This document is a material safety data sheet for Liqtro IGO 460, a gear lubricant containing additives to improve lubricant performance. It presents no significant health hazards but can form flammable mixtures when heated. In the event of a fire, use water, foam or dry chemical extinguishers. Exposure is not expected to be a problem in well-ventilated areas, but prolonged skin contact may cause mild discomfort. It has a flash point above 200°C and does not require special disposal methods.
This document provides a material safety data sheet for Liqtro IGO 320, a gear lubricant. It lists the product name and company identification. It describes that the product has no significant health effects and is a low hazard. It provides first aid measures for inhalation, skin contact, eye contact and ingestion. It also details fire fighting measures, spill handling, storage, exposure control, physical and chemical properties, and stability.
This document is a material safety data sheet for Liqtro IGO 220, a gear lubricant containing additives to improve lubricant performance. It presents no significant health hazards but can form flammable mixtures when heated. In the event of skin or eye contact, flush the affected area with water. It should be stored in a cool, well-ventilated area and handled with care, as the containers may contain pressure. The product does not require special protective equipment under normal conditions. It has a flash point above 200 degrees Celsius and will not react with water or oxidizing agents.
This document is a material safety data sheet for Liqtro Turbine 32 oil. It describes the product as a non-EP gas and steam turbine oil formulated to provide satisfactory viscosity and lubrication properties. The document identifies no significant health hazards, low fire and explosion risk, and lists handling and storage guidelines. It provides contact information for the product manufacturer and summarizes first aid measures in case of inhalation, skin contact, eye contact or ingestion.
This document is a material safety data sheet for Liqtro Turbine 46 oil. It describes the product as a non-EP gas and steam turbine oil formulated to provide satisfactory viscosity and lubrication properties. The document outlines that the oil does not pose significant health hazards or require special precautions during normal use and handling, but may cause mild irritation with prolonged skin or eye contact. Instructions are provided for proper storage, spill response, firefighting, and disposal of the product.
This document is a material safety data sheet for Liqtro Turbine 68 oil. It describes the product as a non-EP gas and steam turbine oil formulated to provide satisfactory viscosity and lubrication properties. The document identifies the product and company details, summarizes that the product presents low health, environmental, and physical hazards. It provides first aid measures in case of inhalation, skin contact, eye contact or ingestion and outlines firefighting measures, handling and storage guidelines, exposure controls, and disposal considerations for the product.
This document provides a material safety data sheet for Liqtro Hydraulic ZD 68 hydraulic lubricant. It lists the product and company identification, hazards, composition, safe handling and storage, exposure controls, physical and chemical properties, and stability. The product contains additives to improve lubricant performance and refined mineral base oil. It presents low health, environmental and physical hazards when handled properly.
This document provides a material safety data sheet for Liqtro Hydraulic ZD 100, a hydraulic lubricant. It lists the product and company identification, hazards, composition, safe handling and storage measures, firefighting guidelines, first aid instructions, and disposal considerations. The lubricant contains additives such as zinc alkyl dithiophosphate and refined mineral oil, and poses low health, environmental and physical hazards when handled properly.
This document provides information on Liqtro Extremo CD SAE 30 API Service CD lubricant. It identifies the product and company details in section 1. Section 2 discusses the product's health, environmental, and physical hazards. No significant health effects or hazardous ingredients are expected. The product has a flash point above 200°C and does not require classification based on hazards. Sections 3-7 cover first aid measures, firefighting, accidental spill response, handling and storage, and exposure control. Section 8 lists the product's physical and chemical properties, such as its liquid state, color, odor, and viscosity. Section 9 notes the product is stable and does not undergo hazardous polymerization.
This document provides a material safety data sheet for Liqtro IGO 320, a gear lubricant. It lists the product name and company identification. It describes that the product has no significant health effects and is a low hazard. It provides first aid measures for inhalation, skin contact, eye contact and ingestion. It also details fire fighting measures, spill handling, storage, exposure control, physical and chemical properties, and stability.
This document is a material safety data sheet for Liqtro IGO 220, a gear lubricant containing additives to improve lubricant performance. It presents no significant health hazards but can form flammable mixtures when heated. In the event of skin or eye contact, flush the affected area with water. It should be stored in a cool, well-ventilated area and handled with care, as the containers may contain pressure. The product does not require special protective equipment under normal conditions. It has a flash point above 200 degrees Celsius and will not react with water or oxidizing agents.
This document is a material safety data sheet for Liqtro Turbine 32 oil. It describes the product as a non-EP gas and steam turbine oil formulated to provide satisfactory viscosity and lubrication properties. The document identifies no significant health hazards, low fire and explosion risk, and lists handling and storage guidelines. It provides contact information for the product manufacturer and summarizes first aid measures in case of inhalation, skin contact, eye contact or ingestion.
This document is a material safety data sheet for Liqtro Turbine 46 oil. It describes the product as a non-EP gas and steam turbine oil formulated to provide satisfactory viscosity and lubrication properties. The document outlines that the oil does not pose significant health hazards or require special precautions during normal use and handling, but may cause mild irritation with prolonged skin or eye contact. Instructions are provided for proper storage, spill response, firefighting, and disposal of the product.
This document is a material safety data sheet for Liqtro Turbine 68 oil. It describes the product as a non-EP gas and steam turbine oil formulated to provide satisfactory viscosity and lubrication properties. The document identifies the product and company details, summarizes that the product presents low health, environmental, and physical hazards. It provides first aid measures in case of inhalation, skin contact, eye contact or ingestion and outlines firefighting measures, handling and storage guidelines, exposure controls, and disposal considerations for the product.
This document provides a material safety data sheet for Liqtro Hydraulic ZD 68 hydraulic lubricant. It lists the product and company identification, hazards, composition, safe handling and storage, exposure controls, physical and chemical properties, and stability. The product contains additives to improve lubricant performance and refined mineral base oil. It presents low health, environmental and physical hazards when handled properly.
