The document describes the P-Series liftrucks from Hoist Liftruck. The P-Series is designed as a heavy-duty grade liftruck using premium components. It comes in a variety of capacities from 22,000 to 115,000 pounds. The liftrucks utilize components from brands like Cummins, Dana, AxleTech, and Parker Hannifin. The P-Series is designed for operator comfort, visibility, and ease of maintenance. Hoist prides itself on providing reliable, durable liftrucks with competitive prices and superior after-sales service and support.
Fired Heaters-Key to Efficient Operation of Refineries and PetrochemicalsAshutosh Garg
Fired Heaters are a critical to successful operation of refineries and petrochemical plants. They are a major energy consumer as well as a major source of air pollution. There are also concerns about the run length of the heaters as well safety issues.
Process Heaters, Furnaces and Fired Heaters: Improving Efficiency and Reducin...Belilove Company-Engineers
A process heater is a direct-fired heat exchanger that uses the hot gases of combustion to raise the temperature of a feed owing through coils of tubes aligned throughout the heater. Depending on the use, these are also called furnaces or red heaters. Some heaters simply deliver the feed at a predetermined temperature to the next stage of the reaction process; others perform reactions on the feed while it travels through the tubes.
Fired Heaters-Key to Efficient Operation of Refineries and PetrochemicalsAshutosh Garg
Fired Heaters are a critical to successful operation of refineries and petrochemical plants. They are a major energy consumer as well as a major source of air pollution. There are also concerns about the run length of the heaters as well safety issues.
Process Heaters, Furnaces and Fired Heaters: Improving Efficiency and Reducin...Belilove Company-Engineers
A process heater is a direct-fired heat exchanger that uses the hot gases of combustion to raise the temperature of a feed owing through coils of tubes aligned throughout the heater. Depending on the use, these are also called furnaces or red heaters. Some heaters simply deliver the feed at a predetermined temperature to the next stage of the reaction process; others perform reactions on the feed while it travels through the tubes.
All valves require proper care and maintenance,as does other more complex equipment, to ensure theyare kept in optimum working order. The principledifficulties encountered with valves are leakage pastthe seat and disk, leakage at the stuffing box, stickingvalve stems, and loose valve disks.
Air Cooled Heat Exchanger Design
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 SUITABILITY FOR AIR COOLING
4.1 Options Available For Cooling
4.2 Choice of Cooling System
5 SPECIFICATION OF AN AIR COOLED HEAT
EXCHANGER
5.1 Description and Terminology
5.2 General
5.3 Thermal Duty and Design Margins
5.4 Process Pressure Drop
5.5 Design Ambient Conditions
5.6 Process Physical Properties
5.7 Mechanical Design Constraints
5.8 Arrangement
5.9 Air Side Fouling
5.10 Economic Factors in Design
6 CONTROL
7 PRESSURE RELIEF
8 ASSESSMENT OF OFFERS
8.1 General
8.2 Manual Checking Of Designs
8.3 Computer Assessment
8.4 Bid Comparison
9 FOULING AND CORROSION
9.1 Fouling
9.2 Corrosion
10 OPERATION AND MAINTENANCE
10.1 Performance Testing
10.2 Air-Side Cleaning
10.3 Mechanical Maintenance
10.4 Tube side Access
11 REFERENCES
This document addresses eye, face, head, hand, foot, torso, respiratory, noise, and fall protection. It will serve as the Personal Protective Equipment (PPE) Certification document required to satisfy the federal requirements of the Occupational Safety and Health Administration (OSHA) Standard, 29 CFR 1910.132 Subpart I‐ Personal Protective Equipment.
Steam ejector working principle
An ejector is a device used to suck the gas or vapour from the desired vessel or system. An ejector is similar to an of vacuum pump or compressor. The major difference between the ejector and the vacuum pump or compressor is it had no moving parts. Hence it is relatively low-cost and easy to operate and maintenance free equipment.
