Tongher electric fence energizer,how to connect electric fence with CCTV cameras,and alarm systems,with NO/NC,alarm in to integrate,triggering an alarm when the fence wires are cut.
Contact for more detail:dragon@tonghertech.com/www.tonghertech.com
This document discusses the manufacturing of electrical switches. It describes the basic components and types of switches, including one-way, two-way, intermediate, and push button switches. The manufacturing process involves molding the switch housing, installing a conducting toggling element, and fixing terminals. Raw materials include molding powder, screws, terminals, springs, and packaging materials. Machinery such as molding machines, molds, buffer machines, and testing machines are used. Advantages of switches include increased network bandwidth and performance, while disadvantages include higher costs and difficulty tracing network issues.
The document describes Siemens busbar trunking systems SIVACON 8PS, which provide reliable and safe power transportation and distribution from 25A to 6,300A. The systems include the CD-K, BD01, BD2, LD, LX, and LR systems. They offer flexibility, easy planning and installation, and safety through type-tested low-voltage switchboard and controlgear assemblies. The modular systems allow for modifications and expansions to power distribution.
O documento descreve os padrões de cabos Ethernet 10/100 e como conectar cabos de rede ao conector RJ45. Detalha os padrões 568A e 568B para a ordem dos pares de fios dentro do conector e explica que o padrão crossover é usado para conectar dispositivos diretamente sem um hub. Recomenda-se não exceder 80 metros de comprimento do cabo e usar cabos blindados para instalações com possibilidade de interferência eletromagnética.
Miniature circuit breakers (MCBs) and residual current circuit breakers (RCCBs) provide overcurrent protection for electrical circuits. MCBs are thermal and magnetic switches that automatically break circuits during short circuits or overloads to protect wiring and devices. RCCBs detect residual current leakage to ground and disconnect power to prevent electric shock. There are different types of each for various applications based on trip characteristics and number of poles. Both provide important safety functions and find widespread use in homes, businesses, and industry.
This document describes the design and components of a laser-based security alarm system. The system uses a laser beam to create an invisible boundary around an area being protected. If an intruder breaks the laser beam, a buzzer will sound the alarm. The system is inexpensive yet effective for protecting buildings and areas from intruders. It uses a laser transmitter, receiver, resistor, transistor, breadboard, batteries, and buzzer.
This document discusses the estimation and costing of domestic and industrial wiring. It covers types of wiring, factors to consider in wiring selection, importance of layout planning, sub-circuiting, standard wire sizes, looping, testing procedures before commissioning, and processes for estimating costs of domestic and industrial wiring projects. Key steps for domestic wiring estimation include drawing layout plans, calculating electrical loads, determining circuits and sub-circuits, selecting wires and accessories, and calculating material and labor costs.
This document provides an overview of a catalog that contains technical information on overhead conductors and electrical power cables up to 220 kV. The catalog helps customers select suitable cables based on factors like voltage, current rating, short circuit current, weight and dimensions. Standards from organizations like IEC and BS that relate to power cables are also listed.
The document discusses lightning arresters, including their working principle, types, and advantages/disadvantages. Lightning arresters protect electrical equipment by diverting high voltage surges from lightning strikes or nearby objects to ground. They break down at a preset voltage to provide a path of least resistance to ground. Common types include rod gap, sphere gap, horn gap, and metal oxide arresters. Lightning arresters help reduce property damage and protect outdoor substation equipment and power lines from damage from lightning strikes. However, they require more space and have a higher installation cost than some alternatives.
This document discusses the manufacturing of electrical switches. It describes the basic components and types of switches, including one-way, two-way, intermediate, and push button switches. The manufacturing process involves molding the switch housing, installing a conducting toggling element, and fixing terminals. Raw materials include molding powder, screws, terminals, springs, and packaging materials. Machinery such as molding machines, molds, buffer machines, and testing machines are used. Advantages of switches include increased network bandwidth and performance, while disadvantages include higher costs and difficulty tracing network issues.
The document describes Siemens busbar trunking systems SIVACON 8PS, which provide reliable and safe power transportation and distribution from 25A to 6,300A. The systems include the CD-K, BD01, BD2, LD, LX, and LR systems. They offer flexibility, easy planning and installation, and safety through type-tested low-voltage switchboard and controlgear assemblies. The modular systems allow for modifications and expansions to power distribution.