This document provides a material safety data sheet for Liqtro Hydraulic ZD 100, a hydraulic lubricant. It lists the product and company identification, hazards, composition, safe handling and storage measures, firefighting guidelines, first aid instructions, and disposal considerations. The lubricant contains additives such as zinc alkyl dithiophosphate and refined mineral oil, and poses low health, environmental and physical hazards when handled properly.
This document provides information on Liqtro Extremo CD SAE 30 API Service CD lubricant. It identifies the product and company details in section 1. Section 2 discusses the product's health, environmental, and physical hazards. No significant health effects or hazardous ingredients are expected. The product has a flash point above 200°C and does not require classification based on hazards. Sections 3-7 cover first aid measures, firefighting, accidental spill response, handling and storage, and exposure control. Section 8 lists the product's physical and chemical properties, such as its liquid state, color, odor, and viscosity. Section 9 notes the product is stable and does not undergo hazardous polymerization.
Compressor ISO VG 46 (Material Safety Data Sheet)Eko Kiswanto
This document provides information on a lubricant product called LIQTRO COMPRESSOR 46 ISO VG 46. It lists the product and company identification, including the manufacturer's name and address. It describes that the product has low health, environmental and physical hazards. The document provides instructions for first aid measures in case of inhalation, skin contact, eye contact or ingestion of the product. It also outlines fire-fighting measures and spill handling procedures. Further, it details handling and storage recommendations, exposure controls, and the product's physical and chemical properties. The product is listed as stable and incompatible with strong oxidizing agents.
This document provides safety information for Liqtro Extremo 10W motor oil. It contains additives to improve lubrication as well as refined mineral base oil. No significant health hazards are expected from exposure. In the event of skin contact, wash with soap and water; eye contact should be flushed for 15 minutes. The product is combustible and protective equipment should be worn in the event of a fire. Spills should be cleaned up with absorbent materials and disposal procedures followed. When handling and storing, containers should be kept closed in a cool, well-ventilated area.
This document provides a material safety data sheet for Liqtro IGO 100, a gear lubricant. It lists the product and company identification, hazards identification, composition/information on ingredients, first aid measures, fire fighting measures, accidental release measures, handling and storage, exposure control/personal protection, physical and chemical properties, stability and reactivity. The product contains additives to improve lubricant performance but does not contain any hazardous ingredients according to European regulations. It presents low hazards but can burn upon heating to high temperatures.
This document provides information on Liqtro Extremo 10W motor oil. It identifies the product and company details. The product contains additives like polyolefin amide alkyleneamine borate and does not require classification for health, environmental or physical hazards. In the event of exposure, the document outlines first aid measures. It also provides information on firefighting measures, handling and storage, exposure controls, physical and chemical properties, stability, toxicology and disposal considerations.
This document is a material safety data sheet for Liqtro IGO 150, a gear lubricant containing additives to improve lubricant performance. It presents no significant health hazards but can form flammable mixtures when heated. In the event of skin or eye contact, flush the affected area with water. It should be stored in a cool, well-ventilated area and handled with care, as the containers may contain pressure. The product does not require special protective equipment under normal conditions. It has a flash point above 200 degrees Celsius and will not react with water or oxidizing agents.
Compressor ISO VG 32 (Material Safety Data Sheet)Eko Kiswanto
This document provides information on a lubricant product called LIQTRO COMPRESSOR 32. It lists the product name and company identification in section 1. Section 2 describes the product as having low health, environmental, and physical/chemical hazards. The document provides first aid measures in section 3 in case of inhalation, skin contact, eye contact or ingestion. Sections 4-9 provide additional details on fire fighting measures, spill handling, storage, exposure control, physical/chemical properties, and stability of the product.
This document provides a material safety data sheet for Liqtro Hydraulic S 32 hydraulic lubricant. It summarizes key details including the product name and company identification. It describes that the product has low health, environmental, and fire/explosion hazards. The document outlines first aid measures in case of inhalation, skin contact, eye contact or ingestion. It also provides handling, storage, exposure control and disposal information to ensure safe use of the product.
Compressor ISO VG 100 (Material Safety Data Sheet)Eko Kiswanto
This document provides a material safety data sheet for Liqtro Compressor 100 ISO VG 100 lubricant. It identifies the product as an ashless lubricant for compressors that does not contain any hazardous ingredients according to European regulations. The document lists the product identification and company details, summarizes that there are minimal health and environmental hazards, and provides guidance on handling, storage, exposure controls, and disposal of the product.
This document provides a material safety data sheet for Liqtro Igo 68, a gear lubricant. It lists the product and company identification, hazards identification, composition/information on ingredients, first aid measures, fire fighting measures, accidental release measures, handling and storage, exposure control/personal protection, physical and chemical properties, stability and reactivity. The product contains additives to improve lubricant performance but does not contain any hazardous ingredients according to European regulations. No significant health effects are expected from exposure.
This document provides a material safety data sheet for Liqtro Hydraulic ZD 32 hydraulic lubricant. It lists the product and company identification, hazards, composition, safe handling and storage, exposure controls, physical and chemical properties, stability, toxicological information, ecological impacts, and disposal considerations. The product contains additives to improve lubricant performance and refined mineral base oil, but does not require classification for health, environmental, or physical hazards. Proper precautions like ventilation and protective equipment are recommended for handling.
This document provides a material safety data sheet for LIQTRO HYDRAULIC ZD 46 hydraulic lubricant. It describes the product as a hydraulic lubricant containing additives like zinc alkyl dithiophosphate and refined mineral base oil. The document indicates the product presents low health, environmental, and physical/chemical hazards. No significant health effects are expected from exposure. In case of fire, use carbon dioxide, foam, dry chemical or water to extinguish. Handle and store in a cool, well-ventilated place away from ignition sources and incompatible materials.
