, and details the table mechanism, filling section, chute mechanism, capping section, sensing mechanism, and control section components of the automatic bottle filling system.
Report
Share
Report
Share
Recommended
Automatic Metro
The document discusses driverless, unattended metro systems as a solution that can satisfy the needs of both transit operators and passengers. It notes key operator needs like system availability, reliability, and cost savings, as well as passenger needs like short wait times, comfort, and safety. A driverless metro without on-board personnel is presented as a solution that meets all of these needs by allowing flexible operation, adjustable capacity, and lower maintenance costs while maintaining high performance, availability, and reliability. Examples are given of existing driverless metro lines in Copenhagen and their high levels of service availability over several years.
An Analysis of Runway Capacity at International Airport Sultan Aji Sulaiman B...
This document analyzes the runway capacity at Sultan Aji Sulaiman International Airport in Balikpapan, Indonesia. The airport has experienced 12.2% annual growth in aircraft movements over the last 5 years. However, the single runway and five exit taxiways limit its capacity. To increase capacity, the study examines runway occupancy times for landing and takeoff and different exit taxiway configurations. Reconstructing one exit taxiway into a rapid exit taxiway could increase the runway's capacity from 21 to 28 aircraft movements per hour. Literature on runway and taxiway design is also reviewed to understand factors that influence capacity such as taxiway layout, location and type.
A Real-time Public Bus Scheduling System
This was the project of my bachelor program -2015
This system detects the bus location from the device of the bus and sends the information to the system. Then the system calculates the estimated time (i.e. when the bus is coming to the next stops). The passenger of the bus come know about the timing of the bus, using android app. This system is a combination of web-based software as well as the Android app. The future plan is to show the timing in a digital board at each bus stop.
Innovation in gcc-railway
Finmeccanica is an Italian manufacturer specializing in high technology sectors. Ansaldo STS is a subsidiary of Finmeccanica that provides railway signaling systems and mass transit solutions worldwide. The document discusses Ansaldo STS's projects developing driverless metro systems and catenary-free tramway solutions, highlighting case studies in Copenhagen, Riyadh, and Naples. It also outlines Ansaldo STS's global presence and financial details as an internationally operating railway technology company.
Problema 6
El documento presenta un algoritmo gráfico simple que solicita al usuario ingresar dos números, calcula el cuadrado de cada número, suma los resultados y muestra el valor final.
4 Task Management Systems To Improve Productivity
Looking for a better way to manage your to-do list? Here are 4 different systems many people use! Both paper and electronic options!
Recommended
Automatic Metro
The document discusses driverless, unattended metro systems as a solution that can satisfy the needs of both transit operators and passengers. It notes key operator needs like system availability, reliability, and cost savings, as well as passenger needs like short wait times, comfort, and safety. A driverless metro without on-board personnel is presented as a solution that meets all of these needs by allowing flexible operation, adjustable capacity, and lower maintenance costs while maintaining high performance, availability, and reliability. Examples are given of existing driverless metro lines in Copenhagen and their high levels of service availability over several years.
An Analysis of Runway Capacity at International Airport Sultan Aji Sulaiman B...
This document analyzes the runway capacity at Sultan Aji Sulaiman International Airport in Balikpapan, Indonesia. The airport has experienced 12.2% annual growth in aircraft movements over the last 5 years. However, the single runway and five exit taxiways limit its capacity. To increase capacity, the study examines runway occupancy times for landing and takeoff and different exit taxiway configurations. Reconstructing one exit taxiway into a rapid exit taxiway could increase the runway's capacity from 21 to 28 aircraft movements per hour. Literature on runway and taxiway design is also reviewed to understand factors that influence capacity such as taxiway layout, location and type.
A Real-time Public Bus Scheduling System
This was the project of my bachelor program -2015
This system detects the bus location from the device of the bus and sends the information to the system. Then the system calculates the estimated time (i.e. when the bus is coming to the next stops). The passenger of the bus come know about the timing of the bus, using android app. This system is a combination of web-based software as well as the Android app. The future plan is to show the timing in a digital board at each bus stop.
Innovation in gcc-railway
Finmeccanica is an Italian manufacturer specializing in high technology sectors. Ansaldo STS is a subsidiary of Finmeccanica that provides railway signaling systems and mass transit solutions worldwide. The document discusses Ansaldo STS's projects developing driverless metro systems and catenary-free tramway solutions, highlighting case studies in Copenhagen, Riyadh, and Naples. It also outlines Ansaldo STS's global presence and financial details as an internationally operating railway technology company.
