IGS-20040MT is a fully-managed Gigabit fiber switch usually designed for the industrial network. It features 16 10/100/1000BASE-T copper ports, 4 100/1000BASE-X SFP ports and redundant power system in an IP30 rugged but compact-sized case that can be installed in any difficult environment without space limitation. It provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions and Layer 3 static routing capability. The IGS-20040MT can operate stably under the temperature range from -40 to 75 degrees C and allows either DIN-rail or wall mounting for efficient use of cabinet space. With 4 dual-speed SFP fiber slots, it can be flexibly applied to extend the connection distance.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://www.bbcpl.in
6. 6 / 45
New Phase-in
Available
L2+
w/Ring
IGS-5225
series
L2
/
L4
IGS-4215
series
L3
w/Ring
IGS-6325
series
Full Gigabit Gigabit + 10G
1588
PTP
TC
ERPS
Ring
L3
OSPF
Routing
Modbus
TCP
1588
PTP
TC
ERPS
Ring
L3
Static
Routing
Modbus
TCP
IGS-801M(v2)
8 x 10/100/1000T
DC 12~48V; AC 24V
IGS-5225-8T2S2X
8 x 10/100/1000T
2 x 100/1000X SFP
2 x 10G SFP+
2 DI + 2 DO
DC 12~48V; AC 24V
IGS-10020MT
8 x 10/100/1000T
2 x 100/1000X SFP
DC 12~48V; AC 24V
IGS-5225-4T2S
4 x 10/100/1000T
2 x 100/1000X SFP
DC 12~48V; AC 24V
IGS-10080MFT
2 x 10/100/1000T
8 x 100/1000X SFP
DC 12~48V; AC 24V
IGS-12040MT
8 x 10/100/1000T
4 x 100/1000X SFP
2 DI + 2 DO
DC 12~72V; AC 24V
IGS-20040MT
16 x 10/100/1000T
4 x 100/1000X SFP
2 DI + 2 DO
DC 9~48V; AC 24V
IGS-6325-8T8S
8 x 10/100/1000T
8 x 100/1000X SFP
2 DI + 2 DO
DC 12~48V; AC 24V
IGS-6325-8T8S4X
8 x 10/100/1000T
8 x 100/100X SFP
4 x 10G SFP+
2 DI + 2 DO
DC 12~48V; AC 24V
IGS-4215-16T2S
16 x 10/100/1000T
2 x 100/1000X SFP
DC 12~48V; AC 24V
IGS-6325-8T4X
8 x 10/100/1000T
4 x 10G SFP+
2 DI + 2 DO
DC 12~48V; AC 24V
Product Overview: DIN-rail Managed Switches
IGS-6325-16T4S
16 x 10/100/1000T
4 x 100/1000X SFP
2 DI + 2 DO
DC 9~48V; AC 24V
8. 8 / 45
Product Overview
Front Panel of IGS-20040MT
2 6-pin Removable Terminal Block /
Redundant 9~48V DC Power Input,
24V AC Power Input
Digital Input and Digital Output
1
1 x RS232 Console Port
5
16 x 10/100/1000BASE-T
Ethernet Port
6
Reset Button
3 Power 1, Power 2, Fault, Ring
& Ring Owner LEDs
4
4 x 100/1000X SFP Slot
7
IP30 Aluminum Case
8
9. Product Overview
Top View of IGS-20040MT
B Pin Removable Terminal Block /
Redundant 9~48V DC Power Input
A Pin Removable Terminal Block /
Digital Input / Digital Output Interface
1 Digital Input Pin
2 Digital Output Pin
3 DI/DO Grounding Pin
4 9~48V DC/24V AC Power 2 Input Pin
5 Fault Alarm Pin
6 9~48V DC/24V AC Power 1 Input Pin
7 Case Grounding
9 / 45
13. 13 / 45
Industrial Conformance
The smallest 20-port Gigabit Managed Switch in the industrial
networking industry
9~48V DC, 24V AC redundant power
-40 to 75 degrees C operating temperature
IP30 aluminum case
Cost-effective IPv6 Industrial Backbone Switch
40Gbps high-performance switching fabric
IPv4/IPv6 Dual Stack helps to connect to IPv6 network now and in the
future
Full/Secure Management
SSHv2, TLS 1.2 and SNMPv3 protocols ensure security management