This document provides information on the material safety data sheet for Liqtro Extremo CF SAE 40 API Service CF lubricant. It contains additives that improve lubricant performance including polyolefin amide alkyleneamine borate and zinc alkyl dithiophosphate. The product poses low health, environmental and physical/chemical hazards. It has a flash point above 200°C and does not require classification as a dangerous substance. Proper personal protective equipment should be worn when handling.
This document provides information on the product Liqtro TGO 140 SAE 140, a heavy-duty automotive gear lubricant. It identifies the product and company details. The product does not contain any hazardous ingredients according to European regulations. While no significant health effects are expected, it is recommended to use proper protective equipment like eye protection and gloves when handling. The product is stable and avoiding extreme heat. In case of fire, use water spray, foam or dry chemical to extinguish.
Compressor ISO VG 68 (Material Safety Data Sheet)Eko Kiswanto
This document provides a material safety data sheet for Liqtro Compressor 68 ISO VG 68 lubricant. It identifies the product and company responsible for its distribution. The product does not pose any significant health hazards and has low flammability. In the event of fire, water can be used to extinguish flames. Proper handling and storage procedures are outlined to prevent risks to health, safety, and the environment.
Compressor ISO VG 150 (Material Safety Data Sheet)Eko Kiswanto
This document provides information on Liqtro Compressor 150 ISO VG 150 lubricant. It identifies the product and company producing it. No significant health hazards are expected, though it can form flammable mixtures when heated. In case of skin or eye contact, flush the affected area with water. In a fire, use water spray, foam, or dry chemical to extinguish flames. Proper handling and storage procedures are outlined to prevent risks like spills or exposure through inhalation, skin contact, or ingestion. The product contains no hazardous ingredients according to European regulations.
This document provides information on the product LIQTRO TGO 90 SAE 90, including:
1. It is a heavy-duty automotive gear lubricant containing additives like alkyl phosphoric acid ester amine salts and sulfurized isobutylene in mineral base oil.
2. It presents low health, environmental and physical/chemical hazards. Fire risk only upon heating to flash point.
3. In case of skin contact, flush with water; if ingested, do not induce vomiting and seek prompt medical attention.
This document provides information on the properties and safe handling of Liqtro Forming-Chlorine B ISO VG 220 lubricant. It presents no significant health hazards, is not classified as an environmental hazard, and has a low risk of fire. The document identifies the product and manufacturing company. It outlines first aid measures for exposure and firefighting procedures. It also provides instructions for safe storage, handling, exposure control, and outlines the product's physical and chemical properties.
This document provides safety information for Liqtro Neat Cutting Oil B ISO VG 32. It summarizes that the product is a mineral cutting oil formulated with EP additives and fatty esters, intended for medium to heavy duty operations. The product does not contain any hazardous ingredients according to European regulations. It also presents handling guidelines including storing in a cool, well-ventilated area and wearing protective equipment like gloves and eye protection when handling.
This document provides a material safety data sheet for LIQTRO Forming-Chlorine A ISO VG 220 lubricant. It lists the product and company identification, hazards identification, composition/information on ingredients, first aid measures, fire fighting measures, accidental release measures, handling and storage, exposure controls/personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, transport information, and regulatory information. The lubricant poses low health, environmental and physical hazards. No significant health effects are expected from exposure. It is stable and not reactive.
Extremo CH4-SJ SAE 15W-40 (Material Safety Data Sheet)Eko Kiswanto
1. This document provides a material safety data sheet for the product Liqtro Extremo CH4 SAE 15W-40 API Service CH-4/SJ, a multigrade lubricant containing additives to improve lubricant performance.
2. The product poses low health, environmental, and fire/explosion hazards. It does not require classification based on health or environmental hazards.
3. In the event of inhalation, skin contact, eye contact, or ingestion, first aid measures such as artificial respiration, flushing with water, and seeking prompt medical attention are recommended depending on the situation.
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help boost feelings of calmness and well-being.
Approximating Source Accuracy Using Dublicate Records in Da-ta IntegrationIOSR Journals
This document proposes a new method to approximate data source accuracy in data integration systems using duplicate records. It discusses challenges with directly calculating accuracy for all sources by comparing to real-world data. The method selects a reference source based on completeness, timestamp, internal consistency and trustworthiness. The reference source's accuracy is calculated normally by comparison. Other source accuracies are then approximated using a similarity ratio between common records and the conditional probability that similarities are accurate. Non-similar records may be resolved by votes from other sources. The method assumes sources are independent and duplicate records are representative. It provides a way to estimate accuracy without extensive real-world comparisons.
Compressor ISO VG 46 (Material Safety Data Sheet)Eko Kiswanto
This document provides information on a lubricant product called LIQTRO COMPRESSOR 46 ISO VG 46. It lists the product and company identification, including the manufacturer's name and address. It describes that the product has low health, environmental and physical hazards. The document provides instructions for first aid measures in case of inhalation, skin contact, eye contact or ingestion of the product. It also outlines fire-fighting measures and spill handling procedures. Further, it details handling and storage recommendations, exposure controls, and the product's physical and chemical properties. The product is listed as stable and incompatible with strong oxidizing agents.
This document provides safety information for Liqtro Extremo 10W motor oil. It contains additives to improve lubrication as well as refined mineral base oil. No significant health hazards are expected from exposure. In the event of skin contact, wash with soap and water; eye contact should be flushed for 15 minutes. The product is combustible and protective equipment should be worn in the event of a fire. Spills should be cleaned up with absorbent materials and disposal procedures followed. When handling and storing, containers should be kept closed in a cool, well-ventilated area.
This document provides a material safety data sheet for Liqtro IGO 100, a gear lubricant. It lists the product and company identification, hazards identification, composition/information on ingredients, first aid measures, fire fighting measures, accidental release measures, handling and storage, exposure control/personal protection, physical and chemical properties, stability and reactivity. The product contains additives to improve lubricant performance but does not contain any hazardous ingredients according to European regulations. It presents low hazards but can burn upon heating to high temperatures.
