Isosceles Triangles
•Download as PPT, PDF•
1 like•3,946 views
The document provides instructions for creating isosceles triangles from a rectangular piece of paper. It has the following steps: 1. Fold a rectangular piece of paper in half and draw a line from the top of the fold to the bottom right corner, cutting along the line. 2. This creates three triangles, with one line of symmetry. 3. By folding along the line of symmetry, it proves that two of the sides of the triangle are equal, identifying it as an isosceles triangle. 4. The instructions then have the reader create another isosceles triangle from the remaining pieces of the original rectangle.
Report
Share
Report
Share
Recommended
Mathematics: Regular and Irregular Shapes
Use mathematical language to explain the difference between regular and irregular shapes. Regular shapes have sides and angles that are all equal. Irregular shapes have sides and angles of different measures.
Chapter 10 day 1 s.a. of prisms
1. The document discusses geometric concepts related to polyhedrons including prisms. It defines key terms like polyhedron, lateral area, surface area, altitude, net, prism, right prism, and provides formulas to calculate lateral area and surface area of right prisms.
2. Examples are given to identify 3D shapes from their nets and to draw orthographic views of objects. The document also contains classwork on drawing nets and calculating measurements of prisms.
3. Geometric concepts like polyhedrons, prisms, lateral area, surface area, and orthographic views are defined and formulas/examples are provided for calculating measurements and drawing representations of prisms.
Tutorials--Triangle Area and Perimeter
This document provides 40 examples of calculating the area and perimeter of different types of triangles, including scalene, acute, obtuse, isosceles, equilateral, right triangles and specific right triangles defined by their angles or side lengths. The examples show calculations with measures expressed as both numbers and variables.
4b area of polygons
This document discusses formulas and strategies for computing the perimeter and area of basic shapes like triangles, parallelograms, trapezoids, and circles. It provides the formulas for finding the perimeter of squares, rectangles, and other polygons by adding the side lengths. Formulas are also given for finding the area of triangles, parallelograms, squares, rectangles, trapezoids, circles, and more complex irregular shapes by decomposing them into basic components. Examples are worked through on various pages and homework is assigned covering the material.
002 s.a. of prisms
This document discusses how to find the lateral area and surface area of a polyhedron called a prism. It defines key terms like polyhedron, altitude, lateral area, and net. It then explains that the lateral area of a right prism can be found using the formula LA = Hp, where H is the height and p is the perimeter of the base. The surface area of a right prism can be found using the formula SA = LA + 2B, where LA is the lateral area and B is the area of one base. Examples are provided to demonstrate calculating the lateral area and surface area of a right prism with a regular hexagonal base.
Similar triangles student_handout
The document provides instructions for an activity where students work in groups to cut out triangles from shapes. They sort and group the triangles based on similar characteristics and compare corresponding angles and sides. Students then measure and record side lengths and angle measurements of triangles within each group. They are tasked with labeling additional similar triangles without tools based on given scale factors between pairs of triangles. The purpose is for students to observe properties of similar figures and learn related vocabulary terms like similar figures, corresponding angles and sides, and scale factor.
Geometry Terms - 5th Grade
This document defines and describes basic geometry terms including points, lines, line segments, rays, planes, angles, and the relationships between lines such as intersecting, parallel, and perpendicular lines. Points mark exact locations, lines have no endpoints, line segments connect two endpoints, rays have one endpoint and extend in one direction, planes are flat endless surfaces, and angles are formed by two rays with a shared endpoint which can be acute, obtuse, right, or straight.
Mathematics: Solids Lesson
This document discusses geometric shapes, specifically comparing and classifying solid shapes according to their dimensions and properties. It explains that solid shapes are three-dimensional objects that can be described by their width, depth, and height. The key properties of solid shapes discussed are their volume, surface area, and the number of vertices, faces, and edges they have. Specific solid shapes are also discussed like cubes, cones, cuboids, spheres, pyramids and prisms along with their nets.
Recommended
Mathematics: Regular and Irregular Shapes
Use mathematical language to explain the difference between regular and irregular shapes. Regular shapes have sides and angles that are all equal. Irregular shapes have sides and angles of different measures.
Chapter 10 day 1 s.a. of prisms
1. The document discusses geometric concepts related to polyhedrons including prisms. It defines key terms like polyhedron, lateral area, surface area, altitude, net, prism, right prism, and provides formulas to calculate lateral area and surface area of right prisms.
2. Examples are given to identify 3D shapes from their nets and to draw orthographic views of objects. The document also contains classwork on drawing nets and calculating measurements of prisms.