O documento descreve os padrões de cabos Ethernet 10/100 e como conectar cabos de rede ao conector RJ45. Detalha os padrões 568A e 568B para a ordem dos pares de fios dentro do conector e explica que o padrão crossover é usado para conectar dispositivos diretamente sem um hub. Recomenda-se não exceder 80 metros de comprimento do cabo e usar cabos blindados para instalações com possibilidade de interferência eletromagnética.
Miniature circuit breakers (MCBs) and residual current circuit breakers (RCCBs) provide overcurrent protection for electrical circuits. MCBs are thermal and magnetic switches that automatically break circuits during short circuits or overloads to protect wiring and devices. RCCBs detect residual current leakage to ground and disconnect power to prevent electric shock. There are different types of each for various applications based on trip characteristics and number of poles. Both provide important safety functions and find widespread use in homes, businesses, and industry.
This document describes the design and components of a laser-based security alarm system. The system uses a laser beam to create an invisible boundary around an area being protected. If an intruder breaks the laser beam, a buzzer will sound the alarm. The system is inexpensive yet effective for protecting buildings and areas from intruders. It uses a laser transmitter, receiver, resistor, transistor, breadboard, batteries, and buzzer.
This document discusses the estimation and costing of domestic and industrial wiring. It covers types of wiring, factors to consider in wiring selection, importance of layout planning, sub-circuiting, standard wire sizes, looping, testing procedures before commissioning, and processes for estimating costs of domestic and industrial wiring projects. Key steps for domestic wiring estimation include drawing layout plans, calculating electrical loads, determining circuits and sub-circuits, selecting wires and accessories, and calculating material and labor costs.
This document provides an overview of a catalog that contains technical information on overhead conductors and electrical power cables up to 220 kV. The catalog helps customers select suitable cables based on factors like voltage, current rating, short circuit current, weight and dimensions. Standards from organizations like IEC and BS that relate to power cables are also listed.
The document discusses lightning arresters, including their working principle, types, and advantages/disadvantages. Lightning arresters protect electrical equipment by diverting high voltage surges from lightning strikes or nearby objects to ground. They break down at a preset voltage to provide a path of least resistance to ground. Common types include rod gap, sphere gap, horn gap, and metal oxide arresters. Lightning arresters help reduce property damage and protect outdoor substation equipment and power lines from damage from lightning strikes. However, they require more space and have a higher installation cost than some alternatives.
The document provides information about networking cables and their uses. It discusses:
- IP addresses and how they uniquely identify devices on the internet.
- Common cable types like twisted pair, coaxial, and fiber optic cables. It provides details on their characteristics and uses.
- Guidelines for properly installing cables, such as labeling, separation from interference, and using cable protectors on floor cables.
Magnetic contactors and magnetic starters ms-t series dienhathe.orgDien Ha The
1) Mitsubishi Electric has produced magnetic contactors and starters since 1933 and continues to push boundaries with new product developments.
2) The new slimline MS-T series is up to 16% smaller than previous models, allowing for space savings in switchboard downsizing.
3) The MS-T series has lower power consumption coils that can be directly driven by PLC outputs, integrated terminal covers for safety and wiring efficiency, and compliance with main international safety standards.
Catalog busbar ls 06. busduct presentation e series rev 2Dien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
This document summarizes different types of switches, including mechanical and electronic switches. It describes mechanical switches such as single pole single throw (SPST), single pole double throw (SPDT), double pole single throw (DPST), double pole double throw (DPDT), push button, toggle, limit, float, flow, pressure, temperature, and joystick switches. It also briefly discusses electronic switches that use semiconductors like bipolar transistors, power diodes, MOSFETs, IGBTs, SCRs, TRIACs, DIACs, and GTO thyristors.
O documento descreve os principais tipos de cabos e meios de transmissão de dados, incluindo cabos de pares trançados, cabos coaxiais, fibras ópticas monomodo e multimodo, transmissão sem fio via ondas de rádio, infravermelho e laser, e as características de cada um.
Este documento discute os diferentes tipos de cabos usados em redes de computadores, incluindo cabos de pares entrelaçados, coaxiais e de fibra óptica. Ele explica como cada tipo funciona e quais aplicações são mais adequadas, como cabos de pares para redes locais e fibra óptica para redes de longa distância.
This document discusses low voltage cables. It provides details on the components of single core and triple core cables, including the conductor, insulator, filler material, linking belt, cover and external protection. It discusses factors to consider when choosing a cable, such as load properties, rated voltage, conductor cross-sectional area, installation method and environment. The document also outlines some key tests performed on cables, including dimensional measurements, resistance and capacitance of the insulator, and high voltage tests.