Fired heaters are used for heating hydrocarbons fluids in the refineries and petrochemical plants. They are used for high temperature heat transfer. In most fired heaters, we are burning fuel gas as source of heat . There are many heaters in the world where liquid fuel is also burnt in the fired heaters to provide the energy, but their number is decreasing due to tighter pollution laws. Heaters that are processing hydrocarbons services are prone to coking and cracking depending upon the nature of the hydrocarbons being processed. Typically heaters may run length of anywhere from 3 months for coking service to 6 years for different services. Heater designers and operators are always faced with the challenge of providing uniform heat transfer to all the tubes. Engineers use equations that assume uniform heat transfer to heater tubes When designing fired heaters. However, in reality, most fired heaters do not experience uniform heat transfer, and as a result, hot spots develop on the tubes. These hot spots cause coking inside the tubes which requires the heater be shutdown periodically to remove the coke and clean the tubes. Any shutdown to clean the tubes in a fired heater causes a substantial production loss. The owners want to extend the run length of fired heaters. Furnace Improvements has developed a new patented firing technology that provides uniform heat transfer to heater tubes. This technology can be applied to most fired heaters. Our patented technology reorients the burners at a slight angle away from the tubes. We are able to direct the hottest part of the flames and flue gases away from the tubes without affecting the heat transfer in any way. FIS has installed this in 5 heaters ranging from 14 MMBtu/hr. to 280 MMBtu/hr. The clients are experiencing significant reduction in tube metal temperatures. This is translating into lower coking rates and higher tube life. We have been able to increase the capacity of the heaters in most of the cases. In one of the case study that has been presented in this heater, the heater duty was increased from 14 MMBtu/hr. to 21 MMBtu/hr. Inclined firing improves the heat transfer to the tubes and makes in uniform.
This presentation gives a general idea on simulation in Aspen HYSYS software. It gives an knowledge on the selection of simulator and the selection of equation of states in simulators. It also gives a brief idea on the thermodynamics behind the simulators
All valves require proper care and maintenance,as does other more complex equipment, to ensure theyare kept in optimum working order. The principledifficulties encountered with valves are leakage pastthe seat and disk, leakage at the stuffing box, stickingvalve stems, and loose valve disks.
Air Cooled Heat Exchanger Design
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 SUITABILITY FOR AIR COOLING
4.1 Options Available For Cooling
4.2 Choice of Cooling System
5 SPECIFICATION OF AN AIR COOLED HEAT
EXCHANGER
5.1 Description and Terminology
5.2 General
5.3 Thermal Duty and Design Margins
5.4 Process Pressure Drop
5.5 Design Ambient Conditions
5.6 Process Physical Properties
5.7 Mechanical Design Constraints
5.8 Arrangement
5.9 Air Side Fouling
5.10 Economic Factors in Design
6 CONTROL
7 PRESSURE RELIEF
8 ASSESSMENT OF OFFERS
8.1 General
8.2 Manual Checking Of Designs
8.3 Computer Assessment
8.4 Bid Comparison
9 FOULING AND CORROSION
9.1 Fouling
9.2 Corrosion
10 OPERATION AND MAINTENANCE
10.1 Performance Testing
10.2 Air-Side Cleaning
10.3 Mechanical Maintenance
10.4 Tube side Access
11 REFERENCES
This document addresses eye, face, head, hand, foot, torso, respiratory, noise, and fall protection. It will serve as the Personal Protective Equipment (PPE) Certification document required to satisfy the federal requirements of the Occupational Safety and Health Administration (OSHA) Standard, 29 CFR 1910.132 Subpart I‐ Personal Protective Equipment.
Steam ejector working principle
An ejector is a device used to suck the gas or vapour from the desired vessel or system. An ejector is similar to an of vacuum pump or compressor. The major difference between the ejector and the vacuum pump or compressor is it had no moving parts. Hence it is relatively low-cost and easy to operate and maintenance free equipment.