This document provides information on Liqtro Extremo 10W motor oil. It identifies the product and company details. The product contains additives like polyolefin amide alkyleneamine borate and does not require classification for health, environmental or physical hazards. In the event of exposure, the document outlines first aid measures. It also provides information on firefighting measures, handling and storage, exposure controls, physical and chemical properties, stability, toxicology and disposal considerations.
This document is a material safety data sheet for Liqtro IGO 150, a gear lubricant containing additives to improve lubricant performance. It presents no significant health hazards but can form flammable mixtures when heated. In the event of skin or eye contact, flush the affected area with water. It should be stored in a cool, well-ventilated area and handled with care, as the containers may contain pressure. The product does not require special protective equipment under normal conditions. It has a flash point above 200 degrees Celsius and will not react with water or oxidizing agents.
Compressor ISO VG 32 (Material Safety Data Sheet)Eko Kiswanto
This document provides information on a lubricant product called LIQTRO COMPRESSOR 32. It lists the product name and company identification in section 1. Section 2 describes the product as having low health, environmental, and physical/chemical hazards. The document provides first aid measures in section 3 in case of inhalation, skin contact, eye contact or ingestion. Sections 4-9 provide additional details on fire fighting measures, spill handling, storage, exposure control, physical/chemical properties, and stability of the product.
This document provides a material safety data sheet for Liqtro Hydraulic S 32 hydraulic lubricant. It summarizes key details including the product name and company identification. It describes that the product has low health, environmental, and fire/explosion hazards. The document outlines first aid measures in case of inhalation, skin contact, eye contact or ingestion. It also provides handling, storage, exposure control and disposal information to ensure safe use of the product.
Compressor ISO VG 100 (Material Safety Data Sheet)Eko Kiswanto
This document provides a material safety data sheet for Liqtro Compressor 100 ISO VG 100 lubricant. It identifies the product as an ashless lubricant for compressors that does not contain any hazardous ingredients according to European regulations. The document lists the product identification and company details, summarizes that there are minimal health and environmental hazards, and provides guidance on handling, storage, exposure controls, and disposal of the product.
This document provides a material safety data sheet for Liqtro Igo 68, a gear lubricant. It lists the product and company identification, hazards identification, composition/information on ingredients, first aid measures, fire fighting measures, accidental release measures, handling and storage, exposure control/personal protection, physical and chemical properties, stability and reactivity. The product contains additives to improve lubricant performance but does not contain any hazardous ingredients according to European regulations. No significant health effects are expected from exposure.
This document provides a material safety data sheet for Liqtro Hydraulic ZD 32 hydraulic lubricant. It lists the product and company identification, hazards, composition, safe handling and storage, exposure controls, physical and chemical properties, stability, toxicological information, ecological impacts, and disposal considerations. The product contains additives to improve lubricant performance and refined mineral base oil, but does not require classification for health, environmental, or physical hazards. Proper precautions like ventilation and protective equipment are recommended for handling.
This document provides a material safety data sheet for LIQTRO HYDRAULIC ZD 46 hydraulic lubricant. It describes the product as a hydraulic lubricant containing additives like zinc alkyl dithiophosphate and refined mineral base oil. The document indicates the product presents low health, environmental, and physical/chemical hazards. No significant health effects are expected from exposure. In case of fire, use carbon dioxide, foam, dry chemical or water to extinguish. Handle and store in a cool, well-ventilated place away from ignition sources and incompatible materials.
This document provides information on the material safety data sheet for Liqtro Extremo CF SAE 40 API Service CF lubricant. It contains additives that improve lubricant performance including polyolefin amide alkyleneamine borate and zinc alkyl dithiophosphate. The product poses low health, environmental and physical/chemical hazards. It has a flash point above 200°C and does not require classification as a dangerous substance. Proper personal protective equipment should be worn when handling.
This document provides information on the product Liqtro TGO 140 SAE 140, a heavy-duty automotive gear lubricant. It identifies the product and company details. The product does not contain any hazardous ingredients according to European regulations. While no significant health effects are expected, it is recommended to use proper protective equipment like eye protection and gloves when handling. The product is stable and avoiding extreme heat. In case of fire, use water spray, foam or dry chemical to extinguish.
Compressor ISO VG 68 (Material Safety Data Sheet)Eko Kiswanto
This document provides a material safety data sheet for Liqtro Compressor 68 ISO VG 68 lubricant. It identifies the product and company responsible for its distribution. The product does not pose any significant health hazards and has low flammability. In the event of fire, water can be used to extinguish flames. Proper handling and storage procedures are outlined to prevent risks to health, safety, and the environment.
Compressor ISO VG 150 (Material Safety Data Sheet)Eko Kiswanto
This document provides information on Liqtro Compressor 150 ISO VG 150 lubricant. It identifies the product and company producing it. No significant health hazards are expected, though it can form flammable mixtures when heated. In case of skin or eye contact, flush the affected area with water. In a fire, use water spray, foam, or dry chemical to extinguish flames. Proper handling and storage procedures are outlined to prevent risks like spills or exposure through inhalation, skin contact, or ingestion. The product contains no hazardous ingredients according to European regulations.
This document provides information on the product LIQTRO TGO 90 SAE 90, including:
1. It is a heavy-duty automotive gear lubricant containing additives like alkyl phosphoric acid ester amine salts and sulfurized isobutylene in mineral base oil.
2. It presents low health, environmental and physical/chemical hazards. Fire risk only upon heating to flash point.
3. In case of skin contact, flush with water; if ingested, do not induce vomiting and seek prompt medical attention.
This document provides information on the properties and safe handling of Liqtro Forming-Chlorine B ISO VG 220 lubricant. It presents no significant health hazards, is not classified as an environmental hazard, and has a low risk of fire. The document identifies the product and manufacturing company. It outlines first aid measures for exposure and firefighting procedures. It also provides instructions for safe storage, handling, exposure control, and outlines the product's physical and chemical properties.