This document summarizes a presentation on a smart digital door lock system for home automation. It discusses the digital door lock system which uses ZigBee wireless technology. It then explains why ZigBee is used and describes the benefits of a home automation system. It outlines the operation of the smart digital door lock in centralized and emergency modes and describes the automatic, manual, outgoing, incoming and emergency modes of operation. Finally, it lists some advantages of the system such as low cost, ease of use, and flexibility.
O documento discute os principais tipos de cabos usados em cabeamento estruturado, incluindo cabo de par trançado (UTP e STP), cabo de fibra óptica e as categorias CAT5 e CAT5e. Ele também explica os padrões EIA / TIA-568 para cabeamento estruturado.
The document discusses electrical safety hazards and protections. It notes that on average, one worker is electrocuted each day due to electrical injuries like electrocution, shocks, burns or falls. It describes the different types of electrical hazards like inadequate wiring, exposed live parts, ungrounded systems, and overloaded circuits. The document recommends protective measures like proper grounding, using GFCIs and circuit breakers, guarding live parts, safe flexible cord use, training, and following other electrical safety requirements to prevent injuries from electrical hazards.
Miniature Circuit Breakers (MCBs) provide overcurrent protection in electrical circuits. MCBs have replaced traditional fuses in many applications. MCBs have three main components: a thermal unit to sense overloads, a magnetic unit to sense short circuits, and arc chutes to suppress arcs. When too much current flows, the bimetal in the thermal unit bends and trips the circuit. For short circuits, a magnetic field trips the circuit. MCBs can be reset by flipping the switch after a fault is corrected, while fuses must be replaced. MCBs are more compact, reusable, and provide easier fault identification than fuses.
The document discusses earth leakage, earth leakage circuit breakers (ELCBs), and their types and functions. It defines earth leakage as electrical current flowing unintentionally from a live conductor to earth. ELCBs detect this leakage current and disconnect the power supply to prevent electric shock. There are two main types: voltage-based ELCBs and current-based ELCBs (RCCBs). RCCBs are now preferred over voltage ELCBs as they can detect any type of leakage current and provide better protection against electric shock. ELCBs are used to protect electrical systems from faults and shocks caused by current leakage.
This document describes an automatic temperature-controlled fan project using an Arduino Uno microcontroller. The fan will automatically turn on when the temperature reaches 35°C as measured by a temperature sensor, and will turn off again when the temperature drops below 35°C, in order to regulate the environment and reduce energy consumption. The system includes an Arduino, temperature sensor, LCD display, DC motor fan, battery power source, and connecting wires. Potential applications include use in homes and industries to assist people and save electricity by automating fan control based on temperature changes.
1 residual current circuit breaker (rccb) ( elcb)nikeshdubey
Residual current circuit breakers (RCCBs), also known as ground fault circuit interrupters (GFCIs), detect ground faults and disconnect power to prevent electric shock. RCCBs use a core balance transformer and relay to sense minor differences in current between live and neutral wires, indicating a ground fault. They provide protection against direct and indirect contact with live parts. RCCBs must disconnect power within 40 milliseconds of detecting a ground fault of 30mA or more, as required by safety regulations. Types are available for domestic, industrial, and commercial applications to protect against electric shocks.
The wiring harness is basically defined as a central nervous system of the car which is used for connecting a variety of components. As it is an organized set of wires, connectors, and terminals that would be run throughout the car and relays the information as well as the electric power. For performing the advanced functionality in the car, the wiring harness contains electrical and electronic components and interlink them. If you want to know about the things related to the wiring harness and its basic uses, then go through the following slides.
Shrink Polymer Systems high voltage (HV) heat shrink cable joints, cable terminations and busbar tape and tubings for 6.6kV, 11kV, 24kV and 33kV.
SPS HV Cable Joints - Straight, transition, pot-end, trifurcating and branch cable joints for both polymeric and paper cables, 11kV-33kV.
SPS HV Cable Terminations - Single and 3 core, indoor and outdoor high voltage cable terminations for both polymeric and paper cables, 11kV-33kV.
SPS 6.6kV, 11kV and 33kV heat shrink cable joint kits and cable termination kits are quick and easy to install by trained HV jointers providing high reliability and excellent performance for high voltage cable circuits. SPS heat shrink cable termination and joint kits are suitable for three and single core XLPE, EPR and PILC cables, including utility specification Triplex cables 11kV-33kV.