3. Geometric concepts like polyhedrons, prisms, lateral area, surface area, and orthographic views are defined and formulas/examples are provided for calculating measurements and drawing representations of prisms.
Tutorials--Triangle Area and Perimeter
This document provides 40 examples of calculating the area and perimeter of different types of triangles, including scalene, acute, obtuse, isosceles, equilateral, right triangles and specific right triangles defined by their angles or side lengths. The examples show calculations with measures expressed as both numbers and variables.
4b area of polygons
This document discusses formulas and strategies for computing the perimeter and area of basic shapes like triangles, parallelograms, trapezoids, and circles. It provides the formulas for finding the perimeter of squares, rectangles, and other polygons by adding the side lengths. Formulas are also given for finding the area of triangles, parallelograms, squares, rectangles, trapezoids, circles, and more complex irregular shapes by decomposing them into basic components. Examples are worked through on various pages and homework is assigned covering the material.
002 s.a. of prisms
This document discusses how to find the lateral area and surface area of a polyhedron called a prism. It defines key terms like polyhedron, altitude, lateral area, and net. It then explains that the lateral area of a right prism can be found using the formula LA = Hp, where H is the height and p is the perimeter of the base. The surface area of a right prism can be found using the formula SA = LA + 2B, where LA is the lateral area and B is the area of one base. Examples are provided to demonstrate calculating the lateral area and surface area of a right prism with a regular hexagonal base.
Similar triangles student_handout
The document provides instructions for an activity where students work in groups to cut out triangles from shapes. They sort and group the triangles based on similar characteristics and compare corresponding angles and sides. Students then measure and record side lengths and angle measurements of triangles within each group. They are tasked with labeling additional similar triangles without tools based on given scale factors between pairs of triangles. The purpose is for students to observe properties of similar figures and learn related vocabulary terms like similar figures, corresponding angles and sides, and scale factor.
Geometry Terms - 5th Grade
This document defines and describes basic geometry terms including points, lines, line segments, rays, planes, angles, and the relationships between lines such as intersecting, parallel, and perpendicular lines. Points mark exact locations, lines have no endpoints, line segments connect two endpoints, rays have one endpoint and extend in one direction, planes are flat endless surfaces, and angles are formed by two rays with a shared endpoint which can be acute, obtuse, right, or straight.
Mathematics: Solids Lesson
This document discusses geometric shapes, specifically comparing and classifying solid shapes according to their dimensions and properties. It explains that solid shapes are three-dimensional objects that can be described by their width, depth, and height. The key properties of solid shapes discussed are their volume, surface area, and the number of vertices, faces, and edges they have. Specific solid shapes are also discussed like cubes, cones, cuboids, spheres, pyramids and prisms along with their nets.
Mathematics: Perimeter and Area Lesson
This document provides information about polygons, perimeter, and area. It defines a polygon as a 2D shape with straight sides. There are two types of polygons: regular and irregular. Perimeter is defined as the distance around a 2D shape and is measured by adding up the lengths of all sides. Area is the amount of surface a shape covers and is measured in square units. Formulas are provided to calculate the perimeter and area of common polygons like squares, rectangles, and triangles. Examples are given to demonstrate calculating perimeter and area using the appropriate formulas and units of measurement.
Welcome To Geometry
This document introduces key concepts in geometry, including points, lines, planes, angles, polygons, triangles, quadrilaterals, and different types of geometric shapes. It defines important vocabulary like parallel lines, intersecting lines, perpendicular lines, acute angles, right angles, and obtuse angles. It also explains how to classify triangles based on angle types (right, acute, obtuse) and side lengths (scalene, isosceles, equilateral). Similarly, it describes how to classify quadrilaterals such as parallelograms, rectangles, rhombi, squares, and trapezoids based on their properties.
Geometry In The Real World
This power point is a project for Mrs. Sykes, by Canute Jacobsen. The power point itself is about how geometry is involved in the world.
Triangle
Triangles have three sides and three interior angles. They can be classified based on side length as equilateral (all sides equal), isosceles (two sides equal), or scalene (all sides unequal). Triangles can also be classified based on angle measures as acute (all angles less than 90 degrees), right (one angle of 90 degrees), or obtuse (one angle greater than 90 degrees). The Pythagorean theorem can be used to calculate the length of the hypotenuse (longest side) of a right triangle given the lengths of the other two sides. The area of any triangle can be calculated by multiplying the base by the height.