This document provides safety information for Liqtro Neat Cutting Oil B ISO VG 32. It summarizes that the product is a mineral cutting oil formulated with EP additives and fatty esters, intended for medium to heavy duty operations. The product does not contain any hazardous ingredients according to European regulations. It also presents handling guidelines including storing in a cool, well-ventilated area and wearing protective equipment like gloves and eye protection when handling.
This document provides a material safety data sheet for LIQTRO Forming-Chlorine A ISO VG 220 lubricant. It lists the product and company identification, hazards identification, composition/information on ingredients, first aid measures, fire fighting measures, accidental release measures, handling and storage, exposure controls/personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, transport information, and regulatory information. The lubricant poses low health, environmental and physical hazards. No significant health effects are expected from exposure. It is stable and not reactive.
Extremo CH4-SJ SAE 15W-40 (Material Safety Data Sheet)Eko Kiswanto
1. This document provides a material safety data sheet for the product Liqtro Extremo CH4 SAE 15W-40 API Service CH-4/SJ, a multigrade lubricant containing additives to improve lubricant performance.
2. The product poses low health, environmental, and fire/explosion hazards. It does not require classification based on health or environmental hazards.
3. In the event of inhalation, skin contact, eye contact, or ingestion, first aid measures such as artificial respiration, flushing with water, and seeking prompt medical attention are recommended depending on the situation.
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help boost feelings of calmness and well-being.
Approximating Source Accuracy Using Dublicate Records in Da-ta IntegrationIOSR Journals
This document proposes a new method to approximate data source accuracy in data integration systems using duplicate records. It discusses challenges with directly calculating accuracy for all sources by comparing to real-world data. The method selects a reference source based on completeness, timestamp, internal consistency and trustworthiness. The reference source's accuracy is calculated normally by comparison. Other source accuracies are then approximated using a similarity ratio between common records and the conditional probability that similarities are accurate. Non-similar records may be resolved by votes from other sources. The method assumes sources are independent and duplicate records are representative. It provides a way to estimate accuracy without extensive real-world comparisons.
Este documento fornece informações sobre manchas e danos em roupas hospitalares. Ele discute sujidades esperadas e não esperadas, como sangue, fezes e produtos químicos. Também aborda manchas difíceis de remover causadas por sangue seco ou medicamentos. O documento identifica situações que podem danificar roupas, como o uso indevido de hipoclorito ou equipamentos cirúrgicos misturados com roupas. Ele destaca a importância de compartilhar conhecimento para melhorar os processos de lavanderia hospitalar.
This document contains advertisements and announcements from various newspapers promoting local businesses and events. It recognizes winners of the 2011 PALMY Awards for newspaper promotion categories. The top three placements are listed for categories under 6,000 circulation, 6,000-12,000 circulation, and over 12,000 circulation. Many of the winning promotions highlight local merchants, sales, community events like parades, and ways newspapers help advertise for businesses and non-profits.
The document is an issue of SMT Magazine from March 2006 that contains articles on various topics related to surface mount technology. It includes articles on traceability systems and ensuring data integrity, jetting dispense technology for adhesive application, analyzing the debate around clean vs. no-clean soldering, identifying stencils for lead-free solder paste, matte finish solder joints from lead-free wave soldering, and due diligence verification for RoHS compliance. It also contains advertisements, news briefs, and the third installment of a column on solder materials selection.
The document discusses the results of a study on the effects of exercise on memory and thinking abilities in older adults. The study found that regular exercise can help reduce the decline in thinking abilities that often occurs with age. Older adults who exercised regularly performed better on cognitive tests and brain scans showed they had greater activity in important areas for memory and learning compared to less active peers.
This document is a material safety data sheet for Liqtro Hydraulic S 68, a hydraulic lubricant containing zinc additives. It presents information on the product identification, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, and regulatory information. The product does not require classification based on health, environmental, or physical hazards. It has a flash point above 200 degrees Celsius and does not pose significant health effects.
This document provides information on Liqtro Neat Cutting Oil A ISO VG 32. It is a mineral cutting oil formulated with EP additives and fatty esters to be chlorine-free with good lubricity and load capacity for light to medium machining. It presents low health, environmental, and fire/explosion hazards. Proper handling involves storing in a cool, well-ventilated area away from heat and ignition sources. Exposure controls include eye and skin protection, and the product can be disposed by burning in appropriate equipment or via the landfill.
This document provides information on Liqtro Enduro SF motor oil. It identifies the product and company details. The product is classified as non-hazardous and poses low risk of fire or explosion. Exposure can cause mild eye or skin irritation. In the event of contact, wash with water and seek medical attention if issues persist. The product contains no hazardous ingredients and has no significant health or environmental effects. It can be handled and stored safely at normal temperatures and pressures.
This document provides a material safety data sheet for Liqtro Hydraulic S 46 hydraulic lubricant. It lists the product and company identification, hazards identification, composition/information on ingredients, first aid measures, fire fighting measures, accidental release measures, handling and storage, exposure controls/personal protection, physical and chemical properties, stability and reactivity, toxicological information, and other details. The product contains zinc-based additives and is classified as a low hazard that requires no special protective equipment for normal handling. Spills should be cleaned up with absorbent materials and preventing environmental contamination.
This document is a material safety data sheet for Liqtro 2T Semi-Syn, a lubricant additive containing polybutene and refined mineral oil. It presents no significant health hazards but can form flammable mixtures when heated. In the event of a fire, water can be used to extinguish flames. The product should be stored in a cool, well-ventilated area and handled with care. When spilled, it can be cleaned up with absorbent materials. Direct contact may cause mild skin or eye irritation. It is not suitable for disposal in landfills or sewers.