Problema 6
El documento presenta un algoritmo gráfico simple que solicita al usuario ingresar dos números, calcula el cuadrado de cada número, suma los resultados y muestra el valor final.
4 Task Management Systems To Improve Productivity
Looking for a better way to manage your to-do list? Here are 4 different systems many people use! Both paper and electronic options!
Internship--programming ideas
This document provides details for planning a youth baseball camp, including potential activities, equipment needs, costs, and staffing requirements. It recommends a variety of low-cost activities that require little to no equipment such as team-building games, yoga, and guest speakers. Sports like archery, frisbee golf, and volleyball are suggested but would require purchasing equipment. The document also outlines counselor duties and qualifications for coaches/trainers. Overall it aims to provide a full week of engaging activities while working within a budget.
K10611 OPC
1) The document discusses quality assurance and control in hospitals, defining quality and outlining the importance of total quality in healthcare.
2) It explores the history and principles of the total quality management (TQM) movement in healthcare and tools used for quality assurance like audits, process management techniques, and quality systems.
3) Continuous quality improvement is important to achieve the highest levels of performance through regular planning, execution, and evaluation cycles.
Best practices in designing a blended learning course
This document outlines best practices for designing a blended learning course. It begins with an introduction to the University of Malaya and discusses the reshaping of education due to globalization and technology. Blended learning combines online and face-to-face learning. The top 10 best practices for course design are then outlined: 1) Focus on learning outcomes over technology, 2) Choose an appropriate instructional model, 3) Balance online and in-person delivery modes, 4) Redefine the teacher's role, 5) Consider optimal class sizes, 6) Support varying technology skills, 7) Balance content development time, 8) Implement effective assessment and feedback, 9) Allow time for teacher professional development, and 10) Engage students.
CONS6817_S03'16
The document discusses various procurement options including:
1) Traditional design-bid-build (DBB), design-build (DB), and novated design-build where the design team is transferred to the contractor.
2) Integrated options like package deal, turnkey, develop and construct, and design-build-leaseback.
3) Management options where the architect's role is separated into project manager, design manager, and design architect to better integrate design and construction.
k11922 opc
The document discusses ERP implementations at several food companies. It describes how Cadbury implemented SAP ERP in 2005 but faced initial problems that led to excess inventory. Similarly, Hershey rushed its ERP implementation in 1999 in 2.5 years instead of the recommended 4 years, which caused order fulfillment issues and a $150 million loss in sales. The key lessons are to avoid squeezing timelines, use a phased approach, thoroughly test systems, and avoid go-lives during busy periods.
Becoming 21st Century Educators
This document discusses the changing role of teachers in the 21st century classroom. It notes that internet technology is reshaping education and the skills needed for the modern workforce. The roles of both students and teachers are evolving - students are more connected and want to create digital content, while teachers must promote technology use, support learner-centered approaches, and help students become global citizens. Overall, the document argues that teachers need to continue learning and embracing new technologies in order to effectively educate students for a digital world.
Chapter 5 Part I: Intrapersonal Communication
Presentation created by Andi Narvaez for COMM 107 - Oral Communication: Principles and Practice
University of Maryland
Source: Communication: A Social and Career Focus by Berko, Wolvin & Wolvin
Introduction à la Gestion de projets
Cours d'introduction à la Gestion de projets à destination de Master 2 en filière numérique. Au-delà de quelques "règles" et "principes" généraux, la discussion est engagée avec les étudiants qui, du fait de stages en entreprises, ont pu avoir un autre vécu de la gestion de projets. En particulier, la place du chef de projet, du MOA, du MOE, etc., peut varier sensiblement, surtout dans les petites et moyennes entreprises.
Big Digs - Site Development & Underground Solutions for Mining
The document is a presentation about site development and underground solutions for mining given by Armtec Infrastructure Inc. It discusses the use of corrugated structural plate for applications like mine haul roads, portals, and tunnels. It provides details on product types, design considerations, seismic design, construction process, and case studies of installations. The speakers are Doug Leitch and Glenn Smith from Armtec Drainage Solutions.