SNMP, RMON and Trap alarm for Centralized Network Management
Product Benefits
15. 15 / 45
Key Features
20-Port
Gigabit
Modbus
TCP/IP
1588
PTPv2
100/1000X
SFP
G.8032
ERPS Ring
IPv4/IPv6
Management
Cybersecurity
Management
Layer 3
Static Routing
9~48V DC
or 24V AC
Input
IGS-20040MT
16. 16 / 45
Product Features
Hardware
16 10/100/1000BASE-T RJ45 ports, auto MDI/MDIX
4 SFP slots, flexible for Fiber Optic network extension
• SFP type, Plug and Play
• 1000BASE-SX/LX: Maximum 120 kilometres
• 100BASE-FX compatible, up to 60 kilometres
9K bytes jumbo frame
40Gbps switch fabric
IP30 aluminum case
DIN-rail and wall-mount design
9V ~ 48V DC or 24V AC redundant power input
-40 ~ 75 degrees C operating temperature
RJ45 to DB9 RS-232 console port for local management and maintenance
17. 17 / 45
Product Features
Wide-ranging Redundant Power Design
PWR1 and PWR2 9~48V DC or 24V AC redundant power input
1A@24V relay alarm for power down and port down
Reverse polarity protection
Connective, removable terminal block for primary and backup power
18. Product Features – Fault Alarm
The IGS-20040MT supports a Fault Alarm feature which can alert the users when
there is something wrong with the switches. With this ideal feature, the users
would not have to waste time to find where the problem is. It will help to save time
and human resource.
18 / 45
19. Product Features – DI & DO
Digital Input
Configuration
Digital Output
Configuration
19 / 45
20. Product Features -- Digital Input
Digital Input detects events or changes in environment via sensing login signal from
high to low or from low to high, and then system is going to log message to local
remote log server, or alarm message via SNMP trap or SMTP with customized error
message.
Digital Input
Security OK Alarm Warning
20 / 45
Reed Switch
21. Product Features -- Digital Output
Digital Output detects IGS-20040MT port failure or power failure,
and then output logic signal of High/Low to trigger the alarm.
Digital Output
DC Power Failure
Trigger
Alarm
Port Failure
Trigger
Alarm
21 / 45
22. Product Features – E.R.P.S.
Redundant Ring, Fast Recovery for Critical Network Applications
The IGS-20040MT incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection
Switching) technology and redundant power input system into customer’s industrial automation
network to enhance system reliability and uptime in harsh factory environments.
22 / 45
23. Product Feature – IEEE 1588
1588 Time Protocol for Industrial Computing Networks
The IGS-20040MT is intended for Telecom and Carrier Ethernet applications, supporting MEF
service delivery and timing over packet solutions for IEEE 1588 and Synchronous Ethernet.
PTP Transparent Configuration
Device type = e2eTransp
2 Step Flag = False (for single step mode)
One way = False (for both Sync and delay messages so frequency and phase can be
calculated)
Protocol = Ethernet (for PTP over layer 2)
Now can choose any port from Master Grand and any port to Slave.
Then the TC node will forward all PTP frames received on one port to the
other and update the correction field in the PTP frames.