SPS heat shrink cable joints and cable terminations are Tested to International Standards outlined in Cenelec HD 628 S1 and 629.1 S2 : 2006 - encompassing VDE 0278 and IEC 60502 - peace of mind performance.
THORNE & DERRICK UK are Exclusive UK Distributors for SPS Shrink Polymer Systems. T&D SPS provide the most competitive prices, largest stocks and first class service for LV-HV cable joints, cable terminations and accessories up to 33kV.
Tested to Cenelec, VDE, IEC Standards - save time and money without compromising high voltage cable installations.
T&D supply LV-HV Cable Accessories, Cable Jointing & Electrical Eqpt - we service UK and global contractors involved in cable installations, cable jointing, substation and electrical construction at LV, 11kV, 33kV and EHV. We export to utilities, power, construction, rail, mining, offshore, oil, gas and petrochemical industries.
This document discusses smart door lock systems. It provides information on how smart locks work using wireless protocols and cryptographic keys to send signals from a device to lock and unlock doors. It also discusses the main functionality of smart locks using Bluetooth and WiFi to open and close doors remotely. Additionally, it covers smart lock access control systems which use a lock controller, smartphone, and cloud to authorize access and command locks to open. It also addresses common smart lock problems such as not locking/unlocking, lights/sounds not working, and accelerometers malfunctioning, and provides potential solutions.
This document describes an automatic street light control circuit using an LDR (Light Dependent Resistor). The circuit uses an LM358 operational amplifier, a relay, an LDR, resistors, a capacitor, a transistor, and a lamp. It works by turning the street light on when the LDR detects low light levels and turning it off when high light levels are detected, thereby automatically controlling the street light and saving energy. The circuit was designed and simulated using Proteus software and implemented on a breadboard.
1. The RIM executive meeting discussed the need to shift their focus to the consumer market and data services as smartphone users are increasingly using data and applications.
2. They proposed developing a new handset designed for consumer needs and data usage rather than mimicking competitors.
3. The team also suggested partnering with carriers to provide an efficient data service for consumers and launching an advertising campaign to change perceptions of RIM as an enterprise-focused company.
Shenzhen Tongher Technology Co., Ltd is a supplier of electric fence energizers and accessories for perimeter security and agriculture. They have exported their products to over 50 countries. Their electric fence systems use high voltage pulses to deter intruders from crossing boundaries. The systems include fencing, energizers, communication, and control components. Energizers power the fence and can integrate with other security devices. Electric fences provide cost-effective security and easy installation and maintenance.
The document provides information about networking cables and their uses. It discusses:
- IP addresses and how they uniquely identify devices on the internet.
- Common cable types like twisted pair, coaxial, and fiber optic cables. It provides details on their characteristics and uses.
- Guidelines for properly installing cables, such as labeling, separation from interference, and using cable protectors on floor cables.
Magnetic contactors and magnetic starters ms-t series dienhathe.orgDien Ha The
1) Mitsubishi Electric has produced magnetic contactors and starters since 1933 and continues to push boundaries with new product developments.
2) The new slimline MS-T series is up to 16% smaller than previous models, allowing for space savings in switchboard downsizing.
3) The MS-T series has lower power consumption coils that can be directly driven by PLC outputs, integrated terminal covers for safety and wiring efficiency, and compliance with main international safety standards.
Catalog busbar ls 06. busduct presentation e series rev 2Dien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
This document summarizes different types of switches, including mechanical and electronic switches. It describes mechanical switches such as single pole single throw (SPST), single pole double throw (SPDT), double pole single throw (DPST), double pole double throw (DPDT), push button, toggle, limit, float, flow, pressure, temperature, and joystick switches. It also briefly discusses electronic switches that use semiconductors like bipolar transistors, power diodes, MOSFETs, IGBTs, SCRs, TRIACs, DIACs, and GTO thyristors.
O documento descreve os principais tipos de cabos e meios de transmissão de dados, incluindo cabos de pares trançados, cabos coaxiais, fibras ópticas monomodo e multimodo, transmissão sem fio via ondas de rádio, infravermelho e laser, e as características de cada um.
Este documento discute os diferentes tipos de cabos usados em redes de computadores, incluindo cabos de pares entrelaçados, coaxiais e de fibra óptica. Ele explica como cada tipo funciona e quais aplicações são mais adequadas, como cabos de pares para redes locais e fibra óptica para redes de longa distância.