Fired heaters are used for heating hydrocarbons fluids in the refineries and petrochemical plants. They are used for high temperature heat transfer. In most fired heaters, we are burning fuel gas as source of heat . There are many heaters in the world where liquid fuel is also burnt in the fired heaters to provide the energy, but their number is decreasing due to tighter pollution laws. Heaters that are processing hydrocarbons services are prone to coking and cracking depending upon the nature of the hydrocarbons being processed. Typically heaters may run length of anywhere from 3 months for coking service to 6 years for different services. Heater designers and operators are always faced with the challenge of providing uniform heat transfer to all the tubes. Engineers use equations that assume uniform heat transfer to heater tubes When designing fired heaters. However, in reality, most fired heaters do not experience uniform heat transfer, and as a result, hot spots develop on the tubes. These hot spots cause coking inside the tubes which requires the heater be shutdown periodically to remove the coke and clean the tubes. Any shutdown to clean the tubes in a fired heater causes a substantial production loss. The owners want to extend the run length of fired heaters. Furnace Improvements has developed a new patented firing technology that provides uniform heat transfer to heater tubes. This technology can be applied to most fired heaters. Our patented technology reorients the burners at a slight angle away from the tubes. We are able to direct the hottest part of the flames and flue gases away from the tubes without affecting the heat transfer in any way. FIS has installed this in 5 heaters ranging from 14 MMBtu/hr. to 280 MMBtu/hr. The clients are experiencing significant reduction in tube metal temperatures. This is translating into lower coking rates and higher tube life. We have been able to increase the capacity of the heaters in most of the cases. In one of the case study that has been presented in this heater, the heater duty was increased from 14 MMBtu/hr. to 21 MMBtu/hr. Inclined firing improves the heat transfer to the tubes and makes in uniform.
This presentation gives a general idea on simulation in Aspen HYSYS software. It gives an knowledge on the selection of simulator and the selection of equation of states in simulators. It also gives a brief idea on the thermodynamics behind the simulators
Breaker Technology’s MINE RUNNER All Purpose Vehicle is a modern day solution for a future focused mining operation, aimed at safety, lower emissions, and increased productivity. Not to be confused with a customized road vehicle or generic people carrier, the Mine Runner has Hydraulic Wheel Drive (HWD) motors, providing greater power, and extended maintenance and duty cycles.
Engineered from the grounbti mine runner undergroundd up to be a leader in personnel safety and operational flexibility. Standard on the Mine Runner is a rigorously tested and independently certified ROPS/FOPS operator cabin.
“The ever increasing payload requirements and tramming distances have exceeded the capabilities of the typical re purposed highway 4x4 style truck. Unlike many over the road type vehicles being modified for use underground, the Mine Runner is purpose designed and built for the underground environment,” say Andy Jackson, BTI Engineering Project Leader, Mobile Equipment Systems.
Both the primary braking (service brakes) and the secondary braking (emergency brakes) have been designed and tested to meet and exceed the CSA Braking Standard and Performance for Underground Mining Machines. CAN/CSA - M424.3-M90.
Powered by our innovative “Hydraulic Wheel Drive” or “HWD” fluid controlled power train, the Mine Runner is capable of easy customization to a optional configurations without hindering performance or longevity of components.
BTI - Breaker Technology is a manufacturer of quarry, construction and mining equipment. We specialize in rockbreaker systems, hydraulic breakers, demolition attachments and a full line of rugged, low profile mining vehicles. Well recognized as a leader in global mining and quarry markets, BTI offers unparalleled experience and product support.
catalogo 390 d
Alto nivel de producción sostenida, mejorado.
Incremento de rendimiento, fiabilidad y durabilidad.
Su productividad y disminuir sus costos operativos.
Jost’s Electric Stacker are Ideal, simple & effective solutions for stacking & vertical storage space in warehouses & are used in the widest range of app.