Plane Geometry
This document provides an overview of key concepts in plane geometry covered in Chapter 5, including points, lines, planes, angles, parallel and perpendicular lines, triangles, polygons, coordinate geometry, congruence, transformations, and tessellations. Specific topics discussed include classifying angles, properties of parallel lines cut by a transversal, the triangle sum theorem, types of triangles and polygons, finding total angle measures of polygons, and using coordinate geometry. Homework problems are provided at the end of sections for additional practice.
Geometry Project John Hoang Block 1
This document defines and describes basic geometric shapes and terms including points, lines, planes, angles, triangles, quadrilaterals, circles, cylinders, spheres, and other shapes. It provides the formal definitions for these fundamental concepts in geometry. Key terms are defined such as a point having no size, a line being infinite in length, a plane being a flat surface that extends without thickness, and polygons being shapes with a specific number of sides.
Math
This document provides an overview of elementary shapes in math. It begins by explaining that all shapes are formed using lines and curves and can be organized into categories like lines, angles, and polygons. It then discusses how to measure and compare line segments using observations, tracing, and a ruler. Different types of angles are defined. Two-dimensional shapes like polygons, quadrilaterals, circles and triangles are described. Three-dimensional shapes such as cubes, cuboids, spheres and hemispheres are also defined along with their key features like faces, edges and vertices.
Geometry Power Point 5th grade
Geometry is the branch of mathematics that measures and compares points, lines, angles, surfaces, and solids. It defines basic shapes such as points, lines, rays, angles, and planes. It also covers types of angles and intersections between lines. Additionally, it categorizes polygons by number of sides and characteristics. Key concepts include perimeter, area, symmetry, and three-dimensional solids. The document provides definitions and examples of basic geometric elements, shapes, their properties, and how to measure them.
Equal triangles
1) The document discusses different ways to determine if two triangles are equal based on their side lengths and angles.
2) It establishes three general principles: if two triangles have (a) equal sides, (b) two equal sides and the angle between them, or (c) one equal side and equal angles at the ends, then their other properties (sides or angles) are also equal.
3) Examples are given to illustrate each principle and exceptions are noted where equality does not imply full equality.
basic geometrical ideas
This document provides an overview of basic geometric concepts taught in a 6th grade mathematics class. It defines key terms like point, line, line segment, ray, angle, polygons, triangles, quadrilaterals, and circles. The lesson is taught by two teachers, Pooja Bindal and Shalu Verma, aims to help students understand properties of quadrilaterals and distinguish between different types of quadrilaterals and polygons. The document explains concepts like vertices, sides, adjacent sides, opposite sides, radii, diameters, chords, sectors, and segments of circles. The intended learning outcome is for students to understand the definitions of basic geometric shapes and apply their knowledge in different situations.
Fundamental Geometrical Concepts Class 7
I made this presentation for my school project after that I thought that I should upload it on any slide so I uploaded this to help others in making presentations and getting ideas.It is a class 7 project.
Drawing some kinds of line in triangle
There are four types of lines that can be drawn in a triangle:
1. A perpendicular bisector of a side bisects the side at a 90 degree angle.
2. An angle bisector bisects the interior angle of the triangle into two equal angles.
3. A height or altitude drops perpendicular from a vertex to the opposite side.
4. A median connects a vertex to the midpoint of the opposite side.
Geometry In The Real World
The document provides examples of various geometric shapes found in architecture around the world and defines each shape. It begins by using the Capital Building to represent a point and the Empire State Building to represent a line segment. It then discusses planes, angles, perpendicular and parallel lines using various buildings as examples. The summary concludes with triangles, right triangles, polygons up to hexagons, and three-dimensional shapes including cubes, cylinders, spheres, and polyhedrons being represented by different architectural structures.
Modern Geometry Topics
This powerpoint includes:
Triangles and Quadrangles
Definition, Types, Properties, Secondary part, Congruency and Area
Definitions of Triangles and Quadrangles
Desarguesian Plane
Mathematician Desargues and His Background
Harmonic Sequence of Points/Lines
Illustrations and Animated Lines.
Angles and shapes
This document introduces geometry concepts across three units: angles, triangles, and quadrilaterals. Unit 1 defines different types of angles such as acute, obtuse, right, and straight angles. Unit 2 covers right, acute, and obtuse triangles defined by their angle measures. Unit 3 defines quadrilaterals such as parallelograms, rectangles, squares, rhombuses, and trapezoids based on their side lengths and angles. Each unit includes examples to identify shapes and quick self-check questions to test understanding.
similar triangles
1) Triangles are three-sided polygons formed by three line segments. The sum of the three interior angles is always 180 degrees.
2) There are certain properties that apply to all triangles, such as being rigid flat shapes that satisfy the Triangle Inequality.