This document discusses low voltage cables. It provides details on the components of single core and triple core cables, including the conductor, insulator, filler material, linking belt, cover and external protection. It discusses factors to consider when choosing a cable, such as load properties, rated voltage, conductor cross-sectional area, installation method and environment. The document also outlines some key tests performed on cables, including dimensional measurements, resistance and capacitance of the insulator, and high voltage tests.
This document summarizes a presentation on a smart digital door lock system for home automation. It discusses the digital door lock system which uses ZigBee wireless technology. It then explains why ZigBee is used and describes the benefits of a home automation system. It outlines the operation of the smart digital door lock in centralized and emergency modes and describes the automatic, manual, outgoing, incoming and emergency modes of operation. Finally, it lists some advantages of the system such as low cost, ease of use, and flexibility.
O documento discute os principais tipos de cabos usados em cabeamento estruturado, incluindo cabo de par trançado (UTP e STP), cabo de fibra óptica e as categorias CAT5 e CAT5e. Ele também explica os padrões EIA / TIA-568 para cabeamento estruturado.
The document discusses electrical safety hazards and protections. It notes that on average, one worker is electrocuted each day due to electrical injuries like electrocution, shocks, burns or falls. It describes the different types of electrical hazards like inadequate wiring, exposed live parts, ungrounded systems, and overloaded circuits. The document recommends protective measures like proper grounding, using GFCIs and circuit breakers, guarding live parts, safe flexible cord use, training, and following other electrical safety requirements to prevent injuries from electrical hazards.
Miniature Circuit Breakers (MCBs) provide overcurrent protection in electrical circuits. MCBs have replaced traditional fuses in many applications. MCBs have three main components: a thermal unit to sense overloads, a magnetic unit to sense short circuits, and arc chutes to suppress arcs. When too much current flows, the bimetal in the thermal unit bends and trips the circuit. For short circuits, a magnetic field trips the circuit. MCBs can be reset by flipping the switch after a fault is corrected, while fuses must be replaced. MCBs are more compact, reusable, and provide easier fault identification than fuses.
The document discusses earth leakage, earth leakage circuit breakers (ELCBs), and their types and functions. It defines earth leakage as electrical current flowing unintentionally from a live conductor to earth. ELCBs detect this leakage current and disconnect the power supply to prevent electric shock. There are two main types: voltage-based ELCBs and current-based ELCBs (RCCBs). RCCBs are now preferred over voltage ELCBs as they can detect any type of leakage current and provide better protection against electric shock. ELCBs are used to protect electrical systems from faults and shocks caused by current leakage.
This document describes an automatic temperature-controlled fan project using an Arduino Uno microcontroller. The fan will automatically turn on when the temperature reaches 35°C as measured by a temperature sensor, and will turn off again when the temperature drops below 35°C, in order to regulate the environment and reduce energy consumption. The system includes an Arduino, temperature sensor, LCD display, DC motor fan, battery power source, and connecting wires. Potential applications include use in homes and industries to assist people and save electricity by automating fan control based on temperature changes.
1 residual current circuit breaker (rccb) ( elcb)nikeshdubey
Residual current circuit breakers (RCCBs), also known as ground fault circuit interrupters (GFCIs), detect ground faults and disconnect power to prevent electric shock. RCCBs use a core balance transformer and relay to sense minor differences in current between live and neutral wires, indicating a ground fault. They provide protection against direct and indirect contact with live parts. RCCBs must disconnect power within 40 milliseconds of detecting a ground fault of 30mA or more, as required by safety regulations. Types are available for domestic, industrial, and commercial applications to protect against electric shocks.
The wiring harness is basically defined as a central nervous system of the car which is used for connecting a variety of components. As it is an organized set of wires, connectors, and terminals that would be run throughout the car and relays the information as well as the electric power. For performing the advanced functionality in the car, the wiring harness contains electrical and electronic components and interlink them. If you want to know about the things related to the wiring harness and its basic uses, then go through the following slides.
Shrink Polymer Systems high voltage (HV) heat shrink cable joints, cable terminations and busbar tape and tubings for 6.6kV, 11kV, 24kV and 33kV.
SPS HV Cable Joints - Straight, transition, pot-end, trifurcating and branch cable joints for both polymeric and paper cables, 11kV-33kV.
SPS HV Cable Terminations - Single and 3 core, indoor and outdoor high voltage cable terminations for both polymeric and paper cables, 11kV-33kV.