Systems Focused Product Development Of The HypercarDavid F. Taggart
The Hypercar company and the Hypercar program are used as an example of how systems integration can be a focus and key enabler in challenging product development efforts
2. The P-Series is the premiere liftruck for all of your heavy-duty lifting needs. At competitive prices, the
P-Series comes STANDARD as a heavy-duty grade liftruck utilizing only premium components and advanced
features such as; Cummins diesel engine, Dana transmission, AxleTech drive axle, electronic fingertip hydraulic
controls and Remote Tech vehicle management system.
Model Basic Capacity Load Center Wheel Base
P220-360S 22,000-36,000 lbs 24” 115”
P280-360@48 28,000-36,000 lbs 24”-48” 136”
P400@48-P450@48 40,000 lbs-45,000 lbs 36”-48” 144”
P450@36-P550@48 45,000-55,000 lbs 36”- 48” 170”
P600@48-P720@48 60,000 lbs-72,000 lbs. 48” 174”
P800@48 80,000 lbs 48” 190”
P900@48-P1150 90,000 lbs-115,000 lbs. 48” 225”
www. h o i s t l i f t . c o m
3. INNOVATIVE DESIGN Not only is the P-Series extremely eye-appealing, it has been designed and tested to meet or exceed current,
worldwide regulations for stability, sound levels and safety.
Hoist’s design engineers utilize the latest CAD three-dimensional solid modeling technology to develop the
highest quality liftruck in terms of performance, durability, operator safety, comfort, visibility and serviceability.
Hoist uses many of the same North American components throughout its product lines to keep costs low and
make parts immediately available 24-hours a day.
Lights
J.W. Speaker
Germantown, Wisconsin
United States
Diesel Engine Components
Cummins
Fridley, MN
United States
Radiator
Indiana Heat Transfer
Glendale Heights, Illinois
United States
Capacity - 36,000 lbs. Capacity - 52,000 lbs. Capacity - 65,000 lbs.
www. h o i s t l i f t . c o m
Mast, Cylinders & Carriage
Hoist Liftruck
Bedford Park, Illinois
United States
Chassis
Hoist Liftruck
Bedford Park, Illinois
United States
Transmission Components
Dana Corporation
Crossville, Tennessee
United States
Steer Axle
Hoist Liftruck
Bedford Park, Illinois
United States
Drive Axle Components
AxleTech International
Oshkosh, Wisconsin
United States
Hydraulic Filters, Pumps & Valves
Parker Hannifin
Elyria, Metamora, Youngstown, Ohio
United States
4. OPERATOR COMFORT For maximum performance an operator must have all the essential tools around them. The P-Series is designed
with advanced ergonomics for maximum comfort and visibility.
www. h o i s t l i f t . c o m
STANDARD FEATURES
lMeets ANSI B56.1 FOPS operator protection
lIsolated rubber mounts between cab & chassis
lFinger-tip hydraulic controls designed to move within the full
range of seating positions; optional multifunctional joystick
lKey-lock doors and greaseable hinges; Exterior locks secure
door in open position
lDashless cab for added leg room & improved visibility
lTilt-steering column. Easy entry and exit
lAdjustable air-ride seat and retractable seat belts
lLow, non-skid steps & handrails provide 3-point contact
l Insulated floor, cab walls and doors
lPin mount doors; greasable & removable
lTinted glass to minimize glare.
lIndividually controlled front/rear wipers/washers; optional top wiper/washer
lTop glass shade with steel overhead guard
lCab heater with optional defroster and fan. Optional air
conditioning unit available
lOperator fan
lEmergency stop button
lDirectional/gear-shift lever on steering column
l MD3 display shows hour meter, all engine functions, filter restrictions,
low battery and RemoteTech functions
lSpring-applied, hydraulic-released parking brake
Directional/gear-shift lever on
steering column
Controls and gauges are located
out of the way, but easily within
operator’s reach.
MD3 display, located on the armrest
with fingertip hydraulic controls,
provides digital gauges for water
temperature, fuel level and oil
pressure. Other features include
tachometer, battery indicator, parking
brake indicator and RemoteTech
warning/service messages.
“Dashless” cab provides more
space and visibility for the operator.
Eliminates incidental damage to
gauges and controls previously
located on the dashboard.