3) Triangles can be categorized based on their sides and angles. Congruent triangles are identical in shape and size, while similar triangles have the same shape but may differ in size. The properties of similar triangles can be used to solve proportional relationships.
Exploring the Pythagorean Relationship
The document explores the Pythagorean relationship through an activity with cut-out squares that form three triangles. Students are asked to measure the sides and angles of the triangles, record the data in a table, and identify which triangles are right triangles based on having a 90 degree angle. For right triangles, students state the relationship between the areas of the squares and describe the relationship between the side lengths as being the Pythagorean relationship, where the area of the hypotenuse square equals the sum of the areas of the other two squares.
Geometry unit 1.1.pptx
This document discusses different ways to represent three-dimensional objects using two-dimensional drawings. It introduces nets, which are 2D diagrams that can be folded to form a 3D object. Isometric drawings show a 3D object from a corner view, allowing you to see the top, front and side simultaneously. Orthographic drawings show separate top, front and side views. The document uses examples and problems to illustrate these concepts and techniques for visualizing and analyzing 3D shapes.
Isosceles triangles (1)
The document provides instructions for making isosceles triangles from a rectangular piece of paper. By folding the paper in half and cutting along a line from the top of the fold to the bottom corner, it creates three triangles, one of which has two equal sides, identifying it as an isosceles triangle. The instructions emphasize proving the two sides are equal using folding and symmetry.
Symmetry
Symmetry is discussed in the document, including line symmetry and mirror reflection. Line symmetry occurs when a figure can be folded along a line so that the two halves are identical mirror images. Mirror reflection produces identical images that are left-right reversals. Figures can have no lines of symmetry, one line, two lines, or multiple lines depending on their shape. Symmetry is important in areas like art, architecture, and design as it produces pleasing proportional balances.
Making Trihexaflexagons
This document provides instructions for creating a trihexaflexagon, a paper model that can be flexed to reveal different faces. It explains how to mark and cut a sheet of paper to form the necessary shapes and labels. Detailed steps are given for folding the paper according to the markings to form a hexagonal shape. Additional instructions describe how to flex the completed model by folding edges together to reveal different triangle combinations on each face.
01 triangle new
1) The document discusses congruent figures and triangles. It defines congruent figures as those with the same shape and size that can be placed directly on top of each other.
2) It explains that triangles are congruent if their three sides or three angles are equal, or if one side and the two angles adjacent to it are equal.
3) It provides examples of congruent and non-congruent triangles based on different combinations of equal sides and angles.
More Related Content
What's hot
Mathematics: Perimeter and Area Lesson
This document provides information about polygons, perimeter, and area. It defines a polygon as a 2D shape with straight sides. There are two types of polygons: regular and irregular. Perimeter is defined as the distance around a 2D shape and is measured by adding up the lengths of all sides. Area is the amount of surface a shape covers and is measured in square units. Formulas are provided to calculate the perimeter and area of common polygons like squares, rectangles, and triangles. Examples are given to demonstrate calculating perimeter and area using the appropriate formulas and units of measurement.
Welcome To Geometry
This document introduces key concepts in geometry, including points, lines, planes, angles, polygons, triangles, quadrilaterals, and different types of geometric shapes. It defines important vocabulary like parallel lines, intersecting lines, perpendicular lines, acute angles, right angles, and obtuse angles. It also explains how to classify triangles based on angle types (right, acute, obtuse) and side lengths (scalene, isosceles, equilateral). Similarly, it describes how to classify quadrilaterals such as parallelograms, rectangles, rhombi, squares, and trapezoids based on their properties.
Geometry In The Real World
This power point is a project for Mrs. Sykes, by Canute Jacobsen. The power point itself is about how geometry is involved in the world.
Triangle
Triangles have three sides and three interior angles. They can be classified based on side length as equilateral (all sides equal), isosceles (two sides equal), or scalene (all sides unequal). Triangles can also be classified based on angle measures as acute (all angles less than 90 degrees), right (one angle of 90 degrees), or obtuse (one angle greater than 90 degrees). The Pythagorean theorem can be used to calculate the length of the hypotenuse (longest side) of a right triangle given the lengths of the other two sides. The area of any triangle can be calculated by multiplying the base by the height.
Plane Geometry
This document provides an overview of key concepts in plane geometry covered in Chapter 5, including points, lines, planes, angles, parallel and perpendicular lines, triangles, polygons, coordinate geometry, congruence, transformations, and tessellations. Specific topics discussed include classifying angles, properties of parallel lines cut by a transversal, the triangle sum theorem, types of triangles and polygons, finding total angle measures of polygons, and using coordinate geometry. Homework problems are provided at the end of sections for additional practice.