SPS 6.6kV, 11kV and 33kV heat shrink cable joint kits and cable termination kits are quick and easy to install by trained HV jointers providing high reliability and excellent performance for high voltage cable circuits. SPS heat shrink cable termination and joint kits are suitable for three and single core XLPE, EPR and PILC cables, including utility specification Triplex cables 11kV-33kV.
SPS heat shrink cable joints and cable terminations are Tested to International Standards outlined in Cenelec HD 628 S1 and 629.1 S2 : 2006 - encompassing VDE 0278 and IEC 60502 - peace of mind performance.
THORNE & DERRICK UK are Exclusive UK Distributors for SPS Shrink Polymer Systems. T&D SPS provide the most competitive prices, largest stocks and first class service for LV-HV cable joints, cable terminations and accessories up to 33kV.
Tested to Cenelec, VDE, IEC Standards - save time and money without compromising high voltage cable installations.
T&D supply LV-HV Cable Accessories, Cable Jointing & Electrical Eqpt - we service UK and global contractors involved in cable installations, cable jointing, substation and electrical construction at LV, 11kV, 33kV and EHV. We export to utilities, power, construction, rail, mining, offshore, oil, gas and petrochemical industries.
This document discusses smart door lock systems. It provides information on how smart locks work using wireless protocols and cryptographic keys to send signals from a device to lock and unlock doors. It also discusses the main functionality of smart locks using Bluetooth and WiFi to open and close doors remotely. Additionally, it covers smart lock access control systems which use a lock controller, smartphone, and cloud to authorize access and command locks to open. It also addresses common smart lock problems such as not locking/unlocking, lights/sounds not working, and accelerometers malfunctioning, and provides potential solutions.
This document describes an automatic street light control circuit using an LDR (Light Dependent Resistor). The circuit uses an LM358 operational amplifier, a relay, an LDR, resistors, a capacitor, a transistor, and a lamp. It works by turning the street light on when the LDR detects low light levels and turning it off when high light levels are detected, thereby automatically controlling the street light and saving energy. The circuit was designed and simulated using Proteus software and implemented on a breadboard.
1. The RIM executive meeting discussed the need to shift their focus to the consumer market and data services as smartphone users are increasingly using data and applications.
2. They proposed developing a new handset designed for consumer needs and data usage rather than mimicking competitors.
3. The team also suggested partnering with carriers to provide an efficient data service for consumers and launching an advertising campaign to change perceptions of RIM as an enterprise-focused company.
Shenzhen Tongher Technology Co., Ltd is a supplier of electric fence energizers and accessories for perimeter security and agriculture. They have exported their products to over 50 countries. Their electric fence systems use high voltage pulses to deter intruders from crossing boundaries. The systems include fencing, energizers, communication, and control components. Energizers power the fence and can integrate with other security devices. Electric fences provide cost-effective security and easy installation and maintenance.
The document discusses security issues with internal networks and proposes a security switch solution from HanDreamnet. It notes that 80% of breaches come from internal traffic but most perimeter security like firewalls only protect from external threats. The security switch aims to detect and block harmful internal traffic in real-time without impacting regular traffic. It uses proprietary technology to analyze network traffic on multiple dimensions and identify attacks like denial of service, spoofing, and advanced persistent threats. The document compares the security switch's features to regular switches and other vendor solutions.
The document provides background information on August Wilson's play Fences. It discusses the play's successful Broadway run in 1987 and critical acclaim. It also provides biographical details about Wilson, describing his upbringing in Pittsburgh and career as a playwright. Fences is part of Wilson's ten-play Pittsburgh Cycle exploring the 20th century African American experience.
Solar Power Fence, Solar Power Fencing, Electric Fence, Power Fencing, Security Power Fencing, A1 Security Power Fencing, 24 Hours High Security Power Fencing, High Security Power Fence, Boundary Power Fencing, Security Systems, Solar LED Street Lighting Systems, Solar Lanterns, Solar Modules, Solar Power Packs, Solar Home Systems, Solar Water Heaters, Solar Products, Fence Systems, Fencing Systems, Fence Components, Fencing Wire, Security Fencing, Power Systems
This document discusses physical security for protecting enterprise resources including people, data, and facilities. It covers assessing threats and vulnerabilities, choosing a secure site location, designing security for the building structure and environment, implementing physical and administrative controls, and ensuring life safety measures like fire detection and suppression. Key considerations include perimeter security, access control, environmental factors, emergency procedures, and compliance with standards to help ensure security.