Cab heater with defroster and fan. Optional
air conditioning unit available.
In addition to the tilt steering column
and air ride seat, the “dashless”
design provides more legroom and
easier entry/exit for the operator for
superior ergonomics and comfort.
5. SUPERIOR VISIBILITY The P-Series is designed with a wide-open mast and unique low-profile counterweight to provide the operator
with unobstructed views in all directions.
The P-Series’ two-stage, wide-view mast (optional three-stage and free lift masts available) is made with
welded-nested channels with lift cylinders secured directly behind the mast rails and the lift chain and optional attachment
hosing located inside the inner mast rail completely out of the operator’s view.
The standard low-profile carriage includes pin-mount, machine-contoured forks [located in low or high position]
that provide maximum strength, visibility and no load damage. Slope pilers, rotators, side-shifting fork
positioners, and independent fork positioners are all
available options.
lStandard overhead-tilt cylinders provide
excellent stability and visibility
lMain rollers are lubricated and sealed
lMain/side thrust rollers reduce friction;
impact-resistant
lMast pivots constructed with wear-resistant
bronze bushings and hardened steel pins;
Mast pivots are also greaseable
lOptional accumulator in lift and tilt circuit
reduces shock on mast and load
lSafety valves built into the base of lift
cylinders provide controlled lowering
in the event of a hose failure
lChrome-plated rods on cylinders for
easy seal replacement
www. h o i s t l i f t . c o m
6. POWER & RELIABILITY The P-Series carries on the Hoist reputation of reliable and durable liftrucks. While some high-quality
components are optional on other liftrucks, Hoist makes them standard for a true heavy-duty forklift designed to
exceed customer expectations.
The high-performance Cummins electronic turbo-charged engine is proven to stand up to the most
rugged applications. The diesel engine meets current emission standards and is extremely quiet.
l160HP to 380HP models available depending on capacity
lLatest Tier Compliant Engines available
lElectronic engine diagnostics with fault code history
lBuilt-in engine protection system
lTwo-stage heavy-duty air cleaner with electronic restriction indicator
lHeavy-duty isolated anti-vibration bolt-in drive line mounts
l Outboard muffler with optional purifier
lBolted open-core radiator with high-capacity cooling system
l100-amp alternator with built-in regulator (amps vary with capacity)
lOptional GM 5.7 or 8.1 LP gas engine (available on certain models)
The Dana 32000 & 36000 three-speed powershift transmissions are supplied with declutch as standard
providing the operator with optimal hydraulic control. The quality transmission reduces premature
failure, as well as prevents directional shifting until travel speed
is less than 1 mph.
lTransmission cooling through a dedicated heat exchanger included
in the charge air/radiator assembly
lA conveniently located remote-mounted filter purifies oil efficiently
l12-plate modulation for smooth forward/reverse shifting and
added durability
The load-sensing hydraulic system performs heavy-duty tasks quietly while reducing power demands
and improving fuel efficiency. The system delivers responsive braking and steering functions, as well as
prevents engine stalling when hydraulic functions are deadheaded.
l O-ring face seal fittings on entire system to prevent oil leaks
lTilt-lock valve with counterbalance to prevent mast drift
lLarge bolt-on hydraulic tank with suction strainers and high-capacity return line
filters for maximum efficiency.
lFilters are easily accessible for quick replacement
lLarge clean-out covers on the top of the tank for easy access and convenient
drain plug on bottom
lEasy to maintain external sump tank
provides additional system cooling
lMulti-gauge provides quick and easy
pressure readings with a twist of the
dial; Eliminates the need to tap into
hydraulic lines.
www. h o i s t l i f t . c o m
Hydraulic pressure can be easily
read by lifting up a flip-open step
and twisting gauge. This eliminates
downtime due to hydraulic system
issues.