Geometry Project John Hoang Block 1
This document defines and describes basic geometric shapes and terms including points, lines, planes, angles, triangles, quadrilaterals, circles, cylinders, spheres, and other shapes. It provides the formal definitions for these fundamental concepts in geometry. Key terms are defined such as a point having no size, a line being infinite in length, a plane being a flat surface that extends without thickness, and polygons being shapes with a specific number of sides.
Math
This document provides an overview of elementary shapes in math. It begins by explaining that all shapes are formed using lines and curves and can be organized into categories like lines, angles, and polygons. It then discusses how to measure and compare line segments using observations, tracing, and a ruler. Different types of angles are defined. Two-dimensional shapes like polygons, quadrilaterals, circles and triangles are described. Three-dimensional shapes such as cubes, cuboids, spheres and hemispheres are also defined along with their key features like faces, edges and vertices.
Geometry Power Point 5th grade
Geometry is the branch of mathematics that measures and compares points, lines, angles, surfaces, and solids. It defines basic shapes such as points, lines, rays, angles, and planes. It also covers types of angles and intersections between lines. Additionally, it categorizes polygons by number of sides and characteristics. Key concepts include perimeter, area, symmetry, and three-dimensional solids. The document provides definitions and examples of basic geometric elements, shapes, their properties, and how to measure them.
Equal triangles
1) The document discusses different ways to determine if two triangles are equal based on their side lengths and angles.
2) It establishes three general principles: if two triangles have (a) equal sides, (b) two equal sides and the angle between them, or (c) one equal side and equal angles at the ends, then their other properties (sides or angles) are also equal.
3) Examples are given to illustrate each principle and exceptions are noted where equality does not imply full equality.
basic geometrical ideas
This document provides an overview of basic geometric concepts taught in a 6th grade mathematics class. It defines key terms like point, line, line segment, ray, angle, polygons, triangles, quadrilaterals, and circles. The lesson is taught by two teachers, Pooja Bindal and Shalu Verma, aims to help students understand properties of quadrilaterals and distinguish between different types of quadrilaterals and polygons. The document explains concepts like vertices, sides, adjacent sides, opposite sides, radii, diameters, chords, sectors, and segments of circles. The intended learning outcome is for students to understand the definitions of basic geometric shapes and apply their knowledge in different situations.
Fundamental Geometrical Concepts Class 7
I made this presentation for my school project after that I thought that I should upload it on any slide so I uploaded this to help others in making presentations and getting ideas.It is a class 7 project.
Drawing some kinds of line in triangle
There are four types of lines that can be drawn in a triangle:
1. A perpendicular bisector of a side bisects the side at a 90 degree angle.
2. An angle bisector bisects the interior angle of the triangle into two equal angles.
3. A height or altitude drops perpendicular from a vertex to the opposite side.
4. A median connects a vertex to the midpoint of the opposite side.
Geometry In The Real World
The document provides examples of various geometric shapes found in architecture around the world and defines each shape. It begins by using the Capital Building to represent a point and the Empire State Building to represent a line segment. It then discusses planes, angles, perpendicular and parallel lines using various buildings as examples. The summary concludes with triangles, right triangles, polygons up to hexagons, and three-dimensional shapes including cubes, cylinders, spheres, and polyhedrons being represented by different architectural structures.
Modern Geometry Topics
This powerpoint includes:
Triangles and Quadrangles
Definition, Types, Properties, Secondary part, Congruency and Area
Definitions of Triangles and Quadrangles
Desarguesian Plane
Mathematician Desargues and His Background
Harmonic Sequence of Points/Lines
Illustrations and Animated Lines.
Angles and shapes
This document introduces geometry concepts across three units: angles, triangles, and quadrilaterals. Unit 1 defines different types of angles such as acute, obtuse, right, and straight angles. Unit 2 covers right, acute, and obtuse triangles defined by their angle measures. Unit 3 defines quadrilaterals such as parallelograms, rectangles, squares, rhombuses, and trapezoids based on their side lengths and angles. Each unit includes examples to identify shapes and quick self-check questions to test understanding.
similar triangles
1) Triangles are three-sided polygons formed by three line segments. The sum of the three interior angles is always 180 degrees.
2) There are certain properties that apply to all triangles, such as being rigid flat shapes that satisfy the Triangle Inequality.
3) Triangles can be categorized based on their sides and angles. Congruent triangles are identical in shape and size, while similar triangles have the same shape but may differ in size. The properties of similar triangles can be used to solve proportional relationships.