The document provides information on burglar and fire alarm systems. It discusses the basic components of a security system, including the control panel, keypads, zones, and input devices. It explains what zones are and how they are used to identify areas and signal types. Common zone wiring configurations and input devices for burglary alarms are also outlined.
This document describes a voice-controlled home automation project using an Arduino microcontroller and Bluetooth module. The system allows users to control home appliances like lights, fans, TVs and pumps with voice commands to the smartphone app. It is intended to help elderly and disabled people control their homes more easily. The document outlines the components, circuit diagram, working principle and steps to set up the voice commands for controlling different devices and relays. Potential improvements are also discussed, like adding more relays or using WiFi for wider range.
The Unitronics V350-35-RA22 micro-OPLC has 12 digital inputs, 8 relay outputs, and 2 analog outputs. It has a 3.5" color touchscreen and programmable function keys. Communication options include RS232, RS485, and Ethernet. The controller supports digital, analog, and temperature measurement I/Os. It can be programmed using the included VisiLogic software to create HMI screens and ladder logic programs.
PLC stands for programmable logic controller. It is a digital computer used to monitor inputs and control outputs of automated processes. Some key points:
- PLCs were introduced in the 1960s to replace relay-based control systems. They have since evolved to become more sophisticated.
- Common PLC manufacturers include Siemens, Allen-Bradley, Schneider Electric.
- PLCs use ladder logic programming to represent relay-based logic. Other common languages include function block diagram and statement list.
- PLC components include a power supply, CPU, I/O modules, and communication modules. Common applications include industrial automation and process control.
329292817-PLC-Training for new person pptxviveksingh2418
The document provides information about relays and contactors used in industrial automation. It discusses what relays and contactors are, their basic construction and operation. It provides examples of exercises using relays, including making a relay circuit to switch on a lamp when a push button is pressed. It also discusses the differences between relays and contactors, noting that contactors are used for switching larger electrical power loads.
This document provides information about a Z-Wave temperature and dry input sensor device. It can measure temperature and detect when dry contacts are opened or closed. The device needs to be included in a Z-Wave network to communicate and functions include temperature measurement, contact detection, wakeup intervals to save battery, and configuration parameters to customize settings.
bluetooth controlled home automation using arduino by shubham sinhaShubham Sinha
This document describes a home automation system using an Arduino Uno, Bluetooth module, relays, and an Android app. The system allows remote control of appliances via a smartphone. It provides a circuit diagram and lists the hardware used, including the Arduino, Bluetooth module, relays, power supply, and switchboard. Advantages are convenience and energy savings. Disadvantages include limited range and number of devices controlled. The document discusses problems faced and solutions, and possibilities for future expansion using WiFi.
Unlock full featured course with 250+ Video Lectures at 20% Discount for "Learn 5 PLC's in a Day" lifetime E-Learning course for 39 USD only: https://www.udemy.com/nfi-plc-online-leaning/?couponCode=slideshare2016
Enroll for Advanced Industrial Automation Training with PLC, HMI and Drive Combo with 300+ Video Lecture for 69.3 USD only: http://online.nfiautomation.org/catalog/1769?couponCode=LEARNING_MADE_EASY
This document provides information about the Danfoss Hydronic Controller 10, a Z-Wave device for controlling hot water underfloor heating systems. It can control up to 10 outputs and includes functions like pump control, heating/cooling, and individual room temperature control. The document explains how to include the controller in a Z-Wave network and configure its settings, and provides the device's technical specifications.
Aditgroup present the different fire alarm detector for the security purpose. Here user gets the Duel Heat detector, Manual call point, Smoke Alarm, Optical smoke detector etc.
Programmable Logic Controller by Pranoti R. DokePranoti Doke
The document provides an overview of programmable logic controllers (PLCs). It discusses that a PLC is a digital computer used for industrial control systems. The major components of a PLC include a processor, input and output modules, power supply, and a programming device. It then explains the basic operational sequence of a PLC which involves input scanning, logic processing, and output scanning. Additional topics covered include ladder logic, examples of controlling motors, advantages and disadvantages of PLCs, and their applications in industry.
The document discusses using an Arduino to control high power devices through relays since the Arduino output is only 5V, while relays can switch voltages above 5V; it describes the components needed including the Arduino, 5V relay, high power device, and resistor; and provides details on single channel, 2 channel, and 4 channel relays that can be controlled by the Arduino through low voltage signals to switch high voltages.