This document provides a material safety data sheet for LIQTRO SBO 220 lubricating oil. It describes the product as a high viscosity index, straight mineral oil intended for moderate duty equipment. The document lists the product name, manufacturer contact information, and summarizes that the product does not require classification for health, environmental or physical hazards. It provides guidance on handling, storage, exposure controls, and first aid measures for the product.
This document provides information on Liqtro Enduro Supra SAE 15W-40 motor oil, including:
- It is formulated for API SL performance and protects against deposits while reducing oil consumption.
- Contact information is provided for the blending plant and laboratory in Bekasi, Indonesia and the office in Jakarta.
- The product does not require classification based on health, environmental, or physical/chemical hazards. It can burn only when heated above the flash point.
- In case of inhalation, skin contact, or ingestion, remove the affected individual from exposure and seek prompt medical attention. For fires, use water spray, dry chemical, or foam to extinguish.
This document is a material safety data sheet for Liqtro Hydraulic S 37, a hydraulic lubricant containing zinc additives. It presents information on the product identification, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, and regulatory information. The product does not require classification based on health, environmental, or physical hazards. It has a flash point above 200 degrees Celsius and does not pose significant health effects.
This document provides information on Liqtro Enduro Supra SAE 20W-50 motor oil, including:
- It is formulated from selected high quality base oils and additives to provide protection against deposits, degradation, and evaporation.
- No significant health hazards are expected under normal conditions. It is not classified as hazardous to the environment.
- In case of fire, use carbon dioxide, foam, dry chemical or water fog. Personnel should wear self-contained breathing apparatus.
- If spilled, absorb with materials like sawdust and dispose properly. Prevent spill from entering water systems.
- Store in a cool, well-ventilated area away from heat and ignition sources
This document is a material safety data sheet for LIQTRO EXTREMO CH4 SAE 20W-50 API SERVICE CH4/SJ motor oil. It describes the product as a multigrade lubricant containing additives to improve lubricant performance. The document lists the product manufacturer and provides information on health, fire, and environmental hazards. It also includes details on first aid measures, firefighting measures, accidental release measures, storage, exposure controls, physical properties, and stability of the product.
This document is a material safety data sheet for LIQTRO Forming A, a metal forming lubricant. It provides information on product identification, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, and regulatory information. The product contains EP, lubricity and anti-wear additives and provides tool and mold protection during metal forming. It does not contain any hazardous ingredients according to European regulations.
The document provides technical details and instructions for an AF-3 filling machine. It includes:
- An overview of the machine components and operation procedures.
- Safety guidelines for transport, installation, operation and maintenance.
- Mechanical drawings of the major assemblies - load cell & drum clamp, nozzle, and structure - with part lists.
- Electrical & pneumatic diagrams showing connections, wiring and functions.
- Parameter settings for the weighing indicator and maintenance instructions.
The document provides details on the 1KD-FTV and 2KD-FTV diesel engines used in Toyota vehicles like the Hilux and Fortuner. It describes the engine components like the common rail fuel system that uses a high-pressure supply pump and common rail to achieve precise fuel injection for lower emissions. It also details the variable nozzle turbocharger and other systems that help improve power and efficiency while meeting emissions standards.
The document provides information about the 1TR-FE engine used in Toyota vehicles, including its specifications and components. It describes the overall engine layout and key systems such as cooling, fuel injection, ignition, and engine controls. The 1TR-FE is a 2.0L inline 4-cylinder 16-valve DOHC engine with VVT-i and produces 100kW of power at 5,600rpm and 182Nm of torque at 4,000rpm. It uses features like a resin intake manifold, long nozzle fuel injectors, and DIS ignition to improve performance and emissions.
This document is the 2014 catalogue for Trans Tech Publications Inc., which publishes online journals and book series related to materials science and engineering. It provides information on the various online periodicals and book series published on their websites www.ttp.net and www.scientific.net. It also includes summaries and ordering information for several recent publications covering topics such as advanced materials, nanotechnology, composite materials, and manufacturing engineering. The catalogue promotes the many publications available and provides details for interested researchers to publish or find relevant content.
This document provides a catalogue for materials science and engineering titles published by Trans Tech Publications Limited between 2008-2011. It includes sections for forthcoming titles, latest titles published 2008-2010, and a full listing of current titles. It also provides information on Trans Tech's online journals in materials science and engineering. Key must-have handbooks published in the Materials Science Foundations series are highlighted.
This document is a 2012 catalogue for Materials Science & Engineering publications from Trans Tech Publications Limited. It provides summaries and ordering information for several recent titles related to materials science, including books on dye-sensitized solar cells, ecological environment functional materials, advanced design and manufacturing, and mechatronics technology. The catalogue describes that most titles are available in print, on CD, and as eBooks, and provides details on how to order or find more information.
The UltraLight Steel Auto Body (ULSAB) Consortium designed and validated a lightweight steel auto body structure that meets increased performance targets while remaining affordable to produce. The final report details the design process, including benchmarking existing vehicles, establishing packaging and performance goals, and selecting a unibody design with hydroformed parts. Physical testing showed the ULSAB structure exceeds benchmarks for torsional and bending rigidity by 80% and 52% respectively. Computational analysis also indicated it meets crash standards. At 203kg, the ULSAB structure weighs up to 36% less than benchmarks and economic analysis found it costs similar or less to produce than conventional designs.
The ULSAB Phase 2 project validated concepts from Phase 1 by building demonstration hardware. Phase 2 achieved its goals of significant mass reduction compared to a reference vehicle, while meeting structural and crash performance targets. Testing showed the design exceeded Phase 1 targets for torsional and bending rigidity, and modal frequency. Mass reduction was 25% lower than the reference, and crash tests met new safety requirements. High strength steel use increased to 90% of the structure's mass. An economic analysis found the design could be produced at a similar or lower cost than conventional designs.