Exploring the Pythagorean Relationship
The document explores the Pythagorean relationship through an activity with cut-out squares that form three triangles. Students are asked to measure the sides and angles of the triangles, record the data in a table, and identify which triangles are right triangles based on having a 90 degree angle. For right triangles, students state the relationship between the areas of the squares and describe the relationship between the side lengths as being the Pythagorean relationship, where the area of the hypotenuse square equals the sum of the areas of the other two squares.
Geometry unit 1.1.pptx
This document discusses different ways to represent three-dimensional objects using two-dimensional drawings. It introduces nets, which are 2D diagrams that can be folded to form a 3D object. Isometric drawings show a 3D object from a corner view, allowing you to see the top, front and side simultaneously. Orthographic drawings show separate top, front and side views. The document uses examples and problems to illustrate these concepts and techniques for visualizing and analyzing 3D shapes.
What's hot (18)
Similar to Isosceles Triangles
Isosceles triangles (1)
The document provides instructions for making isosceles triangles from a rectangular piece of paper. By folding the paper in half and cutting along a line from the top of the fold to the bottom corner, it creates three triangles, one of which has two equal sides, identifying it as an isosceles triangle. The instructions emphasize proving the two sides are equal using folding and symmetry.
Symmetry
Symmetry is discussed in the document, including line symmetry and mirror reflection. Line symmetry occurs when a figure can be folded along a line so that the two halves are identical mirror images. Mirror reflection produces identical images that are left-right reversals. Figures can have no lines of symmetry, one line, two lines, or multiple lines depending on their shape. Symmetry is important in areas like art, architecture, and design as it produces pleasing proportional balances.
Making Trihexaflexagons
This document provides instructions for creating a trihexaflexagon, a paper model that can be flexed to reveal different faces. It explains how to mark and cut a sheet of paper to form the necessary shapes and labels. Detailed steps are given for folding the paper according to the markings to form a hexagonal shape. Additional instructions describe how to flex the completed model by folding edges together to reveal different triangle combinations on each face.
01 triangle new
1) The document discusses congruent figures and triangles. It defines congruent figures as those with the same shape and size that can be placed directly on top of each other.
2) It explains that triangles are congruent if their three sides or three angles are equal, or if one side and the two angles adjacent to it are equal.
3) It provides examples of congruent and non-congruent triangles based on different combinations of equal sides and angles.
Modulepolygons
This document provides information about polygons, including defining polygons, recognizing different types of polygons, naming polygons based on the number of sides, and determining key properties such as the number of sides, vertices, and diagonals. It also discusses sketching polygons, identifying lines of symmetry, and the geometric properties of specific polygons like triangles and quadrilaterals. Examples are provided for drawing triangles and quadrilaterals given specific measurements. Key terms are defined in a glossary at the end.
Special quadtilaterals parallelograms
The document summarizes properties of different quadrilaterals and triangles. It defines a parallelogram as a quadrilateral with two sets of opposite parallel sides. Some key properties listed are that opposite angles of a parallelogram are congruent, consecutive angles are supplementary, opposite sides are congruent, and the diagonals bisect each other. A construction method for drawing a parallelogram using parallel lines is also provided.
Special quadtilaterals parallelograms
The document summarizes properties of different shapes including kites, trapezoids, triangles, and parallelograms. It states that the diagonals of a kite are perpendicular and one diagonal bisects the other. It also notes that opposite angles and sides of a parallelogram are congruent, and the diagonals of a parallelogram bisect each other. Finally, it provides classwork and homework assignments related to special quadrilaterals.
COT-1-QUADRILATERALS THAT ARE PARALLELOGRAM.pptx
1) The document describes a 9th grade mathematics classroom observation on geometry and properties of parallelograms. Students were asked to measure sides and angles of a drawn parallelogram and record their findings.
2) Key properties of parallelograms are reviewed, including opposite sides being congruent and parallel, opposite angles being congruent, and diagonals bisecting each other.
3) For a learning task, students are instructed to draw and measure a parallelogram, then make conjectures about measurements and properties.
L4 polygons and_quadrilaterals by unknown
This document provides information about geometry drawing tools and different types of polygons and quadrilaterals. It includes definitions and examples of polygons, types of quadrilaterals, and methods for drawing geometric shapes both freehand and using tools. The document also contains examples of drawing shapes that meet certain criteria and describing shapes based on their properties.
Visualizing solid shapes
It an interesting ppt from with a child can understand the concept of solid shape and different views of a solid shapes from different sides .
thank you
Geometry unit 11.1
This document discusses classifying and analyzing three-dimensional geometric shapes. It defines key terms like face, edge, and vertex used to describe three-dimensional shapes. Examples are provided to demonstrate classifying shapes based on these properties, identifying shapes from nets, and describing cross sections. The document also provides examples applying these concepts to cutting cheese into different shapes depending on how it is sliced. Overall, the document covers classifying, analyzing, and describing three-dimensional shapes.