7. lStandard 12 volt electrical system
throughout forklift
lAll electrical wires are color-coded and enclosed with a
split-tubing wire loom wrap using sealed weather pack
connectors
lTwo 12-volt, industrial batteries mounted in the lower
flip-open step compartment for easy accessibility
lEasily accessed automotive style fuses
lElectrical system controls the LED headlights, tail lights,
turn signals, backup lights, marker lights, brake lights
and LED amber strobe light; All lights are completely
sealed and last approximatley 10,000 hours
REMOTETECH Utilizing CANbus technology, RemoteTech is a vehicle management system incorporated into the P-Series that
provides service alerts, preventative maintenance data, vehicle monitoring, automated customer support and
the ability to customize vehicle functionality. If any issues are detected, the RemoteTech system will inform the
operator via the in-cab display and has the capability to advise maintenance/management personnel via email.
Vehicle functions can be quickly adjusted to accommodate operator or company preference in mere minutes.
Service technicians can also quickly identify issues through onboard electronic diagnostics and view/download
fault code history.
lUnlike similar systems that rely on third-party companies to program and troubleshoot the system,
RemoteTech is programmed and operated solely by Hoist. Customization and adjustments are made
quickly to reflect customer’s preference
lDecreases downtime and repair costs by identifying and resolving issues early
l Parameters such as vehicle/lifting speeds and electronic fingertip control functions can be quickly and
easily adjusted
l Detects issues such as clogged/failing filters, overheated engine and vehicle overload and impact
l Great for fleet management. Record and monitor engine hours, service intervals and operator usage.
Limit access to specific operators with individual key code capabilities
www. h o i s t l i f t . c o m
Issue(s) detected
by RemoteTech
Operator notified
Authorized
personnel notified
via email (optional)
Issue(s) addressed
by service tech
8. UNPARALLELED STRENGTH
Hoist’s line of quality liftrucks starts with a strong foundation. The P-Series chassis provides strength and
durability by distributing weight evenly throughout the liftruck. The low-profile counterweight is designed to
provide full lifting capacity without obstructing the operators view. The advanced chassis design allows the
P-Series to be both compact and maneuverable, yet strong enough for the most demanding applications.
l100% welded steel chassis with heavy steel cross supports
provides strength and durability for heavy loads and rough
environments
lLow chassis side plates allows easy access to the drive train
l Counterweight designs are low-profile for superior visibility
and increased maneuverability
lFuel and hydraulic tanks bolt onto chassis providing maximum
protection, simplified hosing, convenient fill points and excellent
heat dissipation
lIntegrated lifting points for safe handling & transport
www. h o i s t l i f t . c o m
9. FULL CAPACITY RATING
Did you know that many other truck manufacturers lose as much as 2,500 lbs.
or more on the rated capacity when adding a feature such as a side-shifting
fork positioner? Not on a Hoist forklift. When you order a Hoist forklift, you
receive the FULL capacity even if you add a feature such as a side-shifting
fork positioner. So when you order a 36,000 @ 48, you WILL receive a true
36,000 @ 48 forklift.
Hoist manufactures ONLY rugged, heavy-duty forklifts with premium
components and features, while maintaining competitive prices. We don’t
offer various levels of forklifts, such as light-duty or base-level models.
With Hoist, you know what to expect from our machines: a solid, heavy-duty
workhorse.