PT
P
PT
P
PT
P
PT
P
23 / 45
24. 24 / 45
Full Management
Security Authentication for Secure Management
• SSHv2
• SSL/TLS 1.2
• SNMPv3
SNMP RMON 1 and 2 for in/out network traffic and event monitoring
SNMP trap for device Link Up/Link Down status monitoring
User Privilege levels control
Product Features – Cybersecurity
27. 27 / 45
Product Features
Full Management
IPv4/IPv6 dual stack
IPv6 IP address/NTP/DNS management
Standard-based management
• Web-based
• Telnet
• Console
• SNMP v1, v2c, v3
Security Authentication for secure management
• SSH
• TLS 1.2
• SNMPv3
SNMP RMON 1, 2, 3, 9 for in/out network traffic and event monitoring
SNMP trap for device Linkup / Linkdown status monitoring
User Privilege levels control/Cisco Uni-directional link detection (UDLD)
28. Product Features
Supports VLANs
IEEE 802.1Q tagged VLAN
Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
Private VLAN edge (PVE)
Protocol-based VLAN
MAC-based VLAN
Voice VLAN/GVRP
Layer 3 IP Routing Features
Supports maximum 32 static routes and route summarization
28 / 45
29. Product Features
ITU-T G.8032 ERPS (Ethernet Ring Protection Switching)
Supports multiple ring and ladder topologies
Offers a rapid detection and recovery time if a link or node fails.
Supports Spanning Tree Protocol
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
BPDU Guard and BPDU Filtering enhance switch network reliability, manageability,
and security.
29 / 45
30. Product Features
Quality of Service
8 priority queues on all switch ports
Traffic Classification by:
• 802.1p CoS
• IP DSCP/Precedence of IPv4 / IPv6 packets
• IP TCP/UDP port number
• Typical network applications
Ingress Shaper and Egress Rate Limit per port bandwidth control
Strict priority and Weighted Round Robin (WRR) CoS policy
Traffic-policing policies on the switch port
DSCP Remarking
30 / 45
31. Product Features
Multicast
Supports IGMP Snooping v1, v2 and v3
Support MLD Snooping v1 and v2
Querier mode support
IGMP Snooping filtering
MLD Snooping filtering
MVR (Multicast VLAN Registration)
Supports Link Aggregation
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Cisco ether-channel (static trunk)
Up to 40Gbps bandwidth (duplex mode)
31 / 45
32. Product Features
Security
Network Access Authentication Mechanism
• IEEE 802.1x Port-based authentication for user identity control
• MAC-based authentication for easy deployment
• RADIUS/TACACS+/local profile
Access Control List (ACL)
• IP-based filtering to permit or deny traffic
• MAC-based filtering to permit or deny traffic
Management Source MAC/IP address binding to prevent
unauthorized intruder
32 / 45
33. Product Features
Enhanced Security
DHCP Snooping to filter un-trusted DHCP messages
Dynamic ARP Inspection
• Discards ARP packets with invalid MAC address to IP address binding.
• Protects the network from certain "man-in-the-middle" attacks.
IP Source Guard
• Helps prevent IP spoofing attacks when a host tries to spoof and use the IP
address of another host.
• Any IP traffic with a source IP address other than that assigned will be filtered out.
Auto DoS rule to defend DoS attack
33 / 45
34. Product Features
Management Tools
PLANET NMS System and Smart Discovery Utility for deployment
management
IPv6 IP address / NTP/DNS management
Built-in Trivial File Transfer Protocol (TFTP) client
DHCP for IP address assignment
Auto-configuration for IPv6 address assignment
Firmware upload/download via HTTP/TFTP
DHCP Relay/DHCP Option 82/DHCP Server
NTP (Network Time Protocol)
Link Layer Discovery Protocol (LLDP) Protocol
34 / 45
36. Applications – Industrial Backbone Switch
Maximum 120km fiber optic
cable length supported
Work in conjunction with media
converter for more applications
Redundant connection for
automatic data recovery
36 / 45
37. Security Building Automation Switch
The IGS-20040MT offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) and
Port Security for enforcing security to the edge.
It can be used to restrict network access by denying packets based on source and destination
IP address, TCP/UDP ports or defined typical network applications.
Applications
37 / 45