Math 3.4
The document discusses symmetry in shapes. It defines line symmetry as a line that divides a shape into two mirror image halves. Rotational symmetry is when a shape remains the same after being rotated less than 360 degrees around a fixed point. Students will create shapes with different types of symmetry - rotational, linear, and no symmetry - and identify the number of possible rotations for shapes with rotational symmetry.
Cross sections of 3 d figures
Cross sections are 2D shapes that result when a 3D figure is cut by a plane. The plane can be parallel or perpendicular to the base of the 3D figure. A horizontal cross section of a cone is a circle, while a vertical cross section is a triangle. Both the horizontal and vertical cross sections of a cylinder are circles and rectangles, respectively.
Tecnical drawing & polygonal shapes
The document defines and describes various polygons shapes such as triangles, quadrilaterals, trapezoids, and provides examples. It defines triangles as shapes with three straight lines and three vertices whose interior angles sum to 180 degrees. Quadrilaterals are defined as shapes with four straight sides and four angles that sum to 360 degrees. Important lines of triangles like heights, midpoints, and midpoints of segments are defined. Trapezoids are described as quadrilaterals where none of the sides are equal or parallel. Pictures of shapes made of triangles and squares are provided as examples.
Triangles
Triangles have three non-collinear points called vertices and three segments connecting them called sides. A triangle is named by listing its three vertices, usually in clockwise order. Triangles are classified based on sides as equilateral, isosceles, or scalene and based on angles as acute, right, obtuse, or equiangular. The sum of the interior angles of any triangle is always 180 degrees. Exterior angles of a triangle are supplementary to their adjacent interior angles.
7.4 Similarity in right triangles
This document discusses similar right triangles and the geometric mean. It contains examples and theorems about how cutting an altitude to the hypotenuse of a right triangle divides it into two similar right triangles. The geometric mean of two numbers a and b is the positive number x that satisfies ab=x^2. Using the geometric mean and properties of similar triangles, missing side lengths can be calculated.
300017-DumalnegNHS-Raval, Cyrah Mae.ppt
This document discusses properties of quadrilaterals including parallelograms, rectangles, rhombuses, and squares. It provides definitions and key properties of each shape. Students are instructed to create a foldable study guide defining and comparing the different quadrilaterals. They will draw examples of each and list their distinguishing properties. The document aims to help students learn the different theorems and identify the characteristics that define special types of parallelograms.
Class 4 presentation posted
Here are the steps to draw an equilateral triangle using the diameters method:
1. Draw a circle of any convenient size.
2. Draw two diameters of the circle that intersect at right angles. These will form the bases of the triangle.
3. With the points where the diameters intersect the circle as centers, and using the radius of the circle as the radius, draw arcs above the diameters.
4. The point where the arcs intersect will be the third vertex of the equilateral triangle.
5. Connect this point to the two base points to complete the equilateral triangle.
The key steps are using the diameters of the circle as the bases, and the fact that arcs drawn with the same
MATH 4 PPT Q3 W3-W4 - Lesson 51 - Polygons.pptx
This document provides instructions for a lesson on classifying triangles based on their angles and sides. The lesson involves students drawing and classifying different types of triangles, answering questions to test their understanding of triangle types, and drawing triangles with specified measurements. The lesson helps students learn that triangles can be classified as right, acute, or obtuse based on their angles, and as equilateral, isosceles, or scalene based on their sides.
Similar to Isosceles Triangles (20)
More from guestda4150
Parts of speech information
The document summarizes the eight parts of speech in English grammar: nouns, pronouns, verbs, adjectives, adverbs, prepositions, conjunctions, and interjections. It provides examples and definitions for each part of speech, describing what kind of word it is and how it functions in a sentence.
Mean Median Mode Range
The document defines and provides examples of calculating mean, median, mode, and range from a dataset of class shoe sizes. It explains that the mean is calculated by adding all the numbers and dividing by the total, the median is the middle number when values are ordered, the mode is the most frequent number, and the range is the difference between the highest and lowest values. The mean shoe size was 4, the median was 4.5, the mode was 5, and the range was 5.
Mean Median Mode Range
The document defines and provides examples of calculating mean, median, mode, and range from a dataset of class shoe sizes. It explains that the mean is calculated by adding all the numbers and dividing by the total, the median is the middle number when values are ordered, the mode is the most frequent number, and the range is the difference between the highest and lowest values.