AXLETECH PLANETARY DRIVE AXLE
l Specifically designed and rated for
durability in high-capacity off-road applications
lUnit is bolted and dowel-pinned in the chassis
lForce-cooled outboard wet disc actuated
brakes, with separately filtered oil, reduces
premature wear, extending life of brakes
lBrakes can be serviced through the wheel
ends without removing entire drive axle
HEAVY-DUTY INDUSTRIAL STEER AXLE
lThick top plate on welded beam steer axle provides added
strength and durability
lHighly maneuverable in tight areas
lDual-action bolt on cylinder is protected by heavy steel
support beams and provides effortless power steering
lLower maintenance costs due to minimal amount of
moving parts
lEasy access to lubrication points
lSealed tapered roller bearings
lHigh-impact greaseable composite trunnions
PAINT/FINISH
lTwo-part rust-inhibiting polyurethane base coat and two-part polyurethane top coat for corrosion protection
lChassis, Counterweight and Mast are painted; Balance of truck is powdercoated
lPowder Coat is 4 to 10 times thicker than traditional spray paint resulting in greater scratch and chip
resistance
lEnvironmentally Friendly: Unlike traditional spraying powder coating produces zero, or near zero VOCs
(Volatile Organic Compound)
www. h o i s t l i f t . c o m
10. P-SERIES OPTIONS
MAST & CARRIAGE OPTIONS:
l2-Stage Hi-Vis Mast
l2-Stage with Free Lift Mast
l3-Stage Mast
lAdditional Work Lights
lCoil Grab Hooks
lCoil Ram with Side Shift
lExtended Height Carriages
lExtended Width Carriages
lFork Mounted Container Handlers
lForging/Foundry Billet Grabs
lIndependent Fork Positioner
lIntegral Coil Ram
lKissing Coil Radiused Forks
lLift/Tilt Accumulator
lLumber Forks
lMagnets
lMono Mast
lMultiple Pallet Handlers
lOil Line Reel Lifting
lPallet Forks
CHASSIS & CAB OPTIONS:
l12V Power Outlets
lBattery Disconnect Switch
lAdditional Operator Fans
lAir Conditioner
lAir Filled, Foam Filled or Solid Tires
lCold Weather Packages
lDefroster
lDVR Recorder
lExternal Cab Air Filtration System
lExtended Cab Height/Riser
lFire Extinguisher(s)
lForward/Rear & Combination
Camera/Monitor Packages
lFire Suppression Systems
lForward or Mid-Mount Cab
Positions (On Certain Models)
lFully Enclosed Cab
lHeater
lHydraulic Weight Scale
lImpact Sensor
lOverload Protection Indicator
with Lift Interrupt
www. h o i s t l i f t . c o m
lPipe Hold-Down Clamps
lQuick Change Carriage
(Forks to Coil Ram)
lQuick Disconnect Hydraulic
Connections
lRotators
lSide Shifting Fork Positioner
lSlope Pile
lTire Handler
lPedestrian Detection System
lPre-Cleaner Intake Filter
Above Engine Hood
lRemovable Counterweight
lStep Lighting
lTop Wipers with Wet Arms
lTire Pressure Monitoring
System
lTrainer Seat Cabs
MANY ADDITIONAL OPTIONS & PACKAGES AVAILABLE. CONSULT YOUR
HOIST REPRESENTATIVE WITH ADDITIONAL INQUIRIES
11. SUPERIOR SERVICE Hoist values our customers and understands the importance of maintaining relationships beyond the point
of sale and is dedicated to providing quick parts support and satisfying service. The P-Series is designed to
allow easy access to all integral components for maintenance and repair. Every component on a Hoist liftruck is
sourced from the United States, with more than 75% of the components manufactured by Hoist. Over $5 million
in parts inventory is maintained in stock, allowing Hoist to provide the quickest replacement part lead times in the
industry and provide excellent 24/7 parts/service support.
Your satisfaction is our #1 Priority! Our customer service doesn’t end when you purchase a Hoist Liftruck. We
want to ensure your satisfaction with Hoist for as long as you own our product. We understand the importance
of minimizing downtime for repair or maintenance. Many companies lose hundreds, even thousands of dollars
for each hour of downtime. Hoist’s dedicated and knowledgeable staff is ready to assist you 24/7 with everything
from parts to service support.
Every Hoist liftruck is backed by a company dedicated to complete customer satisfaction.
From the initial contact, through the sale and for as long as you own a Hoist liftruck, our
experienced staff works for you.
Hoist also has a worldwide dealer network that keeps a majority of its replacement
parts in stock for immediate pick up or delivery, as well as technicians to assist with
preventative maintenance and repairs. Visit www.hoistlift.com to locate your nearest
Hoist dealer.
www. h o i s t l i f t . c o m