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaUnit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
More Related Content
Viewers also liked
Internship--programming ideas
This document provides details for planning a youth baseball camp, including potential activities, equipment needs, costs, and staffing requirements. It recommends a variety of low-cost activities that require little to no equipment such as team-building games, yoga, and guest speakers. Sports like archery, frisbee golf, and volleyball are suggested but would require purchasing equipment. The document also outlines counselor duties and qualifications for coaches/trainers. Overall it aims to provide a full week of engaging activities while working within a budget.
K10611 OPC
1) The document discusses quality assurance and control in hospitals, defining quality and outlining the importance of total quality in healthcare.
2) It explores the history and principles of the total quality management (TQM) movement in healthcare and tools used for quality assurance like audits, process management techniques, and quality systems.
3) Continuous quality improvement is important to achieve the highest levels of performance through regular planning, execution, and evaluation cycles.
Best practices in designing a blended learning course
This document outlines best practices for designing a blended learning course. It begins with an introduction to the University of Malaya and discusses the reshaping of education due to globalization and technology. Blended learning combines online and face-to-face learning. The top 10 best practices for course design are then outlined: 1) Focus on learning outcomes over technology, 2) Choose an appropriate instructional model, 3) Balance online and in-person delivery modes, 4) Redefine the teacher's role, 5) Consider optimal class sizes, 6) Support varying technology skills, 7) Balance content development time, 8) Implement effective assessment and feedback, 9) Allow time for teacher professional development, and 10) Engage students.
CONS6817_S03'16
The document discusses various procurement options including:
1) Traditional design-bid-build (DBB), design-build (DB), and novated design-build where the design team is transferred to the contractor.
2) Integrated options like package deal, turnkey, develop and construct, and design-build-leaseback.
3) Management options where the architect's role is separated into project manager, design manager, and design architect to better integrate design and construction.
k11922 opc
The document discusses ERP implementations at several food companies. It describes how Cadbury implemented SAP ERP in 2005 but faced initial problems that led to excess inventory. Similarly, Hershey rushed its ERP implementation in 1999 in 2.5 years instead of the recommended 4 years, which caused order fulfillment issues and a $150 million loss in sales. The key lessons are to avoid squeezing timelines, use a phased approach, thoroughly test systems, and avoid go-lives during busy periods.
Becoming 21st Century Educators
This document discusses the changing role of teachers in the 21st century classroom. It notes that internet technology is reshaping education and the skills needed for the modern workforce. The roles of both students and teachers are evolving - students are more connected and want to create digital content, while teachers must promote technology use, support learner-centered approaches, and help students become global citizens. Overall, the document argues that teachers need to continue learning and embracing new technologies in order to effectively educate students for a digital world.
Chapter 5 Part I: Intrapersonal Communication
Presentation created by Andi Narvaez for COMM 107 - Oral Communication: Principles and Practice
University of Maryland
Source: Communication: A Social and Career Focus by Berko, Wolvin & Wolvin
Introduction à la Gestion de projets
Cours d'introduction à la Gestion de projets à destination de Master 2 en filière numérique. Au-delà de quelques "règles" et "principes" généraux, la discussion est engagée avec les étudiants qui, du fait de stages en entreprises, ont pu avoir un autre vécu de la gestion de projets. En particulier, la place du chef de projet, du MOA, du MOE, etc., peut varier sensiblement, surtout dans les petites et moyennes entreprises.
Big Digs - Site Development & Underground Solutions for Mining
The document is a presentation about site development and underground solutions for mining given by Armtec Infrastructure Inc. It discusses the use of corrugated structural plate for applications like mine haul roads, portals, and tunnels. It provides details on product types, design considerations, seismic design, construction process, and case studies of installations. The speakers are Doug Leitch and Glenn Smith from Armtec Drainage Solutions.
Viewers also liked (14)
Best practices in designing a blended learning course
Best practices in designing a blended learning course
Big Digs - Site Development & Underground Solutions for Mining
Big Digs - Site Development & Underground Solutions for Mining
Recently uploaded
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaUnit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Recently uploaded (20)
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
k10611
- 1. CAREER POINT UNIVERSITY FINAL ASSIGNMENT I C ENGINE AUTOMATIC BOTTEL FILLING SYSTEM SUBMITTED BY: MOHAMMAD SHAHBAZ K10611 B.TECH (ME) 6TH SEM SUBMITTED TO: AMARDEEP SIR ASS. PROF. MECHANICAL DEPT.
- 2. CONTENT TABEL MECHANISM FILLING SECTION CHUTE MECHANISM CAPPING SECTION SENSING MECHANISM CONTROL SECTION