Energy
Potential energy is stored energy that an object has due to its position or chemical composition, while kinetic energy is the energy of motion. A roller coaster car has kinetic energy as it moves down the track, and potential energy as it slows to a stop at the top of a hill where it is positioned to move downward. Substances like wood, coal, oil and gasoline have potential chemical energy that can be released as heat energy through burning. Potential energy can be converted to kinetic energy and vice versa.
La Perseverancia
La perseverancia es necesaria para triunfar en la vida. Realiza una tarea cada día sin importar las dificultades, ya que es en las adversidades donde se forja el carácter. No te conformes con triunfos fáciles, sino que busca oportunidades valiosas y distínguete por tu perseverancia repitiendo "¡Yo he de vencer!".
Spelling Bee 5th Grade
This document contains a spelling bee word list for 5th grade students at Colegio San Patricio for the 2009-2010 school year. The list includes 177 words for students to study and be tested on, ranging from short common words like "method" and "tissue" to more advanced words like "territory", "inspiration", and "equation".
More from guestda4150 (6)
Recently uploaded
HYPERTENSION - SLIDE SHARE PRESENTATION.
IT WILL BE HELPFULL FOR THE NUSING STUDENTS
IT FOCUSED ON MEDICAL MANAGEMENT AND NURSING MANAGEMENT.
HIGHLIGHTS ON HEALTH EDUCATION.
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"National Information Standards Organization (NISO)
This presentation was provided by Racquel Jemison, Ph.D., Christina MacLaughlin, Ph.D., and Paulomi Majumder. Ph.D., all of the American Chemical Society, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
How to Fix [Errno 98] address already in use
This slide will represent the cause of the error “[Errno 98] address already in use” and the troubleshooting steps to resolve this error in Odoo.
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...Nguyen Thanh Tu Collection
https://app.box.com/s/nrwz52lilmrw6m5kqeqn83q6vbdp8yzpAccounting for Restricted Grants When and How To Record Properly
In this webinar, member learned how to stay in compliance with generally accepted accounting principles (GAAP) for restricted grants.
How to Predict Vendor Bill Product in Odoo 17
This slide will guide us through the process of predicting vendor bill products based on previous purchases from the vendor in Odoo 17.
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
Slides from a Capitol Technology University webinar held June 20, 2024. The webinar featured Dr. Donovan Wright, presenting on the Department of Defense Digital Transformation.
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
NIPER JEE PYQ
NIPER JEE QUESTIONS
MOST FREQUENTLY ASK QUESTIONS
NIPER MEMORY BASED QUWSTIONS
Benner "Expanding Pathways to Publishing Careers"
This presentation was provided by Rebecca Benner, Ph.D., of the American Society of Anesthesiologists, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
Bossa N’ Roll Records by Ismael Vazquez.
Bossa N Roll Records presentation by Izzy Vazquez for Music Retail and Distribution class at Full Sail University
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
Recently uploaded (20)
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
SWOT analysis in the project Keeping the Memory @live.pptx
SWOT analysis in the project Keeping the Memory @live.pptx
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
Accounting for Restricted Grants When and How To Record Properly
Accounting for Restricted Grants When and How To Record Properly
Juneteenth Freedom Day 2024 David Douglas School District
Juneteenth Freedom Day 2024 David Douglas School District
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
Isosceles Triangles
- 1. Triangles
- 2. Take a rectangular piece of paper.
- 3. Take a rectangular piece of paper. Fold it in half
- 4. Take a rectangular piece of paper. Fold it in half Use a ruler to draw a line from the top of the fold to the bottom right hand corner.
- 5. Take a rectangular piece of paper. Fold it in half Use a ruler to draw a line from the top of the fold to the bottom right hand corner. Cut along the line.
- 6. You should now have 3 triangles
- 7. Can you prove that this is a line of symmetry?
- 8. Does this triangle have any other line of symmetry?
- 9. No it doesn’t. It only has the one.
- 10. How can we prove that line ac is equal to line bc? a b c d By folding along the line of symmetry . If you haven’t tried it, do it now.
- 11. a b c d b This type of triangle, where two sides are equal, has a special name. It is called an ISOSCELES triangle
- 12. a b c d b Stick this triangle into your jotter and name it ISOSCELES triangle. Now use the other two pieces of the rectangle to make another isosceles triangle.
- 13. Your new triangle should look like this. How do we know it is isoscles?
- 14. Which of these triangles do you think is isosceles?
- 15. These are the isosceles triangles. Write in your jotter how we can describe an isosceles triangle and how we can prove it is isosceles.