Programmable logic controllers (PLCs) and programmable automation controllers (PACs) are used in automation control systems to operate industrial machines and processes. The basic components of a PLC system include a PLC processor, input/output modules, a chassis or backplane, a power supply, and programming software. Additional components often include a network interface to allow communication between the PLC and other devices like operator terminals, networks, and distributed input/output modules located remotely from the PLC. PLCs are installed in enclosures and act as the central controller in broader automation control systems.
Programmable logic controllers (PLCs) and programmable automation controllers (PACs) are used in automation control systems to operate industrial machines and processes. The basic components of a PLC system include a PLC processor, input/output modules, a chassis or backplane, a power supply, and programming software. Additional components often include a network interface to allow communication between the PLC and other devices like operator terminals, networks, and distributed input/output modules located remotely from the PLC. PLCs are installed in enclosures and act as the central controller in broader automation control systems.
Programmable logic controllers (PLCs) and programmable automation controllers (PACs) are used in automation control systems to operate industrial machines and processes. The basic components of a PLC system include a PLC processor, input/output modules, a chassis or backplane, a power supply, and programming software. Additional components often include a network interface to allow communication between the PLC and other devices like operator terminals and distributed I/O devices. PLCs are installed in enclosures and act as the central controller in broader automation control systems.
The document discusses sensor communication and data acquisition systems. It explains that sensors can be either analog or digital, and microcontrollers can only process digital data, so analog sensors require analog-to-digital conversion. It also describes different types of sensor ports on microcontrollers for interfacing analog sensors and digital I/O, as well as methods for serial communication, timing functions, and motor control. Finally, it provides an overview of the basic components and structure of a data acquisition system for collecting and processing sensor measurements.
This document describes a project to control electrical appliances in a home remotely using a microcontroller and PC. A microcontroller like the AT89S52 is used to interface with devices via relays and receive commands from a PC through an RS-232 serial connection. The MAX232 chip converts signals between the RS-232 and microcontroller levels. Based on commands from the PC, the microcontroller can turn appliances on and off and send back status updates. This allows remote control and monitoring of devices for applications like smart homes and industrial automation.
This document describes a password based on/off circuit breaker project. The project uses a microcontroller, keypad, LCD, and relay to allow line workers to safely turn power lines on and off by entering a password. This prevents electrical accidents by ensuring the power is off when workers are repairing lines. The system requires line workers to enter the password at the substation to turn a circuit on or off before working on electrical lines. The project aims to increase safety for line workers through access control and communication between the substation and maintenance staff.
Aditgroup present the different fire alarm detector for the security purpose. Here user gets the Duel Heat detector, Manual call point, Smoke Alarm, Optical smoke detector etc.
Gender and Mental Health - Counselling and Family Therapy Applications and In...PsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
The chapter Lifelines of National Economy in Class 10 Geography focuses on the various modes of transportation and communication that play a vital role in the economic development of a country. These lifelines are crucial for the movement of goods, services, and people, thereby connecting different regions and promoting economic activities.
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...PECB
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Leveraging Generative AI to Drive Nonprofit InnovationTechSoup
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
3. NO/NC output
• The most common integration for security products,such as
DVR,alarm system,digital map,etc
• NO/NC means normally open or normally close
• There are three pins on NO/NC port:NO,COM,NC
4. How it works
• You can integrate any security products only if there has
NO/NC port(Alarm in)
• In normal situation,the circuit will be open(close),but when
there is alarm,it will be close(open) to trigger other security
products.
• The main function of NO/NC is trigger,through open/close to
trigger other security products.
• It can not be used as a specific tool to control the energizer or
other security products(i.e,when connected to alarm
system,when the electric fence wire is cut,the alarm system will
receive the alarm signal from the energizer,but you can not
control it)
8. • Every integration plate can integrate 8
devices,can upgrade to 32 devices max.
• Usually used in sensor and cctv integration
• Convert RS485 to NO/NC to trigger
9. DC12V output
DC12V output can integrate any security products below 10W,such as siren,speaker.
Simply connect the siren or light to the DC12V port
Light
Integration of siren and light
10. Thanks!!
• Any more question,please contact us
for detail.
• Dragon@tonghertech.com
• Tel:+86-755-23710212
Shenzhen Tongher Technology Co.,Ltd www.tonghertech.com