This document provides an introduction and table of contents for the WIKA-Handbook on Pressure and Temperature Measurement. It describes WIKA as a leading manufacturer of pressure and temperature instruments for over 50 years. The handbook is intended to be a reference for customers, covering fundamentals and practical applications of industrial pressure and temperature measurement. It will present all common measurement methods and consider new developments in mechanical and electronic sensors. The table of contents provides an overview of topics that will be covered in the two main sections on pressure measurement and thermometry.
Dokumen memberikan tips untuk menjaga performa coolant dengan mengontrol konsentrasi coolant menggunakan refractometer, membersihkan tramp oil setiap hari, membersihkan serpihan logam dari sump-tank, memeriksa pH secara rutin, dan mengisi laporan analisis coolant setiap hari.
Whizol supplies specialized oils, lubricants, and chemicals for industrial processes through scientific research. They offer a product development and technical service team to discuss customer needs and perform maintenance or lubricant applications. Whizol has a wide range of products for industrial process oils, metalworking fluids, and more that have passed international requirements and OEM standards, with performance inspected using state-of-the-art machines. Their products cover needs for machining operations like honing, grinding, drilling, and more.
This document describes various metalworking fluids, industrial lubricants, and automotive coolants made by Whizol. It includes neat cutting oils, soluble oils, semi-synthetic and synthetic emulsions for machining and grinding, rust preventatives, quenching oils, hydraulic oils, slideway oils, and engine coolant. Product details like typical properties, benefits, and packaging options are provided for each type.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Building Production Ready Search Pipelines with Spark and MilvusZilliz
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Webinar: Designing a schema for a Data WarehouseFederico Razzoli
Are you new to data warehouses (DWH)? Do you need to check whether your data warehouse follows the best practices for a good design? In both cases, this webinar is for you.
A data warehouse is a central relational database that contains all measurements about a business or an organisation. This data comes from a variety of heterogeneous data sources, which includes databases of any type that back the applications used by the company, data files exported by some applications, or APIs provided by internal or external services.
But designing a data warehouse correctly is a hard task, which requires gathering information about the business processes that need to be analysed in the first place. These processes must be translated into so-called star schemas, which means, denormalised databases where each table represents a dimension or facts.
We will discuss these topics:
- How to gather information about a business;
- Understanding dictionaries and how to identify business entities;
- Dimensions and facts;
- Setting a table granularity;
- Types of facts;
- Types of dimensions;
- Snowflakes and how to avoid them;
- Expanding existing dimensions and facts.
Fueling AI with Great Data with Airbyte WebinarZilliz
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
AI 101: An Introduction to the Basics and Impact of Artificial IntelligenceIndexBug
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Generating privacy-protected synthetic data using Secludy and MilvusZilliz
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Monitoring and Managing Anomaly Detection on OpenShift.pdfTosin Akinosho
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Industrial Gear Oil ISO VG 460
1. MATERIAL SAFETY DATA SHEET
PRODUCT NAME : LIQTRO IGO 460
ISO VG 460
REV. 01ST FEBRUARY 2004
-----------------------------------------------------------------------------
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
---------------------------------------------------------------------------------------------
PRODUCT DESCRIPTION: Gear Lubricant, containing additives to improve the performance of
lubricants such as Alkyl Phosphoric Acid Ester Amine Salts, Dibutyl Hydrogen Phosphite, Sulphurized
Isobutylene and refined mineral base oil.
.
.
COMPANY IDENTIFICATION:
Smessindo Sakti Mandraguna
BLENDING PLANT and LABORATORY DIVISION
Jln. Diponegoro KM 40 No. 62 Tambun-Bekasi 17510
Phone. 62-21 8808620 Fax. 62-21- 88354786
OFFICE
Manara Era Building # 10-03
Jl. Raya Senen Kav. 135-137 Jakarta 10410
Phone. 62-21-3862426, Fax: 62-21-3863448
-------------------------------------------------------------------------------
2. HAZARDS IDENTIFICATION
-------------------------------------------------------------------------------
HEALTH HAZARDS
• No significant effects expected
ENVIRONMENTAL HAZARDS
• This preparation does not require classification on the basis of environmental hazard.
PHYSICAL AND CHEMICAL HAZARDS / FIRE AND EXPLOSION HAZARDS
• Low hazard. Material can form flammable mixtures or can burn only upon heating to
temperatures at or above the flash point.
This product does not contain any hazardous ingredient as the regulation from European Union
Dangerous Substance / Preparation Directive.
------------------------------------------------------------------------------
3. FIRST AID MEASURES
-------------------------------------------------------------------------------
INHALATION :
• Not expected to be a problem in well-ventilated area. Using proper respiratory protection,
immediately remove the affected from overexposure victim. Administer artificial respiration if
breathing is stopped. Keep at rest. Call for prompt medical
attention.
SKIN CONTACT :
• In case of frequent or prolonged contact, flush with large amounts of water; use soap if
available.
EYE CONTACT :
• Immediately flush eyes with large amounts of water for at least 15 minutes. Get prompt
medical attention.
INGESTION :
• If swallowed, DO NOT induce vomiting. Keep at rest. Get prompt medical attention. If greater
than 0.5 liter ingested, immediately give 1 or 2 glasses of water and call physician and hospital
for assistance.
Page 1 of 4
2. MATERIAL SAFETY DATA SHEET
PRODUCT NAME : LIQTRO IGO 460
ISO VG 460
REV. 01ST FEBRUARY 2004
-------------------------------------------------------------------------------
4. FIRE-FIGHTING MEASURES
-------------------------------------------------------------------------------
Fire Extinguisher : Carbon Dioxide, foam, dry chemical and water fog
Fire Fighting Procedure :
• Use water spray to cool fire exposed surfaces and to protect personnel.
• Use foam, dry chemical, or water spray to extinguish fire source.
SPECIAL FIRE PRECAUTIONS:
• Respiratory and eye protection required for fire fighting personnel.
• Avoid spraying water directly into storage containers due to danger of boil over.
• Prevent runoff from fire or dilution from entering streams, sewers, or drinking water supply.
Special Protector Equipment : The fireman have to wear Self Contained Breathing Apparatus (SCBA)
Explosion and another fire danger : Toxic Fumes
Flash Point, o C : 231 (ASTM D-92)
Flammable limits –LEL : none
UEL : none
NFPA Hazard ID : Health : 2, flammability : 1, Reactivity : 0
Hazardous Material Decomposition : Carbon Monoxide, Another Oxide
-------------------------------------------------------------------------------
5. SPILL AND LEAKAGE HANDLING
-------------------------------------------------------------------------------
Procedure note : Report the spill happened according to system and procedure decided.
If the spill could be enter the aqueduct or river, please report to authority
officer as soon as possible.
Leakage and Spill Procedure : Absorb the spill by saw-dust, clay, and another fire resistant material.
Clean up and discard to the location that have been decided.
Prevention on Environment : Prevent the spill entering the gutter, waste canal, and into the soil.
-------------------------------------------------------------------------------
6. HANDLING AND STORAGE
-------------------------------------------------------------------------------
STORAGE TEMPERATURE (Deg C) : 60.0 Maximum
TRANSPORT TEMPERATURE (Deg C) : 60.0 Maximum
LOADING/UNLOADING TEMPERATURE (Deg C) : 60.0 Maximum
STORAGE/TRANSPORT PRESSURE (k Pa) : Atmospheric
STORAGE / HANDLING, GENERAL NOTES :
• Keep container closed. Handle containers with care. Open slowly in order to control possible
pressure release. Store in a cool, well-ventilated place away from incompatible materials.
• DO NOT handle, store or open near an open flame, sources of heat or sources of ignition.
Protect material from direct sunlight.
• DO NOT pressurize, cut, heat, or weld containers. Empty product containers may contain
product residue. DO NOT reuse empty containers without commercial cleaning or
reconditioning.
-------------------------------------------------------------------------------
7. EXPOSURE CONTROL / SELF PROTECTION
-------------------------------------------------------------------------------
Ventilation : Commonly there is no special regulation for ventilation on normal condition
Breath Protection : There is no special regulation on normal condition.
Eye Protection : Use eye protection equipment.
Skin Protection : Regulation for personnel hygiene still have to give a notice. Use the nitrile gloves, long
arm shirt, boots. Don’t use ring or watch because it can make skin reaction.
Exposure limit : This product doesn’t contain any material that have been known have exposure limit
value. But we can use exposure limit value (OSHA PEL) from the vapor, i.e 5.00 mg/m3
and ACGIH STEL, i.e. 10 mg/m3.
Page 2 of 4
3. MATERIAL SAFETY DATA SHEET
PRODUCT NAME : LIQTRO IGO 460
ISO VG 460
REV. 01ST FEBRUARY 2004
-------------------------------------------------------------------------------
8. PHYSICAL AND CHEMICAL PROPERTIES
-------------------------------------------------------------------------------
These are indicative values only. Please refer also to the product specification sheet.
Property LIQTRO IGO 460
Physical State Liquid
Color (ASTM D 1500) L 3.0
Odor Mild hydrocarbon
Boiling Point > 316 Deg C Typical
Flash Point (COC ASTM D 92) > 200 Deg C Minimum
Material Hygroscopic No
Density (15 Deg C,ASTM D 4052) 0.9122 g/cm3
Viscosity at 400 C (ASTM D 445) 468.30 cSt
Viscosity at 1000 C (ASTM D 445) 29.90 cSt
Viscosity Index (ASTM D 2270) 92
Foaming Tendency/stability (ASTM D 892)
Seq. I 0/0 ml
Seq. II 10/0 ml
Seq. III 0/0 ml
Water Separability (80 Deg C, ASTM D 1401) 40-40-0
(20 minutes)
-------------------------------------------------------------------------------
9. STABILITY AND REACTIVITY
-------------------------------------------------------------------------------
HAZARDOUS POLYMERIZATION : No
STABILITY (THERMAL, LIGHT, ETC) : Stable
CONDITION TO AVOID : Extreme Heat
MATERIALS AND CONDITIONS TO AVOID (INCOMPATIBILITY) : Strong oxidizing agents.
-------------------------------------------------------------------------------
10. TOXICOLOGICAL INFORMATION
-------------------------------------------------------------------------------
INHALATION :
• Negligible hazard at ambient (-20 to 60 Deg C) or recommended blending temperature.
WARNING :
• Repeated and prolonged overexposure to oil mists may result in droplet deposition, oil
granuloma formation, inflammation and increased incidence of infection.
SKIN CONTACT :
• Low order of toxicity.
• Frequent or prolonged contact may cause mild skin discomfort.
EYE CONTACT :
• mild irritation. If not removed promptly, will injure eye tissue,
which may result in permanent damage.
INGESTION :
• Minimal toxicity.
Page 3 of 4
4. MATERIAL SAFETY DATA SHEET
PRODUCT NAME : LIQTRO IGO 460
ISO VG 460
REV. 01ST FEBRUARY 2004
------------------------------------------------------------------------------
11. ECOLOGY INFORMATION
-------------------------------------------------------------------------------
Impact and damage on environment :
Non-toxic---- based on testing of similar material and component.
-------------------------------------------------------------------------------
12. DISPOSAL CONSIDERATIONS
-------------------------------------------------------------------------------
• This product is NOT suitable for disposal by either landfill or via municipal sewers,
drains, natural streams or rivers.
• This product will generate an ash if burned.
• It can be burned directly in appropriate equipment.
------------------------------------------------------------------------------
13. REGULATION INFORMATION
-------------------------------------------------------------------------------
based on U.S. Superfund Amendment and Reauthorization Act (SARA) this product doesn’t
contain EXTREMLY HAZARDOUS more than 1%
Additional information is available on special request
---------------------------------------------------------------
Page 4 of 4